Community discussions

Search found 36 matches

by tomi_isp
Thu Jul 07, 2016 9:35 pm
Forum: General
Topic: ARP table filling by 00:00:00:00:00:00
Replies: 6
Views: 1652

Re: ARP table filling by 00:00:00:00:00:00

I see that you are using  VLAN_666
The beast has distorted your view ... it's 555
there are both, 555 and 666 :)
by tomi_isp
Thu Jul 07, 2016 8:32 pm
Forum: General
Topic: ARP table filling by 00:00:00:00:00:00
Replies: 6
Views: 1652

Re: ARP table filling by 00:00:00:00:00:00

for me it looks as IP scanner too but I cannot catch a source, unathorized access to network is almost impossible (but not absolute impossible), that was first what I check if some try hack over Wifi but I not found any suspicous activity nowhere (in truth I found one unknown MAC on one Wifi AP what...
by tomi_isp
Thu Jul 07, 2016 12:31 am
Forum: General
Topic: ARP table filling by 00:00:00:00:00:00
Replies: 6
Views: 1652

ARP table filling by 00:00:00:00:00:00

Hi, today I spot on my router this odd thing, ARP table is filling up with non-existent IPs with 0's MACs, odd thing is it happens only on two VLAN adapters and IPs are adding to list from backward (254,253,252...). That VLANs had a networks 192.168.66.xx and 55.x and it is filled in loop like 66.25...
by tomi_isp
Tue Jan 13, 2009 6:36 pm
Forum: General
Topic: Radius & PPTP
Replies: 15
Views: 1775

Re: Radius & PPTP

No, you can't. 1) use mutiple profiles, or 2) rethink what you are doing. Based on what I am reading, there should be better ways to achieve what you want... how you mean that multiple profiles ? Profiles is only for Local Users, not ? And I talk about radius. I have multiple profiles and they are ...
by tomi_isp
Tue Jan 13, 2009 6:01 pm
Forum: General
Topic: Radius & PPTP
Replies: 15
Views: 1775

Re: Radius & PPTP

why not just set it in profile? =)
because I have some VPNs what have differenet Local IPs than others (for example LAN-to-LAN VPN have another local ip than Remote Users)
and another q, its possible select Profiles over radius ?
by tomi_isp
Mon Jan 12, 2009 2:43 pm
Forum: General
Topic: Radius & PPTP
Replies: 15
Views: 1775

Radius & PPTP

Hi,

question, maybe BFU ;)

- how I can set ,,Local IP,, address for PPTP user when is authorizing over Radius ? If I not have set this IP in default profile in PPP, users are after authorizing at Radius disconected


Thanks

/Tomi
by tomi_isp
Sat Jan 10, 2009 4:49 pm
Forum: General
Topic: Bridge -> lost VPN connections
Replies: 2
Views: 845

Re: Bridge -> lost VPN connections

You might need to move the IP addresses from being assigned to the interfaces, to assigned to the bridge interface that the physical interfaces are members of. You might also need to review the IP address block assignments. You had 192.168.0.x/17 before and now your new DSL router has 192.168.0.x/?...
by tomi_isp
Sat Jan 10, 2009 3:06 am
Forum: General
Topic: Bridge -> lost VPN connections
Replies: 2
Views: 845

Bridge -> lost VPN connections

Hi, I have one problem, scenario : Mikrotik router (primary, firewall LAN<>INET) there is 2 NICs, LAN (192.168.0.x/17) and DSL (10.0.0.1/30) LAN side is used normalny for LAN DSL is used to connect DSL modem, modem (10.0.0.2/30) is running in bridge mode = PPPoE connection is created on Mikrotik rou...
by tomi_isp
Fri Oct 27, 2006 3:49 am
Forum: Scripting
Topic: Address-list dynamic->static
Replies: 13
Views: 9382

thanks for reply, but as I think out right, that last script remove IP from all lists if that IP exist in other lists too ? Or I am worng ?

/Tomi
by tomi_isp
Fri Oct 27, 2006 12:33 am
Forum: Scripting
Topic: Address-list dynamic->static
Replies: 13
Views: 9382

thanks all, seems it work fine, I go experimenting :) but also another small q :) Its possible remove by script whole list by ,,list name,, ? For similar thing can be used the same script but without ,,/ip fire add add list=static-list address=$w,, but it delete IP in all lists, I need only remove w...
by tomi_isp
Thu Oct 26, 2006 11:18 pm
Forum: Scripting
Topic: Address-list dynamic->static
Replies: 13
Views: 9382

thanks, I try test it later in night :)
by tomi_isp
Thu Oct 26, 2006 9:34 pm
Forum: Scripting
Topic: Address-list dynamic->static
Replies: 13
Views: 9382

thanks for intersting :) If you can help, help me :) I used this list for blacklisting attackers, this list also exported to mysql db and in changed form imported back to router under another name (this is ,,managment,,) It sounds crazy but its very effective, because this list (from sql) I also gen...
by tomi_isp
Thu Oct 26, 2006 1:07 pm
Forum: Scripting
Topic: Address-list dynamic->static
Replies: 13
Views: 9382

