Community discussions

MikroTik App

Search found 342 matches

  • 1
  • 2
by Diganet
Thu Nov 13, 2008 12:07 pm
Forum: General
Topic: RouterOS v3.x and RB100 series boards problem
Replies: 4
Views: 1600

Re: RouterOS v3.x and RB100 series boards problem

We had several issues while upgradin RB112 and RB133c boards to v3.x RouterOS.
1. CPU usage goes sky high
2. Board dies after upgrade. It is impossible to get it working even with serial cable.
You need to uninstall/disable all unnessecary packages. V3 takes more resources..

/Henrik
by Diganet
Thu Nov 13, 2008 12:04 pm
Forum: General
Topic: Eoip through another Eoip
Replies: 3
Views: 1424

Re: Eoip through another Eoip

I have a situation that needs one EOIP tunnel to be channeled through another EOIP tunnel. As far as I see it, it should not be a problem, but before I commit to this in production enviroment, I would like to know if somebody can confirm that there would be no problems with that configuration. On e...
by Diganet
Tue Oct 14, 2008 9:40 pm
Forum: General
Topic: Challenge for Mikrotik techs. Virtual WLAN Cells.
Replies: 20
Views: 5170

Re: Challenge for Mikrotik techs. Virtual WLAN Cells.

Hi, do you know how? : D! Teach me please! Well roaming seamlessly is a client feature, NOT an AP feature. I haven't testet what you are asking for, but it would be easy to do so just by setting 2-3 AP's with some distance between them, with same SSID/MAC etc. bridge them all together and see how t...
by Diganet
Tue Oct 14, 2008 2:24 pm
Forum: General
Topic: Challenge for Mikrotik techs. Virtual WLAN Cells.
Replies: 20
Views: 5170

Re: Challenge for Mikrotik techs. Virtual WLAN Cells.

Hi all, I've seen a lot of installations for the spanish government that request virtual WLAN Cells. (Meru networks can do it but there is a expensive solution) This is a WLAN with a controller and a lot of APs working like only one. All APs with the same channel frequency, the same MAC and the sam...
by Diganet
Tue Oct 07, 2008 1:07 am
Forum: Wireless Networking
Topic: P2MP Nstreme tests Dropped Connections and Throughput
Replies: 6
Views: 2087

Re: P2MP Nstreme tests Dropped Connections and Throughput

Frequency, channel size, location, height, interference, etc. do not make a difference, I have tested on different sites and frequencies to rule out radio cards etc. The site tested at range from 90ft to a 300ft, from out in the boonies to an area with a fair about of canopy gear. The only thing of...
by Diganet
Wed Oct 01, 2008 10:02 pm
Forum: RouterBOARD hardware
Topic: AP Question
Replies: 3
Views: 1410

Re: AP Question

Hello, I have the following configuration for an Access Point: rb433, xr5, sector antenna - 19dbi I would like to know how many subscribers can I give service to with this configuration. On the subscriber side I would be using a NANO 5 Stations. Regards, Ignacio How much bandwidth will be allocated...
by Diganet
Wed Oct 01, 2008 9:49 pm
Forum: Beginner Basics
Topic: Connection problem
Replies: 6
Views: 1460

Re: Connection problem

Hi, I have 2 RB133 with Ubiquiti XR9 cards and RB 2.9.46 version. All the ports in the RB133 are in bridge mode, include wlan. One wlan is in APBridge mode and the other in station mode. The system shows the associated client and the log show the correct assciation. But, I can´t ping the other RB13...
by Diganet
Wed Oct 01, 2008 9:46 pm
Forum: Beginner Basics
Topic: Why am I not reaching? – Problem with Remote Desktop
Replies: 2
Views: 1320

Re: Why am I not reaching? – Problem with Remote Desktop

I have this situation: 192.168.1.2 PC running Remote Desktop Server 192.168.1.1 Gateway A 192.168.224.254 192.168.224.1 Gateway B 10.1.1.224 10.1.1.1 Gateway C x.y.z.n (public IP) All three gateways have a DST-NAT rule for port 3389 like this: add chain=dstnat action=dst-nat to-addresses=192.168.22...
by Diganet
Wed Oct 01, 2008 9:43 pm
Forum: Beginner Basics
Topic: Nobody helps on community support (general)
Replies: 7
Views: 2151

Re: Nobody helps on community support (general)

I added one ip address from the block of addresses to the lan card on the ISP modem (mikrotik) ,and another to the server, some routes and rules too: 266.266.266.x subnet is example :) MODEM: ip address add address=266.266.266.1/27 interface=ether1 ip route add dst-address=266.266.266.3/27 gateway=...
by Diganet
Wed Oct 01, 2008 9:37 pm
Forum: Beginner Basics
Topic: logging
Replies: 2
Views: 1103

Re: logging

hi..


i have rb 150 and i want to know what sites has been viseted

thans regard
Use netflow or ntop app.

Regards

/Henrik
by Diganet
Wed Oct 01, 2008 9:35 pm
Forum: Beginner Basics
Topic: Kick Router Name
Replies: 13
Views: 2647

Re: Kick Router Name

Use hotspot feature.. It works for me.

I have setup a Radius server that handles known (good mac's) and logs them in automaticly throgh the hotspot server and everybody unknown get's the login page...

Regards

/Henrik
by Diganet
Wed Oct 01, 2008 9:29 pm
Forum: Beginner Basics
Topic: Clarification regarding packet flow
Replies: 5
Views: 1865

Re: Clarification regarding packet flow

I am trying to understand the packet flow diagram in the ref. manual. After prerouting the package reach a decision point where it goes either to the input chain or the forward chain. I read in the section "filtering" that the decison is based upon wether the package is addresses to IP be...
by Diganet
Wed Oct 01, 2008 9:21 pm
Forum: Beginner Basics
Topic: External IP changed now I can't connect to LAN from WAN
Replies: 3
Views: 1207

Re: External IP changed now I can't connect to LAN from WAN

Thanks- tried that; however, firewall rules don't specifically mention the old IP address- only the interface it exists on. The IP > Address List does contain the wrong (old) IP. When I change this to the new one the connection simply stops working. Which I find strange. Since the old address/netwo...
by Diganet
Mon Sep 29, 2008 5:39 pm
Forum: Beginner Basics
Topic: Link "Public IP to Local" isn't working... Help...
Replies: 2
Views: 1201

Re: Link "Public IP to Local" isn't working... Help...

Hi, I use RouterBOARD 333. One interface is local (192.168.0.0/24) second is Public (1.2.3.16/28). To access Internet I set up chain=srcnat action=masquerade rule. The problem is that I need to assign some public IP to local ones (like 1.2.3.30 to 192.168.0.100, 1.2.3.20 to 192.168.0.50...), to acc...
by Diganet
Thu Sep 18, 2008 10:07 pm
Forum: General
Topic: Pcengines ALIX 2C3 + Huawei E220 almost perfect
Replies: 8
Views: 3395

Re: Pcengines ALIX 2C3 + Huawei E220 almost perfect

Got a couple of 6b2 that I will test the next days.
ROS 3.13 runs without problem on ALIX 6b2 + Huawei E220.

/Johan
Yep.. But try with 3.14 :(

/Henrik
by Diganet
Wed Sep 17, 2008 6:35 pm
Forum: General
Topic: RouterOS v3.14rc1 released
Replies: 42
Views: 7957

Re: RouterOS v3.14rc1 released

It has nothing to do with that. Drivers that are not digital signed is a matter of Micro$oft wants money for signing drivers and a lot of of vendors doesn't want to pay them for that.

I think it's related to a bug in the new release (new linux kernel)

/Henrik
by Diganet
Tue Sep 16, 2008 3:25 pm
Forum: General
Topic: Pcengines ALIX 2C3 + Huawei E220 almost perfect
Replies: 8
Views: 3395

Re: Pcengines ALIX 2C3 + Huawei E220 almost perfect

Hi all, New mikrotik user here from today on:), the reason for using it is the support for all kind of HSDPA USB cards. I installed it today on pcengines ALIX board, do a basic setup, and connect USB modem. I was playing with open source distros with no luck., but router os worked from first try. I...
by Diganet
Sun Sep 14, 2008 12:49 am
Forum: General
Topic: Feature Request : TFTP server
Replies: 27
Views: 10182

Re: Feature Request : TFTP server

Wouldn't it be more logic to put this feature in the Dude instead? It already holds lots of different devices and perhaps it could do some nice config stuff as well on the devices if they support SNMP-write?-- Just an idea.

/Henrik
by Diganet
Thu Sep 04, 2008 5:02 pm
Forum: Beginner Basics
Topic: Need Help about configuring routes
Replies: 3
Views: 1678

Re: Need Help about configuring routes

Either you should NAT from 10.x.x.x to 192.x.x.x or you should put a route in the 192.xx gw pointing to 10.x.x.x through the .2 interface of the MT.

/Henrik
by Diganet
Sat Jul 26, 2008 2:09 am
Forum: Wireless Networking
Topic: Multiple VLAN ID over wireless link, possible?
Replies: 23
Views: 29368

Re: Multiple VLAN ID over wireless link, possible?

Normis/Janis/Everyone, Please help... I have try to draw my scenario, please give me advice. I am using RouterOS 3.11 on both radio clients and Access Point radio http://img295.imageshack.us/img295/1249/vlanvg6.jpg Please advice, any reply will be highly appreciated Thank you note: i updated the pi...
by Diganet
Sun Jul 20, 2008 2:23 am
Forum: General
Topic: Brouter mode?
Replies: 2
Views: 1238

Re: Brouter mode?

We need to bridge these 80 or so UDP ports through our routers. Everything else should remain routed. I am not sure the best place to start with this. In the Add brouter dialog, the port options are greyed out. I have enabled conntrack. any ideas? I would make a VLAN for this kind of traffic so you...
by Diganet
Sun Jul 20, 2008 1:23 am
Forum: RouterBOARD hardware
Topic: RB333 Lock Up?
Replies: 8
Views: 2492

Re: RB333 Lock Up?

Hello Henrik my friend :)

Have you try'd to Netinstall a fresh copy? (maybe format the NAND first).
Hehe :) Nope, did it all remote ! (VLAN switches rocks!)

/HP
by Diganet
Sat Jul 19, 2008 10:59 pm
Forum: RouterBOARD hardware
Topic: RB333 Lock Up?
Replies: 8
Views: 2492

Re: RB333 Lock Up?

I had a 333 running as wan router. All of a sudden today we had problems with throughput and packetloss and found out that the 333 even with no CPU consumption and 100/100 Ethernet links wouldnt route more than 1-2 Mbit/s. It has been running for 7-8 months. Tried to change PSU and that helped for a...
by Diganet
Sat Jul 19, 2008 10:40 pm
Forum: RouterBOARD hardware
Topic: Bridge problems
Replies: 2
Views: 1376

Bridge problems

Hi, Have some issues with bridging i don't understand. I have a bridge on a RB1000 ROS 3.11. This bridge have 2 ports, Ether 1 and 2. Bridge holds several public IP's in a /24 for natting to CPE's. Ether 1 goes to WAN router and Ether 2 goes to switch in the inside having servers with IPs in the sam...
by Diganet
Thu Apr 17, 2008 12:16 pm
Forum: General
Topic: Feature request - a *whole connection* logging facility
Replies: 3
Views: 2102

Re: Feature request - a *whole connection* logging facility

Hello, It would be really helpful to have a facility that would log the whole connections, just like some dedicated firewall products do. Here's what I mean: Connection from xxx.xxx.xxx.xxx:xxxxx to yyy.yyy.yyy.yyy:yyyyy initiated 2007-07-05T01:00:00+02:00 closed 2007-07-05T01:05:00+02:00 555555/77...
by Diganet
Wed Mar 26, 2008 12:45 pm
Forum: RouterBOARD hardware
Topic: Routerboard RB150 (mini-router)
Replies: 2
Views: 2527

Re: Routerboard RB150 (mini-router)

Hello all, I have a question that fits best into routerboard.com fórum but this is not working for new users so I decided to post here. The question is about the hardware itself. I have a small ISP and I am working with 8 Mbps frame-relay backbone (that comes from a telco). Now I have a fiber camin...
by Diganet
Tue Mar 18, 2008 11:07 pm
Forum: RouterBOARD hardware
Topic: Bandwidth test crashes RB600
Replies: 1
Views: 1354

Re: Bandwidth test crashes RB600

If I leave the default values for "Local UDP Tx Size" and "Remote UDP Tx Size" at 1500 it will crash and reboot my RB600 when testing in the SEND direction to a RB411. However, if I set the Tx size to 32 it seems to run fine. Is this a known issue and how large can I go before i...
by Diganet
Sat Mar 15, 2008 11:12 pm
Forum: RouterBOARD hardware
Topic: 532 and 3.X NOT perfect together!
Replies: 4
Views: 1551

Re: 532 and 3.X NOT perfect together!

It's not a matter OF upgrading... it's a matter of V3.x not working with a 2.9 config...
Don't know what you are doing but i have less problems with 3.x now than i did before on 2.9.x on 532's. Let's see your configuration and tell us what isn't working.

Regards

Henrik
by Diganet
Fri Mar 14, 2008 12:10 am
Forum: General
Topic: CARP and/or GLBP Functionality
Replies: 4
Views: 5193

Re: CARP and/or GLBP Functionality

I really think CARP should be added to RouterOS (even 3.x). The synchronization daemon is extremely useful. Even something LIKE CARP where I could just synchronize my filters and load balance between my gateways. Would keep me from having to duplicate everything and less prone to mistakes. What do ...
by Diganet
Mon Mar 10, 2008 12:26 am
Forum: RouterBOARD hardware
Topic: rb1000 experiance?
Replies: 31
Views: 6260

Re: rb1000 experiance?

