Community discussions

Search found 265 matches

by Lupin
Wed Sep 11, 2019 8:20 pm
Forum: RouterBOARD hardware
Topic: LoRaWAN support
Replies: 53
Views: 9952

Re: LoRaWAN support

What RouterOS version support LoRa ?
Some preview or screenshots of software ?
by Lupin
Tue Jun 18, 2019 7:37 pm
Forum: Announcements
Topic: MikroTik News June 2019 (Issue #89)
Replies: 38
Views: 10387

Re: MikroTik News June 2019 (Issue #89)

* New MikroTik LoRa products- Internet of things has never been so affordable
When will they be available for purchase?
by Lupin
Mon Apr 22, 2019 10:43 pm
Forum: Scripting
Topic: Fail-Over
Replies: 8
Views: 910

Re: Fail-Over

Can you explain, how it works?
by Lupin
Tue Jun 12, 2018 1:09 am
Forum: RouterBOARD hardware
Topic: CCR1036 MTU not higher 1504 SFP s+RJ10
Replies: 4
Views: 759

Re: CCR1036 MTU not higher 1504 SFP s+RJ10

Janis said
"cannot be changed"

Arturs said
"We will try to fix this as soon as possible"

Find an Agreement! :lol:
A fix will or will not be possible?
by Lupin
Mon Jun 11, 2018 4:15 pm
Forum: RouterBOARD hardware
Topic: CCR1036 MTU not higher 1504 SFP s+RJ10
Replies: 4
Views: 759

Re: CCR1036 MTU not higher 1504 SFP s+RJ10

Reply from support:
The maximum supported MTU in S+RJ10 modules is 1504 bytes and it cannot be changed by software.

Best regards,
Janis B.
no hope :(
by Lupin
Fri Jun 08, 2018 8:54 pm
Forum: RouterBOARD hardware
Topic: CCR1036 MTU not higher 1504 SFP s+RJ10
Replies: 4
Views: 759

Re: CCR1036 MTU not higher 1504 SFP s+RJ10

Same problem

I open a support ticket
by Lupin
Tue Apr 10, 2018 8:48 am
Forum: Announcements
Topic: Significant improvement for 60 GHz solutions
Replies: 45
Views: 15870

Re: Significant improvement for 60 GHz solutions

The perfect product for the 60Ghz, would be a point-to-multipoint solution, clearly with high gain CPE antennas for distances up to max 1km. Possibility to connect up to 50/60 customers on a single cell Channels smaller than the 2000Mhz (1000Mhz or 500Mhz) TxPower increased to 20dB A integrated fail...
by Lupin
Sun Jan 14, 2018 11:10 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 289
Views: 40248

Re: wAP 60G experience

I've made a simple 85mt. link with wAP 60G. Signal is 65, MCS 8.. but when I start to pass TCP traffic across the link signal drop and link go down If I test with UDP BWTest across the link still remain up Why?? I'm running 6.41 Problem in my case is MTU. I lowered from 1700 to 1600 and problem dis...
by Lupin
Sat Jan 13, 2018 7:52 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 289
Views: 40248

Re: wAP 60G experience

I've made a simple 85mt. link with wAP 60G.
Signal is 65, MCS 8.. but when I start to pass TCP traffic across the link signal drop and link go down
If I test with UDP BWTest across the link still remain up

Why??

I'm running 6.41
by Lupin
Wed Nov 01, 2017 7:58 pm
Forum: General
Topic: VoIP - Implemented in RouterOS
Replies: 23
Views: 2482

Re: VoIP - Implemented in RouterOS

What is the Mikrotik's opinion?

Normis, Uldis ? tell us something
:o
by Lupin
Tue Oct 31, 2017 8:41 am
Forum: The Dude
Topic: Feature request - Full featured Web access
Replies: 3
Views: 1669

Re: Feature request - Full featured Web access

Dear Mikrotik team,
Please review a possibility to provide a full featured Web access support to the Dude.
Yes! We need them back
This is the main reason why we are still using 4.0b3 :(
by Lupin
Wed Oct 25, 2017 11:19 pm
Forum: General
Topic: VoIP - Implemented in RouterOS
Replies: 23
Views: 2482

Re: VoIP - Implemented in RouterOS

I doubt MT would spend the time and money developing it.
Do you think it's not an interesting market for Mikrotik?
by Lupin
Tue Oct 24, 2017 11:21 pm
Forum: General
Topic: VoIP - Implemented in RouterOS
Replies: 23
Views: 2482

Re: VoIP - Implemented in RouterOS

How do you mean? Like a PBX?
Yes, a PBX.
Initially similar like a FritzBox, in future powerfull like an Asterisk PBX
by Lupin
Tue Oct 24, 2017 10:27 pm
Forum: General
Topic: VoIP - Implemented in RouterOS
Replies: 23
Views: 2482

VoIP - Implemented in RouterOS

Probably they will already have asked for it in the past, but I want to reformulate the question: are you going to develop a VoIP package? have you evere thought? Mikrotik, with his knowledge and RouterOS with its versatility could make a diamond product. You make the difference on the market today,...
by Lupin
Mon Oct 09, 2017 8:48 am
Forum: General
Topic: CCR 0.3%+ packet loss whenever above 5% CPU
Replies: 26
Views: 3643

Re: CCR 0.3%+ packet loss whenever above 5% CPU

What router model and what ports are you using? From your video it looked like a 1072. You are not using the Ethernet port are you? If you are https://forum.mikrotik.com/viewtopic.php?f=3&t=125361 On 1072 sfp-plus3 with 10Gbps Fiber On 1016 sfpplus1 with 10Gbps Fiber sfp module is: https://mikrotik...
by Lupin
Sun Oct 08, 2017 11:13 pm
Forum: General
Topic: CCR 0.3%+ packet loss whenever above 5% CPU
Replies: 26
Views: 3643

Re: CCR 0.3%+ packet loss whenever above 5% CPU

Have you find a solution? Are you sure that the 1016's themselves are the cause of the loss, and not the intervening connectivity? In general, loss is associated either with a single core being maxed out or close to maxed out (90% or higher), or congestion. See the video https://youtu.be/Mrr6Ubh8hW4
by Lupin
Sun Oct 08, 2017 10:35 pm
Forum: General
Topic: CCR 0.3%+ packet loss whenever above 5% CPU
Replies: 26
Views: 3643

Re: CCR 0.3%+ packet loss whenever above 5% CPU

conntrack is set to auto, and since I currently have no filter/NAT/mangle/raw rules it is off. when it is on there are probably anywhere from 150k to 500k connections. all routes in the routing table have IPs as the gateway (nexthop), with the exception of connected routes. by bridge table do you m...
by Lupin
Fri Jul 29, 2016 8:11 pm
Forum: RouterBOARD hardware
Topic: CRS as PPPoE Server - Low Performance
Replies: 19
Views: 2760

Re: CRS as PPPoE Server - Low Performance

With e.g the CRS125, PPPOE and NAT you should get at least 100Mbps. /interface bridge add name=br-dhcp add name=br-diff /interface ethernet set [ find default-name=ether1 ] l2mtu=1788 mtu=1700 set [ find default-name=ether2 ] l2mtu=1788 mtu=1700 set [ find default-name=ether3 ] l2mtu=1788 mtu=1700 ...
by Lupin
Thu Jul 28, 2016 11:59 pm
Forum: RouterBOARD hardware
Topic: CRS as PPPoE Server - Low Performance
Replies: 19
Views: 2760

Re: CRS as PPPoE Server - Low Performance

What speedtest, exactly?
Not more than 20Mbps (speedtest.net)
by Lupin
Thu Jul 28, 2016 8:09 pm
Forum: RouterBOARD hardware
Topic: CRS as PPPoE Server - Low Performance
Replies: 19
Views: 2760

Re: CRS as PPPoE Server - Low Performance

What do you do with removed switches?
Nothing.. it remain on shelf gathering dust
by Lupin
Mon Jul 25, 2016 10:21 am
Forum: RouterBOARD hardware
Topic: CRS as PPPoE Server - Low Performance
Replies: 19
Views: 2760

Re: CRS as PPPoE Server - Low Performance

The point is not to change the hardware,
(I have about 60 CRS to remove and I'm already doing it) but understand if the slowness is due to some system bug, and if it is, correct it.
I would have a little more time also to buy and change all the hardware (unless then, the problem is not fixed)
by Lupin
Mon Jul 25, 2016 8:31 am
Forum: RouterBOARD hardware
Topic: CRS as PPPoE Server - Low Performance
Replies: 19
Views: 2760

Re: CRS as PPPoE Server - Low Performance

Why RB2011 with same identical CPU has no problem to run PPPoE Server?
There are a ROS problem? Bottleneck?
by Lupin
Thu Jul 21, 2016 11:09 pm
Forum: RouterBOARD hardware
Topic: CRS as PPPoE Server - Low Performance
Replies: 19
Views: 2760

CRS as PPPoE Server - Low Performance

I've installed some CRS125-24G-1S on my BTS that acts like switch/pppoe-server But I've low Speedtest of the client attested on it. When they test their download speed not exceed 20Mbps. If I replace CRS with a RB1100AHx2 then go to 40 or 50Mbps Ok, crs is intended as switch but his cpu go from 20% ...
by Lupin
Mon Jan 11, 2016 11:03 pm
Forum: General
Topic: CCR1072 - Support S-RJ01
Replies: 4
Views: 1250

Re: CCR1072 - Support S-RJ01

6.33.3 do not supports s-rj01
and then, why testing with 6.33.3 work?
CCR recognize the module and data passthrough?

Sure that it is not just an omission of Mikrotik in the changelog?

Mikrotik? some idea?
by Lupin
Mon Jan 11, 2016 8:09 pm
Forum: General
Topic: CCR1072 - Support S-RJ01
Replies: 4
Views: 1250

CCR1072 - Support S-RJ01

In the 6.34rc34 changelog I see this
"added support for S-RJ01 SFP modules"

Is still supported in the 6.33.3 without problem? (I don't see it on changelog)

I've some CCR1072 and I need to say if it is supported in the stable release, because I need to use these in my core network

Regards
by Lupin
Tue Jan 05, 2016 11:34 am
Forum: Wireless Networking
Topic: Strenght signal ( -53/-56) but low TX CCQ and high RX CCQ - NV2
Replies: 13
Views: 5788

Re: Strenght signal ( -53/-56) but low TX CCQ and high RX CCQ - NV2

Dears I have some problem in my wireless link. The signal is strenght, CCQ RX is 98/100% and low CCQ in tx rates ( 37, 44%). I tried anything, change channel, modulation, etc. I need help Thank you on AP and Station: - what antenna do you use ? (gain) - what are Tx Power? (default?) - what rf-cable...
by Lupin
Tue Sep 29, 2015 9:49 pm
Forum: Wireless Networking
Topic: max nv2 clients
Replies: 6
Views: 1633

Re: max nv2 clients

Hi,

when there is too much clients on NV2 sector you have to use larger TDMA Period to achieve good throughput. It of course means that ping time goes higher.
On all my APs increase the tdma period doesn't benefit nothing.
by Lupin
Mon Sep 21, 2015 10:19 pm
Forum: General
Topic: How to say if Queue is in Burst o Not
Replies: 2
Views: 413

Re: How to say if Queue is in Burst o Not

For start can be only a field with
Burst is allowed: yes/no

as wiki says in the example table
http://wiki.mikrotik.com/wiki/Manual:Queues_-_Burst
...
Burst is allowed
Burst is allowed
...
Burst is not allowed
Burst is not allowed
...
by Lupin
Mon Sep 21, 2015 1:08 pm
Forum: General
Topic: How to say if Queue is in Burst o Not
Replies: 2
Views: 413

How to say if Queue is in Burst o Not

There are method to know when the queue is in burst and when it is not?
by Lupin
Sat Sep 19, 2015 6:32 pm
Forum: Wireless Networking
Topic: WI-FI ROAMING 802.11r QUESTION
Replies: 30
Views: 18471

Re: WI-FI ROAMING 802.11r QUESTION

+1 for 802.11r support
by Lupin
Thu Sep 17, 2015 5:46 pm
Forum: Wireless Networking
Topic: What is wrong with nv2?
Replies: 63
Views: 9414

Re: What is wrong with nv2?

