Community discussions

MikroTik App

Search found 175 matches

by coffeecoco
Sun Jun 09, 2013 10:19 am
Forum: General
Topic: v6.0 released
Replies: 321
Views: 75041

Re: v6.0 released

This is what i got when i downgraded, from ros6 to ros5 In the pictures below From bottom to TOP you can see 3 x Local Bridges AND 2 x Bridge1 they mysteriously appeared after vanishing on ros6 every time i rebooted, HENCE why there are so many an indictation of how many times i had to re add the br...
by coffeecoco
Sun Jun 09, 2013 10:01 am
Forum: General
Topic: v6.0 released
Replies: 321
Views: 75041

Re: v6.0 released

I give up on Ros6, dear mikrotik, no offence but you release software way too early, I'm a network corporate administrator And a Linux server administrator, I manage the servers behind the development farms and Staging farms AND the Live production Farms. You make have so many flaws in how you relea...
by coffeecoco
Sun Jun 09, 2013 9:44 am
Forum: Virtualization
Topic: kvm ccr question
Replies: 3
Views: 2837

Re: kvm ccr question

Oh okay that clear's that up thanks


It would not bother me if metarouter took a bullet :)
by coffeecoco
Sat Jun 08, 2013 2:35 pm
Forum: Virtualization
Topic: kvm ccr question
Replies: 3
Views: 2837

Re: kvm ccr question

janisk im brain stoming here but if it is fairly good i can see potential eg, if kvm down or not respond a fancy method to bring up a kvm on another host to bring up a backup guest

kinda like how vmware can bring up another host if the primary is down
by coffeecoco
Sat Jun 08, 2013 2:31 pm
Forum: Virtualization
Topic: kvm ccr question
Replies: 3
Views: 2837

kvm ccr question

forgive me if its said else where but is ccr 64bit?
I read that ccr has like 16gb of ram so has to be

SOOOOOO does kvm work well ? anyone tested 64bit guests?
also how compareable is the ccr cpu compared to a production xeon ?
by coffeecoco
Sat Jun 08, 2013 2:28 pm
Forum: General
Topic: v6.0 released
Replies: 321
Views: 75041

Re: v6.0 released

the problem with disapearing bridge interfaces and randomly dissapearing WLAN interfaces is still there FYI this has been happening since day 1 of the rc6.0 beta, i reported it many times but no one gave a crap...... 6.1 did not resolve the issue.! Just be patient, we'll get a reward someday as a r...
by coffeecoco
Sat Jun 08, 2013 12:46 am
Forum: General
Topic: v6.0 released
Replies: 321
Views: 75041

Re: v6.0 released

the problem with disapearing bridge interfaces and randomly dissapearing WLAN interfaces is still there

FYI this has been happening since day 1 of the rc6.0 beta, i reported it many times but no one gave a crap......

6.1 did not resolve the issue.!
by coffeecoco
Tue Jun 04, 2013 2:30 pm
Forum: Virtualization
Topic: Nested KVM Virtualization Janisk please read
Replies: 3
Views: 4001

Re: Nested KVM Virtualization Janisk please read

I know :P see what i did there :P hint hint please request 64bit ros
by coffeecoco
Fri May 24, 2013 9:42 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1040553

Re: CLOUD CORE ROUTER

So...... tell me.... why did you even call this a Cloud Core Router?

I WANT x86_64 ROS So i can RUN KVM 64bit.........



no one uses 32bit......
by coffeecoco
Wed May 15, 2013 10:56 am
Forum: General
Topic: smart protection
Replies: 6
Views: 1017

Re: smart protection

you can get alot of smarts in radius IE radiusmanager can control burst monthly usage logs the usage
go down that track

set the other fiddly bits on the ros probly gobally
by coffeecoco
Wed May 15, 2013 10:50 am
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 91674

Re: New Ethernet port flap issue enquiery, PLS JOIN!

I think this is a weakness in poor capacitors chineese capacitors are not very tolerant

I dare one of u who face this issue replace the caps with quality ones on the board its harmless

5 bucks says im onto something here
by coffeecoco
Mon Apr 22, 2013 11:06 am
Forum: Virtualization
Topic: Mac MINI + KVM + ROS
Replies: 2
Views: 2783

Mac MINI + KVM + ROS

For all that are interested You can install eg, centos on a Mac Mini then run KVM
and install Routeros and WAM you have the smallest Virtual machine :)

I now have a portable LAB :) I dont have any plans to install on any remote site but :P
by coffeecoco
Mon Apr 22, 2013 11:04 am
Forum: Virtualization
Topic: question regarding vmware and KVM in ROS
Replies: 7
Views: 4084

Re: question regarding vmware and KVM in ROS

Oh, how about this, understand that you can not "create", keyword but can you run it if you already have created the kvm image? http://forum.mikrotik.com/viewtopic.php?f=15&t=37975 I notice on this thread you say it can run KVM and be a KVM of a host ? so this is why everyone wants hypervisor? Basi...
by coffeecoco
Fri Apr 05, 2013 6:36 pm
Forum: General
Topic: 16Gb/s ROS traffic-gen
Replies: 0
Views: 390

16Gb/s ROS traffic-gen

<insert> EVIL GRIN </end>
Actually its not actualy being recived on the remote side, the MTU is insanely high
hellyes.png
by coffeecoco
Wed Apr 03, 2013 1:39 am
Forum: Virtualization
Topic: ESxi5 and Mikrotik 5.20
Replies: 11
Views: 6032

Re: ESxi5 and Mikrotik 5.20

yep, hey umm janisk do you remember this ticket ?
[Ticket#2013010966000343]
by coffeecoco
Tue Apr 02, 2013 1:23 pm
Forum: Virtualization
Topic: ESxi5 and Mikrotik 5.20
Replies: 11
Views: 6032

Re: ESxi5 and Mikrotik 5.20

are you saying x86 ros is limited to 8

in what respect?

I have visually booted alot more
so im a little confused please explain more
maybe an example?

Do you have any feedback on my comments i made directly above?
by coffeecoco
Mon Apr 01, 2013 8:35 am
Forum: General
Topic: bug/fault x86
Replies: 1
Views: 550

bug/fault x86

is there anything different with r6 compared to r5 in how configs are saved to routeros? I am constantly getting issues with perticularly bridge interfaces just vaninishing on 5.x it never ever ever happens but on r6 it happens all the time, its literally happen to me about 100 times I have a load o...
by coffeecoco
Mon Apr 01, 2013 2:16 am
Forum: General
Topic: Found fault/bug
Replies: 7
Views: 3089

Re: Found fault/bug

janisk although this is old I cant seem to get a response via support The tests are firstly, okay lets load a ton of kvm VM's give it a good thrashing and lets see how much traffic i can pump though it, I will then decide ok this system really can only handle X amount that is all , perhaps my target...
by coffeecoco
Sun Mar 31, 2013 11:35 pm
Forum: General
Topic: I want to convert my usb installs to hhd
Replies: 2
Views: 566

Re: I want to convert my usb installs to hhd

thanks mate

could staff look into my ticket ?

thanks
by coffeecoco
Sun Mar 31, 2013 3:52 pm
Forum: Virtualization
Topic: ESxi5 and Mikrotik 5.20
Replies: 11
Views: 6032

Re: ESxi5 and Mikrotik 5.20

Ive had some bad luck with mikrotik kvm hosts especially with 5.x as vm i can crash the host with certain tasks tried proxmox recently 5.x i could crash proxmox host within mins... traffic-gen does something really bad i dont know what though. going to try 6 beta on proxmox already tried 6.0 kvm as ...
by coffeecoco
Sat Mar 30, 2013 3:53 pm
Forum: Virtualization
Topic: ESxi5 and Mikrotik 5.20
Replies: 11
Views: 6032

Re: ESxi5 and Mikrotik 5.20

aacable hows your experience with mikrotik compared to kvm vs vmware stability ?
by coffeecoco
Sat Mar 30, 2013 3:45 pm
Forum: General
Topic: I want to convert my usb installs to hhd
Replies: 2
Views: 566

I want to convert my usb installs to hhd

hi i want to convert my usb installed ros to hhd's
I get alot of problems with the usb installs and its just not stable...

