MikroTik

DjAtif

hey guys, i have installed mikrotik on existing network. Mikrotik ccr1036=====>Fortigate firewall==========>Layer 2 switch Mikrotik LAN 192.168.50.1 255.255.255.0 & WAN PPPOE fortigate firewall WAN static IP 192.168.50.2 255.255.255.0 connected to the mikrotik LAN fortigate LAN 172.16.0.1 255.25...

DjAtif

Possibly an IP conflict, can you change the mac address on port facing ISP on the mikrotik to the previous ISP router mac address Solved champion my ip is dynamic from ISP tried to reboot but still getting same ip so finally when i got new ip all system starts working fine. Guys thank you all be sa...

DjAtif

I have problem only to access few webs even I can’t open our web MikroTik. Https webs aren’t working (not all) tried to hard reset and re config again twice but results same. Same device i used two months ago and working still fine with same ISP. However the current device is reacting strange and if...

DjAtif

Paste this on terminal /interface detect-internet set detect-interface-list=none /ip address set [find where address="192.168.1.1/24"] interface=bridge you have pppoe-client or dhcp client? if you have only pppoe-client paste also this: /ip dhcp-client remove [find] on nat you have 3 masq...

DjAtif

its really giving me hard time anyone can help me to get rid out of this. [admin@MikroTik] > ping forum.mikrotik.com SEQ HOST SIZE TTL TIME STATUS 0 159.148.147.239 timeout 1 159.148.147.239 timeout 2 159.148.147.239 timeout 3 159.148.147.239 timeout 4 159.148.147.239 timeout 5 159.148.147.239 timeo...

DjAtif

I think MTU is the magic word (as you were looking already). Have you contacted your ISP in regards to this? What MTU was your previous router set to? pervious router mtu 1480 & mikrotik running on same mtu i have tried 1492, 1500, 1470 but still no luck. if i am putting back pervious router it...

DjAtif

[admin@MikroTik] > export # oct/14/2021 12:49:41 by RouterOS 6.49 # software id = cccccc # # model = RB3011UiAS # serial number = xxxxxx /interface bridge add admin-mac=xxxxxxx auto-mac=no comment=defconf name=bridge /interface pppoe-client add add-default-route=yes disabled=no interface=ether1 nam...

DjAtif

i just did quick wizard setting

added PPPOE added DHCP & changed LAN subnet by default to the one i have now.
internet is working but mostly websites aren't working just few working.

DjAtif

i am using 6.49 router os & i set DNS rule because without that i can't even use google.com. my network is simple switch and 5 PCs. i am not having any firewall previous router was working fine i just installed MT yesterday with same subnet. in PPPOE MTU 1480 default i tried to change 1492 1500 ...

DjAtif

Good day!
i have RB3011UiAS with latest update i am having issue i can't open many websites
mostly "https" even www.mikrotik.com i cant open & ip cloud service also not updating
please help thanks.

DjAtif

hello to all Linksys WMP54G v4 pci adapter is working in Mikrotik router os as a AP?
thanks

DjAtif

thanks for replying

DjAtif

hell to all, i have wireless network upto 35 clients i am providing internet for the last 4 years.but now my clients force me please share some stuff like Movies, Softwares etc. My question is its possible can i use mikrotik ftp for this purpose coz i have 250 gb hdd for caching & Mikrotik using...

DjAtif

hide your ssid

DjAtif

today i have made antenna & its very better then 15 dbi omni antenna my each client have 3 times high signal after i replace antenna must try thanks

DjAtif

On this page you will find information on how Pe2eR builds a sector antenna for de Wifi 2,4GHz ISM band. The design was published by Dragoslav Dobričić, YU1AW. Most of his work is in Serbian, but Dragoslav and Pe2eR have corresponded in English. they differ a little about the dimensions of Dragoslav...

DjAtif

anyway to check radio power coz in tp link web show the 20 dbm max but i have secter antenna 12 dbi & clear LOS but my signal is very low any one have idea?

DjAtif

Hi to all!

