Community discussions

MUM Europe 2020

Search found 146 matches

by amsteen
Tue Jun 27, 2017 8:15 pm
Forum: Beginner Basics
Topic: How calculate total internet usage for each user
Replies: 6
Views: 1155

Re: How calculate total internet usage for each user

This will not work with me as there no one connected to physical interfaces.
All my users are connected over WiFi only.
And as I tell before simple queues works but only over one day.
by amsteen
Tue Jun 27, 2017 5:47 pm
Forum: Beginner Basics
Topic: How calculate total internet usage for each user
Replies: 6
Views: 1155

Re: How calculate total internet usage for each user

I see this page before but I do not want to use any other program. Also it do not Gove what I want I try simple queue for each user it is good but only for one day then reset the total usage.
I need simple method.
by amsteen
Tue Jun 27, 2017 5:09 pm
Forum: Beginner Basics
Topic: How calculate total internet usage for each user
Replies: 6
Views: 1155

How calculate total internet usage for each user

I have RB951G and I use DHCP with leases for static IP's

I need to calculate total internet usage for each user per month ( in GB ).

Note: my router may be restared due to power goes off.

Please help
by amsteen
Tue May 10, 2016 9:24 am
Forum: General
Topic: Can mikrotik work as Cascaded Proxy
Replies: 9
Views: 1185

Re: Can mikrotik work as Cascaded Proxy

Mr. ZeroByte

Thanks for your concern
Ok I will Try, but which Route I should add as a gateway as I do not have one
And What is the NAT rule I should Add.

Thanks Again
by amsteen
Mon May 09, 2016 2:01 pm
Forum: General
Topic: Can mikrotik work as Cascaded Proxy
Replies: 9
Views: 1185

Re: Can mikrotik work as Cascaded Proxy

Any news ???
by amsteen
Wed May 04, 2016 8:48 am
Forum: General
Topic: Can mikrotik work as Cascaded Proxy
Replies: 9
Views: 1185

Re: Can mikrotik work as Cascaded Proxy

In fact I found an article on mikrotik wiki on that issue and I try it in
Many ways But I fail.

All this articles depends on that there is a gateway with the proxy but I do not
Have a gateway, it is a proxy only.

So I need help from some one who try this situation.

Thanks in advance
by amsteen
Mon May 02, 2016 8:14 am
Forum: General
Topic: Can mikrotik work as Cascaded Proxy
Replies: 9
Views: 1185

Re: Can mikrotik work as Cascaded Proxy

Ok Fine

Can you help in my situation ??

Or send me setting of your working machine ..
by amsteen
Sun May 01, 2016 9:40 am
Forum: General
Topic: Can mikrotik work as Cascaded Proxy
Replies: 9
Views: 1185

Re: Can mikrotik work as Cascaded Proxy

Hi All

Is IT possible Or not ??

Do Any one try this situation Before ??
by amsteen
Wed Apr 27, 2016 9:06 am
Forum: General
Topic: Can mikrotik work as Cascaded Proxy
Replies: 9
Views: 1185

Can mikrotik work as Cascaded Proxy

Hi All [attachment=0]cloud.jpg[/attachment] Our ISP gives us only proxy server without any gateways. They give us this proxy server : 172.30.7.211 Port : 808 When I try it on one computer it works. I try also with CCPROXY software and it works and deliver internet to clients. I need to deliver inter...
by amsteen
Sun Feb 14, 2016 9:12 pm
Forum: General
Topic: How To use Mikrotik with proxy server
Replies: 0
Views: 316

How To use Mikrotik with proxy server

Hi All I have mikrotik 6.28 server and it was working good but our isp Changes his setting and give us a proxy server with port Instead of direct gateway. So I need to change mikrotik setting to use these ISP Proxy settings My Mikrotik setting is very simple as one wan interface One lan interface ga...
by amsteen
Thu Jan 21, 2016 8:33 am
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 290
Views: 311407

Re: Tool: Realtime per IP traffic monitor for home/office

Dear All

IT works with me fine bu I need to reset the track on daily usage
I set this setting in the SnifferService.ini file:

ClearSchedule=Daily

And how to reset it manually

But It do not work so please help
by amsteen
Tue Jan 19, 2016 8:33 am
Forum: Scripting
Topic: What is wrong with this Script ????
Replies: 14
Views: 1947

Re: What is wrong with this Script ????

Thanks you very much
by amsteen
Mon Jan 18, 2016 7:50 am
Forum: Scripting
Topic: What is wrong with this Script ????
Replies: 14
Views: 1947

Re: What is wrong with this Script ????

Yes It Works perfect
Many thanks to all of you and this respective forum
by amsteen
Sun Jan 17, 2016 12:44 pm
Forum: Scripting
Topic: What is wrong with this Script ????
Replies: 14
Views: 1947

Re: What is wrong with this Script ????

Mr. BartoszP


I need another thing, I need a script to change all my simple queues
max-limit to unlimited so I do this one but not working :

:for i from=1 to= 300 do={
/queue simple set number="$i" max-limit=0/0
}

can you check it
by amsteen
Sun Jan 17, 2016 10:56 am
Forum: Scripting
Topic: What is wrong with this Script ????
Replies: 14
Views: 1947

Re: What is wrong with this Script ????

I get it IT was not the script it was the queue type it should be Default. In Mikrotik 6.28 When you create a simple queue it makes its Default type --- Default-Small. When I change the type to Default the Script work very well, and I think the first script will work also. Thank you very much for yo...
by amsteen
Sun Jan 17, 2016 8:45 am
Forum: Scripting
Topic: What is wrong with this Script ????
Replies: 14
Views: 1947

Re: What is wrong with this Script ????

I try also not working I think the problem is the total-bytes when
I try ---- /queue simple> get number=0 value-name=total-bytes from
the terminal it show nothing and from browser I consumed about 100MB

Also in the queue status there no traffic check this photo :
by amsteen
Sat Jan 16, 2016 8:46 am
Forum: Scripting
Topic: What is wrong with this Script ????
Replies: 14
Views: 1947

Re: What is wrong with this Script ????

I do this yesterday but no way it is not working, check photo I do one trail I replace the > sign with < and add manually a simple queue With the IP the I am testing from it 192.168.100.50 and it works and changes the queue speed But without any traffic ( this is to check script errors ). Sorry to d...
by amsteen
Fri Jan 15, 2016 2:51 pm
Forum: Scripting
Topic: What is wrong with this Script ????
Replies: 14
Views: 1947

Re: What is wrong with this Script ????

This the photo for my schedule is this ok ??
by amsteen
Fri Jan 15, 2016 2:44 pm
Forum: Scripting
Topic: What is wrong with this Script ????
Replies: 14
Views: 1947

Re: What is wrong with this Script ????

