Announcing each /24 "just because" is a waste of resources in the global BGP table. Unfortunately, lots of orgs do this as a matter of practice, but ideally, only the minimum number of prefixes should be advertised in order to cover your routing policy. Prepend x6 to the opposite ISP will...

So if I get this right, you want the traffic for the /24 to come via Provider 1, and everything else to come via provider 2. You also want everything to fail over to provider 1 if Provider 2 goes down. Okay - let's say that you have prefixes a.a.0.0/21 and b.b.0.0/22 The /24 is obviously going to b...

Can you help me with the configuration of 2 routers with BGP, Are 2 routers in different places, united by 2 links in parallel. A peer bgp to each provider, the idea is that it can synchronize the publication of networks / 24 and maintain backup. Is it possible to have a / 24 network published by a...

@ZeroByte, hello Can you help me with the configuration of 2 routers with BGP, Are 2 routers in different places, united by 2 links in parallel. A peer bgp to each provider, the idea is that it can synchronize the publication of networks / 24 and maintain backup. Is it possible to have a / 24 networ...

Hello,
I currently have 2 peers, one with each provider, I want to separate in 2 CCR, one CCR for each provider.
Both CCRs will be separated by a wireless link, Should I do an iBGP between them to keep the fail over?

Regards

Just updated whole my pppoe site to 6.39.2, you can forget about change-mss rules, it all is now nicely build-in into ppp interfaces, even with MRU now it works fine. Is not the following rule necessary? /ip firewall mangle add action=change-mss chain=forward new-mss=clamp-to-pmtu passthrough=yes \...

When this is so efficient then it is may interesting to transparent for the users to use a different screen to input this. Since short we have the RAW option that should be more efficient but is not that much of a difference. So a user could enter this in the RAW section and an added "action&q...

Hello, you can change the value. Bucket-Size pppoe connections with profile or radius?

Hi all,

after updating the version 6.34, two CCR1036. The table shows ARP own and external IP addresses with MAC address 00:00:00:00:00:00.

It is a bug?

is it 6.31? or 6.30.4? I have try to understand the new order- without any success :-| so what is the working for now? Thanks , This all depends on what features you need. Right now, I have three sets that I tend to use and i'm moving more and more towards the latest bugfix releases as they seem to...

Hello, what is the most stable version so far? for use with CCR PPPoe server and BGP.

Thank you!

Please how it works auto MTU function by pppoe?

Thank you very much!

To test this right. In my case I use a management software that works with mikrotik API.

I will see how to do in case you want to leave the two routers simultaneously.

Try to get another CCR and divide the sessions. It is very unfortunate that 36 Core device cannot hold even 1000 PPPoE sessions properly. I hope they do something about it in the future. Thank you very much for your reply. to divide the traffic would have to pass the secrets to a radius server. I k...

Hello Buy a CCR1036, to improve my network, in theory, I have problems from the implementation with PPPOE connections. I have approx 1200 PPPoE connections for some reason, cut or otherwise electric start more than 50 connections simultaneously, the router becomes unstable, to the point of falling a...

Solved for now. As I got solution on trzepak.pl (here even no one answer), I applied keepalive-timeout off and keep care to there be no encryption on pppoe session. For now sessions keep up few days without any problems. Hello, your customers have Ubiquiti? I have disconnection problems with versio...

for upload you use regular load balancing methods like PCC

Thank you very much!

It can make a more advanced implementation of BGP? is there any documentation on how to use the filters for routes?

http://wiki.mikrotik.com/wiki/Manual:Simple_BGP_Multihoming Hello, thank you very much for your reply. I implemented that way, but only upload traffic goes through one of the ISPs. Input filters should always discard all? /routing filter add chain=isp1-in action=discard add chain=isp2-in action=dis...

This is because both routes are received from different BGP instances. Best path algorithm is used only when routes are received from the same instance. hello, I have 2 suppliers and would like to configure the bgp so work with fail over, I have my ASN and my IP blocks. Where I can find documentati...

Hello Normis,

when you will be available to download the version 6.2?

Regards,

The queues dissapear after a short period of time from queue list and if try to added again i take this error message "couldn't add new simple queue-already have such name"

Same here on RB493

Same here on CCR1036
only appear if the server restarts

Hello, I appreciate it, I can help, I have pppoe on my network server and dhcp server, in the configuration I have MTU in 1480, and change the MSS 1400, 1410 and in every case I have problems with hotmail and yahoo page. That way I can find the correct value of the setting of the MSS.
Thank you.

hello, recently implemented the use pppoe in the same network I have dhcp, pppoe to activate the change-mss my router, RB1100, left with almost 100% cpu load on, implement a single rule for global change the mss, this affects customers as the pppoe dhcp, the question is whether this can cause my net...

Hi, I have a similar problem with my rb1100, with / profile tool. DNS is a load of up to 70% at times. This causes a few days ago the rb1100 is blocking and the only way to recover was by netinstall. 5.rc5 use version.