Community discussions

Search found 177 matches

by engineertote
Sun Nov 09, 2014 2:41 pm
Forum: General
Topic: MT ,, we need real stable version ,
Replies: 10
Views: 2344

Re: MT ,, we need real stable version ,

MT guys .. any response ?!!! :? :?
by engineertote
Sat Nov 08, 2014 12:59 am
Forum: Forwarding Protocols
Topic: IP Settings for core network router
Replies: 1
Views: 1231

Re: IP Settings for core network router

i think its better to set RP filter to strict
Hello,

this is screenshot from core router, which have BGP peering with two upstreams provider.

Is this right? Thanks.
Image
by engineertote
Sat Nov 08, 2014 12:53 am
Forum: Forwarding Protocols
Topic: BGP ECMP (multipathing)
Replies: 36
Views: 11381

Re: BGP ECMP (multipathing)

very interested

MT guys ,, can you please update the post if you are going to add this feature or not ?
by engineertote
Sat Nov 08, 2014 12:40 am
Forum: General
Topic: MT ,, we need real stable version ,
Replies: 10
Views: 2344

Re: MT ,, we need real stable version ,

exactly Mikrotik Guys please we need one real stable version in the year instead of releasing monthly non-stable testing versions since you start V6 and till now we never see any 100% stable version for years i'm sending to MT support asking to fix the queue issue that its can not limit high BW , an...
by engineertote
Fri Nov 07, 2014 12:53 pm
Forum: General
Topic: MT ,, we need real stable version ,
Replies: 10
Views: 2344

Re: MT ,, we need real stable version ,

do you think so :? Mikrotik Guys please we need one real stable version in the year instead of releasing monthly non-stable testing versions since you start V6 and till now we never see any 100% stable version for years i'm sending to MT support asking to fix the queue issue that its can not limit h...
by engineertote
Fri Nov 07, 2014 12:44 am
Forum: General
Topic: MT ,, we need real stable version ,
Replies: 10
Views: 2344

MT ,, we need real stable version ,

Mikrotik Guys please we need one real stable version in the year instead of releasing monthly non-stable testing versions since you start V6 and till now we never see any 100% stable version for years i'm sending to MT support asking to fix the queue issue that its can not limit high BW , and they j...
by engineertote
Fri Oct 17, 2014 5:56 am
Forum: Wireless Networking
Topic: 802.11 ac setup guide
Replies: 2
Views: 1493

Re: 802.11 ac setup guide

normis .. thanks for your reply

i do already configured the point to point link but i'm talking about the power levels , data rate fine tunning to get the best results

now my signal is 42/42 but the ccq not going more than 40% , BW test is 100Mbps in Tx side and 150 Mbps in rx side ,, any advice
by engineertote
Wed Oct 15, 2014 7:14 pm
Forum: Wireless Networking
Topic: 802.11 ac setup guide
Replies: 2
Views: 1493

802.11 ac setup guide

Hello

i just got my first 2 new Netmetal 5 AC , and trying to configure the link .. i can not find any setup guide or symbols references .. any one can help in this .

Thanks
by engineertote
Sun Apr 06, 2014 9:21 pm
Forum: General
Topic: When 802.11ac radio @ mikrotik ?
Replies: 7
Views: 4084

Re: When 802.11ac radio @ mikrotik ?

We are working on it
good to hear :) , any time plan ?
by engineertote
Wed Feb 26, 2014 10:11 pm
Forum: General
Topic: SMB packets coming on unused IPs
Replies: 3
Views: 1384

Re: SMB packets coming on unused IPs

do i need to block port scanner to stop that traffic ?
You never hear about port scanner? :D
by engineertote
Wed Feb 26, 2014 9:13 am
Forum: General
Topic: SMB packets coming on unused IPs
Replies: 3
Views: 1384

SMB packets coming on unused IPs

Hello

i'm tourch my traffic on the WAN interface of my router and i see many packets coming on SMB ports from out side , yes its small packets but its should be not seen on unsed IPs .

can any one explain this pls



Thanks
by engineertote
Wed Feb 19, 2014 1:13 am
Forum: General
Topic: UDP attack
Replies: 5
Views: 1802

Re: UDP attack

i have tried this but its still same :(

If the packets are being spoofed changing IP -> Settings RP Filter to "strict" will help also. You can read more about that here:
http://wiki.mikrotik.com/wiki/Manual:IP/Settings
by engineertote
Mon Feb 17, 2014 1:37 am
Forum: General
Topic: UDP attack
Replies: 5
Views: 1802

Re: UDP attack

yes i do ,but its millions of IPs sending small packets and its impossible to filter all of them .
by engineertote
Mon Feb 17, 2014 12:05 am
Forum: General
Topic: UDP attack
Replies: 5
Views: 1802

UDP attack

Hello my network is attacked by UDP flood :( :( we have facing problem that all our IPs " used and unused IPs " been attacked from out side by huge UDP traffic , the torch show millions of small UDP packets from many different IPs attacking our network , i have tried to disconnect all our LAN interf...
by engineertote
Fri Nov 01, 2013 10:45 pm
Forum: General
Topic: 【Bug】6.xx Queue tree Bug
Replies: 38
Views: 14746

Re: 【Bug】6.xx Queue tree Bug

atu , you can go for simple queue with V6 .


Regards
Ahmed
by engineertote
Sun Oct 27, 2013 5:41 pm
Forum: General
Topic: script to add small subnets to address list
Replies: 3
Views: 884

Re: script to add small subnets to address list

any answers ??!! :( :( :(
by engineertote
Sat Oct 26, 2013 8:27 pm
Forum: General
Topic: script to add small subnets to address list
Replies: 3
Views: 884

Re: script to add small subnets to address list

i want to divide the /23 into small subnets on address list and pools to put each 8 IPs under one limit so i'll have for example each 8 users " IPs" share xx kbps
by engineertote
Wed Oct 02, 2013 7:55 pm
Forum: General
Topic: BW TEST not go more than 1G with TCP
Replies: 6
Views: 1539

Re: BW TEST not go more than 1G with TCP

The Major problem is i have CCR as core router , 2 interfaces been bonding to carry traffic 1700 Mbps . the bonding interface can not pass more than 1000 Mbps " 500 Mbps each interface , means load balance working " . that's why i have checked from/to the router to make sure . i already made several...
by engineertote
Mon Sep 30, 2013 2:39 pm
Forum: General
Topic: BW TEST not go more than 1G with TCP
Replies: 6
Views: 1539

Re: BW TEST not go more than 1G with TCP

for sure i'm aware about this and i have checked the CPU already it was not more than 12% you can simply do BW test to the router from inside and see by urself :( If you have CCR, then you should have some knowledge about networking. You can't say just "is not working more than 1gbps". Details are e...
by engineertote
Mon Sep 30, 2013 1:52 pm
Forum: General
Topic: BW TEST not go more than 1G with TCP
Replies: 6
Views: 1539

Re: BW TEST not go more than 1G with TCP

NOTHING ???!!!
by engineertote
Mon Sep 30, 2013 1:40 am
Forum: General
Topic: BW TEST not go more than 1G with TCP
Replies: 6
Views: 1539

BW TEST not go more than 1G with TCP

Hello i'm testing in the LAB diffrent Mikrotik boards " CCR 1036 , CCR 1016 and X86 " , the test is to do bandwidth test inside the router Router IP : 10.0.0.1/30 and the BW test from inside the router to 10.0.0.1 , with UDP i can get up to 3Gbps but with TCP i can not get more than 1Gbps ?? is ther...
by engineertote
Mon Sep 23, 2013 10:06 pm
Forum: General
Topic: CCR1036-8G-2S+ when ???
Replies: 5
Views: 1167

Re: CCR1036-8G-2S+ when ???

as per Mikrotik sales ,, CCR1036-8G-2S+ is ready and the price is great .. i have order 2 routers to test and see
by engineertote
Sun Sep 22, 2013 6:12 pm
Forum: General
Topic: intel x520-SR2 10Gbps with x86
Replies: 5
Views: 2188

Re: intel x520-SR2 10Gbps with x86

:D thanks for your post

actually i don't have it and plan to buy it .. may be i'll put 500$ to buy and test :(


thanks
by engineertote
Sun Sep 22, 2013 3:39 pm
Forum: General
Topic: intel x520-SR2 10Gbps with x86
Replies: 5
Views: 2188

Re: intel x520-SR2 10Gbps with x86

?????????????????
by engineertote
Fri Sep 20, 2013 3:34 pm
Forum: General
Topic: intel x520-SR2 10Gbps with x86
Replies: 5
Views: 2188

intel x520-SR2 10Gbps with x86

Hello

Any one tried intel x520-sr2 10g pci-e with mikrotik x 86



Thanks
by engineertote
Mon Sep 16, 2013 10:53 am
Forum: General
Topic: CCR1036-8G-2S+ when ???
Replies: 5
Views: 1167

Re: CCR1036-8G-2S+ when ???

asaleh75 thank you

Mikrotik .. any confirmation ??
by engineertote
Sat Sep 14, 2013 3:50 pm
Forum: General
Topic: CCR1036-8G-2S+ when ???
Replies: 5
Views: 1167

CCR1036-8G-2S+ when ???

