Community discussions

Search found 137 matches

by jcem
Fri Feb 12, 2016 10:54 pm
Forum: General
Topic: Very specific v6.34rc20 - will not upgrade a bunch of my RB4xx units - about 30+/-
Replies: 8
Views: 1418

Re: Very specific v6.34rc20 - will not upgrade a bunch of my RB4xx units - about 30+/-

Hi Normis!

The main problem with upgrading
from RC20 is the kernel failure. It does
not matter if you upload the combined
upgrade package as you still get kernel
error on reboot if the wireless interface
is included in a bridge.

Rgds
by jcem
Fri Feb 12, 2016 8:44 pm
Forum: General
Topic: Very specific v6.34rc20 - will not upgrade a bunch of my RB4xx units - about 30+/-
Replies: 8
Views: 1418

Re: Very specific v6.34rc20 - will not upgrade a bunch of my RB4xx units - about 30+/-

Hi! Had the same problem. Disable and/or remove wireless Interface from bridge. Then upgrade.

Rgds
Jörgen
by jcem
Fri Mar 20, 2015 12:46 pm
Forum: Announcements
Topic: v6.28 final RC testing
Replies: 92
Views: 31747

Re: v6.28 final RC testing

Hi!

Error when opening inbox "Couldn't start - profile already running (6)"

When opening inbox with ROS6.28RC15 CRS125 with profile running
from previous session

RGDS
Jörgen
by jcem
Sat Jan 31, 2015 12:17 pm
Forum: General
Topic: CCR 1016 12s - SFP link lights
Replies: 4
Views: 1126

Re: CCR 1016 12s - SFP link lights

Hi!

I had the same thing with a default config.

Turns out the default
system/leds
are wrong. Just correct it in Winbox or Terminal and
everything should be fine.....

RGDS
by jcem
Wed Oct 22, 2014 1:26 am
Forum: General
Topic: Something freezes mikrotik in v6 & frequent watchdog-reboot
Replies: 14
Views: 4479

Re: Something freezes mikrotik in v6 & frequent watchdog-reb

Hi!

2 things to check

1. Have you the default CPU Frequency? Increasing the CPU Frequency from default can cause this problem....

2. I've seen some APC UPS connected to USB cause the same problem...

RGDS
Jorgen
by jcem
Thu Sep 18, 2014 11:58 pm
Forum: General
Topic: Water in the METAL 2SHPN
Replies: 10
Views: 2129

Re: Water in the METAL 2SHPN

HI!

It's a chance you water leak in the cable at some higher elevated point
then the Groove. If water enter the cable it follow the cable and row out
inside the Groove....

RGDS
Jörgen
by jcem
Fri Aug 15, 2014 9:12 am
Forum: Wireless Networking
Topic: Wireless not compatable with WX670/WX680 payment terminals
Replies: 4
Views: 846

Re: Wireless not compatable with WX670/WX680 payment termina

Hi again!

Forgot to say that ARP ping prom interface works from RB device to WX670/680 terminal.
Disconnect the terminal an ARP ping stops
by jcem
Fri Aug 15, 2014 9:09 am
Forum: Wireless Networking
Topic: Wireless not compatable with WX670/WX680 payment terminals
Replies: 4
Views: 846

Re: Wireless not compatable with WX670/WX680 payment termina

Random thought. Do you have the Mikrotik set to support B/G? Many old terminals do not support N.
Yes, set to B/G. What i didn't try was older MT cards without N
by jcem
Fri Aug 15, 2014 12:58 am
Forum: Wireless Networking
Topic: Wireless not compatable with WX670/WX680 payment terminals
Replies: 4
Views: 846

Wireless not compatable with WX670/WX680 payment terminals

Hi! I set up a RB951G-2HnD at restaurant to serve 2 WX680 payment terminals. The Terminals connect fine with WPAPSK/EAS, but they don,t pass any traffic. I con not even ping from AP to terminal or vice versa. Even tried a Groove52 After lots of fibbing around, (even without security which also didn'...
by jcem
Mon Aug 04, 2014 5:10 pm
Forum: General
Topic: Urgent advice needed!
Replies: 5
Views: 1270

Re: Urgent advice needed!

Hi!

Do you have anything connected on the USB port? I'd problem with some simple UPS
connected to the USB that caused kernel failure avery few minutes.

RGDS
by jcem
Tue Jul 01, 2014 12:25 am
Forum: General
Topic: v6.15 released
Replies: 302
Views: 103922

Re: v6.15 released

Hi!
I'm now testing 6.16rc10 if they fixed it.

6.16rc10 seam to have a new SNMP bug thou...
RGDS
Please tell us more abut SNMP bug that is introduced in v6.16rc10

Hi!

Seams to be working after 24hr -- CPU, Voltage etc did not get any data to DUDE - Maybe DUDE needed some time??

RGDS
by jcem
Sat Jun 28, 2014 3:06 am
Forum: General
Topic: v6.15 released
Replies: 302
Views: 103922

Re: v6.15 released

Hi!

Confirmed bug by MT in wireless-fp package if you have any legacy wireless card(non N-wireless capability)
installed on the RB

I'm now testing 6.16rc10 if they fixed it.

6.16rc10 seam to have a new SNMP bug thou...

RGDS
by jcem
Sun Mar 23, 2014 10:41 pm
Forum: General
Topic: v6.11 released
Replies: 260
Views: 80521

Re: v6.11 released

Hi!

If you have high or 100% CPU, try closing some or all windows inside Winbox

or start a fresh session(don't Load previous session)

Works for me. Maybe some old info is stored in the "Previous Session profile....

RGDS
Jörgen
by jcem
Sun Mar 23, 2014 9:38 pm
Forum: General
Topic: Why CRS125-24G-1S in Winbox Meue
Replies: 2
Views: 752

Re: Why CRS125-24G-1S in Winbox Meue

Hi! This is because you have different packages installed On RB2011 you have a separate NTP package installed that override the SNTP package included in the default package. You can install the default package and as packages as you like OR install all separate packages Hope it helps... RGDS Jörgen
by jcem
Fri Jan 17, 2014 12:21 am
Forum: Beginner Basics
Topic: Why is my CRS125-24G-1S-RM acting like a hub?
Replies: 8
Views: 2655

Re: Why is my CRS125-24G-1S-RM acting like a hub?