I can only say what is fact. Developers are not making changes for fun and games. They do actual work and work very hard. I know what they work on, so I can give you honest answer. have you ever tried the NV2 protocol in a real environment? What results you get? I can't get more than 30Mbps aggrega...
by Lupin
Tue Sep 08, 2015 7:24 pm
Forum: Wireless Networking
Topic: NV2 - News about Improvments?
Replies: 40
Views: 4818

Re: NV2 - News about Improvments?

You mean that (for example) :
if I have an AP with 40Mbps of bandwidth and 40 customers registrated, they will be castrated to 1Mbps because slots are equally distributed, whether they do or not traffic
by Lupin
Tue Sep 08, 2015 6:28 pm
Forum: Wireless Networking
Topic: NV2 - News about Improvments?
Replies: 40
Views: 4818

Re: NV2 - News about Improvments?

What do think occurs on the dual chain AP unused chain (antenna element) when the AP goes into receive mode and is listening to both dual and single chain CPE's? Suddenly there is no signal on one chain when switching from last client, does the radio card use AGC (?) in a attempt to boost signal th...
by Lupin
Tue Sep 08, 2015 8:38 am
Forum: Wireless Networking
Topic: NV2 - News about Improvments?
Replies: 40
Views: 4818

Re: NV2 - News about Improvments?

A single chain cpe eats up to double the airtime compared to a dual chain cpe. If it is a bad performer due to bad conditions it slows down the sector. What I mean is that, just having one or two cpe with problems, to degrade the whole cell. TDMA protocol should give safeties in these cases There i...
by Lupin
Mon Sep 07, 2015 11:20 pm
Forum: Wireless Networking
Topic: NV2 - News about Improvments?
Replies: 40
Views: 4818

Re: NV2 - News about Improvments?

We offer a free upgrade for customers with older cpes to increase sector capacity.
This problem appear also on dual-chain device. So free upgrade not solve the problem
by Lupin
Mon Sep 07, 2015 10:58 pm
Forum: Wireless Networking
Topic: NV2 - News about Improvments?
Replies: 40
Views: 4818

Re: NV2 - News about Improvments?

Your posts are not related with topic title. Please start your own Topic.
I think that my problem are NV2 related ?
draguzet this is a typical problem that I've in NV2 PTMP.
It should not happen, or impact so strongly because of the nature of TDMA, but in Mikrotik anything could happen
by Lupin
Mon Sep 07, 2015 1:18 pm
Forum: Wireless Networking
Topic: NV2 - News about Improvments?
Replies: 40
Views: 4818

Re: NV2 - News about Improvments?

I think Mikrotik is opening to the market of home network.

In the last newsletter (67) we see a photo of new product (sector) but is not mentioned into it
by Lupin
Fri Sep 04, 2015 9:36 pm
Forum: Wireless Networking
Topic: NV2 - News about Improvments?
Replies: 40
Views: 4818

Re: NV2 - News about Improvments?

I agree, Mikrotik not longer consider WISPs market.
In fact, until today, still no answer on this thread by them.

They are focusing on IPSEC :lol:
In the last releases 70% of the time appears ipsec fix
Stop, and fix/complete it for good!!
by Lupin
Thu Sep 03, 2015 6:29 pm
Forum: General
Topic: v6.33rc release candidate (final testing)
Replies: 203
Views: 37212

Re: v6.33rc1 release candidate

What's new in 6.33rc1 (2015-Sep-02 15:45): *) wlan - improve single connection TCP performance for ac chipset with cm2 package; Very good. Does this help with mixed environment .ac AP and .n CPEs ? Can you share some background information what is happening (packet reordering ? ack aggregation effe...
by Lupin
Thu Sep 03, 2015 9:02 am
Forum: Wireless Networking
Topic: NV2 - News about Improvments?
Replies: 40
Views: 4818

Re: NV2 - News about Improvments?

Same experience here. Two APs. No NV2, just straight 802.11n (2.4GHz). 35 - 45 clients each, terrible jitter (5 - 200+ ms) Why you have NV2 disabled? This topic is about NV2. Enable nv2, set TDMA to auto. 35-45clients is too much for AP. Especialy on 2,4Ghz. Move clients to 5Ghz with NV2 Yes, topic...
by Lupin
Tue Sep 01, 2015 9:09 pm
Forum: Announcements
Topic: v6.32 released [version temporarily removed]
Replies: 116
Views: 29962

Re: v6.32 released

*) firewall - fixed limit and dst-limit options. requesting more details on this =) I've open a ticket with support on this problem: http://forum.mikrotik.com/viewtopic.php?f=2&t=99745 also another user has same http://forum.mikrotik.com/viewtopic.php?f=2&t=99877 Support say me that will fix in nex...
by Lupin
Fri Aug 28, 2015 12:22 am
Forum: Wireless Networking
Topic: 28Mhz with 1Gbps...
Replies: 8
Views: 1789

Re: 28Mhz with 1Gbps...

angboontiong Title thread say 28Mhz but after few rows you say 58Mhz I think you mean 58Mhz but this is a strange Measure.. usually there are 56Mhz channel. In my personal experience I've many link in 17/18Ghz that can push real 480Mbps TCP Full Duplex using a single-pol antenna with modulation of 1...
by Lupin
Thu Aug 27, 2015 11:26 pm
Forum: Wireless Networking
Topic: NV2 - News about Improvments?
Replies: 40
Views: 4818

Re: NV2 - News about Improvments?

better than MT. Sorry for that. In our our Case we have tested both. Netmetal an UBNT AC Gear. With a normal Nanobeam M5 we get 150 Mbit throuput over a 2 km link. Ok, 2km, so your test is a PTP. But how can you say me on PTMP ? This is the big problem... In my experience I see - ubnt airmax: 50-60...
by Lupin
Mon Aug 24, 2015 10:27 pm
Forum: Wireless Networking
Topic: NV2 - News about Improvments?
Replies: 40
Views: 4818

Re: NV2 - News about Improvments?

It would be pretty cool, NV3 !! Today's customers are more and more, few frequencies, the spectrum is more dirty, and customer bandwidth trend increase (competitors increases) Urge then, see if Mikrotik wants to develop the radio technology for WISP, or remain, leave give me the comparison, as the D...
by Lupin
Mon Aug 24, 2015 8:46 am
Forum: General
Topic: Drop Telnet failure login
Replies: 1
Views: 912

Re: Drop Telnet failure login

This was tested on RouterOS 6.30
by Lupin
Sat Aug 22, 2015 4:58 pm
Forum: Wireless Networking
Topic: NV2 - News about Improvments?
Replies: 40
Views: 4818

Re: NV2 - News about Improvments?

I hope normis,mrz,uldis, or someone of Mikrotik team answer to give informations on the situation.

And I hope they are good news.

We are constantly growing and limit customers to 20 per AP means losing customers
by Lupin
Sat Aug 22, 2015 3:48 pm
Forum: Wireless Networking
Topic: NV2 - News about Improvments?
Replies: 40
Views: 4818

NV2 - News about Improvments?

Mikrotik, there are any news about improving NV2 protocol? Today we can't have more than 25Mbps aggregate on an 20Mhz AP with 30 stations (5Ghz n/ac) You could implement TDD with a ratio of DL/UL. The most widely used in networks PTMP is 75/25. All combined with a GPS Sync or Internatl Sync dramatic...
by Lupin
Fri Aug 21, 2015 2:47 pm
Forum: General
Topic: Drop Telnet failure login
Replies: 1
Views: 912

Drop Telnet failure login

Why this script doesn't work? /ip firewall filter add action=drop chain=input dst-port=23 protocol=tcp src-address-list=ftp_blacklist add chain=output content="Login failed, incorrect username or password" dst-limit=1/1m,3,dst-address/1m protocol=tcp add action=add-dst-to-address-list address-list=t...
by Lupin
Sat Aug 08, 2015 8:34 pm
Forum: Wireless Networking
Topic: Netmetal and NV2 low throughput
Replies: 20
Views: 4552

Re: Netmetal and NV2 low throughput

And BIG BIG problem on Netmetal (922 and 921) devices are unstable LAN port, which suddenly stop working even all parameters are UP and running, but only solution is to reboot device one or more times. We are waiting Mikrotik to solve this BIG problem for Months :( I confirm this BIG PROBLEM !!! se...
by Lupin
Fri Jul 24, 2015 10:27 am
Forum: General
Topic: Live Stream MUM Switzerland
Replies: 6
Views: 594

Live Stream MUM Switzerland

Does anyone have the link of streaming ?
by Lupin
Wed Jul 22, 2015 10:43 pm
Forum: Wireless Networking
Topic: RBGrooveA-52HPn Point to Multipoint
Replies: 2
Views: 516

Re: RBGrooveA-52HPn Point to Multipoint

What is the wireless-mode of the AP.
You must set to AP-Bridge.
Your behaviour seems to be a "Bridge" mode
by Lupin
Tue Jul 21, 2015 11:54 pm
Forum: Wireless Networking
Topic: Low NV2 802.11ac PTMP Thoughput
Replies: 47
Views: 10948

Re: Low NV2 802.11ac PTMP Thoughput

I'm already considering another supplier. I think that Mikrotik never improve its system for wisp I begin to have many customers and situations of degradation are more and more. Are ONLY two years in which I hope some improvements: (http://forum.mikrotik.com/viewtopic.php?t=76376) Sep 04, 2013 I wil...
by Lupin
Fri Jul 17, 2015 9:46 pm
Forum: Wireless Networking
Topic: Low NV2 802.11ac PTMP Thoughput
Replies: 47
Views: 10948

Re: Low NV2 802.11ac PTMP Thoughput

If 40 customers share 60-70Mbps overall bandwidth then OK, it's saturation. But, if 40 customers are not making traffic and, just for the fact of being associated with the AP, degrade the performance of all, mean that there is a problem to resolve, especially if a station reach max of 8-10Mbps when ...
by Lupin
Fri Jul 17, 2015 6:29 pm
Forum: Wireless Networking
Topic: Low NV2 802.11ac PTMP Thoughput
Replies: 47
Views: 10948

Re: Low NV2 802.11ac PTMP Thoughput

The basic problem is that when you connect many customers on a cell the bandwidth decreases drastically. I have the same problem, about 45 clients connected with optimal signals, but I can not pass over in 6-7Mbps TCP in download (test on the customer with best signal) The access poin at that time a...
by Lupin
Sat Jul 11, 2015 12:23 am
Forum: RouterBOARD hardware
Topic: QRT Very Low Throughput
Replies: 4
Views: 754

Re: QRT Very Low Throughput

try this setting on both device (before change to nstreame or 802.11)
/interface wireless security-profiles
set default authentication-types=wpa2-psk mode=dynamic-keys wpa2-pre-shared-key=yourPassword
after try to switch on nstreme or 802.11
by Lupin
Wed Jul 08, 2015 11:35 pm
Forum: Announcements
Topic: 6.30 released
Replies: 180
Views: 42367

Re: 6.30 released

How to use execute? (mAP) [admin@MikroTik] > :execute script={interface print} file=test.txt [admin@MikroTik] > No error in sintax [admin@MikroTik] > file print # NAME TYPE SIZE CREATION-TIME 0 flash disk jan/01/1970 00:00:00 1 pub directory jul/08/2015 20:13:55 2 flash/skins directory jan/01/1970 0...
by Lupin
Mon Jul 06, 2015 9:34 pm
Forum: General
Topic: 6.30 RC final fixes before release
Replies: 96
Views: 22741

Re: 6.30 RC final fixes before release

"wireless - improve ac radio coexistence with other wireless clients" - what does it mean exactly? What exactly did you improve? Improve performance or latency when both N and AC clients are connected? It also improves with Nstreme and NV2 protocol? How much? Normis any info about this changelog??
by Lupin
Fri Jul 03, 2015 8:40 am
Forum: Wireless Networking
Topic: NetMetal5 Preformance (?)
Replies: 9
Views: 1387

Re: NetMetal5 Preformance (?)

