Disable 'transparent-proxy' for the HotSpot users in HotSpot user profile configuration. Try once again, provide us with configuration for the routing. Both of them do not work correctly or one of the user is able to acess the Internet ? already disable transparent proxy but still stay the same her...
Need help on setup Hotspot with 2 connection from my ISP
I want to route user1 to Gw1 and route user2 to GW2.
I already succeed this configuration without Installing Hotspot.
But after installing hotspot all user can not go in
Anyone can assist ?
Hii.... I am using MT 2.9.6 using this rule but client can open more than 5 connections per Ip address. /ip firewall filter add chain=forward protocol=tcp tcp-flags=syn connection-limit=4,24 action=drop here my config local : 192.168.168.200 netmask : 255.255.255.0 public : 10.97.20.200 netmask : 25...
How to setup Hotspot on MT 2.9.6
already go to IP service but there was no hotspot port ?
in prev version of M, I was set www port = 8080 and hotspot port=80
but in this ver 2.9.6 no hotspot port
pls asisst ..
thanks the_time for the reply, queue simple add target-addresses=22.214.171.124/32 limit-at=200000 max-limit=200000 [/quote] Iam using MT 2.7.14 and there was an error "no such argument(target-address) queue simple add target-addresses=10.97.20.98/32 limit-at=200000 max-limit=200000 or maybe MT 2.7.14 is n...
I already limited the bandwidth for all network 10.97.0.0 so all IP address got the same bandwidth queue simple > add name=down interface=local limit-at=64000 max-limit=6400 queue simple > add name=up interface=public limit-at=64000 max-limit=6400 and now I want to limit it per Ip address with a dif...
if I block all IP addr on the top then I accept specify Ip address the sytem become block all IP and can not connect any other idea ? btw how to block or accept for the rang IP address I want block/accept? for example: block address 10.97.20.50/32 - 10.97.20.90/32 or may be there is the simple way ?
thanks larmaid and all,
now its works, but may be there is a better way ?
I was thingking, mmhhh how about if there are so many user, 100 users do i have on one by one to block them ??
how the correct syntact --> block all and then allow user that we want to give them access ?
Hi..All, Need help, I already install and seting MT with DNS, Gateway correctly and now all user on our network can connect to internet. any body can assist me step by step to restrict user by IP/Mac address? My configuration asf : INTERNET | | Mikrotik ether0 192.168.0.100 ether1 10.97.20.100 -> Cl...