MikroTik

tevolo

Are there issues with DHCP Server not working after an upgrade like 6.34.4? We never heard back on that post and now the post is locked. Mikrotik support has ignored my emails for over a week on the issue we noticed with 6.34.4 and I'm wondering why. https://forum.mikrotik.com/viewtopic.php?f=21&...

tevolo

We have experienced many issues with 6.43.4 and losing the DHCP server functionality. We recently upgraded 20 CCRs from 6.38/6.38.1 and on 4 of the routers, DHCP server doesn't work. Eventually the router slows down too and cannot make a Supout.rif file. The DHCP server is shown in the config file, ...

tevolo

We have around 200 CCR routers on our network and we prefer to upgrade the Routers, however, that process comes with hesitation due to failures occurring often during the process. We never have seen this many issues until our network grew with more CCR routers (Tile version) vs mipsbe or x86 routers...

tevolo

Any upcoming routers that will support QSFP+?

tevolo

According to Mikrotik, there is some kind of bug (I'll call it a bug, but maybe they refer to it differently): "This is a combination of a software and hardware problems. You can assume that you are plugging in and unplugging USB cable countless times per second which causes problems and since ...

tevolo

We have many cloud core routers on the network and we have them installed with IPV6 package and the UPS package. Each router has a Tripp Lite UPS plugged in via a micro USB cable which allows us to monitor the UPS for power outages. I'm not sure where the issue is occurring or if it's related to the...

tevolo

Interesting. I'd like to try that. Do you have an example script by chance?

tevolo

Maybe. I think the only issue with Queue Tree is that you lose statistics per connection, and it makes troubleshooting more difficult when dealing with customers.

tevolo

Using the 1009 CCR and 1036 CCR routers, we're seeing very high CPU usage in processing simple queues when they use a parent. I'd like to say that I haven't seen this happen before in earlier versions of Router OS before the Bucket size was introduced, but in reading it looks like Bucket size was al...

tevolo

We’re seeing issues with transmitting upwards of 500mbps to clients on a CCR1009 router. My uplinks have 900+mbps available, so no issue with the source of bandwidth. But if I enable Parent queues and apply the customer speed package via dhcp lease to 600mbps (for example), the max I can download is...

tevolo

There are many benefits to using a hotspot and client routers, but I won't list them all. Mostly we want to have one system to manage any type of installation (wifi hotspot or ethernet hotspot). PPP is great, but adds a learning curve and extra support so I'm unsure if we'll use that. Also, if someo...

tevolo

We've tested a few routers so far and some work (older Netgear, newer Asus), and some do not work since they need to detect an internet connection first (newer belkin and newer netgear). I watched the Mikrotik IP Connections while the Belkin went through the setup wizard, and it tries to ping and ch...

tevolo

Will Hotspot always work in an Ethernet setup (Ethernet to the Client) if the client plugs in their own router? We tested this a little bit and it looks like it works with most routers, but some newer routers try to check the internet connection in order to establish a connection during a setup wiza...

tevolo

Anyone run into an issue where Dude (on Windows XP) doesn't export configuration/backup? I click on Export and it acts like it will backup and eventually clears out the configuration and then reopens (Getting Stuff) and shows everything like normal. I'm worried because Dude failed once and I had to ...

tevolo

It would be a better feature if you can tie Mac addresses to User Profiles instead of the Mac Address login since you lose features and abilities. When you manage a hotspot with 100's of users by username, and each of them have 5-8 wifi devices, and 1-2 devices without a browser, it becomes very dif...

tevolo

I'd like to learn more about the Mac Cookie. I read the wiki, but it seems like the feature may lack some key abilities. Can you use Mac-Cookie to manually add a Mac address of a TV, Xbox, PS3, Roku, etc. into the User Profile like a binding so that the Mac always ties to the User Profile? It would ...

tevolo

Works perfectly. Thanks.