With AC-Radios work only with "all rates fixed" but your main problem is alignment

If your link is with perfect line of sight (and free fresnel zone) then they are just bad aligned

Make correct alignment and see (using the default tx power) what you get
by Lupin
Fri Jul 03, 2015 1:08 am
Forum: Wireless Networking
Topic: Multicast in point to multipoint
Replies: 1
Views: 558

Re: Multicast in point to multipoint

Yes,
remove all wds configuration and use the mode=station-bridge on all clients
by Lupin
Fri Jul 03, 2015 1:06 am
Forum: Wireless Networking
Topic: My Iphone can't get a TX rate better 65Mbps on hAP routers.
Replies: 26
Views: 4133

Re: My Iphone can't get a TX rate better 65Mbps on hAP routers.

try to setup a 20/40Mhz channel, set the rts/cts, distance to indoor, enable the Wireless-fp package.
Update to 6.28 with last firmware

and check again
by Lupin
Fri Jul 03, 2015 1:01 am
Forum: Wireless Networking
Topic: small proplem
Replies: 1
Views: 327

Re: small proplem

you can user userman to setup an account and limit per 30minutes per day
by Lupin
Fri Jul 03, 2015 1:00 am
Forum: Wireless Networking
Topic: Recommendation for WISP ac Basestation
Replies: 2
Views: 876

Re: Recommendation for WISP ac Basestation

Yes this works fine but remember:

ubnt Sector has electrical downtilt
sxt work to max 3-4km distance
you need perfect LOS for all users
how bandwith-rate you want to offer to clients?
you must use nv2
by Lupin
Fri Jul 03, 2015 12:51 am
Forum: Wireless Networking
Topic: CAPSMAN Access List doesn't work
Replies: 1
Views: 769

Re: CAPSMAN Access List doesn't work

In the last two rows remove the
mac-address=00:00:00:00:00:00

and try it
by Lupin
Fri Jul 03, 2015 12:47 am
Forum: Wireless Networking
Topic: 802.11n force 40mhz channel
Replies: 5
Views: 3535

Re: 802.11n force 40mhz channel

You can try creating Channels manually
Wireless > Channels
by Lupin
Fri Jul 03, 2015 12:38 am
Forum: Wireless Networking
Topic: NetMetal5 Preformance (?)
Replies: 9
Views: 1387

Re: NetMetal5 Preformance (?)

If you have default tx power then you need to better align antenna

On 10km your signal should have at least -40 or better
by Lupin
Wed Jul 01, 2015 11:40 pm
Forum: General
Topic: 6.30 RC final fixes before release
Replies: 96
Views: 22741

Re: 6.30 RC final fixes before release

"wireless - improve ac radio coexistence with other wireless clients" - what does it mean exactly?
What exactly did you improve?
Improve performance or latency when both N and AC clients are connected?

It also improves with Nstreme and NV2 protocol?

How much?
by Lupin
Mon May 25, 2015 10:08 am
Forum: General
Topic: v6.29 will be released this week!
Replies: 65
Views: 13407

Re: v6.29 will be released this week!

Any improvments or Bug-Fix on Wireless section?

For example:
- Tx-Power not shown in 802.11ac
- Scan to a File: save on the file the results obtained with timed scan instruments like "Scan", "Freq.Usage", "Snooper", "Spectral Scan", "Spectral History"
by Lupin
Sat May 09, 2015 10:11 pm
Forum: Wireless Networking
Topic: Low NV2 802.11ac PTMP Thoughput
Replies: 47
Views: 10948

Re: Low NV2 802.11ac PTMP Thoughput

You should try to make BWTest TCP client with the best signal. In meantime you manual disconnect other users until you find the one (or ones) that degrade performance. With Mikrotik often I found that clients, because obstacles, degrade the entire cell (even if the signal is good). They should work ...
by Lupin
Fri Apr 24, 2015 11:15 am
Forum: Wireless Networking
Topic: Force 40 MHz channel on RB921UAGS-5SHPacD
Replies: 8
Views: 1462

Re: Force 40 MHz channel on RB921UAGS-5SHPacD

You could check the log yourself, is easier. Check since 6.24 untill 6.28. Not just the last one...
Yes, and there're no improvments on wireless
by Lupin
Thu Apr 23, 2015 9:24 pm
Forum: Wireless Networking
Topic: Force 40 MHz channel on RB921UAGS-5SHPacD
Replies: 8
Views: 1462

Re: Force 40 MHz channel on RB921UAGS-5SHPacD

please upgrade to latest RouterOS version we have some improvements, isnt is working on 40mhz ?

what speed you are getting. ?
Wireless Improvments on 6.28 ?

Any details??
by Lupin
Mon Feb 09, 2015 6:10 pm
Forum: Wireless Networking
Topic: GPS sync and 802.11ac
Replies: 5
Views: 1296

Re: GPS sync and 802.11ac

RouterOS doesn't support any kind of GPS sync for wireless
Have you thought about implementing it? :shock:
by Lupin
Thu Jan 29, 2015 8:56 am
Forum: Wireless Networking
Topic: SXT AC bandwidth
Replies: 21
Views: 8035

Re: SXT AC bandwidth

ok Guys so in this example: eCee with 5400 means;
"C" is a central frequency?
So 5400 means range 5390-5410
and then
5400 eCee spectrum range should be
5370-5450
by Lupin
Wed Jan 07, 2015 9:01 am
Forum: Wireless Networking
Topic: Wifi AP
Replies: 4
Views: 848

Re: Wifi AP

Your laptop chipset is only 2.4Ghz
http://www.broadcom.com/products/Wirele ... ns/BCM4313

Omnitik radio operare only in 5Ghz band
by Lupin
Fri Dec 19, 2014 8:10 am
Forum: Wireless Networking
Topic: PTMP Bad Throughput
Replies: 16
Views: 3197

Re: PTMP Bad Throughput

Hi sonny, I set all stations and ap with band=5ghz-onlyn
on ap I set tdma-period-size=3
and lower HT (see screenshot)

But result is same 9-10Mbps TCP send to the station
onlyN_onlyLowHT.png
10Mhz is not a solution because I need to deliver to all customers greater bandwidth possible
by Lupin
Wed Dec 17, 2014 12:40 am
Forum: Wireless Networking
Topic: PTMP Bad Throughput
Replies: 16
Views: 3197

Re: PTMP Bad Throughput

If you enable the regular wireless package on the AP do you still see the low throughput? I enable the REGULAR WIRELESS package, but after a restart wireless interface disappear (also after others reboot) I had to enable the wireless-fp package and restart I tried again but before restarting I disa...
by Lupin
Tue Dec 16, 2014 11:55 pm
Forum: Wireless Networking
Topic: PTMP Bad Throughput
Replies: 16
Views: 3197

Re: PTMP Bad Throughput

Now see the test on the D2:F1 station alone on the same AP (I only disconnected all other stations)
onlyOneTestStation.png
With all the other stations (even if the total traffic is less than 2megabit) it seems that the thoughput collapse.
Uldis I need a solution to this behaviuor
by Lupin
Tue Dec 16, 2014 11:34 pm
Forum: Wireless Networking
Topic: PTMP Bad Throughput
Replies: 16
Views: 3197

Re: PTMP Bad Throughput

This with tdma auto
fp-tdma-auto.png
by Lupin
Tue Dec 16, 2014 11:32 pm
Forum: Wireless Networking
Topic: PTMP Bad Throughput
Replies: 16
Views: 3197

Re: PTMP Bad Throughput

Here is a screenshot from some of our installations testing 6.23 TDMA 3 Wireless FP With 6.23 RX/TX was 1db better as in 6.19 maybe TCP throughput is a bit worse. But ping is o.k. B-test TCP 1 stream to a client 5 km away (CCR -> AP-RB912 -.-.-.-.- STA-RB911 -> CCR) normal traffic arround 20MBit/s ...
by Lupin
Tue Dec 16, 2014 11:15 pm
Forum: Wireless Networking
Topic: PTMP Bad Throughput
Replies: 16
Views: 3197

Re: PTMP Bad Throughput

If you enable the regular wireless package on the AP do you still see the low throughput?
I enable the REGULAR WIRELESS package, but after a restart wireless interface disappear (also after others reboot)

I had to enable the wireless-fp package and restart
by Lupin
Mon Dec 15, 2014 9:31 pm
Forum: Announcements
Topic: 6.23 released!
Replies: 143
Views: 53871

Re: 6.23 released!

Is anybody else noticing a drop in TCP throuput in ptmp nv2+fp especially in noisy enviroment. I have what appears perfect client connection 98% Ccr TX/Rx 54/54 max throuput 4 - 6 megs 5.26 gives 18-20megs same client. Yes, now I'm testing a cell with many clients with RouterOS 6.22+fp. Good CCQ bu...
by Lupin
Mon Dec 15, 2014 9:26 pm
Forum: Wireless Networking
Topic: PTMP Bad Throughput
Replies: 16
Views: 3197

Re: PTMP Bad Throughput

96% CCQ and bad TCP Throughput... why ?

I can't reduce tx-power because:
1 - longest client has no benefit
2 - with a -70 connection is very bad

But I ask why I see HIGH CCQ and bad performance.
Something wrong in the CCQ ??
by Lupin
Wed Dec 10, 2014 12:25 pm
Forum: Wireless Networking
Topic: PTMP Bad Throughput
Replies: 16
Views: 3197

Re: PTMP Bad Throughput

Test UDP
udp_test.png
Test TCP between two CCR
tcp_test.png
Signal
statusWireless.png
by Lupin
Wed Dec 10, 2014 1:10 am
Forum: Wireless Networking
Topic: PTMP Bad Throughput
Replies: 16
Views: 3197

PTMP Bad Throughput

I've a Metal with 38 clients connected NV2 with RouterOS 6.22 (Wireless-fp enabled) All clients are RouterOS>= 6.15 with Wireless-fp I upgrade a client to (Groove 5Hn) RouterOS 6.22 without success When I start a BWTest UDP I see 20-22Mbps but REAL TCP (speedtest or TCP BWTest 4 sessions) see 6-7Mbp...
by Lupin
Thu Dec 04, 2014 10:13 pm
Forum: RouterBOARD hardware
Topic: QRT5 Ac version?
Replies: 15
Views: 3850

Re: QRT5 Ac version?

Mikrotik, only a very little change to make the QRT-AC (maybe even Sextant-AC ?!?)

I need it!

Are you already thinking when releasing them ? :D
by Lupin
Tue Nov 18, 2014 11:14 am
Forum: Wireless Networking
Topic: how to find if a station is slowing down the AP
Replies: 4
Views: 1214

Re: how to find if a station is slowing down the AP

The TX/RX CCQ is the value you are looking for, just sort and see the worst CCQ - that client is most probably slowing down your AP. Not always ccq show bad stations. I've some stations with 50% of ccq and good modulation bad very bad throughput. I also remember that CCQ is completely unreliable wh...
by Lupin
Tue Nov 18, 2014 12:43 am
Forum: Wireless Networking
Topic: PTMP - Find bad stations (advice)
Replies: 0
Views: 624

PTMP - Find bad stations (advice)

Unfortunately, more and more often happen to have stations connected to a cell that break down overall usage. Would need a way to quickly find the bad stations. It would be very useful, for example, to see the number of frames re-transmitted (in number o percentage) to figure out if it's good or bad...
by Lupin
Mon Nov 17, 2014 8:51 am
Forum: Wireless Networking
Topic: 52km NetMetal-AC Link
Replies: 13
Views: 16400

Re: 52km NetMetal-AC Link

Found the best frequency
TDMA Period Size:2ms
Channel Width: 20/40Mhz Ce (with 80MHz is worse)
Wireless Protocol: NV2 (with security)
RouterOS: 6.21.1

Results UDP
download.jpg
upload.jpg
Ping
ping.jpg
by Lupin
Mon Nov 17, 2014 12:51 am
Forum: Wireless Networking
Topic: how to find if a station is slowing down the AP
Replies: 4
Views: 1214

Re: how to find if a station is slowing down the AP

My method: Find the best station according to the one with best signal-strength In registration-table select all records and press "reset" Now order by "Tx/Rx Bytes" descending From AP start a TCP BWTest in send mode (TCP Connection count=4) to the best station Wait a moment (your client go in the f...
by Lupin
Sat Nov 15, 2014 1:40 pm
Forum: Wireless Networking
Topic: 52km NetMetal-AC Link
Replies: 13
Views: 16400

Re: 52km NetMetal-AC Link

Changing to
Frequency 5480, 40Mhz, Ce
rx_40Mhz_tdma2.jpg
tx_40Mhz_tdma2.jpg
by Lupin
Sat Nov 15, 2014 1:34 pm
Forum: Wireless Networking
Topic: 52km NetMetal-AC Link
Replies: 13
Views: 16400

Re: 52km NetMetal-AC Link

Setting tdma to 2ms as suggested, link go up
So, BWtest show me bad results.

