Community discussions

Search found 95 matches

by MichelePietravalle
Tue Oct 04, 2016 4:12 pm
Forum: General
Topic: PAP for Winbox Radius Logins
Replies: 7
Views: 2700

Re: PAP for Winbox Radius Logins

+1. I'm using OTP on an external radius and With CHAP IS A BIG PROBLEM!

Thanks!
by MichelePietravalle
Sun Oct 02, 2016 5:36 pm
Forum: General
Topic: PPTP iOS10
Replies: 59
Views: 23483

Re: PPTP iOS10

yes, with 6.37 works fine! (for me)
by MichelePietravalle
Mon Sep 26, 2016 4:18 pm
Forum: General
Topic: PPTP iOS10
Replies: 59
Views: 23483

Re: PPTP iOS10

hi, some problem. working with iOS 10 connected to a wifi network, not working connected to mobile network! thanks. Sep/26/2016 15:15:29 ipsec,debug,packet ========== Sep/26/2016 15:15:29 ipsec,debug,packet 788 bytes message received from 151.36.21.149[5355] to 89.x.x.x[500] Sep/26/2016 15:15:29 ips...
by MichelePietravalle
Sun Jun 07, 2015 4:54 pm
Forum: The Dude
Topic: dude function blocks with timeout
Replies: 4
Views: 2151

Re: dude function blocks with timeout

Yes, i have the identical problem!

Michele Pietravalle
by MichelePietravalle
Tue Sep 09, 2014 9:07 am
Forum: The Dude
Topic: Time error
Replies: 2
Views: 1754

Re: Time error

+1 !

All times on notifications are GMT!
by MichelePietravalle
Tue May 20, 2014 10:15 pm
Forum: General
Topic: CRS125-24G-1S-RM and LACP: Bottlenecks?
Replies: 10
Views: 4645

Re: CRS125-24G-1S-RM and LACP: Bottlenecks?

Ok, but where is the difference between bonding and trunk? As mentioned by above poster, Trunk in this context refers to a 'trunk port', which in switching refers to a port in which traffic with ALL vlans tagged (unless some form of ACL is set) is routed down the port (with the VLAN headers still i...
by MichelePietravalle
Tue May 20, 2014 8:37 am
Forum: General
Topic: CRS125-24G-1S-RM and LACP: Bottlenecks?
Replies: 10
Views: 4645

Re: CRS125-24G-1S-RM and LACP: Bottlenecks?

But with the switch trunk function, the lacp bondig will be made by hardware with wire-speed? The process of bonding the connections (and transmitting/receiving ordered packets via various interfaces) is currently processed in CPU, so CPU will always be bottleneck. Once it is programmed into switch...
by MichelePietravalle
Mon May 19, 2014 7:52 pm
Forum: General
Topic: CRS125-24G-1S-RM and LACP: Bottlenecks?
Replies: 10
Views: 4645

Re: CRS125-24G-1S-RM and LACP: Bottlenecks?

But with the switch trunk function, the lacp bondig will be made by hardware with wire-speed?
by MichelePietravalle
Thu May 08, 2014 7:36 pm
Forum: Wireless Networking
Topic: cap keeps disconnecting
Replies: 6
Views: 2756

Re: cap keeps disconnecting

the problem (for me) is about ROS on x86. with the CAPmanager installed on mipsbe works fine!
by MichelePietravalle
Thu May 08, 2014 1:49 am
Forum: Wireless Networking
Topic: cap keeps disconnecting
Replies: 6
Views: 2756

Re: cap keeps disconnecting

i have the same problem! today i will open a ticket to mikrotik.
the problem is the same with ROS 6.12 and with ROS 6.13rc14
by MichelePietravalle
Mon Jul 29, 2013 4:01 pm
Forum: Wireless Networking
Topic: Wireless Controller
Replies: 15
Views: 3996

Re: Wireless Controller

Hi! :)
any news??
by MichelePietravalle
Thu Feb 14, 2013 10:36 am
Forum: General
Topic: TCP performance over Mikrotik
Replies: 14
Views: 11266

Re: TCP performance over Mikrotik

Any news??

Thanks,

Michele Pietravalle
by MichelePietravalle
Mon Oct 22, 2012 4:43 pm
Forum: The Dude
Topic: The Dude is NOT Dead - New Dude Version...
Replies: 101
Views: 38971

Re: The Dude is NOT Dead - New Dude Version...