tevolo

I'm sure this is an easy one, but I'm looking for a script to run every hour to locate any devices in the Hosts that are idle for more than 8 hours and remove them. We can't just use idle-timeout since there are other devices in the host list like IP Bindings. Any ideas or anyone using a script now?...

tevolo

Thanks for the reply, but I tried it under System > Scripts and ran it a few times, but nothing changes in the hosts file.
I'm not very familiar with scripting, but I'm still researching off of your example and a few others. If you have any other suggestions please let me know. Thanks.

tevolo

Any ideas on this? Any help would be great. Thanks.

tevolo

I'm sure this is an easy one, but I'm looking for a scrip to run every hour to locate any devices in the Hosts that are idle for more than 8 hours and remove them. We can't just use idle-timeout since there are other devices in the host list like IP Bindings.
Thanks.

tevolo

So can that be used in unison with a username and password?
Or better question, can I have 4 different 'callingstationid' sent from Radius to the router and if the end user computer is using one of the 4, that device is allowed access?

tevolo

Is there a Radius Attribute that we can use on our Radius server to authenticate by MAC in combination with Username/Password? Just like using a Hotspot with username and password and setting up an IP Binding for something like a Wii or Roku, but have that binding information come from our Radius Se...

tevolo

I'd like to reopen this thread and check on any development to allow the injection of a toolbar for advertising or notifications, etc.

Normis?

tevolo

Did you ever get it working? We use the DMA RM solution and Mikrotik too. Have you checked the following: 1. Radius setup correctly using correct ports, IP Address, and Secret, and you have it setup for the Hotspot service? Does it work for the accounts you added manually? 2. Hotspot server setup, a...

tevolo

PPP should definitely be the route you want to go. Simple queues work fine, but alternatively you can use Mangle and create a queue tree based on the Mangle rules, but if you're looking for a simple solution right now, you should use PPP and Simple Queues.

tevolo

It may be a hack but this what we do for Trial scenarios: 1. Create a button or link for users to receive a Trial on your hotspot login page. 2. Have the link go to and outside webhost to a contact page collecting Email, Name, etc. (Just make sure your host is in the walled garden for them to access...

tevolo

Thanks for the reply, but that's not quite what we are looking for due to the many limitations of the ISS6000 and the fact that it needs to be setup everywhere you have a router which is alot of places since we operate at many apartments, each which has a router. We would rather everything to be man...

tevolo

That is exactly what I was looking for. Thanks.

tevolo

Does anybody know of a software, or a good way to manage a router from the browser with limited functionality. We have some hotspots and we need to protect them from a Tier 1 support technician from making mistakes like deleting profiles or even the hotspot itself. We're looking to give them basic f...

tevolo

Having just as many PCQ rules and Mangle rules is probably more CPU dependent than just having Simple Queue handle the bandwidth for the accounts. We actually have been using this solution for the past year and have had great success! While it is tedious to setup, once it is implemented, it has been...

tevolo

I'm currently looking for a better and more automated system to handle AAA and Radius for Hotspot-like systems. I know there are plenty of solutions out there, but it seems difficult to find one that can do "everything" and make my life easier. We currently use Radius Manager which I know ...

tevolo

FYI - this was fixed by using WDS on the Ubiquiti M5's. Once that was enabled, the MAC was transparent to the router.

tevolo

We have a large wifi network and a problem troubleshooting the network since the router is only seeing the MAC addresses of the bridges and not the end users laptops. Example: 2 Unifi APs in one building, connect to a Mikrotik RB250GS (acting only as a switch), an M5 connected to the switch to link ...

tevolo

I simply want to block it by the MAC address per the caller-id or the username they are trying to authenticate with if anybody has a clue how to do this? Block either the MAC: 00:E9:0A:91:52:D1 or user Versace so it doesn't hit the router 30000 a day? 2012.02.22-14:50:48 <172.16.50.1>: pppoe,ppp,inf...

tevolo

Anybody have further developments and ideas on this? Anyway to simplify the process?