Frequency 5460, 40Mhz, Ce
rx_40Mhz_tdma2.jpg
tx_40Mhz_tdma2.jpg
by Lupin
Fri Nov 14, 2014 9:44 am
Forum: Wireless Networking
Topic: 52km NetMetal-AC Link
Replies: 13
Views: 16400

Re: 52km NetMetal-AC Link

Some details of your configuration?
You use NV2?
tdma period size
cell radius?
channel width?
Only AC?
by Lupin
Fri Nov 14, 2014 8:07 am
Forum: Wireless Networking
Topic: 52km NetMetal-AC Link
Replies: 13
Views: 16400

Re: 52km NetMetal-AC Link

ACCESS POINT /interface bridge add name=br-diff /interface wireless set [ find default-name=wlan1 ] antenna-gain=34 band=5ghz-onlyac channel-width=20/40mhz-Ce country=italy default-authentication=no disabled=no frequency=5460 frequency-mode=superchannel l2mtu=\ 1600 mode=ap-bridge nv2-cell-radius=80...
by Lupin
Fri Nov 14, 2014 7:27 am
Forum: Wireless Networking
Topic: 52km NetMetal-AC Link
Replies: 13
Views: 16400

52km NetMetal-AC Link

We try to create a 52km link with NetMetal (RouterOS: 6.21.1) Setting channel width 20/40Ce protocol: nv2 (with security) Wireless Mode: onlyAC We using a dual pol 34dB antennas Signal is -51/-51 But link can't be established Log says: 15:50:05 wireless,info 4C:5E:0C:7C:XX:XX@wlan1: failed to connec...
by Lupin
Wed Nov 12, 2014 12:24 pm
Forum: RouterBOARD hardware
Topic: QRT5 Ac version?
Replies: 15
Views: 3850

Re: QRT5 Ac version?

So, when you release new QRT5-AC ??
by Lupin
Sat Oct 25, 2014 7:19 pm
Forum: Wireless Networking
Topic: lost wireless port netmetal 5
Replies: 8
Views: 2082

Re: lost wireless port netmetal 5

What's new in 6.21rc22 (2014-Oct-24 10:29):

*) wireless - fixed scanning tool crash for 802.11ac interfaces
*) wireless - fixed Nv2 kernel panic on 802.11ac interfaces
...
by Lupin
Mon Oct 20, 2014 8:48 pm
Forum: Wireless Networking
Topic: lost wireless port netmetal 5
Replies: 8
Views: 2082

Re: lost wireless port netmetal 5

Yes, there are many bugs.

For example on my netmetal (6.19) when I start a wireless snooper device crash

They need some fixes
by Lupin
Mon Sep 08, 2014 6:21 pm
Forum: RouterBOARD hardware
Topic: QRT-5 AC
Replies: 1
Views: 1053

Re: QRT-5 AC

I have not yet tried it, but I hope that Mikrotik will start the production of these models:
- QRT-5 AC
- SEXTANT AC
by Lupin
Mon Sep 08, 2014 6:15 pm
Forum: RouterBOARD hardware
Topic: MiniPciExpress to MiniPci for Radio AC
Replies: 5
Views: 1162

Re: MiniPciExpress to MiniPci for Radio AC

In my case it would be fine !! :D
I always use a single radio per Routerboard

So if you are going to produce an adapter keep me informed !!

I'd hate to trashing all these RouterBOARDs to connect new customers in AC protocol
by Lupin
Mon Sep 08, 2014 3:08 pm
Forum: RouterBOARD hardware
Topic: MiniPciExpress to MiniPci for Radio AC
Replies: 5
Views: 1162

Re: MiniPciExpress to MiniPci for Radio AC

You mean that the 433AH and 433GL are not sufficiently powerful to handle the AC protocol?
by Lupin
Mon Sep 08, 2014 12:02 pm
Forum: RouterBOARD hardware
Topic: MiniPciExpress to MiniPci for Radio AC
Replies: 5
Views: 1162

MiniPciExpress to MiniPci for Radio AC

We are a WISP and we bought a lot of RB-433AH and RB-433GL (during the time) that serve as access points throughout the network. It would be interesting to change the protocol to AC but unfortunately the radio-slot is MiniPiciExpress while the 433AH has the normal MiniPCI slot I am aware that the mi...
by Lupin
Wed Aug 20, 2014 10:51 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

Software
6 - 802.11ac Protocol is ready to use

Hardware
1 - NetMetal is coming out

Come on Mikrotik!!
You're great! Good Job

see other points
http://forum.mikrotik.com/viewtopic.php ... 40#p384640
by Lupin
Sat Aug 16, 2014 1:48 pm
Forum: Wireless Networking
Topic: Dual Polarization - Combination CH0/CH1 Vertical/Horizontal
Replies: 1
Views: 3550

Dual Polarization - Combination CH0/CH1 Vertical/Horizontal

Why Mikrotik choose different polarities for different types of antenna? For example, in the SXT and SEXTANT: CH0 Horizontal CH1 Vertical see manual http://i.mt.lv/routerboard/files/SXTug.pdf at page 5 says to disable Tx Chain0 for use in Vertical pol while for the BaseBox + Dish CH0 Vertical CH1 Ho...
by Lupin
Thu Jul 10, 2014 12:28 am
Forum: General
Topic: NV2 improvement question
Replies: 2
Views: 1498

Re: NV2 improvement question

This is a fantastic idea!!
by Lupin
Thu Jul 10, 2014 12:10 am
Forum: General
Topic: v6.16 RC test release now includes 802.11ac support
Replies: 52
Views: 20433

Re: v6.16 RC test release now includes 802.11ac support

Tested on RB912G-2HnD and 802.11ac QCA9880 mini-pcie card. Seems works well - 702 mbps udp between 2 of these.

Stable on bandwith test 1 hour.

Good job.
Can you share other informations?
Like: distance, signal, channel, modulation (256 qam??), ping, protocol..nv2 ?!!?
and some screenshots?
by Lupin
Fri Jul 04, 2014 12:54 am
Forum: General
Topic: v6.15 released
Replies: 302
Views: 103299

Re: v6.15 released

Preferisco attendere l'inglobamento del package, conoscendo Mikrotik ho il timore che quando aggiornerai da una versione con il package aggiuntivo ad una più recente senza package si impianterà tutto :D

Zona Nord-est

Ciao
by Lupin
Thu Jul 03, 2014 10:37 pm
Forum: General
Topic: v6.15 released
Replies: 302
Views: 103299

Re: v6.15 released

The "wireless-fp" package seems stable.
When will you default include it as primary, in the standard update package?

I want to upgrade all my network without enable every station manually
by Lupin
Tue Jun 10, 2014 10:01 pm
Forum: General
Topic: v6.14 released
Replies: 115
Views: 24576

Re: v6.14 released

Hi rextended!

Hai un contatto skype che vorrei chiederti un po di robette da wisp?

Ciao
by Lupin
Tue May 13, 2014 11:56 pm
Forum: RouterBOARD hardware
Topic: QRT-5
Replies: 23
Views: 8887

Re: QRT-5

Why this difference between QRT 2Ghz and 5Ghz?
Price examples of other product in 2Ghz and 5Ghz version:

Metal 2SHPn 99$
Metal 5SHPn 99$

BaseBox2 89$
BaseBox5 89$

QRT-2 149$
QRT-5 169$
by Lupin
Fri May 09, 2014 1:58 am
Forum: General
Topic: what solution can solve this scenario?
Replies: 4
Views: 646

Re: what solution can solve this scenario?

On SXT1 add default route

/ip route add gateway=192.168.1.1
by Lupin
Tue Apr 29, 2014 12:14 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

After a while some changes have been made: Software 1 - Spectral Scan allow to save a file on the RB but they are working for a viewer to see this proprietary file http://forum.mikrotik.com/viewtopic.php?p=423336#p423336 13 - Wireless Controller feature allows to centralize wireless network manageme...
by Lupin
Mon Apr 28, 2014 1:20 pm
Forum: Wireless Networking
Topic: spectral-scan saved file format?
Replies: 19
Views: 3826

Re: spectral-scan saved file format?

I did the same question almost exactly 2 years ago... no news after all this time :(

See here:
http://forum.mikrotik.com/viewtopic.php?f=7&t=61388
by Lupin
Sat Mar 22, 2014 2:42 pm
Forum: RouterBOARD hardware
Topic: QRT 5Ghz When?
Replies: 1
Views: 673

QRT 5Ghz When?

When will be available the QRT 5Ghz?
is already in the production phase?

Is possible to have a license 3 (CPE) to bring down the price?
by Lupin
Fri Mar 21, 2014 1:25 pm
Forum: General
Topic: v6.11 released
Replies: 260
Views: 79928

Re: v6.11 released

This is a beta package, so use only in controlled test networks. The package will replace your default Wireless package upon installation, which means it will also add wireless functionality changes and improvements, not only CAPsMAN. What are the improvements? Improved also NV2 protocol? We tried ...
by Lupin
Fri Mar 21, 2014 11:39 am
Forum: General
Topic: v6.11 released
Replies: 260
Views: 79928

Re: v6.11 released

This is a beta package, so use only in controlled test networks. The package will replace your default Wireless package upon installation, which means it will also add wireless functionality changes and improvements, not only CAPsMAN.
What are the improvements?
Improved also NV2 protocol?
by Lupin
Mon Mar 10, 2014 8:36 am
Forum: Wireless Networking
Topic: Slowdown over the network
Replies: 3
Views: 851

Re: Slowdown over the network

I tried to set the "/queue interface" to "multi-queue-ethernet-default" on all 1100AHx2 but nothing happen.
Does anyone have any idea?
by Lupin
Fri Mar 07, 2014 3:35 pm
Forum: Wireless Networking
Topic: Slowdown over the network
Replies: 3
Views: 851

Re: Slowdown over the network

Ccustomer with his pc see performance that I see using BWTest in TCP mode (15Mbps) CPE is a RB911G-5HPnD and during the test cpu usage is about 20-25% On the 1100AHx2 is about 50% (ok ..one core at 100%) but why on BTS3 is the half of previous BTS, if the routerboard model is always the same? And al...
by Lupin
Fri Mar 07, 2014 1:47 pm
Forum: Wireless Networking
Topic: Slowdown over the network
Replies: 3
Views: 851

Slowdown over the network

I noticed some strange slowdowns on my Mikrotik network The customer reports me that it doesn't download more than 15Mbps So 'I tried to do some tests using the TCP BWTest and I noticed the slowdowns The CPE has a signal on the sector -58/-58 (NV2 protocol dual polarity) All 1100AHx2 handle only the...
by Lupin
Sat Mar 01, 2014 9:18 pm
Forum: Scripting
Topic: Remote Scan?
Replies: 18
Views: 13570

Re: Remote Scan?

I've start a topic with a list of suggestions for wireless improvements
http://forum.mikrotik.com/viewtopic.php?f=7&t=76376

My first point is "Scan to a File" but Mikrotik seem not hear !!!!
They should assume some Radio engineers and some developers dedicated to Wireless!!!!!
by Lupin
Mon Feb 17, 2014 7:24 pm
Forum: Scripting
Topic: API create-and-activate-profile Problem in ROS 6.X
Replies: 2
Views: 2236

Re: API create-and-activate-profile Problem in ROS 6.X

thank you very much boen_robot!! :D

I was waiting this response from Mikrotik support that continued to take time :(
by Lupin
Mon Feb 17, 2014 4:01 pm
Forum: Scripting
Topic: API create-and-activate-profile Problem in ROS 6.X
Replies: 2
Views: 2236

API create-and-activate-profile Problem in ROS 6.X

I've problem in RouterOS 6.x (tried with 6.4 and 6.7) when I send the API (VB.NET or C#) mikrotik.Send("/tool/user-manager/user/create-and-activate-profile") mikrotik.Send(user) mikrotik.Send("=customer=admin") mikrotik.Send("=profile=Standard", True) give me the "!done" result but in userman there ...
by Lupin
Thu Feb 13, 2014 9:13 am
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

Dear Mikrotik, another 5 months have passed... :(
Have you start to develop some of the many changes required?

