MikroTik

jondavy

wifiwave2 package for 802.11ax (WiFI6) hardware is not made by MikroTik anymore, it uses the Qualcomm driver from chip manufacturer. You get much faster support for new chips, increased speed, a lot of new protocols, and possibly even much faster time to WiFi7 adoption. In turn, you lose some Mikro...

jondavy

could you refactor the package
CapsMAN (controlled ap management)
for
CentralMAN (Central Managed Controller)
and include a tr-069 mini server

jondavy

guys I created a topic asking for limited winbox/dude/ros_command connections back
help her by requesting
because without it the dude no longer has the capacity to manage a large network

viewtopic.php?t=189025

jondavy

this limit of simultaneous winbox/dude connections is generating a very big problem in our network, as our network is a little big, each region has its router and sectors mapped by the dude and I select that the device is RouterOS, with this I manage to monitor the signals of wireless clients and su...

jondavy

here also seems to be out in brazil and paraguay

jondavy

if I have many networks in ip address these routes are inaccessible after reboot, only disabling the address and activating it again come back
this when I have more than 150 addresses in ip address in ccr1036-8g-2s+

jondavy

unfortunately in my region the legislation and the 5g license cost is unviable and totally impractical (south america), it is much cheaper to work with gpon than with 5g. if at least mikrotik launched a gpon line because here everyone is using gpon

jondavy

in CRS305-1G-4S+ (ARM) v6.46.7 SFP+DAC of any brand not work in 10G mode UPDATE: not work between Huawei MA5608T into 10GE port and CRS305-1G-4S+, with mikrotik dac, Ubiquiti Dac, works only with some models of optical sfp+ transceiver (I deduce that it may be some driver missing from his ARM platfo...

jondavy

Can you please test with smaller packets as well?

yes, with smaller packet 50 works, this fails only when i need to ping in vlan inside vlan with mtu1500

jondavy

I work at an ISP I have a network with many QinQ VLANs because we have many services in place. I recently migrated from a CCR to CHR, however when I need to pass packets with a size of 1500 with vlans within a vlan within the bridge it does not pass if the packet is 1500, it does not happen when I p...

jondavy

Abilities with script to scan scan and connect into SSID with best signal when SSID start with criteria example: This is a very important facility for field installations because the technician will not need to link or the notebook will be expedited or serviced, as is the case with GPON (expedited i...

jondavy

hello guys I didn't understand very well,
in my case I want to host 2 websites on the same public IP as it would be?

website1.mydomain.com.py
website2.mydomain.com.py

internal IP website1: 192.168.88.100
internal IP website2: 192.168.88.200

how would it look in that case?

jondavy

any news?

if you could do an OLT with the software just untag VLANs would be enough,

and a ONU-GPON-to-Copper (unmanageable)
and a hAP-GPON-ONU

jondavy

:put [/interface get ether1 link-downs];

jondavy

How i can Grap it in the dude? This part is more experimental as it depends on how you want to graph the data. Under Probes you can do this in two ways (both if you want). The more useful one to have graphing of Voltage is to create a Probe linked to a function. Create a new Probe called Voltage Typ...

jondavy

any news?

jondavy

I was at MUM Foz, Brazil, and I heard that you are going to launch an OLT mikrotik for early 2020, is that true? It would be great, so I do not buy OLT from another brand and wait for the release !!

jondavy

note that many customers and operators use GPON
Normis, have you planned to launch any solution in the GPON? Branch, as we need OLT and ONUs from MikroTik urgent

jondavy

well that you could launch new hardware this way High performance AC radios with Low cost N radios for spectrum analysis only, so create a protocol that would automate spectrum analysis and deliver it on screen with the main usable channels, without the need to use CLI commands, so any layman would ...

jondavy

I have the same problem here using a CCR 1036 ros 6.45.6, to ensure link to business customers i use parent queue and tonight the CPU reached 100% in several moments and profiles saw that was the queue with a 450 queues pppoe Is a parent to bandwidth guarantee business customers, and with that incre...

jondavy

we really need a solution with embedded routers,
because the others or the web interface is very limited or all by cli

+1 for MikroTik GPON products

jondavy

hello, yes we really need that, Does anyone know if there is already a solution ?. because here we are a WISP and I deliver to the technician a notebook with a plain text script containing several users to configure a DISC Lite or hAP for example with several users with various privileges and I woul...