OK, its fast... nice :) But, is it noisy? Does it become warm? No issues in upgrading? No issues configuring? Do you consider it to be a worthy replacement for my present Pentium 1Mb memory PC running ros? Do you use webproxy? What flash card do you use? So, you are happy with it? What do you do wi...
by Diganet
Mon Mar 10, 2008 12:13 am
Forum: RouterBOARD hardware
Topic: rb1000 experiance?
Replies: 31
Views: 6260

Re: rb1000 experiance?

Same questions here. My thread died without a single answer. May be no one uses it? Ordered one. So may be I can give answers soon. If it does the job I will replace Cisco and Via miniitx running 2.9. Stefan Had the unit out for tests at a local ISP. Don't know how many BGP sessions, but they loade...
by Diganet
Sun Mar 09, 2008 2:57 pm
Forum: RouterBOARD hardware
Topic: rb1000 experiance?
Replies: 31
Views: 6260

Re: rb1000 experiance?

Already anybody having used or tested the rb1000? I am thinking of ordering one, but would like to hear some opionions from users first...

rgds.

Rudy
Its fast...

/Henrik
by Diganet
Thu Mar 06, 2008 11:45 am
Forum: Wireless Networking
Topic: Self building network - WDS
Replies: 1
Views: 1361

Re: Self building network - WDS

Hello everyone, this post would be a discussion about the possibility of making a self building network using the WDS feature. What I mean is: 1. I sell to my customers a CPE which supports many WDS connections (3-4 not more); 2. in a city not all places are reached by my wireless network, because ...
by Diganet
Wed Mar 05, 2008 1:42 pm
Forum: RouterBOARD hardware
Topic: Transfer speeds on RB153 through Wlan ?
Replies: 9
Views: 2752

Re: Transfer speeds on RB153 through Wlan ?

Yes - that was what I thought ... Anyway - I would also use openvpn - but I would have the same there then, right ? Have to think about something else. Having some more boxes hanging around. meybe I'll use these a VPN Concentrators, and disable encryption completely on WLan - though route only the ...
by Diganet
Wed Mar 05, 2008 12:10 am
Forum: Wireless Networking
Topic: RouterOS on Intel IPX425
Replies: 1
Views: 1403

Re: RouterOS on Intel IPX425

Hi,

Have you tried RouterOS on a IXP425 ADI Pronghorn? Wireless or routing?

Thanks in andvance,
Daniel G.
RouterOS doesn't run on IXP.

/Henrik
by Diganet
Tue Mar 04, 2008 11:54 pm
Forum: General
Topic: multicast routing
Replies: 65
Views: 32924

Re: multicast routing

AFAIK every single client will receive its own stream. and so it will be in wilress, so if 2 clients are connected to multicast single multicast group then each client will receive its stream, so AP will TX twice the stream, so each client receive its own stream.
Exactly :)

/Henrik
by Diganet
Mon Mar 03, 2008 12:24 am
Forum: RouterBOARD hardware
Topic: Any plan for a Higher Processor in a RB150
Replies: 3
Views: 1814

Re: Any plan for a Higher Processor in a RB150

Hey guys. I really like the RB150 for SOHO and mid range LANs. Does anyone one know for a plan to make a 150 with a higher processor??? (like the 133c to 411 evolution). My best guess is that the 4xx series will replace 1xx series very soon. Only 1xx thing back that is usefull is 133 and perhaps 15...
by Diganet
Fri Feb 29, 2008 3:11 pm
Forum: General
Topic: multicast routing
Replies: 65
Views: 32924

Re: multicast routing

Hi Phendry,

I think the only issue in wireless is the broadcast. If 2 clients demand 1 different streams anyone, the 2 streams arrive all clients.

Kike
Why should multicast behave differently because it travels on wireless?

/Henrik
by Diganet
Wed Feb 20, 2008 11:45 pm
Forum: Wireless Networking
Topic: bonding wireless for maximum throughput
Replies: 34
Views: 19947

Re: bonding wireless for maximum throughput

Yes, TCP bandwidth test. The test done on two RB600 latest O.S. Yes, TCP and UDP bandwidth tests done between the two boards directly!! Should we reach more? How much? You may experience that the TCP test is slower when you do it directly between the boards - we have seen it too. You should use tes...
by Diganet
Mon Feb 04, 2008 10:02 pm
Forum: RouterBOARD hardware
Topic: 2 x RB600 WDS link Rebooting
Replies: 1
Views: 1323

Re: 2 x RB600 WDS link Rebooting

I have a 13 km long link build on RB 600 on WDS mone. On one side the RB reboots every 30 or 50 min. Just in day, at night there are no problem. I tryed to change the power suply form clasic 18V to 20 PC notebook adapter 60W. But I was worst.The reboot interval vould be around every 5 minutes.The v...
by Diganet
Thu Jan 31, 2008 11:55 am
Forum: General
Topic: Routing question/problem
Replies: 9
Views: 2092

Re: Routing question/problem

I will but still doubt that will solve my first problem? The one about the routes :)
Still need your IP configuration m8

/Henrik
by Diganet
Thu Jan 31, 2008 3:04 am
Forum: Wireless Networking
Topic: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface
Replies: 28
Views: 4151

Issue Solved

The great support crew @ MT did a fantastic job debugging this problem. It seems like ACL entries with very little bandwith resultet in a buffer overflow in the wireless driver (i did this to blackhole bad users). However removing these ACL entries fixes it for now until a new release comes up. Rega...
by Diganet
Wed Jan 30, 2008 11:30 am
Forum: Wireless Networking
Topic: bonding wireless for maximum throughput
Replies: 34
Views: 19947

Re: bonding wireless for maximum throughput

WiFi is Simplex and TCP is a full duplex protocol
Isn't WiFi actually Half-Duplex?
Half duplex / Simplex. This is why TCP goes slower. UDP is connectionless and TCP needs an ACK back for every packet it sends.

/Henrik
by Diganet
Tue Jan 29, 2008 11:13 pm
Forum: Wireless Networking
Topic: bonding wireless for maximum throughput
Replies: 34
Views: 19947

Re: bonding wireless for maximum throughput

your hardware and signal strenght must be strong. What is your hardware and your signal? We tried in the Lab. RB500 maximum TCP is around 20Mbps, RB300 40Mbps, RB600 40Mbps with maximum signal. (Just agreeing with above quote and put to rest the minds of fellow noobs.) It's true what they say - big...
by Diganet
Tue Jan 29, 2008 12:18 pm
Forum: Wireless Networking
Topic: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface
Replies: 28
Views: 4151

Re: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface

In my case its fixed by removing the bridge. However, if it helps It was to Mikrotik Client It was with CM9 radio cards one was rb133 on was 153 It worked after upgrade from a day of so with no problems when it stopped, reboot did not help get it working again. All i got from support was to change ...
by Diganet
Mon Jan 28, 2008 5:11 pm
Forum: Wireless Networking
Topic: I need a specific ip firewall rule
Replies: 2
Views: 1038

Re: I need a specific ip firewall rule

hello everybody, we use the microtik software in our komplete backbone and in all our access points. Now, i need a specific firewall rule but i don't now, how to make it. What should happen: i try to describe in an example: all queries to the router 192.168.100.1 on port 7171 (port-number is only a...
by Diganet
Mon Jan 28, 2008 1:10 pm
Forum: Wireless Networking
Topic: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface
Replies: 28
Views: 4151

Re: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface

I think the more plauseable explanation is the problem is not version 3 related.
Okay could you please explain why you think it has nothing to do with upgrading ??

/Henrik
by Diganet
Mon Jan 28, 2008 9:39 am
Forum: Wireless Networking
Topic: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface
Replies: 28
Views: 4151

Re: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface

I had a problem with no traffic after upgrade to 3.1

I removed my bridge and it worked.

Something has changed with bridge I think
Yes for sure, just funny that this particular problem follows back to 2.9.50 if you downgrade.

/Henrik
by Diganet
Sun Jan 27, 2008 11:45 pm
Forum: General
Topic: critical issue 98mb flood packets
Replies: 11
Views: 3377

Re: critical issue 98mb flood packets

hi mate You can't block UDP from coming into your interface, you only control what's coming through your router. this has to be done at the switch. If you had the users on different VLANs you could just remove the gw IP address from your router and the packets would have nowhere to travel, but i gu...
by Diganet
Sun Jan 27, 2008 11:33 pm
Forum: General
Topic: Routing question/problem
Replies: 9
Views: 2092

Re: Routing question/problem

Here you go mate.... Pretty quickly did draw this, maybe there's an error.... And by the way as you can see, there is no fifth interface in the router C, drawn that on purpose as that if is going to stay disabled and removed soon. Please show me your interface configurations on all wireless links /...
by Diganet
Sun Jan 27, 2008 9:51 pm
Forum: General
Topic: v3 Documentation MNDP page typo
Replies: 1
Views: 1017

Re: v3 Documentation MNDP page typo

About 2/3 down the page you'll find /ip neigbor I'm curious as to why our v3.0 bridge using nstreme reports 0.0.0.0 on wlan1. The nstreme interface has the IP address, wlan1 does not - is there any way for the nstreme1 interface to take over the wlan1 interface as far as MNDP? If the N-streme inter...
by Diganet
Sun Jan 27, 2008 9:43 pm
Forum: General
Topic: Routing question/problem
Replies: 9
Views: 2092

Re: Routing question/problem

So, I have 3 MT's, A, B and C. A & B have 3 interfaces. C have 5 interfaces. Both A and B are connected to C, to a separate interface. As you can see I've been trying like everything... disabling, adding removing etc... Could it be because of distance? It just got to me, is MT maybe using the w...
by Diganet
Sun Jan 27, 2008 12:16 am
Forum: Wireless Networking
Topic: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface
Replies: 28
Views: 4151

Re: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface

Well I have slower sppeds since 3.1, also upgraded to 3.1 & firmware 2.12 and also proiblem remains after downgrade. Maybe you are onto something with your firmware idea. But then again, you upgraded firmware after problem appeared, after upgrade to 3? Yes, i did the firmware upgrade to 2.12 af...
by Diganet
Sun Jan 27, 2008 12:07 am
Forum: Wireless Networking
Topic: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface
Replies: 28
Views: 4151

Re: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface

I have a similar problem with one or two of my AP's. Henrik - does the client last activity timer in winbox show a stupid value for all the associated users - kinda 18450.4s Malcolm Nope not since i had 3.1 on the Routerboard, think it's the reassoiciation problem that is solved now. Now this parti...
by Diganet
Sun Jan 27, 2008 12:00 am
Forum: RouterBOARD hardware
Topic: RouterOs 3.1 on RB-532A
Replies: 6
Views: 2146

Re: RouterOs 3.1 on RB-532A

I am having problems using RouterOs 3.1 on a RB-500r5. In order to test the newly released RouterOs 3.1 I upgraded the 2 routers, RB-532A's, (08:00 today) closest to me, Merino and Niekerksberg. The rest of my routers were still running on 2.9.50. I am using OSPF routing. The network was working go...
by Diganet
Sat Jan 26, 2008 6:02 pm
Forum: General
Topic: L2TP on RB150
Replies: 10
Views: 2421

Re: L2TP on RB150

Hi all, I am new to this forum, and this is my first post. I hope I am posting in the correct section, so pls excuse my ignorance. I have a RB150 with the 2.9.50 ver firmware, that I have configured to do L2TP VPN. The connection is established and holds up. I want to connect my VOIP adapter to ope...
by Diganet
Sat Jan 26, 2008 5:51 pm
Forum: Wireless Networking
Topic: 3.0 not 5GHz happy
Replies: 5
Views: 1717

Re: 3.0 not 5GHz happy

garbage in = garbage out.
Wauv!
by Diganet
Sat Jan 26, 2008 5:49 pm
Forum: Wireless Networking
Topic: ROS v3.1 Wireless Beacon Problem?
Replies: 28
Views: 4590

Re: ROS v3.1 Wireless Beacon Problem?

But no radio information...
R52H + R52/CM9 !?
by Diganet
Sat Jan 26, 2008 5:44 pm
Forum: Wireless Networking
Topic: ROS v3.1 Wireless Beacon Problem?
Replies: 28
Views: 4590

Re: ROS v3.1 Wireless Beacon Problem?

Nope, it's not in there.
Hmm okay, i see a 133 and a 532A

/Henrik
by Diganet
Sat Jan 26, 2008 5:39 pm
Forum: Wireless Networking
Topic: ROS v3.1 Wireless Beacon Problem?
Replies: 28
Views: 4590

Re: ROS v3.1 Wireless Beacon Problem?