I Try your script but it is not working also I am testing from a pc with ip 192.168.100.50 by download and youtube and brwosing is this ok ?? Do I have to make simple queue for all the IP's in network 192.168.100.0/24 Or the script will create a simple queue for the ip it get ??? By the way my netwo...
by amsteen
Thu Jan 14, 2016 7:54 pm
Forum: Scripting
Topic: What is wrong with this Script ????
Replies: 14
Views: 1947

What is wrong with this Script ????

I get this script from a friend : :local traf; /queue simple { :for i from=1 to= 254 do = { :if ([/queue simple find target-addresses=("192.168.100." . $i)] != "") do={ :set traf [get [find target-addresses=("192.168.100." . $i)] total-bytes] :if ($traf > 5242880) do = { set [find target-addresses=(...
by amsteen
Thu Jan 14, 2016 5:58 pm
Forum: Scripting
Topic: How to limit a user to a given amount of traffic?
Replies: 85
Views: 79044

Re: How to limit a user to a given amount of traffic?

Dear All Is this subject is closed or not as I try this on my server but I fail any help.. My Server settings: /ip address add address=192.168.100.1/24 interface=Mangers network=192.168.100.0 add address=192.168.1.50/24 interface=External network=192.168.1.0 /ip dns set allow-remote-requests=yes ser...
by amsteen
Thu Jan 14, 2016 5:55 pm
Forum: Scripting
Topic: I need script -fair usage policy-
Replies: 4
Views: 1779

Re: I need script -fair usage policy-

In Fact I am doing it now manually by making a simple queue for any IP with any speed I want I want and it works well. But I have to check the all IP traffic manually all the time and this is a very bad work. I found this article: http://forum.mikrotik.com/viewtopic.php?f=9&start=50&t=308 this same ...
by amsteen
Thu Jan 14, 2016 12:18 pm
Forum: Scripting
Topic: I need script -fair usage policy-
Replies: 4
Views: 1779

Re: I need script -fair usage policy-

First Of all thanks for your response
But I think the script should check local int for local IP's not wan
I try it but it do not work

I hope you can help
by amsteen
Wed Jan 13, 2016 8:14 pm
Forum: Scripting
Topic: I need script -fair usage policy-
Replies: 4
Views: 1779

I need script -fair usage policy-

I have mikrotik 6.28 server with simple configuration : /ip address add address=192.168.100.1/24 interface=Mangers network=192.168.100.0 add address=192.168.1.50/24 interface=External network=192.168.1.0 /ip dns set allow-remote-requests=yes servers=208.67.222.222,208.67.220.220 /ip firewall nat add...
by amsteen
Tue Jan 05, 2016 1:03 pm
Forum: General
Topic: Tool: Realtime per IP traffic monitor for home/office
Replies: 290
Views: 311407

Re: Tool: Realtime per IP traffic monitor for home/office

Dear all I am new here and I try many times but not working here is my situation: 1. Mikrotik server 6.19 2. I try blink and it works fine and I get my mikrotik command prompt. 3. The sniffer Services starts well but its log file shows the error: 2016/01/05 13:50:49 - Error: Cannot get traffic: http...
by amsteen
Mon Dec 31, 2012 9:48 pm
Forum: Beginner Basics
Topic: How To use Parent Proxy
Replies: 1
Views: 617

How To use Parent Proxy

I have mikrotik server which take INTERNET from a proxy server
I understand that parent proxy is used for this so I try it
But I failed

Is there is another way or any article or Example about parent proxy ??
by amsteen
Sun Dec 30, 2012 8:39 pm
Forum: Beginner Basics
Topic: how to run mikrotik from proxy server ???
Replies: 5
Views: 2075

Re: how to run mikrotik from proxy server ???

No way it is not working
Any other idea
by amsteen
Sun Dec 30, 2012 7:37 am
Forum: Beginner Basics
Topic: how to run mikrotik from proxy server ???
Replies: 5
Views: 2075

Re: how to run mikrotik from proxy server ???

Thanks for your help but I try and it is not working this is my rules: /ip firewall nat add action=masquerade chain=srcnat comment="" disabled=no out-interface=\ !Internal add action=redirect chain=dstnat comment="" disabled=no dst-port=80 \ in-interface=External protocol=tcp to-ports=8080 add actio...
by amsteen
Sat Dec 29, 2012 10:26 pm
Forum: Beginner Basics
Topic: how to run mikrotik from proxy server ???
Replies: 5
Views: 2075

Re: how to run mikrotik from proxy server ???

If my mikrotik working settings helps I can send it here !!!!!
by amsteen
Sat Dec 29, 2012 12:55 pm
Forum: Beginner Basics
Topic: how to run mikrotik from proxy server ???
Replies: 5
Views: 2075

how to run mikrotik from proxy server ???

I have mikrotik Ver 4.16 operating on one pc and it works good for 1 year. It was working from a DSL router. My router ip for wan card was 172.30.7.208/24 My router ip was 172.30.7.225 reachable external Now Our new ISP give us internet from cable with proxy server 192.168.11.200 And port is 8080 Wh...
by amsteen
Sat Oct 29, 2011 8:26 am
Forum: Beginner Basics
Topic: stop redirect traffic destined for rapidshare.com
Replies: 4
Views: 1059

Re: stop redirect traffic destined for rapidshare.com

I read this page before and I use these rules in my server but notice that
you can use redirect only with denied option, this means if the traffic matches rapidshare.com
I can deny then redirect the traffic to other site.
In fact I need to redirect the traffic to another router on matching
by amsteen
Sat Oct 29, 2011 8:11 am
Forum: Beginner Basics
Topic: bypass a local site
Replies: 5
Views: 1406

Re: bypass a local site

Thanks Mr. JJOliver998 for your replay but the link you send is invalid,
If you have simple rule for DNS routing please help.

Thanks
by amsteen
Wed Oct 26, 2011 8:04 am
Forum: Beginner Basics
Topic: stop redirect traffic destined for rapidshare.com
Replies: 4
Views: 1059

Re: stop redirect traffic destined for rapidshare.com

I am using a proxy full time, So how can I do that ????
by amsteen
Tue Oct 25, 2011 1:21 pm
Forum: Beginner Basics
Topic: stop redirect traffic destined for rapidshare.com
Replies: 4
Views: 1059

stop redirect traffic destined for rapidshare.com

How to stop redirect traffic destined for rapidshare.com to the proxy.
by amsteen
Tue Oct 25, 2011 12:19 pm
Forum: Beginner Basics
Topic: bypass a local site
Replies: 5
Views: 1406

bypass a local site

I have mikrotik O.S working, and all users using mikrotik proxy server in their browsers. I have a local site in my network but I can not run it with proxy in browser. If I remove proxy from my browser the local site works fine. I try to use "bypass proxy server for local address" in IE but it is no...
by amsteen
Tue May 10, 2011 8:03 am
Forum: Beginner Basics
Topic: How Block Hotspot Shield program ????
Replies: 3
Views: 2391

Re: How Block Hotspot Shield program ????