Hi! I've seen the same thing I think it has something to do with the the bug they are talking about in this update - line#7 RGDS What's new in 6.8rc1 *) dhcp client - support interfaces in bridge; *) dhcp - parse decimal strings and IP addreses in options value; *) bgp - don't show community 'intern...
by jcem
Wed Dec 04, 2013 2:11 pm
Forum: General
Topic: RouterOS v6 release candidate 1
Replies: 96
Views: 30188

Re: RouterOS v6 release candidate 1

Is usb sharing working? I'm sorry to say that final version of RouterOS v6 will not include this feature, as the drivers we tried to use, did not meet our quality standards, and it is a bit too late to write our own implementation from scratch. Hi! Any chance this feature will be available? RGDS Jö...
by jcem
Sat Nov 09, 2013 9:39 pm
Forum: General
Topic: RouterOS v6.6 released
Replies: 164
Views: 73000

Re: RouterOS v6.6 released

BUG REPORT Ros 6.6 Routerboard: 3.10 Platerforme: RB1100AH2 Something has changed about Vlan because when I upgrade from 6.5 to 6.6, I loose Vlan to ethernet. but I found a workaround to stay in 6.6 previous config in 6.5, I have a bridge, vlan30 created on the bridge, ethernet7 in the bridge, so v...
by jcem
Mon Aug 19, 2013 12:09 pm
Forum: General
Topic: 3G is not working anymore
Replies: 3
Views: 597

Re: 3G is not working anymore

Hi!

At some point MT inverted the data and info channels - I think from 5.25 to 6.0

I had this problem and if I before hade "1" as DataChannel I now have to use "0" and the
same for Infochannel

RGDS
by jcem
Sun Aug 18, 2013 12:26 pm
Forum: SwOS
Topic: RB260GS VLANs
Replies: 9
Views: 12976

Re: RB260GS VLANs

Hi!

Have you tried to set each interface to "optional" under the VLAN tab?

RGDS
by jcem
Thu Jul 25, 2013 6:17 pm
Forum: General
Topic: load userman backup problem
Replies: 5
Views: 1042

Re: load userman backup problem

Login to Userman after you restoredthe database to the new router

then as I described earlier.....

RGDS
by jcem
Wed Jul 24, 2013 10:34 pm
Forum: General
Topic: load userman backup problem
Replies: 5
Views: 1042

Re: load userman backup problem

Hi!

Have you tried to remove the active sessions(xx A Sessions) in USERMAN?
Mark the sessions and "Close" under "Edit" menu

RGDS
Jörgen
by jcem
Tue Jul 23, 2013 2:45 pm
Forum: General
Topic: routeros 6.2 changelog
Replies: 61
Views: 16567

Re: routeros 6.2 changelog

Release 22jul13 Still no PayPal function. RB doesn't accept "return" from Paypal after payment. Works fine in ROS5.25 RGDS have you contacted support with supout.rif file and remote access? we can't repeat it, we must see your system Many times Ticket#2013071766000184, Ticket#2013062266000354
by jcem
Tue Jul 23, 2013 12:23 pm
Forum: General
Topic: routeros 6.2 changelog
Replies: 61
Views: 16567

Re: routeros 6.2 changelog

Release 22jul13

Still no PayPal function. RB doesn't accept "return" from Paypal after payment.

Works fine in ROS5.25

RGDS
by jcem
Thu Jun 06, 2013 1:02 am
Forum: General
Topic: v6.0 released
Replies: 321
Views: 68796

Re: v6.0 released

Hi paka! I had some problems too. Check active certificate under ip/services so that the correct certificate is choosen. Also check if you can rebuild the database in winbox/terminal - tool user database rebuild without errors I had one database getting corrupted when upgradeing to ROS6 and the cert...
by jcem
Mon May 27, 2013 12:08 pm
Forum: General
Topic: What G3/4 usb modem will fit OmniTik?
Replies: 5
Views: 1016

Re: What G3/4 usb modem will fit OmniTik?

I would be more concerned about which modem to use rather the size.

Some modems fit inside the box together with the RB itself if you use an USB extention and make a small hole, but I think it's
better just to use a outside small box with an USB extention cable.

RGDS
by jcem
Tue Feb 19, 2013 6:40 pm
Forum: General
Topic: 493G Interfaces disappear on V5.22 and 5.23
Replies: 8
Views: 1712

Re: 493G Interfaces disappear on V5.22 and 5.23

Hi!

Check CPU speed

I have hade the same problem before on other RB's when not running default
CPU speed

RGSD
by jcem
Fri Feb 08, 2013 6:29 pm
Forum: General
Topic: v6.0rc9 released
Replies: 59
Views: 17034

Re: v6.0rc9 released

"/ip dns set cache-size=2048"

works fine in RC9

RGDS
by jcem
Wed Feb 06, 2013 1:54 am
Forum: General
Topic: Mikrotik 6rc8 hangs when listing interfaces
Replies: 7
Views: 1636

Re: Mikrotik 6rc8 hangs when listing interfaces

I've seen this an all 6RC releases and reported it to MT for every release

It's not on every RB with wireless - some work.

I can't see what is the factor that make it work on some and some not

I'll post some more info supout to MT tomorrow

RGDS
by jcem
Mon Feb 04, 2013 9:42 pm
Forum: General
Topic: RC8 - OpenFlow
Replies: 3
Views: 1132

Re: RC8 - OpenFlow

by jcem
Mon Feb 04, 2013 7:41 pm
Forum: General
Topic: v6 rc8 released
Replies: 26
Views: 6303

Re: v6 rc8 released

"Interface window" in winbox stops sending data. When making
a new connection the windows is empty.

Also no SNMP - CPU, DISK

RB433AH ROS6.0RC8 4feb13

This was not the case with the friday 1feb13 release where SNMP shot to 100%

Jörgen
by jcem
Sun Feb 03, 2013 7:05 pm
Forum: Wireless Networking
Topic: 433AH dead after firmware upgrade from 2.20 to 3.02
Replies: 5
Views: 1357

Re: 433AH dead after firmware upgrade from 2.20 to 3.02

I had the same problem some time ago.

I found out that first upgrading to fw 2.41 (ROS5.19) and then to 3.02(ROS5.22+)
works without any problems.

I have writtten about it before and notified MT, but I guess they
havn't taken it seriously.

RGDS
by jcem
Sat Feb 02, 2013 11:26 pm
Forum: Wireless Networking
Topic: wireless network for 3g
Replies: 1
Views: 653

Re: wireless network for 3g

Hi!

I would sugest an RB that supports "USB power-reset"

http://wiki.mikrotik.com/wiki/Manual:USB_Features

That way the modem will reboot when RB reboots or if you want to script the modem to reboot
for some reason.

