Community discussions

MikroTik App

Search found 110 matches

by jowi007
Tue Feb 22, 2011 8:42 am
Forum: Scripting
Topic: Script for lowering speed
Replies: 0
Views: 458

Script for lowering speed

I need pls a script to run in order to lower simple queue speed of customer who passed 200MB per day consumtion
i have one running successfully on 2.51 RouterOs
when i migrate to 4.16 RouterOs it is not working anymore

Any help pls ?
by jowi007
Fri Dec 17, 2010 8:58 pm
Forum: Scripting
Topic: Migrating script from 2.9.x to 5.x
Replies: 5
Views: 1497

Migrating script from 2.9.x to 5.x

:local traf; /queue simple :for i from=1 to= 254 do = { :if ([/queue simple find target-addresses=("172.18.1." . $i)] != "") do={ :set traf [get [find target-addresses=("172.18.1." . $i)] total-bytes] :if ($traf >262144000) do = { set [find target-addresses=("172.18.1." . $i)] max-limit=16000/64000 ...
by jowi007
Mon Jul 12, 2010 12:19 am
Forum: General
Topic: WAN OPTIMISATION
Replies: 1
Views: 541

WAN OPTIMISATION

Does mikrotik support wan compression and optimisation , ip packing is enought ?
anyone has good results with it ?

Regards
by jowi007
Mon Jul 12, 2010 12:10 am
Forum: General
Topic: Poor Bandwith Test Results
Replies: 6
Views: 1127

Re: Poor Bandwith Test Results

my issue solved when i set HW retries to 10 instead of 4 in advanced mode
i have stable bandwith test results

Thanks for your help
by jowi007
Mon Jul 12, 2010 12:07 am
Forum: RouterBOARD hardware
Topic: r52HN
Replies: 4
Views: 1133

Re: r52HN

My issue is solved when i set HW retries to 10 instead of 4 in advanced mode

thnx
by jowi007
Mon Jul 05, 2010 6:39 am
Forum: RouterBOARD hardware
Topic: r52HN
Replies: 4
Views: 1133

Re: r52HN

The cards make noise when we use nstreme and perfomance gets weak on Bwth test
and some of them just make heat without any settings , problems shows on rb433 will try the overheating ones on other boards , do u know any fimware to apply to the cards if this possible ?
by jowi007
Sun Jul 04, 2010 1:50 pm
Forum: General
Topic: Mikrotik, FreeRADIUS, MySQL, FreeSide
Replies: 13
Views: 3848

Re: Mikrotik, FreeRADIUS, MySQL, FreeSide

try
www.radcontrol.org
the best there is
by jowi007
Thu Jul 01, 2010 6:16 pm
Forum: RouterBOARD hardware
Topic: r52HN
Replies: 4
Views: 1133

r52HN

did anyone faced overheating with R52Hn cards ?
i am facing it with some 50 % of them any clue ?
by jowi007
Mon Jun 28, 2010 9:16 am
Forum: General
Topic: Poor Bandwith Test Results
Replies: 6
Views: 1127

Re: Poor Bandwith Test Results

my friends

i have achieved many installations since 2005 with mikrotik
i am not new to mikrotik , pls trust my words
get 2 rb411 RouterOs version 4.x and install them in p2p mode and do bandwith test
you will know what i am talking about

Regards
by jowi007
Sat Jun 26, 2010 12:19 pm
Forum: General
Topic: Poor Bandwith Test Results
Replies: 6
Views: 1127

Re: Poor Bandwith Test Results

yes nstreme enables best fit

on version 3.30 i have 10 mbps tx 10 rx
on any higher version of OS the same setup gives nothing more than 1 mbps

thx
by jowi007
Sat Jun 26, 2010 12:08 am
Forum: General
Topic: Poor Bandwith Test Results
Replies: 6
Views: 1127

Poor Bandwith Test Results

We had installed a p2p link for 1 km clear line of sight , using 24 db grids 5 ghz freq with 2 rb411 with 2 r52h signal is some -30 each side the link was not passing 2 mbps of traffic we upgraded to RouterOs 4.10 and routerOs version 5 beta 3 and the issue was all the time the same some kbps in upl...
by jowi007
Sun Mar 29, 2009 2:27 pm
Forum: Wireless Networking
Topic: ISSUE between DCMA82 MMCX and RB 4XX series
Replies: 0
Views: 387

ISSUE between DCMA82 MMCX and RB 4XX series

Hi

Did anyone faced problems between DCMA82 MMCX version and ROuterboard LIke RB433
board reboots since wireless interface is enabled
the problem do not exist on DCMA82 ufl version and dosnt exist with DCMA82 MMCX and all other boards like Rb 333 and rb 133

THank you
by jowi007
Mon Sep 22, 2008 10:28 am
Forum: General
Topic: bandwith shaping
Replies: 0
Views: 532

bandwith shaping

I am shaping a client of mine in uplink for 2536kbps , using simple queue
his 5 min average graph shows 2 mbps as maximum for 1 month
is anything should be done in queue types / (( queue size ?))
to make him take the 2.5 MBPS dedicated ?