Please Help
by amsteen
Sun May 08, 2011 2:02 pm
Forum: Beginner Basics
Topic: How Block Hotspot Shield program ????
Replies: 3
Views: 2391

Re: How Block Hotspot Shield program ????

How to Detect and Block Hotspot Shield program traffic(openvpn application) Some companies and organizations has its own security policy , sometimes they use OPENDNS addresses in order to prevent users in these companies and organization from accessing certain web sites .But there are many PROXY and...
by amsteen
Sun May 08, 2011 1:59 pm
Forum: Beginner Basics
Topic: How Block Hotspot Shield program ????
Replies: 3
Views: 2391

How Block Hotspot Shield program ????

Hi every one I need to block Hotspot Shield program from mikrotik I found this page on wiki http://wiki.mikrotik.com/wiki/How_to_Detect_and_Block_Hotspot_Shield_program_traffic(openvpn_application) But I have Mikrotik 4.16 so when I try it it did not work as they say that in page "it work for mikrot...
by amsteen
Wed Mar 16, 2011 9:52 pm
Forum: Beginner Basics
Topic: mikrotik with cisco vlan
Replies: 1
Views: 488

mikrotik with cisco vlan

hi every one I have mikrotik server ver 4.2 and it was working good on my cisco network at work place. We recently change our cisco switches to have 3 VLAN and the mikrotik is connected to one of them, every thing is working well except firewall rolls. For Example I have 5 roles that block INTERNET ...
by amsteen
Sat Dec 25, 2010 10:38 am
Forum: Beginner Basics
Topic: Problem with PCC code
Replies: 0
Views: 429

Problem with PCC code

I have two internet lines first line 172.30.7.216/22 second line 172.30.7.209/22 first gateway 172.30.7.224 second gateway 172.30.7.225 Local 192.168.1.10/24 and I apply the following code to use both of them on one server -----------------------------CODE--------------------------------------------...
by amsteen
Wed Dec 15, 2010 7:49 am
Forum: Beginner Basics
Topic: stop using another proxy server
Replies: 9
Views: 6187

Re: stop using another proxy server

Thanks for every one who respond to my case.

But the problem is that if I drop one proxy server ( say 1.1.1.1 ) today,
Tomorrow he will find another one and use it.

I need a code to prevent using any external proxy server ?
by amsteen
Tue Dec 14, 2010 11:12 am
Forum: Beginner Basics
Topic: stop using another proxy server
Replies: 9
Views: 6187

Re: stop using another proxy server

I check the url you send but there is nothing about external proxy ????
by amsteen
Tue Dec 14, 2010 10:45 am
Forum: Beginner Basics
Topic: stop using another proxy server
Replies: 9
Views: 6187

Re: stop using another proxy server

Sorry how to block it from firewall ( I need the role )
by amsteen
Tue Dec 14, 2010 10:11 am
Forum: Beginner Basics
Topic: stop using another proxy server
Replies: 9
Views: 6187

stop using another proxy server

Hi
I have a mikrotik server 4.11 it work with webproxy and my users
works without using proxy server.

some of my users uses an external proxy server so they bypass
my download and sites filters.

How to prevent my users from using another proxy server ?????
by amsteen
Thu Nov 11, 2010 3:59 pm
Forum: Beginner Basics
Topic: help needed with IP's
Replies: 11
Views: 1490

Re: help needed with IP's

yes I want that as it work good for me before
by amsteen
Wed Nov 10, 2010 8:46 pm
Forum: Beginner Basics
Topic: help needed with IP's
Replies: 11
Views: 1490

Re: help needed with IP's

this is the ip route on the new isp

/ip route
add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=\
87.101.225.129 scope=30 target-scope=10
by amsteen
Wed Nov 10, 2010 1:15 pm
Forum: Beginner Basics
Topic: help needed with IP's
Replies: 11
Views: 1490

Re: help needed with IP's

attached again with zip file
by amsteen
Wed Nov 10, 2010 12:36 pm
Forum: Beginner Basics
Topic: help needed with IP's
Replies: 11
Views: 1490

Re: help needed with IP's

Of course I change the old addresses to new one.
And you can see that in my first attachment
by amsteen
Wed Nov 10, 2010 8:59 am
Forum: Beginner Basics
Topic: help needed with IP's
Replies: 11
Views: 1490

Re: help needed with IP's

These are my old and new IP'S ----------OLD ISP Was Working good--------- /ip address add address=192.168.0.200/24 broadcast=192.168.0.255 comment="" disabled=no \ interface=Internal network=192.168.0.0 add address=192.168.1.10/24 broadcast=192.168.1.255 comment="" disabled=no \ interface=External n...
by amsteen
Tue Nov 09, 2010 9:55 pm
Forum: Beginner Basics
Topic: help needed with IP's
Replies: 11
Views: 1490

help needed with IP's

Hi every one, I have mikrotik server ver 4.11 and it was working good but we change our I.S.P Our new I.S.P give us his new ip's which are : ip: 87.101.225.132/29 gw: 87.101.225.129 dns: 87.101.238.5,87.101.238.6 I try this ip's direct on my pc and the INTERNET work perfect but when I put them on mi...
by amsteen
Sat May 22, 2010 10:33 am
Forum: Beginner Basics
Topic: adding ip-vpn to mikrotik
Replies: 4
Views: 897

Re: adding ip-vpn to mikrotik

I try policy routing But it is not what I need. policy routing routes a subnet to specific router. I need to route depending on user request - for example if user browse local address ( like 172.30.16.200 ) it direct him to router 1 and if he browse the wan address it direct him to router 2 Thanks t...
by amsteen
Tue May 11, 2010 7:57 am
Forum: Beginner Basics
Topic: adding ip-vpn to mikrotik
Replies: 4
Views: 897

Re: adding ip-vpn to mikrotik

Strange No one try to help?

May I ask in wrong way? Then I will try to ask in another way ...

My question is :

I want to route the requests for specific IP ( http://172.16.100.202 -- web server )
to another gateway than the one we use for INTERNET?

How to do that?
by amsteen
Sun May 09, 2010 9:57 am
Forum: Beginner Basics
Topic: adding ip-vpn to mikrotik
Replies: 4
Views: 897

Re: adding ip-vpn to mikrotik

Hi every one

Is it possible or not
by amsteen
Sat May 08, 2010 10:27 am
Forum: Beginner Basics
Topic: adding ip-vpn to mikrotik
Replies: 4
Views: 897

adding ip-vpn to mikrotik

I have mikrotik server 4.6 and it work good with web proxy its ip is 172.30.4.1 Now I have another application wep server working by IP-VPN on another gateway which is 172.30.7.254 and they are on the same network. My problem is that if the user want to use application server he should use the gatew...
by amsteen
Wed Apr 14, 2010 8:05 am
Forum: Beginner Basics
Topic: hotspot shield
Replies: 9
Views: 2445

Re: hotspot shield

Thanks Mr. Megateq But I do not want to use Mikrotik Hotspot and
user manager as I have a lot of users and they are working without
Login
by amsteen
Tue Apr 13, 2010 1:04 pm
Forum: Beginner Basics
Topic: hotspot shield
Replies: 9
Views: 2445

Re: hotspot shield

There should be some one know how to stop hotspot shield

I was having ISA server before 2 years and it was stop it, so Mikrotik
Should do also

I hope that ..... ????
by amsteen
Mon Apr 12, 2010 11:12 am
Forum: Beginner Basics
Topic: hotspot shield
Replies: 9
Views: 2445

Re: hotspot shield

Thanks Mr. roadracer96 but please tell ( as am biginner ) from where to start ?