I agree with a post in one of the other threads, if there were plans to abandon The Dude it would be awesome to have it released to open source so developers can help build on to an already amazing software. Mikrotik, please let us know if there is ANYTHING we can do to help in the process of movin...
by MichelePietravalle
Mon Aug 20, 2012 3:44 pm
Forum: General
Topic: Feature request:Vmware support - vmwaretools package
Replies: 17
Views: 10569

Re: Feature request:Vmware support - vmwaretools package

Vmware esxi runs Mikrotik as a vm but as discussed in some threads it has performance issues since vmware-tools is not installable to Mikrotik. May be a vmware-tools package produced by Mikrotik can be easily deployed. We can have Routeros inside the esxi/esx, close to native performance. Really in...
by MichelePietravalle
Mon Aug 20, 2012 3:34 pm
Forum: RouterBOARD hardware
Topic: Gigabit PoE Problem
Replies: 11
Views: 4572

Re: Gigabit PoE Problem

From the description, it looks like the Ether1 ports are damaged by lightning or something else. If you have warranty, you can send for inspection, but there is a high chance that this is ESD (lightning) damage, which warranty doesn't cover. Here is a guide how to avoid such issues in the future: h...
by MichelePietravalle
Tue May 08, 2012 11:35 am
Forum: RouterBOARD hardware
Topic: RB411 Ethernet PHY chip (KSZ8041) source for small quantity?
Replies: 2
Views: 1200

Re: RB411 Ethernet PHY chip (KSZ8041) source for small quant

try @ rs-components: http://hr.rsdelivers.com/

the italian one is very good and with free shipments.
i have checked now and the KSZ8041NL is available.
by MichelePietravalle
Thu Jan 19, 2012 4:08 pm
Forum: General
Topic: v5.11 released
Replies: 173
Views: 44295

Re: v5.11 released

after 5 hours form the update seems to be ok! but i will wait 24h before enjoy me :)
by MichelePietravalle
Wed Jan 04, 2012 4:32 pm
Forum: General
Topic: My thoughts for v6
Replies: 51
Views: 11897

Re: My thoughts for v6

+1 for Implement High-Availability Allow Mikrotik routers to be put into an active-passive "cluster" where configuration is automatically synchronized between cluster members, IP addresses/MPLS/VPLS/BGP/OSPF/PPP are only active on the active unit. A device failure is detected by interface status, lo...
by MichelePietravalle
Tue Jan 03, 2012 10:06 am
Forum: RouterBOARD hardware
Topic: routerboard 1000 dead after reset c229 configuration
Replies: 5
Views: 2029

Re: routerboard 1000 dead after reset c229 configuration

i have a similar problem on a routerboard. i need to perform two reboot in order to have properly running rb/1000. in console log a have some messages regardin kernel crash, i will post i next days.
a netinstall will fix all.
by MichelePietravalle
Mon Jan 02, 2012 1:42 pm
Forum: General
Topic: Reply-Message for Mikrotik from freeradius
Replies: 6
Views: 2712

Re: Reply-Message for Mikrotik from freeradius

+1 ....
Variables $error or $error-orig cannot help me :(

i have opened a ticket to Mikrotik Support some minutes ago.
by MichelePietravalle
Mon Dec 19, 2011 6:20 pm
Forum: General
Topic: v5.11 released
Replies: 173
Views: 44295

Re: v5.11 released

i have not vlan!
by MichelePietravalle
Mon Dec 19, 2011 4:54 pm
Forum: General
Topic: v5.11 released
Replies: 173
Views: 44295

Re: v5.11 released

clear the configuration and recreate it step by step. after all that is mayor version upgrade that is not done to initial version of major release. :shock: :shock: :shock: an export and a new import can be good or i really need to recreate the conf???? sorry Janisk, but a reconfiguration of the rou...
by MichelePietravalle
Fri Dec 16, 2011 11:34 am
Forum: General
Topic: v5.11 released
Replies: 173
Views: 44295

Re: v5.11 released

You have the supout for my configuration, that is: - 13 EoIP tunnel to centralize hotspot system - 5 bridges collecting 5 groups of eoip tunnel - 5 hotspot servers listening on the 5 bridges - PPTP + OVPN server with 5-6 active connections - mangle based on addess lists - quee tree with pcq queue fo...
by MichelePietravalle
Fri Dec 16, 2011 10:27 am
Forum: General
Topic: v5.11 released
Replies: 173
Views: 44295