RGDS
by jcem
Wed Jan 16, 2013 12:39 am
Forum: Wireless Networking
Topic: Water Damaged SXT's
Replies: 4
Views: 1067

Re: Water Damaged SXT's

I have not seen this problem. We started to try to not use Silicon, and have quited totaly. I think i have about 150 SXT, and have had 0 error (not been DOA) This is in hard Norwegian weather, With a lot of rain and snow, and temp Down to -30C Hi! I've actually had one out on Koster that didn't lik...
by jcem
Wed Jan 02, 2013 7:44 pm
Forum: The Dude
Topic: The Dude is NOT Dead - New Dude Version...
Replies: 101
Views: 39386

Re: The Dude is NOT Dead - New Dude Version...

Mikrotik is looking for C /C++ programers

http://translate.google.com/translate?s ... hp&act=url
by jcem
Sun Dec 30, 2012 7:29 pm
Forum: Wireless Networking
Topic: RB750UP and RB600?
Replies: 5
Views: 872

Re: RB750UP and RB600?

Hi! I might work, but your cable is long and you have 2 hightpower cards total of 11W ≈ 0,5A on 24V The powerjack accepts accepts 10-56V If you use an POE-extractor and plug into the powerjack https://www.wintherwireless.se/poekit-v2-1xinjector--1xextractor-w-dcconnector-for-ipcam-p-807-c-224.aspx I...
by jcem
Sat Dec 29, 2012 11:13 pm
Forum: General
Topic: RB493G fail after firmware upgrade
Replies: 7
Views: 1841

Re: RB493G fail after firmware upgrade

According to RB493G manual

S3 - Software Reset 1 button. Loads the Primary boot loader

Will load the backup firmware and continue from there.....
by jcem
Sat Dec 29, 2012 9:24 pm
Forum: General
Topic: RB493G fail after firmware upgrade
Replies: 7
Views: 1841

Re: RB493G fail after firmware upgrade

Hi!

I've seen this kind of problem before when skipping
firmware versions.

My experience is that upgrading to firware version2.39
allways works. I belive 2.39 was last in 5.19

RGDS
by jcem
Sat Dec 15, 2012 3:03 am
Forum: General
Topic: ROS6.0rc6 problem
Replies: 5
Views: 1761

ROS6.0rc6 problem

Hi! tried many 6.0RC's so far and sent many reports to support. Have seen good progress in ROS6, but today I had big problems. SXT runs 100% wireless and no respons in winbox - had to downgrade to ROS5.22 RB433AH runs 100% and no respons also had to downgrade to ROS5.22, the problem here that ethern...
by jcem
Thu Dec 06, 2012 6:45 pm
Forum: General
Topic: v6 rc5 released
Replies: 112
Views: 35330

Re: v6 rc5 released

wispwest! what was your previous version before upgrade? I had simular problem when upgrading from pre ROS5.20 run command /system check-installation and see if you get any file errors - i did and had to do netinstall could be that you had errors before upgrade, therefore your backup is corrupted. C...
by jcem
Sat Nov 24, 2012 10:46 pm
Forum: General
Topic: 5.22 released!
Replies: 104
Views: 48078

Re: 5.22 released!

50 units upgraded without any problem
RB411, RB411AR, RB411AH, RB433, RB433AH, RB435, RB800, RB711, RB2011, SEXANT, SXT

All units had 5.19- 5.21 with firmware upgraded before upgrade.
Rebooted units that had uptime more then 20 days before upgrade

RGDS

Jorgen
by jcem
Tue Oct 16, 2012 11:22 pm
Forum: Beginner Basics
Topic: 5.21 Comments
Replies: 10
Views: 2453

Re: 5.21 Comments

Same occured to me when I upgraded RB433AH 4.17 to ROS 5.20 a
few weeks ago.

Same error messages as last post.

Jörgen
by jcem
Mon Oct 15, 2012 10:36 pm
Forum: General
Topic: Bridge 3g usb modem PPP connection
Replies: 4
Views: 3556

Re: Bridge 3g usb modem PPP connection - Solved

Thank for your answer!

I solved it with help from http://wiki.mikrotik.com/wiki/Manual:Si ... ic_Routing

RGDS
by jcem
Thu Oct 11, 2012 8:48 pm
Forum: General
Topic: Bridge 3g usb modem PPP connection
Replies: 4
Views: 3556

Bridge 3g usb modem PPP connection

Hi! Anyone know if it's possible to bridge the PPP 3G connection with the Ethernet interface. This way the RB411U would act as a bridge and an other RB1200 router would get the public ip. I tried to add the bridge in "PPP/Profiles", but it doesn't work. This way the 411U would be just as bridge a re...
by jcem
Wed Sep 19, 2012 11:29 pm
Forum: The User Manager
Topic: Authenticated even with timed out payment
Replies: 14
Views: 3741

Re: Authenticated even with timed out payment

Hi Normis! Should't this be fixed in ver5 as well before development of v5 stops? After all you call it vX stable on the download page and people that don't wish to wait upgrade to v6 or don't want to pay for v6 if they have for example have an older RB433AH 512mb or bought a licence for their PC. A...
by jcem
Fri Sep 14, 2012 5:49 pm
Forum: General
Topic: Hotel in New Orleans for MUM
Replies: 0
Views: 304

Hotel in New Orleans for MUM

Hi!

Somebody got any good deals with any other hotel then the Hilton Hampton Hotel?

I made a late decision to go to the MUM and now the Hilton Hampton is sold out

Thanks in advance

Jörgen
by jcem
Tue Aug 28, 2012 7:54 pm
Forum: RouterBOARD hardware
Topic: Spectrum Noise on RB751U-2HnD
Replies: 36
Views: 5918

Re: Spectrum Noise on RB751U-2HnD

I'm also seeing it...

RGDS
Jörgen
by jcem
Fri Aug 24, 2012 1:34 am
Forum: General
Topic: Low noice floor on RB411Ar builtin radiocard
Replies: 3
Views: 793

Re: Low noice floor on RB411Ar builtin radiocard

Hi! Thanks for reply. I read the doumentation and it stats as you say that the RB411AR is -69 dBm @ 54 Mbps compared to -81 dBm @ 54 Mbps(for r52nM) But I can not find anywhere that it says that it doesn't have 'standard' filter MT need to make RB411AR better. They are make building hotspots easy wi...
by jcem
Thu Aug 23, 2012 7:21 pm
Forum: General
Topic: Low noice floor on RB411Ar builtin radiocard
Replies: 3
Views: 793

Low noice floor on RB411Ar builtin radiocard

I've problem with the RB411AR and the builtin 2GHz radiocard. The noicefloor is 10-15dBm lower then using an r52nM card on the same routerboard, configuration and antenna. I have tried 4 different RB411AR with the same result. The older RB411Ar with ufl connector is much better. There it is only a 5...
by jcem
Sun Aug 19, 2012 3:32 pm
Forum: General
Topic: v5.20 released
Replies: 113
Views: 38429

Re: v5.20 released

Prices are in South African Rand $1 = ZAR8.33

:lol:
by jcem
Sun Aug 05, 2012 1:21 pm
Forum: The User Manager
Topic: Logo
Replies: 20
Views: 13102

Re: Logo

Why don't you try as I said?
I have a folder called "umfiles". There I save the "logo.gif"

in userman under settings, logo enter "/umfiles/logo.gif"
The login page is looking for "logo.gif"

RGDS
Jörgen
by jcem
Sat Aug 04, 2012 11:49 pm
Forum: The User Manager
Topic: Logo
Replies: 20
Views: 13102

Re: Logo

Hi!