I do not know how to capture a packet of using hotspotshield
From where you get this "CA plaintext information"
by amsteen
Sun Apr 11, 2010 8:11 am
Forum: Beginner Basics
Topic: hotspot shield
Replies: 9
Views: 2445

Re: hotspot shield

Hi every one

My problem is that I do not know how to use L7 filter to block
hotspot shield and I know it is possible to do that with L7 filter

So please help
by amsteen
Sat Apr 10, 2010 8:49 am
Forum: Beginner Basics
Topic: hotspot shield
Replies: 9
Views: 2445

Re: hotspot shield

Do you Have any thing about it ?

Did any one know how to do this with L7 Filter ?

Please help
by amsteen
Wed Apr 07, 2010 1:36 pm
Forum: Beginner Basics
Topic: hotspot shield
Replies: 9
Views: 2445

hotspot shield

Hi everyone I have mikrotik Ver 4.6 Licensed and I use web proxy to control
users access to INTERNET.

some of my users uses hotspot shield to have open link without any limitations to
INTERNET, I need to block hotspot shield?

Please help
by amsteen
Sat Dec 26, 2009 1:43 pm
Forum: Beginner Basics
Topic: Is it possible VPN server ?
Replies: 14
Views: 4355

Re: Is it possible VPN server ?

First of all thanks to Mr. cvelee You are such a nice guy; your instruction is very simple and effective When I try to connect to Mk it verifies the user and pass word ok then "Registering your computer on the network" then give an error 720 One thing My Wan IP on MK. Is 172.30.7.208 My Local IP on ...
by amsteen
Tue Dec 22, 2009 7:01 am
Forum: Beginner Basics
Topic: Is it possible VPN server ?
Replies: 14
Views: 4355

Re: Is it possible VPN server ?

I was not expect such that replay from the this board. In fact I am certified from CCNA and MCSA and have experience In networking for 19 years. I work as network administrator for 15 years. I am 42 years OLD. In my working place I build Exchange 2007 Servers and VPN servers with windows 2003 server...
by amsteen
Mon Dec 21, 2009 6:57 am
Forum: Beginner Basics
Topic: Is it possible VPN server ?
Replies: 14
Views: 4355

Re: Is it possible VPN server ?

I do not try any thing as I do not know how to do VPN

But I take pervios code from the manual direct but it not working
by amsteen
Mon Dec 14, 2009 7:50 am
Forum: Beginner Basics
Topic: Is it possible VPN server ?
Replies: 14
Views: 4355

Re: Is it possible VPN server ?

my local interface name is "Internal" I try these setting /interface bridge add name=bridge_local protocol-mode=rstp /interface bridge port add bridge=Internal interface=ether1_local /interface bridge set bridge_local admin-mac=00:0C:29:C3:46:5E //// where xx:xx:xx:xx:xx:xx is MAC address of the eth...
by amsteen
Mon Dec 14, 2009 7:12 am
Forum: Beginner Basics
Topic: Is it possible VPN server ?
Replies: 14
Views: 4355

Re: Is it possible VPN server ?

Ok I have checked this manual before but I was thinking that you have another
Setting.
My issue is different from this as they are working on VPN between two MIKROTIK
Routers, and I do not have MIKROTIK router, but I have only one MIKROTIK server 3.22

Any suggestions
by amsteen
Sun Dec 13, 2009 7:16 pm
Forum: Beginner Basics
Topic: Is it possible VPN server ?
Replies: 14
Views: 4355

Re: Is it possible VPN server ?

Yes I have a public IP address on my Mikrotik

can you send my link for example or steps for this

Thanks
by amsteen
Sun Dec 13, 2009 10:37 am
Forum: Beginner Basics
Topic: Is it possible VPN server ?
Replies: 14
Views: 4355

Is it possible VPN server ?

Is it possible to setup MK O.S-3.2 Server as VPN server

Like this picture
1.png


I mean Clients have to connect to the MK server from internet and browse the
Local network.
If so please write some instructions.
by amsteen
Tue Dec 08, 2009 7:30 am
Forum: Beginner Basics
Topic: redirect website using nat
Replies: 3
Views: 1808

Re: redirect website using nat

OK This is my Settings Tota.jpg /ip address add address=172.30.7.209/24 broadcast=172.30.7.255 comment="" disabled=no \ interface=ISPONE network=172.30.7.0 add address=220.200.200.12/24 broadcast=220.200.200.255 comment="" disabled=\ no interface=ISPTWO network=220.200.200.0 add address=172.30.6.1/2...
by amsteen
Tue Dec 08, 2009 6:55 am
Forum: Beginner Basics
Topic: mangle rule
Replies: 23
Views: 3226

Re: mangle rule

Ok I use an open DNS
208.67.222.222
208.67.220.220

and it work now, but still need to block sites and some file extensions (download) from
Firewall as I disable Web-proxy now, so do you have any idea how to do this.


I appreciate you help very much
by amsteen
Tue Dec 08, 2009 6:48 am
Forum: Beginner Basics
Topic: redirect website using nat
Replies: 3
Views: 1808

Re: redirect website using nat

Yes it work with me with web proxy before, but my configuration prevent me from
using web proxy as I have 2 ISP in my MK so I use some mangle rules which are impossible to run with web-proxy enabled
by amsteen
Mon Dec 07, 2009 12:24 pm
Forum: Beginner Basics
Topic: redirect website using nat
Replies: 3
Views: 1808

redirect website using nat

need a nat rule to redirect website to another one
for example redirect www.google.com to www.cnn.com

I do not use webproxy on my MK.OS 3.22

I try to do this from DNS with

/ ip dns static
add name="www.google.com" address=216.36.51.233 ttl=1d


but it do not work
by amsteen
Mon Dec 07, 2009 7:20 am
Forum: Beginner Basics
Topic: mangle rule
Replies: 23
Views: 3226

Re: mangle rule

The Problem is that I need to add 4 DNS I have Two ISP and each one has primary-DNS and secondary-DNS I try to add the primary DNS for the first ISP as primary and the primary DNS For the second ISP as secondary but the first ISP work and the second no Another thing I was block sites and some file e...
by amsteen
Sun Dec 06, 2009 11:14 am
Forum: Beginner Basics
Topic: mangle rule
Replies: 23
Views: 3226

