Dear Friends
I have 260gsp and want all the port to act as trunk ports. like the configuration on the ubnt tough switch below.
Any help will be welcome
Thanks
Dear Friends
It will also be helpful to add thing that actually works
as per the changelog.
Thanks
l don't think mikrotik is totally bad. Even though they can do better.
Keep up the good work.
Please the whole world production is full of Bugs.
Cars ,Medicine and even Jets.
My 2 pesewas
Am running 20 dsl lines on it.
Each 12/1 mbps. All the crs will just act as vlan switch wit ccr doing the pppoe dialing and load-balancing.
Any idea.
Thanks
yes but how can l do that. Currently using sms service provider. how to l modified the following api to work with sending sms using Mikrotik. Thanks <?php /***************************************************************************** ** Name: api_sendsms ** ** Description: This function is used to s...
Please need help with HotSpot external logout page .
Also HotSpot external Status page.
l have read throughout the site and pick pieces of information which help me to get the login working .
A sample will help.
I used to have the Queue tree working in 5.14 but when l upgrade to 6.0beta2 it all became inactive and i now only have global. Can someone show me how this is done in 6.0 Thanks /queue tree add name=hotspot-exempt-up parent=global-in packet-mark=exempt-up queue=exempt max-limit=1G add name=hotspot-...
l had being using hotspot since 2.9* to 2.9.51 all the features were working as advertised for hotspot. configuration was ssl enabled hotspot with anyip working .that is client computer can have both proxy and anyip they still will get the login page . then my server we dead(86x). l got a replacemen...
Dear Gurus I have being have a challenge with my hotspot setup and will need help. Every thing was working fine with 2.9.51 until l started hitting CPU 100%. l therefore change to 4.17 to be able to use multiple cpu . The installation was smooth and the CPU is now 40% on the new system with same old...
lsp like.png Dear Friend l will be very grateful if someone can point to doc which will help me achieve the following. To be able to use ospf between Router G and both router p and Router H . So that l will not need any nating on router H or router P for my clients to browse the net. Am not getting...
l can confirm that since 3.X to 5.X..
you can't get the hotspot login page if the server has https enable login page and the client has a proxy configure in the browser.
it shows ssl error.
But works fine in 2.9.X.
Thanks
l have Ap 433 And 5 client 433 all have 5.07rc ap is Ap-bridge mode with nv2 and all the clients in station-wds with mode=any the clients are able to reach the server but they can't ping any other thing on the network. l can ping any device on the network but can not ping the mikrotiks with 5rc7 fir...
Dear All l will first like to wish you all happy new year. l am not very new to mikrotik but new to ospf. l will like to use public ip on mikrotik hotspot. My plan is to creat an address pool of the hotspot to the public ip so that the client only get public ip aftrer a suceesful log on. l search fo...
Dear Friends l have a hotspot implementation on 2.9.51 and server crashed .l then moved to a new installation on 3.x latest version. but now the Zero Configuration feature for hotspot is not working when l active HTTPS on the hotspot and the clients have proxy setting in their browser. it only work ...
l will be very grateful if you will get me a hotspot pages that can run on apache server.
l getting even more confused.
looking forward to hearing from you.
thanks
Dear All
l will like someone to help me get mikrotik login pages on an external server for a fee.
l have a dead line to get this done.
Any body interested should send me his or her contact.
thanks
l used dream weaver to change the login.html to login.php
l then put the login.php to my Apache server.
l get the redirection to the login page on the server but can't login.
Will be looking forward to any help u can offer.
Thanks in Advance.
Rainmaker
Dear SurferTim Please l will like to use external server in order to use the login page to provide profession information to visitor. With mikrotik in built web server most of the web application will not run on. l tried what you direct but is not working. Here is what l did l copied the hotspot fol...
l also looking for the same solution. when it redirect to the external server and l try login in . l get not found the requested URL /hotspot/$(link-login-only)was not found on these server. then the url will change to https://dwu.newse.com/hotspot/$(link-login-only) What am l doing worry. Any help ...