I have a folder called "umfiles". There I save the "logo.gif"

in userman under settings, logo enter "/umfiles/logo.gif"

RGDS
Jörgen
by jcem
Thu Aug 02, 2012 12:16 am
Forum: The User Manager
Topic: Logo
Replies: 20
Views: 13102

Re: Logo

Hi!

I have a folder within the "hotspot" folder called "images". There I save the "logo.jpg"

On the loginpage I call the image with "<p align="center"><img src="images/logo.jpg" width="270"></p>"

This works without any problems

RGDS
Jörgen
by jcem
Thu Jul 12, 2012 11:19 am
Forum: Beginner Basics
Topic: just need to get password back
Replies: 5
Views: 989

Re: just need to get password back

If you saved it with password in winbox on an other computer
you can find the password in clear text in the file "winbox.cfg"

It is usally located in C:\Documents and Settings\User\Application Data\Mikrotik\Winbox directory

RGDS
by jcem
Sat Jun 30, 2012 1:44 pm
Forum: Beginner Basics
Topic: Installing User Manager in the RB411AR router [solved]
Replies: 4
Views: 1368

Re: Installing User Manager in the RB411AR router

Userman runs on 411AR, but I would not recommend anything less then 680MHz and license level 5. The database also needs increasing memory. See License limitations http://wiki.mikrotik.com/wiki/Manual:License_levels#License_Levels I was asking for a different Don. The Don I know works for Compaq/HP, ...
by jcem
Sat Jun 30, 2012 1:29 am
Forum: Beginner Basics
Topic: Installing User Manager in the RB411AR router [solved]
Replies: 4
Views: 1368

Re: Installing User Manager in the RB411AR router

Make shure it's the same version of the UM packaage as the version
the 411AR is running. It should all be in the log...

Don James - Houston, TX?


RGDS
by jcem
Tue Jun 19, 2012 8:29 pm
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 55187

Re: RB750UP - Issue

And these devices are within 500mA required (for current FW) at voltage they are receiving?
According to Ubiquity 12-24V 2.5W

2.5W at 24V ≈100mA

Their own powersupply is on 24V/0.5A
by jcem
Tue Jun 19, 2012 1:24 pm
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 55187

Re: RB750UP - Issue

Yesterday I tried to power UBNT Airvision with 750UP ROS 5.17 and the Camera reset to factory defaults. I tried 2 different cameras with the same result. Had to go back and use the factory POE adapters I wonder if the camera have some kind of undocumented poweshoot reset function that gets triggered...
by jcem
Wed Jun 06, 2012 5:24 pm
Forum: The Dude
Topic: SNMP problem with 5.17 - Dude 3.6
Replies: 4
Views: 2102

Re: SNMP problem with 5.17 - Dude 3.6

I have the same problem with 5.17 on some devices.

Mainly older RB411AR with ufl connectors

I rolled back to 5.11 and then it works fine

RGDS
by jcem
Sat Jun 02, 2012 8:44 pm
Forum: The User Manager
Topic: 80 GB hdd full
Replies: 6
Views: 2559

Re: 80 GB hdd full

All my UM reports 100%

I don't now why, but it doesn't seam to mean anything

I just don't care...

Look under maintenance in UM. There it reports free space..

RGDS
by jcem
Sat Jun 02, 2012 8:40 pm
Forum: General
Topic: user manager not login
Replies: 3
Views: 554

Re: user manager not login

It doesn't help to uninstall UM - the database is still there.

The password to login in UM is set under "Customer"

To remove/clear the database and passord type this in terminal...

/tool user-manager database clear

Hope it helps!
RGDS
Jörgen
by jcem
Fri May 11, 2012 6:39 pm
Forum: The User Manager
Topic: Create Users via API
Replies: 3
Views: 5834

Re: Create Users via API

I use the following:

"/tool user-manager user add customer=admin disabled=no name=xxx password=yyy shared-users=3 phone=12345; /tool user-manager user create-and-activate-profil customer=admin profile=DailyPlan user=xxx"

I hope it helps

RGDS
Jörgen
by jcem
Sat Apr 21, 2012 11:59 am
Forum: General
Topic: v5.15 released!
Replies: 150
Views: 29699

Re: v5.15 released!

Winbox closes when I click Quickset - RB411U
by jcem
Sat Feb 25, 2012 8:04 pm
Forum: General
Topic: Evry Day Kernel Failure?
Replies: 6
Views: 864

Re: Evry Day Kernel Failure?

Hi!

Do you use bridge?

If so activate rstp on each bridge....

RGDS
by jcem
Mon Feb 20, 2012 11:47 am
Forum: General
Topic: v5.13 released
Replies: 64
Views: 8358

Re: v5.13 released

Backup function don't work if "System Identity" contains special character "/"
I can see why, but just as info
by jcem
Sat Feb 18, 2012 1:18 am
Forum: Beginner Basics
Topic: Userman API with php
Replies: 0
Views: 518

Userman API with php

Hi! I made an userman frontend with MT API and php - it creates random login/password - the login can be changed and then it checks the userman database if login name is free any comments/suggestions are welcome.... http://hem.greby.com/Voucher/voucher.php I'll leave it up for the weekend Have a nic...
by jcem
Thu Feb 02, 2012 1:44 pm
Forum: Wireless Networking
Topic: Is it okey LOS?
Replies: 4
Views: 634

Re: Is it okey LOS?

SXT should be fine - then you can run 2 chains

Jörgen
by jcem
Wed Feb 01, 2012 10:26 pm
Forum: Wireless Networking
Topic: Is it okey LOS?
Replies: 4
Views: 634

Re: Is it okey LOS?

Precis vad jag tänkte säga. Lövträd med blad när det regnar suger signal

Men jag tror inte du kommer ha några problem här med 15Mb

Lycka Till!