Regards
by jowi007
Thu Aug 14, 2008 11:42 am
Forum: Scripting
Topic: script to enable sheduler
Replies: 0
Views: 855

script to enable sheduler

HI

i am using MIkrotik 3.11 i neeed a script to enable and disable Scheduler
thanks in advance
by jowi007
Sat Jun 07, 2008 1:10 am
Forum: Scripting
Topic: disable simple queues
Replies: 1
Views: 1022

disable simple queues

hi i need to disable simple queues for 8 hours per day
any script to do it ? ROS V 3.9

thanks in advance
by jowi007
Wed May 28, 2008 1:19 am
Forum: The User Manager
Topic: Mac authentication for pppoe
Replies: 7
Views: 4007

Re: Mac authentication for pppoe

ok thats nice thank you very much

is it possible to have managers and for each manager / customer his own clients ?
cannot have customer parent himself i get no permission
by jowi007
Sat May 24, 2008 8:42 am
Forum: The User Manager
Topic: Mac authentication for pppoe
Replies: 7
Views: 4007

Re: Mac authentication for pppoe

User Manager/Subscribers
From MikroTik Wiki
Jump to: navigation, search
Subscriber is a customer with owner permissions who's parent is himself;


i cannot succed to make customer parent himself it gives no permission
any idea ?
by jowi007
Fri May 23, 2008 9:44 am
Forum: The User Manager
Topic: Mac authentication for pppoe
Replies: 7
Views: 4007

Re: Mac authentication for pppoe

I NEED MAC AUTHENTICATION CZ USERS CAN HAVE IN SAME TIME 2 CONNECTIONS WITH THE SAME USERNAME AND PASS
NEED TO SOLVE THIS ISSUE
by jowi007
Sat May 17, 2008 4:50 pm
Forum: The User Manager
Topic: Mac authentication for pppoe
Replies: 7
Views: 4007

Mac authentication for pppoe

Pppoe client does not have mac authentication with username and pass
will this be added soon ?
also if possible to have for each customers/Dealer his own users separated

thanks in advance
by jowi007
Mon Feb 25, 2008 2:48 pm
Forum: Scripting
Topic: disable and enable routes using netwatch
Replies: 2
Views: 3106

Re: disable and enable routes using netwatch

Worked very very fine thank you a lot
by jowi007
Sun Feb 24, 2008 10:48 pm
Forum: Scripting
Topic: disable and enable routes using netwatch
Replies: 2
Views: 3106

disable and enable routes using netwatch

HI

i have 2 Uplinks running i am routing raffic based on mangle for some ports
i need to make netwatch disable routes number 30 for example when ping to 10.77.77.1 is down and enable it when ping is back
Pls if someone can give me the script for this
Ros Version is 2.9.38
THanks in advance
by jowi007
Wed Jan 09, 2008 10:22 pm
Forum: Scripting
Topic: Script of 2.9 version not running on version 3
Replies: 2
Views: 1005

Re: Script of 2.9 version not running on version 3

thank you it worked
by jowi007
Sat Jan 05, 2008 1:55 am
Forum: Scripting
Topic: Script of 2.9 version not running on version 3
Replies: 2
Views: 1005

Script of 2.9 version not running on version 3

Hi i have upgraded from 2.9.46 version to version 3 havet his script not working pls let me know what i should change in it thanks in advance :local traf; /queue simple :for i from=1 to= 254 do = { :if ([/queue simple find target-addresses=("172.15.15." . $i)] != "") do={ :set traf [get [find target...
by jowi007
Fri Nov 30, 2007 12:45 am
Forum: Wireless Networking
Topic: Mikrotik Routers and Humidity
Replies: 4
Views: 1297

Re: Mikrotik Routers and Humidity

Hi Gerard , i am customer of quicklink already , have faced a problem with 5ghz girds during rain time , 3 of 10 grids installed in same location when having some water on the extremity of the grid loose signal and then it is back again but the signal is -57 / -59 or nothing , when the rain stops al...
by jowi007
Fri Oct 12, 2007 12:28 am
Forum: General
Topic: PPPoE transparent mode
Replies: 2
Views: 830

Re: PPPoE transparent mode

with bridge u can filter , allow mac protocol pppoe discovery and pppoe protocol and drop all the rest

also there is an option witch might help on cpe , let cpe dial the main server and make srcnat for the client on his lan interface
by jowi007
Wed Oct 10, 2007 2:51 pm
Forum: General
Topic: exclude some traffic from shaping
Replies: 1
Views: 613

exclude some traffic from shaping

hi alll i shaped by simple queue 192.168.0.0/24 all ip's 64k/256k each ip has it's simple queue i have a local ftp server i want my clients passing thru this shaper to access it with higher speed i mark the packets and create a simple queue for them and set priority lower than 8 or i set it in queue...
by jowi007
Sat Sep 08, 2007 6:54 am
Forum: General
Topic: bandwidth limit
Replies: 1
Views: 608

