Community discussions

MikroTik App

Search found 48 matches

by momi
Thu Aug 02, 2012 5:48 pm
Forum: Forwarding Protocols
Topic: Problem with routing filters
Replies: 8
Views: 2038

Re: Problem with routing filters

Set on Router1 and router2 lower OSPF distance on optical link, then it will be preferred. I predicted that you would say that...but the ospf cost in optical network is dynamic, and I must be absolutely sure that cost on wireless links is greater then on optical links....and I don't want any uncert...
by momi
Thu Aug 02, 2012 4:55 pm
Forum: Forwarding Protocols
Topic: Problem with routing filters
Replies: 8
Views: 2038

Re: Problem with routing filters

Ok in here is clear diagram (or not?)....links between my router RB433GL and Router1 and Router2 are wireless with low bandwidth...when my router advertise routes to other two routers, they begin to send traffic, ono to another over my router, across wireless links, and thats a bottleneck...there is...
by momi
Wed Aug 01, 2012 5:45 pm
Forum: Forwarding Protocols
Topic: Problem with routing filters
Replies: 8
Views: 2038

Re: Problem with routing filters

You can filter only external OSPF routes.
Since all my routes are internal (all ospf routers are in single area) I cannot use route filtering....is there any solution to my problem?

Thank you
by momi
Wed Aug 01, 2012 9:22 am
Forum: Forwarding Protocols
Topic: Problem with routing filters
Replies: 8
Views: 2038

Re: Problem with routing filters

I found something on this link: http://wiki.mikrotik.com/wiki/Manual:Routing/Routing_filters There is a note: Note that internal RIP filtering is done using prefix lists [and internal (intra-area) OSPF filtering is not supported yet] So intra-area ospf routes cannot be filtered?....Is this correct?
by momi
Tue Jul 31, 2012 3:56 pm
Forum: Forwarding Protocols
Topic: Problem with routing filters
Replies: 8
Views: 2038

Problem with routing filters

I think this is trivial, but it isnt working on my RB433GL or I am doing something wrong.....consider this network: _______________ _________(e.f.g.h/29)_| |____________(other networks) | |______________| ____|______ some ospf router1 (a.b.c.d/24) ____| RB433GL | |_________| | ______________ |______...
by momi
Fri Apr 27, 2012 12:26 pm
Forum: Forwarding Protocols
Topic: ospf solution
Replies: 6
Views: 2900

Re: ospf solution

Thank you, interesting......so is it possible to run openwrt on mikrotik? :?
by momi
Thu Apr 26, 2012 12:57 pm
Forum: Forwarding Protocols
Topic: ospf solution
Replies: 6
Views: 2900

Re: ospf solution

Thank you syadnom, but that is not what I was looking for...I need something to change ospf costs dynamiclly....but not to fast :?
by momi
Wed Apr 25, 2012 5:10 pm
Forum: Forwarding Protocols
Topic: ospf solution
Replies: 6
Views: 2900

ospf solution

Hi there, I am looking for some solution for this situation: I have RB433ah with two wireless interfaces and one ethernet interface. Two wireless interfaces are conected on two separated access points with ospf configured on them. Everything is working fine as long as there is no interference on wir...
by momi
Mon Sep 06, 2010 3:37 pm
Forum: The Dude
Topic: Graph
Replies: 4
Views: 1192

Re: Graph

Add them all together?
Yes, for example:

Interface1 tx bit rate: 100kbps
Interface2 tx bit rate: 100kbps
Interface3 tx bit rate: 100kbps
Interface4 tx bit rate: 100kbps
Interface5 tx bit rate: 100kbps
***************************
sum = 500kbps

Graph values:
X (bps)
Y (time)
by momi
Fri Sep 03, 2010 1:59 pm
Forum: The Dude
Topic: Graph
Replies: 4
Views: 1192

Graph

Is it possible to create Bit Rate Graph that will show sum Tx or Rx traffic for 5 interfaces? ...for example.
by momi
Wed Jan 06, 2010 3:35 pm
Forum: The Dude
Topic: Vote for new DUDE features!
Replies: 117
Views: 47848

Re: Vote for new DUDE features!