Jörgen
by jcem
Wed Jan 25, 2012 12:07 am
Forum: General
Topic: v5.12 released
Replies: 144
Views: 25495

Re: v5.12 released

You used two commandline. First creating an user then assign to profile. But I need to do at once like v4.17 /tool user-manager user add name=xxx username=xxx password=xxx subscriber=admin add-credit=1day ... something like this Because I am using php api and users creats own username using a html ...
by jcem
Tue Jan 24, 2012 5:14 pm
Forum: General
Topic: v5.12 released
Replies: 144
Views: 25495

Re: v5.12 released

This works for me.... /tool user-manager user add customer=admin disabled=no name=XYZ password=ZYX shared-users=3 phone=###-####; /tool user-manager user create-and-activate-profil customer=admin profile=DailyPlan user=XYZ RGDS You used two commandline. First creating an user then assign to profile...
by jcem
Tue Jan 24, 2012 1:20 am
Forum: General
Topic: v5.12 released
Replies: 144
Views: 25495

Re: v5.12 released

This works for me....
/tool user-manager user add customer=admin disabled=no name=XYZ password=ZYX shared-users=3 phone=###-####; /tool user-manager user create-and-activate-profil customer=admin profile=DailyPlan user=XYZ

RGDS
by jcem
Sun Jan 22, 2012 7:55 pm
Forum: Scripting
Topic: What's wrong with this script!
Replies: 5
Views: 2513

Re: What's wrong with this script!

What does
:put ([/ip neighbor get X value-name=board] = "")
give you?

X= the number of the neighbour

true or false?
by jcem
Sun Jan 22, 2012 6:01 pm
Forum: General
Topic: v5.12 released
Replies: 144
Views: 25495

Re: v5.12 released

Uldis! If the user manager is on a different "store", in my case "micro-sd1/", it saves the backup in "micro-sd1/user-manager2" by default I even tried /tool user-manager database save name=micro-sd1/userman_backup.umb ,but recieve "No such file or directory" error When I try to access it it is not ...
by jcem
Sat Jan 21, 2012 11:15 pm
Forum: Scripting
Topic: What's wrong with this script!
Replies: 5
Views: 2513

Re: What's wrong with this script!

This works... :local int; :local machack; :foreach int in=[/ip neighbor find] do={ :if ( [/ip neighbor get $int value-name=identity] = "Mikrotik" ) do={ :log info "Hacker!"; :local machack [/ip neighbor get $int value-name=mac-address]; /interface wireless access-list add mac-address=$machack; } els...
by jcem
Thu Jan 12, 2012 7:28 pm
Forum: RouterBOARD hardware
Topic: Water Sxt
Replies: 74
Views: 12446

Re: Water Sxt

you probably didn't mount them according to the documentation. if you do that, it works without problems even after a year of rainy and wet weather (like we have here) There is a big difference of the rain in Riga and the "Spray" of salt we get here. I live 3km from the Swedish westcost and the air...
by jcem
Sun Jan 08, 2012 9:24 pm
Forum: Wireless Networking
Topic: how to ping a wireless client device ?
Replies: 6
Views: 1766

Re: how to ping a wireless client device ?

Hi!

To my knowledge UBNT don't answer to MAC Ping

Why don't you ping the IP of the UBNT instead.....

RGDS
by jcem
Wed Dec 14, 2011 11:58 am
Forum: General
Topic: v5.11 released
Replies: 173
Views: 44861

Re: v5.11 released

nothing was changed in this area, so I can't see why X86 would reboot on v5.11 and not on v5.8
Hi Normis!

I have a simular issue - see Ticket#2011113066000083

RGDS
Jörgen
by jcem
Wed Dec 14, 2011 3:04 am
Forum: The User Manager
Topic: ROS/UM v5.9 - Self Signup URL?
Replies: 3
Views: 1797

Re: ROS/UM v5.9 - Self Signup URL?

I read in the documentation thread about how the UM product has been abandoned (sad, really, it has so much potential to be such a great platform component along side RouterOS). Thus, I can understand the complete absence of documentation for the v5 version of UM - as frustrating as that might be. ...
by jcem
Tue Dec 13, 2011 5:27 pm
Forum: General
Topic: v5.11 released
Replies: 173
Views: 44861

Re: v5.11 released

Hello, Did you wait long enough? It takes a while for the database to convert/rebuilt. In the meantime the cpu load will be high. Yes, i thought it so. Have been waiting for more than half an hour but still no different. Before upgrading - make sure there are no special characters("-+%€öäå" etc) in...
by jcem
Tue Dec 13, 2011 4:06 pm
Forum: General
Topic: v5.11 released
Replies: 173
Views: 44861

Re: v5.11 released

I did an upgrade from 4.13 to 5.11, and manually installed the user-manager, reboot, then CPU load is 100% and user-manager not working. I see in the profiler, user-manger taking more than 90% cpu usage. So I've disabled it, and now all wireless/hotspot client can't connect. :( Any suggestions? Did...
by jcem
Sat Dec 03, 2011 1:25 am
Forum: General
Topic: bootloader fwf rb133
Replies: 3
Views: 709

Re: bootloader fwf rb133

I have a "adm5120-2.18.fwf" file....

RGDS
Jörgen
by jcem
Wed Nov 30, 2011 3:00 am
Forum: General
Topic: RouterOS v5.9 released
Replies: 166
Views: 42364

Re: RouterOS v5.9 released

When RB reaches high load (100%) for a a while it reboots. I had to downgrade to 5.8 again. I even had to disable some of the wireless cards to be able to upload the 5.8 version so it wouldn´t reboot while uploading. I could not rebuild the Userman database without the RB rebooted itself SUPOUT sent...
by jcem
Tue Nov 22, 2011 9:10 pm
Forum: RouterBOARD hardware
Topic: Problems with new revision of RB711-5Hn
Replies: 63
Views: 19910

Re: Problems with new revision of RB711-5Hn

what did you do to it, to break it off? Some encluseres like the Mikrobox, Poynting etc pull on the connector when closing the lid. Therefore it would be nice to have the old shielded connector that has better support to the board. The plastic connector doesn't look good in the Mikrotik CA enclosures
by jcem
Wed Nov 09, 2011 1:47 am
Forum: The User Manager
Topic: can't log into Usermanager
Replies: 24
Views: 20578

Re: can't log into Usermanager

I see in your original post that you have 2 "owners". 5.8 only accepts 1 owner. Try to remove owner "1" before update
by jcem
Wed Nov 09, 2011 1:33 am
Forum: The User Manager
Topic: can't log into Usermanager
Replies: 24
Views: 20578

Re: can't log into Usermanager

try to setup userman from scratch with a different admin/pass under "customers" and then import the database under maintanance
- use a backup of the allready converted DB in 5.8

I'm not sure what will hapen, but maybe it's possible
by jcem
Wed Nov 09, 2011 1:18 am
Forum: The User Manager
Topic: can't log into Usermanager
Replies: 24
Views: 20578

Re: can't log into Usermanager

shure you use the admin login "http://xxx.xxx.xxx.xxx/userman" and not client login "http://xxx.xxx.xxx.xxx/user"
by jcem
Mon Nov 07, 2011 12:24 am
Forum: The User Manager
Topic: can't log into Usermanager
Replies: 24
Views: 20578

Re: can't log into Usermanager

Also make sure you don't use any special characters in username and password before upgrading. This goes also for profiles.