Re: bandwidth limit

Sir

pls go to terminal
type queue
then simple
and print and paste it here
you have something wrong with ur shaping
by jowi007
Sat Aug 04, 2007 6:11 pm
Forum: RouterBOARD hardware
Topic: RB192 and RB333
Replies: 67
Views: 12108

Re: RB192 and RB333

by jowi007
Fri Apr 27, 2007 8:32 am
Forum: Scripting
Topic: static routes
Replies: 2
Views: 1193

thank you for your great help
by jowi007
Fri Apr 27, 2007 1:41 am
Forum: Scripting
Topic: static routes
Replies: 2
Views: 1193

static routes

i need pls to write a script to enable and disable static routes

each static route is on separate interface
i need script to enable and disable static routes to each gateway
when there is not traffic on 1 of the interfaces
is this possible ?
by jowi007
Sun Apr 08, 2007 8:38 pm
Forum: Scripting
Topic: limiting users traffic
Replies: 10
Views: 3224

total bytes is not always counting total download of customer is 200 mb and total bytes are 11 mb how i can solve this
i need to type in sript instead of total-bytes , downloaded bytes
by jowi007
Fri Apr 06, 2007 9:01 am
Forum: Scripting
Topic: limiting users traffic
Replies: 10
Views: 3224

pedja thx for your help , you mean i have to add 2 simple queue for each customer ?
by jowi007
Sun Mar 25, 2007 10:34 am
Forum: Scripting
Topic: limiting users traffic
Replies: 10
Views: 3224

i made the script and working fine
i need to allow free trafffic between midnight and morning to not be counted in the counters is it posssible ?
by jowi007
Thu Mar 22, 2007 12:18 am
Forum: Wireless Networking
Topic: cpu load
Replies: 10
Views: 1891

fixed

same link with bridging and wds giving 17 mbps on cpu load 100 %
i switched one board to ap and second to station and used static routing between them i got 23 mbps on tcp as i see ip routing is lesss cpu hungry
by jowi007
Wed Mar 21, 2007 9:52 am
Forum: Wireless Networking
Topic: cpu load
Replies: 10
Views: 1891

yes only bridging transparent with wds , when i have 2500 p/s cpu is 100 % , on 532 cpu cannot go more than 266 it is old 532 i tried to make it 333 but cpu goes back to 266
by jowi007
Wed Mar 21, 2007 12:53 am
Forum: Wireless Networking
Topic: cpu load
Replies: 10
Views: 1891

cpu load

hi
i have 2 rb532 with 2 sr5
signal level is -60
i have a problem of cpu load 100 % on 5 mbps of uplink rate
i am using bridging with wds i can switch the link to ip routing without bridging will this reserve cpu load ?
by jowi007
Wed Mar 21, 2007 12:19 am
Forum: Scripting
Topic: limiting users traffic
Replies: 10
Views: 3224

of course simple que is a must
every user and ip
by jowi007
Tue Feb 20, 2007 12:37 am
Forum: Wireless Networking
Topic: R52 diversity
Replies: 3
Views: 1212

R52 diversity

hi

when i conect the r52 to the auxilary antena conector i got better signal then the main antenna conector
anu idea?
by jowi007
Sun Feb 18, 2007 3:14 am
Forum: Scripting
Topic: limiting users traffic
Replies: 10
Views: 3224

pedja i did this 2 scripts still need to wait if system will make counters reset at midnight 0 name="traffic-shaper" owner="admin" policy=ftp,reboot,read,write,policy,test,winbox,password last-started=feb/17/2007 23:47:23 run-count=7 source= :local traf; /queue simple :for i from=1 to= 254 do = { :i...
by jowi007
Sun Feb 18, 2007 3:11 am
Forum: Scripting
Topic: give a traffic 200 MB for each user !!
Replies: 5
Views: 2430

0 name="traffic-shaper" owner="admin" policy=ftp,reboot,read,write,policy,test,winbox,password last-started=feb/17/2007 23:47:23 run-count=7 source= :local traf; /queue simple :for i from=1 to= 254 do = { :if ([/queue simple find target-addresses=("10.1.1." . $i)] != "") do={ :set traf [get [find t...
by jowi007
Sun Feb 18, 2007 1:32 am
Forum: Scripting
Topic: limiting users traffic
Replies: 10
Views: 3224

thank you
i prefer to give the option of having 100 mb on a very high speed
i i will try it and get back to you many thanks
by jowi007
Thu Feb 15, 2007 12:41 am
Forum: Scripting
Topic: limiting users traffic
Replies: 10
Views: 3224

limiting users traffic

http://wiki.mikrotik.com/wiki/Limiting_ ... of_traffic

pls did anyone tried this
how to add it to the system scheduler to be run every 15 min
by jowi007
Sun Feb 11, 2007 11:15 pm
Forum: General
Topic: Apply different speed for customers day and night
Replies: 7
Views: 1843

i think this will be better i can make faster browsing for all normal user they will browse for 64/256 speed and abusers will be downgraded to lower speed the 32/128 will this configuration work ? name="Joseph Day" target-addresses=10.10.10.238/32 dst-address=0.0.0.0/0 interface=all parent=none dire...
by jowi007
Sun Feb 11, 2007 10:13 am
Forum: General
Topic: Apply different speed for customers day and night
Replies: 7
Views: 1843

thx i will try it and let you know the result
by jowi007
Sun Feb 11, 2007 2:22 am
Forum: General
Topic: Apply different speed for customers day and night
Replies: 7
Views: 1843