jondavy

really,
With the recent security holes mikrotik should implement a native way to do a massive update
this would even help the brand promote itself and avoid forum threads because of outdated software,
as many do not upgrade as it is impossible to update hundreds of CPEs manually

jondavy

have they discontinued to launch news?
it would be great an OLT and ONT of them

jondavy

We need an OLT from MikroTik

jondavy

the ability to scan ssid via station script, thus automating and choosing the signal-based ssid, ccq in a simple way with one function

jondavy

same problem here
I try to login for romon, but I get invalid user or password

jondavy

All are in the market for PON ISPs technologies and companies need this, Fiberhome, ZTE, TP-LINK, Chinese generic, until Ubiquiti has, Huawei is in an era of indecision, we are in the era of ultra-speed, delivering 2,3,4 Mega via wireless and without spectrum analysis in the AC series are becoming u...

jondavy

muy bueno, tambien necesito algo asi, pero vas a tener que liberar muchos hosts de Facebook y haciendo eso tus clientes van a poder navegar en Whatsapp Instagram y Facebook gratis sin necessidad de autenticarse pues ellos se hospedan todos en la misma base de datos osea en el mismo servidor de faceb...

jondavy

new cloud only exists since 6.43

and what happend with the bugfix updated version? (6.42.10)? Will you stay out?

jondavy

Hello MikroTik team, We need a viable OLT GPON alternative in the Market, you would not be copying to Ubiquiti or FiberHome, in fact they would be creating a more vivid alternative as happened to wireless technology in the past and you have revolutionized

+1 to MikroTik OLT

jondavy

I believe that MikroTik is preparing full-featured DNS server package as Christmas surprise. To be released a year or two after RouterOS v7.

Wow, that would be great!!

jondavy

is not allowing to create qos scripts with parent queue with hotspot,
with pppoe works normal

jondavy

in queues tree in parent does not appear to select queue of hotspot users like <hotspot-john>

jondavy

I was with my cloud core router restarting every day saying kernel failure, I decided to update to last version and it did not solve, I decided to buy another cloud core and it continues with the same problem says: system,error,critical router was rebooted without proper shutdown, probably kernel fa...

jondavy

the wireless menu not show and not work with this winbox

jondavy

CapsMan datapath bridge settings not work

jondavy

PPPoE Server not work into VLAN Interfaces reverting back to 6.39.1 that works perfectly tested with RB3011 and CCR1009 I use a vlan to deliver to each neighborhood or sector, /interface bridge add name=LAN /interface bridge port add bridge=LAN interface=ether5 /interface bridge port add bridge=LAN ...

jondavy

seeing the vulnerabilities found in RouterOS and the number of devices in our networks, I can not find ways to update everything automatically, it would be great an emergency solution to update the packages, routerboot and also block some services, but for this we need Dude do it! .

jondavy

PPPoE server does not work on VLAN interfaces when cpe (customer) is of another brand that is not mikrotik

jondavy

mikrotik team, no matter how long it takes, ios, junos does not have a weekly update, more are stable, the important thing is that the software stays stable,
so keep it up

jondavy

Currently there is no equivalent to cisco TE load-share in RouterOS.

from my point of view this is not the solution because it remains unsolved

Please implement TE Load -share on RouterOS
For years I've been waiting for this solution on the routeros

jondavy

What's new in 6.41rc50 (2017-Oct-30 10:13):
*) radius - limited RADIUS timeout maximum value to 3 seconds;

do not do this, our system on average 1~5 seconds to process the radius package
please leave this field customizable

jondavy

here I am using a CRS125-24G-1S with the last stable version (6.40.4) and also tested with the 6.41rc47, without rules like a simple switch between all the ports passing in average 150MBPS and also I am having packet loss

jondavy

Currently there is no equivalent to cisco TE load-share in RouterOS.