tevolo

Let's say your an ISP deploying Wifi in a High-Rise Building. 300 Units, 25 Floors, 12 Units Per Floor. You decide to deploy 2 APs per floor using . Realistically if all 300 units used the wifi, you would have 6 units using 1 AP. 1. If you used a MT 411 and Wireless N card in the 20Mhz spectrum, wh...

tevolo

How does that make sense that you can receive 60-70mbps throughput, but your laptop stutters with video. Is that actual throughput or the data rate your laptop connects to the wifi? If you had even 10mbps of actual throughput of wifi, you wouldn't have videos stutter even when viewing a 1080p video ...

tevolo

Let's say your an ISP deploying Wifi in a High-Rise Building. 300 Units, 25 Floors, 12 Units Per Floor. You decide to deploy 2 APs per floor using . Realistically if all 300 units used the wifi, you would have 6 units using 1 AP. 1. If you used a MT 411 and Wireless N card in the 20Mhz spectrum, wha...

tevolo

I'm still trying to evaluate the issue and figure out if it was isolated to one laptop (virus or computer issue), or if it occurred for several users.

tevolo

Is there a solution to the SSL problem? I'm on version 5.9 and clients have trouble accessing any https websites over the hotspot. Is there a solution for this problem?

tevolo

See here:
http://forum.mikrotik.com/viewtopic.php ... 01#p322701

tevolo

Guys, I've been looking for a solution as well, and I have created one, but I'd like to take it further so it is not so tedious. I use a Radius Server, but I'm sure it can be done with User Manager and I plan to test soon since I'm looking for a better solution. Here we go: 1. I have all my user acc...

tevolo

I've been trying to setup a chart to monitor bandwidth usage for each Queue Tree we have, and I finally was able to create this by finding the correct OID using SNMPWalk. Once I added the Data Source for each OID, I noticed the data it was charting was incorrect. Using a Scale of 1, showed the data ...

tevolo

Does anybody have a solution if the gateway is your local modem, and although it is on and working, the cable company cut the internet for some reason, so it could ping the gateway but has no internet? Instead of a ping check on the gateway, is there a way to ping some internet source like a DNS ser...

tevolo

Weeks later, we finally updated our Radius Server (Radius Manager), and now they support Custom Radius Attributes per user account. We now can apply the Session Timeout and a Redirect page in order to force users to a certain webpage for Advertising or our Terms and Conditions which they need to agr...

tevolo

1. Under DHCP Client, Remove (uncheck) Default Route for each DHCP WAN connection. (Just make note what the actual Default Route is for each WAN Connection under IP Route first). 2. Setup your own default route for each connection under IP Route. /ip route add gateway=192.168.1.1 check-gateway=ping ...

tevolo

insert into radreply (UserName,Attribute,Value) values ('username','Mikrotik-Group','managers'); That's what I'm looking for :) :D . However, with Radius Manager by DMASoftlab, which is built on FreeRadius and what we are using, that context didn't work, so I checked the Radius log on the Mikrotik ...

tevolo

Can somebody show me and example of a Radius Attribute to be used with Mikrotik and Freeradius? Maybe more specifically to apply a Radius Attribute to a user account so they inherit a specific hotspot user profile?
Thanks

tevolo

Unfortunately after speaking with HP about our 1810G procurve, this is not possibe. There has to be a PPP setting to block calls based on a MAC address right? If not, there should be something implemented that could allow it the same way you can deny wifi connections in Mikrotik based on MAC in the ...

tevolo

Seems like these forum posts relate to this question, but nobody has received an answer. http://forum.mikrotik.com/viewtopic.php?f=2&t=57272&p=292954&hilit=block+pppoe+user#p292954 http://forum.mikrotik.com/viewtopic.php?f=2&t=25239&hilit=block+pppoe+user Would a firewall rule bl...

tevolo

Our logs are going crazy with a few different attempts to login to the PPP service via radius, but radius denies because their PPP account is wrong. In our case, this is probably somebody with our modem that set it up wrong. The problem is that I can only seem to track it via MAC address. I want to ...

tevolo

I found that what I was asking is not possible.