Hello Mikrotik

can you please confirm when you will produce CCR1036-8G-2S+ , it was planned for Jun then delayed to Aug .. i think its mod of Spt. now :)
by engineertote
Mon May 06, 2013 12:27 am
Forum: General
Topic: cache youtube
Replies: 5
Views: 1402

Re: cache youtube

youtube can't be 100% cached , you can use squid cache
by engineertote
Wed Apr 24, 2013 1:14 am
Forum: General
Topic: RouterOS v6.0rc13 released
Replies: 81
Views: 27530

Re: RouterOS v6.0rc13 released

As its looks from the new versions announcement , i believe that we have to wait more 6 months to get stable version ROS6 . is it possible to have stable version on ROS5 for CCR routers as we purchase them for long time now and not able to use on the production environment untill MT annonce an stabl...
by engineertote
Thu Mar 28, 2013 3:20 pm
Forum: General
Topic: RouterOS v6rc12
Replies: 78
Views: 22784

Re: RouterOS v6rc12

with PPP srerver , more than 400 active user the ping to DNS be non-stable even from inside the router .
by engineertote
Wed Mar 20, 2013 6:27 pm
Forum: General
Topic: RouterOS v6rc11
Replies: 115
Views: 36038

Re: RouterOS v6rc11

Does VLAN work on rc11?

yap its works just fine
by engineertote
Wed Mar 20, 2013 12:02 pm
Forum: General
Topic: RouterOS v6rc11
Replies: 115
Views: 36038

Re: RouterOS v6rc11

the route table reach around 700+ , the router behave up-normal and the latency be non-stable
by engineertote
Thu Feb 14, 2013 1:32 am
Forum: Scripting
Topic: PPP Active connection + simple queue Script
Replies: 8
Views: 4753

Re: PPP Active connection + simple queue Script

its work for me , but if i have diffident service level , any idea how to create script for each service level ? try this script foreach pppuser in=[/ppp active find ] do={ local ip [/ppp active get $pppuser address ] local name [/ppp active get $pppuser name] foreach queue in=[/queue simple find] d...
by engineertote
Sun Feb 10, 2013 11:51 am
Forum: General
Topic: v6.0rc9 released
Replies: 59
Views: 16810

Re: v6.0rc9 released

RC09 , all ethernet not appear and can not access via winbox

/interface print command not responding :(
by engineertote
Tue Feb 05, 2013 9:49 am
Forum: General
Topic: v6 rc8 released
Replies: 26
Views: 6183

Re: v6 rc8 released

in the download page there was RC08 few minutes back , now its RC07 only ??
by engineertote
Tue Jan 15, 2013 12:21 pm
Forum: General
Topic: v6 rc6 released
Replies: 215
Views: 61988

Re: v6 rc6 released

Something wrong with Simple queue ,, the limit not work correctly
by engineertote
Sun Jan 13, 2013 10:06 am
Forum: General
Topic: v6 rc6 released
Replies: 215
Views: 61988

Re: v6 rc6 released

IP pool getting max /24 , even if we set bigger subnet on the pool /22 or /16 its releasing only 255 IP .


Regards
by engineertote
Sat Dec 29, 2012 7:28 pm
Forum: General
Topic: v6 rc6 released
Replies: 215
Views: 61988

Re: v6 rc6 released

100% agree same here Nope. Simple Queue bandwidth control is still not right. At home, capped myself at 14Mb burst with 4Mb sustained. Speedtest are around 9mb. This is really getting old. Yet, if I disable my queue, I get 24Mb. So the speed is there, its just that Mikrotik cannot control it properl...
by engineertote
Sat Dec 29, 2012 7:09 am
Forum: General
Topic: v6 rc6 released
Replies: 215
Views: 61988

Re: v6 rc6 released

having problem with connecting PPPoe users , some users can not connect over PPPoe . we have run small test by changing the service name in the client PC to be as same as the service name in PPP server , the client can connect easily , but by default most clients can not connect . tested with X86 an...
by engineertote
Sat Oct 20, 2012 3:27 am
Forum: RouterBOARD hardware
Topic: Can we see 10G interface in CCR
Replies: 10
Views: 2549

Re: Can we see 10G interface in CCR

u like it hahaha

Thank you Janisk! :D
by engineertote
Wed Oct 17, 2012 12:28 pm
Forum: RouterBOARD hardware
Topic: Can we see 10G interface in CCR
Replies: 10
Views: 2549

Re: Can we see 10G interface in CCR

sounds good , will be waiting

Janisk

Any plan to have 10G interface in future CCR ?

SFP+ modules will work in SFP brackets, but only at 1Gbit speeds.
We always move forward, and always work to include better technology in future products.
by engineertote
Wed Oct 17, 2012 12:23 pm
Forum: General
Topic: My Story with PCQ .. and high latency
Replies: 15
Views: 3790

Re: My Story with PCQ .. and high latency

i tried all RB models and also on X86 its still same issue ,, lets wait ROS V6 hope will fix the issue

Any progress on this issue ?
@engineertote: do you use other hardware ?

br
cm
by engineertote
Wed Oct 17, 2012 4:07 am
Forum: Scripting
Topic: PPP Active connection + simple queue Script
Replies: 8
Views: 4753

Re: PPP Active connection + simple queue Script

do we need to modify the lines in red ,,bellow code local ip [/ppp active get $pppuser address ] local tmp [/queue simple get $queue target-addresses ] if ($ip!=$tmp) do={queue simple add name= $name target-addresses= $ip max-limit=256k/512k try this script foreach pppuser in=[/ppp active find ] do=...
by engineertote
Wed Oct 17, 2012 4:01 am
Forum: RouterBOARD hardware
Topic: Can we see 10G interface in CCR
Replies: 10
Views: 2549

Re: Can we see 10G interface in CCR

Janisk

Any plan to have 10G interface in future CCR ?

SFP+ modules will work in SFP brackets, but only at 1Gbit speeds.
by engineertote
Tue Oct 16, 2012 1:10 am
Forum: RouterBOARD hardware
Topic: Can we see 10G interface in CCR
Replies: 10
Views: 2549

Can we see 10G interface in CCR

Hello Mikrotik

Are you plane to introduce any 10G interfaces in the upcoming CCR series ?



Thanks
by engineertote
Thu Aug 23, 2012 5:18 pm
Forum: RouterBOARD hardware
Topic: v6.0beta3 released!
Replies: 82
Views: 20595

Re: v6.0beta3 released!

RB 439 upgraded from 5.12 to 6.03 beta , router rebooting every 3 to 4 mins , CPU jumping to 100% for sometimes and back normal even with no load .
by engineertote
Mon Aug 06, 2012 11:01 am
Forum: General
Topic: Graph on Queue tree
Replies: 3
Views: 2483

Re: Graph on Queue tree

+1

subscribe
by engineertote
Fri Jun 22, 2012 4:43 pm
Forum: General
Topic: v5.18 released
Replies: 92
Views: 25738

Re: v5.18 released

What's new in 5.18 (2012-Jun-21 17:20): *) wireless - do not use bridge and WDS mode on AP-AP links, causes loops; I'm a bit confused here...; is this a problem in previous version that now is solved? Or is the bridge and WDS funcion on AP-AP links causing loops and in 5.18 is therefore not recomme...
by engineertote
Tue Jun 05, 2012 3:57 pm
Forum: General
Topic: My Story with PCQ .. and high latency
Replies: 15
Views: 3790

Re: My Story with PCQ .. and high latency

Your current config is not going to improve ping times once they saturate their connection. i do understand that my config will not improve that , and even all other QOS standard and optimized config will not do , i believe it related to Mikrotik QOS standards , i think Queues need some big changes...
by engineertote
Wed May 16, 2012 1:56 pm
Forum: Scripting
Topic: script working well with /24 subnet but not with /16
Replies: 6
Views: 1471