Dear Friends l am new to mikrotik but l have learn a lot on how to configure it.l have a hotspot server with L6 and ver 2.9.51. l would like to install the login pages on an external apache server. l have changed the login.html to redirect on codes l found on the forum(fewi's contribution).but am st...
Dear Friends
l need help to configure hotspot on 4.0 or 5.0 to handle miss configured DNS, SMTP-server and even IP-address. Also miss configured proxy.
Thanks
Dear Friends
I will be very please if an expert can recommend a proxy service provider .
l need it for a hotspot service l run to over come Geo location restriction.
Thanks
am planning to deploy a service for 300 users hotspots concurrent users with 450g.l will be using simple queue and total bandwidth will be 30-40 mbps.
Can it handle it.Any better idea will also be appreciated.
thanks
We in the developing countries face this issue and most cafe timers have solved it nicely. We want to prevent seat heaters.they occupy your seat fill your cafe but at the end pay very little. Cafe timer then are made to charge a little for just sitting in the cafe.minimum cost .Charges in block of 1...
Dear Friend l also have a 2.9.51 on a server serving 250 hotspot users with 500kbps each. The system is as solid as diamond. This is running on PIV 3.0G 2G ram and 80g hard rive. no proxy .It never freezes or crashes .l once upgraded this server to 3 and later 4 it then started crashing .the hotspot...
Dear Mikrotik we all live on their innovation.l have setup a network with 200 hundred nodes and at an average of 100000 usd. Big companies around still wonder how l could achieve such a network without out a bank loan and the network being solid. The secret is Mikrotik.They laught at it when they sa...
That is good news,if they know about mikrotik to the extend of producing a propaganda document to discredit it then mikrotik is competing very well with moto.l like mikrotik and wish they listen to they clients for feedback and develop products the suite their clients needs. The next product which m...
just upgraded to 4.0 with the userman in the folder which turns up being same as the 2.9 userman. after updating the lience it has change to level 5 , but when it was 2.9.51 and 3.0 it has been level 6.
now it says limit session to 50.What should l do.Life system
Help help.
thanks
son of rainmaker
normis With all due respect kindly test your software before you release them. the userman is bad .slow and leaks memory ,consum cpu and lastly unstable. why not just get a few forum beta tester to just check on it before you upload them.l have tested it on all board type and x86 1gb mem and same pr...
Dear All
need help on how to prevent mac spoofing on a mikrotik bridge so that client will not be able to steal the hotspot seccion of each other and prevent inter interface communication in a bridge.
thanks
Dear All There have been examples of PCC match when the clients are on a single LAN or network. Can some one convert one of these numerous examples to a network that uses pppoe or specify ip address. Have been trying but get confused as to where to change the interface to ip address. Any help or ide...
Dear All There have been examples of PCC match when the clients are on a single LAN or network. Can some one convert one of these numerous examples to a network that uses pppoe or specify ip address. Have been trying but get confused as to where to change the interface to ip address. Any help or ide...
Hi Friend
open your winbox and click on the tab with dots at the end of the space for ip.it will open a drop down list which will show you your router and it,s mac address .Click on the mac address and that will appear in the space for ip address and click on connect to.
Hope the helps
Dear All Thank for you help so far. Your examples is towards Ethernet user with static interface. how can i adapter it to suit dynamic interface such as pppoe server. how should l define the in-interface in this case? The other problem l have is the up link mangle rule what should l do if am using p...
Dear All
l Have EMP8603 cards which use to show 25 dBm in winbox tx. But now in the 3.17 to 3.23 it show 19 is this card also having offsett for tx power.
Whick is the best high power card for outdppr hotspot with 15 db omni 2.4ghz.
Thanks in advance
Dear friends
l need help on how to do load balancing on 6 dsl with the same gateway.
Currently l have a mikrotik 3.20 on Piv with 3.0 ghz and 8 nic.
but any suggestion will be gladly welcome.
Thanks