Community discussions

MUM Europe 2020

Search found 79 matches

by matrot2
Mon Oct 14, 2013 12:57 pm
Forum: General
Topic: UPS configuration not saved ?
Replies: 3
Views: 814

Re: UPS configuration not saved ?

46 views with no one post any clue....

I'm not lucky enough
-bino-
Maybe this will help you.
http://tandem.ck.ua/ups_mtm-eng.php
by matrot2
Mon Oct 14, 2013 12:50 pm
Forum: General
Topic: Monitor APC Smart-UPS SC 420VA 230V
Replies: 1
Views: 618

Re: Monitor APC Smart-UPS SC 420VA 230V

Good afternoon everyone I would like to purchase a ups that had the possibility to be monitored by a rb450g, so that when lacking power the router send an email to inform this occurrence. For the research I've done on the forum, the APC are indicated. So, I wonder if anyone has tested the APC Smart...
by matrot2
Fri Nov 09, 2012 11:04 pm
Forum: RouterBOARD hardware
Topic: STILL DON'T FIND GOOD POWER SUPPLY
Replies: 8
Views: 1605

Re: STILL DON'T FIND GOOD POWER SUPPLY

Hi folks, My need is 2 x 70AH batteries, which can be charged with Solar Panel & Electricity or either. 1. I want to control or view the battery status remotely. 2. There should be a charge controller so batteries do not blow up. 3. SMS/Mail alerts at various battery levels. 4. Output filter for mu...
by matrot2
Tue Oct 23, 2012 5:12 pm
Forum: General
Topic: Supported UPS`s
Replies: 49
Views: 32823

Re: Supported UPS`s

Any chances to support UPS functionality by connecting via network to a NUT daemon? On miktotik (192.168.0.100): [admin@MikroTik] > /port print Flags: I - inactive # NAME CHANNELS USED-BY BAUD-RATE 0 serial0 1 remote-access 2400 [admin@MikroTik] > /port remote-access print Flags: X - disabled, I - ...
by matrot2
Sun Oct 07, 2012 2:21 pm
Forum: General
Topic: Supported UPS`s
Replies: 49
Views: 32823

Re: Supported UPS`s

Why does no one use the UPS company MeanWell?
This solution is very effective.
This solution has the ability to remotely control UPS.
by matrot2
Fri Sep 07, 2012 8:53 am
Forum: Wireless Networking
Topic: Multiple power supplies
Replies: 47
Views: 12729

Re: Multiple power supplies

Convenient and affordable solution for batteries up to 60 A * h. P S C-60 - http://www.meanwell.com/search/psc-60/default.htm This solves all problems. Up to 60ah but my plan as i have them to hand is 2 X 113ah deep cycle batteries in series, now how would i re-charge them if they ran down, Could a...
by matrot2
Fri Sep 07, 2012 8:29 am
Forum: Wireless Networking
Topic: Switching Power Supply with Charger (UPS function)
Replies: 6
Views: 1879

Re: Switching Power Supply with Charger (UPS function)

SCP-35 / SCP-50 / SCP-75
ADS-55 / ADS-155
AD-55 / AD-155
ADD-55 / ADD-155
PSC-60 / PSC-100
http://www.meanwell.com/

Good decision in the sketch. (2 pcs. PSC-60A, or 2 pcs PSC-100A)
It works correctly with the battery.
by matrot2
Mon Jul 09, 2012 11:03 pm
Forum: General
Topic: Sample Installations - Sticky Please
Replies: 230
Views: 137436

Re: Sample Installations - Sticky Please

Hi, i want to use 2 100Ah battery (@12v) with poe patch panel and 8 routerboard 411ah. The MeanWell AD-155 is good? Or what ? AD155 provides a small charging current. Current charge for your problems is not enough! ( 2 100Ah battery!!!) Here it is better to PSC-60 / PSC-100, SCP-35 / SCP-50 / SCP-7...
by matrot2
Thu Jul 05, 2012 11:37 am
Forum: General
Topic: UPS monitor via SNMP
Replies: 1
Views: 1656