Re: mangle rule

Ok Mr. butche Every thing works with me fine like your example but I use differnt ip's and some little changes in Natting as follows: /ip route add gateway=220.200.200.1 routing-mark=ISP2 add gateway=172.30.7.225 routing-mark=ISP1 add gateway=172.30.7.225 /ip route rule add dst-address=192.168.0.0/2...
by amsteen
Sat Dec 05, 2009 9:24 pm
Forum: Beginner Basics
Topic: mangle rule
Replies: 23
Views: 3226

Re: mangle rule

I try many times before to run MK with webproxy disabled but I fail
is there is some way to run MK without webproxy?
the attached file contains all my MK. settings
please check if you have some time
by amsteen
Sat Dec 05, 2009 12:10 pm
Forum: Beginner Basics
Topic: mangle rule
Replies: 23
Views: 3226

Re: mangle rule

Ok I Turn off web proxy and the nat rules that redirect traffic to the web proxy but it is not working ( this never work with me before even with one DSL line ). If you have a copy of backup file or settings file for the machine that you try your example on it please send it. my email is am.steen@gm...
by amsteen
Sat Dec 05, 2009 11:26 am
Forum: Beginner Basics
Topic: mangle rule
Replies: 23
Views: 3226

Re: mangle rule

I try to made the setting as that in the PCC example. but the MK3.22 is accept these two rules add chain=prerouting dst-address-type=!local in-interface=Local per-connection-classifier=both-addresses:2/0 \ action=mark-connection new-connection-mark=wlan1_conn passthrough=yes add chain=prerouting dst...
by amsteen
Sat Dec 05, 2009 10:03 am
Forum: Beginner Basics
Topic: mangle rule
Replies: 23
Views: 3226

Re: mangle rule

Mr Butch Evans I am very sorry for disturbance But, I was thinking that the required nat rules is special for this matter. I add that nat rules but still not working the new nats are /ip firewall nat add action=masquerade chain=srcnat comment="" disabled=no out-interface=ISPONE add action=masquerade...
by amsteen
Sat Dec 05, 2009 7:28 am
Forum: Beginner Basics
Topic: mangle rule
Replies: 23
Views: 3226

Re: mangle rule

Thank Mr. Butch Evans

Can you help me with nat rules as I do not know how to nat traffic that leaves
the router ( I have MK 3.22 Not MK router ) on ISPONE and ISPTWO interfaces

And about the ISP router the static routes from where to where
by amsteen
Fri Dec 04, 2009 10:00 pm
Forum: Beginner Basics
Topic: mangle rule
Replies: 23
Views: 3226

Re: mangle rule

Yes I adjust the ISP gateways (these routers are in my site and I can change there IP's as I want)
as 10.10.11.1 and 10.10.10.1
2.jpg
I have two DSL lines connected to two routers ( cisco - linksys ), these routers are in my site
so I can change thier IP's as I want

Thanks
by amsteen
Fri Dec 04, 2009 6:06 pm
Forum: Beginner Basics
Topic: mangle rule
Replies: 23
Views: 3226

Re: mangle rule

I forget to tell you that in the two subnet
192.168.0.0/24 and 192.168.1.0/24
INTERNET is not working
by amsteen
Thu Dec 03, 2009 9:11 pm
Forum: Beginner Basics
Topic: mangle rule
Replies: 23
Views: 3226

Re: mangle rule

great thanks to Mr. fewi and Mr.butche the site you give is great 1.jpg I made all the address as in the example exactly but not work these are the codes /interface ethernet set 0 arp=enabled auto-negotiation=yes cable-settings=default comment="" \ disable-running-check=yes disabled=no full-duplex=y...
by amsteen
Tue Dec 01, 2009 8:03 pm
Forum: Beginner Basics
Topic: mangle rule
Replies: 23
Views: 3226

Re: mangle rule

first thanks for your replay In fact I have two DSL lines with two routers one is cisco and the other is speed linksys The out line from cisco router ( 172.30.7.225 ) is connected to the wan card of MK. server and the lan card of the MK is connected to network switch to provide INTERNET to 60 client...
by amsteen
Tue Dec 01, 2009 7:02 pm
Forum: Beginner Basics
Topic: mangle rule
Replies: 23
Views: 3226

Re: mangle rule

A lot of people read my message but no one try to help

Is there are an error in my message

Why ?
by amsteen
Mon Nov 30, 2009 11:14 am
Forum: Beginner Basics
Topic: mangle rule
Replies: 23
Views: 3226

mangle rule

I need a mangle rule to add two routes for two DSL lines with different gateways
to be delivered to two ip ranges

I have two external NIC cards and one internal card

I have router OS Ver 3.22 on HP P4 machine

Please help
by amsteen
Sun Nov 22, 2009 12:49 pm
Forum: Beginner Basics
Topic: Is it poosible to have 2 route list ?
Replies: 5
Views: 785

Re: Is it poosible to have 2 route list ?

Ok I add you

My Email is am_steen@hotmail.com

Thanks
by amsteen
Wed Nov 18, 2009 1:11 pm
Forum: Beginner Basics
Topic: Is it poosible to have 2 route list ?
Replies: 5
Views: 785

Re: Is it poosible to have 2 route list ?

I forget to tell you that each Line has its DNS
this means we also have 2 different DNS
by amsteen
Wed Nov 18, 2009 9:13 am
Forum: Beginner Basics
Topic: Is it poosible to have 2 route list ?
Replies: 5
Views: 785

Re: Is it poosible to have 2 route list ?

Thanks Mr. pastranini I add the addtional nic card and connect the second line, but I do not know how to use the mangle in order to select the gateway for each line. The first wan NIC address 172.30.7.208 and its gateway 172.30.7.225 with out to lan NIC address 172.30.4.1 The Second wan NIC address ...
by amsteen
Tue Nov 17, 2009 7:14 am
Forum: Beginner Basics
Topic: Is it poosible to have 2 route list ?
Replies: 5
Views: 785

Is it poosible to have 2 route list ?

Hi every one Is it possible to have 2 route lists? I have two DSL lines one of them connected to speed touch router and from that router To MK OS. V3.22 server and MK deliver Internet to a group of 300 users. The other line deliver internet from Cisco router to 100 users direct. Is it possible to co...
by amsteen
Mon Nov 16, 2009 12:56 pm
Forum: Beginner Basics
Topic: argent --- mikrotik to cisco ?
Replies: 4
Views: 623

Re: argent --- mikrotik to cisco ?

Thanks very much I solve the problem and for others who get the same problem here is some details for my problem and solution I have cisco DSL router 1841 from the router one out line connected to one interface of MK Server ( normal pc ) 3.22 the other interface of the MK is connected to my network ...
by amsteen
Sun Nov 15, 2009 12:29 pm
Forum: Beginner Basics
Topic: argent --- mikrotik to cisco ?
Replies: 4
Views: 623

Re: argent --- mikrotik to cisco ?