1. Please Dude on linux............................................!!!!!!!!!!!!!!!!!!!!!!1
by momi
Wed Jan 06, 2010 3:23 pm
Forum: The Dude
Topic: Dude v3.5
Replies: 8
Views: 4161

Re: Dude v3.5

I have upgraded dude form 3.4 to 3.5....everything works fine except spectral spectrum...when i run it it fails and says:std failure: broken path(2)
by momi
Wed Oct 21, 2009 5:51 pm
Forum: The Dude
Topic: list ip
Replies: 1
Views: 585

list ip

Hello,

is it possible to list all ip addresses that i have in my dude map to txt file or something like that?
by momi
Mon Oct 12, 2009 4:15 pm
Forum: General
Topic: Force reboot
Replies: 17
Views: 62150

Re: Force reboot

Thank you...iy didn't work. But forget perl...is there a way to force reboot in RouterOS from command line? Something like this:system force reboot.... :?
by momi
Mon Oct 12, 2009 12:39 pm
Forum: General
Topic: Force reboot
Replies: 17
Views: 62150

Re: Force reboot

#!/usr/bin/perl use Net::Telnet;#poziva se Telnet modul #Inicijalizacija username-a i passworda $username = 'admin'; $pass = 'password'; $telnet = new Net::Telnet ( Timeout=>10, Errmode=>'die'); $telnet->open('some ip'); $telnet->login($username, $pass); $telnet->cmd('/system reboot' + <CR><LF> + '...
by momi
Mon Oct 12, 2009 10:30 am
Forum: General
Topic: Force reboot
Replies: 17
Views: 62150

Re: Force reboot

Yes, there is a question...hm is there a way to force reboot? :?
by momi
Sun Oct 11, 2009 12:40 am
Forum: General
Topic: Force reboot
Replies: 17
Views: 62150

Force reboot

Is it possible to force reboot on RouterOS? I have some Perl scripts that do various things in RouterOS, but when it try to reboot, the command times out-because of question: Reboot, y/n. is it possible to force reboot e.g that system do not ask that question?
by momi
Wed Sep 23, 2009 10:30 am
Forum: Scripting
Topic: script?
Replies: 8
Views: 1426

Re: script?

I am sorry for annoyance, but yesterday this wasn't working...today the sam code works: :global identity; :global SSL; :set identity [/system identity get name]; :put $identity; :set SSL [/interface wireless registration-table get [/interface wireless registration-table find interface="wlan1"] signa...
by momi
Wed Sep 23, 2009 9:37 am
Forum: Scripting
Topic: script?
Replies: 8
Views: 1426

Re: script?

This is the parameters that I want to display with mu script:

I have success in displaying all other parameters except signal-strength and uptime. Does anyone has a code line for this?
by momi
Tue Sep 22, 2009 5:38 pm
Forum: Scripting
Topic: script?
Replies: 8
Views: 1426

Re: script?

:global identity;
:global SSL;

:set identity [/system identity get name];
:put $identity;
:set SSL [/interface wireless registration-table get [/interface wireless registration-table find signal-strength] signal-strength];
:put $SSL;
 
But I still get invalid item number :?
by momi
Tue Sep 22, 2009 4:48 pm
Forum: Scripting
Topic: script?
Replies: 8
Views: 1426

Re: script?

But when I put /interface wireless registration-table get [0] signal-strength it says bad command name 0... :? I am little confused...help me a little bit more :wink:
by momi
Tue Sep 22, 2009 4:09 pm
Forum: Scripting
Topic: script?
Replies: 8
Views: 1426

script?