Address-list dynamic->static

Hi, can anyone help me how to convert all dynamic entries in address-list to normal static entry ? I have used addr-list to block attackers (portscan, port traps..) but all IPs are added to list as dynamic and manualy ,,convert,, all ,,D,, to ,,nonD,, is little bit time consume and tiresome (daily a...
by tomi_isp
Wed Sep 27, 2006 5:27 pm
Forum: General
Topic: redirect local clients to local SMTP
Replies: 2
Views: 981

redirect local clients to local SMTP

Hi, I want try do this thing but I cannot make it work :( I want redirect all SMTP traffic from local clients what want connect to outside smtp's to local smtp server. I try add on main router (LAN<>INET) this rule : chain=dstnat src-address=!10.0.0.200 protocol=tcp dst-port=25 action=dst-nat to-add...
by tomi_isp
Tue Sep 12, 2006 3:18 am
Forum: Scripting
Topic: script for address-list
Replies: 4
Views: 1875

script for address-list

Hi,

can anyone help me how to write script what search address-list for defined IP and delete it if is present ? best will be if that script can search only in defined list, not in all. I trying some scripts but not succesed :(

Thanks

/Tomi
by tomi_isp
Fri Sep 08, 2006 1:20 pm
Forum: General
Topic: transparent redirect ip to ip
Replies: 3
Views: 1919

Hi, I need forward, but DSTNAT work but after short time connection is lost. Joke is in one thing, I need this for friends what have game server in network, this server use only one UDP port and from internet is that port NATed to local IP , for example 10.0.0.1:10000 (udp) -> 192.168.0.2:10000, for...
by tomi_isp
Fri Sep 08, 2006 12:20 am
Forum: General
Topic: transparent redirect ip to ip
Replies: 3
Views: 1919

transparent redirect ip to ip

Hi, can anyone help me with this thing ? I tried some config but in not work fine. Situation is, I need redirect one local IP to another when that IP tries to connect on our public IP :) Example : public IP : 10.0.0.1 client IP : 192.168.0.1 local IP where must be redirect : 192.168.0.2 I need : whe...
by tomi_isp
Thu Aug 31, 2006 9:58 pm
Forum: General
Topic: Remote logging problem
Replies: 8
Views: 3676

thanks to all, now I find problem, remote logging dont want work until anything is logged localy. After disabling all local logs , remote start working, its little strange but ok :)

/Tomi
by tomi_isp
Wed Aug 30, 2006 10:46 pm
Forum: General
Topic: Remote logging problem
Replies: 8
Views: 3676

normal logging works, only remote not, here is the config what I use (but I try many other various combination) / system logging add topics=info prefix="" action=disk disabled=no add topics=error prefix="" action=disk disabled=no add topics=warning prefix="" action=disk disabled=no add topics=critic...
by tomi_isp
Wed Aug 30, 2006 5:18 pm
Forum: General
Topic: Remote logging problem
Replies: 8
Views: 3676

thanks for answer, but you describe only setup. I have setup already but problem is in , why MT not send any data out when is set to remote logging, I sniff traffic but nothing goes from MT -> remote_host:514, nothing.... I try various config in MT but nothing help, still silence...

/Tomi
by tomi_isp
Wed Aug 30, 2006 3:24 pm
Forum: General
Topic: Remote logging problem
Replies: 8
Views: 3676

nobody ? everybody have it working without problems ?? :(

/Tomi
by tomi_isp
Mon Aug 21, 2006 1:08 pm
Forum: General
Topic: Remote logging problem
Replies: 8
Views: 3676

Remote logging problem

Hi, I try to setup remote logging from MT (2.9.27) to unix machine but without any success, MT not send anything... I try MT_syslog too on win machine but the same result (when I send message from MT_syslog to unix it works), MT send nothing and I not see in MT any connections to port 514. Whats wro...
by tomi_isp
Mon Nov 21, 2005 5:21 pm
Forum: General
Topic: MT and USB DSL modems
Replies: 3
Views: 960

I use option ADSL-ETH-MT too(Acatel SpeedTouch) and I am happy with this but I has one unused ADSL USB modem and I only thinkout about using it as backup :)

/Tomi
by tomi_isp
Sun Nov 20, 2005 1:25 am
Forum: General
Topic: MT and USB DSL modems
Replies: 3
Views: 960

MT and USB DSL modems

Hi, what USB DSL modems are supported in MT ? I see in change log : fixed bug - USB modems did not get recognized; but in manual I not see any USB modems. I try connect ADSL USBB modem and I see it in resource/usb as : Name : ADSL USB MODEM ; Device : 1:2 and thats all. Modem what I test is Microcom...
by tomi_isp
Thu Nov 03, 2005 9:08 pm
Forum: General
Topic: domain redirect in MT
Replies: 1
Views: 657

domain redirect in MT

Hi,

I want ask, is possible make domain redirection based on hostname in mikrotik ? I mean like this :
- *.domain1.com (external ip) -> internal ip 10.0.0.1
- *.domain2.com (external ip) -> internal ip 10.0.0.2
etc..