First off all thanks very much as no one care except you I try to run my MK on Another router works in another department the internet work very well from it. And when I try my router whitch connected to MK by connect it direct to my pc it work vey good. my router is cisco 1841 this means the router...
by amsteen
Sat Nov 14, 2009 9:37 pm
Forum: Beginner Basics
Topic: argent --- mikrotik to cisco ?
Replies: 4
Views: 623

argent --- mikrotik to cisco ?

I have MK OS 3.22 connected to cisco 1841 router, they was working very good from 3 months.
from 4 days the server stops and the router also, when I disable Internal interface of the MK
the router work again, and when I enable it the router hung

Please help very argent

by amsteen
Sat Nov 14, 2009 11:54 am
Forum: Beginner Basics
Topic: My router stop
Replies: 1
Views: 428

My router stop

Hi every one I have MK OS 3.22 it was working very good, but from 4 dayes it stops. I check all the setting and nothing changed. I reformat the server and install it again with out any rules Only ip's and dns and routers, but the same problem. I notice that when I disable the internal interface on M...
by amsteen
Wed Nov 11, 2009 10:44 am
Forum: Beginner Basics
Topic: Remove Mikrotik word from ERROR: Gateway Timeout
Replies: 28
Views: 7537

Re: Remove Mikrotik word from ERROR: Gateway Timeout

IS this work with MK V3.22
by amsteen
Wed Nov 11, 2009 9:08 am
Forum: Beginner Basics
Topic: Cache on MK 3.22
Replies: 0
Views: 579

Cache on MK 3.22

Hi Every One I have MK V3.22 and I setup web-proxy step by step for cache. The web-proxy status now is running, But the cache is not working I down load one file 32Mb then I close the browser I open the browser again and download the same file from the same site, But it download from internet with i...
by amsteen
Sun Nov 08, 2009 10:28 am
Forum: Beginner Basics
Topic: Hard disk size
Replies: 1
Views: 531

Hard disk size

I have mikrotik 3.2 OS installed on 80 GB hard disk

The mikrotik 3.2 OS only map 101 MB of the hard disk so the cash size is limited.

please check the attached picture

any one know how to set the mikrotik 3.2 OS to have the whole hard disk size

Thanks

Eng. Amgad
by amsteen
Sat Nov 07, 2009 9:41 am
Forum: Beginner Basics
Topic: Stopping AnchorFree Hotspot Shield ?
Replies: 1
Views: 1072

Stopping AnchorFree Hotspot Shield ?

I am using web proxy in Mikrotik 3.2 OS to block some sites, but
my clients uses "AnchorFree Hotspot Shield" to access these sites.

Is there is some way to block using "AnchorFree Hotspot Shield" software

Eng. Amgad
by amsteen
Sat Nov 07, 2009 9:37 am
Forum: Beginner Basics
Topic: allow by mac address
Replies: 12
Views: 17986

Re: allow by mac address

A great thanks to Mr. cyph3r

Yes it work

thanks again

Eng. Amgad
by amsteen
Wed Nov 04, 2009 11:11 am
Forum: Beginner Basics
Topic: allow by mac address
Replies: 12
Views: 17986

Re: allow by mac address

There no one know how to deliver internet by mac address
or it is not possible

Please try to help me
by amsteen
Mon Nov 02, 2009 6:09 am
Forum: Beginner Basics
Topic: allow by mac address
Replies: 12
Views: 17986

allow by mac address

Dear Sir's

If we block a pc from internet with web-proxy (with its IP)
is it possible to allow iternet for it by mac address (from firewall filter)

thanks
Eng. Amgad
by amsteen
Sun Nov 01, 2009 9:28 am
Forum: Beginner Basics
Topic: block by Mac address ?
Replies: 5
Views: 1535

Re: block by Mac address ?

A great Thanks For Mr Fewi

your command is work but instead of "prerouting" chain I use "input" chain then it work

it should be like this

/ip firewall filter add chain=input action=drop src-mac-address= aa:bb:cc:dd:ee:ff


Thanks Again

Eng. Amgad
by amsteen
Sun Nov 01, 2009 9:02 am
Forum: Beginner Basics
Topic: block by Mac address ?
Replies: 5
Views: 1535

Re: block by Mac address ?

Thanks Mr Fewi for your concern

I try your command and it is not working, the internet still working on that pc

one notice the ip of that pc is allowed from web proxy is this affect the command

any help

Thanks again
by amsteen
Sat Oct 31, 2009 7:08 am
Forum: Beginner Basics
Topic: block by Mac address ?
Replies: 5
Views: 1535

Re: block by Mac address ?

First thanks for Mr Ibersystems for his concern I have a Mikrotik OS 3.2 It delivers internet to 60 computers, and I have another 10 computers should not have internet, so I want to block them with thier MAC address Or deliver internet to the 60 computer by thier MAC address I am using web proxy rul...
by amsteen
Wed Oct 28, 2009 12:45 pm
Forum: Beginner Basics
Topic: block by Mac address ?
Replies: 5
Views: 1535

block by Mac address ?

Hi
any one know how to block some machines by its mac address,
without using hotspot.

my be from ip--arp

Please advice how to do

Amgad
by amsteen
Wed May 13, 2009 1:02 pm
Forum: General
Topic: stop vpn connection
Replies: 18
Views: 11885

Re: stop vpn connection

Yes tunnel VPN via HTTP can not be stop or I will you block all HTTP

But you know I was working on isa2006 before and it blocks all kind of
VPN by default, so I have to add rules to open what I want.

Thanks for your respond

Eng. Amgad
by amsteen
Wed May 13, 2009 8:49 am
Forum: General
Topic: stop vpn connection
Replies: 18
Views: 11885

Re: stop vpn connection

I try the code and it work but as you say for some kind
Of vpn only.

I wonder if there is some way to stop all the vpn connections with any type.


thanks.

Eng. Amgad
by amsteen
Tue May 12, 2009 9:23 am
Forum: General
Topic: stop vpn connection
Replies: 18
Views: 11885

Re: stop vpn connection

Then from where I can block TCP 1723 and GRE protocols, I do not
care about stop too much stuff.

I am using the web-proxy on my MK server.

Amgad
by amsteen
Sun May 10, 2009 9:53 am
Forum: General
Topic: stop vpn connection
Replies: 18
Views: 11885

Re: stop vpn connection

I mean I have many users in my network connection to vpn throught MK3.23 server.