staff?
by coffeecoco
Sat Mar 30, 2013 3:24 pm
Forum: Virtualization
Topic: Need feedback for KVM and proxmox
Replies: 9
Views: 7275

Need feedback for KVM and proxmox

okay so, Ive done alot of my own testing, and i can always find a fault with the kvm on x86 such as kvms get stuck, dont restart pre 6 beta some features such as traffic gen lock up the vm and host causing it to crash even in beta 6 i still get that issue, some times the kvms get broken and have to ...
by coffeecoco
Fri Mar 29, 2013 12:55 pm
Forum: General
Topic: janisk
Replies: 0
Views: 391

janisk

are you around?
by coffeecoco
Wed Mar 27, 2013 1:06 pm
Forum: General
Topic: Mellanox 10G Ethernet adapter
Replies: 7
Views: 4971

Re: Mellanox 10G Ethernet adapter

5 bucks says it dont happen....
but im hoping so +1
by coffeecoco
Wed Mar 13, 2013 9:41 pm
Forum: General
Topic: RouterOS v6rc11
Replies: 115
Views: 39122

Re: RouterOS v6rc11

Ticket#2013010966000343

can someone please reply to my ticket ..
by coffeecoco
Fri Feb 01, 2013 6:08 am
Forum: General
Topic: Winbox for android, when?
Replies: 52
Views: 52161

Re: Winbox for android, when?

I have an old phone with a tiny screen (2.9" i think). I use Google Chrome and it works great. I don't recommend a phone as your ONLY access to a router, but for simple tasks, it works fine Screenshot_2013-01-29-10-19-20.png Define Great, its not better is it? or equal, what matters is that there a...
by coffeecoco
Fri Jan 25, 2013 2:45 am
Forum: General
Topic: Winbox for android, when?
Replies: 52
Views: 52161

Re: Winbox for android, when?

coffeecoco , maybe you misunderstood me. That was a valid question, I was asking for your opinion. I did not understand your point, I was asking for a clarification. Please summarize your suggestions, and I will forward them to the people responsible. I think the language barrier is sometimes getti...
by coffeecoco
Thu Jan 24, 2013 12:12 am
Forum: General
Topic: Winbox for android, when?
Replies: 52
Views: 52161

Re: Winbox for android, when?

Normis are you really that silly ? or are you having fun with us all ?
Have you never worked with support staff? If you are not careful enough they will turn you around and tell you that you don't understand your own requirements. No offence.
mate that makes no sense. no offence
by coffeecoco
Wed Jan 23, 2013 11:39 pm
Forum: General
Topic: Winbox for android, when?
Replies: 52
Views: 52161

Re: Winbox for android, when?

Sorry but it is still not clear how Webfig is different from Winbox, if we are talking about Android. The only real difference is MAC connecivity, and that doesn't apply to phones anyway. So you already have Winbox for Android come on seriously you have no idea what the difference is? tikbox and wi...
by coffeecoco
Wed Jan 23, 2013 6:10 am
Forum: General
Topic: Winbox for android, when?
Replies: 52
Views: 52161

Re: Winbox for android, when?

Sorry but it is still not clear how Webfig is different from Winbox, if we are talking about Android. The only real difference is MAC connecivity, and that doesn't apply to phones anyway. So you already have Winbox for Android come on seriously you have no idea what the difference is? tikbox and wi...
by coffeecoco
Wed Jan 23, 2013 4:23 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1040553

Re: CLOUD CORE ROUTER

Is there a changelog for RC8
by coffeecoco
Thu Jan 17, 2013 9:55 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1040553

Re: CLOUD CORE ROUTER

I know :P it was a hint! make me one ! stat!
by coffeecoco
Thu Jan 17, 2013 8:01 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1040553

Re: CLOUD CORE ROUTER

where can i get a 64bit ROS for my x86
by coffeecoco
Mon Jan 14, 2013 7:39 am
Forum: General
Topic: v6 rc6 released
Replies: 215
Views: 66803

Re: v6 rc6 released

FYI Submited this ticket today. You wrote: ... I want to inform you going from 5.XX KVM x86 to 6.rc6 I notice something, i have currently loaded 30+ kvm in a router ( testing and bench marking) when i reboot the host, some times the kvm when it goes to auto start on boot. the kvm says no image found...
by coffeecoco
Sat Jan 12, 2013 4:15 am
Forum: Forwarding Protocols
Topic: BGP with 300k routes demo
Replies: 4
Views: 1560

Re: BGP with 300k routes demo

Get a cople of global BGP routes.
I dont exactly have access to any real BGP route tables, at the moment anyway.

But i could simulate it in a lab easy
by coffeecoco
Sat Jan 12, 2013 1:43 am
Forum: Forwarding Protocols
Topic: BGP with 300k routes demo
Replies: 4
Views: 1560

Re: BGP with 300k routes demo

While essentially a lab setup i'm wondering what were system resources like with this?
mackboopro Parllalels VM with 1024 ram.
by coffeecoco
Wed Jan 09, 2013 12:51 pm
Forum: Virtualization
Topic: question regarding vmware and KVM in ROS
Replies: 7
Views: 4084

Re: question regarding vmware and KVM in ROS

Oh, how about this, understand that you can not "create", keyword but can you run it if you already have created the kvm image?

http://forum.mikrotik.com/viewtopic.php?f=15&t=37975
I notice on this thread you say it can run KVM and be a KVM of a host ?

so this is why everyone wants hypervisor?
by coffeecoco
Wed Jan 09, 2013 4:21 am
Forum: Virtualization
Topic: question regarding vmware and KVM in ROS
Replies: 7
Views: 4084

question regarding vmware and KVM in ROS

okay so i have HP G5 server vt-x support

i can load KVM's and ROS detects it has the correct CPU codes for support

question is is there anything else required for ROS to create KVM and run them While Within VMWARE ?

it requires VT-D is that right?
by coffeecoco
Tue Jan 08, 2013 9:37 am
Forum: Forwarding Protocols
Topic: BGP with 300k routes demo
Replies: 4
Views: 1560

BGP with 300k routes demo

Who wants me to BGP leak there webs to me :P

kidding, created 300k fake bgp routes with a linux box
bgpleak.png
by coffeecoco
Mon Jan 07, 2013 8:31 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1040553

Re: CLOUD CORE ROUTER

I am about to order one but I had question about port/cpu. The router I am contemplating replacing currently only has ports in use. Wan/Lan, the lan port terminates 20 or so vlans in the building (router on a stick type config) with 1 vlan going to ospf distribution routers for other buildings. Fro...
by coffeecoco
Mon Jan 07, 2013 12:48 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1040553

Re: CLOUD CORE ROUTER

I could be wrong but i think thats correct to assume that the CCR aggregate bandwidth, you could benefit from bonding if you could set that up, but since its a router on a stick, i assume that you have limited available cabling
by coffeecoco
Sun Jan 06, 2013 1:05 am
Forum: General
Topic: Found fault/bug
Replies: 7
Views: 3089

Re: Found fault/bug

while screenshot shows awesome resolution of your screen it does not tell exactly what is happening. First of - if you are running something in KVM, you can do just the same on host system, to see if that is load issue or something different since packets for guest are manged by host, then by guest...
by coffeecoco
Sat Jan 05, 2013 11:58 am
Forum: General
Topic: Need help deciphering logs, potential attack?
Replies: 4
Views: 1141

Re: Need help deciphering logs, potential attack?

