Community discussions

Search found 52 matches

by xins
Tue Oct 30, 2012 10:00 am
Forum: The Dude
Topic: change default syslog save folder
Replies: 3
Views: 1384

change default syslog save folder

Hi is there a way to change C:/Program Files/Dude/data folder for syslog?
by xins
Wed Dec 28, 2011 6:18 pm
Forum: RouterBOARD hardware
Topic: RB750UP questions/suggestions
Replies: 108
Views: 26653

Re: RB750UP questions/suggestions

Will RB750UP have a voltage monitor?
yes! voltage, current and power consumption

so where i can see those values per port? i know that voltage is the same and max power is 500mA but how can i see how much is in curent use per port?
by xins
Wed Dec 28, 2011 12:28 pm
Forum: RouterBOARD hardware
Topic: RB750UP questions/suggestions
Replies: 108
Views: 26653

Re: RB750UP questions/suggestions

hi can any one tell me where to look for power consumption per port? i cannot find it anywhere
by xins
Sat Nov 12, 2011 4:35 pm
Forum: The Dude
Topic: remove imagine interface bandwitch from graph
Replies: 1
Views: 1192

remove imagine interface bandwitch from graph

hello i stuck on some stupid problem that sometimes smto (or routeros) probe give to big info about transfer for example i get today 2.5gbits on intefrface where bandwitch is max 20mbits i have it set to 17000000 (in properities) but id dont seams to work. any ide how to remove this big points? beca...
by xins
Sun Mar 20, 2011 8:55 pm
Forum: General
Topic: QoS nat limiting with pcq and QT
Replies: 10
Views: 5635

Re: QoS nat limiting with pcq and QT

i see evryone on this forums is very helpful... so after next days i figure this out :P and im still share this with u people. AND dont say that nobody have NATED networks? :P MANGLE: /ip firewall mangle add action=mark-connection chain=forward disabled=no new-connection-mark=\ 2m_up_conn out-interf...
by xins
Fri Mar 18, 2011 3:23 pm
Forum: General
Topic: QoS nat limiting with pcq and QT
Replies: 10
Views: 5635

Re: QoS last battle

ok aftere some testing i mange to mangle corectly upload traffic: http://img228.imageshack.us/img228/2220/mangleupload.th.jpg Uploaded with ImageShack.us and here is the conf for QT: /queue tree add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 \ max-limit=5M name=upload paren...
by xins
Fri Mar 18, 2011 2:53 pm
Forum: General
Topic: QoS nat limiting with pcq and QT
Replies: 10
Views: 5635

Re: QoS last battle

Ok i was staring at this hole night... and from page 10: Global-Out or Interface HTB? There are two fundamental differences In case of SRC-NAT (masquerade) Global-Out will be aware of private client addresses, but Interface HTB will not – Interface HTB is after SRC-NAT Each Interface HTB only receiv...
by xins
Thu Mar 17, 2011 4:17 pm
Forum: General
Topic: QoS nat limiting with pcq and QT
Replies: 10
Views: 5635

QoS nat limiting with pcq and QT

Hi all, im strugling for quite some time witch PCQ and QT. i have specific plan and i can't figure this one by my self... i have a core router with one bridge and one wan (NATted) and now im trying to do as Megis shown us in US 2009 MUM. on bridge i have pppoe server. i want to limit upload and down...
by xins
Wed Mar 16, 2011 5:42 pm
Forum: The User Manager
Topic: how to add user ip address to address list in ROS with UM?
Replies: 5
Views: 1195

Re: how to add user ip address to address list in ROS with U

Thx guys.

You made me to look for it and i find it in profile limitations constraints.
by xins
Wed Mar 16, 2011 11:56 am
Forum: The User Manager
Topic: how to add user ip address to address list in ROS with UM?
Replies: 5
Views: 1195

how to add user ip address to address list in ROS with UM?