Re: v5.11 released

Hi Normis, 2 x86 Core PC/RouterOS with 5.10 are rebooting frequently... Downgraded to 5.8 and problem solved... v5.11 do something with that? Thanks and Regards! +1 Upgrade X86 Core router from 5.7 to 5.11 - rebooting frequently... Downgaded to 5.9 - rebooting frequently... Downgaded to 5.8 - probl...
by MichelePietravalle
Wed Nov 30, 2011 10:51 am
Forum: General
Topic: need the changelog of firmware 2.20 RB 600
Replies: 26
Views: 3145

Re: need the changelog of firmware 2.20 RB 600

What about 2.38? thanks!
by MichelePietravalle
Tue Nov 29, 2011 10:59 am
Forum: The Dude
Topic: RouterOS + Dude Web Interface problems...
Replies: 33
Views: 23788

Re: RouterOS + Dude Web Interface problems...

I have the same problem with ROS 5.8 and dude 4.0 beta 3 :(
by MichelePietravalle
Thu Nov 10, 2011 11:33 am
Forum: RouterBOARD hardware
Topic: L2MTU decreased on "G series" after upgrade to 5.7
Replies: 5
Views: 2441

L2MTU decreased on "G series" after upgrade to 5.7

Hi, i have the problem that after the upgrade of the RB/450G to Ros 5.7 the L2MTU was 1520 and before was 1522. This is a VERY VERY VERY VERY BIG PROBLEM for the people that uses this hardware with MPLS&VPLS, because 1500+14+4+4=1522!! Mikrotik support answer me that is a problem of ehternet chipset...
by MichelePietravalle
Wed Nov 02, 2011 4:53 pm
Forum: Forwarding Protocols
Topic: RB1200 - RX errors/drop Vpls on eth8
Replies: 2
Views: 1326

Re: RB1200 - RX errors/drop Vpls on eth8

I have tried to reproduce Your configuration but i cannot reproduce Your problem; i have also tried in a very noise FM location but also here i cannot reproduce..

Problem on this specific routerboard?
by MichelePietravalle
Wed Nov 02, 2011 4:37 pm
Forum: General
Topic: RouterOS v5.8 released
Replies: 182
Views: 86995

Re: RouterOS v5.8 released

Some updates for OSPF crashing (for example ticket [Ticket#2011090466000074] )?
Thanks,

Michele Pietravalle
by MichelePietravalle
Fri Jan 07, 2011 10:10 am
Forum: General
Topic: Bandwidth Test Tool and RADIUS
Replies: 6
Views: 2438

Re: Bandwidth Test Tool and RADIUS

ok but it's a problem; i have setted-up a centralized auth for some tech and local users are disabled! now i have make a workaround with a user only for bandwidth but its a workaround.... :(
by MichelePietravalle
Wed Jan 05, 2011 10:06 am
Forum: General
Topic: Max concurrent HotSpot users?
Replies: 6
Views: 4329

Re: Max concurrent HotSpot users?

Very good!!
what ROS version?
with external radius?

thanksm

Michele Pietravalle
by MichelePietravalle
Tue Jan 04, 2011 2:44 pm
Forum: General
Topic: Max concurrent HotSpot users?
Replies: 6
Views: 4329

Max concurrent HotSpot users?

Hi, i need to set-up an hotspot system with ~800-1000 concurrent active users; for wireless connectivity I already have a plan, but for hotspot i have some questions; someones have a hotspot system with this number of users? i have already used mikrotik hotspot but with 50-100 concurrent users; i wi...
by MichelePietravalle
Tue Nov 30, 2010 7:04 pm
Forum: General
Topic: Feature Request: MPLS RSVP-TE AUTOTUNNEL, MPLS LABEL ECMP
Replies: 18
Views: 5886

Re: Feature Request: MPLS RSVP-TE AUTOTUNNEL, MPLS LABEL ECM

i also support ecmp features!!
by MichelePietravalle
Wed Nov 24, 2010 11:39 am
Forum: The Dude
Topic: dns name resolution
Replies: 0
Views: 615

dns name resolution

is possibile to use The Dude as DNS server and resolve the name of the deviced based on ip?