Apply different speed for customers day and night

Hi i am using simple queue for my pppoe users i want to give some users special time of faster internet will these queue do the job ? 18 name="Joseph Day" target-addresses=10.10.10.238/32 dst-address=0.0.0.0/0 interface=all parent=none direction=both priority=8 queue=default-small/default-small limi...
by jowi007
Fri Feb 09, 2007 11:29 pm
Forum: General
Topic: MT as a SHAPER
Replies: 10
Views: 1947

[admin@MikroTik] ip firewall mangle> pr Flags: X - disabled, I - invalid, D - dynamic 0 chain=prerouting protocol=tcp dst-port=80 action=mark-packet new-packet-mark=Http passthrough=yes 1 chain=prerouting protocol=udp dst-port=53 action=mark-packet new-packet-mark=Dns passthrough=yes 2 chain=prerout...
by jowi007
Mon Feb 05, 2007 9:37 am
Forum: General
Topic: MT as a SHAPER
Replies: 10
Views: 1947

HI i Am facing the same needs i made pakcet mark in mangle for http prerouting and mark connection for http packetts and in queue tree i added a global total queue for http priority 2 and dns priority 1 and then i can add in simple queue if i want the total bandwith needed for http packets for examp...
by jowi007
Sun Jan 21, 2007 5:01 am
Forum: General
Topic: TTL
Replies: 0
Views: 510

TTL

hi
i neeed to block all icmp with TTL=127
is it possible to be done?
thx in advance
by jowi007
Sun Jan 21, 2007 4:50 am
Forum: General
Topic: Alepo with Mikrotik - URGENT!
Replies: 4
Views: 987

alepo

yes maroun i can help you it is easy
but u need to give me a copy of ur version cz i am working on version 4.2 isp i pay for it also
by jowi007
Sat Jan 06, 2007 3:26 pm
Forum: Wireless Networking
Topic: Low throughput
Replies: 11
Views: 2194

here is the signal

[admin@MikroTik] interface wireless registration-table> pr # INTE... RADIO-NAME MAC-ADDRESS AP SIGNAL... TX-RATE 0 wlan1 00026F3E1D0C 00:02:6F:3E:1D:0C yes -48dBm... 54Mbps [admin@MikroTik] interface wireless registration-table> i am getting on tcp maximum throughput 9.1 mbps without nstreme and 8 m...
by jowi007
Tue Dec 26, 2006 1:22 am
Forum: Wireless Networking
Topic: Low throughput
Replies: 11
Views: 2194

info

well i putted in same location 2 patchs 23 db , and i discovered the problem the grid antenas needs to change polarity i fixed now , the 2 patchs together give -48 signal , throughput is 13 MBps and from a side patch and other side a grid the signal is -61 but also the throughput is 12 mbps , i will...
by jowi007
Sat Dec 23, 2006 2:24 am
Forum: Wireless Networking
Topic: Low throughput
Replies: 11
Views: 2194

Low throughput

i installed a link for maximum of 5 kms rb112 boards , 2.9.38 mik wireles cards are EMP8602 band used 5 ghz signal level is -48 abd bandwith test show maximum of 768 uplink and 4 mbps downlink , i expected really more I Am using Ap bridge / station wds , will Ap bridge / Station ( cz all traffic wil...
by jowi007
Wed Dec 13, 2006 6:52 pm
Forum: Wireless Networking
Topic: M17/60-RG142
Replies: 0
Views: 613

M17/60-RG142

I am unable to find lmr 400 or 600 in the market , all i found is this
type of cable M17/60-RG142 , will it work fine on 5 ghz freuencies ?
by jowi007
Sat Sep 09, 2006 5:00 pm
Forum: The User Manager
Topic: quota
Replies: 8
Views: 4752

quota

it would be nice to make
quota limit per day for users
so we will be able to open high speed accounts for 100 Mb daily for example tx/rx or limit is on rx only or tx only

thanks guys and good luck
by jowi007
Mon Aug 28, 2006 5:22 pm
Forum: Wireless Networking
Topic: Dlink Dwl G520
Replies: 1
Views: 770

Dlink Dwl G520

Hi
AP bridge not working with super g turbo on DLink DWL-G520
but on superg all is working fine
MIkrotik version 2.9.27
did anyone faced same problem ?
by jowi007
Fri Aug 11, 2006 9:59 am
Forum: Wireless Networking
Topic: DWL-AG530
Replies: 2
Views: 820