It sounds like you got DDoS'ed hard. The BFD problems were due to the CPU going 100% constantly and not being able to keep up with BFD updates, and the OSPF peer went down as well because of the BFD fails. But the BFD failed only because of the DDoS. It was maxing out the gigabit port on my router....
by coffeecoco
Fri Jan 04, 2013 6:03 pm
Forum: General
Topic: New Routing Engine
Replies: 7
Views: 2047

New Routing Engine

Hi staff/all I want to know if ROS 6 has the " new routing engine" that ive read all over the forums i am not sure if v6 has it?
by coffeecoco
Fri Jan 04, 2013 5:57 pm
Forum: Forwarding Protocols
Topic: IGMP Proxy issue
Replies: 60
Views: 29969

Re: IGMP Proxy issue

i feel your pain, this is why i am disgusted recently

i want mik to release a ticketing system, to view progress...
by coffeecoco
Fri Jan 04, 2013 4:10 am
Forum: General
Topic: v6 rc6 released
Replies: 215
Views: 66803

Re: v6 rc6 released

Al of you who replied to the upset post i created, i dont mean to upset anyone but none of you have successfully justified the issues at hand. I am not expecting cisco service from mikrotik I am not blaming anyone cut the crap guys, There needs to be an improvement. thats it, stop defending Ive been...
by coffeecoco
Thu Jan 03, 2013 2:01 am
Forum: General
Topic: v6 rc6 released
Replies: 215
Views: 66803

Re: v6 rc6 released

Hello infused, Ok, so all those are saying this is an Alpha, Mikrotik then are releasing products to the market place with Alpha code? Owed on the wide number of options and functions RouterOS is sorted with and pending on the rich feature sets it comes with, it´ll be perhaps published and launched...
by coffeecoco
Thu Jan 03, 2013 1:57 am
Forum: General
Topic: v6 rc6 released
Replies: 215
Views: 66803

Re: v6 rc6 released

Normis, I don't mean to be disrespectful, i read these forums alot and its great education But regardless of your post, it don't matter that is BAD FORM, and a terrible business idea to do that. We are customers you cant reason with us, so you must do the correct thing, you will never win a this bat...
by coffeecoco
Tue Jan 01, 2013 11:23 am
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1040553

Re: CLOUD CORE ROUTER

for me it happened on x86. seemed like HDD was lost: no entries in /files, and admin's password reset to default. reboot - and everything is back :)
this has happened to me a number of times, i thought my hhd was faulty now i think its ROS
by coffeecoco
Sun Dec 30, 2012 12:49 pm
Forum: General
Topic: x86 RouterOS box not detecting NIC
Replies: 8
Views: 1878

Re: x86 RouterOS box not detecting NIC

yes its a g3
by coffeecoco
Sun Dec 30, 2012 12:39 pm
Forum: General
Topic: v6 rc6 released
Replies: 215
Views: 66803

Re: v6 rc6 released

I did a speed test today with simple queue i used traffic generator to send 20mb/s and set my que to max limit 10mb/s the result was i got 12mb/s on the interface, but yet the que stats show 10mb/s ? also i am having ZERO null nothing luck getting simple queues to detect traffic generator, yet the q...
by coffeecoco
Fri Dec 28, 2012 5:35 am
Forum: General
Topic: Found fault/bug
Replies: 7
Views: 3089

Re: Found fault/bug

Its almost as if routeros cant handle too many queues with alot of traffic ? is there anyone out there with an insane amount of queues and has alot of bandwidth going over them? is this an x86 issue ? or a routeros issue? I personally am going for its a slight "lag" issue perhaps there are measures ...
by coffeecoco
Fri Dec 28, 2012 3:35 am
Forum: General
Topic: Found fault/bug
Replies: 7
Views: 3089

Re: Found fault/bug

Also why is the management of the KVM so problematic starting stopping the kvm is not good, some times it dont stop and get stuck on "starting" or "restarting" half the time its still running, and what makes it worse when its in this stuck state, you can no longer control it, most of the time the co...
by coffeecoco
Fri Dec 28, 2012 2:56 am
Forum: General
Topic: Found fault/bug
Replies: 7
Views: 3089

Found fault/bug

Ros 6.0rc6 x86 I have 30 KVM's running I run traffic generator to the bridge interface that they are all connected to just bench testing, I decided to enable a que on each interface to test, how the system handles 20mb/s traffic gen to the bridge interface, and apply a 10m/s QUE to each interface......
by coffeecoco
Thu Dec 27, 2012 2:35 pm
Forum: General
Topic: Drivers: missing
Replies: 2
Views: 1284

Drivers: missing

5 device="03:00.0" name="NetXtreme II BCM5708 Gigabit Ethernet (rev: 18)" vendor="Broadcom Corporation" category="Ethernet controller" vendor-id="0x14e4"
device-id="0x164c" irq=5 memory=0xFA000000-0xFBFFFFFF


5.22 this works ( onboard lan )
upgrade to 6.b6 it appears but dont work
by coffeecoco
Thu Dec 27, 2012 8:37 am
Forum: General
Topic: Major problem: Traffic generator
Replies: 2
Views: 754

Re: Major problem: Traffic generator

damit that means i loose "thedude"
by coffeecoco
Thu Dec 27, 2012 6:55 am
Forum: General
Topic: Major problem: Traffic generator
Replies: 2
Views: 754

Major problem: Traffic generator

Traffic generator is good but it has a flaw that crash's the server in my case x86 5.22 when you stop and start traffic generator too many times in a short period it crash the box and un recoverable untill manual reboot of server today it happened again i literally started the traffic monitor waited...
by coffeecoco
Thu Dec 27, 2012 2:26 am
Forum: General
Topic: Router crash: stp
Replies: 1
Views: 511

Router crash: stp

Hi staff please attempt to see if you can replicate a crash i just experienced i had traffic generator running for a few days to test stability to a bridge interface, that had 30 KVM's after a few days i turned on STP while the traffic generator was running POOF router crashed. i had to manually res...
by coffeecoco
Thu Dec 27, 2012 1:15 am
Forum: General
Topic: Console has crashed; please log in again.
Replies: 0
Views: 507

Console has crashed; please log in again.

admin@MikroTik] > g
name:
[admin@MikroTik] > g
name: sdsd

Console has crashed; please log in again.


I can replicate this over and over and over does same thing
by coffeecoco
Thu Dec 27, 2012 12:54 am
Forum: General
Topic: Issue: with config lost
Replies: 2
Views: 626

Re: Issue: with config lost

So i loaded all my kvm images to a sata drive, and now its just ros that runs on the usb dongle...

I think that the usb dongles cant handle alot of read/writes that's my suspicion
by coffeecoco
Wed Dec 26, 2012 3:07 am
Forum: General
Topic: 5.22 released!
Replies: 104
Views: 50752

Re: 5.22 released!

Hi i have problem with KVM on x86 for bench testing I loaded 20 Ros KVM into a Dell Routeros Host occasionally a kvm crash and get stuck and wont respond. And more importantly i am able to crash the entire routeros host ( dell box ) if i start and stop the Traffic generator many times off and on in ...
by coffeecoco
Tue Dec 25, 2012 12:40 pm
Forum: General
Topic: Issue: with config lost
Replies: 2
Views: 626

Issue: with config lost

Is there any known issues with partial config go missing from a functional ros? I run my ros from a usb dongle if that could be the issue ? Ive had this happen to me a few times on differnet machines I first thought it was the v6 beta but i have a tottaly different machine now on version 5.22 x86 on...
by coffeecoco
Tue Dec 25, 2012 12:16 am
Forum: Virtualization
Topic: Hyper-V integration components
Replies: 127
Views: 66683

Re: Hyper-V integration components

It seems to me that MK is just ignoring the customers it has currently and saying we will never touch it. Sorry but I have repeatedly said that we have no plans to make HyperV support. Yes, and like the poster that you answer here I will now also look for alternatives. Your religious war interferes...
by coffeecoco
Tue Dec 25, 2012 12:14 am
Forum: Virtualization
Topic: Hyper-V integration components
Replies: 127
Views: 66683

Re: Hyper-V integration components

Full support oа ESXi is good too :) Is there any more ways for me like a customer to vote for that feature? Mtik make a cloud core router, whithout any idea from customers how to use it, but ignor real cloud problem with virtual routers. i apologize mik staff, but this guy is right, from a biz pers...
by coffeecoco
Mon Dec 24, 2012 8:49 am
Forum: Virtualization
Topic: LOL junos in KVM
Replies: 2
Views: 2296

Re: LOL junos in KVM

Actually I did manage to get an interface to come up, with the KVM interface model=e1000 But It wasn't functional under junos for some reason It seems that junos has a watchdog and it could also see issues em0: watchdog timeout -- resetting Em0 is the interface name under junos, i dont know why its ...
by coffeecoco
Mon Dec 24, 2012 5:21 am
Forum: Virtualization
Topic: LOL junos in KVM
Replies: 2
Views: 2296