Re: UPS monitor via SNMP

Maybe this will help you.
-Working with WinBox
-Working with Dude
-Examples of scripts
http://tandem.ck.ua/ups_mtm-eng.php
by matrot2
Fri Jun 01, 2012 4:53 pm
Forum: General
Topic: UPS Monitoring
Replies: 18
Views: 2588

Re: UPS Monitoring

Rebooting is necessary because if there is some equipment crashes at the tower rebooting the ups is a quick and easy fix.
If there is a hardware failure, then work through COM and LAN can be a problem.
by matrot2
Tue May 29, 2012 9:57 am
Forum: General
Topic: UPS Monitoring
Replies: 18
Views: 2588

Re: UPS Monitoring

Is it possible to reboot the UPS from ROS (with the legacy card)?
Why the reboot is necessary?
by matrot2
Sun May 27, 2012 5:51 pm
Forum: General
Topic: UPS Monitoring
Replies: 18
Views: 2588

Re: UPS Monitoring

dell
by matrot2
Mon Apr 30, 2012 12:56 am
Forum: RouterBOARD hardware
Topic: Routerboard and Power
Replies: 9
Views: 1690

Re: Routerboard and Power

Hi all I have got a simple question: How to inform Routerboard that buffered power supply unit is getting power from DC batteries not from AC? It would be a quite useful thing to know that there are problems with AC. How do You solve that kind of problems? Best Wishes from Poland ;) http://tandem.c...
by matrot2
Fri Feb 24, 2012 11:26 am
Forum: RouterBOARD hardware
Topic: RB750 don't work after power failure.
Replies: 1
Views: 552

Re: RB750 don't work after power failure.

Hi I have two rb750's the problem i am facing is that when light goes off and come again my rb don't work(means at client end hotspot page even don't come, server not found error comes), i am not using any ups, generator or any backup, but if i restart rb it work perfect, i can't be at rb to restar...
by matrot2
Sat Feb 11, 2012 7:33 pm
Forum: Wireless Networking
Topic: Multiple power supplies
Replies: 47
Views: 12729

Re: Multiple power supplies

Convenient and affordable solution for batteries up to 60 A * h.
P S C-60 - http://www.meanwell.com/search/psc-60/default.htm
This solves all problems.
by matrot2
Thu Feb 09, 2012 4:12 pm
Forum: RouterBOARD hardware
Topic: My Setup, after reading many tips from this forum :)
Replies: 4
Views: 3031

Re: My Setup, after reading many tips from this forum :)

Monitoring power outages? I have seen some scripts out there and i belive someone can give me a tip on how to do this from my RB800? I would like to get a email when i am on battery power and when i am restored. (voltage reports?) Thanks! You can do something like this: http://tandem.ck.ua/img/elec...
by matrot2
Thu Feb 09, 2012 10:37 am
Forum: General
Topic: Power System (UPS)
Replies: 5
Views: 1064

Re: Power System (UPS)

OK but this is only a power supply with battery charger... How i can manage this system ? How this system alert me ? Support remote control (ex GMS/SMS) ? Here is an example of a slightly similar system: http://tandem.ck.ua/img/electronics/ups/ups_mt24B1sch.png For GSM signal I use is: http://oko.p...
by matrot2
Wed Feb 08, 2012 9:02 pm
Forum: General
Topic: Power System (UPS)
Replies: 5
Views: 1064

Re: Power System (UPS)

Hi, can anyone recommend a UPS system with: - E-Mail Alert - SMS Alert - SNMP - Web Interface - Big battery pack (Up to 100A) Regards. Convenient and affordable solution for batteries up to 60 A * h. P S C-60 - http://www.meanwell.com/search/psc-60/default.htm Must be connected in series, two such ...
by matrot2
Wed Jan 18, 2012 11:58 am
Forum: General
Topic: APC Smart UPS new LCD version with Mikrotik RB
Replies: 7
Views: 1930

Re: APC Smart UPS new LCD version with Mikrotik RB

Simply change the UPS to AD-155, or something like that.
UPS monitor, for such an event:
http://tandem.ck.ua/ups_mtm-eng.php
by matrot2
Sun Jan 15, 2012 1:15 pm
Forum: The Dude
Topic: PING email notifications
Replies: 8
Views: 3555