+1
Please!!!
that would be great, we need this a lot !!!

jondavy

you could add support for load-share in mpls as well as cisco routers and other brands do,
so it could add and aggregate the throutput of ring links that are backed up professionally using mpls and without having to make a mac-gyver on top as bonding

jondavy

Hi folks, I'm in a struggle with MPLS Traffic Eng in RouterOS. Let's put an ASCII diagram to help me explain: ... R1 ... Tail ----- R2 R3 ----- Head *** R4 **** - 100M . 10M * 50M So far I'm able to establish two TE tunnels between R2 and R3. In fact, they behave very well in a 1+1ish scenario. But...

jondavy

What's the difference between /interface ethernet switch vlan/ports and the bridge VLAN implementation? What is the correct way to create a switch with multiple VLANs (tagged and untagged) with a management IP on a vlan? I believe that the new implementation inside bridge of tag and tag was very si...

jondavy

+1 in winbox and webfig

jondavy

spectral-history not work
tested in SXT Lite5

jondavy

Charger and step-up converter I find anywhere,
I thought he was going to have at least one remote monitoring software
Because we need to have remote management of the towers and what happens in them,
I do not see an advantage in buying it if it is not manageable

jondavy

into /tool graphing Is recording the graphs with wrong time

jondavy

into Wireless Registration Table, mac-ping, mac-telnet not work

jondavy

2 years later waiting.. Here I removed all the APs and AC stations and put the N equipment and when necessary I happened to use other brands (I am seriously thinking of changing everything to another brand, because I need more througtput), Because 2 years later mikrotik AC technology does not work p...

jondavy

when i set:

/interface bridge settings
set use-ip-firewall=yes use-ip-firewall-for-vlan=yes

is not catching VLAN QinQ traffic into firewall

jondavy

me too
Here we have link from 2 ISP
With 1 ISP I used HTB to guarantee bandwidth
Now with 2 ISP link how to make sure band when one of them fall?

jondavy

How can I see how many sectors on the nand have already been written and if there are bad blocks on the Cloud Core Router?

jondavy

You can guess and try according to the wireless snooper. just that's the problem, here in my city the spectrum is very polluted and the snooper is very limited, as it has many here who use 3,5,8,10,30,60,80,160mhz of channel-width with owners protocols often are not detected by the snooper, and eve...

jondavy

here in my business I downloaded all the MikroTik devices with AC because without the spectrum analyzer is unfeasible be used, it would be like driving with blindfolded, how to know the right channel?

jondavy

Can't be more agree Priority should be like: no. 1: Spectral scan / history on ac units. no. 2: Spectral scan / history in background for ANY wireless unit. no. 3: Sync no. 4; SSID (and other) identifying capability included in the same spectral scan process. no. 5: Power output reading in ac units...

jondavy

Romon neighbor bug:
when the identity is too long it appears as mikrotik into romon neighbor

and also the option to port forbid not working

jondavy

please add CCQ to CapsMan registration-table

jondavy

I use some sector that has AC technology but use N because of the legacy clients. the problem is that the cards that are compatible with AC even changing to the N channel-width can not be changed for 10 or 5MHz I believe it is a matter of correction or software implementation use 10mhz because in th...

jondavy

and when we have this fundamental detail for monitoring the CAPs can be used professionally?

*) CapsMAN added CCQ field into Registration Table

I'm not the only one you need, this was already asked many times in the forum
because that way I will not use or recommend to my business clients

jondavy

Still no band steering and CCQ in CAPsMAN
If want to use it in a commercial environment, 2.4 and 5G in a same SSID is a basic requirement !!!!

really I'm just not using it and installing the companies that attend for lack of decent monitoring
CCQ is an essential basic thing

jondavy

jondavy - Please provide an example of export which you are not being able to import afterwards /interface bridge add name=LAN add name=WAN1 add name=WAN2 add name=WAN3 /lcd set backlight-timeout=never default-screen=stat-slideshow read-only-mode=yes /lcd interface set sfp-sfpplus1 disabled=yes set...

jondavy

Please add CCQ to CapsMAN

jondavy

MikroTik RouterOS v6.36rc4 is released.

*) tunnel - added option to auto detect tunnel local-address;
How exactly this works?

you not need add local address to an tunnel only the remote address

jondavy

multiple windows of ping is really usefull

jondavy

/lcd export import not work properly

jondavy

you could improve your graphics library and implement the Dude client in Winbox so everything would be simpler and more unified, enhance the graphics library would also be advantageous for other factors such as spectrum analyzer, would be more beautiful. perhaps WinBox would be heavier, nowadays nob...

jondavy

would be great for some hotels, large companies and some internet providers that use CapsMAN to have a unified management of all customers, more to this missing some details (which from my point of view are essential): CCQ: one of the first things I look at a station when it is connected in a sector...

jondavy

please add into the CapsMan Registration Table fields: CCQ, RadioName, Distance, and the option to scan for free frequencies for each cap and also the Channel Width 10mhz I use CapsMan to have a centralized management of all my sectors and customers with SXT of my Wisp so the request of the CCQ and ...