it can be a good think in way to sync, for example, a external syslog with The Dude!

thanks,

Michele Pietravalle
by MichelePietravalle
Mon Oct 25, 2010 9:33 am
Forum: General
Topic: EOIP over PPTP browsing issues
Replies: 12
Views: 9570

Re: EOIP over PPTP browsing issues

The MTU is correct? try to ping from one side to other with don't fragment and 1500 packets!
by MichelePietravalle
Thu Sep 30, 2010 2:08 pm
Forum: General
Topic: 5.0 RC1 SSH crash again
Replies: 7
Views: 1875

Re: 5.0 RC1 SSH crash again

same problem in rb/600 & RB 411U
by MichelePietravalle
Wed Sep 29, 2010 11:38 am
Forum: Wireless Networking
Topic: CLIMBING TOWERS - VIDEOS AND PICTURES
Replies: 20
Views: 4328

Re: CLIMBING TOWERS - VIDEOS AND PICTURES

http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs560.snc3/30611_1467464293398_1437277174_1191794_6400821_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs282.ash1/20955_1336212732191_1437277174_902251_862983_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs202.snc3/20955_1336212612188_1437277174...
by MichelePietravalle
Wed Sep 29, 2010 11:29 am
Forum: The Dude
Topic: "Winbox" command and Dude users
Replies: 8
Views: 3774

Re: "Winbox" command and Dude users

Thanks, Normis!
But it can be a good upgrade; for example the first level of assistance can only see the maps to get some simple information (up/down - link full of traffic, etc), second level can access to customers CPE, third level can access also to BTS& core routers, etc etc!
by MichelePietravalle
Wed Sep 29, 2010 11:18 am
Forum: The Dude
Topic: "Winbox" command and Dude users
Replies: 8
Views: 3774

"Winbox" command and Dude users

Hi, i have a question: I need to create an unpriviliged user (read-only) in dudethat can use winbox to all network routeros but read-only also in routeros. if i add a new user to Dude in read-only, works as read-only in The Dude but for winbox connection, it will uses the user/password saved on the ...
by MichelePietravalle
Fri Jul 30, 2010 8:41 am
Forum: General
Topic: bandwidth-test on RB450G
Replies: 3
Views: 1341

Re: bandwidth-test on RB450G

interested!!!

"Forcing tx speed to a lower value also reduces the throughput ? WTF!?:" I have a similar problem!!!
by MichelePietravalle
Wed Jun 23, 2010 12:27 pm
Forum: Forwarding Protocols
Topic: BGP Backup
Replies: 7
Views: 2538

Re: BGP Backup

do you have only a /24? in this case is difficult to announce only half to one ISP and the other half on the other, becouse prefix< 24 are filtered and dropped!! if you have a /23 or >, you can split the announcement and announce the full /23 on both isp and a /24 for ISP; in this way the /24 is sma...
by MichelePietravalle
Sat Mar 27, 2010 1:39 pm
Forum: Wireless Networking
Topic: Bonding via vpls
Replies: 7
Views: 1489

Re: Bonding via vpls

Traffic is forwarded onto TE tunnel automatically, if remote endpoint of VPLS pseudowire is the same as TE tunnel endpoint.
and, if i will set 2 TE, VPLS uses only one or both?

thanks,

Michele Pietravalle
by MichelePietravalle
Sat Mar 27, 2010 1:35 pm
Forum: RouterBOARD hardware
Topic: RB600/RB800 SFP Daughtercard?
Replies: 7
Views: 1702

Re: RB600/RB800 SFP Daughtercard?

I don't think it makes sense to have SFP if you are limited to the PCI speed
sfp can be used to connect directly a fiber without add a media converter!
by MichelePietravalle
Tue Feb 23, 2010 1:46 pm
Forum: Forwarding Protocols
Topic: BFD configuration
Replies: 21
Views: 13176

Re: BFD configuration

yes, of course; with OSPF you can reach almost 4s of convergence without any problem, with BFD i hope for 2, this night i will test them; :D

Michele
by MichelePietravalle
Tue Feb 23, 2010 9:48 am
Forum: Forwarding Protocols
Topic: BFD configuration
Replies: 21
Views: 13176