Re: script working well with /24 subnet but not with /16

yeah i edit this and its work thanks ,, /16 is very huge i reduced it to /23 and its still huge :) .. the theory is work but day by day i believe the megis QOS is really the best :) @engineertote It should be: new-packet-mark="U0_$y_$x" And why do you need such huge number of mangle rules??? Regards,
by engineertote
Wed May 16, 2012 11:02 am
Forum: Scripting
Topic: script working well with /24 subnet but not with /16
Replies: 6
Views: 1471

Re: script working well with /24 subnet but not with /16

its work ,, thank you from ipcal Address: 10.0.0.0 Netmask: 255.255.0.0 = 16 Wildcard: 0.0.255.255 Network: 10.0.0.0/16 Broadcast: 10.0.255.255 HostMin: 10.0.0.1 HostMax: 10.0.255.254 Hosts/Net: 65534 65535 rules for mangle is crazy but try this... for x from=1 to=254 do={ for y from=0 to=255 do={ /...
by engineertote
Wed May 16, 2012 12:43 am
Forum: Scripting
Topic: script working well with /24 subnet but not with /16
Replies: 6
Views: 1471

script working well with /24 subnet but not with /16

Hi All i use the bellow sicript to add mangle rule for download and upload for each IP in the subnet , it was working well with the bellow format with /24 but now i want to do the subnet /16 , i tried to modifiy the script to work on /16 with no success ,, appreciate any help in this : First mark pa...
by engineertote
Mon May 14, 2012 11:55 pm
Forum: Scripting
Topic: PPP Active connection + simple queue Script
Replies: 8
Views: 4753

Re: PPP Active connection + simple queue Script

i tried 5.12 and 5.16 ,, i believe that there is no difference ..

when u test it is is totall same just copy and past into the script and run the script ??

what version is runing in your routerboard??

paste in the terminal and read the output


I tested in 5.15 and work fine
by engineertote
Mon May 14, 2012 3:10 pm
Forum: Scripting
Topic: PPP Active connection + simple queue Script
Replies: 8
Views: 4753

Re: PPP Active connection + simple queue Script

i tried it but its didn't add any simple queue when the ppp user logged in as active user try this script foreach pppuser in=[/ppp active find ] do={ local ip [/ppp active get $pppuser address ] local name [/ppp active get $pppuser name] foreach queue in=[/queue simple find] do={ local tmp [/queue s...
by engineertote
Sun May 13, 2012 1:12 pm
Forum: General
Topic: LLQ required
Replies: 66
Views: 17005

LLQ required

Hi

i hope to see LLQ in the coming ROS6 .


Thanks
by engineertote
Sun May 13, 2012 1:07 pm
Forum: General
Topic: Block Mikrotik PPPoe client
Replies: 20
Views: 3078

Re: Block Mikrotik PPPoe client

[quote="Feklar"] If you need to control it, then you need to setup traffic control policies to control it. Such as giving them a monthly data cap that they are allowed to transfer through a given account, or charge them extra if they exceed a certain amount of traffic transferred. The necessary info...
by engineertote
Sun May 13, 2012 12:39 pm
Forum: Scripting
Topic: PPP Active connection + simple queue Script
Replies: 8
Views: 4753

PPP Active connection + simple queue Script

Hi All i'm trying to write script to add simple queue for each active user in PPP active with no success till now , the target is : i have 4 service levels each level have difrent up / down limit and the required sicript is to add new simple queue once the client be active on PPP active . Any help i...
by engineertote
Mon May 07, 2012 11:12 am
Forum: General
Topic: My Story with PCQ .. and high latency
Replies: 15
Views: 3790

Re: My Story with PCQ .. and high latency

i'm talking on different scenario , what i'm doing is limit the users into classes , "Economy class , Standard Class , business and super "each user will get the rate "Speed" of the specific class , and the Total Queue in tree is unlimited so the priority u talk about will not work . Regards You hav...
by engineertote
Fri May 04, 2012 3:36 am
Forum: General
Topic: My Story with PCQ .. and high latency
Replies: 15
Views: 3790

Re: My Story with PCQ .. and high latency

i'm testing on LAN network so nothing releated to the signal regarding to max speed per queue i didn't get you , can you pls more explain . It works for me. The only time I have a latency issue now is if I have poor signal somewhere. Have you adjusted the max speeds per queue to prevent the latency ...
by engineertote
Thu May 03, 2012 1:12 pm
Forum: General
Topic: My Story with PCQ .. and high latency
Replies: 15
Views: 3790

Re: My Story with PCQ .. and high latency

and still nothing :)
by engineertote
Wed May 02, 2012 4:03 pm
Forum: General
Topic: My Story with PCQ .. and high latency
Replies: 15
Views: 3790

Re: My Story with PCQ .. and high latency

nothing :)
by engineertote
Sun Apr 29, 2012 5:28 pm
Forum: General
Topic: My Story with PCQ .. and high latency
Replies: 15
Views: 3790

Re: My Story with PCQ .. and high latency

i have tried same QOS already , i even make firs 1 Mbyte go as free without limit but this is didn't fix the latency and poor performance problem.
by engineertote
Thu Apr 19, 2012 11:37 am
Forum: General
Topic: PCQ, high ping
Replies: 44
Views: 12517

Re: PCQ, high ping

Still waiting Solution ??!!!

Mikrotik Support !!!
Notice: For support from Mikrotik staff, write to support@mikrotik.com - Mikrotik does not generally offer support on the forum, this is a user forum

ok ,, Mikrotik users :) .. any one have same issue and found a solution ?
by engineertote
Thu Apr 19, 2012 1:40 am
Forum: General
Topic: PCQ, high ping
Replies: 44
Views: 12517

Re: PCQ, high ping

Still waiting Solution ??!!!

Mikrotik Support !!!
by engineertote
Thu Apr 19, 2012 1:38 am
Forum: General
Topic: My Story with PCQ .. and high latency
Replies: 15
Views: 3790

My Story with PCQ .. and high latency

Hi Friends i believe that most Mikrotik users depend on Megis QOS in Managing the networks QOS but for months of testing and using Megis policy "that i found it the best choice " the users faced haigh latency when they download files or browse normal web sites like youtube , facebook .. etc and this...
by engineertote
Fri Mar 30, 2012 12:40 am
Forum: Wireless Networking
Topic: sniffer problem
Replies: 6
Views: 2096

Re: sniffer problem

i have fixed this issue : 1- Filter on Bridge and PPPoe is L2 you can use Bridge Filter that its deal with L2 2- Unmark PAP authontication in your PPP server config as its send the password as text to the user and this is will be easy to attack 3- try to use manage switch and isolat between ur clien...
by engineertote
Thu Mar 29, 2012 8:08 pm
Forum: General
Topic: Block Mikrotik PPPoe client
Replies: 20
Views: 3078

Re: Block Mikrotik PPPoe client

i do appreciate your following up but i think you didn't get my point .. first they are not use PCC with only one PPPoe Client in On router they connect PPPoe client on each interface for ex. RB450 Have 4 ports , they use 3 interfaces as PPPoe client in each interface with different users and they d...
by engineertote
Wed Mar 28, 2012 2:14 pm
Forum: General
Topic: PCQ, high ping
Replies: 44
Views: 12517

Re: PCQ, high ping

u r right ,, i'm still facing same issue ..

i have spent weeks of reading and searching with no success till now

Mikrotik support pls do something
by engineertote
Wed Mar 28, 2012 12:31 pm
Forum: General
Topic: Block Mikrotik PPPoe client
Replies: 20
Views: 3078

Re: Block Mikrotik PPPoe client

i do understand that the clients can use another routers from another vendors but in my country the most routers used for this Load Balance is Mikrotik . Regarding to the BW limit , even the current users using PPPoe client with PCC can only get the limit i configured in my QOS , but my problem that...
by engineertote
Tue Mar 27, 2012 6:35 pm
Forum: General
Topic: Block Mikrotik PPPoe client
Replies: 20
Views: 3078

Re: Block Mikrotik PPPoe client

Can't this be done in Script ,, the idea is "" if pppoe client trying to connect with MAC address from 00:0c:42:xx:xx:xx then go to interface -- bridge -- filter and block the pppoe discover

but the problem that i'm not familiar with scripts :)
by engineertote
Tue Mar 27, 2012 2:50 pm
Forum: General
Topic: Block Mikrotik PPPoe client
Replies: 20
Views: 3078

Re: Block Mikrotik PPPoe client

I can block only one MAC address but i'm looking to block range of MAC address from 00:0c:42:00:00:00 to 00:0C:42:FF:FF:FF .. is this possible ??
by engineertote
Mon Mar 26, 2012 11:34 pm
Forum: General
Topic: Block Mikrotik PPPoe client
Replies: 20
Views: 3078

