That worked perfectly. Thank you.Make a backup of anything on .backup and .rsc format
<SNIP>
Indeed. This was a machine I brought up years ago to do various testing with when I had plenty of normal spare licences.Use the chr version is better optimize for virtualization and you can transfer license
HD's gone! Managed to delete it when I meant to take a copy of it. It's all going wrong today!In the iso version... You can still recovery if you didn't delete the virtual HD...
:-) That shows how long it is since I've needed to generate one then!That is "normal", also for 6.47 versions. It does not always take half an hour but it can take considerable time, being stuck at 7 or 8%.
Update - after around half an hour, it jumped to 100% and finished!I then tried to do a sup-output on the CCR, but that got to 8% and then did nothing more.
Yes. Find the link for the latest version for your hardware and edit it... SoAlso can I get 2.11 back?
Nope. Just tried it. Still saturates the network. So I can't find any combination of active/passive/static that worksFor lag config you would set both sides to active to have them participate in the group.
I'll try it - 2.11 didn't work when they were both active, but worked perfectly with active/passive, so maybe I did it wrong because it was the only thing that was right.For lag config you would set both sides to active to have them participate in the group.
"Unable to create the folder 'sessions\'. The system cannot find the path specified."
Still get the same error and yes, standard Windows paths.Try the new "clear cache" button. Also, do you use Windows and a standard path?
Yes.Please make sure ipv6 package is enabled
Yes.and than tunnel is up.
Definitely isn't.Otherwise IPv6 link local should be generated properly.
Will do.Contact support with support output file, if it does not work.
Then I don't know what I've been downloading because the torrents I've got for 6.22, 6.23, 6.24 and 6.25 all include cm2 (as well as the netinstall-tile which doesn't appear to be on the download page).By the way, torrent did not include those non-standard packages anyway
Because the ALL package was only available by torrent.How is torrent related to what you asked for?
Why? Nothing you have said would indicate this as a cause of the problem.I believe it has to do with forwarding specific port on router
/interface ethernet set [find default-name=ether1] mac-address=01:02:03:04:05:06
Once the components have released their magic smoke, there is no option but to return the board to your supplier (assuming it's under warranty) or throw it away.After a couple tries i noticed a very very thin line of smoke.
I guess I'd have to ask what it is you're trying to achieve.Any ideas on that part?
Use the time parameter in the mangle rule to ensure that the packets are appropriately marked at the correct time of day. Then queue based on packet marks.I want to make bandwidth unlimited from 05:01 o'clock to 07:00 o'clock...
This is something I would find useful. Ideally there should be three timeouts available: DNS lookup, connection and completion.is it possible to add timeout option to fetch tool.
I have one board it runs fine on, but another doesn't. Disabling wireless does seem to cure the problem though. Is this a known error? Can I not run the MC8780 and WiFi at the same time?are you sure that this modem works ok also in v5.26 with wireless card enabled?
Please post the relevant portion of your configuration.Can any one help me with this ?
Yes - sorry, my mind was elsewhere and you are correct - for you this is not a good solution. Instead, create a new PPP profile for each connection and use the 'incoming filter' to do the check/drop.in-interface=unknown and this is bad solution..
Yeee-ouch. That's nasty and I'm surprised it works at all.similar to this http://www.dslreports.com/faq/16710.
What do you want to know?Please advice
I am afraid I have no idea what you mean. Maybe it would help if you could draw a network diagram.i have 2 ppoe accounts, i succeed to make a ppoe server from the first account, but now i need to make 2 ppoe servers, so each server provide internet from diffrent accounts.
It is very unlikely that anybody will be able to guess what your configuration is. I don't think you will get any sensible answers until you provide sample configurations, debug/log messages and possibly a network diagram.Can anyone help me
Sorry. That's way too confusing. I am afraid that I have no idea what you are trying to achieve. Perhaps you could provide a network diagram?my setup is
Mangle rules, mark connections and routes. Then route according to the routing marks. This should all be covered in an MTCNA course.What should I do to make the setup work.
I am afraid you haven't given enough information for us to answer your question. I suggest detailing exactly what you want to achieve (preferably with some network diagrams) and somebody may be able to help.User details database and postpaid billing can be use with static ip ??
The code looks fine to me. I am pretty sure that avg-rtt is only available from flood-ping and I would certainly use flood-ping.Is that correct? Because I got different result with "flood-ping" and "ping" from terminal.
Yes. Have each netwatch run a unique script on up/down which sets some variables (name, up/down, date/time etc. etc.), then each of these scripts calls one script which does the e-mailing. Easy-peasy.Is this something that can be done within the Mikrotik OS?
Shouldn't this beIP Address: 203.153.240.26
Subnet Mask: 255.255.255.252
In my address list I have added a new address:
address: 203.153.240.26/24
address: 203.153.240.26/30
4.3 is incredibly old. Assuming that you have read the wiki section on IPSec and have set your configuration correctly, then this would be my first course of action.is it necessary? because i don't have any privilege to do that.