Hi, while i was looking over radius support i have seen that i can add user ip address to address list by using option mikrtik:19. is there a way to do that with user manager? or is it possible to add this address of user to a list on diffrent RB then the request was from? it would be nice because i...
by xins
Sat Dec 18, 2010 12:54 pm
Forum: The User Manager
Topic: user-manager profile v5.RC5
Replies: 3
Views: 1602

user-manager profile v5.RC5

Hello im trying to build api client to mantain user-manager but there is somethink i cant find. Did any one seen user-manager profiles in CLI? because when i add user he need's to get profile (under www panel it is possible) but with winbox it is not... and i hate this www panel :) maby i ddin't be ...
by xins
Sat Dec 04, 2010 12:47 am
Forum: Scripting
Topic: How to disable firewall rule? API
Replies: 5
Views: 2387

Re: How to disable firewall rule? API

THANKS!!! They should employ you to make manual:)
by xins
Fri Dec 03, 2010 10:49 pm
Forum: Scripting
Topic: How to disable firewall rule? API
Replies: 5
Views: 2387

Re: How to disable firewall rule? API

can you show me yours progtalk method? i use this one from mikrotik forum: public String[] progTalk(String text){ text=text.trim(); int counter = 0; String tag = ""; if (text.contains("\n")){ tag = text.substring(0,text.indexOf("\n")); } else tag = text; text = text.concat("\n.tag="+tag); String[] i...
by xins
Fri Dec 03, 2010 4:35 pm
Forum: Scripting
Topic: How to disable firewall rule? API
Replies: 5
Views: 2387

How to disable firewall rule? API

hello im using java client for API and i have a problem with disabling firewall rule i put somethink like this: ad.progTalk("/ip/firewall/filter/set\n=disabled=yes\n=.id=0"); and the response is like: !trap =category=0 =message=no such item .tag=/ip/firewall/filter/set !done Any ideas? i think is so...
by xins
Thu Aug 12, 2010 7:49 pm
Forum: General
Topic: Priority with DSCP or Address List not working
Replies: 8
Views: 2711

Re: Priority with DSCP or Address List not working

it is easy job :) you need to mark packets in and out (2x mangle) and then create two trees in both directions. it is beter to use build in switch then bridge on ports 2-5(to do this just select master port to eth2 on interfaces from 3 to 5). example of marking packets add action=mark-packet chain=p...
by xins
Wed Jul 07, 2010 5:11 pm
Forum: General
Topic: Vlan setup causes loop when router reboots
Replies: 2
Views: 798

Re: Vlan setup causes loop when router reboots

enanble STP on all wlan interfaces
by xins
Fri Jun 11, 2010 12:09 pm
Forum: General
Topic: How to get real-time information of interface
Replies: 3
Views: 549

Re: How to get real-time information of interface

the only way is to get for example full packets then after some time (for example 1 min) get this value once again and do the math :

second - first = your one minut packet flow

there is no other way
by xins
Tue May 04, 2010 7:38 pm
Forum: General
Topic: how to limit pps and connections?
Replies: 1
Views: 503

how to limit pps and connections?

Hello i know that was several times here but besides simple formula for firewall (but You can write it here) i want to ask how many connections and pps give to clients in. 1. 256k/56k 2. 512k/96k 3. 1024k/128k 4. 2048k/256k any ideas? i have bad dsl conn with 8M/1M and it dies around 600 pps both di...
by xins
Thu Apr 22, 2010 9:10 pm
Forum: General
Topic: RouterOS v4.7 released
Replies: 72
Views: 13387

Re: RouterOS v4.7 released

In change log:
"dns cache rotates order of records in reply messages"

What does this mean?
Round-Robin =) if cached request has multiple A records, they are rotated for each response

p.s. what is 'silentboot'?..
no bip bip on booting :D
by xins
Mon Apr 19, 2010 9:20 am
Forum: General
Topic: RouterOS 5 beta
Replies: 97
Views: 18755

Re: RouterOS 5 beta

nice work for beta :)
now we can just use web browser in our phones etc etc

just add terminal in webfig :)
by xins
Wed Apr 07, 2010 10:27 pm
Forum: General
Topic: Polish MUM load balancing with PCC question
Replies: 6
Views: 1427