Re: Block Mikrotik PPPoe client

If you are simply determined to block mikrotik PPPoE, why don't you try blocking at the MAC-ADDRESS level? This is what i'm trying with no success ,, Mikrotik MAC address range is from 00:0C:42:00:00:00 TO 00:0C:42:FF:FF:FF I'm trying to use bridge filter to block the all MAC range with no success ...
by engineertote
Mon Mar 26, 2012 11:05 pm
Forum: General
Topic: Block Mikrotik PPPoe client
Replies: 20
Views: 3078

Re: Block Mikrotik PPPoe client

Thanks ,, regarding to the QOS i correctly configured the queues for users , and regarding to the Bandwidth yes its congested and that's why i'm trying to prevent users with continous load from using PPPoe client and multi PC on them DHCP . And why only mikrotik because the people in my country only...
by engineertote
Mon Mar 26, 2012 1:46 pm
Forum: General
Topic: Block Mikrotik PPPoe client
Replies: 20
Views: 3078

Re: Block Mikrotik PPPoe client

i already did ,, and its ok only one connection but my problem is the user connect with only one user through PPPoe client and configure his LAN as DHCP and connect multi PCs to his DHCP server and this is will do continous load on the user .. what i want to do is to : either disable users with cont...
by engineertote
Mon Mar 26, 2012 12:15 pm
Forum: RouterBOARD hardware
Topic: New Products at the MUM Poland
Replies: 43
Views: 17386

Re: New Products at the MUM Poland

If you watch the presentation, you will see that it will be ready to ship at the end of this summer (approximately). here is what you type in the presentation , nothing say about the availability of CCR :) CCR 1036 • 36 core networking CPU • 1.2GHz clock per core • Greater than 8 mpps standard forw...
by engineertote
Mon Mar 26, 2012 12:02 pm
Forum: RouterBOARD hardware
Topic: New Products at the MUM Poland
Replies: 43
Views: 17386

Re: New Products at the MUM Poland

i Like CCR 1036 ,, is it ready to ship ??
by engineertote
Sat Mar 24, 2012 12:14 pm
Forum: General
Topic: Block Mikrotik PPPoe client
Replies: 20
Views: 3078

Block Mikrotik PPPoe client

Hi i have PPPoe server providing home user services , the problem is that some people configure PPPoe client in Mikrotik and by using PCC load balance that can get more than one PPPoe client to be them WAN side and in the LAN side they configure PPPoe server and they are getting them full BW limit c...
by engineertote
Tue Feb 14, 2012 2:51 pm
Forum: General
Topic: Export compact (new in v5.12)
Replies: 76
Views: 35129

Re: Export compact (new in v5.12)

i saw in the web site that 5.12 been removed this mornning and back again just now ,, is there any modifications on the new package ??

with thanks
by engineertote
Sat Feb 11, 2012 1:52 pm
Forum: General
Topic: MTCTCE Sample Exam
Replies: 9
Views: 17941

Re: MTCTCE Sample Exam

Thanks man

it was 25 question in 60 min . mostly general question and case studies.

Congratulations! engineertote

How many test was in the exam? Was there any LAB on exam? What was the exam duration?
by engineertote
Fri Feb 10, 2012 8:36 pm
Forum: General
Topic: Stable package on X86
Replies: 8
Views: 1492

Re: Stable package on X86

5.8 is ok , but i see 5.7 is quit stable better than others specially with X86 ,

Mikrotik team ,, please we need stable version on X86 .. hope to see that in 5.13

thanks

5.8 is stable since weeks on my x86

br
by engineertote
Mon Feb 06, 2012 11:08 am
Forum: General
Topic: Stable package on X86
Replies: 8
Views: 1492

Re: Stable package on X86

overall non-stability , sometimes the server hang up until we reboot it .
PPP users can not logging on with heavy use while with 5.7 they are easily access with same load .


thanks
by engineertote
Wed Feb 01, 2012 2:53 pm
Forum: General
Topic: Stable package on X86
Replies: 8
Views: 1492

Stable package on X86

Hi

Mikrotik team please we need stable version with x86 because all packages starting from 5.7 is not stable with X86 ,


with thanks
by engineertote
Mon Jan 30, 2012 11:25 pm
Forum: General
Topic: MTCTCE Sample Exam
Replies: 9
Views: 17941

Re: MTCTCE Sample Exam

Would you like to share how it was # I mean was it just general questions regarding mikrotik networking, topics like chain,routing,firewall,queuing etc? the questions is mixed , general questions , Qeueue Tree BW distribution , DHCP cases , firewall questions ..etc. # at which location you gave the ...
by engineertote
Mon Jan 30, 2012 1:23 am
Forum: General
Topic: MTCTCE Sample Exam
Replies: 9
Views: 17941

Re: MTCTCE Sample Exam

Thanks ,, i meant by sample exame is to have an idea about the questions .. Any way i have succesfully passed the exam today and got the certificate :D Thanks There is no example exam. The purpose of the exam is to test your knowledge, not to test if you can pass the exam by knowing what questions w...
by engineertote
Sat Jan 28, 2012 7:19 pm
Forum: General
Topic: MTCTCE Sample Exam
Replies: 9
Views: 17941

Re: MTCTCE Sample Exam

Tomorrow is my exam .. till now i can not find any sample exam !!! :( :(

any help is highly appreciated


with thanks
by engineertote
Fri Jan 27, 2012 8:52 pm
Forum: General
Topic: MTCTCE Sample Exam
Replies: 9
Views: 17941

MTCTCE Sample Exam

Hi to all

Any one know link for sampl exam MTCTCE , as i have an exam and want to test my information before do the exam .


Regards
by engineertote
Mon Jan 09, 2012 1:41 pm
Forum: General
Topic: PPP over EOIP or VLAN through WAN network
Replies: 2
Views: 756

Re: PPP over EOIP or VLAN through WAN network

78 view , no reply .
by engineertote
Mon Jan 02, 2012 10:19 am
Forum: General
Topic: PPP over EOIP or VLAN through WAN network
Replies: 2
Views: 756

Re: PPP over EOIP or VLAN through WAN network

wow ,, very nice !! 30 view and 0 post :(
by engineertote
Tue Dec 27, 2011 7:08 pm
Forum: General
Topic: PPP over EOIP or VLAN through WAN network
Replies: 2
Views: 756

PPP over EOIP or VLAN through WAN network

Hi to all i have two sides , Side A is my Server and Side B is my clients . Side A and B are connected via DWDM Fibre Network and its under same VLAN configured by the DWDM network , the Fibre network depend Cisco 2560 switch and its not support QinQ . My goal is to let the clients at side B to have...
by engineertote
Tue Dec 27, 2011 1:49 pm
Forum: General
Topic: EOIP with PPP
Replies: 3
Views: 469

Re: EOIP with PPP

is there Any other way do same tunneling to send the PPP over it ?


If you are marking and queuing encapsulated traffic then yes, it will be one PCQ since source and destination is tunnel end addresses.
by engineertote
Tue Dec 27, 2011 1:14 pm
Forum: General
Topic: EOIP with PPP
Replies: 3
Views: 469

Re: EOIP with PPP

18 view with no posts !!!!!
by engineertote
Mon Dec 26, 2011 8:20 pm
Forum: General
Topic: EOIP with PPP
Replies: 3
Views: 469

EOIP with PPP

Hi to All i'm using PPP server over EOIP interface with Megis QOS . There is small issue that all users under same EOIP interface be shared in the PCQ limit that its should go for each user in the normal case when we use normal PPP over Ethernet , here is my config <code> /interface eoip add arp=ena...
by engineertote
Sun Dec 25, 2011 11:13 pm
Forum: General
Topic: v5.11 released
Replies: 173
Views: 44278

Re: v5.11 released

i have upgrade my X86 from 5.7 to 5.11 but the problem that its keep hang up and stop running untill i reboot it , i have downgrade it to 5.7 and its back stable ,, please be noted to fix it in 5.12


Thanks
by engineertote
Wed Dec 21, 2011 10:27 am
Forum: Scripting
Topic: Script to Hide MT interface MAC address
Replies: 3
Views: 1804

Re: Script to Hide MT interface MAC address

Thanks

Read this excellent presentation done by Wardner Maia

Layer 2 Security - Attacks and Countermeasures using MikroTik RouterOS
http://mum.mikrotik.com/presentations/PL10/maia.pdf

I think that you can grab some ideas from there.
by engineertote
Sun Dec 18, 2011 11:11 am
Forum: Scripting
Topic: Script to Hide MT interface MAC address
Replies: 3
Views: 1804

Script to Hide MT interface MAC address

Hi

i need a script to hide the MAC address of interface on the local side so the client will not see what is the MAC address of my Mikrotik as some attackers using sniper programs to know the MT Mac address and do virtual server on them PCs to attack the users .