I don't know others, but wireless market of Wisp is ever expanding and increasingly, better tools are needed in order to compete against "enemies".

Please give me good news
by Lupin
Tue Feb 11, 2014 10:04 am
Forum: Wireless Networking
Topic: NV2 Bad client degrades the overall performance
Replies: 5
Views: 2430

Re: NV2 Bad client degrades the overall performance

ok, but with the tdma protocol we could give a determinate amount of time/utilization to prevent this behaviour.
if only there was an option to set it :(
by Lupin
Tue Feb 11, 2014 9:07 am
Forum: Wireless Networking
Topic: NV2 Bad client degrades the overall performance
Replies: 5
Views: 2430

NV2 Bad client degrades the overall performance

I have a sector (RBMetal +Panel 23 db) with 16 clients connected on my BTS. One of the customers connected with a -73/-69 dBm to 8km (groove52HPn + 29dB grid) has a download bandwidth of about 3-5Mbps (BWTest UDP). Another customer connected with a -53/-52 dBm get to about 30-32Mbps (BWTest UDP) Whe...
by Lupin
Fri Jan 24, 2014 9:11 am
Forum: General
Topic: What's new in 6.8rc1
Replies: 106
Views: 22979

Re: What's new in 6.8rc1

*) wireless - improved 11n and nv2 stability; Normis :shock: !!! Fantastic news! You are working/improving NV2 protocol and wireless section!!!!!!!!! Can you give us some more details of this change? Improve throughput / latency? It solves some stalemate? Can we try it? If so, where is the download...
by Lupin
Tue Nov 26, 2013 10:04 pm
Forum: Wireless Networking
Topic: suddenly unstable nv2 link?
Replies: 20
Views: 2979

Re: suddenly unstable nv2 link?

2-3km with a 29dB antenna? and you have only -62/-62 ?
Is too low. there are bad pointings or obstacles

I expect at least -45dB
by Lupin
Fri Nov 22, 2013 11:39 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

Who is??
This is a MT Forum so I dont link to the competition.
ok... I found it :)
by Lupin
Fri Nov 22, 2013 11:21 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

100-Employees.png Can you put at least 2 of these 100 employees in the wireless industry? Dedicated only to the development and improvement of wireless capabilities We would love to, but such people are really rare :) take a couple of engineers Motorola Who is, in mikrotik, the person that has deve...
by Lupin
Fri Nov 22, 2013 11:10 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

Who is??
by Lupin
Wed Nov 13, 2013 10:13 am
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

100-Employees.png
Can you put at least 2 of these 100 employees in the wireless industry?
Dedicated only to the development and improvement of wireless capabilities
by Lupin
Sun Nov 10, 2013 12:58 am
Forum: Wireless Networking
Topic: Important! connect-list isn't working!!!!!!!!!!!!!
Replies: 1
Views: 729

Re: Important! connect-list isn't working!!!!!!!!!!!!!

Strange behaviour!!

With your configuration the station must connect only to an AP with
mac-address=54:78:1A:64:31:71 AND ssid=concoursep AND security=yourWpa

If the station connects to others APs then, other AP has at least a mac cloned
by Lupin
Thu Oct 31, 2013 9:12 am
Forum: Wireless Networking
Topic: Cannot use Mikrotik Omnitik U-5HnD as the Access Point
Replies: 8
Views: 2277

Re: Cannot use Mikrotik Omnitik U-5HnD as the Access Point

Sure that your device (notebook/ipad...or whatelse) can connect in band of 5Ghz?

Or are only 2Ghz?
by Lupin
Wed Oct 30, 2013 9:25 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

I forgot to add the functionality of the Wireless Controller Wireless Controller feature allows to centralize wireless network management and data processing Mikrotik has already drafted the technical specifications http://wiki.mikrotik.com/wiki/Manual:Wireless_Controller I add it to the list 8)
by Lupin
Mon Oct 21, 2013 9:24 am
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

should be add
link load and nv2/nstreme capacity info in %
You mean, to see the real capacity of the wireless link and the percentage of its use?

For example:
Link Rx/Tx Max Capacity: 98Mbps/33Mbps
Link Rx/Tx Actual Load: 49Mbps/11Mbps
Link Rx/Tx Actual Load %: 50%/33%
by Lupin
Sat Oct 12, 2013 12:57 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

Advanced Scanning : Scans all visible proprietary APs and for each (respecting SSID, security settings, connect lists, etc.) connects and keeps track of the SNR, Rx/Tx signal strength, radioName, mac-address and distance. In a normal scan the TX Signal Strenght and distance is not visible and the r...
by Lupin
Sun Oct 06, 2013 11:40 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

things you can do already: 1) adjust scan list - enter frequencies only intended for the site, like 2 - 4 channels - super-fast reconnect even on 5GHz band 2) adjust access list rules on AP, there you can set minimal and maximal signal strength that is allowed to connect. On client RouterOS you can...
by Lupin
Sun Sep 29, 2013 1:55 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

Mikrotik should add auto shutdown option like if u use battery when voltage rich 22v/11v should trigger shutdown mode or standby mode if its possible - or can be implemented in UP models - on low battery should shutdown other equipment attached to device (exp. RB750UP) - should add also Health grap...
by Lupin
Wed Sep 25, 2013 11:07 pm
Forum: Wireless Networking
Topic: NV2 Latency and throughput issue after updrade
Replies: 11
Views: 3748

Re: NV2 Latency and throughput issue after updrade

One day I really want to see in change log :Improved NV2,Nstreme performance and stability - cos Mikrotik is all about it I agree. We need to evolve wireless performance 8) Lakis, give your opinion here please: http://forum.mikrotik.com/viewtopic.php?f=7&t=76376 ...hoping that Mikrotik consider our...
by Lupin
Wed Sep 25, 2013 9:23 am
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

It allows cpes to send at the same frequency at the same time. So it increases capacity. it looks the same thing of GPS Sync :( I have to take a look at some explanation of this technology I have no 450. But heard this is possible when all cpes have good enough signal for highest modulation. I gues...
by Lupin
Tue Sep 24, 2013 11:16 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

Maybe also frequency usage scan to file :)
On my point one.. there are already these requests
by Lupin
Tue Sep 24, 2013 11:14 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

Would like to see option to configure a single wireless interface in CPE configuration to act simultaneously as both an access point for one SSID and as a station on another SSID. Useful where wired uplink is not available (thus station connection), and wireless often not Mikrotik components. Thank...
by Lupin
Tue Sep 24, 2013 11:11 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

Filtering Channel selectivity or reduction of adj sent channel interference. Most cards have poor filtering, improving this will make the cards perform bettering in environments with with high adjacent channel signal strength. The net effect is a reduction in S/N. Adding an external cavity filter w...
by Lupin
Tue Sep 24, 2013 11:04 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

My list is nearly the same ;-)) I would also like to see some sort of priorization in nv2. I would like to slow down cpes which have bad signal to save airtime for good installed cpes. Good feature!! I add it to the list I've a script for this but changing the power/antenna gain cause a reconnect. ...
by Lupin
Fri Sep 20, 2013 9:18 am
Forum: General
Topic: MUM Live video from St. Louis starting now!
Replies: 52
Views: 17820

Re: MUM Live video from St. Louis starting now!

Normis, "QRT G" is a dual pool antenna?

It would be perfect in a "23dB" "5Ghz" version. Is that possible?
by Lupin
Sat Sep 14, 2013 10:43 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

I update the first post with some of your suggestions 8)

If I have not understood well, correct me
by Lupin
Fri Sep 13, 2013 10:38 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

You mean an attenuator on the 5Ghz frequency (the ones where you work normally) or attenuation larger or smaller 5Ghz frequency (or the specified range)

I believe that an attenuator lowers the input power and also output when used on the range of operating frequencies... you give an example
by Lupin
Thu Sep 12, 2013 10:39 pm
Forum: General
Topic: v6.4 released
Replies: 170
Views: 60930

Re: v6.4 released

Have you plans for the next version some NV2 improvements?
Hi honzam if you want wireless improvements from Mikrotik please add your opinion, or your interest in this topic

http://forum.mikrotik.com/viewtopic.php?f=7&t=76376

8)
by Lupin
Tue Sep 10, 2013 12:35 am
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

I am happy that someone posts his ideas. thanks ejansson. :D We try to understand your points: 1) Have client/remote start scanning on last used frequency or simply in the the frequency setting in the client/remote as a starting point. This would speed up reconnects a lot particularly with 5ghz wher...
by Lupin
Sat Sep 07, 2013 6:52 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

All good ideas.

I haven't tried it yet, but I was thinking about using WDS to sync as a work around.
Exactly, what you mean by wds sync?
by Lupin
Sat Sep 07, 2013 1:27 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

Re: As we would like to evolve the wireless

If you have other ideas or improvements to report, write!! that I keep updated the list above
8)
by Lupin
Wed Sep 04, 2013 12:23 pm
Forum: Wireless Networking
Topic: As we would like to evolve the wireless
Replies: 57
Views: 16287

As we would like to evolve the wireless

Requests that we would like to be implemented in RouterOS (software and hardware) ONLY for Wireless section SOFTWARE : 1 - Scan to a File : save on the file the results obtained with timed scan instruments like "Scan", "Freq.Usage", "Snooper", "Spectral Scan", "Spectral History" (disconnecting itsel...
by Lupin
Wed Jun 12, 2013 9:09 am
Forum: Wireless Networking
Topic: Nv2 Link increases vpn latency
Replies: 4
Views: 1235

Re: Nv2 Link increases vpn latency

In my example above we can see that the only ICMP is unable to obtain a good portion of time. With 200Kbps bandwidth in transit latencies become a third Other vendors do not have this problem also working in TDMA Mikrotik support answer our questions Ok, but can you improve this behaviuor in future ...
by Lupin
Wed May 08, 2013 10:42 am
Forum: Wireless Networking
Topic: Nv2 Link increases vpn latency
Replies: 4
Views: 1235

Re: Nv2 Link increases vpn latency

We've similar problem without VPN. When there are no bandwidth in use the latency has spike and jitter is unstable. I attach some example on a CPE Ping WITHOUT traffic in use See the spikes and the unstability ping XX.XX.21.129 HOST SIZE TTL TIME STATUS XX.XX.21.129 56 64 2ms XX.XX.21.129 56 64 34ms...
by Lupin
Fri Apr 19, 2013 10:34 pm
Forum: Wireless Networking
Topic: Low Throughput - Sector 90° nv2
Replies: 8
Views: 2752

Re: Low Throughput - Sector 90° nv2

Today we try to add a sector Panel 23dB (433AH+R52Hn MiMo 2x2) on our BTS. We move on it about 3 clients connected with a distance of about 20km (12,4miles). These are RBGroove with 30dB Grid (MiMo 1x1). Signals are about -66/-67 dBm. Trying to change different frequencies the bandwidth from AP to S...
by Lupin
Mon Mar 25, 2013 9:20 am
Forum: Wireless Networking
Topic: Low Throughput - Sector 90° nv2
Replies: 8
Views: 2752

Re: Low Throughput - Sector 90° nv2

Yes, the 5.24 has improved the performance . Now I do a BW-test with 9-12Mbps but also the rate show me 48-54Mbps with a CCQ variable. I see that when the rate go to 36Mbps and the ccq show 64% the bw-test go up to 14Mbps , but after some seconds rate increase to 48-54Mbps and the bw-test decrease t...
by Lupin
Fri Mar 22, 2013 11:01 pm
Forum: Wireless Networking
Topic: Low Throughput - Sector 90° nv2
Replies: 8
Views: 2752

Low Throughput - Sector 90° nv2

We've a RB-Metal with a 90° sector that cover about 25-30 clients (with 5-6Mbps costant involved). THe problem is that most of these has CPE with low throughput. We've already tryed to change frequency but without success. All clients (on this AP) and AP have the RouterOS 5.22 There protocol is nv2 ...
by Lupin
Sun Feb 24, 2013 10:32 pm
Forum: RouterBOARD hardware
Topic: Routerboard Hardware wish list
Replies: 61
Views: 12910

Re: Routerboard Hardware wish list

+1 For higher gain SXT (25dBi)
by Lupin
Mon Feb 11, 2013 7:58 pm
Forum: General
Topic: Sample Installations - Sticky Please
Replies: 230
Views: 136670

Re: Sample Installations - Sticky Please

Repair of a groove metal knocked down by the wind at 150Km/h (93 mph)
8)
by Lupin
Mon Jan 07, 2013 9:04 am
Forum: General
Topic: New Routing Engine
Replies: 7
Views: 1756

Re: New Routing Engine

There aren't networks statically created to be syncronized o not (in "/routing bgp network" there are no entries) but RB continue to annunce them. This behavior happens when there are ring networks: when the main backhaul dies, the ring does not backup Mikrotik replied that: Advertisements of nonexi...
by Lupin
Sun Jan 06, 2013 9:19 pm
Forum: General
Topic: New Routing Engine
Replies: 7
Views: 1756

Re: New Routing Engine

We also hope in a release of new routing package for ROS 5.x I remind you (Staff) that you haven't yet solved the problem that affects all devices that mount RouterOS, in which are announced routes that are not present in the list of routes causing a "TTL Exceeded" (loop) error in the network. This ...
by Lupin
Wed Dec 12, 2012 10:41 pm
Forum: RouterBOARD hardware
Topic: Groove 5Hn - Large number damaged!!
Replies: 5
Views: 1420

Re: Groove 5Hn - Large number damaged!!