DWL-AG530

AirPremier AG Wireless 108Mbps PCI Adapter DWL-AG530 PCI 802.11a/b/g AR5004X Super AG with XR

is this card supported ?
by jowi007
Fri Aug 11, 2006 1:32 am
Forum: Wireless Networking
Topic: hidden channel
Replies: 2
Views: 977

hidden channel

hi did anyone tried to get hidden channel like 4900 mhz on any 5 ghz wirelss card ? or 2.5 freq on atheros AR5212 Or AR5213 ?
does the extra channel license do this on level 5 ?
by jowi007
Sun Aug 06, 2006 10:34 am
Forum: General
Topic: User manager
Replies: 3
Views: 1357

it works

no cibernet it was a mistake from me in pppoe profile i had to choose local adddress and remote address all is fine now , you can specify the ip you need and make a burst queue for him in simple queues but the usermanager still need MB credits (quota accounts) it will be very nice thanks for your he...
by jowi007
Fri Aug 04, 2006 9:13 am
Forum: General
Topic: User manager
Replies: 3
Views: 1357

fixed

i fixed this thing i was forgetting to select the use radius in secrets but now i am facing another problem user is not getting the ip i am choosing , the log says 0:57:59 pppoe,ppp,info <pppoe-0>: waiting for call... 20:57:59 pppoe,ppp,info <pppoe-joe>: authenticated 20:57:59 pppoe,ppp,info,account...
by jowi007
Fri Aug 04, 2006 8:33 am
Forum: General
Topic: User manager
Replies: 3
Views: 1357

User manager

Hi guys i did all what is in wiki/ usermanager i setup radius in mikrotik and usermanager , router added with same shared secrets and accepted all incoming conections in radius not working even radius client in mikotik not marking any hits could be that pppoe and usermanager must be on 2 different p...
by jowi007
Sun Jul 30, 2006 9:53 pm
Forum: General
Topic: problem
Replies: 1
Views: 933

problem

hi guys
i have a dvb-s2 frame relay big backbone
i need to setup mikrotik after the dvb box
eth1 in dvb is conected to eth1 in mikrotik
and traffic should then be divided as
eth2 and eth3 must see eth1 but eth2 cannot see eth3
do i need vlan , or bridging or simple routing will do ?
by jowi007
Sun Jul 30, 2006 12:03 am
Forum: General
Topic: Advise
Replies: 0
Views: 758

Advise

dear sir i need an advise i need to do something never did before i have a downlink traffic coming from satellite to dvb i want to conect the dvb directly to my mikrotik and go with other ethernet cards to diferent clients on each interface i will have the ip of this client and his bandwith assigned...
by jowi007
Sat Jul 15, 2006 7:02 am
Forum: General
Topic: radius manager
Replies: 1
Views: 754

radius manager

hi guys did anyone tried radius manager?

http://www.dmasoftlab.com/
by jowi007
Mon Jun 12, 2006 9:20 pm
Forum: General
Topic: user manager
Replies: 1
Views: 605

user manager

i downloaded the user manager package but did not find it in the winbox
but it is loaded with the system packages
did anyone tried it ?
by jowi007
Tue May 23, 2006 9:36 am
Forum: General
Topic: burst speed with pppoe
Replies: 10
Views: 2680

pppoe

maroon ur right i will do what you suggest /24 when i will install a raidus i am doing a simple queue now for 2 reasons first i will be free to do whatever i want concerning speed for any user and also i am doing all this to make smtp queue be over the customers queuing so all my user will have full...
by jowi007
Sun May 21, 2006 12:54 pm
Forum: General
Topic: burst speed with pppoe
Replies: 10
Views: 2680

pppoe

Flags: X - disabled, I - invalid, D - dynamic 0 X name="smtp" dst-address=0.0.0.0/0 interface=all parent=none packet-marks=smtp priority=8 queue=ethernet-default/ethernet-default limit-at=0/0 max-limit=0/0 total-queue=default 1 X name="Http" dst-address=0.0.0.0/0 interface=all parent=none packet-mar...
by jowi007
Sun May 21, 2006 11:31 am
Forum: General
Topic: burst speed with pppoe
Replies: 10
Views: 2680

pppoe

lags: X - disabled, I - invalid, D - dynamic 0 X name="burst test" target-addresses=10.11.1.0/24 dst-address=0.0.0.0/0 interface=all parent=none priority=4 queue=default/default limit-at=12000/96000 max-limit=12000/96000 burst-limit=24000/144000 burst-time=15s/45s total-queue=default 1 D name="<pppo...
by jowi007
Sun May 21, 2006 12:55 am
Forum: General
Topic: burst speed with pppoe
Replies: 10
Views: 2680

pppoe

i have address list from 10.11.1.1-10.11.1.254 this is chosen by a pppoe profile i disabled bandwith rate on the profile kept it empty and i created a simple queue with destination address 10.11.1.0/24 and putted the burst speeds i think my error is that is should be target address instead of destin...
by jowi007
Sat May 20, 2006 1:04 pm
Forum: General
Topic: burst speed with pppoe
Replies: 10
Views: 2680

burst speed with pppoe

Hi i have a mikrotik box working as main server with pppoe function , routing and webcache

i tried to make burst queues for users thru pppoe conection bvut it didn't worked anyone tried before ?
thanks in advance
by jowi007
Mon May 15, 2006 2:27 am
Forum: General
Topic: Ip proxy and ip webproxy
Replies: 1
Views: 1532