LOL junos in KVM

junos-olive.jpg
Unfortunately I wasn't able to get a interface to appear
by coffeecoco
Fri Dec 21, 2012 11:18 pm
Forum: General
Topic: Preventing fysical loop...
Replies: 10
Views: 4696

Re: Preventing fysical loop...

mikrotik has stp and rstp i don't understand it should work perfectly fine, probably advisable to enable it on all switch's

i would be shocked if it didn't work as intended
by coffeecoco
Tue Dec 18, 2012 7:16 pm
Forum: General
Topic: some help on static ip config
Replies: 3
Views: 781

Re: some help on static ip config

are those ip's the actual ips? if yes it appears that they are doing the natting not you. btw Usually most of the time, the Lower the number is the carrier. most case's .1 carrier .2 CE btw my isp configured a nat on the local address to go on the static one So they are 1:1 natting the local ip to a...
by coffeecoco
Tue Dec 18, 2012 7:07 pm
Forum: General
Topic: How to pass traffic throuhg vpn
Replies: 2
Views: 776

Re: How to pass traffic throuhg vpn

so the lan address's are the same on both sides of the networks? if thats the case you need to make it a bridged vpn if each side of the networks is on a different subnet then you need to add routes so that both sides know about each other. eg. a-b-c-d a cant get to d so you add a route on b telling...
by coffeecoco
Tue Dec 18, 2012 6:15 pm
Forum: General
Topic: NATted connections have RST packet sent to LAN for no reason
Replies: 11
Views: 3099

Re: NATted connections have RST packet sent to LAN for no re

does the issue dissapear when you turn off upnp ? Nope. I dont understand the situation enough but, im going to take a guess it has something todo with your double nat you said the isp is natting as you are also? It could be a) your natting when your supposed to be. just pass the packets to the REA...
by coffeecoco
Tue Dec 18, 2012 5:56 pm
Forum: General
Topic: winbox for mac os x 10.8
Replies: 15
Views: 3078

Re: winbox for mac os x 10.8

allow me to assist <-- mac lover haha goto settings> security> general, change "allow all applications" fixed other issue is montain lion update removed X11 if you still get errors install this ALSO http://xquartz.macosforge.org/landing/ it contains the X11 binaries. the end Oh and forget about bein...
by coffeecoco
Tue Dec 18, 2012 5:52 pm
Forum: General
Topic: (Exclusively) Vaccine shot for Mikrotik against ADS+banners
Replies: 3
Views: 14276

Re: (Exclusively) Vaccine shot for Mikrotik against ADS+bann

brb fingers tired from scrolling.
by coffeecoco
Tue Dec 18, 2012 5:50 pm
Forum: RouterBOARD hardware
Topic: New tiltmount for sextant by RF elements
Replies: 3
Views: 1340

Re: New tiltmount for sextant by RF elements

zippy ties huh.. :P is this a do or do not thread :P
by coffeecoco
Tue Dec 18, 2012 5:02 pm
Forum: General
Topic: NATted connections have RST packet sent to LAN for no reason
Replies: 11
Views: 3099

Re: NATted connections have RST packet sent to LAN for no re

does the issue dissapear when you turn off upnp ?
by coffeecoco
Tue Dec 18, 2012 3:57 pm
Forum: General
Topic: NATted connections have RST packet sent to LAN for no reason
Replies: 11
Views: 3099

Re: NATted connections have RST packet sent to LAN for no re

Hi, I have a RB450G between a small office LAN (10-20 users) and a 100Mb ISP line to the Internet. Since some time connections started being dropped after a certain amount of time. A RST packet is generated on the router and sent to my LAN host. The other host doesn't notice the connection has gone...
by coffeecoco
Fri Dec 14, 2012 3:21 pm
Forum: Scripting
Topic: Layer7: DNS Pattern to catch only .CC domains
Replies: 4
Views: 1772

Re: Layer7: DNS Pattern to catch only .CC domains

why would u want to catch .cc domains? i have one
by coffeecoco
Wed Dec 05, 2012 2:11 pm
Forum: General
Topic: IPSec Tunneling and Subneting problem
Replies: 6
Views: 1255

Re: IPSec Tunneling and Subneting problem

I suppose you can create a Hub like topology all sites tunnel into main
Clients connect to Hub, I wouldn't a good result for voip calls over Sat tho.

i cant make sense of you tho your hard to understand
draw pic ?
by coffeecoco
Wed Dec 05, 2012 1:54 pm
Forum: General
Topic: topic ROS 6.0rc5?
Replies: 10
Views: 2726

Re: topic ROS 6.0rc5?

news update 6.0rc5 I assure you will be different from 6.0rc4
oh man i shud get karma for this :D
by coffeecoco
Wed Dec 05, 2012 1:47 pm
Forum: General
Topic: IPSec Tunneling and Subneting problem
Replies: 6
Views: 1255

Re: IPSec Tunneling and Subneting problem

agree'd he must be natting
by coffeecoco
Mon Dec 03, 2012 7:22 am
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM Horrible front/label design!!!
Replies: 14
Views: 4933

Re: RB2011UAS-RM Horrible front/label design!!!

pics or it didnt happen I don't think he needs to prove something to you. Chill mang im just playing with you. dont be so offended A pic would be a nice display of the problem at hand, no one ordered you to, or asked you to prove it, do what ever the hell you want! i dont give to shits A pic would ...
by coffeecoco
Sun Dec 02, 2012 4:39 am
Forum: RouterBOARD hardware
Topic: RB2011UAS-RM Horrible front/label design!!!
Replies: 14
Views: 4933

Re: RB2011UAS-RM Horrible front/label design!!!

pics or it didnt happen
by coffeecoco
Tue Nov 27, 2012 11:00 am
Forum: Forwarding Protocols
Topic: Stuck Routes on Route Cache
Replies: 103
Views: 44900

Re: Stuck Routes on Route Cache

Staff i have been trying to fix a little issue i had i was basicly adding static routes and removing them and re creating nats and so forth, and some where along the line one of the routes i am certain of got stuck, but it was not in the route table it took a reboot to clear the mysterious issue. I ...
by coffeecoco
Mon Nov 19, 2012 12:58 pm
Forum: General
Topic: Panasonic behind Mikrotik... SIP
Replies: 7
Views: 4914

Re: Panasonic behind Mikrotik... SIP

I'm tried /ip firewall service-port disable sip IP-Phone/3cxPhone6 can't complete registration on station (Authentication failed) In packets i see internal IP of Panasonic, i need to change it to external ip Yes that is the exact problem when you mix SIP with NAT Expect pain and frustration if you ...
by coffeecoco
Mon Nov 19, 2012 11:14 am
Forum: General
Topic: Panasonic behind Mikrotik... SIP
Replies: 7
Views: 4914

Re: Panasonic behind Mikrotik... SIP

sip is such a terrible service when mixed with NAT
I see it ALL the time..... life becomes much simple and easy if you create "bridge's" or "VPN's" or Routed networks


Avoid NAT and it all starts to be easy.
by coffeecoco
Thu Nov 15, 2012 10:05 am
Forum: RouterBOARD hardware
Topic: SFP stats signal query
Replies: 1
Views: 880

SFP stats signal query

Hi all so I've been doing reading that mikrotik has enabled the view of stats such as signal , power , distance, wavelength etc via the router. I do these tests with a proper TDR and fibre modules So I learned recently this requires sfp to have extended diagnostics called ddmi Please confirm this ? ...
by coffeecoco
Tue Oct 16, 2012 1:14 pm
Forum: General
Topic: HUge POrt Flap!
Replies: 14
Views: 2380

Re: HUge POrt Flap!

"You are seeing visions, it is not happening." Frankly you do not have any other option than to by a new set of equipments, because MT is not (active nor willing) to take that issue seriously. http://forum.mikrotik.com/viewtopic.php?f=2&t=54038 We have not seen this issue once in our testing lab. A...
by coffeecoco
Sat Oct 06, 2012 5:16 am
Forum: RouterBOARD hardware
Topic: So, ah, Cloud Core Router CCR1036 Shipping Date? Please...
Replies: 115
Views: 29251

Re: So, ah, Cloud Core Router CCR1036 Shipping Date? Please.