jondavy

mANTBox 15 not work in 10mhz with manual frequency

jondavy

on CapsMan channel width=10mhz not work

jondavy

when I have many address-list enabled, more than 300, and on mangle one mark-routing them to, the router restarts after a few hours tested on RB2011UiAS edit: in fact it does not restart, the traffic to, if I try to ping appears no buffer space avaliable I that activated the whatchdog that the addre...

jondavy

if I change /system logging action set 0 memory-lines=1000 name=memory target=memory per /system logging action set 0 memory-lines=10000 name=memory target=memory the router works for a while, but after crashes, no more traffic goes by, so if I restart the router hangs in all previous versions teste...

jondavy

please add CCQ column in caps-manager in registration-table,
I just need this vital information to be able to migrate all my sectors of my wisp to CAP
to be able to control the CCQ of customers quickly

jondavy

Requests for CAPsMAN bug fixes and new features, based on my experience with the current RC version: 1. {Nice to have} Add "CCQ", P Throughput" and "Signal to Noise", "Encryption" and "Group Encryption" and "WMM Enabled" fields to CAPsMAN Regis...

jondavy

dns cache stop work after some time
on RB2011UiAS with 6.35rc32

jondavy

please define as default this option in OmniTik and other RouterBards

/interface ethernet poe settings set ether1-poe-in-long-cable=yes

because the outputs PoE outs do not work if not activated this function,
because many find it defective.

jondavy

please add to the roaming options
roaming-minimum-signal=XX
Roaming minimum-CCQ=XX
(To start the scanning process)

jondavy

vlan not working on bridge interfaces

jondavy

in fact most here already tried to implement it, so that the "API" that you say that mikrotik available is limited, it does not have many options, At least she chose to implement some dynamic web language that could make external communication such as PHP, ahi yes it would be possible this...

jondavy

you guys could simplify the alignment tool,
for when clicked the button "alignment" (temporarily) him into alignment mode, and automatically caught the mac / AP ssid or railway on which was connected and directly boot the Sound alignment

This would simplify and expedite would optimize all

jondavy

Here we are using several VPLS and also this fall and coming back after a few minutes,
with version 6.33.5 (stable) in RB1100AHx2, RB1100AH

jondavy

Yes Yes even there it is said that some famous routers already have integration as D-Link, Netgear, Cisco, Meraki, Open Mesh http://us.dlink.com/business-solutions/facebook-wifi/ http://www.netgear.com/landing/facebookwifi/ http://www.cisco.com/c/en/us/solutions/enterprise-networks/connected-mobile-...

jondavy

you could create a wizard for CAPsMAN to simplify installation of lay people, and thus further popularize the platform and protocol
just as there is a wizard for Hotspot and DHCP

jondavy

Winbox not properly shown at the top of the page if I select all
Time, Date, CPU, Memory and Uptime

jondavy

in Winbox and in terminal in wireless section, hide the option and button of the CAP if the wireless-cm package is not enabled or installed or warn that to use this option you must enable the wireless-cm package it does not make sense appear this option without the package and it will not work, and ...

jondavy

WinBox queue, when used Parent: x does not show the hierarchy only after some filtering column

jondavy

Uhuull LOLL Very thanks!!!!!.....

jondavy

the CAP should have a mandatory option: discovery-method = and in it one of the required attributes: By interface, by CAPsMAN-Address, or by CAPsMAN-Name, because without any of these attributes the CAP is not adopted by CAPsMANAGER and does not work anothers possible bug: in CAPsMAN> Channel to tx-...

jondavy

add min-cache-object-size it often does not make sense to cache files of 1kb or even smaller just using resources and processing without giving any gain bandwidth RegEx url for dynamic sites as Windows Update, Antivirus updates, among other sites traffic tab graph showing the input and output throug...

jondavy

ak yolo enviaba utilizando API en Java pero en terminal posiblemente va a ser casi lo mismo solo q con puerto usb

"/tool/sms/send port="usb1" phone-number="92023789" message=\"" Hola Mundo "\""

jondavy

you guys could add the option by default to show the connection DNS:port
it would be very interesting because many times when it is necessary to quickly diagnose what is having high consumption expedite the process

jondavy

It may be a breach yes, but will again be compatible with all websites
Plus it can be circumvented if warned that the certificate with the domain that is in it is only for testing purposes and should not be used in production,
more like a small house that would work, and hotspot again be used more

jondavy

to the RouterOS7 go out and be stable at mikrotik has lost many customers who in fact is losing what good is having a CCR1072 you can not close a FullRouting in BGP, all BGP processing goes all a core only unless the ccr1072 is used only for PPPoE server, ultimately becomes a toy for testing as a le...

