Yes, you can.

Remember that VLAN is a Standar part of 802.1q, you can config the 1910 and MIKRORIK like any other switch.

Regards.

Hi friend, The configuration at the MK depends of the config you has in your switch. If you switch are configure at access port, at the mikrotik you don't has to do nothing, just add the IP address and mask in the interfaces (ether2 and ether 3). If you're switch ports are configured as trunk, then ...

I don't understand very clear your problem,but, if you want to get internet by Wan2, you need a NAT Masquerade of WAN2 interface.

I read lod time ago tha5 NStreme was developed for PTP Links and NV2 was upgrade for better support to PtMP links.

Anyway, I see that the develop of wireless link at Mikrotik is "Stopped".. Cambium, Mimosa and Ubiquiti has better products for wireless links right now.

Great script, Thanks! #some Variables :local hostname [/ip cloud get dns-name] #resolve current dns-address :local resolvedIP [:resolve "$hostname"] #get current external IP tool fetch mode=http url="http://myip.dnsomatic.com/mypublicip.txt" :delay 1 :local currentIP [/file get m...

If Router 2 works when connected to Main router, then the problem must be at Router 1.

Please post config of Main, Router 1 and Router 2.

Your configuration looks good, to understand the problem, can you post your configuration of the 3 routers?

Another question, the trunk port and access ports is working fine at Router 1?

You only need to configured Mikrotik as Dns server and assign this DNS via DHCP.

Could you show me how to do it pls

/ip dns
primary dns= Original DNS1
secondary-dns=Original DNS2
allow-remote-request=yes

But you need to understand how DNS works.

Did you try to configure your Mikrotik as Vpn client?it must work.

You only need to configured Mikrotik as Dns server and assign this DNS via DHCP.

Please be more specific. Explain with details what do you want?

+1 for UDP
+1 for Compression
+1 for Pushing Routes

Add a Firewall Rule allowing the IP address of the remote VPN server via the Wan interface you want, and block the access to the another wan for the IP of the remote VPN server.

I has the same scenario and that's what I do, but I don't has Load balance.

Please post your configuration:
/export compact

I don't understand your question, scripts run in RouterOS Background, Winbox doesn't need to be open.

Please give us more detail about.

+1 for IGMP Snooping

Do you need to open just some ports, a dmz or need a 1-1Nat?

In every case you can do the nat rules in every device or a VPN Tunnel from the DVR or Last Router, to the top router (first ).

I recommend a Router and AP separated, because you can't use 500Mbps with WiFi anyway.

For PPTP you can use Radius with the routes option. With OpenVPN you can push a route to the client. http://wiki.mikrotik.com/wiki/Manual:PPP_AAA http://wiki.mikrotik.com/wiki/OpenVPN Hello, i read the Wiki Links you posted, but don't see nothing about send routes to clients using Radius or another...

RSTP?

Ohhhhhh, RSTP looks really well, i'm read the article of wikipedia about RSTP, but can't find information about the mikrotik implementation of RSTP. I know that RSTP is configured in a Bridge....

Can RSTP bridge 3 Interfaces, and do failover and just two ports(Ether2 and Wlan1)?

Thanks.

http://img39.imageshack.us/img39/9523/diagramac.jpg Hi. This is my network. Before i have just a Fiber link between my office. Now i buy two RB600A to do an automatic backup/failover link. But, my problem is that i want to keep my network bridge(transparent), just have the network 10.0.0.0/24. I wa...

Well I just really need a real troughput of 50Mbps, can I reach this in 802.11a(wich mini-pci, board and anntena)? . Otherwise Can you suggest to me some mini-pci that suport 802.11n and a directional anntena?

Thanks.

Thanks normis. I will do a speed test and post the results. You need to update to the lastest version of RouterOS. 3.10 is old. Also, the PS5 is not a very fast device. You re very unlikely to get more than 20 Mbps. Put a routerboard on both sides for 40 Mbps + I think you are right, cause the maxi...

Thanks normis.

I will do a speed test and post the results.

Hi. I Have a Point to Point Link Between a RB600A(with one Ubiquiti XR5) and Ubiquiti PS5-Ext, both with Hyperlink 27dbi antennas. I need a lot of bandwidth, i read that with turbo-mode and superAG features i can reach a good real speed. I set both in 5Ghz-Turbo(40Mhz) and set Fast Frame and burstin...