Sometimes the profiles dissapear when upgrading. Any custom made login pages has to have their linkes changed
by jcem
Sun Nov 06, 2011 11:39 pm
Forum: The User Manager
Topic: can't log into Usermanager
Replies: 24
Views: 20578

Re: can't log into Usermanager

Did you try to change the password in terminal? What about rebuid the database from terminal and try again?

RGDS
by jcem
Thu Oct 27, 2011 6:39 pm
Forum: The User Manager
Topic: Mikrotik Hotspot in a Box with thermal printing and SMS
Replies: 25
Views: 14294

Re: Mikrotik Hotspot in a Box with thermal printing and SMS

Hi!

Any progress. Have you released any version yet?

RDGS
Jörgen
by jcem
Sun Sep 25, 2011 8:02 am
Forum: RouterBOARD hardware
Topic: RB411U & ZTE WF-112
Replies: 6
Views: 1848

Re: RB411U & ZTE WF-112

Had an simular issue with ZTE MF820D 4G modem. I contacted support and got the following answer from Sergejs...


"Next version will have 3G support for the particular modem. We are working on 4G
support, it will need some time to get 4G working."

RGDS
by jcem
Wed Sep 21, 2011 11:19 pm
Forum: Beginner Basics
Topic: R52Hn on one antenna
Replies: 5
Views: 1438

Re: R52Hn on one antenna

I've at least 50 without any problems

RGDS
by jcem
Mon Aug 29, 2011 10:33 pm
Forum: General
Topic: Router needs rebooting every few days
Replies: 3
Views: 762

Re: Router needs rebooting every few days

For the wlan interface
if you added dynamic/static and added a bridge under the WDS tab the wds in the wireless settings
for the corresponding link, it will be added to the bridge

If this is not your scenario then you have to look for an other solusion to your problem

RGDS
by jcem
Mon Aug 29, 2011 6:22 pm
Forum: General
Topic: Router needs rebooting every few days
Replies: 3
Views: 762

Re: Router needs rebooting every few days

Are you using wds on your bridges?
if so activate rstp on every bridge that is using wds.

Chances are that you are getting wds loops and the unit is getting kernel panic due to this...

RGDS
by jcem
Thu Jul 14, 2011 9:02 pm
Forum: The User Manager
Topic: upgrading problem (urgent)
Replies: 1
Views: 553

Re: upgrading problem (urgent)

I have the same experience. It doesn't alsways work to upgrade from V4. Sometimes the information corrects itself after reboot The other option is to revert to V4 and load the backup database. There should be a file called "userman before migration.umb". I just relized one other thing. Special chara...
by jcem
Sat Apr 02, 2011 12:52 pm
Forum: The User Manager
Topic: ROS 5 Usermanager
Replies: 2
Views: 1552

ROS 5 Usermanager

Under profiles I can't set "Starts" to anything other then "Starts: Now"
- There is no box for selection of "Now, at first login, etc....."

- Maybe the same goes for "Owner" , but I'm not sure if it's suposed to
be selectable....

Or

I'm I missing something?

RGDS
by jcem
Mon Mar 28, 2011 1:36 pm
Forum: RouterBOARD hardware
Topic: New Products
Replies: 188
Views: 28945

Re: New Products

Same here - no problem!!

RB800 & RB/604 & 3R52nM & 3R52Hn

Crowded but it's been up running for 6months now.

Todays CPU 50°C and ambient air 5°C

RGDS
by jcem
Mon Mar 07, 2011 12:54 pm
Forum: General
Topic: v5rc11 is out!
Replies: 68
Views: 14287

Re: v5rc11 is out!

Image


Allocated red the parameter jumps 62-92
Where to dig???

What RB model? RB433 or RB433AH or something else?

rgds
by jcem
Tue Mar 01, 2011 2:01 pm
Forum: General
Topic: v5rc10 released
Replies: 77
Views: 9139

Re: v5rc10 released

I have been running with hw-retries=10. The AP is RC10 an works fine. It's only the WDS-slave that is not working in RC10. The station is a simple 411 with L4 working as a repeater. I like to have the Virtual AP (with dhcp on that interface) on top of the WDS-slave. Then I have a Virtual AP with DH...
by jcem
Tue Mar 01, 2011 11:45 am
Forum: General
Topic: v5rc10 released
Replies: 77
Views: 9139

Re: v5rc10 released

I have been running with hw-retries=10. The AP is RC10 an works fine. It's only the WDS-Slave that is not working in RC10. The station is a simple 411 with L4 working as a repeater. I like to have the Virtual AP (with dhcp on that interface) on top of the WDS-Slave. Then I have a Virtual AP with DHC...
by jcem
Tue Mar 01, 2011 9:44 am
Forum: General
Topic: v5rc10 released
Replies: 77
Views: 9139

Re: v5rc10 released

WDS-Slave is very unstable. Stops responding, suddenly very high
latency and traffic stops. Drop connection helps for a while.

Also virtual AP does not work on top of WDS-Slave

Had to downgrade to 4.16.

RGDS
by jcem
Sun Feb 27, 2011 4:28 am
Forum: Wireless Networking
Topic: Bad ptmp troughput with 802.11n MIMO
Replies: 8
Views: 1740

Re: Bad ptmp troughput with 802.11n MIMO

Are you running WDS? Mikrotik WDS with 11n is slow.
WDS only works good with nstreame or nv2 which can't be used toghther with UBNT.

I've also seen some performance problems in rc10 that wasn't in rc9
by jcem
Sun Feb 27, 2011 12:26 am
Forum: Wireless Networking
Topic: Bad ptmp troughput with 802.11n MIMO
Replies: 8
Views: 1740

Re: Bad ptmp troughput with 802.11n MIMO

You havn't applied "HT extention channel: above control" under HT.

Do this for both AP and client

RGDS
by jcem
Fri Jan 07, 2011 3:08 pm
Forum: RouterBOARD hardware
Topic: RouterBOARD SXT 5HnD
Replies: 191
Views: 60015

Re: RouterBOARD SXT 5HnD

Niiiiice!