How to stop them
where is the pptp-client interface

Thanks
Amgad
by amsteen
Sat May 09, 2009 1:03 pm
Forum: General
Topic: stop vpn connection
Replies: 18
Views: 11885

stop vpn connection

Did any one know how to stop the vpn connection on MK 3.23

Amgad
by amsteen
Wed May 06, 2009 10:17 am
Forum: General
Topic: How to prevent hotspot shield
Replies: 7
Views: 2256

Re: How to prevent hotspot shield

Dear Sir
I mean by "hotspot shield" a comany site with this name.

how to stop it from microtik hotspot I never use it before.

amgad
by amsteen
Wed May 06, 2009 9:12 am
Forum: General
Topic: How to prevent hotspot shield
Replies: 7
Views: 2256

Re: How to prevent hotspot shield

Sir

I wonder is there is some way to stop vpn tunnel.

I have to stop vpn tunnel by anyway to hotspot servers.

Amgad
by amsteen
Tue May 05, 2009 2:14 pm
Forum: General
Topic: How to prevent hotspot shield
Replies: 7
Views: 2256

Re: How to prevent hotspot shield

I am not using "Hotspot" in RouterOS, but I use only webproxy rules.

Please give me an example rule based on IP to overcome them.


thanks
amgad
by amsteen
Tue May 05, 2009 1:25 pm
Forum: General
Topic: How to prevent hotspot shield
Replies: 7
Views: 2256

How to prevent hotspot shield

Dear Sir's

My users uses anchorfree software, so they can overcomes any rules
on mikrotik.

Did any ine know how to stop this software.

"hotspot shield - http://anchorfree.com"
I thing it uses port "172.0.0.1:895"
Please help

Amagd
by amsteen
Wed Apr 22, 2009 1:09 pm
Forum: General
Topic: How to calculate cache size
Replies: 0
Views: 387

How to calculate cache size

Dear sir's

I have MK 3.23 on an HP pc with 1 GB memory and 160 GB Hard drive.

I need to calculate the Max. suitable cache size for memory and hard disk.

Please give the size in KiB as on web-proxy setting page.

thanks
Eng. amgad
by amsteen
Wed Apr 22, 2009 1:05 pm
Forum: General
Topic: Limited Hard Disk size
Replies: 6
Views: 683

Re: Limited Hard Disk size

Thank you man

I reinstall with MK 3.23 and I get the full hard drive size.
I restore my Backup and system is working good now.

Thanks again
by amsteen
Wed Apr 22, 2009 10:07 am
Forum: General
Topic: Limited Hard Disk size
Replies: 6
Views: 683

Re: Limited Hard Disk size

Sir

My Old system was MK 3.22, is there is any problem to restore
my old backup on the new MK 3.23 version.

Thanks
Eng. Amgad
by amsteen
Wed Apr 22, 2009 9:28 am
Forum: General
Topic: Limited Hard Disk size
Replies: 6
Views: 683

Re: Limited Hard Disk size

Mr. Normis

Is there is any setting during reinstalling RouterOS to adjest the
correct hard disk size, or it automatic detect it.

I will reinstall with MK3.2 CD.

Thanks
Eng. Amgad
by amsteen
Wed Apr 22, 2009 8:05 am
Forum: General
Topic: Limited Hard Disk size
Replies: 6
Views: 683

Limited Hard Disk size

Sear Sir's My MK3.2 server hard disk is 160GB. I use winbox to admin my server. When I check resources tab Under system, all resources are Ok except hard disk it give my a total size of 101 MB, and free space is 55 MB. My system slow as the cash is limited. My system is installed on HP pc with sata ...
by amsteen
Mon Apr 20, 2009 1:00 pm
Forum: General
Topic: Max No. Of clients
Replies: 2
Views: 514

Max No. Of clients

Dear Sir's

I have a small question.

Is there a relation between license level (3,4,5,6) and the
max. no. of clients.

I am not using hot spot, I only have a firewall rule for 400 users,
than I use web-proxy to control them.

Thanks
Eng. Amgad Steen
by amsteen
Mon Apr 20, 2009 12:33 pm
Forum: General
Topic: Export Setting
Replies: 8
Views: 1375

Re: Export Setting

Mr Normis

I do not know how to thank you.

You solve a great problem for me.

Thanks again

En. Amgad Steen
by amsteen
Mon Apr 20, 2009 11:45 am
Forum: General
Topic: Export Setting
Replies: 8
Views: 1375

Re: Export Setting

I try using Internet explorer, and I found the file anf click on it
I choose to save to my c drive but it give me the login request was denied


Eng. Amgad
by amsteen
Mon Apr 20, 2009 11:27 am
Forum: General
Topic: Export Setting
Replies: 8
Views: 1375

Re: Export Setting

I have FTP server, waht is the code for export to ftp server
Eng. Amgad
by amsteen
Mon Apr 20, 2009 11:16 am
Forum: General
Topic: Export Setting
Replies: 8
Views: 1375

Re: Export Setting

Mr. Normis

thanks for your replay, but this file will be saved on the system drive.
I need to take this file to a save location on another pc.

Thanks

Eng. Amgad
by amsteen
Sat Apr 18, 2009 10:54 am
Forum: General
Topic: Export Setting
Replies: 8
Views: 1375

Export Setting

Dear Sir's Did Any one know how to export MK3 setting to a file, so we can import it again after format. Or How to copy Backup file to another location ( like windows drive ). Also I get am error message when I try backup the MK3 I get " couldn't make backup - action failed (6) " Can any body help m...
by amsteen
Wed Apr 15, 2009 8:23 pm
Forum: General
Topic: Please help with https
Replies: 1
Views: 333

Please help with https

Did any one know how to stop file download in https.

Another Words, how to stop file download from inside email
sites like yahoo or gmail.

Thanks in advance.

Eng.
Amgad Steen
by amsteen
Wed Apr 15, 2009 8:19 pm
Forum: General
Topic: Please Help with MK3 firewall
Replies: 2
Views: 406

Re: Please Help with MK3 firewall

yes It is enabled and running. as when I block sites or download with web-proxy it work. But this happen it I cancel the range. I do it in another way I leave the firewall rules without range, and I add the required range in web-proxy rules and It work for me. Thanks for your response. Eng. Amgad st...
by amsteen
Wed Apr 15, 2009 12:15 am
Forum: General
Topic: Please Help with MK3 firewall
Replies: 2
Views: 406

Please Help with MK3 firewall

Dear Sir's I was unsing MK2.9 firewall with no problems, as follows 1. main rule with address range 172.30.4.20-172.30.4.80 2. rule for redirect port 80 on wan interfaceto port 8080 3. rule for redirect port 80 to port 8080 with out choose any interface this is work very good in the given range. But...
by amsteen
Tue Apr 14, 2009 11:57 am
Forum: General
Topic: block yahoo messenger
Replies: 19
Views: 10787

Re: block yahoo messenger

Mr. Normis

It is ok, But when some one put proxy server in yahoo messenger
it work again.

thanks

Eng. Amgad
by amsteen
Tue Apr 14, 2009 11:40 am
Forum: General
Topic: block yahoo messenger
Replies: 19
Views: 10787

Re: Please Help

yes it is working, and yahoo messenger stops

Thanks again Mr. Normis

Eng. Amgad
by amsteen
Tue Apr 14, 2009 11:27 am
Forum: General
Topic: block yahoo messenger
Replies: 19
Views: 10787

block yahoo messenger

Dear Sir's

I can block msn messenger from fire wall, but I try that for yahoo messenger
With ports 5050,5000-5010,5001 but I fail.
I am using MK ver 3.
Please help me to block yahoo messenger from firewall.