jondavy

you could add to Hotspot HTTPS by default, so that it is compatible with all websites https by default, and eliminate once the http from my point of view this would be possible if you might give in Routerboards a signed certificate with a domain to you predefined eg https://hotspot.mikrotik.com that...

jondavy

It would be great to implement the NV2 and the ability to select for each station the preferred sector

Imagine all sectors with the same SSID, and have all managed, (which was not possible in 802.11)
it would be great for all ISPs would be more dynamic home there is a problem with some sector

jondavy

in the Caps Manager on Access-List
the interface option does not work, the station continues connecting into any Radio

jondavy

it would be interesting to show comments in the active dynamic PPPoE interfaces registered in Secrets
and also the comments registered in hotspot users to appear in Active users

as with the wireless tables

jondavy

Channel Frequency: allow to select auto (maybe this is not used much, but in polluted areas with many Radios that would be interesting) Add: NV2 Protocol (for WISP's using sectors with CAPS and has sxt mikrotik as stations) on CAPs Access List: (for WISP's when you have several sectoral) add the o...

jondavy

Please add support for multicore BGP in CCR's !!!

jondavy

https://www.facebook.com/business/a/facebook-wifi/businessowner Yes Yes Yes guys could also provide factory already an SSL certificate (https) with a certificate signed by you and he was already suggested when creating the hotspot eg "auth.mikrotik.com". I know this would generate another...

jondavy

yes, here too my commercial clients ask what device I use to force people to follow, like, share my fan page because they see that here there are other trades already do
And in this regard unfortunately I have to opt for other brands

+1 Integration with social networks

jondavy

You could throw a CPE 802.11a/n Low Cost with a High Gain antenna for long distance customers with low purchasing power, as a grid or parabolic, that is attachable, even if it is low power, the gain would more offset

sorry m bad english

jondavy

We are in the modern era and social networks are the most powerful and indispensable forms of marketing, the hotspots that are updated are not back, The latest hotspots already make integration with Facebook, Twitter etc .., eg: purplewifi.net, zoottle.com, fusionwifi.com, social-hotspot.com, fanswi...

jondavy

https://under-linux.org/showthread.php?t=134749

jondavy

but not show cable length

jondavy

it would be interesting to add in the Interfaces Ethernet state a tab with the cable length, and possible problems with wires
I do not know if that would be a hardware implementation or would be possible,
more would be interesting to remote diagnostics for example.

jondavy

feature request

By default, when you select a RouterBoard in the neighbors, set as the default
session: <own>
Note: <identity of RouterBoard>
Group: leave blank

jondavy

+1 for IGMP snooping

jondavy

please continue The DUDE project, no longer simple and complete software like him to management
as well as the competitor has the AirControl AirCRM etc ..

jondavy

CCR1009-8G-1S-1S + with packages v6.29.1 crash after several hours on average througtput 100MiB Running ospf+vlan+PPPoE-Server+simple queues in fact specifically happened the day before yesterday and yesterday 21:00 second comments of many colleagues who were also affected this is the 'Leap Second'...

jondavy

CCR1009-8G-1S-1S + with packages v6.29.1 crash after several hours
on average througtput 100MiB Running
ospf+vlan+PPPoE-Server+simple queues

jondavy

jondavy

why CCR series do not show Bad Blocks?
/system resource print

jondavy

you could unlock this feature on your license, I believe this is the only obstacle that still prevented many providers and q work provider and others I know to use any SXT (among others) as AP, while other competitors there is no such limitation and I believe this would be a great advantage to you b...

jondavy

you guys could improve the spectrum analyzer in WinBox, only in a more intuitive, simple, and practical, it would be just quickly look at the screen without scroll and already have a conclusion on the same screen and we do not need to wait that long the analysis of each frequency and that generates ...

jondavy

the package all_packages-ppc-6.28.zip this damaged after installation and check
and also another bug:
he reappears the WebBox interface (which does not work) in RB1100AH

jondavy

the key event DEL (delete) stopped working, not delete any item when selected in any table within winbox

jondavy

+1, but for all PPP connection types, not only PPPoE.

