I tried flat-snoop command via api, it's working fine but filter, something like ?=type=station is missing. If I want to see only networks or stations I still get frequency use !re lines before I get the right ones. If flat-snoop is running via whole 5GHz band I get too much unnecessary informations...

Hello guys, I am using mikrotik API for wireless SCAN and SNOOP. Everythink working fine, but problem is, if some connection problem commit on running SCAN or SNOOPER. If network is lost, I must reconnect to mikrotik again and that is the problem, because I cannot stop tool which was runned before c...

Hello, If I was write in previous post, standard snooper runned from console doesn´t give frequencies used by each station or network. Because I need to get it work, I make some experiments and found new command "flat-snoop" (tested on 6.37rc12) similar to "snoop" command, where ...

Hello, I don't know, where I am doing mistake, but my post is still without answer from mikrotik guys :( Please, Can You give me some answer to post bellow line. It is important for me to know, if or when this bug will be solved. p.s. at this moment I got same results with RouterOS v 6.37rc12 Many t...

Hi, I'm trying to test this release and it worked, but I am afraid, that if superchannel option it will be still available, that is it same as DFS-mode=none. For meaningfull use of this feature, must be superchannel feature removed, I think. By the way, radar detecting function working fine. If rada...

Hello, We are using snooper tool via telnet. If I run command /interface wireless snooper snoop wlan1 and than press button s for switch snooper list to station list, I am not able to see frequencies used by listed stations. I think, that this is small bug, which is related with changes in presentat...

Similar problem as in Canada probably can be in all Europe Countries, because Mikrotik try to put right frequency list to each country, but both indoor and outdoor frequencies to one list and is not possible to select where device will be used. Of course is possible change state DFS function on/off,...

Hello, due to comply with latest EN 301 893 specification I would like to improve RouterOS to similar feature, as have UBNT airos, that mean, when I run new RouterOS device for the first time, I MUST select COUNTRY and EVIROMENT (indoor/outdoor) and Agree that I will be use device with comply to nat...

Hello everybody, regarding to 802.11h addendum to 802.11 and EN301893. EN301893 said, that IEEE802.11 standard is nessesary for apply EN301893 itselfs. Must be 802.11h implemented or may be. I am little bit confused, because some manufacturer (ie. UBNT - AirOs latest version) contain in management p...

Hello,
does anybody know, if is posible to use UBNT XR3, XR5, XR7 and XR9 wifi card on Mikrotik HW and SW?
Thank You in advance.
Martin

Hello, I want to buy RB411AH with R52nM wifi Card where will be connected 2 antennas and I will want to discover neigbour sites in winbox via scan (or snoop) in wireless tab, on which antenna will perform this scan? It can be performed this scan on both antennas together or I must select only one an...

First I make telnet connection - then type "interface wireless scan wlan1" and list of scanned RLANs is displayed at each time as new sweep over 5ghz band was done and new RLAN devices are added to this list. If RLAN is still active in new sweep, atribute A as active is in column FLAGS oth...

Hello, I am using Mikrotik as AP which can recognize available RLAN devices in 5ghz band (in whole its range) by wireless scan and add information about position of actual scan from external GPS to own application. Therefore in API responses I didn't get all available information from this scan (not...

Please, how can I get Flags (I am meaning A as active B as bridge ...) in API wireless scan, because I get only MAC, SSID, Level ... but if was scanned more wireless devices, that in this list is also devices, which isn't active anymore and from this list is not possible resolve which from this devi...

Hello, 1/ I am testing API on routerOS v3.33 and I receive not same values as If scan was running on telnet connection, exactly I see Adress, ssid, level, noise, sn, radioname, but not Flags (if scanned APs are active, or if is it Bridge and so on). In telnet is possible to see which APs are still a...

Hello,
Ruterboard RB500 series was buyed with RouterOS v.2.9.45 and afterwards was upgraded to v3.22. Is possible to upgrade to v3.33 now? Or is any limitation with upgrading to highest version?
Thanks for Your help.

Thanks to Chupaka for information, that with API this works, I will test it as soon as buy new one AP and I hope that it will be very soon (therefore I have routerboard with RouterOS, which could be upgraded up to v3.22).

Also thanks mrz for this simply solution.

Have a nice day

Hello, I use wirelless scan under telnet initiated from telnet indy component under delphi (therefore in winbox is not possible to copy scanned result to clipboard as text) and if a scan is running, that I'm not see full length of SSID name, but only first 10 characters ended "...". I read...

Hello, I have similar problem with wireless scan and API, You can see answer from janisk: "scan, torch, ping and other commands of this type (some special tool have to be invoked to see output) currently does not work or do it partially (in case of ping)" or see this topic: http://forum.mi...

Hello, I use wirelless scan under telnet initiated from telnet indy component under delphi (therefore in winbox is not possible to copy scanned result to clipboard as text) and if a scan is running, that I'm not see full length of SSID name, but only first 10 characters ended "...". I read...

Hello, I am try demo API Delphi (downloaded from WIKI) and many command working fine, but If I would like to apply command /interface/wireless/scan with parameter =number=wlan1, scan will running and I see !re in aprx. 1 sec interval (it looks that something is received) but without any arguments (v...