Ip proxy and ip webproxy

in wiki in dmitry firewall section there is maybe some mistake / ip proxy set enabled=yes port=3128 parent-proxy=0.0.0.0:1 maximal-client-connecions=1000 maximal-server-connectons=1000 / ip proxy access add dst-port=23-25 action=deny comment="block telnet & spam e-mail relaying" disabled=no / ip pro...
by jowi007
Fri Mar 24, 2006 2:03 am
Forum: General
Topic: smtp
Replies: 6
Views: 1441

hi guys i tryed the simple queue with marked packets smtp it is even not counting bits
by jowi007
Fri Mar 24, 2006 1:53 am
Forum: General
Topic: Simple traffic usage for customers
Replies: 6
Views: 2177

radius server

you have to use a radius server
http://www.aleppo.com is an example
by jowi007
Thu Mar 09, 2006 2:10 am
Forum: General
Topic: smtp
Replies: 6
Views: 1441

smtp

yes i mangled packets prerouting and marked as smtp then a static route to 10.20.30.3 with packet mark smtp then dstnat all smtp traffic to 10.20.30.3 dstport 25 than masquerade all smtp trafic srcnat the smtp is working well i just need to give higher speed on smtp when pppoe client is sending emai...
by jowi007
Thu Mar 09, 2006 1:54 am
Forum: General
Topic: smtp
Replies: 6
Views: 1441

smtp

hi i forwared all my clients smtp traffic to an smtp relay near my mikrotik server on following ip 10.20.30.3 and all is just fine all is working exept one more thing i need to do i need to disable shaping or give hight speed on the marked pakets smtp it means if my customer is 64 kbps upload i do n...
by jowi007
Thu Mar 09, 2006 1:50 am
Forum: General
Topic: Pent@office Router +Mikrotik
Replies: 1
Views: 873

very easy

maroon very easy thing to do feel
route anythinng from penta to default gateway on mikrotik
than a static route on mikrotik 0.0.0.0/0 to ur uplink gateway and its all
pls if you need more help feel free to call me
03459452
regards
by jowi007
Sun Mar 05, 2006 9:22 pm
Forum: General
Topic: backup link
Replies: 0
Views: 558

backup link

HI guys i have 1 uplink llink with 2 downlink services each one entering by an interface to my main mikrotik ether 2 is on a flat rate cir downlink ehter 3 is on a per traffic cir backup i need mikrotik to check the internet on the flat rate servcie and if it is down for 5 min to switch to the secon...
by jowi007
Wed Feb 22, 2006 12:09 am
Forum: General
Topic: qos gateway
Replies: 0
Views: 521

qos gateway

hi i want to setup a mikrotik box in and out bridge want to place it between my pppoe servers and the main router i want to use it to give priority for certain ports as http and msn before other things , alli have is to mark all traffic coming from in interface and nat it to the out interface and gi...
by jowi007
Thu Feb 16, 2006 11:32 pm
Forum: General
Topic: Qos
Replies: 3
Views: 1078

qos

Cibernet
thx for your help
i know this my point is that i need to use the 2 mbps to the maximum and i do not want to use any kbps more
i want mykrotik to automatic give high speed and lower speed when link is full or free or visversa
by jowi007
Thu Feb 16, 2006 5:44 pm
Forum: General
Topic: Qos
Replies: 3
Views: 1078

Qos

Hi i have the folowing configuration ether1 "256 kbps uplink speed " "2048 downlink speed CIR" and a pppoe server running with default speed to all users 16kbps up and 128 kbps down my question is that i can make a script or something that can automatically check when there is a free bandwith on the...
by jowi007
Fri Jan 27, 2006 12:15 am
Forum: General
Topic: throughput problem
Replies: 3
Views: 954

throughput problem

hi i am facing a strange problem with mikrotik i have 1 mbps uplink
mikrotik rarely can deliver uplink requests to outside
if i conect a regular computer on my like i can get all the rest of free bandwith
but all my clients are after the mikrotik and facing a slowness
did anyone faced this before?
by jowi007
Thu Jan 26, 2006 3:13 am
Forum: General
Topic: traffic forwarding
Replies: 6
Views: 3364

here is torch result on port 80 after removing src address in webproxy tcp 64.233.161.104 80 (http) 82.198.x.1x 55405 640bps 0bps tcp 64.233.161.99 80 (http) 82.198.x.1x 55407 5.5kbps 0bps tcp 66.230.183.130 80 (http) 82.198.x.1x 55417 832bps 0bps tcp 207.46.5.3 80 (http) 82.198.x.1x 55413 416bps 0b...
by jowi007
Thu Jan 26, 2006 12:30 am
Forum: General
Topic: traffic forwarding
Replies: 6
Views: 3364