Re: PING email notifications

Here is an example of solving this problem: http://tandem.ck.ua/dude-eng.php
by matrot2
Tue Dec 13, 2011 7:39 pm
Forum: Wireless Networking
Topic: Multiple power supplies
Replies: 47
Views: 12729

Re: Multiple power supplies

How is this done, componet change or preset adjustment?
We must not forget that the effective capacity reduced to 50 watts when charging the battery.
by matrot2
Tue Dec 13, 2011 3:20 pm
Forum: Beginner Basics
Topic: Network crashing
Replies: 2
Views: 630

Re: Network crashing

Dear all The system worked fine for the last 6 months with no problems at all, only for the last two weeks I am facing a frustrating problem, the whole network crash suddenly, ping from usualy is 1 ms between the bases suddenly become 800ms then 2000 ms and then time out or destination host unreach...
by matrot2
Tue Dec 13, 2011 3:03 pm
Forum: Wireless Networking
Topic: Multiple power supplies
Replies: 47
Views: 12729

Re: Multiple power supplies

The problem arises that if you want to rise the voltage at battery terminals to 27,2-27,3V, you have to also increase the output rail voltage (that is the simple way), which then becomes ~28,1V which isn't what you want with most RouterBoards, since their specification tells you shouldn't apply mor...
by matrot2
Tue Nov 22, 2011 8:18 pm
Forum: General
Topic: UPS Monitoring
Replies: 18
Views: 2588

Re: UPS Monitoring

Yeah, I've looked at those. The problem, is that the wiki tells me that I can monitor it directly using an appropriate serial cable.
Without cable. UPS needed AD-55 or AD-155.
by matrot2
Mon Nov 21, 2011 10:33 am
Forum: General
Topic: UPS Monitoring
Replies: 18
Views: 2588

Re: UPS Monitoring

Maybe this will help you.
http://tandem.ck.ua/ups_mtm-eng.php
by matrot2
Fri May 06, 2011 11:09 am
Forum: Wireless Networking
Topic: Multiple power supplies
Replies: 47
Views: 12729

Re: Multiple power supplies

Why not try a AD-55 or AD-155? Examples here: http://tandem.ck.ua/ups_mt-eng.php That is a single PSU there is no redundancy For important sites, I put a separate (redundant) power supply. He is completely galvanically isolated. This is to ensure that at risk he was alive. Connection manually. http...
by matrot2
Fri May 06, 2011 9:55 am
Forum: Wireless Networking
Topic: Multiple power supplies
Replies: 47
Views: 12729

Re: Multiple power supplies

Why not try a AD-55 or AD-155?
Examples here: http://tandem.ck.ua/ups_mt-eng.php
by matrot2
Wed Apr 13, 2011 10:01 pm
Forum: RouterBOARD hardware
Topic: Solar Tracking
Replies: 10
Views: 4652

Re: Solar Tracking

Can anybody recommend a hybrid solar/wind charge controller for charging the battery bank, I have not seen one that can be remote monitor the charging status of the both wind or solar? for example a possible senario; if the solar panel was damaged and at the time the turbine was supplying enough to...
by matrot2
Wed Apr 06, 2011 10:23 pm
Forum: RouterBOARD hardware
Topic: UPS and UPS Monitor Posted: Tue Sep 28, 2010 9:14 pm
Replies: 1
Views: 1008

Re: UPS and UPS Monitor Posted: Tue Sep 28, 2010 9:14 pm

For details on configuring Dude to work with the UPS monitor, Eng. - http://tandem.ck.ua/dude-eng.php
by matrot2
Wed Apr 06, 2011 9:25 am
Forum: General
Topic: 750g power problems
Replies: 6
Views: 736

Re: 750g power problems

I have problems with English.
UPS should be without breaking the food chain.
For example : http://www.meanwelldirect.co.uk/product ... efault.htm, or http://www.meanwelldirect.co.uk/product ... efault.htm
by matrot2
Tue Apr 05, 2011 12:46 pm
Forum: General
Topic: 750g power problems
Replies: 6
Views: 736

Re: 750g power problems

Hello all,

I have the above mentioned router. I have it on a UPS, but every once in a while it will lose power. I have to unplug and replug it several times to get it to come back on.

