Try disabling SNMP
Mail sent to firstname.lastname@example.orgNormis,
at the minimum, send us the l7 rules that you used, and the basic config, so we can repeat the issue.
Correct, absolutely correct. That was the main reason I suggested to put LAN and any WAN into different subnets.There really isn't a good solution to this other than making the RouterBOARD the gateway for the LAN.
Welcome to the Internet.
I agree. We had very similar problems, so I get mad and set radius timeout to 10000 ... now everything is running fineit *looks* to me by the amount of retransmissions that MT is not waiting long enough for a reply from the radius server...
You`re right! Well, we found out what is going on with the old Fujitsu. Thank you a million!Older mainboards don't have 3,3V ni PCI slot...
add chain=forward in-interface=SBB protocol=tcp action=drop comment="" \ disabled=yes
Same here. CPU load upto 30% on P4 2.6GHz. We use also some basic firewall on the same box, without it I think CPU load should be few percent lower. Anyway, works very good.up to about 300 concurrent connections on 2.9.12 on a P4 without no problems
So, turn that NAT offIf you use parent proxy, it is not necessary to redirect incoming traffic to your MT to external proxy, this is automatically handled by webproxy in your MT.
YES! Thats correct!You want to route all p2p traffic through another ISP, right?
Everything is OK, finally!!! The bug is solved I have no problems with winbox as it did not crashed for more than 40 minutes! On 2.9.7 it crashed after max 2 minutes.no you don't, you don't use 2.9.8 yet, so you can't know. as I said, wait for 2.9.8Yes, I DO have it