i will repeat all with explantion

Mikrotik Configuration Uplink nic 2 ips : 212.55.89.56/29 and 82.54.88.98/29 Downlink NIc Ip : 10.20.30.1 coming from dvb Users nic PPOE SERVER ip routes table is As 0.0.0.0/0 to default gatewy 212.55.89.x at my isp if i add here a secound route for the downlink ip the route is marked with S only an...
by jowi007
Wed Jan 25, 2006 11:58 pm
Forum: General
Topic: traffic forwarding
Replies: 6
Views: 3364

we are here to share knowledge why you don't try to help instead of saying unused things ?
by jowi007
Wed Jan 25, 2006 1:29 pm
Forum: General
Topic: traffic forwarding
Replies: 6
Views: 3364

that's what i am doing prerouting for traffic in mangle each with its port and then static routes to the downlink ip i cannot use downlink gateway in 2.9.6 i am able to put 2 static routes on uplink interface downlink gateway and uplink gateway and each one has prefered sourse for example static rou...
by jowi007
Wed Jan 25, 2006 11:09 am
Forum: General
Topic: traffic forwarding
Replies: 6
Views: 3364

traffic forwarding

HI i need small help i have uplink nic with ip 212.55.89.56 with gateway 212.55.89.55 and downlink nic with ip 82.54.88.98 in the ip routes my default route is dest 0.0.0.0/0 to default gateway 212.55.89.55 uplink is 128 rx and tx and downlink is 512 cir i run the squid on 82.54.88.98 so all traffic...
by jowi007
Mon Jan 23, 2006 6:44 pm
Forum: General
Topic: burst with simle queue
Replies: 9
Views: 1861

cibernet what you mean by default in pppoe is it a new feature in 2.9.11 ?
thank you in advance
by jowi007
Sat Jan 21, 2006 9:45 am
Forum: General
Topic: burst with simle queue
Replies: 9
Views: 1861

burst with simle queue

i ma trying to add simple que for a pppoe user his default speed is 8k/64k the queue is added but not counting packets and bytes his default one is counting here is my configuration [admin@NT] queue simple> print Flags: X - disabled, I - invalid, D - dynamic 0 name="joe" dst-address=10.11.3.254/32 i...
by jowi007
Fri Jan 20, 2006 2:39 pm
Forum: General
Topic: denail of service
Replies: 5
Views: 1732

cybernet thank you very welll but i did this also what was happening was 2 things one coming from many ip's with destination 1080 socks and another range of ips with source port smtp 25 destination my ip with diferent ports i made chain imput src port tcp 25 drop and the second u told about will tha...
by jowi007
Fri Jan 20, 2006 9:06 am
Forum: General
Topic: denail of service
Replies: 5
Views: 1732

cibernet of course i disabled the socks poroxy and this countinues if i give you the output file of the torck tool i got can you help ?
by jowi007
Fri Jan 20, 2006 1:08 am
Forum: General
Topic: denail of service
Replies: 5
Views: 1732

denail of service

i had a strange thing happening i have an uplink of 128 kbps daily it is fulll until i change ip to new one someone is tracking me when i run torck i got his and also got list of many source ip's with src port smtp 25 pls if someone had this thing before or know how to solve it cp 69.42.74.235 46078...
by jowi007
Wed Jan 18, 2006 12:37 am
Forum: General
Topic: bandwith priority by queue
Replies: 2
Views: 1107

i made mangle of course
if i will give u my configuration can u help ?
by jowi007
Tue Jan 17, 2006 8:59 am
Forum: General
Topic: bandwith priority by queue
Replies: 2
Views: 1107

bandwith priority by queue

dear all i have a configuration to make priority on bandwith the msn queue is not counting packets can anybody help name="dns" parent=global-out packet-mark=dns-queue limit-at=0 queue=default priority=1 max-limit=0 burst-limit=0 burst-threshold=0 burst-time=0s 1 name="msn" parent=global-out packet-m...
by jowi007
Tue Jan 17, 2006 8:54 am
Forum: General
Topic: smtp
Replies: 2
Views: 1156

yes thank you andrew i noticed after i made the post that i should use nat
thanks for ur great help
by jowi007
Mon Jan 16, 2006 3:32 pm
Forum: General
Topic: smtp
Replies: 2
Views: 1156

smtp

hi
pls i need to forward all packets coming to microtik to a parallel smtp server
will it be : chain=forward dst-address:mtip protocol=tcp port =25 to dst-adddress : x.y.z ?
will that be enought ?
by jowi007
Sat Jan 14, 2006 11:38 pm
Forum: General
Topic: cant ping from MT
Replies: 3
Views: 1274

yes pls in terminal try to ping http://www.yahoo.com and what you get , do u get an ip or not , if u get an ip and timeout meand that u have to check rule for allow icmp in firewall
by jowi007
Sat Jan 14, 2006 11:23 pm
Forum: General
Topic: pppoe problem
Replies: 5
Views: 1632