I want to make a script which tells me identity of the routerboard and signal strength of station: :global identity; :global SSL; :set identity [/system identity get name]; :put $identity; :set SSL [/interface wireless registration-table get signal-strength]; :put $SSL; but I get the identity correc...
by momi
Mon Jul 06, 2009 1:25 pm
Forum: The Dude
Topic: Dude and SSH
Replies: 3
Views: 1223

Re: Dude and SSH

Is this a bug on The Dude 3.4? We have a big network mostly build from Mikrotik's routers and when we made an upgrade from The Dude 3.2 to The Dude 3.4 we have a problem with SSH...anyone has a solution? :? :?
by momi
Sat Jun 27, 2009 3:24 pm
Forum: Wireless Networking
Topic: R52n & R2n
Replies: 30
Views: 15245

Re: R52n & R2n

My RouterBOARD 411 doesn't recognize R52n wireless card...is this because of version of RouterOS or the hardware...and when I change my R52 card in RouterBOARD 433AH with r52n then I get smaller signal coverage...did anyone has experience like that?
by momi
Thu Jun 18, 2009 9:17 am
Forum: Beginner Basics
Topic: RouterBOARD
Replies: 7
Views: 1050

Re: RouterBOARD

Thanks dude...
by momi
Wed Jun 17, 2009 1:28 pm
Forum: Beginner Basics
Topic: RouterBOARD
Replies: 7
Views: 1050

Re: RouterBOARD

OK We have a big wireless network and it is almost completely build from Mikrotik's devices (300 of RouterBOARDs of all kind)...but in the last 10 days three RB 532A crushed...to be precise the POE port always goes up and down...these routers were working for about 2 years...so what is the problem? ...
by momi
Wed Jun 17, 2009 12:40 pm
Forum: Beginner Basics
Topic: RouterBOARD
Replies: 7
Views: 1050

Re: RouterBOARD

But this links me right here... :shock: :shock: :shock: :shock:
by momi
Wed Jun 17, 2009 12:30 pm
Forum: Beginner Basics
Topic: RouterBOARD
Replies: 7
Views: 1050

Re: RouterBOARD

Thank you!!!!
by momi
Wed Jun 17, 2009 10:59 am
Forum: Beginner Basics
Topic: RouterBOARD
Replies: 7
Views: 1050

RouterBOARD

Well I have some serious problems about hardware (RouterBOARD) and not about RouterOS...where I can find forum for that? :?
by momi
Fri May 29, 2009 5:34 pm
Forum: The Dude
Topic: The Dude time
Replies: 3
Views: 1835

Re: The Dude time

thank you sergejs for replay...our server is on PC Windows Server 2003 Edition and the problem is solved...the problem was that our server don't synchronize with windows time protocol but we chose another...
by momi
Fri May 29, 2009 1:38 pm
Forum: The Dude
Topic: The Dude time
Replies: 3
Views: 1835

The Dude time

Hello,
maybe this was a topic earlier but i don't have time to read...but, how to adjust time and date on The Dude server...or on The Dude client...it always says it is 1st January...and time is always between 00 h and 23h :?
by momi
Mon May 11, 2009 1:45 pm
Forum: RouterBOARD hardware
Topic: RB433AH can't downgrade with netinstall
Replies: 4
Views: 1722

Re: RB433AH can't downgrade with netinstall

I think you should downgrade firmware...or the .npk file is corrupted.

But why 3.15 instead of 3.23? it is almost the same
by momi
Fri May 08, 2009 10:01 am
Forum: RouterBOARD hardware
Topic: netinstall-help
Replies: 6
Views: 2051

Re: netinstall-help

Well one of my older colleague has the same problem and he says me just to change the computer (this one is dual boot, win-linux) it is something about windows security...didn't have time to ask him why
by momi
Thu May 07, 2009 2:48 pm
Forum: RouterBOARD hardware
Topic: netinstall-help
Replies: 6
Views: 2051

Re: netinstall-help

Problem solved.

Thanks nobody for help... :lol: :lol: :) :)
by momi
Thu May 07, 2009 2:44 pm
Forum: RouterBOARD hardware
Topic: RB433 AH Ethernet Lock up problem.
Replies: 17
Views: 3431

Re: RB433 AH Ethernet Lock up problem.