What Hardware are you using?
If you look at what he wrote or the winbox screenshots and ask again, then maybe you would know 8)

/Henrik
by Diganet
Sat Jan 26, 2008 5:31 pm
Forum: Wireless Networking
Topic: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface
Replies: 28
Views: 4151

Re: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface

I also noticed that my clients hardly have any upload so i'm going back to 2.9.50 (if it will) /Henrik Well downgraded to 2.9.50.. Thinks worked for like 30 mins. Then problem came back. I am sure now that problem has something to do with bridging the AP. I saw that i could ping a client 1! time (o...
by Diganet
Sat Jan 26, 2008 1:12 pm
Forum: Wireless Networking
Topic: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface
Replies: 28
Views: 4151

Re: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface

I also noticed that my clients hardly have any upload so i'm going back to 2.9.50 (if it will)

/Henrik
by Diganet
Sat Jan 26, 2008 1:05 pm
Forum: Wireless Networking
Topic: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface
Replies: 28
Views: 4151

Re: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface

Hi We can report that the 3.0 did the same, But! update the Bios on the RB532 then it works. //Rickard Did the update of firmware but still the same issue. Stops forwarding after a while. All clients stays connected and ARP table shows them all. Maybe a bridge problem. I have sent supout to support...
by Diganet
Fri Jan 25, 2008 10:34 pm
Forum: Wireless Networking
Topic: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface
Replies: 28
Views: 4151

Re: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface

Hi

We can report that the 3.0 did the same, But! update the Bios on the RB532 then it works.

//Rickard
Thanks m8, done that now. I tell you after the weekend how things went :)

/Henrik
by Diganet
Fri Jan 25, 2008 7:50 pm
Forum: Wireless Networking
Topic: RouterOS V3.1 stops forwarding traffic on 2.4GHz interface
Replies: 28
Views: 4151

RouterOS V3.1 stops forwarding traffic on 2.4GHz interface

Hi, Anbody experienced problems with 532A/R52*2, RoS V3.1 ? Association problems seems to be gone and very stable but all of a sudden there's no traffic being forwarded on 2.4Ghz. Have 1 Virtual AP on this radio as well. The other radio is running at 5Ghz and haven't got this problem. Seems like dis...
by Diganet
Thu Jan 24, 2008 1:50 am
Forum: Wireless Networking
Topic: multiple radius servers?
Replies: 1
Views: 1338

Re: multiple radius servers?

2.9.50 I have setup some virtual APs each with their own hotspot setup. Is there a Mikrotik way to set each hotspot to use it's own radius server? (So service providers can share the same hardware and spectrum?) I have it working with one radius server for the first hotspot, haven't tried doing som...
by Diganet
Wed Jan 23, 2008 3:44 pm
Forum: Wireless Networking
Topic: 3.0 not 5GHz happy
Replies: 5
Views: 1717

Re: 3.0 not 5GHz happy

After upgrading all (14) my APs to 3.0, especially my 5GHz APs are bad. I have one where only 4 clients are connected to, all RB133C and with 2.9.50 it was running 100%, 15+Mbps full duplex. After upgrade to 3.0(RB532A/R52H on AP) the clients were so bad, I couldn't even log into some, or disconnec...
by Diganet
Sun Jan 20, 2008 12:51 pm
Forum: RouterBOARD hardware
Topic: rb600 rebooting in bandwith test
Replies: 1
Views: 1518

Re: rb600 rebooting in bandwith test

my first test test dual-nstreme with RB600 PC---[lan]----RB600-1 ...........[nstreme-dual].............RB600-2 -set only nstreme-dual on 2 CM9 cards(2 in each of RB) -LAN a NSTREME interface in bridge -tested in office 20m between units -MT v.3.0 -power supply: 30W MT 48V If I run bandwidth test on...
by Diganet
Wed Jan 16, 2008 12:55 pm
Forum: General
Topic: VLAN switch problem
Replies: 3
Views: 3014

Re: VLAN switch problem

I have a routeros with 2 lan ports: users and internet gateways. I'd like to have more ports to monitor and control all internet gateways independently. I have a SMC 8024L2 VLAN switch and I try to set it up like this, but it seems not to work: - Gateways go on untagged vlan ports (vlan2, vlan3, vl...
by Diganet
Sun Jan 13, 2008 2:51 am
Forum: Wireless Networking
Topic: asymmetric singal strength with R52?
Replies: 3
Views: 1370

Re: asymmetric singal strength with R52?

Has anyone any experience with the following setup? A point to point connection between two R52 using one 5.4GHz channel. The catch is that the receiving antennas on both ends have a gain of ca. 35 dBi while the sending antennas only have a gain of about 8 dBi. Do the cards and RouterOS drivers sup...
by Diganet
Sun Jan 13, 2008 2:41 am
Forum: RouterBOARD hardware
Topic: R52H - RB333 and TxPower settings
Replies: 6
Views: 6614

Re: R52H - RB333 and TxPower settings

Thank you Henrik, I believe to have understood really well (now) how to use this parameter. Just the last doubt, the "burning" should not be happen if I set the antenna gain parameter (for example to 10dBi) , because of the TxPower trasmitted on the miniPCI should be the differences betwe...
by Diganet
Fri Jan 11, 2008 3:29 pm
Forum: RouterBOARD hardware
Topic: R52H - RB333 and TxPower settings
Replies: 6
Views: 6614

Re: R52H - RB333 and TxPower settings

Hi everyone, I set a RB333 with a R52H miniPCI card inserted. After initial settings all was working well, than I tried to optimize the Wireless LAN parameters to understand well what was happening changing them. After I changed the Tx-power parameters from "Tx-power Mode = card rates, TxPower...
by Diganet
Thu Jan 10, 2008 3:43 pm
Forum: RouterBOARD hardware
Topic: "Could not set MTU"
Replies: 5
Views: 5783

Re: "Could not set MTU"

Heey, just got info that it will come in RC15 :-)

/Henrik
by Diganet
Thu Jan 10, 2008 12:33 pm
Forum: RouterBOARD hardware
Topic: "Could not set MTU"
Replies: 5
Views: 5783

Re: "Could not set MTU"

Each of the boards have different ethernet interfaces so - there are different drivers. I think Mikrotik uses manufacturer drivers - they don't write them. So my point is - this driver doesn't support MTU bigger than 1500 Why do you need bigger MTU? Why not just reduce MTU on the VLAn interface? Be...
by Diganet
Thu Jan 10, 2008 11:25 am
Forum: RouterBOARD hardware
Topic: "Could not set MTU"
Replies: 5
Views: 5783

Re: "Could not set MTU"

At least für EoIP interfaces this is a confirmed bug which is said to be fixed in "the next release"...
Have a bad feeling that the switch chipset on 333 is too cheap to do this. On RB600 with same RoS you CAN set MTU bigger than 1500..

/Henrik
by Diganet
Wed Jan 09, 2008 1:35 pm
Forum: RouterBOARD hardware
Topic: "Could not set MTU"
Replies: 5
Views: 5783

"Could not set MTU"

Hi guys, Having a funny issue with a RB333 and RC13. Whenever i am trying to set MTU=1504 on this one i get an error "Could not set MTU".. Why? I need to set MTU for VLANs. This goes for Ethernet Ports. Have tried on configured board, blank conf etc. Have 532A same RC13 that can do this. /...
by Diganet
Tue Jan 08, 2008 12:56 am
Forum: RouterBOARD hardware
Topic: RB532 mystery UDP Packets
Replies: 10
Views: 2321

Re: RB532 mystery UDP Packets

There's not much here in this test network. Just a few Windows machines in a Peer2Peer, 1 8 port 10/100 unmanaged switch, 1 linux web server, 1 Dlink Router with wireless running DHCP. The RB532 will do this even when nothing else is plugged in to the switch. The amber traffic light just blinks awa...
by Diganet
Mon Jan 07, 2008 6:14 pm
Forum: RouterBOARD hardware
Topic: rb532 2.9.50 rebooting daily
Replies: 4
Views: 1636

Re: rb532 2.9.50 rebooting daily

Hello, I have a routerboard 532 that is rebooting at least once a day. Its random, but consistent. The device is one end of a wireless bridge. It has an ubiquity sr5 card in it, its on a ups in a secure location with the same configuration that all of my other bridges have. The log doesn't show any...
by Diganet
Thu Dec 27, 2007 3:16 pm
Forum: General
Topic: Feature request: Per VLAN MAC
Replies: 17
Views: 10990

Re: Feature request: Per VLAN MAC

It's useful if layer 2 switches are inserted between VLANS, in a ring topology. With the same MAC adress such a ring will not work at all, since the address table in the switches could not reach a stable state. I don't understand why you are comparing switch-features with RouterOS ? This have no me...
by Diganet
Thu Dec 20, 2007 2:24 pm
Forum: General
Topic: Feature request: Per VLAN MAC
Replies: 17
Views: 10990

Re: Feature request: Per VLAN MAC

It's useful if layer 2 switches are inserted between VLANS, in a ring topology. With the same MAC adress such a ring will not work at all, since the address table in the switches could not reach a stable state. I don't understand why you are comparing switch-features with RouterOS ? This have no me...
by Diganet
Wed Dec 19, 2007 5:52 pm
Forum: General
Topic: Firewall and fragmented packets - (long)
Replies: 3
Views: 2242

Re: Firewall and fragmented packets - (long)

Hi, For some time I know that the RouterOS is not able to handle fragmented packets when connection traffic is disabled and any firewall rule used. We have several thousands of MT boxes installed and now it looks we need to solve the problem definitively. When we created the scripts to configure ea...
by Diganet
Wed Dec 19, 2007 2:22 pm
Forum: General
Topic: Feature request: Per VLAN MAC
Replies: 17
Views: 10990

Re: Feature request: Per VLAN MAC

This is a feature ofen used by companies who have very strict mac-address control on their VLAN switched networks that automatically assigns VLANID based on a clients MAC-Address. However i guess this is some dude comparing the feature list with some vendors L3 switch instead of focusing on what Ro...
by Diganet
Wed Dec 19, 2007 1:53 pm
Forum: General
Topic: Feature request: Per VLAN MAC
Replies: 17
Views: 10990

Re: Feature request: Per VLAN MAC

Why? IMHO there are no need for that... at least in all VLAN configuration that I can imagine This is a feature ofen used by companies who have very strict mac-address control on their VLAN switched networks that automatically assigns VLANID based on a clients MAC-Address. However i guess this is s...
by Diganet
Thu Dec 13, 2007 2:02 pm
Forum: General
Topic: RC13 wierd Nstreme2 performance
Replies: 6
Views: 2585

Re: RC13 wierd Nstreme2 performance

RC13 works much better with dual nstreme than 2.9.50

We tested it today on the same range and with the same equipment.
Can you please post your interface configuration?

regards

Henrik
by Diganet
Wed Dec 12, 2007 3:53 pm
Forum: General
Topic: RC13 wierd Nstreme2 performance
Replies: 6
Views: 2585

Re: RC13 wierd Nstreme2 performance

Was it working fine in older versions? What frequencies are you using? What is your nstreme configuration? Also, are you using Nstreme1 when you get 60FD with two single links? Whow lots of questions :) 1. Have never been stable on V3 here 2. Using 5GHz Turbo on 5210 / 5760 GHz (r52) 3. Standard se...
by Diganet
Wed Dec 12, 2007 3:22 pm
Forum: General
Topic: RC13 wierd Nstreme2 performance
Replies: 6
Views: 2585

RC13 wierd Nstreme2 performance

Hi there, Have done some lab testing on RC13 and RB333... Nstreme2 is not really working, it's never stable and jumps up and down in bw tests. Max result i get is around 20Mbit FD. If i however use the same 2 radios and create 2 seperate WDS links (same boxes with swivel) and do bw tests i get aroun...
by Diganet
Wed Dec 12, 2007 12:38 pm
Forum: General
Topic: Backup feature req
Replies: 0
Views: 1107

Backup feature req

Hi, Could use a tool to make a _complete_ backup of a unit including settings for interfaces like MAC address, naming etc AND RouterOS. Replacing a dead unit takes too long time. I need to make this so simple that any of my customers can replace their units and configs without being RoS experts. Thi...
by Diganet
Tue Nov 20, 2007 9:39 pm
Forum: Wireless Networking
Topic: Received WEP Errors
Replies: 8
Views: 1898

Re: Received WEP Errors

Diganet, I do not think the RouterOS has anything to do with this problem. Its all about my access point. I am using RouterOS 2.9.27 on Pentium 4 processor, and my AP is wireless interactive..I am using 802.11b frequencies. Atheer Atheer, This forum is for RouterOS/Routerboard related stuff. /Henrik
by Diganet
Fri Nov 16, 2007 10:05 pm
Forum: Wireless Networking
Topic: Deauth bringing performance down on AP's
Replies: 6
Views: 1540

Re: Deauth bringing performance down on AP's

That's the funny part and what leads me to believe it's a DoS attack, they do not connect at all, just keep hammering. i think it's maybe a wep bruteforce. This is a 80 meter high location with 4 Sectors and i see the same on another sector, all sectors runs multiple SSIDs and the attacks are on spe...
by Diganet
Fri Nov 16, 2007 9:19 pm
Forum: Wireless Networking
Topic: Deauth bringing performance down on AP's
Replies: 6
Views: 1540

Re: Deauth bringing performance down on AP's

My guess would be that you've got non-customers who haven't configured their computers to attach to a specific SSID, so they're trying to attach to the strongest signal they hear, which is you. There aren't many ways to fix that, if the owners of those computers won't fix their config. You could al...
by Diganet
Fri Nov 16, 2007 8:49 pm
Forum: Wireless Networking
Topic: Deauth bringing performance down on AP's
Replies: 6
Views: 1540

Re: Deauth bringing performance down on AP's

Well.. We know our customers MAC addresses because we provide the equiptment and this is not any of ours. Also the behavior, we have tried to change MAC adresse, Hide SSID, change channels.. They just keep hammering. Is there any way to make the radio ignore the death packages? http://www.diganet.dk...
by Diganet
Fri Nov 16, 2007 3:56 pm
Forum: Wireless Networking
Topic: Deauth bringing performance down on AP's
Replies: 6
Views: 1540

Deauth bringing performance down on AP's

Hi all,

We are seeing some issues on our AP's where we have a lot of deauths. Performance on these are really bad and we see pings up to 5000ms. It seems like everytime we have deauths in the log, AP's performance degrades dramaticly. Is there any way around this?

