Community discussions

MikroTik App

Search found 8 matches

by Darsys
Fri Nov 13, 2009 4:44 pm
Forum: General
Topic: L2TP and ipsec overkill
Replies: 3
Views: 665

Re: L2TP and ipsec overkill

I used L2TP because I was uncertain how to connect using ipsec behind another router and with a dynamic ip. To be honest I have not really used ipsec as a tunnel before so I am not knowledgeable about that functionality of it.

So the authentication of the L2TP is not encrypted?
by Darsys
Fri Nov 13, 2009 3:13 am
Forum: General
Topic: L2TP and ipsec overkill
Replies: 3
Views: 665

L2TP and ipsec overkill

I have used mt532 to setup a vpn for a client. The setup looks like this. SecuredClient (ATM) - MT532 - DSL Modem/Router - Internet - Mikrotik PC Based (MTPC) Router I have setup a L2TP connection between the MT532 and MTPC. I run an EOIP Tunnel using the ip's of the L2TP endpoints. The EOIP is brid...
by Darsys
Thu Feb 22, 2007 3:59 pm
Forum: Wireless Networking
Topic: Good signal poor quality (ccq)
Replies: 6
Views: 2531

Nstreme is enabled on the link.. best fit

I turned off one of the hoppers last night and did not affect the problem. Swapping ALL equipment on the other end today.
by Darsys
Thu Feb 22, 2007 3:59 am
Forum: Wireless Networking
Topic: Good signal poor quality (ccq)
Replies: 6
Views: 2531

No real change with antenna. Please ANY input would be appreciated!
by Darsys
Tue Feb 20, 2007 6:56 pm
Forum: Wireless Networking
Topic: Good signal poor quality (ccq)
Replies: 6
Views: 2531

I have reduces power at both end showing a linear change at the other. Quality does not change significantly. I replaced radio on one end which made problem worse (dont really see that at significant) but so was the signal. Swapping antennas at least at one end today. Could the fact this is a pc be ...
by Darsys
Mon Feb 12, 2007 5:35 pm
Forum: Wireless Networking
Topic: Good signal poor quality (ccq)
Replies: 6
Views: 2531

fyi one end is a 500 mhz pc and the other is a mt532
by Darsys
Mon Feb 12, 2007 5:33 pm
Forum: Wireless Networking
Topic: Good signal poor quality (ccq)
Replies: 6
Views: 2531

Good signal poor quality (ccq)

I have a ptp link using sr5's and 3' solid parabolics. I have good signal strengths and good los (clear fresnal). The link has very adequate signal for its purpose but I am having lots of quality issues with the link. There are some sources of external interferance I know. One is an alvarion 5.8vl a...
by Darsys
Fri Dec 23, 2005 7:38 am
Forum: General
Topic: rc4 - wireless interface disappearing
Replies: 24
Views: 9850

I have seen this problem with a rb532 and the Atheros AR5212 chipset mini-pci card. The link is actually not in use at all (will be shortly if I can eliminate the issue) but so far after a couple of days with the link up (again no real traffic) the interface is gone. It was running 2.9.5 I upgraded ...