Re: Polish MUM load balancing with PCC question

I see it now... it was'nt MT... it was my neted network. when i put two public networks it works just fine(just great i mean :D:D)
by xins
Tue Mar 30, 2010 1:57 pm
Forum: General
Topic: funny configuration with pppoe and local lan
Replies: 3
Views: 500

Re: funny configuration with pppoe and local lan

yes :) but i will use rb750 for them... but i was thinking about using bridge that allow them to use lan ip's (not nated again) and use pppoe for internet(here should be nat I think) and they just use gatway of the rb750. Is that possible? using another subnet and nat it to the lan and pppoe is easy...
by xins
Mon Mar 29, 2010 5:12 pm
Forum: General
Topic: funny configuration with pppoe and local lan
Replies: 3
Views: 500

funny configuration with pppoe and local lan

Hi i have a need to make this funny conf so maby You will try to help :) I have fast ethernet network with gatway 192.168.0.1 and the pppoe server(10.0.0.1) on the same core router(MT)interface. dhcp is for free users (192.168.0.0/24) and pppoe is for pay ones (10.0.0.0/24) the think is some of them...
by xins
Fri Mar 12, 2010 7:50 pm
Forum: General
Topic: PPP and SNMP oid's.
Replies: 3
Views: 1308

Re: PPP and SNMP oid's.

as no one was kind enought to help me i have found it by my own :)


simply You need to use interfece descrpition or name like:

Target[192.168.1.13_1770]: \<pppoe-iwcia1>:public@192.168.1.13:


and that all :) so easy

I will test it further :)
by xins
Thu Mar 11, 2010 4:00 pm
Forum: General
Topic: PPP and SNMP oid's.
Replies: 3
Views: 1308

PPP and SNMP oid's.

Hello,

I started playing with mrtg tool (witch is preety good).

and I wonder if there is a way to bind oid number to specific pppoe account.

right now when someone connects get allways new oid(next one).


i wonder what is "caller ID" in ppp secret tab?
by xins
Mon Mar 08, 2010 4:00 pm
Forum: General
Topic: Polish MUM load balancing with PCC question
Replies: 6
Views: 1427

Re: Polish MUM load balancing with PCC question

yes they are counting packets.... even equaly... ECMP like you say is out of the question becouse of banking problem or other stuf like games and so on. I want PCC for both-addresses parameter. torch shows only some arp and dhcp packets on WAN_ADSL and all traffic on WAN_DSL... its madness. its shou...
by xins
Mon Mar 08, 2010 3:12 pm
Forum: General
Topic: DHCP server load balancing
Replies: 4
Views: 1255

Re: DHCP server load balancing

You can use radius for storing dhcp lease info.
by xins
Mon Mar 08, 2010 2:47 pm
Forum: General
Topic: Polish MUM load balancing with PCC question
Replies: 6
Views: 1427

Re: Polish MUM load balancing with PCC question

Problem might be related to fact that one of your "WAN IPs" is from private range. and traffic simple can't get back to router. its just my another RB there conected to the ADSL line. and thats give me some thoughts. but when i disable WAN_DSL1 interface it switches to ADSL internet (after i added ...
by xins
Mon Mar 08, 2010 1:41 pm
Forum: General
Topic: Polish MUM load balancing with PCC question
Replies: 6
Views: 1427

Polish MUM load balancing with PCC question

Hello first I let you see my config (it contains only commands from MUM presentacion http://mum.mikrotik.com/presentations/PL10/balancing.pdf ) [admin@RB433_APC] > interface ethernet print Flags: X - disabled, R - running, S - slave # NAME MTU MAC-ADDRESS ARP MASTER-PORT SWITCH 0 R local 1500 00:0C:...
by xins
Fri Mar 05, 2010 10:09 pm
Forum: General
Topic: MUM Poland 2010 thread
Replies: 113
Views: 24343