/Henrik
by Diganet
Tue Nov 13, 2007 1:19 pm
Forum: General
Topic: RouterOS not routing IP fragments without conntrack!
Replies: 9
Views: 4487

Re: RouterOS not routing IP fragments without conntrack!

I work with Quake II code quite a bit, and master server communications are done in UDP with packets often exceeding MTU. In addition my Q2 client, R1Q2, supports fragmentation to allow greater amounts of data to be sent at once. Granted, for most people, IP fragments are probably not an issue, but...
by Diganet
Tue Nov 13, 2007 12:34 pm
Forum: Wireless Networking
Topic: Received WEP Errors
Replies: 8
Views: 1898

Re: Received WEP Errors

Would like to see your RouterOS configuration, also know what board and radio you are using.

unicast packets is host to host communication, multicast is broadcast packets.

/Henrik
by Diganet
Tue Nov 13, 2007 12:09 am
Forum: General
Topic: RouterOS not routing IP fragments without conntrack!
Replies: 9
Views: 4487

Re: RouterOS not routing IP fragments without conntrack!

Most packets are sent DF (don't fragment) so you will rarely see this as a problem in day to day operations, but some UDP applications send > MTU packets and rely on fragmentation for correct transmission. After installing a RouterOS system as my gateway, I found that several applications that used...
by Diganet
Sun Nov 11, 2007 10:37 pm
Forum: Wireless Networking
Topic: Received WEP Errors
Replies: 8
Views: 1898

Re: Received WEP Errors

Diganet, here is a snapshot of what AP is reporting: === System Statistics === [Ethernet Receive ] Packets :552817 Total Bytes :507625519 [Ethernet Transmit] Packets :466720 Total Bytes :47383899 [Wireless Receive ] Fragments : 569348 Unicast Packets : 551954 Unicast Bytes : 58609758 Multicast Pack...
by Diganet
Sat Nov 10, 2007 5:01 pm
Forum: Wireless Networking
Topic: Received WEP Errors
Replies: 8
Views: 1898

Re: Received WEP Errors

Guys,

My Access Point is reporting a noticible WEP errors (Packets that have WEP encryption errors) although I did not enable this feature!? I have disabled the WEP encryption in my AP-so why I am receiving this error?

Atheer
Show os some log of it

/Henrik
by Diganet
Mon Nov 05, 2007 4:21 pm
Forum: Beginner Basics
Topic: Im being scanned-Help!!!
Replies: 2
Views: 1494

Re: Im being scanned-Help!!!

i am new here this is my first thread i hope it is in the right place. i am using Mikrotik 2.9.6 for my ISP but lately there is someone in my area who;s scanning my clients MAC and and using their static IPs, is there any one who has any idea what should i do. thanks Use WPA2 encryption, Set ARP to...
by Diganet
Sun Nov 04, 2007 4:26 pm
Forum: General
Topic: How to restrict LAN IP addresses by MAC binding ?
Replies: 3
Views: 2032

Re: How to restrict LAN IP addresses by MAC binding ?

Dear Henrik Can you please write here your command what you suggested me to do ? I am waiting for your answer. Best Regards, Moshiur Terminal vt102 detected, using multiline input mode [admin@MikroTik] > ip arp [admin@MikroTik] ip arp> add disable enable find print set comment edit export get remov...
by Diganet
Fri Nov 02, 2007 1:11 pm
Forum: General
Topic: Mikrotik, servers and failover
Replies: 15
Views: 2784

Re: Mikrotik, servers and failover

Thanks for this - but unfortunately we have a number of VLANS. The VRRP as implimented in MT says it does not support VLANS. Is there a work around for this? Cheers, Bill All it says is that you can't run VRRP on a VLAN interface, however you could run it on normal interfaces like dedicating a NIC ...
by Diganet
Thu Nov 01, 2007 10:59 pm
Forum: General
Topic: How to restrict LAN IP addresses by MAC binding ?
Replies: 3
Views: 2032

Re: How to restrict LAN IP addresses by MAC binding ?

1. At LAN, I want to restrict each IP addresses by MAC binding so that client end Internet traffic doesn't support by changing any other client IP . 2. Suppose I have total Bandwidth 2MB at LAN interface(171.16.1.1/25) and I want to distribute each client MAX as 128kbps ( Not more) for Internet acc...
by Diganet
Thu Nov 01, 2007 8:21 pm
Forum: General
Topic: RC9 - bridge in nstreme2 dosn't work
Replies: 12
Views: 3917

Re: RC9 - bridge in nstreme2 dosn't work

What is your configuration on RB333, please make the support output file when the ethernet port stops responding. What throughput (speed and packets per second) you see through this board? RB333: MT - 3.0RC9 3 x AR5413 (but only one is active) all ports eth and wlan are in bridge connection trackin...
by Diganet
Tue Oct 30, 2007 10:47 pm
Forum: Scripting
Topic: Here's a challenge
Replies: 4
Views: 1431

Re: Here's a challenge

You could connect another radio with an omni (or sectored) to monitor with.

You could leave this on all the time if you wanted to...
This is an omni (repeater site) that serves a few clients. Normally everything is connected via a 5GHz backhaul but this.

/Henrik
by Diganet
Tue Oct 30, 2007 3:08 pm
Forum: General
Topic: RC9 - bridge in nstreme2 dosn't work
Replies: 12
Views: 3917

Re: RC9 - bridge in nstreme2 dosn't work

Hello, I can't run bridge on working connection nstreme-dual. Nstreme2 is working: --- [admin@MikroTik] /interface wireless nstreme-dual> monitor 0 rx-signal-strength: -60dBm tx-signal-strength: -65dBm rx-rate: "48Mbps" tx-rate: "54Mbps" connected: yes (..) --- Bridge is working...
by Diganet
Fri Oct 26, 2007 2:11 am
Forum: Scripting
Topic: Here's a challenge
Replies: 4
Views: 1431

Here's a challenge

Hi guys, I would like a ROS V3 script that is capable of doing a wireless scan on a particular interface for a given period of time, end the scan and put the result to a file.. This is needed because of some WDS links we have running have no ethernet and doing a scan on the same interface disconnect...
by Diganet
Fri Oct 26, 2007 12:59 am
Forum: RouterBOARD hardware
Topic: Redirect to webpage for selected customers
Replies: 1
Views: 1259

Re: Redirect to webpage for selected customers

Hi Do anyone have a good idea how to redirect all www (port 80) request from a selected customer to a fixed webpage. Can be used as a "you have not paid yet" page, and at the same time internet not work for that customer. I use simple queues for each customer. Kim Kim, Just do a dest nat ...
by Diganet
Mon Oct 08, 2007 12:03 am
Forum: Wireless Networking
Topic: rb532a with sr2 problem URGENT!!
Replies: 17
Views: 2416

Re: rb532a with sr2 problem URGENT!!

It seems that I have one mistake :lol: , Ihave to bridge it , I thought it saved my old settings if *** , anyway Thank you Guys .. But I can see it only can broadcast on 2.4 ghz , better performance , Thanks Regards, Ghassan Gharabli Ghassan, We have stopped using the SR2 after several failures. It...
by Diganet
Tue Oct 02, 2007 2:55 pm
Forum: General
Topic: [solved] some interfaces in one IP segment
Replies: 6
Views: 1947

Re: some interfaces in one IP segment

/ interface vlan add name="v16" mtu=1500 arp=proxy-arp vlan-id=16 interface=eth1 disabled=no add name="vlan1049" mtu=1500 arp=proxy-arp vlan-id=1049 interface=eth1 disabled=no / ip address add address=192.168.0.250/24 network=192.168.0.0 broadcast=192.168.0.255 interface=eth1 di...
by Diganet
Tue Oct 02, 2007 1:49 pm
Forum: General
Topic: RC4 multicast package??
Replies: 13
Views: 3932

Re: RC4 multicast package??

Ok let imagine for 1 moment that RC5 is out and we have working multicast package. Can someone give me some suggestions or links - how can I, without investing any money, check this feature out. And I am not talking about some multicast traffic generators - I am talking about real usable stuff This...
by Diganet
Wed Sep 05, 2007 3:50 pm
Forum: RouterBOARD hardware
Topic: RB333 PtP throughput
Replies: 13
Views: 4465

Re: RB333 PtP throughput

Well RC4 is out. Anyone got 80mb FD ;) Ehh. Nope.. Dont know if it have to do with using the swivel antennas (maybe antennas too close to each others) but i cannot get it working properly. I have good signal (30-40dBm), using brand new R52 radios and antennas mounted in another cabinet from RB532 a...
by Diganet
Thu Aug 30, 2007 3:06 pm
Forum: RouterBOARD hardware
Topic: RB333 PtP throughput
Replies: 13
Views: 4465

Re: RB333 PtP throughput

Anyone test the throughput of an RB333 in PtP link configuration? What's the max throughput that you are seeing? I'm specificially interested in the 5.3/5.8 bands. I have done +70Mbit UDP one way on 5GHz turbo, Nstreme, normal AP->Station WDS setup. Cannot get Nstreme Dual working properly in indoo...
by Diganet
Wed Aug 29, 2007 12:30 pm
Forum: Wireless Networking
Topic: cold spare AP system without radios
Replies: 2
Views: 983

Re: cold spare AP system without radios

All, I have multiple APs that I would like to have a 'cold spare' available. For example I have a RB133 with 2 radios, and another in service with 3 radios. I would like to have a spare 133 board and configuration and extra radios on hand so a tech could replace a system in my absence. The problem ...
by Diganet
Wed Aug 29, 2007 12:23 pm
Forum: RouterBOARD hardware
Topic: RB333 PtP throughput
Replies: 13
Views: 4465

Re: RB333 PtP throughput

Anyone test the throughput of an RB333 in PtP link configuration? What's the max throughput that you are seeing? I'm specificially interested in the 5.3/5.8 bands. I have done +70Mbit UDP one way on 5GHz turbo, Nstreme, normal AP->Station WDS setup. Cannot get Nstreme Dual working properly in indoo...
by Diganet
Tue Aug 28, 2007 2:46 pm
Forum: General
Topic: what to do when found infected user?
Replies: 10
Views: 2120

Re: what to do when found infected user?

We give them a urgent message to disconnect the problem computer from the network and have it fixed, or we will disconnect them. If they don't act, we temporarily suspend their service until the problem can be fixed. I think this is the most logical solution. Two things you accomplish - solve your ...
by Diganet
Thu Aug 16, 2007 11:25 pm
Forum: RouterBOARD hardware
Topic: RB192 and RB333
Replies: 67
Views: 15457

Re: RB192 and RB333

why not?
Got indoor enclosures for my 333's. Holes for 3 N-connectors in the back, but if i mount more than 1 R52 there isn't room for more than 1 pigtale.. It's like 4-5cm too short. Also i cannot mount more than 2 MiniPCI cards in this enclosure.

/Henrik
by Diganet
Thu Aug 16, 2007 3:03 pm
Forum: RouterBOARD hardware
Topic: RB192 and RB333
Replies: 67
Views: 15457

Re: RB192 and RB333

As I said above, one R52 in the middle will work fine.
Not in the MT enclosure 8)

/Henrik
by Diganet
Thu Aug 16, 2007 11:51 am
Forum: RouterBOARD hardware
Topic: RB333 Performance tests, Dual Nstream, Nstream, etc
Replies: 3
Views: 3620

Re: RB333 Performance tests, Dual Nstream, Nstream, etc

Has anyone had a chance to do any performance testing on the RB333's? Whenever I would 5ghz with 5ghz or 2ghz with 2ghz I would get horrible speeds, but I'm pretty sure that was b/c I was testing in a metal warehouse with too large of antenna's.. Not to mention several wireless backhauls on a tower...
by Diganet
Thu Aug 09, 2007 12:41 pm
Forum: Wireless Networking
Topic: Performance issue routing thru a RB500
Replies: 3
Views: 1142

Re: Performance issue routing thru a RB500

Hi, I've a strange effect. Routing to and from a RB500 via wireless give 10-12MBit (limited by bandwith tool maxing out the RB500 CPUs). Routing thru gives only half (5-6MBit). 5GHz Frequencies are separated by 200Mhz. No turbo mode. No queues. Looking at the RB500 shows only 50% CPU. This ap hangs...
by Diganet
Tue Aug 07, 2007 11:56 pm
Forum: RouterBOARD hardware
Topic: RB192 and RB333
Replies: 67
Views: 15457

Re: RB192 and RB333

i'd say RB333 was worth waiting ;) edit, if talking about its speed Janisk, I am awaiting my first badge of 333's and i am of course very excited about the product after what i have read here and heard at the MUM's.. Now, i am a very impatient guy with lots of questions from my customers, so can yo...
by Diganet
Wed Jul 11, 2007 9:19 pm
Forum: Wireless Networking
Topic: To double data transfer rate with a couple of R52
Replies: 26
Views: 4637

Re: To double data transfer rate with a couple of R52

so, it's ain't easy... use rb112 with r52. you can put two cards in dual nstreme. perfect... we have try and resieve nice result. but as far as 50km we have never try r52. at these distances we use sr5 and xr5 only. just one of these cards can work in an rb112, therefore you can try with 2xr52 in a...
by Diganet
Wed Jul 11, 2007 1:58 pm
Forum: Wireless Networking
Topic: To double data transfer rate with a couple of R52
Replies: 26
Views: 4637

Re: To double data transfer rate with a couple of R52

so, it's ain't easy... use rb112 with r52. you can put two cards in dual nstreme. perfect... we have try and resieve nice result. but as far as 50km we have never try r52. at these distances we use sr5 and xr5 only. just one of these cards can work in an rb112, therefore you can try with 2xr52 in a...
by Diganet
Tue Jul 10, 2007 11:21 am
Forum: RouterBOARD hardware
Topic: Q2 over in 3 days
Replies: 8
Views: 2801

Re: Q2 over in 3 days

In that video they do explicitly say that it's an ESTIMATE not a commitment!
Well they didn't say which year did they? :D Take it easy and stop wasting your life going through all videos too gather evidence.. You cannot push anything anyway...