I've changed the setup so we just have two parent queues of 100mbit and 50mbit, and packet marking so that I could place subscribers for certain speeds into each queue. Client speeds are controlled with PCQs.

I'll post details later. Thanks.

tevolo

Anybody have any configuration examples for this? The big question is: If I have two buckets, 50M and 100M, and I have two types of users, 8M and 16M, how can I have all 8M users use the 100M bucket for bandwidth, and all 16M users, user their first 8meg from the 100M bucket, and then borrow additio...

tevolo

Ran from a brand new Quad Core Computer (i7-2700k). Only used 5% of my CPU on the computer - 100% on the router. Receive TCP max 550mbps Send TCP max 120mbps Receive UDP max 950mbps Send UDP max 120mbps Send/Receive TCP and UDP max 80mbps Looks good except I thought the Full Duplex test would be muc...

tevolo

Nobody said that this Hardware is capable to run at this speed. It has just Gbit interface, but it is not able to handle data at this speed.

I guess I was expecting more out of the RB1100AH and Gigabit Interfaces.

tevolo

If I only test Receive on TCP, it can only get to 150Mbps. Whenever I have tested bandwidth on a 100mbps connection, I usually get about 90-95mbps. How come I can't get to gigabit speeds(or close at 900mbps) on Gigabit interfaces?

tevolo

I have two routers connected to each other via a CAT6 cable.
Router A is 1100AH, Router B is a 450G. The link between the two is a full-duplex 1Gbps connection.

How come I can only get ~60Mbps of full-duplex speed on the bandwidth test?

tevolo

Anyone have insight on how to setup the following: Internet Connection: 150 mbit split into a 100mbit and 50mbit queue User: PPPoE User has a 12mbit connection. 8mbit needs to be pulled from the 100mbit queue, and if they use the remaining 4 mbit, it needs to be used from the 50mbit queue. This way ...

tevolo

I tried PPPoE with using Payment Reminders, but I agree with your old posts http://forum.mikrotik.com/viewtopic.php?f=2&t=46080 that say it is not ideal. Hotspot is the most ideal setup for the scenario, but since every user will have a modem that I want to be the form of authentication, I had t...

tevolo

I think I'm close to a viable solution, but can you comment on the following: Is there a simple way to setup an Access Code to use the hotspot service (or PPPoE if I went that route), but still have the Hotspot connection come from the modem? For example, since I enabled a Mac Auth Password, the hot...

tevolo

Completely agree with PPPoE over Hotspot. The only reason I turned to hotspot was to potentially setup a login or ToS agreement, but if that won't work, I may go back to PPPoE. Also, I didn't want people to have to know or remember their PPPoE account. Is there an easier way to setup the Redirect to...

tevolo

I'll test it and try a few different things to see about the Session Timeout. Yes, the Modem (CPE) is the only authenticated device based on the MAC address. Our Radius server is setup with the Mac address as the user account and will never expire. The hotspot is setup for Mac Auth only, BUT the end...

tevolo

We have Radius Manager which is limited in what it can do but does a decent job. Since our Radius server is only authenticating a Mac address on a modem that is always on, would the session-timeout work on the User Profile on the hotspot? The idle time for the Mac Hotspot user never surpasses 1 minu...

tevolo

-Every MAC has a user account on the Radius side, and that account session is set to expire in 99 years so that way their account is always active. -We use Radius to easily keep track of the person's name or address with the account, the CPE they have, and the service they chose, and also to upgrade...

tevolo

I'm struggling to find an answer to redirect Mac Auth Hotspot users to a webpage. WE have an outside Radius Server and a Mikrotik router with Hotspot setup for Mac Auth only. All users have a CPE device with unlimited internet access since their accounts never expire and are authenticated based on t...