Re: MUM Poland 2010 thread

yeah the MUM was great (my first one btw. I felt like a virgin:D:D:D) I even speek with chupaka (yeah thats me;P this big guy who ask about your age:)) Evrything was very nice exept presentations made by interp***** :) they realy suck at those :) (its my subjective opinion as allways) So see you nex...
by xins
Sat Jan 23, 2010 11:40 pm
Forum: General
Topic: QOS: how can one identify heavy side of an TCP connection?
Replies: 8
Views: 1252

Re: QOS: how can one identify heavy side of an TCP connection?

its very easy :)

search forum or wiki for connection bytes and conn rate :) for mangle

and then chocke it in QT
by xins
Mon Jan 18, 2010 10:42 pm
Forum: General
Topic: MUM Poland 2010 thread
Replies: 113
Views: 24343

Re: PL MUM HOTEL PRICE (sticky please)

I am sure you can find something cheaper in poland :) if i get any offer i will post it here

for example in Rzeszów cheapest "hotel";p cost about 30zł without meals and there is plenty places were you can eat for less then 40 zł for dinner

You just have to know where to look for it:)
by xins
Sat Jan 16, 2010 7:50 pm
Forum: RouterBOARD hardware
Topic: strange cpu freq of 750G router
Replies: 6
Views: 1126

Re: strange cpu freq of 750G router

i will :) maby we will talk about it there:D
by xins
Fri Jan 15, 2010 2:37 pm
Forum: RouterBOARD hardware
Topic: strange cpu freq of 750G router
Replies: 6
Views: 1126

Re: strange cpu freq of 750G router

such a simple thing :) thx Normis

btw why it has core set to 300Mhz?? i didn't do that so someone from Mikrotik or reselers have to do that:)
by xins
Fri Jan 15, 2010 2:26 pm
Forum: RouterBOARD hardware
Topic: strange cpu freq of 750G router
Replies: 6
Views: 1126

Re: strange cpu freq of 750G router

SN: 1FC201AD20CF/943

and yes it runs gigabit

I get it with ROS 3.31 so it should be 750G

but i didn't check the core freq before upgrade to 4.5 but it should not matter:)
by xins
Fri Jan 15, 2010 1:54 pm
Forum: RouterBOARD hardware
Topic: strange cpu freq of 750G router
Replies: 6
Views: 1126

strange cpu freq of 750G router

it shows 300Mhz and it should be 680Mhz does it?
photo
by xins
Wed Dec 02, 2009 8:04 pm
Forum: General
Topic: MikroTik Newsletter #22 PDF
Replies: 6
Views: 3756

Re: MikroTik Newsletter #22 PDF

great new products :) im very exited with this RB750G, but the RB800 blows everything away:D
by xins
Wed Nov 25, 2009 12:43 pm
Forum: General
Topic: hotspot universal client
Replies: 4
Views: 1128

Re: hotspot universal client

its one-to-one nat, its for you, its does not matter what ip have the hotspot client in his properities(dynamic or static) you can set "to address" as you want and then mangle it or anything. he will always have ip bind to hotspot user( so he wont cheat you)
by xins
Sun Nov 15, 2009 12:43 pm
Forum: General
Topic: Mesh network question
Replies: 2
Views: 589

Re: Mesh network question

mesh is something diffrent than thing you want to achive... the simplest way to do this is to build big bridge and name all the hotspot with the same SSID with some central auth server.

btw. mesh is a way to find best way over the network with some redundancy and possible failure in some places.
by xins
Sun Nov 15, 2009 12:33 pm
Forum: General
Topic: Does the RB493 support the switch feature on ROS 4.2?
Replies: 6
Views: 1174

Re: Does the RB493 support the switch feature on ROS 4.2?