/Henrik
by Diganet
Tue Jul 10, 2007 1:20 am
Forum: Wireless Networking
Topic: How to quick see LOS conditions
Replies: 5
Views: 1264

Re: How to quick see LOS conditions

Nice, but i need some files like files/coverage_062107.png ;) Give me the gps coordinates of one of your towers, tower height, what frequency you are using, what radio you use on the ap and client, what antenna you are using (model, gain), and uhmm what client antenna you normally use and I'll see ...
by Diganet
Tue Jul 10, 2007 12:10 am
Forum: Wireless Networking
Topic: How to quick see LOS conditions
Replies: 5
Views: 1264

Re: How to quick see LOS conditions

Radio Mobile is awesome. you can get radio mobile here: http://www.cplus.org/rmw/english1.html I made .ant files for a bunch of the pac wireless antenna's here: http://www.shelbywireless.com/radiomobile/ I export my maps created with radio mobile into google earth so customers can zoom onto their l...
by Diganet
Mon Jul 09, 2007 2:37 pm
Forum: Wireless Networking
Topic: How to quick see LOS conditions
Replies: 5
Views: 1264

How to quick see LOS conditions

Hey all. I just tried the new version of Google Earth. I am right now capable of checking LOS conditions on Google Earth by going 3D and elevate down and view in the right direction. If you have drawn a line (measured) between 2 points you are able to get a quick idea about LOS conditions. This is a...
by Diganet
Mon Jul 09, 2007 2:30 pm
Forum: Wireless Networking
Topic: Vlan untagged on ethernet port, CPE
Replies: 14
Views: 3567

Re: Vlan untagged on ethernet port, CPE

How do one attach ETH1 to bridge Untagged?
I can`t find any options for this in winbox....
Just attach the port to the bridge without giving it a tag.

/Henrik
by Diganet
Mon Jul 09, 2007 12:57 pm
Forum: General
Topic: BETA Testing and Feature Suggestions for next routeros
Replies: 328
Views: 96089

Re:

we already support protocol IGMP for IP Multicast (compliance with RFC 2236) Support IP Multicast with use Protocol Independent Multicast (PIM) and Sparse and Dense Mode (compliance with RFC 2362, 3973) are being developed. Is there any news on this matter? I really really really really really real...
by Diganet
Sat Jul 07, 2007 4:59 pm
Forum: Wireless Networking
Topic: Vlan untagged on ethernet port, CPE
Replies: 14
Views: 3567

Re: Vlan untagged on ethernet port, CPE

Thanks again Diganet for replying. I`m not asking for the whole setup. It`s the VLAN setup via winbox I don`t get and would like some instructions for. There fore I made the drawing, so that you could see what cind of VLAN setup I was attempting. Okay.. You could try this: Put all the VLANS on the ...
by Diganet
Sat Jul 07, 2007 4:52 pm
Forum: Wireless Networking
Topic: To double data transfer rate with a couple of R52
Replies: 26
Views: 4637

Re: To double data transfer rate with a couple of R52

Nope, RB133C only have one MiniPCI slot. Also you should go for RB532A if you want more than 15-20Mbit UDP on the board. /Henrik You're right... I fixed the error. What can you say to me about RB133 when is used in a scenario like above? i wuld use PC, not routerboard. P43GHz+/256/CF is a good conf...
by Diganet
Fri Jul 06, 2007 10:59 pm
Forum: Wireless Networking
Topic: Vlan untagged on ethernet port, CPE
Replies: 14
Views: 3567

Re: Vlan untagged on ethernet port, CPE

Can anybody help with this setup, I need some winbox instructions :shock: He he Or is it not possible? I use this kind of setup with my Alvarion equipment. It is possible, but you're asking for a full configuration that a lot of people normally charges money for. Read the Manual, do some learning, ...
by Diganet
Fri Jul 06, 2007 10:57 pm
Forum: Wireless Networking
Topic: To double data transfer rate with a couple of R52
Replies: 26
Views: 4637

Re: To double data transfer rate with a couple of R52

it's not so easy to say... 2 cards = 2X20Mbit. but the result is ubiquitious... simmetric channel with more bandwidth. once you try you can see. regards, C. G. I would want to know if the RB133C is really able to sustain about 40 Mbps in a point-to-point wireless system like this: PC | RB133C, two ...
by Diganet
Wed Jul 04, 2007 11:01 pm
Forum: Wireless Networking
Topic: RB133C and R52: 5 GHz, real data transfer rate
Replies: 1
Views: 1034

Re: RB133C and R52: what performances (real data transfer rate)?

Hello again, if I considerd the following scenario: LAN | Wireless bridge (RB133C, R52, bridge mode, nstreme disabled, routing disabled) /\/ 5 GHz, distance: 2 Km (LOS), Fresnel zone free of obstructions /\/ Wireless bridge (RB133C, R52, bridge mode, nstreme disabled, routing disabled) | LAN What t...
by Diganet
Wed Jul 04, 2007 10:57 pm
Forum: General
Topic: Feature request - Traffic graphing on winbox, fixed scale.
Replies: 1
Views: 1457

Re: Feature request - Traffic graphing on winbox, fixed scale.

Hello everybody. I just wanted to say that would be great to have Online graphs (on winbox) with fixed scale. Very usefull for people with different interfaces with different bandwidths.... and to put a red line on a fixed place of the graph, showing the "Roof" of that connection. So we c...
by Diganet
Wed Jul 04, 2007 10:55 pm
Forum: General
Topic: 3.0beta10 is out
Replies: 23
Views: 6188

Re: 3.0beta10 is out

Installed it on 532 ap! I saw sporadic jumping to 100%cpu with just 2 clients. And on this ap with 1mbps aggregate traffic i have some sporadic icmp ping losing on ethernet. On another ap with few kbps I don't see any loss. Regards Ros I see the same. RB532A 266MHz. Sporadic jumps to 100%. If i pus...
by Diganet
Tue Jul 03, 2007 8:30 pm
Forum: Wireless Networking
Topic: Vlan untagged on ethernet port, CPE
Replies: 14
Views: 3567

Re: Vlan untagged on ethernet port, CPE


Can you please come with a detailed configuration example?

Sorry, I really can`t figure out how to do this :(
Can you please come with a detailed drawing of what you exactly want?

/Henrik
by Diganet
Mon Jul 02, 2007 12:50 pm
Forum: Wireless Networking
Topic: WDS disconnect /connect Problem
Replies: 14
Views: 3070

Re: WDS disconnect /connect Problem

The problem is not SNR related. As has been mentioned, just having a client associate causes the problem. The more clients connected, the longer the timeout or high ping times. We are seeing up to 20 seconds and longer where the radios can't be pings. Another frustrating problem is that if you have...
by Diganet
Mon Jul 02, 2007 12:47 pm
Forum: Wireless Networking
Topic: VOIP limits
Replies: 22
Views: 4991

Re: VOIP limits

Ok, this is R52 limitations, or all compatible radio cards? This is radios in general i think. You have a certain limit within the 802.x protocols. This is why Nstreme is so handy. SIP is always a problem because of the small packets and unless you have some wireless gear that can do small packets ...
by Diganet
Mon Jul 02, 2007 2:31 am
Forum: RouterBOARD hardware
Topic: Q2 over in 3 days
Replies: 8
Views: 2801

Re: Q2 over in 3 days

I see no rb 333 at any distributer I have purchased from in the past. ROS v.3 is still beta. No announcement to exact speed or processor has been posted. Q2 is over. Better to get a working product than a product that has been pushed out too soon because MT had to live up to a roadmap.. I think a m...
by Diganet
Mon Jul 02, 2007 2:27 am
Forum: Wireless Networking
Topic: WDS disconnect /connect Problem
Replies: 14
Views: 3070

Re: WDS disconnect /connect Problem

We see the same problem. Mikrotik told us to turn on RSTP but that didn't help either. We still have an open ticket on it.
I see the same problem whenever a WDS is joining. I get 4-5 seconds of very high pings on that particular radio (SR5).

/Henrik
by Diganet
Mon Jul 02, 2007 2:24 am
Forum: Wireless Networking
Topic: VOIP limits
Replies: 22
Views: 4991

Re: VOIP limits

Ok, so using RB532 as P2P WDS transparent bridge, you can only push 8000pps? Any better board for P2P use? It's not the board but the Radio. You should use Nstreme for P2P links, this will make PPS much better by putting small packets into bigger wireless frames but will also cause jitter if traffi...
by Diganet
Sat Jun 30, 2007 12:32 am
Forum: Wireless Networking
Topic: VOIP limits
Replies: 22
Views: 4991

Re: VOIP limits

He is saying mutch more, witch is right?
http://forum.mikrotik.com/viewtopic.php ... &hilit=pps
Both are right. It all depends on which interfaces we are talking about

/Henrik
by Diganet
Fri Jun 29, 2007 12:36 pm
Forum: Wireless Networking
Topic: Vlan untagged on ethernet port, CPE
Replies: 14
Views: 3567

Re: Vlan untagged on ethernet port, CPE

But let`s say that the uplink to the AP carries 10 VLANs (no one is untagged), for different services, companies etc. Then I hock up a client to this AP, the service that the client is supposed to have is on VLAN 13. To the RIC/522s ethernet port he want`s to connect his PC to use the service, then...
by Diganet
Thu Jun 28, 2007 4:33 pm
Forum: Wireless Networking
Topic: Vlan untagged on ethernet port, CPE
Replies: 14
Views: 3567

Re: Vlan untagged on ethernet port, CPE

Thank you for answering. But I am afraid I`m going to need more help. I can`t seem to get VLANs untagged at the ethernet port. I created a bridge and added the VLAN with correct ID under it, but how do I untagg it for the ethernet port? The links carry a trunk, and the clients equipment don`t suppo...
by Diganet
Wed Jun 27, 2007 10:47 pm
Forum: Wireless Networking
Topic: Problem with bandwidth over 3-4 hops
Replies: 22
Views: 4297

Re: Problem with bandwidth over 3-4 hops

Oh ok - turbo UDP I can believe...
Actually testet it today for fun. I pushed 55Mbit UDP one way and 31/31 Both ways doing bwtest from the routerboard itself. My Vista could for some reason not make more than 28Mbit :?

/Henrik
by Diganet
Wed Jun 27, 2007 11:16 am
Forum: Beginner Basics
Topic: Setting up a Static Route on the Same Subnet
Replies: 9
Views: 5068

Re: Setting up a Static Route on the Same Subnet

One thing I noticed while watching traffic is that the PoS machine in question (.11) doesn't try to communicate directly with the file server at its address (.10). It sends out broadcast traffic (to 192.168.1.255). Is there something in the Mikrotik stopping the broadcast traffic from going to the ...
by Diganet
Tue Jun 26, 2007 11:51 pm
Forum: Wireless Networking
Topic: Problem with bandwidth over 3-4 hops
Replies: 22
Views: 4297

Re: Problem with bandwidth over 3-4 hops

How do you manage 40Mbps one way? Is that TCP? I don't think I got that with 2 RB532's connected by Ethernet... Best I could do with 2 x 1GHz boards (in lab) was 30Mbps TCP using Nstreme... No problem on 5G Turbo, disable conntrack. Nstreme disabled, takes up too much CPU on RB532A. Throughtput is ...
by Diganet
Tue Jun 26, 2007 11:34 pm
Forum: General
Topic: Mikrotik VIDEOS!
Replies: 35
Views: 8895

Re: Let's try something new ...

Consider this a Beta test of the new video site: http://www.tiktube.com/ all kinds of comments and suggestions welcome. Is it slow? Does it even work for you? Have a video to share? Normis, Very very nice. If you need some place with high bandwith to put your server for almost no fee i can provide....
by Diganet
Tue Jun 26, 2007 12:55 am
Forum: Wireless Networking
Topic: Problem with bandwidth over 3-4 hops
Replies: 22
Views: 4297

Re: Problem with bandwidth over 3-4 hops

8) That's pretty impressive - what signal strengths/channel width/CCQ do these links have, and what kind of distances between them? Have you compared your links' performance against a WDS system? Only difference Between WDS and not WDS is 6 bytes per frame, so this is not the bandwith killer. I mov...
by Diganet
Tue Jun 26, 2007 12:42 am
Forum: General
Topic: Two rb532, two modems... how to control connections?
Replies: 4
Views: 1352

Re: Two rb532, two modems... how to control connections?