Does this sound like a power supply issue or a problem with the router itself?

Thanks.
UPS is used online?
by matrot2
Thu Mar 31, 2011 12:56 pm
Forum: The Dude
Topic: Problems with functions and probes
Replies: 3
Views: 1223

Re: Problems with functions and probes

Thanks, it works.
by matrot2
Wed Mar 30, 2011 9:30 pm
Forum: The Dude
Topic: Problems with functions and probes
Replies: 3
Views: 1223

Re: Problems with functions and probes

string_compare compares two strings, returns 0 if equal Probes: name: test_compare1 available: 1 error: string_compare("111","111") name: test_compare2 available: 1 error: string_compare("111","222") name: test_compare3 available: 1 error: string_compare("aaa","aaa") name: test_compare4 available: ...
by matrot2
Wed Mar 30, 2011 12:30 pm
Forum: General
Topic: Supported UPS`s
Replies: 49
Views: 32823

Re: Supported UPS`s

Witch UPS models are suppoprted by RouterOS? I have sucefully connected and installed Cyberpower Value 600E.other upses are not recognized by MT.
You can apply this solution. http://tandem.ck.ua/ups_mtm-eng.php
by matrot2
Tue Mar 29, 2011 12:52 pm
Forum: The Dude
Topic: Problems with functions and probes
Replies: 3
Views: 1223

Problems with functions and probes

Hi. Here is an example. Functions: name: test_function code: "aaa" Probes: name: test_probe1 available: 1 error: test_function() name: test_probe2 available: 1 error: if (test_function()="bbb","bbb","not bbb") results: test_probe1 - aaa test_probe2 - bbb What is that? And where is a dude function's ...
by matrot2
Sat Mar 26, 2011 11:17 pm
Forum: RouterBOARD hardware
Topic: Redundant power inputs
Replies: 25
Views: 6331

Re: Redundant power inputs

Hi all, Are there any plans to produce a RouterBOARD with redundant power inputs? Alternatively, is there a strategy others are using for a power supply with built in redundancy. Just had a RB fall over at a very unfortunate time in the night due to power supply failure. UPS http://tandem.ck.ua/ups...
by matrot2
Fri Jan 14, 2011 8:19 pm
Forum: General
Topic: Monitoring Device thru SMS Alerts
Replies: 1
Views: 745

Re: Monitoring Device thru SMS Alerts

Hallo Everyone, I am still new to Mikrotik and there is a question that I have. We have 5 offices and I need to see when the power at my office is of, the Microtik can send you SMS Alerts on the network. I want to know can you monitor a device to see when the power is off? I see you can monitor a U...
by matrot2
Thu Dec 23, 2010 4:33 pm
Forum: The Dude
Topic: SNMP and UPS status
Replies: 10
Views: 8746

Re: SNMP and UPS status

!!! What's new in 5.0rc6 (2010-Dec-23 13:33) Gobi users should change this setting or directory name; *) ups - support USB UPS on RB4xx as well; *) snmp - fix BER encoding for some INTEGER based values; *) snmp - provide proxy stats using SQUID-MIB; *) snmp - provide ups info using UPS-MIB; *) snmp ...
by matrot2
Sun Dec 12, 2010 11:24 pm
Forum: Beginner Basics
Topic: Mikrotik RouterOS UPS Support
Replies: 4
Views: 834

Re: Mikrotik RouterOS UPS Support

Hello, i have connected a UPS with Serial Cable it called DB9 connector cable with RouterOS but in ups option its not working ..... is there any specific models of ups which will run with mikrotik routeros???? or is there any special cable to connect the ups to router os?? Arman It's here: http://t...
by matrot2
Tue Dec 07, 2010 10:56 pm
Forum: Wireless Networking
Topic: Redundant PoE Power
Replies: 17
Views: 3781

Re: Redundant PoE Power

Is anyone using a redundant PoE setup? I have two AC power sources that are far apart from each other. I would like to power a single routerboard with both power sources using POE. I am thinking of a 12-24v DC switch that I can inject 2 inputs and a single output. I know APC makes them for AC but n...
by matrot2
Sun Nov 21, 2010 11:56 pm
Forum: Wireless Networking
Topic: Redundant PoE Power
Replies: 17
Views: 3781