pls check

dear hady it could be from many things first of call can be bad throughpt of the wireless link or the hardware try to connect from another computer at the clients side , could be his interface hard second try to install raspppoe from raspppoe.com maybe the dial up connection on ur customer side is n...
by jowi007
Sun Jan 08, 2006 6:27 pm
Forum: General
Topic: radius server that handles pppoe and works on microsoft?
Replies: 6
Views: 1694

hzeid

pls leave me ur email address or phone number and info i will contact you
i am from lebanon also
and i have a copy of rbs ready to install and make all working for you
by jowi007
Sun Jan 08, 2006 12:18 am
Forum: General
Topic: how to forward smtp
Replies: 1
Views: 1039

how to forward smtp

i want to setup a mail server behind mikrotik how to forward smtp requests to it?
by jowi007
Sat Jan 07, 2006 11:33 pm
Forum: General
Topic: radius server that handles pppoe and works on microsoft?
Replies: 6
Views: 1694

alepo rbs

but you will need me to assist in the installation and make all job done
by jowi007
Sat Jan 07, 2006 11:31 pm
Forum: General
Topic: radius server that handles pppoe and works on microsoft?
Replies: 6
Views: 1694

alepo rbs

yes alepo rbs can do all what you want
by jowi007
Wed Jan 04, 2006 7:37 am
Forum: General
Topic: WOW
Replies: 3
Views: 1616

described

hi i did it here all traffic thru fiber exept proxy

http://forum.mikrotik.com/viewtopic.php?t=6204
by jowi007
Wed Jan 04, 2006 7:32 am
Forum: General
Topic: proxy
Replies: 0
Views: 869

proxy

PLS need to know wich is best way to do the following i have router od with 3 interfaces ether1 is uplink on ip 212.98.x.x eher2 is satellite downlink ip 82.198.x.x ether 3 is giving internet to my customers first i enable1 nat on the ether 1 to all connected to ether 3 ,and defaut route is added to...
by jowi007
Sat Dec 31, 2005 7:08 pm
Forum: General
Topic: WOW
Replies: 3
Views: 1616

WOW

Hi I have AN interface on uplink and an interface coming from downlink
satellite and a third interface giving internet to my customers i need to make all traffic used by the game wow not to go to the satellite interface i need it to pass directly by the uplink interface

regards
by jowi007
Sat Dec 31, 2005 1:31 am
Forum: General
Topic: webproxy
Replies: 3
Views: 1521

webproxy

hi if somebody can help me disable shaping on my cached objects in the webproxy
i am running 2.9.6 mt
i need clients to get anything cached in webproxy with lan speed and everything coming from the internet directly to obey to shaping is that possible?
by jowi007
Wed Dec 21, 2005 11:48 pm
Forum: General
Topic: bandwith shaping and squid cache
Replies: 2
Views: 863

thanks for ur kind reply
but as i understood fromt he example i will not be able then to shape the clients , the example now shape the outgoing interface of the router
by jowi007
Tue Dec 20, 2005 1:51 am
Forum: General
Topic: bandwith shaping and squid cache
Replies: 2
Views: 863

bandwith shaping and squid cache

is there any possibilty to disable shaping from the cached objects in the squid inside mikrotik ? it means if pppoe user requested any already downloaded file he can get it with full speed lan

thanks
by jowi007
Fri Nov 25, 2005 10:59 pm
Forum: General
Topic: dvb downlink and mikrotik
Replies: 0
Views: 657

dvb downlink and mikrotik

Hi , i have an upload link and a downlink , my real ip is on the windows system where the security is not present i want to forward all packets coming from the dvb to the mikrotik on a fake ip on the ether1 for exaple all packets coming from sat will arive to the default gateway 10.0.0.1 and on the ...
by jowi007
Sat Oct 29, 2005 8:52 am
Forum: General
Topic: DVB Support
Replies: 6
Views: 4330

dvb

pentanet is compatible with redhat
you can add penta net only it is enought i am sure many ppl are interested , this will make the mikrotik dvb receiver and packet router in same time
by jowi007
Fri Oct 28, 2005 1:47 am
Forum: General
Topic: DVB Support
Replies: 6
Views: 4330

DVB Support

Sir It is really a bad thing that a great software like mikortik does not support dvb cards if mikrotik can support dvb cards like pentanet we will eliminate the usage of 1 pc in our stations So the router will have new more features and many people will buy the sotware to use it as a satellite inte...
by jowi007
Sun Oct 16, 2005 6:21 pm
Forum: General
Topic: pppoe problem
Replies: 0
Views: 2173

pppoe problem

i tried to setup my ppppoe server from the begining on 2.9.6 and 2.9.5 when trying to login i got the eror in the log file :pppoe ppp error : could not add filters: jumps to builtin chains not allowed (6) i tried to restore the configuration from a fully working copy on mikrotik 2.8.21 it is working...