Regards
Ahmed
by engineertote
Tue Nov 01, 2011 1:35 pm
Forum: General
Topic: Virtual Mikrotik with Cain&Abel simpl PPPOE attack
Replies: 7
Views: 898

Re: Virtual Mikrotik with Cain&Abel simpl PPPOE attack

Thanks for all ,, Problem fixed


regards
by engineertote
Mon Oct 31, 2011 10:31 pm
Forum: General
Topic: Virtual Mikrotik with Cain&Abel simpl PPPOE attack
Replies: 7
Views: 898

Re: Virtual Mikrotik with Cain&Abel simpl PPPOE attack

Fewi My network is : Mikrotik router ---- Cisco Switch --- Clients "My clients is not end users "only P2P links to resellers , from my side i do isolate them in my main switch so the users in port1 not see the users in port 2 also using EOIP tunnel for each P2P client with seperate PPP server for ea...
by engineertote
Mon Oct 31, 2011 7:04 pm
Forum: General
Topic: Virtual Mikrotik with Cain&Abel simpl PPPOE attack
Replies: 7
Views: 898

Re: Virtual Mikrotik with Cain&Abel simpl PPPOE attack

Thanks for your reply , is EOIP solve this issue ?
by engineertote
Mon Oct 31, 2011 4:22 pm
Forum: General
Topic: Virtual Mikrotik with Cain&Abel simpl PPPOE attack
Replies: 7
Views: 898

Virtual Mikrotik with Cain&Abel simpl PPPOE attack

Dears i have problem with my PPP server , its easily attacked by using Sniffer program Like Cain&Abel and copy of mikrotik OS installed on Virtual machine on the attacker PC and they can see the username / password of the online users and then simply use it . i have upgrade the router to 5.7 and ena...
by engineertote
Sun Oct 30, 2011 3:27 pm
Forum: Beginner Basics
Topic: How TO prevent Snifir programs
Replies: 8
Views: 2001

Re: How TO prevent Snifir programs

but in my router i have enable the encryption and its still same ,,, the guys using cain&Abel can see my users and do them attack easily :(
by engineertote
Sun Oct 30, 2011 2:14 pm
Forum: Wireless Networking
Topic: sniffer problem
Replies: 6
Views: 2096

Re: sniffer problem

PPPoe encryption will fix the problem

Mustafa if you are " per user reseller " in IRAQ you can contact me and i'll be ready to help here is my no. 07902272267


Regards
by engineertote
Sun Oct 30, 2011 1:33 pm
Forum: General
Topic: RouterOS v5.7 released
Replies: 227
Views: 66988

Re: RouterOS v5.7 released

I love how MikroTik are improving on features like the Sniffer. The new filters are awesome.


Cheers.

can you tell me how u do sniffer filter pls ,, as i facing issue that my PPP server its been attacked by cain program that its using MAC sniffer.


Regards
by engineertote
Sat Oct 29, 2011 12:34 am
Forum: Forwarding Protocols
Topic: BGP implementation and IP Advertising
Replies: 2
Views: 795

Re: BGP implementation and IP Advertising

Thanks ,, i have DONE
by engineertote
Tue Oct 18, 2011 10:20 pm
Forum: General
Topic: how block connection of p2p?
Replies: 291
Views: 153049

Re: how block connection of p2p?

I'm fighting with this bit torrent for the past week but this bad torrent is win :( i have follow all ways to limit it with no success , , i just tried add action=drop chain=forward connection-limit=16,32 disabled=no dst-port=!53 protocol=udp and did small test with bit torrent and its getting much ...
by engineertote
Sun Oct 09, 2011 2:56 pm
Forum: Forwarding Protocols
Topic: BGP implementation and IP Advertising
Replies: 2
Views: 795

BGP implementation and IP Advertising

Hi dears

We have managing wireless and fibre network based on Mikrotik routers , we have registered our IPs and AS and need to implement BGP on our core router and advertise the prefix , i have static route between my network and my provider , any idea how to start ?


Regards
by engineertote
Sat Sep 10, 2011 2:35 am
Forum: General
Topic: PCQ, high ping
Replies: 44
Views: 12517

Re: PCQ, high ping

hel , i have faced same issue with my routers , buts its goes bit better with 5.6 SW , try to upgrade and see Regards You need something called Low Latency Queuing. That is not yet implemented in Mikrotik. I need that too. That make sense. I've now searched "Low Latency Queuing" on this forum and it...
by engineertote
Sat May 14, 2011 12:25 pm
Forum: General
Topic: Load Balance"use upload from ISP and download from other ISP
Replies: 11
Views: 6263

Load Balance"use upload from ISP and download from other ISP

Hi to all

i have two ISPs and need to use the uplink from ISP1 and downlink from ISP2 , i have search in wike but didn't found anything helpful.

i do appreciate if any one past me any weki example or advice how to do the above config.


Regards
by engineertote
Mon Apr 18, 2011 2:01 pm
Forum: Scripting
Topic: Limit different traffic in day and night using Queue Tree
Replies: 14
Views: 4084

Re: Limit different traffic in day and night using Queue Tre

Great ,,, its perfectly work now ..

Thank you million time for your kind help .


Regards
by engineertote
Mon Apr 18, 2011 10:03 am
Forum: Scripting
Topic: Limit different traffic in day and night using Queue Tree
Replies: 14
Views: 4084

Re: Limit different traffic in day and night using Queue Tre

Thanks for your kind help ,, but still i can not success in this even after upgrade to 5.1 and put the script in two seperated lines , can you please do me favor and post the final working config for the script , scedular , clock and queue Tree .

i do appreciate your kind support .


Regards
by engineertote
Sun Apr 17, 2011 3:00 pm
Forum: Scripting
Topic: Limit different traffic in day and night using Queue Tree
Replies: 14
Views: 4084

Re: Limit different traffic in day and night using Queue Tre

Hi

its accept it


[ahmed@MikroTik] > /queue tree enable "day"
[ahmed@MikroTik] >

and i tried disable it and enable it trough /queue tree disable "day" and /queue tree enable "day" and both is working on queue disable and enabling.

Regards
Ahmed
by engineertote
Sun Apr 17, 2011 12:01 pm
Forum: Scripting
Topic: Limit different traffic in day and night using Queue Tree
Replies: 14
Views: 4084

Re: Limit different traffic in day and night using Queue Tre

ditonet , thanks for your effort but still the qeueue tree not take the changes ,, i see the run count in both script and scedular working fine but its not reflected to the qeueue tree .


Regards
Ahmed
by engineertote
Sun Apr 17, 2011 1:37 am
Forum: Scripting
Topic: Limit different traffic in day and night using Queue Tree
Replies: 14
Views: 4084

Re: Limit different traffic in day and night using Queue Tre

Now the script and the scedular working but its not disable or enable the Day / night queue Tree
by engineertote
Fri Apr 15, 2011 12:17 am
Forum: Scripting
Topic: Limit different traffic in day and night using Queue Tree
Replies: 14
Views: 4084

Re: Limit different traffic in day and night using Queue Tre

Still waiting any post helpout in this issue ...
by engineertote
Sun Apr 10, 2011 12:27 pm
Forum: General
Topic: RouterOS 5.1 is out!
Replies: 93
Views: 13397

Re: RouterOS 5.1 is out!

i have fool question :)

RB1100 i can not see it in the RB series selections in the download page ,, can i use same 1000 series ?
by engineertote
Sun Apr 10, 2011 12:23 pm
Forum: Scripting
Topic: Limit different traffic in day and night using Queue Tree
Replies: 14
Views: 4084

Re: Limit different traffic in day and night using Queue Tre

Hi

thanks for post , here is the results of clock


[ahmed@MikroTik] > /system clock print
time: 12:22:08
date: apr/10/2011
time-zone-name: manual
gmt-offset: +00:00
by engineertote
Sat Apr 09, 2011 11:38 am
Forum: General
Topic: High latency with RB1000 and 1100 but its fine with RB433
Replies: 0
Views: 300

High latency with RB1000 and 1100 but its fine with RB433

Dear All i have using some routers in my network each one managing some clients , some routers are RB433 and some 1000 and 1100 , with same configuration on all routers i see when the end user put download the ping to the Gateway and DNS been very high and sometimes disconnected in same time with sa...
by engineertote
Mon Mar 28, 2011 3:11 pm
Forum: Scripting
Topic: Limit different traffic in day and night using Queue Tree
Replies: 14
Views: 4084

Re: Limit different traffic in day and night using Queue Tre

its 10 days since i post my issue .. till now no answers ..