My 5 cents. If there were any good information or stats available on or around the date it was released OR made available to public And im talking something more than a random Youtube video it would cut down the negativity, grow up , just because someone is negative dont mean you need to put them in...
by coffeecoco
Sun Aug 26, 2012 2:00 pm
Forum: General
Topic: v6.0beta3 x86 - lost ethernet interface, driver issue?
Replies: 5
Views: 3000

Re: v6.0beta3 x86 - lost ethernet interface, driver issue?

If anyone is looking for confirmation that this is an issue I have the same issue on my x86 board none of the ethernet interfaces showed but the wlan did. below is a copy of the PCI when i reverted it back to 5.X # DEVICE VENDOR NAME IRQ 0 04:07.0 Realtek Semiconductor Co., ... RTL-8110SC/8169SC Gig...
by coffeecoco
Tue Jul 03, 2012 5:14 am
Forum: Scripting
Topic: Minecraft server Gamai.Ru DDOS protection
Replies: 14
Views: 6872

Re: Minecraft server Gamai.Ru DDOS protection

Okay, then must be either simple ping flood Or unspoofed syn flood <--pointless i would think, but it might consume a bit of the resources maybe.. I personaly dont consider a dos very bad, I cant think how a dos would be capable of consuming your bandwidth AND OR resources. but of coarse I guess the...
by coffeecoco
Mon Jul 02, 2012 3:21 pm
Forum: General
Topic: spanning tree mikrotik + Cisco issue
Replies: 1
Views: 1088

spanning tree mikrotik + Cisco issue

Hi, today i Built a cisco router todo some testing, i then simple pluged one of the access ports into my mikrotik which is just a 5 port bridge, with ether1 as the link to my network/internet simple right? my network/internet has a bunch of vlans of all sorts. by default the 878 cisco router was set...
by coffeecoco
Mon Jul 02, 2012 2:29 pm
Forum: Scripting
Topic: Minecraft server Gamai.Ru DDOS protection
Replies: 14
Views: 6872

Re: Minecraft server Gamai.Ru DDOS protection

May i ask you have you already had ddos attacks?

Can you tell me anything about the previous attacks, I would be surprised if the cpu on the router can handle a large ddos attack,
I dont know personaly with mikrotik, i've just seen some tuff routers go splat in the past.

please give feedback :)
by coffeecoco
Sat Jun 23, 2012 4:03 pm
Forum: General
Topic: Licence Question
Replies: 5
Views: 969

Re: Licence Question

yes but i assume the 411 already has a licence yea? so it would just be an upgrade ?
by coffeecoco
Sat Jun 23, 2012 8:25 am
Forum: General
Topic: Prioritize VoIP - post your ideas
Replies: 26
Views: 21316

Re: Prioritize VoIP - post your ideas

If you are the DSL provider, you typically control from the customer all the way to the upstream. You can engineer your network (hopefully) for VoIP and do QoS etc etc. If you buy DSL from someone else, you have no control over how they handle the packets and your latency and jitter can be unpredic...
by coffeecoco
Fri Jun 22, 2012 5:46 pm
Forum: General
Topic: Looking for a MINI ITX case that has 3x3 mimo ports
Replies: 0
Views: 436

Looking for a MINI ITX case that has 3x3 mimo ports

I am looking for a case suitable to have 3 holes drilled into it in a NEAT way Or a case that has already provision for 3x holes for a 3x3 mimo I currently have http://www.mini-box.com.au/M350%20Universal%20Mini-ITX%20enclosure.html but really no where to drill holes. anyone have anything pics or li...
by coffeecoco
Fri Jun 22, 2012 4:14 pm
Forum: General
Topic: Prioritize VoIP - post your ideas
Replies: 26
Views: 21316

Re: Prioritize VoIP - post your ideas

Routing with DSL not an option ? Unless you only work in wireless solutions, I work as a data/field engineer for an ISP, I specialize in managed VPN's, most of the vpn's we provide are on private subnet's pretty much unlimited IP's eg. 1x PBX that goes over multiple sites, this is what VoIP pbx's tr...
by coffeecoco
Wed Jun 20, 2012 4:53 pm
Forum: General
Topic: Prioritize VoIP - post your ideas
Replies: 26
Views: 21316

Re: Prioritize VoIP - post your ideas

high priority, dont buffer voip, sip h323, usually small packets I I used to be a pbx engineer, on a network with more than roughly 50 hosts, rule of thumb was setup vlans to reduce broadcast traffic. Comercially, On-net routing packets over the backbone of an ISP, It is very highly advisable to rou...
by coffeecoco
Wed Jun 20, 2012 3:38 pm
Forum: General
Topic: [SOLVED] Two subnets on different interfaces communication problem
Replies: 9
Views: 5775

Re: Two subnets on different interfaces communication proble

yes from the router you will be able to ping everything the reason why one if them wont is because you created a VRF under routes there is a VRF tab you might want to delete some of that stuff then, go to the PC on the LAN you want to use to talk to the other subnets i dont know what you use but for...
by coffeecoco
Wed Jun 20, 2012 2:57 pm
Forum: General
Topic: [SOLVED] Two subnets on different interfaces communication problem
Replies: 9
Views: 5775

Re: Two subnets on different interfaces communication proble

wait i see it. Do you really need a VRF ? if you dont then the VRF part is in the routes window delete all the stuff you added, unless you need it ? a VRF allows you to create completly seperate routes that are sub managed in the router I use them at work all the time. Its like a seperate routing zo...
by coffeecoco
Wed Jun 20, 2012 2:27 pm
Forum: General
Topic: [SOLVED] Two subnets on different interfaces communication problem
Replies: 9
Views: 5775

Re: Two subnets on different interfaces communication proble

do you have rip enabled or any other routing proticols ospf etc
im taking a guess you have Rip enabled ? just untick all the box's and remove them

or goto to terminal type routing > rip > export and paste it here
the D in the routes means its dynamic which is usualy created by a routing protocol
by coffeecoco
Wed Jun 20, 2012 12:39 pm
Forum: General
Topic: [SOLVED] Two subnets on different interfaces communication problem
Replies: 9
Views: 5775

Re: Two subnets on different interfaces communication proble

751_communication_problem.jpg LAN1: bridge-local (wan+lan1) with dhcp server and pool LAN2: Ethernet-port with dhcp server and pool Both LANs have internet access. The problem is that I cannot ping devises from different networks (networks cannot communicate)… I can only ping the gateways. From 10....
by coffeecoco
Wed Jun 20, 2012 12:02 pm
Forum: Wireless Networking
Topic: MIMO 3x3
Replies: 38
Views: 23806

Re: MIMO 3x3

i did a bit of reading and learned that different numbers in the MCS act differently some are 2 spatial beams and i assume the higher ones are 3 spatial beams, is this correct?
im going to try this next to change to the high MCS only


any feedback?
by coffeecoco
Wed Jun 20, 2012 11:04 am
Forum: Wireless Networking
Topic: MIMO 3x3
Replies: 38
Views: 23806

Re: MIMO 3x3

okay so i got micro atx atom board with 2.2ghz 2gig ram 3x3 mimo mini pci-e I tried with hyperthreading =4 dual = 2 and single = 1 one 1 core using btest to the router, i looked at resources>cpu and it maxed out dualcore it seems to use mostly 1 core for the btest alone on average i could see 260mb/...
by coffeecoco
Sun Jun 17, 2012 6:34 pm
Forum: General
Topic: dual WAN dual LAN no nat setup
Replies: 1
Views: 2040

Re: dual WAN dual LAN no nat setup

can u draw a picture? i know that there is a rule with routing called a defined route if im correct eg. 10.10.10.0 lets say you have two wan interfaces you can set 1 interface with 2 x /25 and the second wan with /24 because the /24 contains the 2 x /25 if im correct i could have it backwards but th...
by coffeecoco
Sun Jun 17, 2012 6:10 pm
Forum: General
Topic: 2 PPPOE client sessions on one WAN connection?
Replies: 5
Views: 1955

Re: 2 PPPOE client sessions on one WAN connection?

check ur routes im guessing
perhaps a default route is overriding the access to the other modem?
by coffeecoco
Sun Jun 17, 2012 5:42 pm
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 91674

Re: New Ethernet port flap issue enquiery, PLS JOIN!