Thanks Eng. Amgad
by amsteen
Tue Apr 14, 2009 10:46 am
Forum: General
Topic: What is wrong with this code
Replies: 5
Views: 614

Re: What is wrong with this code

Thanks Mr. normis

Your link solves my problem.

Thanks agian

Eng. amgad steen
by amsteen
Tue Apr 14, 2009 10:29 am
Forum: General
Topic: Please Help with MK 3
Replies: 1
Views: 314

Please Help with MK 3

Dear Sir's

I have MK ver3, I use web-proxy

I can block file download very good, but I can not
block web site.

And there is no example is manual related to this issue.

How to block sites with MK 3 Web proxy?

Thanks

Eng. Amgad
by amsteen
Tue Apr 14, 2009 10:23 am
Forum: General
Topic: What is wrong with this code
Replies: 5
Views: 614

Re: What is wrong with this code

Can we block it by name I mean www.youtube.com
by amsteen
Mon Apr 13, 2009 1:01 pm
Forum: General
Topic: Access List
Replies: 6
Views: 708

Re: Access List

Ok

Thanks Mr. Chupaka

I will Upgrade my MK ver to 3

Thanks very much

Eng. Amgad steen
by amsteen
Mon Apr 13, 2009 1:00 pm
Forum: General
Topic: What is wrong with this code
Replies: 5
Views: 614

What is wrong with this code

Dir Sir's I get this code for bloking youtube from this forum : 1. add these ip's to a address list.. (this is the ip for youtube site) / ip firewall address-list add list=youtube address=208.65.153.251 comment="" disabled=no add list=youtube address=208.65.153.253 comment="" disabled=no 2. You can ...
by amsteen
Mon Apr 13, 2009 11:42 am
Forum: General
Topic: Access List
Replies: 6
Views: 708

Re: Access List

Yes You are right

I have MK v3 On VMware Machine I try address range on its web proxy
and it accept it.

But is there some way with ver 2.9


Thanks very much
Eng Amgad
by amsteen
Mon Apr 13, 2009 11:13 am
Forum: General
Topic: Access List
Replies: 6
Views: 708

Re: Access List

Thanks Mr. Chupaka for your replay

I try with Web-proxy to but '172.30.4.30-172.30.4.80' In Src. address
But when I apply I get "Error in src. address - network address expected!"
It only accept the format 0.0.0.0/0 this includes all the range.

thanks
Eng. Amgad
by amsteen
Mon Apr 13, 2009 8:02 am
Forum: General
Topic: Can we block sites from firewall
Replies: 2
Views: 532

Can we block sites from firewall

Dir Sir's I have one question: Is there is some way to block web sites or block some files like *.mp3 from downloading , by using firewall. If there is please give me code for this I try this ip firewall filter add action=reject chain=forward comment="" content=.mp3 disabled=no reject-with=icmp-netw...
by amsteen
Sun Apr 12, 2009 8:54 am
Forum: General
Topic: Access List
Replies: 6
Views: 708

Access List

Hi All I wonder What the Access List means, from its name it looks like Groups of address in lists. But if we check it in MK manual (web proxy for example) we find it Talks about one source address for rule and do not accept address range. While in the firewall rules it accepts an address range as s...
by amsteen
Sat Apr 11, 2009 12:31 pm
Forum: General
Topic: schedule a web-proxy script
Replies: 11
Views: 4100

Re: schedule a web-proxy script

Dir Mr Mrz your codes is very good it works with me very good even on my mikrotik ver 2.9. now the schdule is working fine. Still I need only one thing : How to make web-proxy rule for address range (172.30.4.30-172.30.4.54) I try the links that Mr. normis give to me but I think they are about anoth...
by amsteen
Wed Apr 08, 2009 12:29 pm
Forum: General
Topic: schedule a web-proxy script
Replies: 11
Views: 4100

Re: schedule a web-proxy script

Mr Normis I have finished install mikrotik ver 3.2, I make basic setting. the internet now is working on one client PC. I notice that There is no proxy menu under ip, but there are WEB PROXY. in old version there was a proxy and web proxy menus under ip. Now I want start with a script for block mp3 ...
by amsteen
Tue Apr 07, 2009 10:23 pm
Forum: General
Topic: schedule a web-proxy script
Replies: 11
Views: 4100

Re: schedule a web-proxy script

yes sir you are right I use ver 2.9 and I will Upgrade.
But I have one question
If I upgrade could I keep My setting keep my setting or not.

I have mikrotik ver 3.2 and I install it to VMware for test after
test I will install to real machine.


thanks

Eng. Amgad
by amsteen
Tue Apr 07, 2009 2:15 pm
Forum: General
Topic: schedule a web-proxy script
Replies: 11
Views: 4100

Re: schedule a web-proxy script

First of all thanks for your quick respond


I use this web-proxy code to block download:
[admin@MikroTik] ip web-proxy access> add url="*.mp3" action=deny

And this work for me very well

Can we start from this code and made a schedule for it.

Thanks

Amgad
by amsteen
Tue Apr 07, 2009 1:20 pm
Forum: General
Topic: schedule a web-proxy script
Replies: 11
Views: 4100

Re: schedule a web-proxy script

Dear Sir's As I am new on microtik, Can you please give me codes for this "create a transparent proxy, ie catch all out going traffic and nat to 8080 and schedule a script to enable" "make the NAT rule forward only those addresses ( say 172.30.4.30-172.30.4.80 ) to the transparent proxy" I do not kn...
by amsteen
Tue Apr 07, 2009 11:16 am
Forum: General
Topic: schedule a web-proxy script
Replies: 11
Views: 4100

schedule a web-proxy script

Dear Sir's I am new here and I need some Help. I have two questions: First: I want to make a script for block mp3 files download During two hours in the morrining from 8:00 to 10:00. I use this web-proxy code to block download: [admin@MikroTik] ip web-proxy access> add url="*.mp3" action=deny any ti...
by amsteen
Sat Apr 04, 2009 11:25 am
Forum: Beginner Basics
Topic: help schedule a web-proxy script
Replies: 0
Views: 456

help schedule a web-proxy script

:? Dear Sir's I am new here and I need some Help. I want to make a script for block mp3 files download During two hours in the morrining from 8:00 to 10:00. I use this code from web-proxy to block download: [admin@MikroTik] ip web-proxy access> add url="*.mp3" action=deny any time except these two h...