Answer me and get Karma :) ;)
by engineertote
Fri Mar 18, 2011 2:02 pm
Forum: Scripting
Topic: Limit different traffic in day and night using Queue Tree
Replies: 14
Views: 4084

Limit different traffic in day and night using Queue Tree

Hi i have tested limit dffrent traffic in day and night with simple Queue and its worked perfectly , now i'm using another way of BW management using Firewall--Mangle -- Mark Packets and using Queue tree to limits . the problem that with Queue tree the scadular not working , its show me that its act...
by engineertote
Mon Dec 20, 2010 11:09 am
Forum: RouterBOARD hardware
Topic: Power Router 732
Replies: 4
Views: 2658

Re: Power Router 732

Thanks Normise , is it give better performance than RB1000 with my case ?
by engineertote
Mon Dec 20, 2010 10:57 am
Forum: RouterBOARD hardware
Topic: Power Router 732
Replies: 4
Views: 2658

Power Router 732

Hi

i saw in Adv. there is company produce Power Router 732 based on Mikrotik , can you please advice if some one test it , i have network with 20 Mbps BW and using RB1000 , if this power router 732 can do better than RB1000 please advice .


Regards
by engineertote
Mon Aug 09, 2010 8:49 pm
Forum: General
Topic: Forwarding ICMP to WAN1 in PCC load Balance
Replies: 4
Views: 1834

Re: Forwarding ICMP to WAN1 in PCC load Balance

Many thanks .. its ok now
by engineertote
Mon Aug 09, 2010 11:56 am
Forum: General
Topic: Forwarding ICMP to WAN1 in PCC load Balance
Replies: 4
Views: 1834

Forwarding ICMP to WAN1 in PCC load Balance

Hi all i have two WAN with1 LAN using PCC load Balance with per connection calssication . The ping to DNS and to any other web site sometimes coming from WAN1 and sometimes comming from WAN2 .. same for normal internet traffic . i want to keep the claissification of internet traffic as it is .. but ...
by engineertote
Sun Jul 18, 2010 11:06 am
Forum: General
Topic: problem with PCC load balance
Replies: 4
Views: 1089

Re: problem with PCC load balance

Thanks for your feedback ,, here is my magle configuration can you please explain bit more if i need to add some more rules on it if i increase the pcc streams : / ip firewall mangle add chain=input in-interface=WAN1 action=mark-connection new-connection-mark=WAN1_conn add chain=input in-interface=W...
by engineertote
Sat Jul 17, 2010 5:16 pm
Forum: General
Topic: problem with PCC load balance
Replies: 4
Views: 1089

problem with PCC load balance

Hi to All i have two gateways first is Fiber and the other is VSAT .. i have using PCC load Balance with RB1000 v.4.5 and its working very fine , i only have two issues : 1- Currently the LAN bandwidth is devided on both gatways " WAN1 & wan2 " equally , for exampl if the traffic show 1 Mbps i see i...
by engineertote
Tue May 04, 2010 12:36 pm
Forum: General
Topic: New Mikrotik NAS cannot get authenticated
Replies: 4
Views: 1243

Re: New Mikrotik NAS cannot get authenticated

in Radius Manager under add new NAS section be sure that the IP you put your NAS " Mikrotik IP " and the secret is same of the defaulte secret " testing123 " in Mikrotik config: 1- Radius -- add new --- set the RM IP there and the same secret testing123 2- select what service you want like PPP , Hot...
by engineertote
Tue Apr 06, 2010 10:44 am
Forum: The User Manager
Topic: Prepaid start new timing after rstart the UM!!staff pls help
Replies: 5
Views: 1534

Re: Prepaid start new timing after rstart the UM!!staff pls

Hi ,, reload the test UM 4.6 from here http://forum.mikrotik.com/viewtopic.php?f=10&t=35718 , this is will solve the time increase problem after reboot but its will not disconnect the expired users until they log out by themselves then when they try to log in again the UM will not allow them . Regar...
by engineertote
Sun Mar 28, 2010 12:52 pm
Forum: General
Topic: BW managing for WISP
Replies: 20
Views: 3129

Re: BW managing for WISP

i think its will be very hard to do like this with large network as its will be not easy to monitor and checking , centralizing is the solution as you can be sure that your network protected and the BW shaping is in safe place .. also it will be easy to monitor and BW modifications Thanks For a inte...
by engineertote
Sat Mar 27, 2010 7:24 pm
Forum: General
Topic: BW managing for WISP
Replies: 20
Views: 3129

Re: BW managing for WISP

Thanks .. i have read many examples and guides and now i'm doing well with QOS and its really improved my internet service .. Many thanks for Mikrotik The best why to learn is to read, and explore the many facilities of RouterOS. But to get you on track, make "lab" testing area. take you router inns...
by engineertote
Sat Mar 27, 2010 6:56 pm
Forum: The User Manager
Topic: Prepaid start new timing after rstart the UM!!staff pls help
Replies: 5
Views: 1534

Re: Prepaid start new timing after rstart the UM!!staff pls

Hi dear Thanks for posting ,, i have contacted Mikrotik support and they informed that the issue with the old package of UM itself .. you can try it same procedure u post and see the time left for any user u add ,, then try to turn off and then turn on your Routerboard where the UM is installed u wi...
by engineertote
Fri Mar 26, 2010 2:25 am
Forum: The User Manager
Topic: Prepaid start new timing after rstart the UM!!staff pls help
Replies: 5
Views: 1534

Re: Prepaid start new timing after rstart the UM!!staff pls

Steaaange :roll: ,,, more than three days i post my problem and till now no answer !!!! please any advice ? is this bug in UM or i have something wrong in configuration ? can i do this job with MT UM or i have to sue another Radius server ... pleeeeeeeeeeeease help as its very urgent and important ...
by engineertote
Tue Mar 23, 2010 7:04 pm
Forum: The User Manager
Topic: Prepaid start new timing after rstart the UM!!staff pls help
Replies: 5
Views: 1534

Prepaid start new timing after rstart the UM!!staff pls help

Hi all i have problem with the usermanager prepaid users , when i add new credit with specific period its working normally as it should be , but if i turn off and on my user manager Router Board , the prepaid users having anoother extra Time in the time left !! how is this ? i read all the wiki and ...
by engineertote
Tue Mar 23, 2010 2:19 pm
Forum: The User Manager
Topic: usermanager option user/left
Replies: 6
Views: 1444

Re: usermanager option user/left

Sergejes I have config same in the wiki page and it was working perfectly , i just have problem when i restart " Turn powerd off and on again " the RB device that its have UM installed .. the users who don't have valid credit able to loging again with extra period ? please help ASAP pant, have you l...
by engineertote
Tue Mar 23, 2010 10:59 am
Forum: The User Manager
Topic: generate user and password with 1 Month limit
Replies: 4
Views: 1135

Re: generate user and password with 1 Month limit

Now i have every thing working fine when i set limit time in the credit its working fine .. Any user expired can not log in again and this is good ,,, the bad point here is if the user manager powered off and on again .. the expired users can log in again and its show new time period for them . plea...
by engineertote
Tue Mar 23, 2010 9:47 am
Forum: The User Manager
Topic: generate user and password with 1 Month limit
Replies: 4
Views: 1135

Re: generate user and password with 1 Month limit

hi

its 4.6 with license L6 .