I already informed in this forum months ago that 90% of ALL my port flaps happen during daytime hours. Over night it is a very rare event. Interesting - from my point of view it happens mostly during sunny days, no matter what the temperature is. I don't have a disconnection for about a week - it i...
by coffeecoco
Tue Jun 05, 2012 6:08 pm
Forum: Wireless Networking
Topic: MIMO 3x3
Replies: 38
Views: 23806

Re: MIMO 3x3

Hi all After few tests - I can write some conclusion. Cards are awsome :-) With good antennas can work with more than 200Mb real network throughput. In bad envoironment, where much noise is, cards work better than old MIMO 2x2. They can work with QAM16 modulation with higher MCS. just ordered mine ...
by coffeecoco
Tue Jun 05, 2012 3:39 pm
Forum: General
Topic: pptp interfaces and vrf
Replies: 6
Views: 3923

Re: pptp interfaces and vrf

Hi mate how ya going I wanted to comment on the vrf question I am no way an expert but I am certainly a mikrotik homosexual :P joke I think what you need to be thinking is correct me if im wrong but just because a router provides the VRF routing imagine it as a private road for someone just cuz the ...
by coffeecoco
Thu May 31, 2012 4:13 pm
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 91674

Re: New Ethernet port flap issue enquiery, PLS JOIN!

i'm just curious and throwing idea's around has anyone "manually set the duplex" and had port flap issues? Also ethernet sends 2 sets of voltage down ethernet if i remember 5 volt = 1 and 1-2 something = 0 I have just wondered if its a lack of power delivery? OR Faulty Capacitors If im correct the v...
by coffeecoco
Thu May 31, 2012 3:41 pm
Forum: General
Topic: IS there any common port forwarding problems
Replies: 1
Views: 500

Re: IS there any common port forwarding problems

fixed dam unup was enabled screwed it all up
by coffeecoco
Thu May 31, 2012 5:13 am
Forum: General
Topic: IS there any common port forwarding problems
Replies: 1
Views: 500

IS there any common port forwarding problems

The simple portforward will not work for me im forwarding an Ip from a pptp connection to a local ip on a NAT very very simple Flags: X - disabled, I - invalid, D - dynamic 0 chain=srcnat action=masquerade src-address=0.0.0.0/0 out-interface=DSC 1 chain=dstnat action=dst-nat to-addresses=192.168.10....
by coffeecoco
Fri May 25, 2012 8:58 am
Forum: The Dude
Topic: Routeros x86 + Dude
Replies: 7
Views: 3464

Re: Routeros x86 + Dude

Saying that i can with out a doubt install+licence then format and then install+existing licence yes, i am pretty sure i have checked before but i want to be sure.
by coffeecoco
Fri May 25, 2012 8:11 am
Forum: The Dude
Topic: Routeros x86 + Dude
Replies: 7
Views: 3464

Re: Routeros x86 + Dude

in relation to my other question
if i install routeros on a x86 vmware
can i then wipe the drive and reinstall it to the hhd if i purchase a licence?
i want to test it multiple ways
by coffeecoco
Fri May 18, 2012 10:11 am
Forum: The Dude
Topic: Routeros x86 + Dude
Replies: 7
Views: 3464

Re: Routeros x86 + Dude

Anything i can do to help?
by coffeecoco
Fri May 18, 2012 10:06 am
Forum: The Dude
Topic: Routeros x86 + Dude
Replies: 7
Views: 3464

Routeros x86 + Dude

I just want to make it loud and clear to mikrotik staff that the Issue with Routeros + the dude NPK package that will not allow http access ( port 81 ) known issue <-- This is preventing me purchasing a license to install on my high powered Atom x86 machine! I know I know use Windows, but seriously ...
by coffeecoco
Wed May 02, 2012 4:44 pm
Forum: Wireless Networking
Topic: 802.11n 3x3 with 3SS
Replies: 7
Views: 2626

Re: 802.11n 3x3 with 3SS

why cant i find the english version of that, i changed the site to english only but the product vanished

trying to work out what they done here
by coffeecoco
Wed May 02, 2012 4:36 pm
Forum: Wireless Networking
Topic: WDS-slave mode not for 3rd party AP's?
Replies: 16
Views: 5110

Re: WDS-slave mode not for 3rd party AP's?

hmm, so station-client mode (in MT terminology this would be "AP-bridge/bridge-station" mode) is something MT cannot do? What is a radio actually doing when in this 'repeater' function? Is the radio simply switching between AP and Client-station mode each cpu cycle? I have a Ruckus router that is e...
by coffeecoco
Wed May 02, 2012 4:34 pm
Forum: Wireless Networking
Topic: WDS-slave mode not for 3rd party AP's?
Replies: 16
Views: 5110

Re: WDS-slave mode not for 3rd party AP's?

Why is that? Can somebody explain why a € 30,- repeater from China can do what I don't seem to be able to make a RB751U-2HnD do? It would make a great funcion for these boxes if with only one radio (=cheap and no interference) an outdoor SSID can be reproduced in strength for indoor use. If the sig...
by coffeecoco
Wed May 02, 2012 12:33 pm
Forum: Beginner Basics
Topic: log - reassociating , disconnected,ok , connected
Replies: 65
Views: 25142

Re: log - reassociating , disconnected,ok , connected

Guys I read this gentleman's Post and i gave it ago and OMG it tottaly!!!!! FIXED the issue!!! All i did was disable apply, then enable apply default-authentication ?? chance? i think not, issue resolved yes!! as you can see im excited, and i want to thank this guy for sharing, i would like to anoun...
by coffeecoco
Sat Apr 28, 2012 3:52 pm
Forum: General
Topic: Portal hijack
Replies: 6
Views: 1174

Re: Portal hijack

If they are being caught and redirected to your hotspot login page, then that means that they are somehow connected to your layer2 quest network and being caught by the hotspot functionality. Do you see extra hosts in your hosts table that you can't account for, like with wrong IP settings? The oth...
by coffeecoco
Wed Apr 25, 2012 5:40 am
Forum: General
Topic: Portal hijack
Replies: 6
Views: 1174

Re: Portal hijack

If they are being caught and redirected to your hotspot login page, then that means that they are somehow connected to your layer2 quest network and being caught by the hotspot functionality. Do you see extra hosts in your hosts table that you can't account for, like with wrong IP settings? The oth...
by coffeecoco
Tue Apr 24, 2012 12:26 pm
Forum: General
Topic: Portal hijack
Replies: 6
Views: 1174

Re: Portal hijack

lol, imo probably a wrong static route on the PE?
if they blame you, laugh loudly and as you hang up the phone lol.
by coffeecoco
Sun Apr 22, 2012 7:02 am
Forum: Wireless Networking
Topic: Recommend me some wireless equipment for my topology
Replies: 3
Views: 1037

Re: Recommend me some wireless equipment for my topology

so after reading what i just said So now decide how you want to set it up I dont recoment using omni to blanket coverage the area, they dont really go as far as you might want i would recomend A Main AP with SXT bridge, then hang a couple of directional antenna's off another board facing the area's ...
by coffeecoco
Sun Apr 22, 2012 6:48 am
Forum: Wireless Networking
Topic: Recommend me some wireless equipment for my topology
Replies: 3
Views: 1037

Re: Recommend me some wireless equipment for my topology

Hey I have found that if you have devices that roam between spots say a guy walks with his reader from point A to point B if its setup as WDS he can seemlessly roam between area's and not have to reconnect to the local accesspoint catch is regardless if its WDS or just AP's if there are black spots ...
by coffeecoco
Sun Apr 22, 2012 6:34 am
Forum: General
Topic: Load sharing per packet - RouterOS 6 - linux-2.6.38.2?
Replies: 4
Views: 2424

Re: Load sharing per packet - RouterOS 6 - linux-2.6.38.2?

sounds like a round-robin? cant the firewall do this?

with the exception rules for https traffic
by coffeecoco
Fri Apr 20, 2012 3:23 am
Forum: General
Topic: External SIP server. No incoming sound.
Replies: 8
Views: 5950

Re: External SIP server. No incoming sound.