First of all thank you for your reply :) I have already wrote a script that monitors the status of the link of the ethernet and controls (enable/disable) the wireless connection. But the problem is that there is a possibility the ethernet link to be ok and the connection between the two modems to b...
by Diganet
Mon Jun 25, 2007 12:42 pm
Forum: General
Topic: VLAN Routing Refresher
Replies: 2
Views: 1265

Re: VLAN Routing Refresher

Hi guys, Silly question, when routing between VLANs, does ALL traffic go through the router, or does it simply swap tags and let the switch do the rest? So for example I have a bunch of VLANs on a switch, a MT on a stick routing between them. A host on vlan20 wants to establish a connection to a ho...
by Diganet
Mon Jun 25, 2007 12:38 pm
Forum: General
Topic: Two rb532, two modems... how to control connections?
Replies: 4
Views: 1352

Re: Two rb532, two modems... how to control connections?

You would have to use routing and be able to assign IP adresses to the modems.. RouterOS can then monitor and change routes if link goes down.

/Henrik
by Diganet
Fri Jun 22, 2007 3:07 pm
Forum: Wireless Networking
Topic: Problem with bandwidth over 3-4 hops
Replies: 22
Views: 4297

Re: Problem with bandwidth over 3-4 hops

You are accumulating packetloss over the links. That is why you see so much drop in bandwith. You will have to make sure that the CCQ for every link is close to 100% if you want to move 10 Mbit over it. Also you should be able to move around 15 Mbit TCP between them at least.

/Henrik
by Diganet
Fri Jun 22, 2007 2:54 pm
Forum: Wireless Networking
Topic: WDS Mesh
Replies: 2
Views: 1177

Re: WDS Mesh

I was just wondering about this myself. I also wondered if bridged wds links are better than bridged ap-client in the two radio system. I prefer Station WDS (bridged client) IF nobody need to connect to the "slave" end. It gives me 2 things; No one connects to the station I can change cha...
by Diganet
Sun Jun 17, 2007 10:46 pm
Forum: Wireless Networking
Topic: Vlan untagged on ethernet port, CPE
Replies: 14
Views: 3567

Re: Vlan untagged on ethernet port, CPE

Hello I`m new to mikrotik. And I now have a test setup going with some RIC/522 clients and a MT base station. I can`t seem to find out how to untagg a vlan on the ethernet port on the CPE (so that the coustomer don`t get a truk, only the vlan he is supposed to be in). And how to put the bridge IP o...
by Diganet
Mon Jun 11, 2007 1:37 pm
Forum: General
Topic: URGENT - DHCP & Vista on a LAN
Replies: 5
Views: 2063

Re: URGENT - DHCP & Vista on a LAN

FYI... 09:59:40 dhcp,debug,packet DHCP - Office Users received discover with id 3532294747 from 0.0.0.0 09:59:40 dhcp,debug,packet flags = broadcast 09:59:40 dhcp,debug,packet ciaddr = 0.0.0.0 09:59:40 dhcp,debug,packet chaddr = 00:A0:D1:3A:81:A3 09:59:40 dhcp,debug,packet Msg-Type = discover 09:59...
by Diganet
Mon Jun 11, 2007 10:49 am
Forum: Wireless Networking
Topic: 802.1x capability
Replies: 3
Views: 1371

Re: 802.1x capability

I think the answer is NO. But i dont understand this is a PR or support forum?
You can use EAP as authentication for wireless clients..

/Henrik
by Diganet
Mon Jun 11, 2007 10:40 am
Forum: RouterBOARD hardware
Topic: Ethernet Failure on RB532
Replies: 8
Views: 2858

Re: Ethernet Failure on RB532

I have Ether 0 failures on two RB532 boards. The Ether 0 ports were being used for POE also. The boards are being powered by POE and work with the serial port but not the Ethernet 0. Power recycling and reseting the RB532's does not help. The link status appears as if the cable is unplugged. Any su...
by Diganet
Fri Jun 08, 2007 11:06 am
Forum: General
Topic: SIP in MT3.0
Replies: 4
Views: 2496

Re: SIP in MT3.0

sip helper good think for a nat router.
Try mt v3 in routing mode without Nat and sip helper enbaled...........you will see very nice things :))))))))
Why would anyone use a SIP helper if they are not using NAT?

/Henrik
by Diganet
Thu Jun 07, 2007 11:47 pm
Forum: Wireless Networking
Topic: RB133 as mobile client
Replies: 11
Views: 2464

Re: RB133 as mobile client

First of all you can put a DHCP client on the Wireless interface. Just make sure that the "add default route" box is ticked. However your routing won't work if you use a /24 net as WAN of the client and make smaller subnets in the same range on your LAN ports. You have to either make diffe...
by Diganet
Thu Jun 07, 2007 1:44 pm
Forum: Wireless Networking
Topic: RB133 as mobile client
Replies: 11
Views: 2464

Re: RB133 as mobile client

Ok thanks, I was missing the equal sign. It would apear that this configuration would be for a normal access point, but I am trying to use this as a mobile device, so shouldnt I configure the wireless port with Proxy ARP as that is the path to the network/internet? When you say mobile device, do yo...
by Diganet
Tue Jun 05, 2007 1:31 pm
Forum: Beginner Basics
Topic: All my clients computers show ip conflict
Replies: 7
Views: 3776

Re: All my clients computers show ip conflict

I'm having the same issue and yes, I am using proxy-arp
I have seen this behavior if you Proxy ARP a physical interface that belongs to a bridge.

/Henrik
by Diganet
Tue Jun 05, 2007 12:57 pm
Forum: Wireless Networking
Topic: RB133 as mobile client
Replies: 11
Views: 2464

Re: RB133 as mobile client

I am not sure if this will work, and as of yet have not found the commands to setup proxy arp in the 133. I have found examples of what it should look like when I am done, but have not found the commands yet. If you think that might work, can you point me to the command list? If you take Winbox and...
by Diganet
Sun Jun 03, 2007 5:21 pm
Forum: General
Topic: Packet loss problems
Replies: 8
Views: 1970

Re: Packet loss problems

Hi, I have 1 RB44 in my CORE ROS and the four have the same irq (#9) This is a problem. How can I change the irq for ether ports in the same nic RB44? Regards, Fran. You cant. Each PCI slot on the Motherboard holds 1 IRQ. Best performance comes from using one NIC per PCI slot. This is by design and...
by Diganet
Sat Jun 02, 2007 12:54 am
Forum: General
Topic: Mikrotik ARP Storm
Replies: 4
Views: 2866

Re: Mikrotik ARP Storm

Is there ANY way to limit ARP requests in MT?? Every so often I get slammed with my MT box doing thousands of ARP requests a second on my Public IP subnet. I'm assuming this is coming from the internet, but I can't find any way to limit or firewall this behaviour in Mikrotik. Basically I'm a sittin...
by Diganet
Sat Jun 02, 2007 12:40 am
Forum: Wireless Networking
Topic: RB133 as mobile client
Replies: 11
Views: 2464

Re: RB133 as mobile client

It is not practical to replace the AP; it is proprietary and provides outstanding functionality. I was hoping you were going to suggest a routing solution??? Well, you tell us that you're AP can't use WDS and you hope that Normis would suggest a routing solution.. !?.. I am a little bit confused he...
by Diganet
Thu May 31, 2007 1:27 pm
Forum: General
Topic: Anobody have a list of gameserver ports?
Replies: 3
Views: 1093

Re: Anobody have a list of gameserver ports?

i think it depends on the games your users are using Yes of course.. What i was looking for was maybe 20-30 popular ones like CS, Battlefield, WOW etc.. I can do this by digging, but i think this could be interesting for everyone to have because a lot of WISP customers do this and these people are ...
by Diganet
Thu May 31, 2007 2:36 am
Forum: General
Topic: Anobody have a list of gameserver ports?
Replies: 3
Views: 1093

Anobody have a list of gameserver ports?

Hi,

I would like to fine tune my traffic for my users and would like to up prioritize traffic to/from gameservers.

Anybody made some list or already mangling this kind of traffic that i can borrow? :-)

Would be higly appreciated

Regards

Henrik
by Diganet
Mon May 28, 2007 4:33 pm
Forum: RouterBOARD hardware
Topic: tune up link - rb133
Replies: 15
Views: 5477

Re:

document is real test under real conditions here in mikrotik, Uldis can post testing details when he reads this. bear in mind that this result will change once you use firewall, queues, nat, or do some kind of accounting/logging etc. for best results, disable connection tracking (if you don't use f...
by Diganet
Sun May 27, 2007 6:43 pm
Forum: Wireless Networking
Topic: need advice - dual CPU PIII machines to buy or not -ROS3.x
Replies: 9
Views: 2598

Re: need advice - dual CPU PIII machines to buy or not -ROS3.x

thank you guys for helping. Good idea is to use R14 card. Im using as many PCIs as I can because Im trying to minimize radio crosstalk between radio cards, and R14 is not the best solution to get rid of radio crosstalk, Im affraid. I just wondering if you have been running ROS2.9.x on dual PIII mac...
by Diganet
Sun May 27, 2007 1:46 pm
Forum: Wireless Networking
Topic: need advice - dual CPU PIII machines to buy or not -ROS3.x
Replies: 9
Views: 2598

Re: need advice - dual CPU PIII machines to buy or not -ROS3.x

The question is: Would you guys recommend me to buy this dualCPU machines and wait for ROS 3x (I have read somewhere in this forum there should be non beta public release within spring 07 so it could come really soon) or keep trying to get another suitable PCs? Im interested in PIII usage because t...
by Diganet
Mon May 21, 2007 10:16 am
Forum: General
Topic: Tool/sniffer causes 2.9.42 to hang..
Replies: 1
Views: 757

Tool/sniffer causes 2.9.42 to hang..

Hi, I am trying to set up Snort but i'm having issues when starting the sniffer stream from FW to Snort Box. We have a normal 4-8Mbit Throughput on firewall but when starting this stream i get a 70-80 Mbit traffic on the particular interface (inside) and this almost kills the FW. I cannot stop the s...
by Diganet
Sun May 20, 2007 5:06 pm
Forum: Wireless Networking
Topic: WDS Limited
Replies: 2
Views: 1408

Re: WDS Limited

Does anyone know how many AP's running WDS you can have connected to one RB532 With Router OS with one radio card ? The links are all AP's running WDS to the main AP only and no WDS between AP's Cheers Piri WDS creates latency, i suggest not to connect more than 8 WDS clients. Best regards Only dif...
by Diganet
Wed May 09, 2007 11:22 am
Forum: General
Topic: Change Route after certain time
Replies: 5
Views: 1569

Re: Change Route after certain time

Hi all I would like to accomplish the following. If anyone has idea's, please help! Due to bandwidth costs, and the fact that you can't split port 80 web traffic from port 80 download traffic (IE, loading web site from downloading 2GB file from website), I would like to accomplish this by changing ...
by Diganet
Wed May 09, 2007 12:27 am
Forum: General
Topic: SIP NAT Traversal and Mangle
Replies: 2
Views: 3602

Re: SIP NAT Traversal and Mangle

I have application for SIP on: Asterisk as a SIP server behind nat, clients on the outside behind a second NAT connecting to Asterisk (As referenced item #4 http://www.voip-info.org/wiki-Asterisk+SIP+NAT+solutions) Is the SIP helper coming along in Beta 3? I am ready to test. It's there already /He...
by Diganet
Mon May 07, 2007 10:56 pm
Forum: RouterBOARD hardware
Topic: Broadcast routing (router mode)
Replies: 7
Views: 6092

Re: Broadcast routing (router mode)

Hi, Is there any possibility MT to route broadcast traffic (255.255.255.255), from one IF nework to other IF network (in router mode) ? I have a server that is hosted in one net, use broadcast to announce itself, but clients are in other netowrk. I can't use bridge mode because of other configurati...
by Diganet
Mon May 07, 2007 12:28 pm
Forum: General
Topic: problems with mikrotik router RIC 522 routerboard 112
Replies: 9
Views: 2322

i have tried to connect with mac telnet and this the answer: jan/01/2000 00:41:32 system,error,critical login failure for user and via winbox Terminal linux detected ,using multiline input mode [admin@Mikrotik] > user print Flags X-disabled # NAME GROUP ADDRESS 0 ;;; system default user admin full ...
by Diganet
Fri Apr 27, 2007 8:22 pm
Forum: Wireless Networking
Topic: Nxtreme with omni anttenna
Replies: 1
Views: 942

Re: Nxtreme with omni anttenna

have anyone try using Nxtreme2 with an omni with sucess?
Yeah lots of times... you just have to use 2 :-)

/Henrik
by Diganet
Fri Apr 27, 2007 7:53 pm
Forum: Wireless Networking
Topic: have you had success within 100 m of high voltage lines?
Replies: 17
Views: 3160

Re: have you had success within 100 m of high voltage lines?

we've got a VIC (very important customer) within 100 m and roughly perpendicular of overhead high voltage distribution lines leading to the substation about 1 km away. Our shot is roughly perpendicular to the overhead lines and roughly 4 km. AP is RB532A+SR2+MaxRad Omni. CPE is subject to NDA, but ...
by Diganet
Fri Apr 27, 2007 10:31 am
Forum: General
Topic: support to XR3 -??
Replies: 4
Views: 2303

Re: support to XR3 -??

why u dont add support for XR3 ??
Exactly when did MT stop supporting AR5414?