When will they be available?

RGDS
by jcem
Sat Dec 11, 2010 1:02 am
Forum: RouterBOARD hardware
Topic: RB711-5Hn problem/reset
Replies: 3
Views: 7448

Re: RB711-5Hn problem/reset

Had the same problem

Install the 4.13 or 4.14 with netinstall...

RGDS
by jcem
Sat Dec 11, 2010 12:29 am
Forum: General
Topic: Release 4.14
Replies: 8
Views: 2181

Re: Release 4.14

Please note that the wireless-NV2-4.14 package is missing from the "all_packages" folders.

So you must install "routeros" combined package to get it before installing
additional packages or you could loose connection to your NV2 site.

RGDS
by jcem
Wed Nov 03, 2010 10:24 pm
Forum: General
Topic: RouterOS v4.13 Released
Replies: 86
Views: 13319

Re: RouterOS v4.13 Released

Can only say NV2 ROS 4.13 saved me today. Where regular settings (nstreme) disconnects due to poor signal (I think the antenna has blown out of alignment after a storm- going to check it tomorrow) NV2 keeps going without disconnects. I have 3 CPE's with 1, 2 and 7 km on connected to this AP now with...
by jcem
Fri Oct 29, 2010 9:02 pm
Forum: General
Topic: RouterOS v5 RC2
Replies: 91
Views: 15144

Re: RouterOS v5 RC2

BTW, noticed that as long as there wasn't much traffic going through the RB433AH's that were undergoing serial kernel failures with rc2 they would stay up long enough for me to upload rc1 and downgrade. So...if you are testing on a board that isn't in production (of course you are), you may not see...
by jcem
Wed Oct 27, 2010 7:59 pm
Forum: General
Topic: RouterOS v5 RC2
Replies: 91
Views: 15144

Re: RouterOS v5 RC2

- Showing 28V constantly on RB433AH - showed correct 13V in rc1 - Somehow draws a lot more power. The RB433AH reboots with "power outage" even if I disable two radio cards I know that I'm short on amperage to this site due to over 500m power-cord, but has never been un issue before... Had to rapidly...
by jcem
Thu Oct 21, 2010 11:19 pm
Forum: General
Topic: RB800 stock
Replies: 3
Views: 686

Re: RB800 stock

by jcem
Thu Oct 07, 2010 10:22 pm
Forum: General
Topic: Bad CPE bringing down entire network.
Replies: 5
Views: 1325

Re: Bad CPE bringing down entire network.

Some ideas.....

I had some similar problems with an early Beta5
http://forum.mikrotik.com/viewtopic.php ... 35#p220435

Make sure don't have any unwanted dhcp client settings

RGDS
by jcem
Mon Sep 27, 2010 1:41 pm
Forum: RouterBOARD hardware
Topic: RB133 Netinstall problem (trying bootp protocol... failed)
Replies: 8
Views: 5448

Re: RB133 Netinstall problem (trying bootp protocol... faile

you have to start transfer from hyperterminal (send file)
by jcem
Mon Sep 27, 2010 1:04 pm
Forum: RouterBOARD hardware
Topic: RB133 Netinstall problem (trying bootp protocol... failed)
Replies: 8
Views: 5448

Re: RB133 Netinstall problem (trying bootp protocol... faile

Update the firmware via Bootloader and Serial Cable

http://routerboard.com/files/rb-2.18/adm5120-2.18.fwf
restart

update the ROS via the Bootloader

RGDS
by jcem
Sun Aug 01, 2010 11:37 am
Forum: General
Topic: New wireless protocol: Nv2 in v5.0beta5
Replies: 217
Views: 78256

Re: New wireless protocol: Nv2 in v5.0beta5

?????????????

So how to avoid it?

How do I incorporate a nv2-link in my network
without it bringing it all down?

RGDS
:?
by jcem
Sat Jul 31, 2010 12:16 am
Forum: General
Topic: New wireless protocol: Nv2 in v5.0beta5
Replies: 217
Views: 78256

Re: New wireless protocol: Nv2 in v5.0beta5

I have a testlink in my office with v5.0beta5 RB411 with r2n RB433 with r52n with a 2Ghz link an nv2 my whole network goes down with tons of collisions. this is an edge link - nothing connected to the RB411 and ethernet only for access to the RB433 when I swiched to 802.11 the problem goes away what...
by jcem
Mon Jul 12, 2010 11:40 pm
Forum: Wireless Networking
Topic: Why does a 433AH suck on solar?
Replies: 10
Views: 1350

Re: Why does a 433AH suck on solar?

I got the smallest of these....

http://nordicpower.se/pdf/SDC-5205_5208_5212_5220.pdf

Not sure were you buy those in the States, but maybe RS?

You can buy them online at elfa.se(69-055-13) - economy shipping maybe ≈ $20

RDGS
by jcem
Mon Jul 12, 2010 10:45 pm
Forum: Wireless Networking
Topic: Why does a 433AH suck on solar?
Replies: 10
Views: 1350

Re: Why does a 433AH suck on solar?

you can buy a dc/dc converter for less than $20

RGDS
by jcem
Fri May 21, 2010 7:31 pm
Forum: Wireless Networking
Topic: Problem. Solving 30km 11N wireless link issues.
Replies: 7
Views: 2755

Re: Problem. Solving 30km 11N wireless link issues.

The pictures I posted are actually from two different AP's - when setting an -n you can "fool" the system by setting f.e. disable Rate 54 and f.e. HT MCS 0-6. It will then "jump" to HT-20,40 without having to be able to connect reliable to Rate 54. - you can play around with this after the link is u...
by jcem
Fri May 21, 2010 1:32 am
Forum: Wireless Networking
Topic: Problem. Solving 30km 11N wireless link issues.
Replies: 7
Views: 2755

Re: Problem. Solving 30km 11N wireless link issues.

I've done the following with both a and n links.... For a- link I disable lower Rates - That way the link wont change from Rates 6,9,18.... and only changes between 18 and 36 the CCQ goes 2-3 times For n-link I disable higher HT MCS t and lower HT MCS - you have to test what works for your link unti...
by jcem
Sat May 15, 2010 9:28 pm
Forum: Wireless Networking
Topic: Mac OS X 10.6.3 and R2N 802.11n
Replies: 24
Views: 4044

Re: Mac OS X 10.6.3 and R2N 802.11n

Same here until I changed to 5Ghz

Transfer is also 2-3 times faster

RGDS
by jcem
Sat May 08, 2010 7:13 pm
Forum: Beginner Basics
Topic: Redirect Trafic for conference Urgent!!!
Replies: 2
Views: 763

Re: Redirect Trafic for conference Urgent!!!

