http://l7-filter.sourceforge.net/devstatus (very small document) lartc.org SEEM DEAD My question is dedicated to the staff developer. Since the linux kernel has not updated programs to manage traffic shaping, MikroTik how will solve the problem of traffic shaping based on linux kernel? Very thanks f...
http://l7-filter.sourceforge.net/devstatus (very small document) lartc.org SEEM DEAD My question is dedicated to the staff developer. Since the linux kernel has not updated programs to manage traffic shaping, MikroTik how will solve the problem of traffic shaping based on linux kernel? Very thanks f...
After various suggestions that you have kindly give me in this forum to solve serious problem of Extensive Data Loss but for me with any solution, I have decided to travel an other way... I have installed 2 identical CPE (RB411 with interface type Atheros AR5413) so, same model, hardware, firmware, ...
Hello Flynter I too have the same problem with packet loss and continue disconnections. At this point I believe that the only solution is to create a identical link (same locations, same hardware, same release software, same all....) to the existing one and see if they behave similarly, if the disco...
Hi staff This is the old model: routerboard: yes model: "532" serial-number: "111301D4C5E8" current-firmware: "2.5" upgrade-firmware: "2.12" I don't have configuration because we have used it only for test, but signals level appears more more stable and with a...
This is the normal situation of our new AP: # INTERFACE RADIO-NAME MAC-ADDRESS AP SIGNAL-STRENGTH TX-RATE UPTIME 0 wlan1 000C42313C3F 00:0C:42:31:3C:3F no -66dBm@6Mbps 54Mbps 2h1m18s 1 wlan1 000B6B4E2C7C 00:0B:6B:4E:2C:7C no -64dBm@6Mbps 54Mbps 47m35s 2 wlan1 000C42313C3C 00:0C:42:31:3C:3C no -77dBm...
Have got no idea what your setup is you want. However, most important, make sure routing is correct. Every thing can ping each other. After that it should not be a problem.
I'm trying for days to find a way to create a type of network so that: My situation is as follows: pc1 88.137.199.30/24 through router1----> (to master router) pc2 88.137.199.178/24 through router2----> (to master router) (from clients) ---> Master Router gw 88.137.199.1 loopback----ether0======>INT...
I'm trying for days to find a way to create a type of network so that: My situation is as follows: pc1 88.137.199.30/24 through router1----> (to master router) pc2 88.137.199.178/24 through router2----> (to master router) (from clients) ---> Master Router gw 88.137.199.1 loopback----ether0======>INT...
SOLVED I have disabled transparent proxy with command: ip hotspot user profile set USERPROFILENAME transparent-proxy=no I post my ip hotspot export: /ip hotspot profile set default dns-name="" hotspot-address=0.0.0.0 html-directory=hotspot \ http-cookie-lifetime=3d http-proxy=0.0.0.0:0 log...
Greetings to all We describe the following scenario: ---------------------------- | pc client with dhcp client | ---------------------------- | dynamic ip 10.5.50.254 | | ip addr 10.5.50.1 ---------------------------- | mikrotik rb450 hotspot | ---------------------------- | ip addr 192.168.4.2 (eth...