Re: Redundant PoE Power

Is anyone using a redundant PoE setup? I have two AC power sources that are far apart from each other. I would like to power a single routerboard with both power sources using POE. I am thinking of a 12-24v DC switch that I can inject 2 inputs and a single output. I know APC makes them for AC but n...
by matrot2
Sat Oct 09, 2010 12:27 am
Forum: Scripting
Topic: Check interface script for power outages
Replies: 3
Views: 5040

Re: Check interface script for power outages

Works perfectly! Thank You!
I if I schedule this every 5 minutes, when the power goes out I get log reminders that its down every 5 min :) But at least I am notified. (Been having lots of storms lately in my area).
This can be sdelatv Dude.
Rus. :(
http://tandem.ck.ua/dude.php
by matrot2
Sun Oct 03, 2010 10:06 pm
Forum: RouterBOARD hardware
Topic: SolarTik
Replies: 71
Views: 17186

Re: SolarTik

RS232 interface so it can report voltages etc to the MT
It's here: http://tandem.ck.ua/ups_mtm-eng.php
by matrot2
Tue Sep 28, 2010 11:09 pm
Forum: RouterBOARD hardware
Topic: RB750 PoE on all ports Mod
Replies: 52
Views: 31179

Re: RB750 PoE on all ports Mod

Similar device. 1. Number of connected clients - Up to 4 2. PoE voltage 18 ... 24 V, 700 mA 3. Maksimalnoya cable length of 30 ... 50 m 4. The possibility of switching to a central switch RoeE (eg RB-411) - is available. 5. Lightning protection - there are at each port. 6. Short circuit protection -...
by matrot2
Tue Sep 28, 2010 9:25 pm
Forum: RouterBOARD hardware
Topic: UPS and UPS Monitor Posted: Tue Sep 28, 2010 9:14 pm
Replies: 1
Views: 1008

UPS and UPS Monitor Posted: Tue Sep 28, 2010 9:14 pm

Your UPS-MT-monitor is designed for remote monitoring of power MikroTik routerboard, which have the supply voltage in range from 10V to 28V. (the models of MikroTik routerboard: B411/411A/411AH, RB433/433AH/433UAH, RB450/450G, RB33, RB493/493AH) UPS-MT-monitor, in conjunction with the AD-55 (AD-155)...
by matrot2
Tue Sep 28, 2010 8:45 pm
Forum: The Dude
Topic: SMS Sender Source Code.
Replies: 4
Views: 3961

Re: SMS Sender Source Code.

Sending SMS to Dude for Ukraine: http://tandem.ck.ua/dude.php
Russian language: (.
Use http://translate.google.com
I hope this will be useful.
by matrot2
Wed Sep 22, 2010 4:43 pm
Forum: General
Topic: Will this UPS work with the UPS package? ....Last 3 didn't
Replies: 11
Views: 1892

Re: Will this UPS work with the UPS package? ....Last 3 didn

Instead Smart using AD-55A (B), or AD-155A (B) (Mean Well) with UPS-monitor - http://tandem.ck.ua/ups_mtm-eng.php.
Image
by matrot2
Wed Jun 09, 2010 12:06 am
Forum: The Dude
Topic: Notifications -order of events
Replies: 10
Views: 2463

Re: Notifications -order of events

For mikrotik have special devices UPS-MT-monitor - http://tandem.ck.ua/ups_mtm-eng.php
They work correctly with the UPS-MT (http://tandem.ck.ua/ups_mt-eng.php), which can be collected by hand.
Very reliable and proven alternative.
by matrot2
Tue Jun 08, 2010 11:55 pm
Forum: Wireless Networking
Topic: R52H Failure
Replies: 15
Views: 2017

Re: R52H Failure

I have 2 years came down with more than 30 pieces. R52H.
Symptoms are the same.
Several helps protect - RB-5 (2) (http://tandem.ck.ua/grz.php # rb)
Malfunction due to static electricity.
by matrot2
Thu Apr 08, 2010 6:05 pm
Forum: RouterBOARD hardware
Topic: UPS problem
Replies: 8
Views: 1475

Re: UPS problem

In our solutions, and the UPS battery is far from the RB-411 (433).
From 10 to 80 m.
For this case, your solution does not fit.
There can be no voltage 13,8 V on the battery.
Such inclusion of the battery, I think not correct.
Sorry.
by matrot2
Thu Apr 08, 2010 3:44 pm
Forum: RouterBOARD hardware
Topic: Why need two power jacks on RB450?
Replies: 5
Views: 1514

Re: Why need two power jacks on RB450?

