CCR1036-12G-4S on v6.1 lost ping to CCR after winbox attempt. any help? Reply from 192.168.10.252: bytes=32 time<1ms TTL=64 Reply from 192.168.10.252: bytes=32 time<1ms TTL=64 Reply from 192.168.10.252: bytes=32 time<1ms TTL=64 Reply from 192.168.10.252: bytes=32 time<1ms TTL=64 Request timed out. ...

CCR1036-12G-4S on v6.1 lost ping to CCR after winbox attempt. any help? Reply from 192.168.10.252: bytes=32 time<1ms TTL=64 Reply from 192.168.10.252: bytes=32 time<1ms TTL=64 Reply from 192.168.10.252: bytes=32 time<1ms TTL=64 Reply from 192.168.10.252: bytes=32 time<1ms TTL=64 Request timed out. R...

CCR1036-12G-4S on v6.1 lost after winbox attempt Reply from 192.168.10.252: bytes=32 time<1ms TTL=64 Reply from 192.168.10.252: bytes=32 time<1ms TTL=64 Reply from 192.168.10.252: bytes=32 time<1ms TTL=64 Reply from 192.168.10.252: bytes=32 time<1ms TTL=64 Request timed out. Request timed out. Reque...

can't set correct date and time in v6.0rc13 on CCR1036-12G-4S. please check [admin@ccr] > system ntp client print enabled: yes mode: unicast primary-ntp: 202.90.158.4 secondary-ntp: 216.218.254.202 poll-interval: 16s active-server: 216.218.254.202 [admin@ccr] > sys clock print time: 08:13:48 date: j...

i'm not sure if this is a user manager bug or config error. actual time is 11:59:59 but user manager log shows 04:49:21. i want to generate a user with 16hrs time limit from the first login and only allowed to login from 7am to 11pm. please help :) [admin@MikroTik] > system clock pr time: 12:59:49 d...

Default without config. Upgraded to 5.22 stable. Seems ok by now. Thx for the reply.

LOT of "request timed out" in rb1100AH(192.168.10.12/24)ETH9 to laptop(192.168.10.11/24)LAN. only laptop connected to RB. anyone has the same problem? solution? routeros 5.7 / firmware 2.37 Reply from 192.168.10.12: bytes=32 time<1ms TTL=64 Reply from 192.168.10.12: bytes=32 time<1ms TTL=6...

thanks toni

copy. thanks chupaka & dasiu

what version? some 5.0rcN had this but - just upgrade

v5.0rc11 on x86

any info about this? console crashed after the "?"

[admin@wo0T] /interface ethernet>
Console has crashed; please log in again.

reset the modem to factory default...set WAN=bridge,rfc1483,llc,8,35 LAN=default(192.168.1.1/24)...put that x.x.x.81 255.255.255.248 or whatever public i.p in your mikrotik router, or test the i.p in pc/laptop

pls post the print screen of WAN and LAN in zyxel modem?

static ip or pppoe in rb1100...try this modem config

wan:



lan:

hi i want to know my total p2p traffic in my network. is it possible to mark and graph all p2p?

cool project i'm using visio

hope this will help





xone87@yahoo.com

127 hehe

happy hew year all!

is it possible to login to hotspot via pptp?

we are testing upstream bandwid streaming now anybody can access mms://202.78.124.3:1234

working like a bomb here in South Africa. The stream is transferring on average 70kbps.

Nice music!

audio codec: mp3 @ 64kb/s re-stream from eve radio

its connected to a different router 192.168.10.1/24, i'll try use mikrotik as gateway...

cool! up and running! thanks chupaka

btw stream ip >>> mms://202.78.124.3:1234

its connected to a different router 192.168.10.1/24, i'll try use mikrotik as gateway...

hello!

additional info:

server ip: 192.168.10.254/24
server port: 1234

mikrotik wan ip: x.x.x.x/24
mikrorik lan ip: 192.168.10.10/24

streaming server tested ok using a laptop 192.168.10.35/24, need to redirect port 1234 from wan to lan

thanks!