Re: BFD configuration

mikrotik has replyed to me with the solution of increase the multiplier if the link is heavy loaded... now i will try but, if i increase the multiplier, the convergence time will increase...
by MichelePietravalle
Thu Feb 18, 2010 7:16 pm
Forum: General
Topic: L2 failover over a routed network
Replies: 2
Views: 1093

Re: L2 failover over a routed network

ok, i hope for a readable ascii-art :)
by MichelePietravalle
Thu Feb 18, 2010 7:05 pm
Forum: General
Topic: L2 failover over a routed network
Replies: 2
Views: 1093

L2 failover over a routed network

Hi, i have a question; for a my customer i need to make several L2 tunnel from a datacenter to several location; every customer have an own vlan adn every customer have a Cisco router after my mikrotik board; my customer have a /30 ip from datacenter switch and cisco cpe; now i use a VPLS tunnel fro...
by MichelePietravalle
Thu Feb 18, 2010 8:11 am
Forum: Forwarding Protocols
Topic: BFD configuration
Replies: 21
Views: 13176

Re: BFD configuration

do you have write and sent supout of this problem to mikrotik?

thanks!

Michele
by MichelePietravalle
Thu Feb 18, 2010 8:11 am
Forum: Forwarding Protocols
Topic: BFD configuration
Replies: 21
Views: 13176

Re: BFD configuration

Good!!! i'm not the only one with problem!! :D

yes, i have the some one bouncing problem; on laboratory all works fine, on real network (then with some cpue load, bandwith usage, ping latency etc etc) is very unstable; i have also try to change default values but it bounces in every setup!
by MichelePietravalle
Wed Feb 17, 2010 7:51 pm
Forum: General
Topic: NOT TO DO. Weird instalations?
Replies: 380
Views: 236284

Re: NOT TO DO. Weird instalations?

Image

a my old configuration; a lot of caos due network grow very fast but unplanned... (now it's correctly cabled!)
by MichelePietravalle
Tue Feb 16, 2010 9:24 pm
Forum: General
Topic: MUM Poland 2010 thread
Replies: 113
Views: 24235

Re: PL MUM HOTEL PRICE (sticky please)

Just booked from hotel website, 3 night (28-1-2-3) for 894PL, good price!
Breakfast extra: 54.98 PLN / day / adult :(
yes, breakfast is very expensive, but usually i don't make breakfast at morning.. :lol:
by MichelePietravalle
Tue Feb 16, 2010 2:35 pm
Forum: Forwarding Protocols
Topic: BFD configuration
Replies: 21
Views: 13176

Re: BFD configuration

without BFD i have ~1 week of ospf uptime...
by MichelePietravalle
Tue Feb 16, 2010 12:55 pm
Forum: Forwarding Protocols
Topic: BFD configuration
Replies: 21
Views: 13176

Re: BFD configuration

no, time are very different (1970 on one router! :) )

but the log that i have posted are sequential!

now i have configured ntp on the second router (writing error on ntp host :lol: )
by MichelePietravalle
Tue Feb 16, 2010 11:49 am
Forum: Forwarding Protocols
Topic: BFD configuration
Replies: 21
Views: 13176

Re: BFD configuration

yes of course! side1:"Cesen" /routing ospf interface> :put [get 2 use-bfd ] true /routing bfd interface> pr Flags: X - disabled, I - inactive # INTERFACE INTERVAL MIN-RX MULTIPLIER 0 all 0.2sec 0.2sec 5 1 2 - Mogliano 0.5sec 0.5sec 6 /routing bfd neighbor> pr Flags: U - up # STATE ADDRESS INTERFACE ...
by MichelePietravalle
Tue Feb 16, 2010 11:35 am
Forum: Forwarding Protocols
Topic: BFD configuration
Replies: 21
Views: 13176

Re: BFD configuration

already checked :) cpu is 0-5% on both rotuer (one is a 493AH, other a 450G), about packet loss i have tried to put&get data over link with wireshark and i cannot see any loss. radio signal is good, -69db with a ccq from 90 to 100%.. but, i see now, i have nstreme with "best fit" configured; can is ...
by MichelePietravalle
Tue Feb 16, 2010 11:17 am
Forum: Forwarding Protocols
Topic: BFD configuration
Replies: 21
Views: 13176

