Yes, minus 25% ethernet MAC overhead.no one gives an opionion?
A switch chip at 100mb of 5 ports, whouls do 5x100 FD of switched traffic, or not?
What are normal conditions?you can go with either of them, nstreme and nv2 is going to be faster than vanilla 802.11, and if you are using only RouterOS wifi clients, that is good option to choose.
the fastest of all three would be NV2 in normal conditions.
YesHi,
Do I need to uprgrade CPE as well as AP to increase nv2 stability ?
Best Regards
Would Equal Cost Multipath still work with fastpath? If so I could use it to distribute traffic to multiple firewall/mangle boxes for higher throughput.If your router is acting purely as a router and nothing else.
That's too bad...I could use SFQ with smaller allot values for queues that handle small packets like VoIP, DNS, most ack, etc.AFAIK for SFQ 'allot' >= 'interface MTU', but this is not mentioned in Wiki.
Try to Google about this.
HTH,
There were no change log entries regarding queuing so I assume it's the same. However, since you asked I did test SFQ on a different device running v5.20 with the same result.What about 5.20 ?
http://bit.ly/UEMNXNI would like to buy one. Anyone have stock here in the US?
Supposedly class 2 sd cards are recommended.help...
The TILE64 cpu itself costs $650...I'm still curious about the pricing.
I'm interested. This would be great for old apartment buildings!We are looking into the PLC techology. Keep us updated with any other requests you might have
I don't know what to do now, admit it that I was way off or edit the wikipedia2.6.36According to wikipedia TILE64 architecture is supported starting from 3.6.36 kernel.
Thanks, that works quite well.Enable SSH service on MikroTik, SFTP clients are: WinSCP, FileZilla...great, how can you use sftp with mikrotik?
Regards,
great, how can you use sftp with mikrotik?Than you can use sftpftp is insecurefor this job use ftp server.
ftp active connections are less secure than httphow is HTTP more secure than FTP ?
ftp is insecurefor this job use ftp server.
Aren't you missing a closing single quotation mark here?$API->write('=numbers=*;
It's 4x Atheros PCIe Ethernet, consumer grade, controllers connected to PCIe switch chip:RB44Ge is just 4x Atheros PCI chipsets with a PCI to PCIe bridge chip
Its a feature of Winbox not ROS.Thanks for your response, but you miss understand. When the color change to redthere must be a bit set somewhere in a registry and i want to get the status of this and use this in a script76% - 100% available traffic used - red
Turn off snmp.Hi all
i have 100% CPU on usermanager in profile how to solved this issue please help!!
Thanks
Was it intentional for the updated brochure not to list nand storage capacity? It seems that many who purchased the revised RB1100AH did not expect it to be only 41.7MBProduct was replaced by a new one, brochure was updated because of it.
Does that mean I can access CCQ, noise floor, etc via SNMP now?"snmp - provide extended interface statistics when availabe"
I like your idea. Speaking of torch, please add a connection/packet mark filters.Please add src/dst address list support to torch. It can be useful to see what is going to oversea traffic for example.
You can use http rewrite to send only logins to https server:I don't think PHPBB supports this.
To expand, maybe array format (like [find] returns) would probably work good, of course this would mean re-writing current scripts that use the ping command's current output (only successful ping count).
What does that mean? What priority? For how long will the new stream be guaranteed .25 of the rate?Now as soon as new stream activates it will get 1/4th of rate with highest priority. If rate is "0" sub-stream will not have this feature (as 1/4th of "0" is "0")
What does that mean?*) fixed pcq queue type;
What is simple queue showing?Attaching the queue trees on global-total is now working. I can't see bytes and packets counting up.
add action=reject chain=forward comment="Drop traffic between LAN interfaces" disabled=no \
dst-address-list=PrivateSubnets in-interface=!ether2-WAN reject-with=icmp-admin-prohibited
Does that mean that routerboards will now work with USB adapters, like NETGEAR WNA1100?AR9271:
The Atheros AR9271 single-chip USB solution provides enhanced Wi-Fi performance and value for home gateways, set-top boxes, gaming consoles, printers and a variety of other embedded wireless products