ElBoxRf panel 23dB for distance 0-8km
Grid 30dB for distance 9-20km

When I preconfigure the Groove in Lab we use a simple omni connected to the N connector in the 30seconds when we run the configuration script
by Lupin
Wed Dec 12, 2012 10:11 pm
Forum: RouterBOARD hardware
Topic: Groove 5Hn - Large number damaged!!
Replies: 5
Views: 1420

Groove 5Hn - Large number damaged!!

We've bought a stock of about 90 groove and it seems that thirty (30) are damaged . We have sent to RMA and in the meantime bought another stock of 60 and still having problems !! The problem is the Wireless TX that does not work or lose 20dB I have noticed that in the units where the TX does not wo...
by Lupin
Mon Nov 12, 2012 10:32 am
Forum: RouterBOARD hardware
Topic: RB1200: CPU ETH port, PCIe ETH port.. can someone explain?
Replies: 5
Views: 1101

Re: RB1200: CPU ETH port, PCIe ETH port.. can someone explai

I have noticed a strong degrade in performance on ports 9,10 Using these ports the latency is variable from 0 to 30ms I've opened a support ticket The response of Mikrotik was this: Ports ether9 and ether10 on RB1200 are connected through PCI-E controller. Currently these ports have performance limi...
by Lupin
Sat Nov 10, 2012 10:06 pm
Forum: RouterBOARD hardware
Topic: SNR on Optical Fiber
Replies: 4
Views: 1374

SNR on Optical Fiber

Is possible to implement a tab in Winbox/RouterOS to see the SNR (or OSNR), signal strength of the SFP interface.
May it be possible in future release?
Starting with the RB2011 series, but also with a x86 with sfp modules

Thanks!
by Lupin
Sun Oct 28, 2012 11:49 am
Forum: RouterBOARD hardware
Topic: New dish - Need more info
Replies: 3
Views: 709

Re: New dish - Need more info

I saw them in the photos of USA MUM

http://mum.mikrotik.com/gallery/v/US12/

Is this a boxed antenna with MiMo >20dB ?

Could be built by RF-ELEMENTS?
by Lupin
Sun Oct 28, 2012 8:14 am
Forum: RouterBOARD hardware
Topic: New dish - Need more info
Replies: 3
Views: 709

New dish - Need more info

Where I find more details about this?

Image
by Lupin
Tue Oct 23, 2012 10:18 am
Forum: RouterBOARD hardware
Topic: Brackets for Sextant ?
Replies: 5
Views: 1033

Re: Brackets for Sextant ?

My reseller says that they are working on it and would be available in November.
Who is your reseller?
by Lupin
Mon Oct 22, 2012 6:27 pm
Forum: RouterBOARD hardware
Topic: Brackets for Sextant ?
Replies: 5
Views: 1033

Brackets for Sextant ?

What bracket to use with sextant CPE to adjust vertical tilt ?

I've try the ubibracket but seems to slowly fall down, despite pulled the screw to the maximum

Any suggestions? Other bracket type?
ubibracket.jpg
by Lupin
Sat Oct 20, 2012 2:48 pm
Forum: RouterBOARD hardware
Topic: Kernel Failure - RB711UA-5H​nD
Replies: 11
Views: 1652

Re: Kernel Failure - RB711UA-5H​nD

try contact support@mikrotik.com support answer is http://forum.mikrotik.com/viewtopic.php?p=338459#p338459 I have a 711g5hnd that restarts all the time with kernell panic, after setting cpu at 350 worked. Same problem with 250,350,400Mhz Also see what support tell me to do (nothing with cpu) Yeste...
by Lupin
Fri Oct 19, 2012 11:16 am
Forum: RouterBOARD hardware
Topic: Kernel Failure - RB711UA-5H​nD
Replies: 11
Views: 1652

Re: Kernel Failure - RB711UA-5H​nD

Still problems, problems, problems :( :(
by Lupin
Thu Oct 18, 2012 11:08 am
Forum: RouterBOARD hardware
Topic: Kernel Failure - RB711UA-5H​nD
Replies: 11
Views: 1652

Re: Kernel Failure - RB711UA-5H​nD

Problem persist also with 400Mhz Mikrotik tell me to: Try to turn of the watchdog timer (/system watchdog set watchdog-timer=no) which causes router to reboot when software failure occurs and see whether the problem persist. If the router still keeps rebooting, can you tell us how often it reboots. ...
by Lupin
Wed Oct 17, 2012 9:07 am
Forum: RouterBOARD hardware
Topic: Wanted - New hardware from MikroTik
Replies: 46
Views: 10477

Re: Wanted - New hardware from MikroTik

I agree with WirelessRudy. We need a CPE with more gain (like nanoBridge 25dB) Also in the kit, we need a simple serious bracket to adjust the vertical tilt. The poe included would be better with a integrated led (for check the eletrical presence) If possible a version with shield (price high .. obl...
by Lupin
Tue Oct 16, 2012 10:57 pm
Forum: RouterBOARD hardware
Topic: Kernel Failure - RB711UA-5H​nD
Replies: 11
Views: 1652

Re: Kernel Failure - RB711UA-5H​nD

NO usb device Wow... 250Mhz.. :shock: uptime: 6h2m56s version: 5.21 free-memory: 43304KiB total-memory: 62184KiB cpu: MIPS 24Kc V7.4 cpu-count: 1 cpu-frequency: 250MHz cpu-load: 13% free-hdd-space: 30240KiB total-hdd-space: 61440KiB write-sect-since-reboot: 3766 write-sect-total: 100177 bad-blocks: ...
by Lupin
Tue Oct 16, 2012 9:40 pm
Forum: RouterBOARD hardware
Topic: Kernel Failure - RB711UA-5H​nD
Replies: 11
Views: 1652

Re: Kernel Failure - RB711UA-5H​nD

Previously was 2.38
Now 3.0
routerboard: yes
model: 711UA-5HnD
serial-number: 38F401424C83
current-firmware: 3.0
upgrade-firmware: 3.0
by Lupin
Tue Oct 16, 2012 7:41 pm
Forum: RouterBOARD hardware
Topic: Kernel Failure - RB711UA-5H​nD
Replies: 11
Views: 1652

Kernel Failure - RB711UA-5H​nD

Our RB711UA-5HnD with RouterOS 5.18 sometimes reboot with a log of Kernel Failure We tryed to upgrade to 5.21 but the problem persists. We also have open a ticket [Ticket#20​1210166600​0271] (7 hours ago) but with no response. The client had disservice with this problem. Do you know if there is any ...
by Lupin
Mon Oct 15, 2012 10:36 pm
Forum: Wireless Networking
Topic: 5.21 improved nv2 stability
Replies: 3
Views: 2283

Re: 5.21 improved nv2 stability

I've a RB433GL with two radio with 37 clients connected. I try to upgrade the AP to 5.21 and test one client (with good signal) Before client had a Groove with version 5.8 and firmware 2.34 After the upgrade had routeros versione 5.21 and firmware 3.0 The are an increment of the Rx signal of about 4...
by Lupin
Sat Oct 13, 2012 2:27 pm
Forum: Wireless Networking
Topic: "nv2 nstreme 802.11" VS "connect-list"
Replies: 1
Views: 1959

"nv2 nstreme 802.11" VS "connect-list"

It seems that the " connect-list " has lower priority than Wireless Protocol and this causes problems. All my cells have the same SSID. In the example below the sextant, after a reboot, it connects to the cell with NV2 protocol (22:22) despite the long distance and poor signal and there IS NOT prese...
by Lupin
Mon Jun 25, 2012 8:08 am
Forum: RouterBOARD hardware
Topic: RBGPOE won't link at 1G
Replies: 4
Views: 966

Re: RBGPOE won't link at 1G

We too had the same problem.
On a lot ten connector over half presented problems.
Trying to re-crimp them, some come to work, others do not.

Tipical problems is : some have no-link state, others I have only 100Mbps fdx, other 10Mbps (without passing data).
by Lupin
Mon Jun 18, 2012 10:23 am
Forum: General
Topic: Feature Request: MTR
Replies: 72
Views: 25118

Re: Feature Request: MTR

+1 Thanks
by Lupin
Wed May 16, 2012 10:35 am
Forum: RouterBOARD hardware
Topic: Externally connectorized SEXTANT production?
Replies: 5
Views: 1224

Re: Externally connectorized SEXTANT production?

Why do you use a sextant when its antenna is not enough? You're right! I ask, then, a version without his reflector-antenna, but with external pigtail and with everything already mounted. This version is important because have the external LEDs for the "rough alignment" asked by all of our installe...
by Lupin
Wed May 16, 2012 8:56 am
Forum: RouterBOARD hardware
Topic: Externally connectorized SEXTANT production?
Replies: 5
Views: 1224

Externally connectorized SEXTANT production?

I see that Sextant have already a predisposition for external N-type connectors. It's important for connect a dual-chain dish antennas in a long distance client situation. But for do this we have to manually drill the plastic case. There are any plans to release a pre-connettorizzed version of this ...
by Lupin
Tue May 08, 2012 10:02 am
Forum: General
Topic: NOT TO DO. Weird instalations?
Replies: 380
Views: 236669

Re: NOT TO DO. Weird instalations?

There are many bugs!!
by Lupin
Tue Apr 24, 2012 5:48 pm
Forum: Wireless Networking
Topic: How to read Spectral-Scan file
Replies: 6
Views: 3280

Re: How to read Spectral-Scan file

Reply of Mikrotik Support
File save feature was created, but we have not created software to read these
files. Currently you can't do anything with it.
:( :(
by Lupin
Tue Apr 24, 2012 12:30 pm
Forum: Wireless Networking
Topic: How to read Spectral-Scan file
Replies: 6
Views: 3280

How to read Spectral-Scan file

I have performed remotely a Spectral-Scan on a Groove-5Hn of a client using the following command
interface wireless spectral-scan wlan1 duration=30 range=5500-5700 save-file-name=test.txt
Now I've the file, but how to read it?

The text is unreadable.
I need some external software?

Thx
Mirko
by Lupin
Wed Nov 16, 2011 8:43 am
Forum: Wireless Networking
Topic: Real Life Nv2 RouterOS 5.9
Replies: 20
Views: 5946

Re: Real Life Nv2 RouterOS 5.9

How much bandwidth was between the (same) two links with the version 5.8?
What are (technically) the improvements in version 5.9?
by Lupin
Fri Sep 02, 2011 1:02 pm
Forum: General
Topic: NOT TO DO. Weird instalations?
Replies: 380
Views: 236669

Re: NOT TO DO. Weird instalations?