Regards
by engineertote
Mon Mar 22, 2010 6:43 pm
Forum: The User Manager
Topic: generate user and password with 1 Month limit
Replies: 4
Views: 1135

Re: generate user and password with 1 Month limit

i have tried these points : 1- add user with up time xx for exampl 10 mins " 00:10:00 " when i access with this user after 10 mins its disconnected but if i logged out before the 10 mins up and logged in again its start again accounting for another 10 mins 2- add batch and limit the up time like abo...
by engineertote
Mon Mar 22, 2010 11:54 am
Forum: The User Manager
Topic: generate user and password with 1 Month limit
Replies: 4
Views: 1135

generate user and password with 1 Month limit

Hi all i have RB1000 with L6 lic. , i'm using PPPOE with usermanager for controling my customers . when i add new users via usermanager its working very fine but if i add uptime its not working and failed to logging on .. the question is how can i generate username and passwords with time limit 1 Mo...
by engineertote
Mon Mar 15, 2010 3:00 pm
Forum: Beginner Basics
Topic: how do i set diffrent BW for users between day and night
Replies: 3
Views: 549

Re: how do i set diffrent BW for users between day and night

can u post it as terminal comands so we can try them .. thanks One simple option: PPPoE and Hotspot both use simple queues to limit users. Simple queues are overridden by queue trees attached to global-in and global-out. Between 11pm and midnight and midnight and 8am mark all packets as 'unlimited' ...
by engineertote
Sun Mar 14, 2010 10:19 am
Forum: Beginner Basics
Topic: how do i set diffrent BW for users between day and night
Replies: 3
Views: 549

Re: how do i set diffrent BW for users between day and night

whats up ??!!! 21 views till now with no at leats one post :? !!!!!!!!!!
by engineertote
Sat Mar 13, 2010 12:55 pm
Forum: Beginner Basics
Topic: how do i set diffrent BW for users between day and night
Replies: 3
Views: 549

how do i set diffrent BW for users between day and night

Hi all i have two networks with to RBs first is RB1000 and the other is RB800 , with the RB1000 i have set Hot spot and the RB800 pppoe . i need to give customers in both networks free download with out any limit out of the rush hours .. for example : from 08:00 am to 11:00 pm they will have limited...
by engineertote
Tue Mar 09, 2010 1:26 pm
Forum: Wireless Networking
Topic: 6.5 Km point to point link
Replies: 30
Views: 3761

Re: 6.5 Km point to point link

Hi all I would like to thanks Mikrotik for this forum and thanks all person who tried to help in posts and replays , finally i got the problem and now the link working very fine with good sgnial , the problem was with the R52H that i was use it i just replaced it and now every thng normally . Thanks...
by engineertote
Mon Mar 08, 2010 5:30 pm
Forum: Wireless Networking
Topic: 6.5 Km point to point link
Replies: 30
Views: 3761

Re: 6.5 Km point to point link

Hi is the big diffrence between the two signals means hardware issue at one of the sides ? As i told you before, you have a hardware problem. And your signals are not the same...so you have a problem with 1 side of the link. Check antennas, Cables and cards (change them! ). Nothing wrong with elevat...
by engineertote
Sat Mar 06, 2010 3:36 pm
Forum: Wireless Networking
Topic: 6.5 Km point to point link
Replies: 30
Views: 3761

Re: 6.5 Km point to point link

with 900 meter ,, the AP was on hieght 15 Meter from the ground and the Client on 10 Meter from the ground now for 6.5 Km the AP on 21 Meter and the clinte on 20 Meter is there something i have to do with the elevation ? as my direction is 100% right if u r getting -67/80 at 900 mtr on such antenna ...
by engineertote
Sat Mar 06, 2010 10:09 am
Forum: Wireless Networking
Topic: 6.5 Km point to point link
Replies: 30
Views: 3761

Re: 6.5 Km point to point link

Signal Streanght was -67/-80 with 900 meter
what signal are you getting at 900m?
by engineertote
Wed Mar 03, 2010 4:36 pm
Forum: Wireless Networking
Topic: 6.5 Km point to point link
Replies: 30
Views: 3761

Re: 6.5 Km point to point link

hi .. i have sent u both IPs for remote access on bt.ang@mykris.net and cc to vincent_angbt@hotmail.com i do appreciate your kind support If you able to let us remote login, it will help you very fast. Thanks ,, can i send u the access details via email as the forum is public . Thanks as you plan
by engineertote
Wed Mar 03, 2010 1:17 pm
Forum: Wireless Networking
Topic: 6.5 Km point to point link
Replies: 30
Views: 3761

Re: 6.5 Km point to point link

If you able to let us remote login, it will help you very fast.

Thanks ,, can i send u the access details via email as the forum is public .


Thanks
by engineertote
Wed Mar 03, 2010 9:50 am
Forum: Wireless Networking
Topic: 6.5 Km point to point link
Replies: 30
Views: 3761

Re: 6.5 Km point to point link

its only 30 cm .

what is the length of the pigtail cable from the radio to the antenna?
by engineertote
Tue Mar 02, 2010 6:55 pm
Forum: Wireless Networking
Topic: 6.5 Km point to point link
Replies: 30
Views: 3761

Re: 6.5 Km point to point link

its same ,, i have test it with shorter link only 900 Meter .. same configuration and it was working fine . i just make the flatpanel hiegher at the AP and install the other side then i didn't able to lock the p2p link IF WDS bridge is enabled check for wds mode and the frequency channel u hav selec...
by engineertote
Tue Mar 02, 2010 6:02 pm
Forum: Wireless Networking
Topic: 6.5 Km point to point link
Replies: 30
Views: 3761

Re: 6.5 Km point to point link

Thanks ,, yes the WDS-BRIDGE is enabled at both ends .

Have u enable WDS/Bridge in ur AP. Perhaps ur client end has WDS enabled but AP end is not. If LOS is clear there should not be any issue.
by engineertote
Tue Mar 02, 2010 6:01 pm
Forum: Wireless Networking
Topic: 6.5 Km point to point link
Replies: 30
Views: 3761

Re: 6.5 Km point to point link

brb .. i think its clear .. the wds-station keep searching but its not find the ap-bridge from the other end to be connected .

"but the problem that i can not have lock" WHAT?? Be more specific!
by engineertote
Tue Mar 02, 2010 3:25 pm
Forum: Wireless Networking
Topic: 6.5 Km point to point link
Replies: 30
Views: 3761

6.5 Km point to point link

Hi all I need to establesh point to point wireless link with 6.5 Km in Baghdad/IRAQ , in both ends i have RB433 , R52H and Mikrotik Flat panel 20 db , my configuration is transparent bridged like this exampl in wiki : http://wiki.mikrotik.com/wiki/Transparently_Bridge_two_Networks i have two towers ...
by engineertote
Mon Feb 15, 2010 2:42 pm
Forum: General
Topic: problem with upgrade RB800 OS from 4.2 to 4.5
Replies: 7
Views: 1167

Re: problem with upgrade RB800 OS from 4.2 to 4.5

Thanks ,, i did and its succefully upgraded .




if that a Folder I see?

RouterOS doesn't support folders

upload all NPK files to the root level of the file tree.
by engineertote
Sun Feb 07, 2010 1:01 pm
Forum: General
Topic: problem with upgrade RB800 OS from 4.2 to 4.5
Replies: 7
Views: 1167

Re: problem with upgrade RB800 OS from 4.2 to 4.5

Hi i did through system--reboot ,, i also after that when its not upgraded turn it power off and on and both are same .. but the package i download it is " All packages " not the combined packages .. is this affect ? Regards Did you reboot with 'system reboot' or just remove power and power back up?...
by engineertote
Sun Feb 07, 2010 11:51 am
Forum: General
Topic: problem with upgrade RB800 OS from 4.2 to 4.5
Replies: 7
Views: 1167

problem with upgrade RB800 OS from 4.2 to 4.5

Hi all i have RB800 need to upgrade it from OS4.2 to 4.5 .. i have downloaded the new packages from Mikrotik web site and past it in the file list via winbox and then reboot the RB800 ,, the new packages now uploaded to the file list but the OS still show 4.2 , bellow the results : [admin@MikroTik] ...
by engineertote
Mon Feb 01, 2010 9:51 am
Forum: RouterBOARD hardware
Topic: problem with Boot on RB433 AND RB600
Replies: 1
Views: 772

problem with Boot on RB433 AND RB600

Hi i have two RB first is 433 and the other is 600 .both have the following problems : 1- RB433 , i have upgrade OS from 3.25 to 4.5 , after reboot the board its never back up and i have the following results in hypertermnal : RouterBOOT booter 2.23 RouterBoard 433 CPU frequency: 300 MHz Memory size...
by engineertote
Mon Feb 01, 2010 9:45 am
Forum: RouterBOARD hardware
Topic: Routerboard will not load
Replies: 4
Views: 2263

Re:

Hi ,, how to reload ,, i faced a problem that its not find the kernal and not start the service .. i have format the nand and now its show the folloing : RouterBOOT booter 2.23 RouterBoard 433 CPU frequency: 300 MHz Memory size: 64 MB Press any key within 2 seconds to enter setup.. kernel not found ...
by engineertote
Sat Jan 30, 2010 10:02 am
Forum: General
Topic: BW managing for WISP
Replies: 20
Views: 3129

Re: BW managing for WISP

Can any one please post the config here so it will help me and help others have same issue ..

i need to know how physically it will be .. shall i need to assign IP address from the rb433 or how ?


any post is welcom
by engineertote
Wed Jan 27, 2010 6:19 pm
Forum: Beginner Basics
Topic: Two RB1000 work as ACtive / fail over
Replies: 2
Views: 471

Two RB1000 work as ACtive / fail over

Hi

Can i use two RB1000 work as Active/Failover , so if the main RB1000 face any problem or get faulty .. all the information will be move the the back up one ..