I think he ment the switching for VLAN's implemented in ROS 4.2 and placed in main menu under "switch" and no it does not work on any RB right now from my exp. maby switching chips dont have this ability jet ?
by xins
Wed Oct 14, 2009 10:01 am
Forum: General
Topic: 4.0 final doesn't work on RB750
Replies: 13
Views: 1338

Re: 4.0 final doesn't work on RB750

Personally i have no problems with upgrading RB750 to RoS 4.0
by xins
Tue Oct 13, 2009 5:11 pm
Forum: General
Topic: Traffic mangle.
Replies: 6
Views: 1114

Re: Traffic mangle.

yeah i can't get this *.exe and many file types to work with L7 mangle(eg rar)...
by xins
Wed Sep 23, 2009 8:38 pm
Forum: General
Topic: New firewall matcher - CONNECTION RATE
Replies: 64
Views: 13717

Re: New firewall matcher - CONNECTION RATE

yes its true that games use one connection but which game use so much bandwith to get into havy-conn ?

you can download 2GB with speed lower than connection rate and you still be non havy.

the problem is how big/small parameters shall we use:)
by xins
Wed Sep 23, 2009 6:50 pm
Forum: General
Topic: New firewall matcher - CONNECTION RATE
Replies: 64
Views: 13717

Re: New firewall matcher - CONNECTION RATE

some question is bugying me today... is it possible to use this as full QoS without mangling per protocol? becouse if we have put all downloaders in havy-conn after 0.5MB they just get low priority. as i see in my network the most traffic is exactly havy-conn so all people who open pages, play games...
by xins
Wed Sep 23, 2009 12:48 am
Forum: General
Topic: New firewall matcher - CONNECTION RATE
Replies: 64
Views: 13717

Re: New firewall matcher - CONNECTION RATE

its so easy my friend :) for example someone is downloading large file from web (~100MB) and u dont want that he will use all the bandwith you have so if you set up this config from toturial on wiki you get something like this: when he start download first 500KB goes with speed of non havy-conn but ...
by xins
Tue Sep 22, 2009 8:29 pm
Forum: General
Topic: New firewall matcher - CONNECTION RATE
Replies: 64
Views: 13717

Re: New firewall matcher - CONNECTION RATE

so far everything from toturial works fine:) hehe beware rapidshare:)

can this be specifide to only port 80?

hehe i will check it in a sec:)

edit:

true it can work like it:)
by xins
Fri Sep 18, 2009 1:47 pm
Forum: General
Topic: New firewall matcher - CONNECTION RATE
Replies: 64
Views: 13717

Re: New firewall matcher - CONNECTION RATE

if it will work it gonna be ultimate wepon against rapidshare:)
by xins
Thu Jul 16, 2009 9:56 am
Forum: General
Topic: Two PPPoE servers
Replies: 5
Views: 796

Re: Two PPPoE servers

yes you can do that. best if you have some radius server for auth (or have doubled secrets on both RB's) and then just set the second RB to ping first one, when ping fails turn on pppoe :)
by xins
Thu Jul 16, 2009 9:07 am
Forum: General
Topic: Newsletter #19
Replies: 20
Views: 3360

Re: Newsletter #19

hehe thx for replay i just find it in another shop:) it seems my old dist get lasy:p
by xins
Thu Jul 16, 2009 12:38 am
Forum: General
Topic: Newsletter #19
Replies: 20
Views: 3360

Re: Newsletter #19

The question is when all of this will be available in poland for example?
by xins
Thu Jun 18, 2009 7:37 pm
Forum: General
Topic: Help with my network
Replies: 2
Views: 492

Re: Help with my network

no you can not do that in squid... mayby u should use some transparent QoS beetween squid and switch or just plug switch to the rb433 and make QoS there for wired and wireless clients
by xins
Tue Jun 16, 2009 9:46 pm
Forum: General
Topic: Hotspot and some urgent questions
Replies: 0
Views: 349

Hotspot and some urgent questions

Hi i'm using rb450 only ethernet connections:) my network looks like: internet-->rb450-->switch(2xNetGear10/100)-->users(around 46). I'm using 3 types off accounts free(64k/256k), pay1(96k/512k), pay2(128k/1024k) i try to set this limits with user profiles in hotspot but with load of 25 users i get ...