tevolo

Got it working, but I'm not sure where the problem occurred. I disabled PPPoE server on the router and it began to work. I did have the router setup to server PPPoE originally and used the same CPE with the router over PPPoE. Maybe it held onto an ARP entry and wouldn't allow the same device to logi...

tevolo

I am trying to setup Mac Authentication setup on Hotspot using our Radius server. I've setup standard HTTP authentiucation and tested it and it works great logging in through the hotspot login page and uses our radius server no problem. If I change the Hotspot authentication to just MAC authenticati...

tevolo

Also, I understand that there are alot of theoretical articles out there in regards to this type setup, but I'd like to hear from somebody that actually are using this type of setup, with what equipment (for the wireless bridges), and how well is it working or how fast of a duplex connection can you...

tevolo

I'm trying to plan the best possible method for creating a full duplex wireless link using 802.11N with a full duplex speed up to 100mbps. Mikrotik has some newer equipment that has been released lately which I think helps create a better full duplex link using OSPF ( http://wiki.mikrotik.com/wiki/O...

tevolo

Stupid question but how do I connect to a Mikrotik 411AH using a USB to Serial like this: http://www.walmart.com/ip/StarTech.com-ICUSB232-USB-to-Serial-Adapter-Cable/13215732?sourceid=1500000000000003142050 ? Obviously the male connector won't link with the male connector on the router, so do I need...

tevolo

Ping - Yes. Traceroute - Reaches the router. Firewall - I'm not 100% sure it is correct, but I have a dstNAT rule to accept ports 2210-2211. For the firewall rule, you don't need to have dstNAT right? Since the DUDE is setup on the actual router itself with the Public IP. How should it be setup to a...

tevolo

Did you figure out the problem for your issue?
I have the same problem and cannot connect to my RB493G running Dude 3.6, and Dude 4Beta3 on my windows machine.

Looking for any positive help out there.
Thanks.

tevolo

What was the result of your question?
Did you figure it out and how? Thanks.

tevolo

Any ideas? Would the above work?
Thanks.

tevolo

Unfortunately I don't have the proper testing equipment and scenarios to truly put the router to test, so I have review the scenario and then give it a try in a dual wan environment. Are the rest of the settings correct to have a true load balanced router with two WAN connections? What if I added lo...

tevolo

I think I just screwed up those marks when adding it to the forum. Basically it follows the Wiki step by step though I thought that article was confusing with so many different routing and connection marks. Here is actual output from the router. /ip firewall mangle add action=mark-connection chain=i...

tevolo

I tried to follow the PCC Load Balancing seen here: http://wiki.mikrotik.com/wiki/Manual:PCC . The end setup worked for a little and wasn't really load balancing the connection, and it would disconnect local users from the internet every 15 minutes or so. Anything missing in the configuration? My se...

tevolo

Any idea why one of the WAN connections would stop responding to Ping all of a sudden? I haven't make any changes to the setup which has been working great for a long time now, but a few days ago, one of the WAN IPs stopped responding to pings. The gateway address responds to ping, but not the stati...

tevolo

If you still have question with this check out this post:
http://forum.mikrotik.com/viewtopic.php?f=2&t=43469

I have a similar setup as you and it works great for me.

tevolo

I have an RB800 router with two WAN connections shared with 4 WLAN connections. The two connections are balanced based on LAN IP. At random, one of the WAN IPs will no longer respond to Ping and therefore DUDE shows the router is down. What would cause the WAN IP to stop responding to pings? I check...

tevolo

Sorry I'm just responding to this now, but I'm not familiar enough with Radius to be able to make changes like that. We have a 3rd party software and I only configure it within it's available abilities. I wish the software had more abilities but it still does a good job. I just wanted to make a sugg...