Missing a bolt? No problem!!
You just have to mount "silicon bracket" :lol:
by Lupin
Thu Jul 07, 2011 10:59 pm
Forum: RouterBOARD hardware
Topic: SXT that we would like
Replies: 39
Views: 4148

Re: SXT that we would like

Offset reflectors are working very good. 10dbi more with 55cm. I tried a RB711 + Grid 90cm x 60cm vs SXT + Offset 60cm On the same AP cell with the Offset+SXT I got 3dB less than the other. I thought that would make something better of the grid. Probably would be better with a 5Ghz real feeder ? SX...
by Lupin
Thu Jul 07, 2011 12:35 pm
Forum: RouterBOARD hardware
Topic: SXT that we would like
Replies: 39
Views: 4148

Re: SXT that we would like

I think the product is fine.
SXT Reflectors!
We have already tryed to use offset but the result was not acceptable
why can't you use RB711 in a box and any antenna you choose?
Because with the RB711 and the box there's still much more to assemble and the rb711 isn't MiMo 2x2
by Lupin
Wed Jul 06, 2011 10:40 pm
Forum: RouterBOARD hardware
Topic: SXT that we would like
Replies: 39
Views: 4148

SXT that we would like

The RB-SXT would be an excellent product to be used in multipoint because 1 - There's nothing to assemble (it is ready to use) 2 - It has built-in LED signal for easy alignment 3 - It have MiMO 2x2 and this maximizes spectral efficiency 4 - Very practical The problem is the LOW GAIN !! :( Now, I ask...
by Lupin
Wed May 18, 2011 4:17 pm
Forum: RouterBOARD hardware
Topic: PowerRouter Max Performance ?
Replies: 1
Views: 676

PowerRouter Max Performance ?

Anyone know the performance of: - PowerRouter 2200 Model - PowerRouter 2282f Model http://www.mikrotikrouter.com/2200.asp With both One and/or Two CPU, I want to know: Packets per Second and Maximum Thoughput with Rounting (ON), Conn.Tracking(ON or OFF), Firewall (OFF) Anyone Know these product's pe...
by Lupin
Mon May 02, 2011 9:20 am
Forum: Scripting
Topic: Help with retrieving /interface/wireless > scan data
Replies: 34
Views: 15994

Re: Help with retrieving /interface/wireless > scan data

Why you (mikrotik staff) don't enable the option to save the scans, snooper or freq.usage on a file?
As mentioned before, it doesn't work.. It's too difficult? :(

(waiting for a serious explanation..)
by Lupin
Tue Apr 26, 2011 9:33 pm
Forum: General
Topic: Feature requests
Replies: 1159
Views: 207302

Re: Feature requests

When we can have a MTR Tool like this?

http://winmtr.net/

:)
by Lupin
Mon Apr 25, 2011 11:06 pm
Forum: Wireless Networking
Topic: Really Full-Duplex Wireless with new simple discovery
Replies: 0
Views: 511

Really Full-Duplex Wireless with new simple discovery

A system with two antennas that transmit permits to delete the signal and with a third antenna to capture the remote signal. Fantastic!! :D

http://sing.stanford.edu/fullduplex/
by Lupin
Thu Mar 10, 2011 10:21 pm
Forum: RouterBOARD hardware
Topic: New Products
Replies: 188
Views: 28662

Re: New Products

I hoped to see the SXT 20dB antenna in list.
It would be perfect! sigh :(
by Lupin
Tue Feb 01, 2011 7:42 pm
Forum: Scripting
Topic: API - Delete SMS by ID
Replies: 0
Views: 854

API - Delete SMS by ID

I want to delete a SMS using his ID with API (VB.NET)
But with this, doesn't work.
Dim mk As New MyLibrary.MK("192.168.88.1")
mk.Login("admin", "123456")
mk.Send("/tool/sms/inbox/remove", False)
mk.Send("=.id=*1, True)
mk.Read()
mk.Close()
What is wrong?
(RB433UAH v5.0rc7 with USB Modem)
by Lupin
Tue Oct 05, 2010 9:35 am
Forum: Wireless Networking
Topic: MIMO A/B ... Possible?
Replies: 0
Views: 825

MIMO A/B ... Possible?

Is it possible to use the "MIMO A" and/or "MIMO B" .. perhaps with an automatic algorithm? "MIMO A" uses the two polarizations to send the same data doubling the chances that the data reaches its destination (for CPE with low signal or long-distance) "MIMO B" uses the two polarizations to send more ...
by Lupin
Thu Sep 16, 2010 10:12 pm
Forum: Forwarding Protocols
Topic: BGP over L2TP?
Replies: 7
Views: 3561

Re: BGP over L2TP?

Confirm the presence of problems using l2tp tunnel for BGP backup.

I resolved with EoIP and DynDNS script but it would have been cleaner with a tunnel l2tp :(
by Lupin
Thu Sep 16, 2010 10:07 pm
Forum: Forwarding Protocols
Topic: BGP Failover
Replies: 7
Views: 3490

Re: BGP Failover

Try with adding a +2 prepend on the unwanted peer
by Lupin
Tue Sep 07, 2010 9:29 am
Forum: Forwarding Protocols
Topic: BGP over L2TP?
Replies: 7
Views: 3561

BGP over L2TP?

I want to create a Backup of my backbone over an external Internet connection. External ISP give me a PPPoE account with a dinamic ip. So I've a RB that do peer with my backbone network and another RB that do PPPoE with other ISP and l2tp tunnel to my datacenter over Internet. In datacenter there is...
by Lupin
Sat Jul 31, 2010 9:11 pm
Forum: Wireless Networking
Topic: R52n - mode a Turbo?
Replies: 7
Views: 1654

Re: R52n - mode a Turbo?

I need much more bandwidth on ptp link If I replace my ptp link with "N cards" and after this I've not stable link , the only thing I can do is set Turbo mode but if the cards doesn't support it I have to physically go to replace them. My question is: does, this card, support 802.11a Turbo mode in f...
by Lupin
Fri Jul 30, 2010 10:54 pm
Forum: Wireless Networking
Topic: R52n - mode a Turbo?
Replies: 7
Views: 1654

Re: R52n - mode a Turbo?

On routerboard.com I see Details Product code R52N 802.11a yes 802.11b yes 802.11g yes 802.11n yes Connector uFl Format miniPCI Chipset AR9220 Output power 25dBm 2GHz Yes 5GHz Yes 802.11 Turbo mode support No Operating Temperature -50℃ to +70℃ RouterOS compatibility v4 Why it doesn't support 802.11 ...
by Lupin
Fri Jul 30, 2010 7:38 pm
Forum: Wireless Networking
Topic: R52n - mode a Turbo?
Replies: 7
Views: 1654

R52n - mode a Turbo?

There isn't "5Ghz-turbo" mode A (40Mhz size channel) ?
by Lupin
Thu Jul 15, 2010 12:32 am
Forum: General
Topic: Multiple attributes "WISPr-Location-Name"
Replies: 5
Views: 1032

Re: Multiple attributes "WISPr-Location-Name"

I haven't tried this '+=' op for quite a while, so I am a bit rusty. Did you try this combination? WISPr-Location-Name += hotspot1 WISPr-Location-Name == hotspot2 Yes, in this your case work only on hotspot2 ADD: I don't know what your goal is, but can you assign the same 'radius-location-name' to ...
by Lupin
Wed Jul 14, 2010 5:02 pm
Forum: General
Topic: Multiple attributes "WISPr-Location-Name"
Replies: 5
Views: 1032

Re: Multiple attributes "WISPr-Location-Name"

I try with WISPr-Location-Name := hotspot1 WISPr-Location-Name += hotspot2 doesn't work (error message is "Radius is not responding") try also WISPr-Location-Name == hotspot1 WISPr-Location-Name += hotspot2 work only on hotspot1 (then doesn't work ) try also WISPr-Location-Name += hotspot1 WISPr-Loc...
by Lupin
Wed Jul 14, 2010 2:07 pm
Forum: General
Topic: Multiple attributes "WISPr-Location-Name"
Replies: 5
Views: 1032

Multiple attributes "WISPr-Location-Name"

How to set the radius attribute to more location names? Is possible? :? for example (does not work): WISPr-Location-Name = hotspot1 , hotspot2 in this case (theoretically) the user can connect to mikrotik hotspot with location-name = hotspot1 and connect to the mikrotik hotspot with location-name = ...
by Lupin
Mon May 31, 2010 8:50 pm
Forum: General
Topic: RouterOS v4.10 released
Replies: 63
Views: 14619

Re: RouterOS v4.10 released

lcd - added support for AX89063
any link with image/details examples?
by Lupin
Thu May 13, 2010 11:58 am
Forum: General
Topic: Erase all command history
Replies: 3
Views: 801

Erase all command history

There are a command to clear instantly the cache with all executed command of that user (or all users) ?
So that another user by pressing the keyboard arrows can't see the latest commands executed?
by Lupin
Fri Apr 30, 2010 9:26 pm
Forum: General
Topic: MikroTik RouterOS version 5.0beta2 released!
Replies: 139
Views: 44895

Re: MikroTik RouterOS version 5.0beta2 released!

however soon you will see lots of other wireless improvements, this is only the beginning
:shock:

For example?
Give us a preview..
by Lupin
Thu Apr 08, 2010 6:35 pm
Forum: Scripting
Topic: Mac-Telnet from API
Replies: 1
Views: 850

Mac-Telnet from API

Is possibile to execute mac-telnet from API?
Entering with API in the Access Point and launch mac-telnet to a know mac-address station connected?

Any examples?
by Lupin
Wed Mar 31, 2010 11:23 am
Forum: General
Topic: RB 433ah Freeze
Replies: 0
Views: 317

RB 433ah Freeze

I have two RB433AH connected to a switch.
Yesterday one is freezed.

On other RB I can't access through IP and mac-telnet
but is visible from IP NEIGHBORS

How can I fix it from remote?
by Lupin
Tue Mar 30, 2010 1:54 pm
Forum: Wireless Networking
Topic: Tx-SNR on the AP ?
Replies: 6
Views: 961

Re: Tx-SNR on the AP ?

Like this?
Is possible?

Normis?
by Lupin
Wed Mar 17, 2010 11:29 pm
Forum: Wireless Networking
Topic: Tx-SNR on the AP ?
Replies: 6
Views: 961

Re: Tx-SNR on the AP ?

AP and client are Mikrotik devices.

On the AP I see:
Rx/Tx CCQ
Rx/Tx Signal Strength
Rx/Tx Data Rate
Rx Signal to Noise Ratio (SNR)
Rx Noise Floor

Why I can't see Tx SNR (or Tx Noise Floor)??
by Lupin
Tue Mar 16, 2010 9:31 pm
Forum: Wireless Networking
Topic: Tx-SNR on the AP ?
Replies: 6
Views: 961

Re: Tx-SNR on the AP ?

you can goto "wireless > registration table > "double click on the wlan you want to see" > and check the signal on the prompt up windows.
ok, but here i see only SNR on the AP side. How to see SNR on client side without connect every client and open his registration table?
by Lupin
Tue Mar 16, 2010 12:01 pm
Forum: Wireless Networking
Topic: Tx-SNR on the AP ?
Replies: 6
Views: 961

Re: Tx-SNR on the AP ?

Any news? :(
by Lupin
Sun Mar 14, 2010 11:37 am
Forum: Wireless Networking
Topic: Tx-SNR on the AP ?
Replies: 6
Views: 961

Tx-SNR on the AP ?

Can I see remote SNR directly on the "Registration TAB" of the AP?