If you've got any Ubiquiti device between your phones and internet, be sure to disable de 4 check-boxes below NAT (SIP, H323....) Also, as JJCinAZ said, disble NAT helper IP > Firewall > Service ports and disable SIP. If you use H323 protocol, disable it also. If you can, use a different local port...
by coffeecoco
Fri Apr 20, 2012 3:14 am
Forum: Beginner Basics
Topic: Mikrotik RB711U, ROS-5.14 NAT issues for SIP to VoIP carrier
Replies: 10
Views: 7052

Re: Mikrotik RB711U, ROS-5.14 NAT issues for SIP to VoIP car

Man reading the same old thing in every post about sip nat issues cries me to tears and i start slashing my wrist when a mod says " just enable sip helper it works thats it" that just makes me wanna murder my neighbours cat! I would like to hear someone say a CLEAR expalination of what SIP HELPER DO...
by coffeecoco
Mon Apr 16, 2012 1:39 pm
Forum: Forwarding Protocols
Topic: help
Replies: 19
Views: 2984

Re: help

^ your name oxid, makes the hair on my back tingle
by coffeecoco
Thu Apr 12, 2012 11:35 am
Forum: General
Topic: Really small low powered mini itx board
Replies: 0
Views: 493

Really small low powered mini itx board

http://www.linuxtech.net/reviews/int...ower_draw.html Total power draw 10W to 11W. You can put a mSATA SSD in one of the slots for a fully embedded system on one board... It doesn't even need a case if you put it on a non conductive backplate and install that backplate on a DIN rail in a NEMA4/IP66 ...
by coffeecoco
Thu Apr 12, 2012 10:44 am
Forum: General
Topic: Error ? "item changed"
Replies: 8
Views: 1388

Re: Error ? "item changed"

11:05:47 system,info item changed 11:35:47 system,info item changed 12:05:47 system,info item changed 12:35:47 system,info item changed 13:05:47 system,info item changed 13:35:47 system,info item changed 14:05:47 system,info item changed 14:35:47 system,info item changed 15:05:47 system,info item ch...
by coffeecoco
Wed Apr 11, 2012 12:53 pm
Forum: General
Topic: Syn Flood Protection for ISP
Replies: 6
Views: 8546

Re: Syn Flood Protection for ISP

Ive had more than my fair share of isp level ddos attacks syn floods etc You would be a very happy man if your isp have you a level of dropping the packets before forwarding to you, but ive seen "individuals" just smash the router the isp uses, and take out the whole isp My best advice is , TRY your...
by coffeecoco
Wed Apr 11, 2012 12:44 pm
Forum: General
Topic: Error ? "item changed"
Replies: 8
Views: 1388

Re: Error ? "item changed"

pic too small, can't read log.
Right click view, then single click to zoom (firefox)
by coffeecoco
Tue Apr 10, 2012 12:16 pm
Forum: General
Topic: Error ? "item changed"
Replies: 8
Views: 1388

Re: Error ? "item changed"

lol indeed, rebooted router havnt seen any more in the logfiles
by coffeecoco
Sun Apr 08, 2012 11:49 am
Forum: General
Topic: Error ? "item changed"
Replies: 8
Views: 1388

Re: Error ? "item changed"

I've searched but didnt find any answers
its odd?
by coffeecoco
Sat Apr 07, 2012 5:35 pm
Forum: General
Topic: Error ? "item changed"
Replies: 8
Views: 1388

Error ? "item changed"

can someone tell me what this is?
by coffeecoco
Sat Feb 11, 2012 5:49 pm
Forum: General
Topic: The way to set Mikrotik into GOD mode..New secrets revealed!
Replies: 22
Views: 8709

Re: The way to set Mikrotik into GOD mode..New secrets revea

So much lols zomg

BTW that youtube vid of WPA hacking.. is a joke, lmao
by coffeecoco
Sun Dec 11, 2011 2:33 am
Forum: General
Topic: IPv6 Internal webserver
Replies: 2
Views: 515

Re: IPv6 Internal webserver

[admin@Home] /ipv6> address print Flags: X - disabled, I - invalid, D - dyna # ADDRESS 0 DL fe80::20c:42ff:fea2:b928/64 1 DL fe80::20c:42ff:fea2:b929/64 2 DL fe80::27/64 3 G 2001:44b8:217d:8300::/64 4 G 2001:44b8:217d:8302::/56 [admin@Home] /ipv6> [admin@Home] /ipv6> route pr Flags: X - disabled, A...
by coffeecoco
Sat Dec 10, 2011 4:44 pm
Forum: General
Topic: IPv6 Internal webserver
Replies: 2
Views: 515

IPv6 Internal webserver

Ive upgrade to 5.10 which has fixed a problem ive had for ppp ipv6 from my isp i have assigned my internal pc an ip from the block given by my isp i can ping any ipv6 OUT from internal computer but i can get zero traffic inbound to that ipv6 address i cant ping from a remote server to my ipv6 pc, on...
by coffeecoco
Wed Nov 30, 2011 3:39 pm
Forum: General
Topic: RouterOS v5.9 released
Replies: 166
Views: 45511

Re: RouterOS v5.9 released

Here anyway for what its worth 23:37:59 pppoe,ppp,debug,packet <name dano1980@ipv6.internode.on.net> 23:38:02 pppoe,ppp,debug,packet Internode DYN: sent CHAP Response id=0x45 23:38:02 pppoe,ppp,debug,packet <response len=10> 23:38:02 pppoe,ppp,debug,packet <name dano1980@ipv6.internode.on.net> 23:38...
by coffeecoco
Wed Nov 30, 2011 3:37 pm
Forum: General
Topic: RouterOS v5.9 released
Replies: 166
Views: 45511

Re: RouterOS v5.9 released

inncom, why not just copy logs in plaintext form from the terminal? also, MRZ implied that we need logs from the ISP side too ...
I know... so you do want to see the plain text log, will it help ?
by coffeecoco
Wed Nov 30, 2011 3:33 pm
Forum: General
Topic: RouterOS v5.9 released
Replies: 166
Views: 45511

Re: RouterOS v5.9 released

Image

Not what you asked for but maybe help?
by coffeecoco
Wed Nov 30, 2011 3:17 pm
Forum: General
Topic: RouterOS v5.9 released
Replies: 166
Views: 45511

Re: RouterOS v5.9 released

Your on to something buddy!
by coffeecoco
Wed Nov 30, 2011 2:53 pm
Forum: General
Topic: RouterOS v5.9 released
Replies: 166
Views: 45511

Re: RouterOS v5.9 released

I keep refreshing this page, just with a little hope that ppp ipv6 is functioning, but i think its def broke ? anyone else? Im with Internode, like the other guys here. Native 'dual-stack' IPv4 and IPv6 enabled : When you login, you will be assigned, via a dual-stack IPv4/IPv6 PPP session: - Your ex...
by coffeecoco
Mon Nov 07, 2011 12:43 pm
Forum: The User Manager
Topic: Userman 5.0 Generate Voucher
Replies: 1
Views: 1299

Re: Userman 5.0 Generate Voucher

Did you fix this or anyone know, im having this problem and its driving me insane

i have upgrade downgraded removed userman reinstalled userman( even deleted userman from stores) still happening i changed browsers same deal



please anyone with any clue ?
by coffeecoco
Thu Sep 21, 2006 7:47 am
Forum: General
Topic: how to recover my licence from damaged drive
Replies: 2
Views: 1366

how to recover my licence from damaged drive

how to recover my licence from damaged drive, and install it onto a new drive.
my old hard drive dont work any more. i bought my key from a reseller and they dont know what to do they said i have to buy another one. i dont have an account server, what do i do?
by coffeecoco
Fri Sep 15, 2006 1:13 am
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

your missing code thats why. there is some mangle code your missing copare it to the link provided on the wiki. mangle rules are missing some code Isn't missing anything! that is the configuration of load balance without Persistent Sessions .... http://wiki.mikrotik.com/wiki/Load_Balancing Yea sorr...
by coffeecoco
Thu Sep 14, 2006 12:58 am
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

your missing code thats why. there is some mangle code your missing copare it to the link provided on the wiki.