Here is one way..... copy the 3 lines change the destination to the webserver you want and paste(right click) into terminal /ip firewall nat add action=dst-nat chain=dstnat comment="" disabled=no dst-port=80 protocol=\ tcp src-address=192.168.2.4-192.168.2.7 to-addresses=xxx.xxx.xxx.xxx if you just ...
by jcem
Fri May 07, 2010 1:10 pm
Forum: Wireless Networking
Topic: RB800 installation power requirement?
Replies: 4
Views: 1030

Re: RB800 installation power requirement?

How does this interference show? Where do you see that you have interference? I have one RB600 installation with 4 r52n cards and I haven't noticed any interference. As to my question about the RB800 installation I've been running it in my office with TCP Bandwithtest and 100%CPU on two cards and it...
by jcem
Tue May 04, 2010 1:51 pm
Forum: Wireless Networking
Topic: RB800 installation power requirement?
Replies: 4
Views: 1030

RB800 installation power requirement?

Hi! I'm considering the following installation RB800 10W - only in bridge mode RB604 4 r52Hn avg 5W = 20W - They will run at 22dBm 1 r52n 2,4W Total of ≈ 33W at 46V Is this reasonable with 40meter POE CAT6 cable? I know it's on the edge, but whats your opinion? According to what I've read CAT6 can c...
by jcem
Thu Apr 29, 2010 8:06 pm
Forum: General
Topic: Re: RouterOS v4.8 released
Replies: 37
Views: 6588

Re: RouterOS v4.8 released

I have done two upgrades to 4.8 on RB433AH on both the ether port indicated inactive and had to be cycled disabled/enabled before it came on line - this happens after every reboot I'm lucky I didn't try the install on a remote station that's connected through ether..... I didn't have this with 4.7 ...
by jcem
Wed Apr 28, 2010 9:03 pm
Forum: General
Topic: Re: RouterOS v4.8 released
Replies: 37
Views: 6588

Re: RouterOS v4.8 released

I have done two upgrades to 4.8 on RB433AH on both the either port indicated inactive and had to be cycled disabled/enabled before it came on line - this happens after every reboot I'm lucky I didn't try the install on a remote station that's connected through ether..... I didn't have this with 4.7 ...
by jcem
Thu Apr 22, 2010 10:09 pm
Forum: Wireless Networking
Topic: Wlan on Win power Plant?
Replies: 1
Views: 511

Wlan on Win power Plant?

Does anyone have experience of mounting wlan on a wind powerplant? I have a request to connect two wind parks. The tower is about 90m hight and wing radius of about 45m. This means that I have LOS up to about 45m, but is it possible to mount the wlan at 70m? This equals to about 1 wing pass/sec What...
by jcem
Thu Apr 01, 2010 12:36 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 288733

Re: 802.11n

I'm not sure you tried this....... When looking on the front of the R52n card antenna connectors up: - I only "check" chain0 when the antenna is connected to the left connector on the card - I only "check" chain1 when the antenna is connected to the right connector on the card Only "check" the appr...
by jcem
Wed Mar 31, 2010 3:28 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 288733

Re: 802.11n

AP is a 433 with R52NH and two 6dBi omni, one client is a 19dBi rootenna, 411 and R52N, other is a dual band rootenna with 411 and R52N. I've tried two different cards, two different RB433, two different CPE, different sets of pigtails. I'm not sure you tried this....... When looking on the front o...
by jcem
Mon Mar 29, 2010 12:38 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 288733

Re: 802.11n

@ jcem TCP, TCP, TCP...................

I can't show you tcp from were I'm at. Only about 30Mb that RB600 can generate...
tcp.png
RGDS
by jcem
Sun Mar 28, 2010 11:42 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 288733

Re: 802.11n

I have some traffic so I can only show you 45Mb and 85Mb right now... I can't show you tcp from were I'm at. Only about 30Mb that RB600 can generate... I know udp isn't exactly relavant, but the point I'm showing is the the Link doesn't break down when using this types of settings. I'm not an expert...
by jcem
Sun Mar 28, 2010 6:00 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 288733

Re: 802.11n

Sure you can do it in winbox......

First change to "Advanced Mode"

and then check "Configured" under the "Data Rates" tab

Now proceed as I described previously

RGDS
by jcem
Sat Mar 27, 2010 1:27 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 288733

Re: 802.11n

Just to add to My previus post....

I only make changes to the AP and leave the station in default.
by jcem
Fri Mar 26, 2010 9:05 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 288733

I have a 5km link with 2 r52n cards on which I only use single chain and Signal-77. After have tried many different settings on this link I found the following.... 1. Increasing the "hw retries" to 10 2. Setting the "Ack Timeout" to 75us - In the default setting the link established with a "Ack Time...
by jcem
Mon Mar 15, 2010 12:03 am
Forum: RouterBOARD hardware
Topic: Usb port invalid
Replies: 45
Views: 22460

Re: Usb port invalid

Trying the same settings with a second RB 411U works without any problems!

:?
by jcem
Sun Mar 14, 2010 8:11 pm
Forum: RouterBOARD hardware
Topic: Usb port invalid
Replies: 45
Views: 22460

Re: Usb port invalid

I tried this too with the delay, but the same result

Is the port supposed to be invalid if you boot RB with no USB attached?
by jcem
Fri Mar 12, 2010 11:51 pm
Forum: RouterBOARD hardware
Topic: Usb port invalid
Replies: 45
Views: 22460

Re: Usb port invalid

I can confirm this problem with E220 and ROS 4.6. A cold restart allwas has to be followed by a Reboot

RGDS
by jcem
Fri Jan 01, 2010 8:03 pm
Forum: RouterBOARD hardware
Topic: R5H problems
Replies: 72
Views: 17416

Re: R5H problems

I had one R5H card smoking today when moving it from one RB433AH to another RB433AH :(
by jcem
Tue May 26, 2009 2:05 am
Forum: General
Topic: WDS problem colubris
Replies: 1
Views: 422

Re: WDS problem colubris

It turned out that Colubris isn't compatible with MT WDS

The solution was to make a WDS slave with the Colubris

RDGS
by jcem
Sun May 24, 2009 5:25 pm
Forum: General
Topic: WDS problem colubris
Replies: 1
Views: 422

WDS problem colubris

Hi! I've set up a bridge from MT433AH/R52/R52 to a colubris MAP-320R AP with WDS behind a zyxel router 5Ghz Link to Colibris and 2,4Ghz AP. bridged with WDS Ping OK - internal/external and ip and dn Bandwitdh test 25Mb Webbrowsing works only sometimes and takes up to 1min before they start loading I...