Now I see the rx-SNR of the client, but how to see tx-SNR ?
by Lupin
Sun Feb 28, 2010 8:16 pm
Forum: General
Topic: QoS with dynamic bandwitdh
Replies: 5
Views: 922

Re: QoS with dynamic bandwitdh

The solution might be to determine when a link is congested and dynamically change the max-limit with the maximum capacity of the link.
But I don't know how. Do you have any ideas?
by Lupin
Sat Feb 27, 2010 10:18 pm
Forum: General
Topic: QoS with dynamic bandwitdh
Replies: 5
Views: 922

Re: QoS with dynamic bandwitdh

Suppose to have 10Mbps garanted at the source (point A) now distribute 10Mbps to other 4 points (points B,C,D,E) A-->B-->20 Clients A-->C-->10 Clients A-->D-->50 Clients A-->E-->10 Clients for the big quantity of traffic I put the traffic priority rules on point B,C,D,E How to set max-limit on queue...
by Lupin
Thu Feb 25, 2010 10:47 pm
Forum: General
Topic: QoS with dynamic bandwitdh
Replies: 5
Views: 922

QoS with dynamic bandwitdh

Is possible manage the QOS without knowing the maximum bandwidth available? For example, if I have a band from 10Mbps to 15Mbps and I want to give priority to VoIP traffic. If I create 2 queue with different priority without max-bandwith.. works? I have to set the maximum bandwidth available? but if...
by Lupin
Sun Feb 21, 2010 1:32 pm
Forum: Wireless Networking
Topic: trasparent repeater with rb411
Replies: 2
Views: 728

Re: trasparent repeater with rb411

On the RB411 create a bridge.
Add to the bridge the ether1 and wlan1

Set the wlan1 to ap-bridge and set wds mode to dynamic and the wds default bridge

now connect other station setting the wireless mode to "station wds"


Bye
by Lupin
Thu Dec 24, 2009 11:48 am
Forum: Scripting
Topic: API reset in Reg-Table statistics
Replies: 2
Views: 1172

Re: API reset in Reg-Table statistics

Thanks works great !! :D
by Lupin
Wed Dec 23, 2009 4:59 pm
Forum: Scripting
Topic: API reset in Reg-Table statistics
Replies: 2
Views: 1172

API reset in Reg-Table statistics

I'm using the PHP API Class
How to execute the equivalent in telnet
/interface wireless registration-table reset 0
??
by Lupin
Sun Nov 22, 2009 5:43 pm
Forum: General
Topic: Separate DSL on one routerboard
Replies: 2
Views: 557

Re: Separate DSL on one routerboard

My configuration example is: ip firewall mangle> 0 chain=prerouting src-address=1.1.1.0/26 action=mark-routing new-routing-mark=DSL1 passthrough=yes 1 chain=prerouting src-address=2.2.2.0/26 action=mark-routing new-routing-mark=DSL2 passthrough=yes ip address> 0 1.1.1.1/26 ether1 1 2.2.2.1/26 ether2...
by Lupin
Fri Nov 20, 2009 11:57 pm
Forum: General
Topic: Separate DSL on one routerboard
Replies: 2
Views: 557

Separate DSL on one routerboard

How to use multiple separate DSL on a single Routerborad? See the scheme pc1 ------ -----DSL1 pppoe (1.1.1.2) | | | | |--- S W I T C H---- | | | | | | pc2------ | -----DSL2 pppoe (2.2.2.2) | | | ether1 (1.1.1.1) Mikrotik 750 (2.2.2.1) ether2 PC1 and PC2 are on public ip in differente class. DSL are ...
by Lupin
Mon Nov 16, 2009 1:50 pm
Forum: General
Topic: Double pppoe-client on same RB ??
Replies: 14
Views: 1863

Re: Double pppoe-client on same RB ??

If I use bridge I've only ONE mac-address and I can't create multiple PPPoE-Client On my RB if I create this situation: Bridge1 - ether1 --------> SWITCH1 - wlan1 - wlan2 Ether2 --------> SWITCH1 Ether3 --------> SWITCH1 PPPoE1 on ether2 PPPoE2 on ether3 ..all works but I can't create more than 2 pp...
by Lupin
Mon Nov 16, 2009 1:06 pm
Forum: General
Topic: Double pppoe-client on same RB ??
Replies: 14
Views: 1863

Re: Double pppoe-client on same RB ??

I still can't understand, why you heed bridge I've to propagate a single /26 to all my bridged network. If I put same class of IP in different interface they don't work! maybe, your pppoe-client should be added to bridge, not ether*?.. If I add pppoe in the bridge I can connect only ONE pppoe, and ...
by Lupin
Sun Nov 15, 2009 5:24 pm
Forum: General
Topic: Double pppoe-client on same RB ??
Replies: 14
Views: 1863

Re: Double pppoe-client on same RB ??

Chupaka thanks for your time :D I don't know your network topology My network is all Bridged for now. I put a single class of 64 ip with a simmetric 10Mbps provide from my isp on the RB source and then distribute to all my clients over multiple wireless repeater points. All this creating a pppoe on ...
by Lupin
Sun Nov 15, 2009 1:49 am
Forum: General
Topic: Double pppoe-client on same RB ??
Replies: 14
Views: 1863

Re: Double pppoe-client on same RB ??

What do you advise me to use?
by Lupin
Sat Nov 14, 2009 8:45 am
Forum: General
Topic: Double pppoe-client on same RB ??
Replies: 14
Views: 1863

Re: Double pppoe-client on same RB ??

Now, I have a bridged network where bridge1 contains ether1 ether2 wlan1 wlan2. My ISP provides one connection per mac-address How to create 2 pppoe-client in the same routerboard and mantain all bridged? For example I try to create a bridge2 but I can't add the same ethernet and wireless interfaces...
by Lupin
Thu Nov 12, 2009 1:58 pm
Forum: General
Topic: Double pppoe-client on same RB ??
Replies: 14
Views: 1863

Re: Double pppoe-client on same RB ??

Log says:
pppoe-out2: inizializing...
pppoe-out2: dialing...
pppoe-out2: terminating... - disconnected
pppoe-out2: disconnected

At certain moments they are both connected.
but after a few minutes one of them si disconected
by Lupin
Thu Nov 12, 2009 12:59 pm
Forum: General
Topic: Double pppoe-client on same RB ??
Replies: 14
Views: 1863

Re: Double pppoe-client on same RB ??

I try to connect pppoe1 on ether1 and pppoe2 on ether2 but only ONE get connetted.
This on a single rb433ah with v.3.30

If I try on different RB the connection is established.

Why?
by Lupin
Wed Nov 11, 2009 10:43 pm
Forum: General
Topic: Double pppoe-client on same RB ??
Replies: 14
Views: 1863

Double pppoe-client on same RB ??

Is possible to create two (or more) pppoe-client on the same RB?
by Lupin
Thu Oct 29, 2009 11:55 am
Forum: General
Topic: Check RB memory (ram) remotely
Replies: 2
Views: 529

Re: Check RB memory (ram) remotely

[admin@MikroTik] /queue simple> pr Flags: X - disabled, I - invalid, D - dynamic 0 name="queue1" dst-address=0.0.0.0/0 interface=ether1 parent=none direction=both priority=8 queue=default-small/default-small limit-at=0/0 max-limit=256k/4096k burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s total...
by Lupin
Thu Oct 29, 2009 10:35 am
Forum: General
Topic: Check RB memory (ram) remotely
Replies: 2
Views: 529

Check RB memory (ram) remotely

Is possible to control the volatile memory of routerboard?

Explain:
On a RB411 (3.30) I've a packet loss and, pinging its own public IP's, I loss packets (10%).

Disabling the queue packets are not lost more.

What could it be?
Can I check the RAM remotely?
by Lupin
Thu Oct 01, 2009 5:17 pm
Forum: Wireless Networking
Topic: Bug winbox 5Ghz-Turbo
Replies: 1
Views: 484

Bug winbox 5Ghz-Turbo

On ros 3.23 <--> 3.30 when I'll try to change in 5Ghz-Turbo the list of frequency are all frequencies out of phase of 5Mhz

Is a Bug??
by Lupin
Thu Oct 01, 2009 3:14 pm
Forum: Wireless Networking
Topic: SNR or Signal-Strenght ??
Replies: 1
Views: 543

SNR or Signal-Strenght ??

To keep a radio cell with the highest quality is better reference values "Signal-Strength" or "SNR" value for connect new users to the cell? Example with R52 1 - A user with noisefloor:-105 and signal-strength -85 (20dB SNR) is a good value? 2 - User with noisefloor: -93 and signal-strenght -73 (20d...
by Lupin
Tue Sep 15, 2009 11:54 am
Forum: General
Topic: NAS payment and free. It's possible?
Replies: 2
Views: 435

Re: NAS payment and free. It's possible?

Thanks a lot.

Works great!
by Lupin
Tue Sep 15, 2009 9:08 am
Forum: General
Topic: NAS payment and free. It's possible?
Replies: 2
Views: 435

NAS payment and free. It's possible?

I have some public NAS(free without pay) and some payment NAS (hotel).
It's possibile to ensure that a "free user" can browse on certain NAS (free) and not on others(hotel)?
As a paying user navigates on everyone?

NAS is mikrotik and have a central freeradius.
by Lupin
Fri Aug 21, 2009 3:01 pm
Forum: General
Topic: Hotspot extension over cable
Replies: 3
Views: 483

Re: Hotspot extension over cable

On your second you should have:
- vlan1 under ether1
- bridge (vlan1 and wlan1) with ip 192.168.20.2.
I tried this with no success. Why?
On the first RB ip address are on VLAN1
On the second RB ip address are on BRIDGE (vlan1+wlan1)

but not ping. :?
by Lupin
Fri Aug 21, 2009 11:50 am
Forum: General
Topic: Hotspot extension over cable
Replies: 3
Views: 483

Re: Hotspot extension over cable

Nobody has ever tried?
by Lupin
Wed Aug 19, 2009 10:01 pm
Forum: General
Topic: Hotspot extension over cable
Replies: 3
Views: 483

Hotspot extension over cable

I want to extend my 1st hostspot with the 2st connected by cable I've two 411 (only one ethernet for RB!!) On the 1st there is : - ether1 for internet and public ip - bridge (wlan1 + vlan1) for the hotspot with private ip NAT 1:1 (for the client 192.168.1.x) - vlan1 are created under the ether1 with...
by Lupin
Wed Jun 03, 2009 1:52 pm
Forum: General
Topic: Winbox window won't scale for small (netbook) displays
Replies: 14
Views: 15156

Re: Winbox window won't scale for small (netbook) displays

Where is the link for the new Winbox?

In download section "Winbox configuration tool 2.2.14"
by Lupin
Wed Apr 01, 2009 9:34 pm
Forum: Beginner Basics
Topic: Hotspot NAT question
Replies: 11
Views: 1409

Re: Hotspot NAT question

I think that is enough to put the hotspot on an interface and internal network on other interface and, if you haven't any free interface, you should use vlan.
And, yes, add "accept" rule
Can you try it?
by Lupin
Wed Apr 01, 2009 8:32 pm
Forum: Beginner Basics
Topic: Hotspot NAT question
Replies: 11
Views: 1409

Re: Hotspot NAT question

Put all networks with free access before your hotspot interface and routing them.
by Lupin
Wed Apr 01, 2009 8:21 pm
Forum: General
Topic: Need help forwarding ip
Replies: 6
Views: 693

Re: Need help forwarding ip

post a network diagram, please
by Lupin
Mon Mar 30, 2009 10:08 pm
Forum: General
Topic: Need help forwarding ip
Replies: 6
Views: 693

Re: Need help forwarding ip

If they are in different interfaces and you want to masquerade use NAT IP > Firewall > NAT Add [CHAIN] Chain: srcnat Out. Interface: <yourWanInterface> [ACTION] masquerade http://wiki.mikrotik.com/wiki/MikroTik_RouterOS_Frequently_Asked_Questions_-_FAQ#TCP.2FIP_Related_Questions http://www.mikrotik....
by Lupin
Mon Mar 30, 2009 10:00 pm
Forum: General
Topic: Mikrotik WallPapers
Replies: 15
Views: 7530

Re: Mikrotik WallPapers

How? Do not you know?
"Rounting the universe"

With Mikrotik ... you Can !!

:lol: :lol: :lol:
by Lupin
Sun Mar 29, 2009 3:44 pm
Forum: General
Topic: Mikrotik WallPapers
Replies: 15
Views: 7530

Re: Mikrotik WallPapers

My Wallpaper :D :D
by Lupin
Sun Mar 29, 2009 12:35 pm
Forum: Beginner Basics
Topic: hotspot error
Replies: 4
Views: 577

Re: hotspot error

It's normal.
Also in my hotspot there is a red rule

http://forum.mikrotik.com/download/file.php?id=1735
by Lupin
Sun Mar 29, 2009 12:05 pm
Forum: Beginner Basics
Topic: hotspot error
Replies: 4
Views: 577

Re: hotspot error

What error?
by Lupin
Sun Mar 29, 2009 11:48 am
Forum: Beginner Basics
Topic: Hotspot NAT question
Replies: 11
Views: 1409

Re: Hotspot NAT question

out:[192.168.105.12/24] in:[192.168.122.1/24] run hotspot on vlan1 | |Route | vlan2[172.16.0.1/24] internal network | | | clients[17.16.0.x/24] Your clients With this configuration your clients get full access in network 172.16.0.x/24 but when try to connect to 192.168.x.x or other then will be rou...