Any advice is highly appreciated

Regards
by engineertote
Wed Jan 27, 2010 2:30 pm
Forum: General
Topic: how do i set diffrent BW for users between day and night
Replies: 1
Views: 332

how do i set diffrent BW for users between day and night

Hi i need to set diffrent BW for users if i use Hot Spot or PPPoe , for exampl from 08:00 am untill 11:00 pm i have heavy traffic on my network so each user will have 42 kbps upload and 104 kbps download , but after 11:00 pm and untill next mornning i don't have heavy traffic so i want the users to ...
by engineertote
Mon Jan 25, 2010 10:30 pm
Forum: General
Topic: Pre paid cards
Replies: 2
Views: 527

Re: Pre paid cards

Hi Thanks ,, can you please send me in details how i can configure the usermanager as i'm not have good experiance in it Hi For starter you can use the usermanager package for your router. But if you like more advanced options you need an external radius server and a software for admin of it. I'm us...
by engineertote
Sun Jan 24, 2010 2:09 pm
Forum: General
Topic: Pre paid cards
Replies: 2
Views: 527

Pre paid cards

Hi How can i provide prepaid cards for my customers , i'm using RB1000 with v4 OS . i need to provide for exampl 100 hrs pre paid card with 512 kbps/128 kbps and some other limites and rates . also if i need to make time limit for exampl the 100 HRS have limit 1 or 2 months and after this the card w...
by engineertote
Sun Jan 24, 2010 2:06 pm
Forum: General
Topic: BW managing for WISP
Replies: 20
Views: 3129

BW managing for WISP

Hi ,, we have wireless network providing point to point internet service , our main controller is RB1000 with v4 OS . for the point to point links i'm using RB433 as transparent bridge in both sides how i can limit the BW for my customers , i.e. one of my customers need 1 Mbps downlink / 256 Uplink ...
by engineertote
Mon Oct 26, 2009 4:17 pm
Forum: General
Topic: VOIP Billing
Replies: 4
Views: 525

VOIP Billing

Hi ,,

We normally in hotspot setting give username and password for the generate new users and make billing ..

We need to generate username and passwords for VOIP service .. and make it work as VOIP billing systems . is that possibule with mikrotik ?


Thanks
by engineertote
Mon Oct 26, 2009 11:35 am
Forum: General
Topic: Vedios Cached in my web proxy ONLY youtube not !!??
Replies: 7
Views: 5160

Re: Vedios Cached in my web proxy ONLY youtube not !!??

is there any other way to cache youtube or metacafe ?
some of these video servers are designed differently
by engineertote
Mon Oct 26, 2009 11:15 am
Forum: General
Topic: Vedios Cached in my web proxy ONLY youtube not !!??
Replies: 7
Views: 5160

Re: Vedios Cached in my web proxy ONLY youtube not !!??

Thanks for quiq replay ,, but why other vedios cached very well ? is it only youtube and metacafe can't cached ? why ?


Thanks
you can't cache youtube.
by engineertote
Mon Oct 26, 2009 11:10 am
Forum: General
Topic: Vedios Cached in my web proxy ONLY youtube not !!??
Replies: 7
Views: 5160

Vedios Cached in my web proxy ONLY youtube not !!??

Hi all I have set and configured web proxy in my Mikrotik and its doing great ,, browsing , downloads and Videos are saved in the server and its all cached .. I have only one problem ,, vedios in youtube and metacafe not caching .. i'v tried another videos in another web sites and all working very w...
by engineertote
Sat Oct 24, 2009 4:17 pm
Forum: General
Topic: problem with ddr1 RAm and installed mikrotik 2.9.?
Replies: 4
Views: 5042

Re: problem with ddr1 RAm and installed mikrotik 2.9.?

hehe ,, whats up man .. you write all of this :) .

:lol:
by engineertote
Tue Aug 04, 2009 1:26 pm
Forum: General
Topic: web browser cache in RB433
Replies: 1
Views: 356

web browser cache in RB433

Dear All ,, I have RB433AH connected to my wan side " VSAT " and the Line side is 30 PC .. i want to enable the web brwosing chach in the mikrotik so if one of the users request for www.yahoo.com it will be saved in the cach and when the other PC requested same page he will get it very fast because ...
by engineertote
Sun May 24, 2009 12:46 pm
Forum: Wireless Networking
Topic: Transparently Bridge two Networks
Replies: 5
Views: 1261

Re: Transparently Bridge two Networks

Hi ,, First upgrade your OS ,, Second follow the commands " use the consol commands " in both ended and you will get it work , the exampl will work 100% i have tried it here and its working fine . Regards I have te same problem cant get a connection how do you solve the problem regards michael
by engineertote
Sun May 24, 2009 12:22 pm
Forum: Wireless Networking
Topic: Maximam Distance for Point to Point transperent Bridge
Replies: 4
Views: 686

Re: Maximam Distance for Point to Point transperent Bridge

My dear .. The Distance is 22 Km and i have 45 Mb full duplex , what i need to know is : 1- is the needs only 2 RB433AH , Antenna 20 dbi and R52H on the two nodes only or i need to put more repeaters in the line of sight ? 2- is using one RB433AH enough to carry 45 Mb full duplex or i have to share ...
by engineertote
Fri May 22, 2009 1:21 pm
Forum: Wireless Networking
Topic: Maximam Distance for Point to Point transperent Bridge
Replies: 4
Views: 686

Maximam Distance for Point to Point transperent Bridge

Dears .. I have the following hardware : 2 RB433AH , 2 R52H and 2 antenna 20 dbi . i have configure it as point to point transperent bridge .. can i know whats the maximam distance i can do it with this point to point link to geive best performance , lowest latency and maximam bandwidth transfer . y...
by engineertote
Wed May 20, 2009 10:56 am
Forum: Wireless Networking
Topic: can i do 45 Mb full duplex on point to point
Replies: 8
Views: 1594

Re: can i do 45 Mb full duplex on point to point

Stefan ,, Thanks for your kind advice boss .. i just have small issue ,, when i make it on turbo mode i lost the connection and i was not able to reconnect again untill i back it to the 5 Ghz with freq. 5805 , is there any specific changes i have to do it when i change to turbo mode ?? Stefan ,, the...
by engineertote
Wed May 20, 2009 9:53 am
Forum: Wireless Networking
Topic: Need to carry 45 Mb full duplex on point to point link
Replies: 3
Views: 791

Re: Need to carry 45 Mb full duplex on point to point link

Thanks ,, Can you please advice how to do this configuration ? Have you turnetd nstreme and framing on? Can you use turbo channel? For latency problem, do the shaping, better with external device. Lets say your links max is 20 Mbit/s If you do bw test's you will see something like this 1 mbps - 1 ms...
by engineertote
Wed May 20, 2009 9:40 am
Forum: Wireless Networking
Topic: can i do 45 Mb full duplex on point to point
Replies: 8
Views: 1594

Re: can i do 45 Mb full duplex on point to point

Stefan ,, the max speed i get is 20 Mbit .. how can i reach the 65 Mbit ? is there any specific configuration . My current coniguration is like this example : http://wiki.mikrotik.com/wiki/Transparently_Bridge_two_Networks Thanks You never see more than ~65MBit Aggregated using one Card/Antenna per ...
by engineertote
Tue May 19, 2009 5:10 pm
Forum: Wireless Networking
Topic: can i do 45 Mb full duplex on point to point
Replies: 8
Views: 1594

can i do 45 Mb full duplex on point to point

Dear All ,, I need to transfer 45 Mb full duplex on point to point link using RB433AH for distance 20 Km .. I have 2 RB433AH , 2 R52H and 2 flat penal antenna " 20 dbi and/or 29 dbi " i made a test for shorter distance and lower bandwidth transfer .. its made 20 Mb file transfer speed and the point ...
by engineertote
Tue May 19, 2009 5:01 pm
Forum: Wireless Networking
Topic: Need to carry 45 Mb full duplex on point to point link
Replies: 3
Views: 791

Need to carry 45 Mb full duplex on point to point link

Dear All ,, I need to carry 45 Mb full duplex on point to point link with distance 20 Km using Transperent bridge with 2 RB433AH , 2 R52H and 2 flat penals " i have 20 dbi and 29 dpi " .. i configure the point to point link with transperent bridge " bridge to wds-station " and its work normally in s...