Anybody get the answer yet? my second router 433ah has the same problem....... :? :? :shock: :shock:
by momi
Wed May 06, 2009 1:02 pm
Forum: RouterBOARD hardware
Topic: netinstall-help
Replies: 6
Views: 2051

netinstall-help

i am trying to instal routeros-mipsle-3.23.npk on routerboard 532A with netinstall and this is the error an this what the HyperTerminal says: Found server at 00:11:11:E4:E2:DC Formatting disk.... installing routeros-mipsle-3.23 [ ] FATAL ERROR: bad network connection ERROR: installation of routeros-...
by momi
Mon May 04, 2009 9:52 am
Forum: RouterBOARD hardware
Topic: RB433 AH Ethernet Lock up problem.
Replies: 17
Views: 3431

Re: RB433 AH Ethernet Lock up problem.

i have the sam problem too, but with RB532A...
by momi
Sat Apr 18, 2009 2:53 pm
Forum: Wireless Networking
Topic: How to connect to networks with 5GHz antenas
Replies: 1
Views: 563

Re: How to connect to networks with 5GHz antenas

use wds-one side as ap bridge and other side as wds station...booth side have to be in the same network :)
by momi
Wed Apr 15, 2009 2:59 pm
Forum: RouterBOARD hardware
Topic: I Can't log from WINBOX to my wireless network
Replies: 3
Views: 735

Re: I Can't log from WINBOX to my wireless network

can u pls write your config...maybe your snmp isn't correct
by momi
Wed Apr 15, 2009 9:47 am
Forum: RouterBOARD hardware
Topic: RouterBOARD and QoS
Replies: 1
Views: 726

RouterBOARD and QoS

Hi guys, I've been doing lately some traffic shaping and prioritizing VOIP traffic on RB433AH on some AP and what I noticed is that the performances of RouterBOARD dropped down so much... :( is it common behavior of the RouterBOARD when it comes to QoS? Anyone have same problems? What should i do? T...
by momi
Tue Apr 14, 2009 3:15 pm
Forum: General
Topic: QOS for VOIP device.
Replies: 1
Views: 571

Re: QOS for VOIP device.

by momi
Tue Apr 14, 2009 9:30 am
Forum: Wireless Networking
Topic: Wireless Mikrotik AP point
Replies: 4
Views: 1034

Re: Wireless Mikrotik AP point

thank u for the replies!
by momi
Fri Apr 10, 2009 1:48 pm
Forum: Wireless Networking
Topic: HELP WITH POINT TO POINT CONNECTION
Replies: 7
Views: 1568

Re: HELP WITH POINT TO POINT CONNECTION

I think that you have made a mistake. Your first radio should be in ap-bridge mode to make a WDS System.
by momi
Thu Apr 09, 2009 9:43 am
Forum: Wireless Networking
Topic: Wireless Network question
Replies: 1
Views: 479

Re: Wireless Network question

Hansika this forum discuss MikroTik's gear and equipment...u should post this topic on other forum...every u said it can br done with a very little knowledge and you can get informations on the internet

Good luck
by momi
Thu Apr 09, 2009 9:35 am
Forum: Wireless Networking
Topic: Wireless Mikrotik AP point
Replies: 4
Views: 1034

Re: Wireless Mikrotik AP point

Anyone? :(
by momi
Thu Apr 09, 2009 9:33 am
Forum: Wireless Networking
Topic: Wifi Base-Station near GSM Base-Station
Replies: 18
Views: 2793

Re: Wifi Base-Station near GSM Base-Station

yes we did use shielded metal enclosures but it didn't work so well. If you can change height of the antennas e.g 3 or 4 meters above or below GSM equipment it would gain some improvement...

Good lock

Momi
by momi
Wed Apr 08, 2009 2:17 pm
Forum: Wireless Networking
Topic: Wifi Base-Station near GSM Base-Station
Replies: 18
Views: 2793

Re: Wifi Base-Station near GSM Base-Station

doush change the building-we have problems on one mosque in sarajevo with GSM antennas :? :(
by momi
Wed Apr 08, 2009 2:01 pm
Forum: Wireless Networking
Topic: Wireless Mikrotik AP point
Replies: 4
Views: 1034

Wireless Mikrotik AP point

Good day I am working on the wireless project in Sarajevo, and we use Mikrotik's gear. We are forming AP with RouterBOARD 433AH, R52H wireless card, sector antennas (16 dBi). I am wondering about signal coverage and max and optimal number of clients that can be associated with one AP. I didn't find ...