This decision is bad:
1. Insufficient charge the battery.
2. Deep discharge batteries. Small life of the battery.
3. No monitoring.
by matrot2
Thu Apr 08, 2010 3:36 pm
Forum: RouterBOARD hardware
Topic: UPS problem
Replies: 8
Views: 1475

Re: UPS problem

You can use this solution for power backup feature. It's cheaper and smaller.

http://forum.mikrotik.com/viewtopic.php?f=3&t=39117
This decision is bad:
1. Insufficient charge the battery.
2. Deep discharge batteries. Small life of the battery.
3. No monitoring.
by matrot2
Thu Apr 08, 2010 2:00 pm
Forum: RouterBOARD hardware
Topic: UPS problem
Replies: 8
Views: 1475

Re: UPS problem

by matrot2
Tue Dec 22, 2009 3:01 pm
Forum: General
Topic: SNMP OID for Script Results
Replies: 17
Views: 8747

Re: SNMP OID for Script Results

From APC UPS work is not convenient if PoE cable length greater than 5 meters. I am impressed by this: http://tandem.ck.ua/ups_mtm-eng.php http://tandem.ck.ua/ups_mt-eng.php This a good product, but my UPS is within the same enclousure as the router so cable length is fine. I can see all the data i...
by matrot2
Mon Dec 21, 2009 8:57 pm
Forum: General
Topic: SNMP OID for Script Results
Replies: 17
Views: 8747

Re: SNMP OID for Script Results

why do you need this? example? did you know that the Dude can get results of any command even if there is no OID for it? I have been trying to find information on using the Dude to do just this, but can not acheive success. I have an APC UPS connected using USB, I have the UPS Package installed and...
by matrot2
Sun Nov 22, 2009 8:46 pm
Forum: Beginner Basics
Topic: UPS monitoring Help
Replies: 1
Views: 484

Re: UPS monitoring Help

Mikrotik only supports UPS APC.
About UPS-monitor for Mikrotik: http://tandem.ck.ua/ups_mtm-eng.php
by matrot2
Mon Nov 16, 2009 9:01 pm
Forum: RouterBOARD hardware
Topic: Need help on UPS battery monitoring for routerboards
Replies: 31
Views: 9054

Re: Need help on UPS battery monitoring for routerboards

Hi. Why not buy a really cheap device, like a wifi router, power that from the mains, and ping it from your mikrotik ? When the mains goes off, your MT will be on UPS power, and the pings will stop. Use Netwatch to send you an email or something. For a very cheap device requires an additional switc...
by matrot2
Mon Nov 09, 2009 8:35 pm
Forum: General
Topic: Sample Installations - Sticky Please
Replies: 230
Views: 137436

Re: Sample Installations - Sticky Please

We install RB very close to the antenna. UPS for 230 sometimes crash, then we use the AD-55 or AD-155 - http://tandem.ck.ua/ups_mt-eng.php. Monitoring food http://tandem.ck.ua/ups_mtm-eng.php. UPS-MT-monitor can also control the power, if RB411 (433) does not want to respond (hangs). Nice and neat ...
by matrot2
Mon Nov 09, 2009 12:52 am
Forum: General
Topic: Sample Installations - Sticky Please
Replies: 230
Views: 137436

Re: Sample Installations - Sticky Please

We install RB very close to the antenna.
UPS for 230 sometimes crash, then we use the AD-55 or AD-155 - http://tandem.ck.ua/ups_mt-eng.php.
Monitoring food http://tandem.ck.ua/ups_mtm-eng.php.
UPS-MT-monitor can also control the power, if RB411 (433) does not want to respond (hangs).
by matrot2
Thu Nov 05, 2009 10:08 am
Forum: RouterBOARD hardware
Topic: Power issue in HARDWARE RB411 / RB433 and probably RB433AH
Replies: 31
Views: 13318