tevolo

I wish I was able to tie a few MAC addresses to a certain user account in Radius but it's just not an option right now. I was hoping and thinking it would be a good idea for Mikrotik for a future release to add to the overall manageability over the hotspot. Allowing a MAC to simply bypass is nice, b...

tevolo

Is there an option (or can there be in future builds), to bind a username/password to a MAC address and IP for a hotspot? We have a 3rd party radius server for our hotspot. All users have a username and password to login to the service. I would like to be able to bind certain user's mac addresses to...

tevolo

You can use the Ubiquiti XR9.

http://www.titanwirelessonline.com/Mikr ... kt-900.htm

tevolo

I guess the last part of this setup would be, how can I monitor it and make sure both routes are being used efficiently? When I check clients on the hotspot, some people are connected to the 192.168.4.0/24 network and some are connected 192.168.3.0/24 which shows me they have access and should be us...

tevolo

I think it is working much better now: IP Firewall: /ip firewall connection tracking set enabled=yes generic-timeout=10m icmp-timeout=10s tcp-close-timeout=10s \ tcp-close-wait-timeout=10s tcp-established-timeout=1d \ tcp-fin-wait-timeout=10s tcp-last-ack-timeout=10s \ tcp-syn-received-timeout=5s tc...

tevolo

Fewi would you take a look at my setup here and let me know if this is correct: Background: 2 WAN connections total on ether 3 and ether 2. Hotspot on bridge and bridge2 (both bridges have two wireless adapters for clients to connect to - bridge1 for wlan1 and wlan2, bridge2 for wlan3 and wlan4). br...

tevolo

Thank you.
I'll try it out.

tevolo

Fewi, thanks for the old forum post, I was looking for that. I'll give it a try. But also, an approach I may want to do with my setup, is have two separate hotspots, and each hotspot uses a separate internet connection. hotspot A goes out of WAN1 and Hotspot B goes out WAN2 Would that be possible an...

tevolo

Can anyone help with why there is a problem with my load balancing when I implement a hotspot: My Setup: Ether2 (WAN): IP: 10.10.10.70/30 Gateway: 10.10.10.69 Ether3 (WAN2): IP: 10.10.10.80/30 Gateway: 10.10.10.79 Bridge (all 4 WLAN connections are in the bridge)(Local network): IP: 192.168.1.254/24...

tevolo

Could anybody explain a bit further with my detailed setup above.
Overall the system only has one gateway but I want to separate a subnet of LAN IPs out one Public IP, and do the same for another subnet.
Is that possible?

tevolo

Would that work with the following setup: Ether1 connected to Gateway (10.1.1.1), receives Public IP: 10.1.1.2 Ether2 connected to Gateway (10.1.1.1), receives Public IP: 10.1.1.3 DHCP Server enabled on WLAN1 (192.168.1.1/24), Range is 192.168.1.1 - 192.168.1.254 DHCP Server enabled on WLAN2 (192.16...

tevolo

Could anyone explain how to setup routes and firewall rules to have a set of lan devices use one route to reach the outside world by that IP. To explain: I have one gateway with many Public IPs, and an RB800 attached to Gateway. Ether1 (IP: 10.1.1.1) and Ether2 (IP: 10.5.1.1) are receiving public IP...

tevolo

Lol!
Well, when you buy one and immediately mount it to the enclosure, it becomes difficult to find it

Good to know. Thanks!

tevolo

Anyone assist me with how I can install a compact flash card in the RB800 with the 816 daughterboard connected as well? Do i need a special adapter like a mini pci-e to compact flash adapter? (http://www.sourcingmap.com/compact-card-mini-pcie-adapter-for-asus-eeepc-p-39959.html?utm_source=google&...

tevolo

dboillot, Can you post your final and working configuration?
I've been gathering some information lately to do the same thing as you by load balancing 4 Cable Internet connections on an RB800.