yes, its really a great idea to all, PPP, DHCP-Server,wireless etc...

jondavy

Do not forget the BGP optimization, not leave it to last
http://forum.mikrotik.com/viewtopic.php?f=14&t=94241

here in Brazil when it comes to BGP multipeer everyone is going to other solutions because everyone is getting scared

jondavy

I use very BTEST (bandwitch test) to test links and nothing more practical than you have it along with an application that you always have in your pocket, Winbox another feature request, when logged in Winbox, set as default selected Dashboard>time, date, cpu, memory, uptime and settings> hide passw...

jondavy

Would be a great idea to add in / ppp profile the ability to run scripts when someone connect, or disconnect, as well as hotspot user profile on-login / on-logout because I like many people have several scripts that have to be running seconds in second, and so so would run if someone connect / disco...

jondavy

feature request:
ability to add simple queue target: to all PPP, to be able to use the parent queue dynamically for PPPoE connections

jondavy

feature request:
ability to add simple queue target: to all PPP, to be able to use the parent queue dynamically for PPPoE connections

jondavy

in PPPoe Client add the option to add a column'service' because I have several interfaces with several pppoe servers with several'service name' so you can filter connections by'service name'

and add the option to filter logs

sorry my bad english..

jondavy

+1
That would be great, by type of topic, in words, and when you have only one pppoe server for a very large network (for example), to filter and monitor a client or connection specifies only

jondavy

would be great in the WinBox within the filter you are typing, and in real time it will already searching and filtering

jondavy

In CloudCore in /system resources not appear the Status of:
Sector Writes Sice Reboot
Total Sector Wrires
Bad Blocks

jondavy

I did upgrade from the menu /system upgrade and were not installed some packages defaults as MPLS, then I had to manually reinstall the MPLS package

jondavy

I scheduled a script I /system reboot at dawn to uninstall a package that is not used "wireless" in the morning just gone all pppoe-outs, vpls and bridges and all interfaces again be named as factories ether1 ... ether13 was using version 6.12 on a RB1100AH, then went back to version 5....

jondavy

I scheduled a script I /system reboot at dawn to uninstall a package that is not used "wireless" in the morning just gone all pppoe-outs, vpls and bridges and all interfaces again be named as factories ether1 ... ether13 was using version 6.12 on a RB1100AH, then went back to version 5.2...

jondavy

all pppoe and vpls interfaces are disappeared , but still working,
was using version 6.11 CCR-1-1612G, now updated to version 6.12, and how it has all ok

jondavy

why this script does not work?

/ ip hotspot user profile remove [ find default=no ]

and in pppoe profiles works perfectly?

/ ppp profile remove [find default=no ]

tested with RouterOS 6.7 and 6.9

jondavy

Possible Bug I have a bridge interface that contains several ethernet in, just yesterday I changed this bridge STP, RSTP was to NONE, then the LCD touch also froze and stopped the traffic and navigation stopped, the only solution was found in time to restart soon it started functioning normally, I d...

jondavy

then one of the things I did was insertthe queues below
/ ip hotspot user profile
SET [find default = yes] queue-insert-before = bottom

but I managed to work around the problem temporarily excluding the queue hs-<hotspot1> generated by the rate-limit(this blank) hotspot profile

jondavy

I'm also having a similar problem, the customer has the limitation in queue, however he sails with much more speed, and shows no traffic queues, everything is reset in the counters on queue, it happens using hotspot
I'm using the CCR-1016 12G ROS v6.6

jondavy

I can not make more space because my page hotspot is great,
and the post was duplicated because after I posted I went back to page back and he posted again.

jondavy

ROS 6.3 when the agent has little space and will soon RouterBoard in system packages check for updates and download, it is in a loop trying to update and never leaves
this bug was found in version 6.3 on a RB 1100AH (PowerPC)

jondavy

ROS 6.3 when the agent has little space and will soon RouterBoard in system packages check for updates and download, it is in a loop trying to update and never leaves
this bug was found in version 6.3 on a RB 1100AH (PowerPC)

jondavy

Hi guys I think interesting function in IP / Neighbors (and other places) you can create a new instance of Winbox, asking and getting Login factor authentication in Another RouterBoard without the need to open a new executable Winbox

jondavy

jondavy

I use this way and it works very well here, not have pool conflict because as the ip and it is used in / ip pool used

Search found 146 matches