/Henrik
by Diganet
Wed Apr 25, 2007 9:59 pm
Forum: General
Topic: MUM (new routerboards!)
Replies: 21
Views: 4778

Nobody from the forum is coming? And what about the big list of people that already signed up? Nobody here?
I'm coming all the way from Europe just to see the new boards and get free drinks :wink:

/Henrik
by Diganet
Mon Apr 23, 2007 12:35 pm
Forum: Wireless Networking
Topic: 90 Km link needed
Replies: 14
Views: 3623

Re: re 90 klm needed

hi again i would like to mention that baghdad and karbala are almost on the same hieght above water surface baghdad 34 m and karbala 30 m the distance between them 90 km dont u think that this is very high tower 160 m ??? is these measures perfect no way to make it smaller ??? :? One could be _real...
by Diganet
Wed Apr 18, 2007 3:52 pm
Forum: General
Topic: Uploadshaping with simple queues does not work
Replies: 6
Views: 1853

Re: Uploadshaping with simple queues does not work

hi all, I'm using a rb500 with mt router-os v3.0beta7. It is configured as wlan-accesspoint. therefore eth1&wlan1 are configured as bridge. the upstream is connected to eth1. my problem is to shape the upload-speed of the clients which are logged in on interface wlan1 I tried http://wiki.mikrot...
by Diganet
Tue Apr 17, 2007 7:40 am
Forum: General
Topic: Routing mystery.
Replies: 17
Views: 3753

Try Beta3. It supports interface based routing.

/Henrik
by Diganet
Tue Apr 17, 2007 7:38 am
Forum: General
Topic: Out via 1 gateway & in Via another
Replies: 2
Views: 1113

Re: Out via 1 gateway & in Via another

Hello If I send all my data out to one ISP & have most of it comming back via another (BGP) will that cause any problems? Both ISP's have filters open for my IP range. The reason is on is faster up the other is faster down. Thanks :-) In theory it shouldn't matter as long as the latency on the ...
by Diganet
Sun Apr 15, 2007 7:51 pm
Forum: General
Topic: Hotspot Trial User keeps changing MAC Address!
Replies: 7
Views: 2601

Re: Hotspot Trial User keeps changing MAC Address!

Hi all We have a hotspot set up with the trial user option. This allows potential customers 15 minutes unlimited access to the internet to test the system. The 15 minute period is reset every 29 hours to stop regular visitors coming by at the same time every day, and gaining access for free every d...
by Diganet
Sat Apr 14, 2007 9:21 pm
Forum: RouterBOARD hardware
Topic: i need to upgrade the router OS from 2.9.34 to 2.9.42
Replies: 8
Views: 2975

Re: i need to upgrade the router OS from 2.9.34 to 2.9.42

hi, i would like to upload extra modules to my routerboard 532a but they are all v2.9.42 when my routerboard OS is v2.9.34. as a result, these newer version modules don't work. i need to upgrade my router OS to v2.9.42. i have a level 4 license. in the wiki, it has directions but it points to an &q...
by Diganet
Thu Apr 12, 2007 11:21 pm
Forum: General
Topic: WhoW!
Replies: 6
Views: 2941

Marek,

Very nice. I have only been able to test from PC to RB532A. Please test this as well..

/Henrik
by Diganet
Thu Apr 12, 2007 12:51 pm
Forum: General
Topic: Downgrade Question
Replies: 4
Views: 2397

Re: Downgrade Question

If I have beta7 on a RB112 or RB533c if I want to downgrade to earlier beta (say Beta6) or to a 2.9.41 can I just copy the single upgrade package to the routerboard and do a system restart just like how I upgraded them i the first place or does it need to be done a different way? Thanks - never had...
by Diganet
Tue Apr 10, 2007 11:04 pm
Forum: General
Topic: new IP block not working
Replies: 4
Views: 1352

Re: new IP block not working

i just get a new /25 assigned to me by my provider (174.XXX.50.128/25) i was told to use my existing default route (64.XXX.133.XXX) Router A: i added 174.XXX.50.129/25 to ether3, plugged my laptop into ether3 addressed my laptop to 174.XXX.50.150/25 and could surf fine. Router B:now I plugged a mik...
by Diganet
Mon Apr 09, 2007 10:36 pm
Forum: The Dude
Topic: dude & windows terminal service problem
Replies: 10
Views: 3935

Re: rdp options

Which RDP client option you mean? where is that?
Can you please explain more?
Terminal server client, the program you use to connect to the server..

/Henrik
by Diganet
Mon Apr 09, 2007 10:16 pm
Forum: Wireless Networking
Topic: Slow Hotspot Performance
Replies: 4
Views: 1801

Re: Slow Hotspot Performance

Hi, I have been testing the Hotspot application on the RB112, I have found the following issue: - Running the latest stable version, 2.9.42. - Basic Config, IP address on Ether1 with default gateway. - WLAN card in AP Bridge mode - Simple hotspot created, clicking though the wizard. The problem enc...
by Diganet
Mon Apr 09, 2007 4:30 pm
Forum: The Dude
Topic: dude & windows terminal service problem
Replies: 10
Views: 3935

Re: dude & windows terminal service problem

I have a remote windows 2000 Advanced server that I usually logon to using terminal service. I have installed the dude on that server and started discovering the network, and it is ok. The problem is that I cannot see anything on the map (Blank) if I logon through the terminal service. When connect...
by Diganet
Mon Apr 09, 2007 4:26 pm
Forum: General
Topic: WhoW!
Replies: 6
Views: 2941

i got same performance with rb133 on 2.4ghz turbo enabled signal is -74/-76 CPU was 85%
Yeah proves to me that performance is bus/design related on 532A, not so much to do with CPU except for Nstreme of course..

/Henrik
by Diganet
Mon Apr 09, 2007 3:56 pm
Forum: General
Topic: WhoW!
Replies: 6
Views: 2941

Just out of curiosity, Is that one direction or bi-directional speed? What's the distance on the link, and what radio's and antennas are you using?
6KM, using Cyberbajt 23dBi panels H-Pol and R52.. One way of course..

/Henrik
by Diganet
Sat Apr 07, 2007 7:58 pm
Forum: The User Manager
Topic: Separating hotspot users
Replies: 9
Views: 3849

Any other suggestions on how I might be able to get around this ?

Regards
Paul
Perhaps one router somewhere in the middle being able to act as Radius Proxy for the routers behind it?..

/Henrik
by Diganet
Fri Apr 06, 2007 7:01 pm
Forum: General
Topic: Don't upgrade from Beta6 on production system ;)
Replies: 10
Views: 3988

Run a memtest and make sure all of your RAM is good.
Memory is fine.. Back on 2.9.... It's stable.. Maybe some shipset issue, we will see what MT comes up with..

/Henrik
by Diganet
Fri Apr 06, 2007 5:59 pm
Forum: General
Topic: EoIP encryption ?
Replies: 1
Views: 1562

EOIP doesn't encrypt traffic, you can however put in on top of ex. L2TP or IPSEC...


/Henrik
by Diganet
Fri Apr 06, 2007 5:57 pm
Forum: General
Topic: WHere do I start?
Replies: 13
Views: 3136

Well I have been misled on this project in more ways than one. I was told this was a $1000 router so my expectations were high. Come to find out its worth 200-300 tops so I guess Im getting what they paid for. I don't know, its like using dos when windows is available. What for? This is 2007, route...
by Diganet
Fri Apr 06, 2007 2:15 am
Forum: General
Topic: WHere do I start?
Replies: 13
Views: 3136

Re: WHere do I start?

The company I work for asked me to setup a wireless hotspot for a client of theirs. They purchased a routerboard 500 as they were told this is the best product and a former employee used it in the past for a similar application. I have general networking knowledge but this is a bit out of my expert...
by Diganet
Fri Apr 06, 2007 1:30 am
Forum: General
Topic: Don't upgrade from Beta6 on production system ;)
Replies: 10
Views: 3988

yes there is a reboot bug on some 5xx boards, I experienced it on 511. It needs a power cycle. Regards no there isn't. you are the only one who experienced it. beta 7 is recommended, it fixes so many bugs from beta 6 and it works very stable. we have it all around our network for a while now. Normi...
by Diganet
Fri Apr 06, 2007 1:02 am
Forum: General
Topic: WhoW!
Replies: 6
Views: 2941

WhoW!

Just did a test of B7 on one of my links.. I am able to push +40Mbit UDP and +30Mbit TCP through RB532s running 5G turbo with compression!...

Nice nice..

/Henrik
by Diganet
Thu Apr 05, 2007 11:59 pm
Forum: General
Topic: Ping out of specific interface
Replies: 1
Views: 1618

Re: Ping out of specific interface

when performing a ping from the terminal is it possible to specify the interface for the ping request ?


Thank you
Not specifick interface but the source address can be altered..

ping 123.123.123.123 src-address=xx.yy.zz.ww

/Henrik
by Diganet
Thu Apr 05, 2007 11:41 pm
Forum: General
Topic: Don't upgrade from Beta6 on production system ;)
Replies: 10
Views: 3988

yes there is a reboot bug on some 5xx boards, I experienced it on 511. It needs a power cycle. Regards no there isn't. you are the only one who experienced it. beta 7 is recommended, it fixes so many bugs from beta 6 and it works very stable. we have it all around our network for a while now. Normi...
by Diganet
Wed Apr 04, 2007 8:34 pm
Forum: Wireless Networking
Topic: Serious problem with P2P link
Replies: 8
Views: 2233

Very interesting. I saw another post with some guy having the same issues today but blamed the wireless driver and periodic recalibration. I wonder if RouterOS does something with the wireless cards themselves? I have been running 3Beta6 on these boxes before and maybe that have something to do with...
by Diganet
Wed Apr 04, 2007 5:20 pm
Forum: General
Topic: Don't upgrade from Beta6 on production system ;)
Replies: 10
Views: 3988

It never came up again and i am 1½ hours away from it and 300 WISP customers :D

/Henrik
by Diganet
Tue Apr 03, 2007 9:47 am
Forum: General
Topic: Multiple gateways,single Ip and scope, problem.
Replies: 3
Views: 1567

Try mangle the /32 adresses with passthrough=no and put them before the /24 mangles.. /Henrik Thx. I have just edit my post. i hawe already tried this, and the /32 is now before the /24. I think I hawe tried the passtrough=no command. still not working. /Henrik Oki, try this Look at the Example in ...
by Diganet
Mon Apr 02, 2007 11:42 pm
Forum: General
Topic: Multiple gateways,single Ip and scope, problem.
Replies: 3
Views: 1567

Try mangle the /32 adresses with passthrough=no and put them before the /24 mangles..

/Henrik
by Diganet
Mon Apr 02, 2007 6:09 pm
Forum: Wireless Networking
Topic: Serious problem with P2P link
Replies: 8
Views: 2233

did a channel change do anything?
Nope, same issue on all stable channels with/without turbo...

/Henrik
by Diganet
Mon Apr 02, 2007 2:27 pm
Forum: Wireless Networking
Topic: Serious problem with P2P link
Replies: 8
Views: 2233

radar? Janisk, Radar would change channels. I newer loose link, link stays up, just no frames get passed by it for some time and then it resumes.. However data is sent through it becausae i can see the RX/TX frame counter is increasing. One thing i can see just before traffic stops, is that ping ri...
by Diganet
Sun Apr 01, 2007 2:17 pm
Forum: Wireless Networking
Topic: RB112 + SR2 + 15db omni +48v POE .4a = bad pinging
Replies: 33
Views: 7252

hello guys the wds disabled but nothing happend not better not worest any very very very expert guys have same case and he resolve it the area is one of the most solti areas in the world it has full lakes of sult is this have anything to do ? buti tried diffrent access points and it works gr8 and s...
by Diganet
Sun Apr 01, 2007 12:48 pm
Forum: Wireless Networking
Topic: Serious problem with P2P link
Replies: 8
Views: 2233

Have you checked the Ethernet link status on the remote side when the link dies? Maybe it is an ethernet problem rather than wireless. I can access both routers when link is down from other paths via Eth.. i see registration on both sides, link is up and i see the TX/RX wireless counters go up.. Ju...
by Diganet
Sat Mar 31, 2007 6:43 pm
Forum: Wireless Networking
Topic: RB112 + SR2 + 15db omni +48v POE .4a = bad pinging
Replies: 33
Views: 7252

Taloot, I have had the same issue.. Wild pings up to 1 sec. Also running SR2's.. I tried everything, all channels etc, changed radio, pigtales etc... What worked for me was killing the WDS link on the omni and made a seperate radio/antenna for the wds part. After that i have no problems on that AP.....
by Diganet
Sat Mar 31, 2007 6:29 pm
Forum: General
Topic: List of Beta bugs / Features?
Replies: 2
Views: 1818

List of Beta bugs / Features?

I really would like to see a list of known bugs of the Betas.. I know this is Beta etc, but the really best place to test this for me is in a production environment where i really can evaluate performance etc... Therefore it would be so nice to see what bugs are confirmed by MT so i know where i can...
by Diganet
Fri Mar 30, 2007 10:21 pm
Forum: Wireless Networking
Topic: mac ping
Replies: 2
Views: 1176

Re: mac ping

I see this more often than i thinki should, the abilty of a radio to connect, via station or WDS, with a great signal, but MAC pings nor anything else go though. Most of my RBs are set to reboot if they cant ping the GW after 15 min or so, so i know they are rebooting, and i'll see them connect, bu...
by Diganet
Fri Mar 30, 2007 4:41 pm
Forum: Wireless Networking
Topic: Dual Nstreme - unexplained pps on WLAN interface
Replies: 1
Views: 1033

Re: Dual Nstreme - unexplained pps on WLAN interface

Hi, Iam running dual-NStreme on RB532. But there are pps and bandwidth discrepancy between the NStreme interface and the individual WLAN interface. So let's say the NStreme interface is, showing TX/RX 500/500 pps, the Tx WLAN will be 1000 pps and Rx WLAN will also show 1000pps, or approximately dou...
by Diganet
Fri Mar 30, 2007 12:14 am
Forum: Wireless Networking
Topic: Serious problem with P2P link
Replies: 8
Views: 2233

Serious problem with P2P link

Hi all, I have a very strange serious problem. I have this backbone P2P link made by 2 RB532's / SR5. I have perfect link, 90-100 CCQ and 40-50 SNR running 6km. I run 5GHz Turbo and easily push 35Mbit UDP through it. However every 10 minutes the link stops forwarding traffic. I have wireless link an...
by Diganet
Mon Mar 26, 2007 7:11 pm
Forum: Wireless Networking
Topic: PtP Link 65 km and at least 48 mb/s
Replies: 73
Views: 16369

Can we feed this system via PoE? We would need to be able to use 60m Ethernet. We can however use all 4 pairs if we have to..