mangle rules are missing some code
by coffeecoco
Wed Sep 13, 2006 2:03 pm
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

I honestly tried doing port based ip based even ip range based due to some reason there seems to be a few ip's vonage use for voip still not work, then i was understood that he has 3 modems that dial the pppoe so i began to work out maybe there needs to be port forwarding im not sure. from what i ca...
by coffeecoco
Wed Sep 13, 2006 9:14 am
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

whoops can u goto the mangle rules and re enable the ones that are disabled hehe sorry
by coffeecoco
Wed Sep 13, 2006 12:04 am
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

chain=prerouting in-interface=Local protocol=tcp dst-port=443
action=mark-connection new-connection-mark=even passthrough=yes
by coffeecoco
Mon Sep 11, 2006 5:23 am
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

Hmm, one thing i didnt find in this thread is the fact that you must not set default route, when using dhcp or such other meathods, kind of strange dont you think to have 2 default routes ?
by coffeecoco
Sat Jul 01, 2006 7:18 am
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

chain=prerouting in-interface=Local protocol=tcp dst-port=443
action=mark-connection new-connection-mark=even passthrough=yes


for example
by coffeecoco
Wed Jun 14, 2006 3:09 pm
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

can some one mod this so that it works with 3 gateways now? i have 3 uplinks i figure i got to adjust this some how but i dont know
nth=1,1,0
by coffeecoco
Fri Jun 09, 2006 3:05 pm
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

THANKS! Gerard this one works.

add chain=prerouting protocol=tcp dst-port=443 action=mark-connection \
new-connection-mark=even passthrough=yes comment="" disabled=no

added it in order right after the odd mangle rule and wam it works
by coffeecoco
Fri Jun 09, 2006 12:59 pm
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

Netcomm NB750 solves all these problems by binding any destination port via 443 to always use eg. WAN1 or WAN2 optional also some other options of wan1 first or wan2 first port 443 bind to a wan port tottal fixed everything if that can be fixed that simple like netcomm do that would be great for us ...
by coffeecoco
Fri Jun 09, 2006 12:57 pm
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

Just for kicks i got a feeling of how it works it logs the ip address and clients ip and saves that client to use a wan port for each ip they connect to.. eg. of problem if this is correct i have a multithreaded newsgroup client that conencts to 1 news server and downloads a sigle file multithreaded...
by coffeecoco
Fri Jun 09, 2006 12:53 pm
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

how does this script work does it keep the specific wan port set for each ip the client connects to? or how does this solve the banking issue ? Well, MY banking and MY instant messaging works, and that is my only point of concern :) Indeed, as Christian has pointed out, it does round-robin on all co...
by coffeecoco
Fri Jun 09, 2006 12:47 pm
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

cmit So whould it be right to say that your individual script spreads users evenly over the (2) links eg. 10 users on wan1 10 users on wan2 im taking this is the way your individual script works im taking it that interigating yours with the one pasted above is different? there for users cant utilize...
by coffeecoco
Fri Jun 09, 2006 10:52 am
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

Eugene looking really go so far mate what can we do about this other part about links going down
by coffeecoco
Fri Jun 09, 2006 10:50 am
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

So whats next to fix the link down issue? and which script needed polishing? so far so good i added the script a dozen times now it works as far as using 2 ip's download managers threading works 2 links are being used. If one of the link goes down does it mean that some traffic won`t be routed at al...
by coffeecoco
Fri Jun 09, 2006 8:46 am
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

Guee i will have to test this, just a curious question does this work if i wanted to use a pppo3 client on the MT? or must I set my modem as pppoe and DHCP the MT? The online banking issue it can be solved simply with some kind of binding to a wan port? like bind port 445 to wan1 just the same as th...
by coffeecoco
Thu Jun 08, 2006 1:22 am
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

Yes of coarse MLPPP but there is no ISP in australia that supports it although its still good to have that also.


So $600 dollars guys.
by coffeecoco
Wed Jun 07, 2006 1:31 pm
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

Yes i know about the ssl with online banking my netcomm router can specify a perticular route for port 443 ssl connections thats is easy fixed IM is UDP i think i never have a problem with IM in any way but im sure it can be fixed if we bind the IM to a wan port.



So who wants this ?
by coffeecoco
Wed Jun 07, 2006 12:56 pm
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

Re: simple load balancing

I tried this but when i use my threaded download manager 1 link only gets used. my whole plan is to use a download manager so when the second thread opens it most likly will be on the second wan port. I cant explain why mine dont work, maybe it does partly but not very well at all, which brings me b...
by coffeecoco
Wed Jun 07, 2006 7:54 am
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

Ok well i guess thats 600 dollars in tottal any takers? nat would be needed I would have thought. I have a dual wan netcomm nb750 router it only works with NAT. but its only 2 wan ports and its not a MT router.


so we have 600 dollars so far.
by coffeecoco
Tue Jun 06, 2006 9:18 am
Forum: General
Topic: load balancing for my dual adsl
Replies: 124
Views: 28248

load balancing for my dual adsl

me to be lazy and ask some one to do it for me for who has sucessfully got it to work, i have 2 adsl lines possibly more if MT will work at all, there are 3 known methods that would worf for me: Session Weight round robin Dymamic Traffic I dont mind at all which of them they generaly create the same...
by coffeecoco
Mon May 22, 2006 1:50 pm
Forum: Scripting
Topic: How to limit a user to a given amount of traffic?
Replies: 85
Views: 81553

i tried the one on the wiki for que shaping and it didnt work i even set the timer for 10 secs and lowered the download limit my lan computers use 10.5.50. ip's i edited that it didnt change anything i dont know why any help ? must i add anything into the que manger before anything? http://wiki.mikr...
by coffeecoco
Sun Mar 19, 2006 11:48 am
Forum: General
Topic: 3rd party mac auth problem behind routeros
Replies: 2
Views: 674

3rd party mac auth problem behind routeros

i have a mikrotik routeros with some powerfull mini pci cards i want to use but im having issues with the mac authentication on the sputnik side of things, for example its always showing the mac id of the routeros( routeros box has 1 ethernet and a wireless card) how can the sputnik just auth the ma...
by coffeecoco
Sun Oct 23, 2005 3:02 pm
Forum: General
Topic: webproxy/proxy can i force users to use it?
Replies: 7
Views: 2624

yes, but i did what it says i can still pass traffic on websites i have blocked on thewebproxy
by coffeecoco
Sun Oct 23, 2005 2:05 pm
Forum: General
Topic: webproxy/proxy can i force users to use it?
Replies: 7
Views: 2624

webproxy/proxy can i force users to use it?
maybe with the hotspot system?

and how
by coffeecoco
Sun Oct 23, 2005 8:28 am
Forum: General
Topic: webproxy/proxy can i force users to use it?
Replies: 7
Views: 2624

please give me an idea how to force them MUST i do what u sugested netcomp ?with blocking port 80 ?
by coffeecoco
Sun Oct 23, 2005 4:05 am
Forum: General
Topic: webproxy/proxy can i force users to use it?
Replies: 7
Views: 2624

also does the cacheing system on default does it cache everything or MUST i specify what to cache i have it set to any ?
by coffeecoco
Sun Oct 23, 2005 4:04 am
Forum: General
Topic: webproxy/proxy can i force users to use it?
Replies: 7
Views: 2624

webproxy/proxy can i force users to use it?

webproxy/proxy can i force users to use it?
maybe with the hotspot system?
by coffeecoco
Wed Oct 12, 2005 1:19 pm
Forum: Scripting
Topic: Cable heartbeat login
Replies: 0
Views: 1103

Cable heartbeat login

my isp is telstra which is located in australia and they use a heartbeat login system can some one tell me how to implement this into the OS so that i can remain online connected to my cable modem ? my linksys router has heartbeat login built in