The Wiki is your friend. Start with http://wiki.mikrotik.com/wiki/Manual:IP ... ng_packets and then have a look at routing.Do you any examples how to mark port 80 (http) to 2nd ISP.
Yes. That's exactly what I'd do. Address lists are your friend.Is there a way we can use mikrotik router OS as a solution to this as they are already using it as a router? Maybe block the sites based on IP addresses of the LAN users as they all use static IPs.
Travelled Easyjet every other weekend for three years when I worked in Zurich. Swore I'd never fly with them again!Easyjet
Indeed. Hence the request to lower (or remove) this limit once somebody has passed the Turing test!This was done to prevent spamming bots?
You forgot to attach your code. I don't think anybody here is psychic, so you're probably not going to get any help unless you can post details of your configuration!my port80 forwarding(hair pin code)
What does this mean? Can you show the output of:After upgrading to 5.21 lost NTP server
/system package print
/system ntp export
/system ntp client print
/system clock print
Upgrade to ROS 5.x.i use RouterOS v4.3 ... what should i do next?
What I am saying is that I suspect your ROS is freezing because the USB or USB disk is failing. Seriously, put an IDE/SATA drive inside the box and don't use USB.There wouldnt be any problem if the ROS wouldnt freeze in such a way I have described.
It's been over eleven months now, is this change any closer?So the change is coming.
Another 11 months and still no response.Year passed and still no response.
Yes. RADIUS is your friend.i want to know if it is possible.
Likewise, check you don't have an open DNS resolver (may be being used for an amplification attack).I'd suggest you see if you have "/ip proxy" enabled - if you do, firewall it so only your interal IPs can get to it.
From what to what? Wireless to Ethernet? Ethernet to Ethernet (which interfaces) or wireless to wireless?But the troughput is just at 50-60 MBs.
Silly question, but is your Ethernet cable plugged into ether1? If so, try again in one of ether2 to ether5.Running "/system reset-configuration" gives the same result - the router is inaccessible.
Easiest place is in a comment field. In my experience, the best place is on the interface the DHCP server is running on (/interface etherX set comment="1.2.3.4") - that way it survives reboots and power cuts.my problem is how to save the old ip \where to put him
Can't be done. You can only have one DHCP client on each interface. You need to do this with static IPs on the WAN interface....the second part is to configure 4 DHCP Clients (with one IP to be masquerade for each LAN port) on the WAN port.
My Routerboard at home is in the garage - is this what you meant?based on statistics, this is in fact a garage item
It's been almost ten months now, is this change any closer?So the change is coming.
Tell me more...*) added support for usb forwarding over tcp;
But what we all really want to know is... What is the water park like?I've now arrived and can report some potentially useful info...
E-mail must have been lost in the post then!! I've resent.I've received email answer with vouchers within 15 min.
Damn. Flight doesn't land until 1900 so it'll be at least 2030 by the time I get to the hotel.Welcome cocktail will be held the evening before MUM (March 14, from 6.00PM)
Thank you, but unfortunately in this case it wasn't a bridge...In ROS v5.7 there is a know issue, where bridge could crash and appear as "unknown" interface. This bug is fixed in ROS v5.8.
Nope. You can provision your own default script if you use NetInstall. This then becomes the script that survives a reset.At a guess that script is baked in as part of the OS image and can't be changed other than as part of it.
That's exactly why I don't want to go to any country that uses the Euro. I only mentioned Germany specifically after your suggestion.isn't the exchange rate to euro the same in all "eurozone" countries ? what's the difference, euro is the same in all of them.
As nice as Germany is, for purely selfish reasons (i.e. the GBP:EUR exchange rate), I'd rather not do anywhere in the EuroZone.What about somewhere in southern Germany?
I'll second that - we're about to book next year's ski holiday and another clash with MUM would be annoying (unless, of course, you don't want me there...!).can you confirm the most likely dates
Argh. Major attack of the stupids. I knew this, I know I knew this. I just got caught up with the incrementing packet counts and stopped thinking.MAC-winbox runs on layer 2
andthis is not correct
So I was correct then - SNMP is borked. It's just that the borkedness can be overcome with a manual tweak...There is a bug in the bandwith values
That's fine, but then you shouldn't have created AAAA records for your existing FQDNs - perhaps 6.www.mikrotik.com and 6.forum.mikrotik.com (or whatever) should have been used until testing's complete?They told us that IPv6 is still in testing stage, and we shouldn't be surprised that stuff breaks
Neither of these methods would work on a large scale deployment - imagine rolling out 100 RBs, each of them requiring a (slightly) different configuration.you can use scripts .rsc file at the time of installation or u can also use Flashfig feature in netinstall.