Guys, Can your SIP application work without the Linux SIP ALG/NAT helper, and if so, have you tried just turning it off... [admin@MikroTik] > /ip firewall service-port disable sip ...to see if that fixes the problem for you? -- Nathan Disabled the SIP port under IP -> Firewall - > Service Ports (RO...

Disabled the SIP port under IP -> Firewall - > Service Ports
Been working perfectly for a week now, no need to reboot the MT

The method below will be used to establish a PPPoE Dialup via your Bridged nor Routed ADSL device
http://wiki.mikrotik.com/wiki/How_to_Co ... _xDSL_Line

cards are Dbii f52n (Atheros 11N type) pigtail about 1 feet ( 30cm ) plus rf 400 ca. 1foot (40cm) so pretty short 1 connectors thats about 3 dB loss. And yes we did realign thats when i figured something is wrong, because otherwise: i dont change a running horse i also checked all the frequencies.....

Any idea how much faster the new gen CPU used in the RB2011 series is ?
RB2011 Atheros 600MHz MIPS 74Kc V4.12
RB400 Atheros 680Mhz MIPS 24Kc V7.4

According to www.bogomips.ru "cat /proc/cpuinfo"
MIPS 24Kc V7.4 680Mhz 452 BogoMips D-Link DIR-825 rev. B1

Minor problem - typo consumtion should be consumption Winbox & Webfig HW RB435G http://i522.photobucket.com/albums/w345/midafricam/Power-3-System-health.jpg Terminal - no typos /system health> print fan-mode: auto use-fan: main active-fan: none voltage: 22.9V current: 92mA temperature: 16C power...

Look at these pages on Mutiple WAN and sourced based routing

http://forum.mikrotik.com/viewtopic.php?f=2&t=30222

http://wiki.mikrotik.com/wiki/Load_Bala ... e_Gateways

Possible recommendation is to install a PPPoE device
(to dialout on the LAN) to the PPPoE Server
eliminating setting up PPPoE clients on the PCs.

We setup a repeater at a residential premise and would like to setup User A Network (ether1 LAN as PPPoE Client on the RB) as his bandwidth is not metered. Alternative: Install a seperate wireless device dialling out to the Wireless AP (same as User B&C) Can use I use the RB PPPoE client (gatewa...

Best bet would be to purchase the RB450G with 256 Mb RAM,
limited to 32 Mb Ram on the RB750 - sorry

Running Radius Mananger 3.80

Great product except for the below Negative points:
1. Poor reporting - write my own reports fetch data directly from mysql
(Usermanager gives you reports on vouchers sold per month/day)

2. Hotspot voucher generation - cannot add prefix to card numbers like usermanager

I would rather try and move the SR9 higher giving better visibility with no obstructions.
Why don't you install the SR9 higher to below the 3 sectors.

A friend of mine tested the SR9 with 20db Yagi on each end totally NLOS
Distance: 49 km
Bandwidth: 1-2 Mb/s
SNR >22

Thanks guys, boy do I feel like an idiot
ppp not installed.

Anyone know why the PPTP setup was removed from the GUI and the Command Line /interface -> no pptp-client Routerboard: RB112 License: L4 RouterOS Version: 2.9.41 CPU: MIPS 4Kc V0.11 175 Mhz ==> No PPP setup for PPTP,PPPoE,IPSEC client/server Routerboard: RB133C License: L4 RouterOS Version: 2.9.41 C...

Question 1: One of my clients requires his users to only access a number of authorized sites, is that possible. With a regular Linux distro I used Squid Guard http://www.squidguard.org/ and based on your username you could access all sites or only a selected number of sites. Question 2: If you have ...

Tried the Netinstall from another PC and it worked, also running XP
Thanks for the help

Upgraded from 2.9rc7 to 2.9.5 with RB532 BOOTING FROM NAND: ============== Any help will be great, tried to do the Netinstall but get the bind() failed Only usage of each socket address is normally permitted. (O/S Win XP Prof) RouterBOOT booter 1.3 RouterBoard 532 CPU frequency: 266 MHz Memory size:...