Re: BFD configuration

randomly, without link failure (radio or ethernet) i can see on the log the change of BFD from full to down with reason "packet read timeout"..
i hope for a configuration error! :lol:
by MichelePietravalle
Tue Feb 16, 2010 10:54 am
Forum: Forwarding Protocols
Topic: BFD configuration
Replies: 21
Views: 13176

BFD configuration

Hi, i need help to configure BFD; i have a ospf-based network and i'm looking to improve the convergence time during a link failure; until now, i have used ospf hello&dead time but, aftere the upgrade to 4.5, i'm testing bfd. i have configured bfd under /routing bfd interface, and i have enabled BFD...
by MichelePietravalle
Sun Feb 14, 2010 7:44 pm
Forum: Forwarding Protocols
Topic: VPLS & TE Tunnel
Replies: 2
Views: 895

Re: VPLS & TE Tunnel

Fine, thanks! i though about filter but i wasn't sure about them; thanks, i will try,

Michele
by MichelePietravalle
Sun Feb 14, 2010 1:19 am
Forum: Forwarding Protocols
Topic: VPLS & TE Tunnel
Replies: 2
Views: 895

VPLS & TE Tunnel

Hi, i have a question: i ha ve a networki with OSPF,MPLS&TE running; over this network i use some VPLS, transported over TE Tunnels; for a tunnel, i need that VPLS is running only over a specified TE tunnel; i have configured the TE with static hops, and is ok; now i need that, if this TE fail, the ...
by MichelePietravalle
Sat Feb 13, 2010 6:05 pm
Forum: General
Topic: MUM Poland 2010 thread
Replies: 113
Views: 24235

Re: PL MUM HOTEL PRICE (sticky please)

Just booked from hotel website, 3 night (28-1-2-3) for 894PL, good price!

now i'm looking fro transport from airport to hotel!
by MichelePietravalle
Thu Feb 11, 2010 7:48 pm
Forum: The Dude
Topic: Change a link without graphs losting
Replies: 3
Views: 646

Re: Change a link without graphs losting

ummm ok,

very good idea ;)
thanks,

Michele
by MichelePietravalle
Thu Feb 11, 2010 3:02 pm
Forum: Wireless Networking
Topic: 128QAM & 256QAM wireless card..
Replies: 4
Views: 1394

Re: 128QAM & 256QAM wireless card..

interested
by MichelePietravalle
Thu Feb 11, 2010 2:50 pm
Forum: The Dude
Topic: Change a link without graphs losting
Replies: 3
Views: 646

Change a link without graphs losting

Hi, a question: can i move a link without the deletion the bandwith graphs?
for exampke, i have a link between "A" and "B" (A------B); now i have to insert a third router "C" betwen A & B (A---C---B) but i need to keep bandiwth value on the link;

There is a way?

thanks,

Michele
by MichelePietravalle
Sun Sep 13, 2009 5:07 pm
Forum: Wireless Networking
Topic: VoIP over Nstreme PTMP not working good
Replies: 19
Views: 3890

Re: VoIP over Nstreme PTMP not working good

interester, i have a similar problem!!
by MichelePietravalle
Sun Sep 13, 2009 4:52 pm
Forum: General
Topic: mikrotik t-shirts
Replies: 40
Views: 11665

Re: mikrotik t-shirts

ummm an idea can be a free set of office (tile coaster, wall clock, etc) for each trainer! (interested :P )
by MichelePietravalle
Sat Sep 05, 2009 12:06 pm
Forum: Forwarding Protocols
Topic: multihoming BGP with load balancing (agreegation)
Replies: 9
Views: 3150

Re: multihoming BGP with load balancing (agreegation)

to help you, we need to know your networks. however, in a similar scenario, i think to: - announce your /21 on 10 mbps peer - announce your /21 on 4 mbps peer prepending your AS# 1 time - set default local pref on 10 mbps peer - set a low local pref on 4 mbps peer - if supported from 4 mbps peer, se...
by MichelePietravalle
Sat Sep 05, 2009 11:54 am
Forum: Forwarding Protocols
Topic: OSPF Setup
Replies: 8
Views: 3392

Re: OSPF Setup

uumar, where are you from? do tou have a ìmage of the network? i think that if you have a star-àtype network, static routing work fine for you!
by MichelePietravalle
Tue Jul 14, 2009 12:09 pm
Forum: General
Topic: 3.25 problem
Replies: 96
Views: 19201