/Henrik
by Diganet
Sun Mar 25, 2007 5:58 pm
Forum: General
Topic: Individual IP on graphs
Replies: 2
Views: 1224

You can make a graph of each queue, so you'll have to make a seperate queue of each IP you want to monitor or doing it another way, like using netflow/ntop or some syslog app..

/Henrik
by Diganet
Sun Mar 25, 2007 11:49 am
Forum: RouterBOARD hardware
Topic: Locked out. How to recover
Replies: 4
Views: 2230

Re: The problem was the serial cable

The problem was having a serial cable that didn't have the handshaking signals connected. It only had tx, rx, and gnd connected. As a result, the first menu was visable and the boot process up to "Starting Services..." And then nothing more could be seen. With the correct cable, I get a l...
by Diganet
Sat Mar 24, 2007 12:34 pm
Forum: RouterBOARD hardware
Topic: Locked out. How to recover
Replies: 4
Views: 2230

Format NAND, reinstall with Netinstall...

/Henrik
by Diganet
Thu Mar 22, 2007 12:15 am
Forum: Wireless Networking
Topic: 532A/SR2 almost not recieving
Replies: 4
Views: 1373

532A/SR2 almost not recieving

Hey I have an AP with RB532A/R52/SR2. R52 for 5GHz backhaul and SR2 for 2.4GHz AP. I am seeing strange things with this, like it's becoming deaf. When i scan (SR2) i see almost nothing and connected clients RSSI are all in the high 80's even if they're close.. However TX is good, clients have good R...
by Diganet
Wed Mar 21, 2007 11:48 pm
Forum: General
Topic: Praise for the Beta Version 6
Replies: 8
Views: 5067

Re: Praise for the Beta Version 6

How is Nstreme performing? /Henrik in our initial testing, we saw a performance boosts of 20% or more in area that had lots of other 802.11 traffic. we've also seen increased resistance to noise that was previously preventing links from even being estalished, and now we're able to push 1-2mbps acro...
by Diganet
Tue Mar 20, 2007 11:08 pm
Forum: General
Topic: Feature request: restarting interface
Replies: 20
Views: 16440

what effect? could you explain why you have to disable.enable, or even restart router to make changes to something - my overall impression is that ROS has to be restarted only when you are upgrading/updating to new version. Something i experience often is clients is unable to connect when changing ...
by Diganet
Tue Mar 20, 2007 10:47 pm
Forum: General
Topic: Praise for the Beta Version 6
Replies: 8
Views: 5067

Re: Praise for the Beta Version 6

I have loaded Beta version 6 and have tested with VOIP. I have to say I think that this is the best I have ever seen Mikrotik perform. I have SIP VOIP running and wireless with QOS and it performs like it has never done before. Wireless seemd to work better and is more responsive. The only thing I ...
by Diganet
Mon Mar 19, 2007 11:39 pm
Forum: General
Topic: Feature request: restarting interface
Replies: 20
Views: 16440

Now, If you disable the interface isn't it still active? I mean you can still sniff/scan (listen) without any problems so the interface isn't off, as you normally would expect when disabling something. I often have to reboot to really reset a wireless interface. Disabling/Enabling doesn't give the s...
by Diganet
Sat Mar 10, 2007 11:16 am
Forum: General
Topic: Sugestion: Windows setup wizard for common configurations
Replies: 20
Views: 7581

Re: Sugestion: Windows setup wizard for common configuration

I was wondering If You guys at Mikrotik could develop a setup wizard for the most common and basic configurations. Something friendly that eaven a novice could use to quickly setup the most common and basic configurations. My Idea of this would be something with a nice graphical interface, real sim...
by Diganet
Thu Mar 08, 2007 8:07 am
Forum: Wireless Networking
Topic: AP WDS..to HOW MANY Clients
Replies: 3
Views: 1509

Re: AP WDS..to HOW MANY Clients

Hi All, I have MT AP With WDS in my WIFI Network. How many Laptop can connect at a Time with 64 Kbps speed individually. Its Single Hall( Medium size) and my AP is installed in the central. Just i want to know the capacity, HOW MANY CLIENTS CAN CONNECT TO SINGLE AP. Well IN A medium single HALL you...
by Diganet
Wed Mar 07, 2007 6:29 pm
Forum: General
Topic: forwarding to ftp server
Replies: 6
Views: 25247

Re: forwarding to ftp server

Hello! I am writing, because I cannot get through Mikrotik's router to the ftp server.. And, what else is interesting, the NAT rule O is not wirking as well. I have just one real IP address. So to I need to make NAT rules, I supose, to get from internet to my ftp server, that does not have a real I...
by Diganet
Wed Mar 07, 2007 6:15 pm
Forum: Wireless Networking
Topic: N-Streme PtMP Latency\Jitter
Replies: 36
Views: 6486

N-Streme is really the only reason why I'm using Mikrotik. It would be quite foolish to turn it off. Why is N-Streme to blame? What can MT do to fix this or can I do to help mitigate it? If you put some more traffic on these links it will be better. N-streme has big latency when almost no traffic.....
by Diganet
Wed Mar 07, 2007 6:11 pm
Forum: RouterBOARD hardware
Topic: RB532 <> RB112 UL/DL speeds
Replies: 6
Views: 2504

Any Comments anyone having similar issue?
112 not supporting that speed?

THX
RB112 can do 15Mbit TCP. Look at your signal levels. It seems like the AP sees the client better than RB112 sees AP. Propably antenna adjustments needed..

/Henrik
by Diganet
Mon Mar 05, 2007 11:23 pm
Forum: RouterBOARD hardware
Topic: New Routerboards?
Replies: 71
Views: 21969

What's the point of 3 ethernet and 3 mini PCI with only 175Mhz CPU? I am hard pressed to imagine any use for such a product. 175Mhz is plenty for a CPE, but a CPE doesn't need that many ports... so I am forced to ask 'wtf?' It _could_ be used as an Backhaul/AP solution. If you're running 2.4B you d...
by Diganet
Sun Mar 04, 2007 3:51 pm
Forum: General
Topic: B6 Nstreme broken on RB532A but also good news
Replies: 0
Views: 1318

B6 Nstreme broken on RB532A but also good news

Hi, Tried 4 different boxes. 2 in live environment and 2 in lab. I can conclude that running Nstreme/Nstreme-Dual the routers stops forwarding traffic every 10 seconds or so when under heavy load, pauses 3-6 seconds and then starts again. I have just used normal Bandwith tests through the wireless 5...
by Diganet
Sat Mar 03, 2007 4:46 pm
Forum: General
Topic: LOW Signal over 4000msnm
Replies: 6
Views: 1647

Re: LOW Signal over 4000msnm

Hello i have this configuration AP= RB532+SR2+Omni 15dbi cliente1= edimax 23dbm+ panel 14dbi distancia= 700mts sigmal = -86 cliente2= ediamx 23dbm+grilla24 dbi distancia = 6km signal= -88 any idea for this Saludos How is that omni polarized? With those radios and antennas you should get much much b...
by Diganet
Sat Mar 03, 2007 4:40 pm
Forum: General
Topic: routing between two interfaces with ips from the same subnet
Replies: 21
Views: 5170

Try 3.0Beta6, is has Interface based routing.. so maybe 8)

/Henrik
by Diganet
Fri Mar 02, 2007 4:02 pm
Forum: Wireless Networking
Topic: Strange SNR issue
Replies: 2
Views: 1139

Bushy,

Thank you for the answer, but.. should i see the high SNR values in both ends?

/Henrik
by Diganet
Thu Mar 01, 2007 3:43 pm
Forum: General
Topic: Two IP addresses
Replies: 4
Views: 1566

Of course, NAT configuration is not escluded. But I meant sth.else. For example: One Public IP is 60.50.30.40 the other one is 50.60.30.40 Inside the LAN there is a Mail server. If some one wants to reach the server I have to configure as POP3 Server on their mail client the IP address 60.50.30.40 ...
by Diganet
Thu Mar 01, 2007 1:38 am
Forum: Wireless Networking
Topic: Strange SNR issue
Replies: 2
Views: 1139

Strange SNR issue

Hi all.. I have 2 6km links running in parallel. 1 is Vertically polarized and the other one is Horisontally polarized on 23dBi 5G Panels. They have been running stable for 2 months with about 30-35 dBi SNR.. (Best measured perfomance when they were installed). Now all of a sudden one of the links h...
by Diganet
Sat Feb 24, 2007 4:44 pm
Forum: General
Topic: tcp window size...
Replies: 16
Views: 8414

You cannot change the TCP window size on RouterOS.

/Henrik
by Diganet
Sat Feb 24, 2007 4:42 pm
Forum: General
Topic: concurrent users
Replies: 7
Views: 1975

Re: concurrent users

hi

how can i specify concurrent users in radius server so that single user can not log in simultaneously from different location.

thanks
This is something you set up on your RADIUS server, not on MT.

/Henrik
by Diganet
Sat Feb 24, 2007 4:40 pm
Forum: General
Topic: simple queue fairness clarification
Replies: 20
Views: 5570

? :D
You would have to make a Queuetree based on your WAN and LAN and make subqueues under that for both indcoming and outgoing. Easiest way to do this is to base the queues on mangled traffic from adress lists, otherwise you would need to make 2 queues for each user.

/Henrik
by Diganet
Fri Feb 23, 2007 4:03 pm
Forum: General
Topic: Wi-FI
Replies: 4
Views: 1212

Additionaly, 3.0 (release is on beta stage) provides more settings on 'interface wireless access-list', that is responsible for clients restrictions on the AP. 3.0 access-list provides 'time' option. Give it to us then.. We are waiiiiiiiiiiiiiiiiiiting :lol: More than 1 month since last Beta releas...
by Diganet
Fri Feb 23, 2007 11:41 am
Forum: General
Topic: Limit Bandwidth for 64 user> IMPORTANT
Replies: 12
Views: 5077

Re: Limit Bandwidth for 64 user> IMPORTANT

if i have all 2048 kbps and i have 64 user in my network. How to set users with CIR=32kbps MIR=64kbps Burst=512kbps, it is not the way create 64 simple queues and 1 parent, isnt it? by the way PCQ is not working good because when user want to download then he/she can not login to yahoo messenger , ...
by Diganet
Fri Feb 23, 2007 11:35 am
Forum: RouterBOARD hardware
Topic: Routerboard 400,600,1000
Replies: 6
Views: 2760

:D :D :D :D :D :D :D

/HP
by Diganet
Thu Feb 22, 2007 2:17 pm
Forum: General
Topic: Trouble with sending e-mails
Replies: 6
Views: 1746

Re: MT DSL

first simplify your network in normal scenario...you will be using pppoe for your dsl(yur router dialing pppoe), configure your dsl router in bridge mode n let MT dial your pppoe to dsl...this way you will have 83.* ip on your MT..then use single NAT on MT n see results. regards, Asad good idea! ha...
by Diganet
Thu Feb 22, 2007 12:52 pm
Forum: General
Topic: simple queue fairness clarification
Replies: 20
Views: 5570

Re: simple queue fairness clarification

I need a quick clarification on simple queues. For an example, I have 10 simple queues rate limiting 10 users by IP in the network. All are set to approx the same max/min settings and all queues are at the same level. Will all of the users equally share the Bandwidth when they are simultaneosuly us...
by Diganet
Thu Feb 22, 2007 1:44 am
Forum: General
Topic: Limit Bandwidth for 64 user> IMPORTANT
Replies: 12
Views: 5077

Re: Limit Bandwidth for 64 user> IMPORTANT

if i have all 2048 kbps and i have 64 user in my network. How to set users with CIR=32kbps MIR=64kbps Burst=512kbps, it is not the way create 64 simple queues and 1 parent, isnt it? by the way PCQ is not working good because when user want to download then he/she can not login to yahoo messenger , ...
by Diganet
Thu Feb 22, 2007 12:51 am
Forum: General
Topic: bridge vlan and same ethernet without vlan
Replies: 13
Views: 14685

Re: bridge vlan and same ethernet without vlan

Hi, I need a bridge with vlan1 and ether2. Vlan1 is over ether2. (Yes it's a strange config, but I have equipment which boots without vlan, get it's vlan via tftp and then runs with vlan. So I need the Router with the same IP with and without vlan on the same etherport). Everytime I enable port eth...
by Diganet
Wed Feb 21, 2007 12:45 pm
Forum: General
Topic: bridge vlan and same ethernet without vlan
Replies: 13
Views: 14685

PLease post configuration with ether2 enabled

/Henrik
by Diganet
Tue Feb 20, 2007 9:18 pm
Forum: General
Topic: Trouble with sending e-mails
Replies: 6
Views: 1746

Sorry didn't read your post properly, thought you were going out on another interface

/Henrik
  • 1
  • 2