I will evaluate to make a link of about 80 km, oversea.
Site A elevation: 100 m
Site B elevation: 500 m

I need about 100 MBit real TCP througput... it's possible with Mikrotik board?

its not possible 100 mb link

DjAtif

Software Specification Standards IEEE 802.11g, IEEE 802.11b Wireless Signal Rates With Automatic Fallback 11g: Up to 108Mbps(dynamic) 11b: Up to 11Mbps(dynamic) Frequency Range 2.4-2.4835GHz Wireless Transmit Power 20dBm(MAX EIRP) Modulation Type 1M DBPSK, 2M DQPSK, 5.5M/11M CCK, 6M/9M/12M/18M/24M/3...

DjAtif

i have atheros 5213 chipset based card (Tp link wn 651g 100 MW) & 12 dbi 90 degree sector antenna but my client have very low signal distance clint to Ap only 5 to 800 meters with clear LOS.
& client side using 10 dbi directional panel antenna

DjAtif

what is exactly price of R52H with shipping charges

DjAtif

today i wanna but R52H module in MT franchise but in here R52H price is 90$ wtf???

DjAtif

good home lolllllllll

DjAtif

anyone have idea ???

DjAtif

thanks mate i have done it

DjAtif

i have mikrotik network but previously i m using not mikrotik wireless i m using Senao outdoor Ap & all wireless clients copying data from network is fast mikrotik bandwidth shaping is just for internet but now i m using mikrotik wireless & its good but network sharing is involve with mikrot...

DjAtif

today i have installed wireless interface on MT i have cable network & working fine in wireless setting i have done in my laptop show signal from my AP but no browsing please help me how to configure wireless in MT

DjAtif

hello to all
i just want to know R5H module maximum outdoor range in Omni Antenna 15dbi on 2.4 ghz mode Thanks in advance

DjAtif

thanks alot

DjAtif

Normis plz reply me my clients are waiting please tell me which mikrotik hardware is best for me on this stage i need just 2km range in radius

DjAtif

i have Wireless PCI Adapter TL-WN651G (TP Link) my question is can i used this card in MikroTik as a access point? if yes then tell me my each client have Wlan card with outdoor antenna they are connect to this card please Help Thanks in Advanced

DjAtif

Hello
i need 2 KM coverage in radius client side using wlan card with outdoor 3 to 5 dbi omni antenna or directional but i need full 2 km coverage which hardware is best for me i have mt x86 based router which AP & antenna is best for me i have now 20 clients thanks

DjAtif

Normis????

DjAtif

but i m confused tell me bro its work? or not

DjAtif

I have NL-3054MP 200MW Atheros chip sets based wireless 802.11a/b/g device.& i have MikroTik x86 based router anyone know about this mini pci card its working with MT wireless Thanks

DjAtif

hello i have x86 system based Mt router & i have senao 3054 mini pci card can i use as a Ap in mikrotik?

DjAtif

ok normis then tell me what is my solution's buddy i want to provide service in 5 KM roundabout i have 3 secter antenna's 120 degree 20 dbi 1 watt booster what you suggest me which AP is good for me coz i have more then 400 clients & each client have must 1 mb bandwidth. I am using in client sid...

DjAtif

Dear Normis i m willing to have such a base with AP's, Amplifier, Secter Antenna's etc that in the range of 5 KM in a dia meter client can access connectivity easily at wireless USB lan card without any external outdoor antenna means that just like mobiles a person can easily connect with our base i...

DjAtif

hello everyone i have a small wireless network i want to increase range my network anyone have a idea for a professional field bcz i want to provide service in 5 km distance & i have 300 plus users which AP i m use antenna's amplifier etc any one interested pm me thanks in advance

DjAtif

its my servers one of MT & one of squid lolzzzzzzz

DjAtif

hello to all Senao NL-3054MP PLUS 200 mw mini pci is working on MT?

DjAtif

hello i have x86 system based Mt router & i have senao 3054 mini pci card can i use as a Ap in mikrotik?

DjAtif

normis listen i have Atheros 3054 MP PLUS ARIES mini pci device 200 mw.its possible can i use as a AP mode in x86 system based mt router.

DjAtif

dear normis i have x86 system based router Mt wireless AP work on it? kindly tell me the about MT wireless equipments power & ranges thanks in advanced

DjAtif

normis i dont have mt wireless i have senao wireless AP if its possible to attach ap into router directly & control the wireless clients & wds sessions in MT?