Re: 3.25 problem

ummmm.. we can try or our router will make a thermonuclear explosion ? :lol: :lol:
by MichelePietravalle
Mon Jul 13, 2009 12:53 pm
Forum: Forwarding Protocols
Topic: RouterOS 3.25 BGP
Replies: 7
Views: 2017

Re: RouterOS 3.25 BGP

On a RB/1000 i have 3 IPv4 and 1 IPv6 peer with 3 ipv4 full table and 1 ipv6 full table, without trouble (only some lag when i change some filter or similar..)
by MichelePietravalle
Sun Jul 12, 2009 6:53 pm
Forum: Forwarding Protocols
Topic: RouterOS 3.25 BGP
Replies: 7
Views: 2017

Re: RouterOS 3.25 BGP

yes, i have some rb/1000 with ROS 3.25 and multiple peers. it work. some small problem but it's ok, 3.24 is very bad. :)
by MichelePietravalle
Sat Jun 20, 2009 4:46 pm
Forum: General
Topic: mk os versions best sooted for its make
Replies: 6
Views: 785

Re: mk os versions best sooted for its make

All RouterOS versions can be used for different purposes. Sometimes a feature or two don't work. So big deal - test and see if it works. See in the forums that nobody is complaining about serious problems with 3.24 and 3.25. It could easily work for your configuration, for the features that the net...
by MichelePietravalle
Sat Jun 20, 2009 3:32 pm
Forum: General
Topic: mk os versions best sooted for its make
Replies: 6
Views: 785

Re: mk os versions best sooted for its make

i hope, last 3-4 release was a hole in the water! :(
by MichelePietravalle
Mon Jun 15, 2009 9:01 pm
Forum: Forwarding Protocols
Topic: BGP full table Large CPU usage on rb1000 3.22
Replies: 62
Views: 19885

Re: BGP full table Large CPU usage on rb1000 3.22

wait, this night i will try :)

i hope...

Michele Pietravalle
by MichelePietravalle
Mon May 25, 2009 9:21 am
Forum: RouterBOARD hardware
Topic: Crash every 5minutes (aprox)
Replies: 3
Views: 665

Re: Crash every 5minutes (aprox)

i have some rb/450 with 3.24 but without any problem.... umm do you have PPTP server on this RB?
by MichelePietravalle
Sat May 23, 2009 11:16 am
Forum: Forwarding Protocols
Topic: BGP full table Large CPU usage on rb1000 3.22
Replies: 62
Views: 19885

Re: BGP full table Large CPU usage on rb1000 3.22

ehi guy, be carefull, mi rb/1000 with 3.24 routing test have got an automatic reboot for kernel after pptp server disabling...

i'm writing to mikrotik.
by MichelePietravalle
Sat May 16, 2009 5:12 pm
Forum: Forwarding Protocols
Topic: BGP full table Large CPU usage on rb1000 3.22
Replies: 62
Views: 19885

Re: BGP full table Large CPU usage on rb1000 3.22

btw, v3.23 winbox , work worse on routing-test package if I try change some rules, cpu go to 50%, and need much more time, 30-40 sec with standar package go to 50%, but end job in 5-10 sec. 3 peer, 3 full table. about 900k prefix/routes Good, my RB/1000 with standard or testing package, reach 100 c...
by MichelePietravalle
Thu May 14, 2009 9:40 am
Forum: Forwarding Protocols
Topic: OSPF Multiple Default Route Problem / Question
Replies: 5
Views: 5897

Re: OSPF Multiple Default Route Problem / Question

and if i want to see them for debug?

Thanks!
by MichelePietravalle
Thu May 14, 2009 9:31 am
Forum: Forwarding Protocols
Topic: BGP full table Large CPU usage on rb1000 3.22
Replies: 62
Views: 19885

Re: BGP full table Large CPU usage on rb1000 3.22

reply from Mikrotik:
Hello,

This is a known problem. v3.24 will have some improvements, and we are still working to improve current situation.

Regards,
Maris

Good! :D
by MichelePietravalle
Wed May 13, 2009 7:12 pm
Forum: Forwarding Protocols
Topic: BGP full table Large CPU usage on rb1000 3.22
Replies: 62
Views: 19885

Re: BGP full table Large CPU usage on rb1000 3.22

opened a new ticket with supout some hours ago! :D
by MichelePietravalle
Wed May 13, 2009 12:49 pm
Forum: Forwarding Protocols
Topic: BGP full table Large CPU usage on rb1000 3.22
Replies: 62
Views: 19885

Re: BGP full table Large CPU usage on rb1000 3.22

yes, i can found the problem only with ROS!