Can anyone help me ? :)

/Tomi
by tomi_isp
Wed Nov 02, 2005 6:47 pm
Forum: General
Topic: EoIP-Bridge problem - Urgent Pls !
Replies: 1
Views: 729

problem resolved, problem sit in MAC of EoIP tunnel, I use MAC like FF:FD:00:00:00:01 and :02 and this seems Bridge dont like, after changing to something like 01:AA:BB:00:00:10 port in bridge with EoIP start working. :)

/Tomi
by tomi_isp
Wed Nov 02, 2005 5:39 pm
Forum: General
Topic: EoIP-Bridge problem - Urgent Pls !
Replies: 1
Views: 729

EoIP-Bridge problem - Urgent Pls !

Hi, I try upgrade two wifi routers from 2.8.28 to 2.9.6 and both routers stop working. In old version I use config WIFI-WDS-L2TP-EOIP-BRIDGE-ETH, same on both sides and work ok. After upgrade I cannot add EoIP tunnel to bridge, when I add EoIP to bridge is stil EoIP showing as ,,disabled,, in bridge...
by tomi_isp
Tue Nov 01, 2005 1:45 am
Forum: General
Topic: Filter Incoming Web Site connection to Server
Replies: 4
Views: 1290

Andrew, I doubt it could be made the way you probose because you probably break the TCP connection. The HTTP header is transmitted after the TCP connection is established. What can be done is to separate by domains. I.e., register multiple domains with the same IP address, then setup MT as a proxy ...
by tomi_isp
Mon Oct 31, 2005 9:19 pm
Forum: General
Topic: Web proxy in 2.9.6 - problem ?
Replies: 0
Views: 650

Web proxy in 2.9.6 - problem ?

Hi, I see one strange thing in web-proxy in 2.9.6, from time to time (sometime in ~10-15min) is webproxy ,,restarting,, himself, all counters are set to 0 include ,,Reserved for cache,, what is in config set to 100MB! and stop caching, counter ,,cache size,, is stil on 0. Normal :) or something bad ...
by tomi_isp
Tue Oct 11, 2005 1:30 pm
Forum: General
Topic: Piece of usefull (??!?) hardware for routeros
Replies: 9
Views: 1628

Your Idea sounds OK but I think some of you problems could be solved by putting the router into "Safe Mode" before you start doing any changes, this is done from a terminal session by pressing CTRL-x Once you are done and sure your config is OK press CTRL-x again and commit the config changes. If y...
by tomi_isp
Mon Oct 10, 2005 9:31 pm
Forum: General
Topic: Piece of usefull (??!?) hardware for routeros
Replies: 9
Views: 1628

Another Idea.. "Extend" the serial line down, (Pull a second Cat5) from the box to the ground or other point of access and terminate to a DB9 or I think Emulex makes a serial to ethernet adapter... to access the router via a net connection.. Craig my english is not bad but not best too but I not un...
by tomi_isp
Sun Oct 09, 2005 7:12 pm
Forum: General
Topic: Piece of usefull (??!?) hardware for routeros
Replies: 9
Views: 1628

Piece of usefull (??!?) hardware for routeros

Hi, I want share one my idea for mikrotik here with others users. Idea is simple and it seems very usefull, for me of course :) but I want hear others users sugestions too. I think many users has nightmare from mistakes when configuring mikrotik on remote place with bad access (roofs....) and if whe...
by tomi_isp
Thu Oct 06, 2005 7:14 pm
Forum: Scripting
Topic: Queue tree data
Replies: 1
Views: 1006

Queue tree data

Hi,

is possible read via script actual values : bps or bytes or packets from queue in queue tree ? How ? :)

Thanks

/Tomi
by tomi_isp
Sat Sep 24, 2005 6:11 pm
Forum: Scripting
Topic: Dynamic queue based on another queue
Replies: 4
Views: 1593

Here is the queues : 0 name="FTPPASV" parent=STDSL flow=FTPPASV limit-at=64000 queue=shape priority=8 max-limit=360000 burst-limit=0 burst-threshold=0 burst-time=0 1 name="FTPSRV" parent=STDSL flow=FTPSRV limit-at=64000 queue=shape priority=7 max-limit=150000 burst-limit=0 burst-threshold=0 burst-ti...
by tomi_isp
Wed Sep 21, 2005 7:32 pm
Forum: Scripting
Topic: Dynamic queue based on another queue
Replies: 4
Views: 1593

not work as I need :(
Any other ideas ?

/Tomi
by tomi_isp
Mon Sep 19, 2005 2:12 pm
Forum: Scripting
Topic: Dynamic queue based on another queue
Replies: 4
Views: 1593

Dynamic queue based on another queue

Hi, can anyone help me with this problem ? I think I see something about similar thing in forum but I cannot found it. I need to do this : - 2 queues in Queue Tree - one example for FTP second for Voip - this queues work fine but priority not, Voip has priority 1 and FTP 8 but when FTP goes on fullt...