You can use traffic flow with these applications: http://www.manageengine.com/products/netflow/netflow-screens.html http://www.ntop.org/products/ntop/ More helpfu; :wink: My clients getting different IP address and not static and i am using hotspot. Could i link the monitoring with their User names?

Hi, did you look at Traffic Flow? http://wiki.mikrotik.com/wiki/Manual:IP/Traffic_Flow

Thank you, Very helpful, Sorry I was not aware of this!

Dears, We are having some regulation in our internet provider that we have to install monitoring system for all custemers who are using the internet from our server. I mean the monitoring of websites visited with the time. I know that can be done in "logging" but i am asking for effective ...

I tried again this method but still not getting load balance
i have 5.14v

Thankx for reply but i still not getting load balance

Hi guys

I tried many different method for load balancing but it doest work and i did reseting all mikrotik setting and the problem was same!

My Modems both are in bridge mode (pppoe) and i have one ethernet output

Plz help.....

Hi guys.. I tried handards times with different ways to make the loadbalance work but there is no luck . i dont know why! here is my server info: 1 Lan 2 PPoe Thats it. If some one want to help i can give him team viewer access. UPDATE: I just right now make 2 gateways in one route and i got some tr...

because i want to link my hotspot with external web server so they can use it all of my clients!

Did you want a WAN for each LAN or both WANs load balanced for both LANS?


LOAD BALANCE

HI

i want to Setup 2WANS+2LANS with same IP range for LANS example :192.168.1.0/24
how can i do it??

i already setup my wans to ppoe

Thankx

yah

when i enable this rule the internet is tacken from both 2 wans butwhen i disable this rule the internet is tacken only by one wan.
so as i said with this rule i can get to my dns of my hotspots after login!
i only can check status page of hotspot by using hotspot ip not domine!!

soory to be noob
when i used this
/ip firewall nat
add chain=pre-hotspot action=accept dst-address-type=!local hotspot=auth
later i cant access to my dns server for example www.xxx.com = 192.168.1.10
when i type www.xxx.com it will not come but when i type 192.168.1.10 it works!!
any help???

Thankx
i have 1800mb free ram and also i am using core 2 duo processor!
is good to use it with method #1?

HI

i actaulay am looking for a way that i can give to 2 shared users a speed limit.if one of them is not online , the speed limit will doubled!
i mean a username in hotspot with 2 shared users!
i hope u understand me

Thankx again!!

But when i tried this
add dst-address=0.0.0.0/0 routing-mark=to-wan1 gateway=1.1.1.1 distance=0 ////=== distance it cant be = 0 >

Prevent Hotspot traffic from being proxied, then assign routing marks based on in-interface, then add default routes out the appropriate WAN provider as per the routing marks, then have fall through default routes in case a provider goes down. This assumes a whole bunch of stuff, but given that you...

Hi

i actually need help
i have to internet adsl line (2wan)
i have install 2 hotspots in Lan
I want only Wan1 to go in Lan1
and Wan2 to go in Lan2

any help???

HI I have mikrotik v4 with hotspot 1 lan and 1 wan pppoe now, i need to set up another hotspot with another lan card Lan2 I set up the second hotspot with another pool address the problem i can not get internet to the new hotspot!! some device is working and some is not!! the i change the new hotsp...

HI I have mikrotik v4 with hotspot 1 lan and 1 wan pppoe now, i need to set up another hotspot with another lan card Lan2 I set up the second hotspot with another pool address the problem i can not get internet to the new hotspot!! some device is working and some is not!! the i change the new hotspo...

thankx for info

i need to know if there's a way to open a web site from the winbox ??? if theres a script line to make this , we can open the manual from winbox so can we open another web site ??????because i mean i can open my winbox outside my network and i need for example to open my router 192.168.1.1 or my acc...

hi
first i am using a hotspot 4.11
I want to make a script that i could block automaticaly any bad host who is using high Rx ot Tx rate in ip/hotspot/host/
Because sometime i see some host having 2Mb Upload Rate causing increasing in CPU %
normaly i see this in a Host who still not login in my hotspot

Hi guys

I am suffering from getting Hack because i am using hotspot and the fuckers changing their mac address to a client mac address who is active so they get connected without user or pass!!
it is strange that mikrotik cannnot protect us from these bad people!!
Plz guid us!!!

How do I e-mail each user for it's MB left or time
Thank you for your time.

ok thanks too much
but is the out interface ( lan) ?

thanks for replying
so what is the solution?

http://www.up3rb.com/upfiles/yiJ25695.jpg http://www.up3rb.com/upfiles/U6u25728.jpg http://www.up3rb.com/upfiles/N9F25764.jpg http://www.up3rb.com/upfiles/LJU26862.jpg thanks u i hope u will solve my problem and i will be very Grateful to u problem(downloading from lan is not respons in one click a...

s some settings and i will put the other settings here next time1 http://www.up3rb.com/upfiles/DaP25259.jpg plz keep in mind that the costumers get ip successful without any problem but the problem when they download from lan they take 192.168.0.10 it apears in programm that he take this ip but when...