Only one full table,no ospf. Only a RB/1000 connected to a upstream carrier.

If i try to add or modify a routing filter.... cpu at 100% and winbox disconnection!
by MichelePietravalle
Wed Apr 22, 2009 1:01 pm
Forum: RouterBOARD hardware
Topic: RB 1000 Upgrade RAM to 1GB?
Replies: 8
Views: 2384

Re: RB 1000 Upgrade RAM to 1GB?

wow! ok, fine thanks!
by MichelePietravalle
Wed Apr 22, 2009 11:46 am
Forum: RouterBOARD hardware
Topic: RB 1000 Upgrade RAM to 1GB?
Replies: 8
Views: 2384

Re: RB 1000 Upgrade RAM to 1GB?

Gerard, your routerboard see whole 2 gb? i have just installed 2 gb and i see only 1,5 [admin@MikroTik] /system resource> pr uptime: 1m10s version: "3.23" free-memory: 1539956kB total-memory: 1556168kB cpu: "e500v2" cpu-count: 1 cpu-frequency: 1333MHz cpu-load: 0 free-hdd-space: 39268kB total-hdd-sp...
by MichelePietravalle
Tue Apr 21, 2009 10:09 am
Forum: Forwarding Protocols
Topic: BGP Advertisements on 2.32 routing-test
Replies: 3
Views: 1260

Re: BGP Advertisements on 2.32 routing-test

yes, all right!

only a joke of winbox!
by MichelePietravalle
Tue Apr 21, 2009 10:04 am
Forum: Forwarding Protocols
Topic: BGP Advertisements on 2.32 routing-test
Replies: 3
Views: 1260

Re: BGP Advertisements on 2.32 routing-test

ummm i don't see...

wait, i will try to delete tempwinbox file and reload...
by MichelePietravalle
Tue Apr 21, 2009 9:26 am
Forum: Forwarding Protocols
Topic: BGP Advertisements on 2.32 routing-test
Replies: 3
Views: 1260

BGP Advertisements on 2.32 routing-test

On 3.22 you have insert on winbox the tab "advertisements" in BGP winbox menu; ok, a very big table if you redistribute full table to some customers, but very usefull; now, in 3.23 this features has vanished; is true or only a forgetfulness?

Regards,

Michele
by MichelePietravalle
Tue Apr 21, 2009 9:22 am
Forum: General
Topic: Upgrade to Router 3.23 broke my VLANs
Replies: 1
Views: 428

Re: Upgrade to Router 3.23 broke my VLANs

my VLANs works without problem (3.23 routing test on a RB/1000, 6 vlan over one port, 2 over other one)
by MichelePietravalle
Mon Apr 20, 2009 11:46 am
Forum: Forwarding Protocols
Topic: BGP full table Large CPU usage on rb1000 3.22
Replies: 62
Views: 19885

Re: BGP full table Large CPU usage on rb1000 3.22

ciao :)

yes, is a good "workaround"... how many peers? full iBGP mesh?

But if in a network do you have only one peer? i don't like to change a small filters and crash the RB/1000!!

Thanks!
by MichelePietravalle
Mon Apr 20, 2009 9:56 am
Forum: Forwarding Protocols
Topic: BGP full table Large CPU usage on rb1000 3.22
Replies: 62
Views: 19885

Re: BGP full table Large CPU usage on rb1000 3.22

ok, i will send ASAP, but i think that its a "general" problem: get a rb/1000, configure a BGP peer and import full table: during the download the cpu is ar 100%... any other strange configuration! :)
by MichelePietravalle
Sun Apr 19, 2009 9:30 pm
Forum: Forwarding Protocols
Topic: BGP full table Large CPU usage on rb1000 3.22
Replies: 62
Views: 19885

Re: BGP full table Large CPU usage on rb1000 3.22

i have a similar problem. some time, adding or removing some BGP filters (and then with route reloading), cpu hangs to 100% for some time and ospf fall downwith "discarding description packet: wrong neighbo state" or "invalid sequence number". Some other time i need to ssh in and reboot my box. I ha...