DjAtif

you can just disable intercommunication in the switch, if it's smart enough. if it's a dumb switch, you will not be able to block sharing, because communications between users will not even reach the router, they will go though switch

can in attach my wireless Ap directly into router?

DjAtif

Here is my network

DjAtif

2.9.51 i have block TCP, UDP ports but still problem \\192.xxxxxxx assessable to to all clients i want to block all network sharing data & also computer name show in network places

DjAtif

no such argument (port) error apear ????

DjAtif

hello i want to block all netbios session ie network sharing because i m using wireless network & i have total 10 mb connectivity so i wanna block netbios. how? thanks in advance

DjAtif

how to check?

DjAtif

Hello i have problem in dhcp server for the last 2 days my client trying to connect but he have still prob limeted service.whats the problem?

DjAtif

use PCQ

DjAtif

Hello to all i have 2 adsl modems with ip address of 192.168.0.1, 192.168.0.2 & in mikrotik i have total 2 LAN cards WAN & LAN its possible to add 2 gateways in Mikrotik WAN i have 1, 1 mb 2 dsl connection & i also want to combine bandwidth to clients 2 MB.Because my phone line is not su...

DjAtif

listen i have 2 client in 256 kb pool & when 1 client i s not using internet 2nd client have full 256 kb speed have & when both are using bandwidth is split into 128 kb its possible i m using pcq limit download is 512kb & upload is 256 kb but my all clients have 512kb speed why? i share ...

DjAtif

hello to all i m confused i have 5 mb bandwidth & i have 45 clients. 20 clients are corporated & all of other clients are home users. My question is 1: My all corporate clients must have 256kb Bandwidth 2 :I want to share bandwidth into home users means in a pool have 256 kb bandwidth & ...

DjAtif

hello i have a small isp & i m using MT as a hotspot server if it is possible i have 3 cybercafe cafe connection & i want to through service into cybercafe PPPOE means my all home users connected via hotspot & my all cybercafe users connected via PPOE it its possible tell me how ?? Thank...

DjAtif

thanks its working

DjAtif

hello I have configured only Mt as a hotspot now i want to enable proxy & cache bcause i want to ban & redirect some websites but i want to still in hotspot its possible if its possible tell me how?
Regards

DjAtif

I have MT 2.9.6 OS configured in simple hotspot & also bandwidth control biut i want to know how to set priority in mikrotik i have total 50 clients & 5 mb bandwidth some clients downloading something with high number of connections other users faced problems in messenger voice webs plx help...

DjAtif

its very lengthy topic bro listen i have no idea i have small isp upto 50 clients & i have 5 MB bandwidth i have configured MT as a hotspot simple bandwidth limit but i faced huge problems please send me screen short or any video tutorial then i am manage it via winbox brother i liked MT because...

DjAtif

Hello to all i have Mikrotik router OS 2.9.6 i am providing internet through hotspot now i faced a huge problems i dont have big bandwidth. All clients have limited bandwidth but i want to set limit numbers of connection on spcific destination ip i.e www.rapidshare.com because some client using down...

DjAtif

no wireless lancard clients

DjAtif

no i m using just simpale NAT by firewall masqeurade & i can't change into hotspot or pppe any one have idea??

DjAtif

Hello i have a problem i have more then 50 clients have there own speed limitation but the mostly clients change the NIC mac address to other clients & using internet i want to stop MAC cloneing how? i have option for hotspot & proxy but i want to provide internet in same method i.e now i m ...

DjAtif

I am from Rawalpindi PK dear all things done look this picture

DjAtif

Hello i have mikrotik router os 2.9.6 & working fine all cable network & wireless lan cards network but whats problem wireless AP to wireless lancards service is ok but AP to AP wds mode networking is ok client AP to Main Server Ap ping reply time is 1 to 2 ms but internet is not working Mik...

DjAtif

Hello to all i am using Mikrotik router os 2.9.6. i want to hide my ip address in clients side
Example i want to hide my internet ip in ipinfo websites i.e www.cmyip.com etc its possible? thanks in advance

Search found 68 matches