Hallo,
I plan to run sstp via IPv6. Is there any progress in the problem.

Hallo,
is there a way to check the conditions on command presence /partitions?
Thank you.

Dears, I discovered a problem after the upgrade to 6.35.1(6.35). The problem is related to frozen ssh connections during inactivity. If I turn off fasttrack, the problem disappears. affected version: 6.35, 6.35.1 unaffected version: 6.34.1 hw: CCR1072 thank you for yor help connection parameters: wi...

Hallo,
I have tried also mikrotik and it works the same as a client There is no extension of expire time.

Hallo, DHCPv6-PD server correctly allocates prefix to the client, but if client sends renew and has status bound, the expire time will not be prolonged. Prolongation happens if renew is sent and the server is status waiting. I enclose log, as obvious evidence. Server HW: RB450G RoS: 6.34.2 Tested on...

Hallo, I have hardware Intel de3815tybe and I use integragated net card. The system identifies it as: RTL8111/8168B PCI Express Gigabit Ethernet controller (rev: 12) and use driver RealTek RTL8169 Gigabit Ethernet. According different level of load the ethernet freeze randomly. During the freezing t...

[admin@hvozdany-ar01.sporknet.cz] /system> /system resource print uptime: 46m36s version: 6.7 build-time: Nov/29/2013 13:37:20 free-memory: 104.6MiB total-memory: 128.0MiB cpu: MIPS 74Kc V4.12 cpu-count: 1 cpu-frequency: 600MHz cpu-load: 4% free-hdd-space: 110.2MiB total-hdd-space: 128.0MiB write-se...

@ spork Could we have more details on the antenna's used? Used antennas: https://ispforum.cz/download/file.php?id=2239 It is standard antenna with emitters moved 120*- Vertikal 0*,120*,240*. The question is, how should be polarization plugged in the rard. I have it now that chain 0 is 0*, chain 1 i...

Hello,
i have the following problem:
http://forum.mikrotik.com/viewtopic.php ... 99#p374686
MIMO 3x3 works only as MIMO 2x2
Has anybody good advice?

Hello, I have the same problem. I have link 500 metres out of 3x3 antennas and cards WLE350N5-23 7B. The signals are acceptable in all chains. Current-tx-powers shows maximum msc-7, it responds to link rate 300/300Mbps. Please, have you any idea, what is the problem? Used cards: WLE350N5-23 7B (AR95...

I came Gross the same problem.
DHCP doesnt work and CPU is fully 100% occupied
This happens only when DHCP works with VLAN,which is above bridge interface.

RoS: 5.6 - ok
RoS: 5.7 - dhcp not working

HW: RB433AH