Any help would be great, Thanks.

tevolo

How can I monitor a router that has no public IP, but only an internal IP coming from another Mikrotik Router? For example: I have the Main router with Public IP(1.1.1.1) and internal IP(192.168.0.1), and connected via a wireless wds link, I have Second router with internal IP(192.168.0.2). I can ac...

tevolo

I just wanted to re-open this thread to check on whether some development has been started to support injecting HTML?
Thanks

edit: it appears that Meraki does exactly this. RouterOS will support injecting of HTML sometime in the future.

tevolo

Yes, that is what I was looking for, but will it work if the external login page doesn't use the code the original login page uses in the login form and javascript: Here is the hotspot login code: $(if chap-id) <form name="sendin" action="$(link-login-only)" method="post&quo...

tevolo

We use RouterOS Hotspot service with an externally located Radius server. Right now users have to login through the hotspot login page to access the internet, and if they haven't paid for service, then they have to go to our radius server website to login (with the same hotspot credentials) and purc...

tevolo

Test package allows to make payment and other options, reports and sign-up are missing only in test usermanager.

Sorry to bother, but are there any expected timetables for when the test package will become stable.
User Sign-up is very important, when will that function work?

tevolo

I recently updated to user-manager 4.4 expecting to see some of the new functions in the Test package, but noticed that it is still the same as the old 3.X version. When will the beta/test package become stable? Or is the test package now able to accept payments and do pretty much everything userman...

tevolo

I read through that forum which was somewhat helpful, but I guess the bigger question I have would be: What is the best way to handle QOS and priorities when you are selling different bandwidth packages? The Radius Server would handle all bandwidth allocations, but I want to ensure the routers do th...

tevolo

I want to setup a hotspot using my Radius server which sells different types of Internet Service, and then based on that service you would be assigned a certain IP and be placed in a certain PCQ queue. This would be done with multiple routers managed by one router connected to the Internet. Is it po...

tevolo

Sorry to re-open the post, but is the following true: "From my experience on these boxes, you can only have one enabled port on a bridge. If you want to use these boxes as a router, you will need to use a route/masquerade from wlan1 to ether1 rather than a bridge." In many cases I have rou...

tevolo

I got it working using a transparent bridge, which seems to be an appropriate setup the situation.
http://wiki.mikrotik.com/wiki/Transpare ... o_Networks

Is using a transparent bridge the best approach for this setup (Point to Multi-point)?

tevolo

It's not a mid-rise building. It's an apartment complex with about 6 buildings spread out over 1 square kilometer. All buildings are brick and close together so it's necessary to have separate routers spread out throughout the complex as long as all secondary routers have an LOS to the primary route...

tevolo

This setup will be used for a small apartment community with several different buildings, therefore there will be one Internet connection, connected to the main router via ether1. -The internet connection must be shared with wlan1 at 5.8ghz which connects to other routers in the complex -The interne...

tevolo

What is the best method for a simple point to multi-point network with two wireless cards and one ether. Gateway-router: Ether1 is gateway connection Wlan1 - 5.8ghz to connect to other routers Wlan2 - 2.4ghz for clients to connect Secondary Routers: Wlan1 - 5.8ghz to connect with main router for cli...

tevolo

Awesome. I think it will be beneficial for Mikrotik!

tevolo

Is there any script or setting to create a toolbar for every connected user that would populate on the top of their browser just like any other toolbar in IE or Firefox? I want to add a toolbar with links so that connected clients could easily, logout, add credits, connect to support, and maybe even...

tevolo

So I finally got the hotspot working where users, created in the user manager, can login through the hotspot. I'm still trying to figure out how to allow users to create their own profiles and pay for internet access like a true hotspot - all automated. Also, existing hotspot users cannot login to t...

tevolo

1. I'm a noob 2. I'm testing Mikrotik and RouterOS because it seems awesome and full of excellent features. 3. I'm using the latest release with usermanager 4. I've read a ton of posts and wikis but seem to be confused still so I'm looking for some help. I have a RB411 MikroPoynt device. Ether1 plug...

Search found 114 matches