Re: Power issue in HARDWARE RB411 / RB433 and probably RB433AH

We did not use MEANWELL ADD-155b.
We use the AD-55A (B) and AD-155A (B).
Problems with power do not have.
by matrot2
Mon Nov 02, 2009 8:55 pm
Forum: Scripting
Topic: UPS alarm monitoring
Replies: 1
Views: 749

Re: UPS alarm monitoring

by matrot2
Tue Sep 08, 2009 5:16 pm
Forum: General
Topic: 12V vs 18V vs 24V
Replies: 16
Views: 4349

Re: 12V vs 18V vs 24V

Just to post our experiences.... previously our RB532 bts's was powered with 18V-7A battery with 3A charger power supply and it only last max 2 hours. about a month ago, we change the power supply with 12V-14A battery with 3A charger and seems it can last untill 4 hours. The above RB532 are filled ...
by matrot2
Thu Aug 27, 2009 2:26 pm
Forum: RouterBOARD hardware
Topic: Power issue in HARDWARE RB411 / RB433 and probably RB433AH
Replies: 31
Views: 13318

Re: Power issue in HARDWARE RB411 / RB433 and probably RB433AH

I think that the cheap and good way how to slove this is to buy come offline UPS and connect RB directly to the battery. UPS will make sure the battery is still charged. Or you can buy some big 12V battery (car starter battery) and some good battery charger with storage charge function and you have...
by matrot2
Thu Aug 13, 2009 8:13 am
Forum: Wireless Networking
Topic: 28V or 26V POE Injector
Replies: 18
Views: 3158

Re: 28V or 26V POE Injector

RB consumes pulse current.
If the voltmeter shows 12 - not always so.
Better use additional phantom power.
by matrot2
Mon Jul 20, 2009 10:18 pm
Forum: General
Topic: ups !!!!!!!!!!!!!!!!
Replies: 30
Views: 7852

Re: ups !!!!!!!!!!!!!!!!

Or use special UPS.
http://tandem.ck.ua/ups_mt-eng.php

Mikrotik does not yet support SNMP module UPS!!
http://forum.mikrotik.com/viewtopic.php ... mp#p161494
by matrot2
Fri Jul 17, 2009 4:56 pm
Forum: The Dude
Topic: RB with UPS-Package and Dude 3.4
Replies: 3
Views: 1549

Re: RB with UPS-Package and Dude 3.4

Mikrotik Response: "Thank you very much for the request.
Currently such options are not available over SNMP, but we added these
features to our todo list. "
by matrot2
Thu Jul 09, 2009 6:40 pm
Forum: RouterBOARD hardware
Topic: Need help on UPS battery monitoring for routerboards
Replies: 31
Views: 9054

Re: Need help on UPS battery monitoring for routerboards

Excuse.
I was on rest. Tomorrow I will give answers.
by matrot2
Tue Jul 07, 2009 9:34 am
Forum: RouterBOARD hardware
Topic: Need help on UPS battery monitoring for routerboards
Replies: 31
Views: 9054

Re: Need help on UPS battery monitoring for routerboards

The English page will be 13.07. 2009.
I will inform you.
by matrot2
Sat Jul 04, 2009 3:17 pm
Forum: Scripting
Topic: UPS power monitor script errors
Replies: 6
Views: 2592

Re: UPS power monitor script errors

There is ready decision UPS and UPS monitor for a mikrotik.
http://tandem.ck.ua/ups_mtm.php
http://local.com.ua/forum/index.php?showtopic=15362
by matrot2
Thu Jun 25, 2009 12:55 pm
Forum: The Dude
Topic: SNMP and UPS status
Replies: 10
Views: 8746

Re: SNMP and UPS status

http://tandem.ck.ua/ups_mtm.php http://i062.radikal.ru/0904/86/b8e45901b98d.jpg http://local.com.ua/forum/index.php?showtopic=15362 http://s48.radikal.ru/i121/0906/14/c7e1bd8e3486.jpg The answer of the mikrotik: "Thank you very much for the request. Currently such options are not available over SNMP...