MikroTik

matrot2

46 views with no one post any clue....

I'm not lucky enough
-bino-

Maybe this will help you.
http://tandem.ck.ua/ups_mtm-eng.php

matrot2

Good afternoon everyone I would like to purchase a ups that had the possibility to be monitored by a rb450g, so that when lacking power the router send an email to inform this occurrence. For the research I've done on the forum, the APC are indicated. So, I wonder if anyone has tested the APC Smart...

matrot2

Hi folks, My need is 2 x 70AH batteries, which can be charged with Solar Panel & Electricity or either. 1. I want to control or view the battery status remotely. 2. There should be a charge controller so batteries do not blow up. 3. SMS/Mail alerts at various battery levels. 4. Output filter fo...

matrot2

Any chances to support UPS functionality by connecting via network to a NUT daemon? On miktotik (192.168.0.100): [admin@MikroTik] > /port print Flags: I - inactive # NAME CHANNELS USED-BY BAUD-RATE 0 serial0 1 remote-access 2400 [admin@MikroTik] > /port remote-access print Flags: X - disabled, I - ...

matrot2

Why does no one use the UPS company MeanWell?
This solution is very effective.
This solution has the ability to remotely control UPS.

matrot2

Convenient and affordable solution for batteries up to 60 A * h. P S C-60 - http://www.meanwell.com/search/psc-60/default.htm This solves all problems. Up to 60ah but my plan as i have them to hand is 2 X 113ah deep cycle batteries in series, now how would i re-charge them if they ran down, Could a...

matrot2

SCP-35 / SCP-50 / SCP-75
ADS-55 / ADS-155
AD-55 / AD-155
ADD-55 / ADD-155
PSC-60 / PSC-100
http://www.meanwell.com/

Good decision in the sketch. (2 pcs. PSC-60A, or 2 pcs PSC-100A)
It works correctly with the battery.

matrot2

Hi, i want to use 2 100Ah battery (@12v) with poe patch panel and 8 routerboard 411ah. The MeanWell AD-155 is good? Or what ? AD155 provides a small charging current. Current charge for your problems is not enough! ( 2 100Ah battery!!!) Here it is better to PSC-60 / PSC-100, SCP-35 / SCP-50 / SCP-7...

matrot2

Maybe this will help you.
-Working with WinBox
-Working with Dude
-Examples of scripts
http://tandem.ck.ua/ups_mtm-eng.php

matrot2

http://tandem.ck.ua/img/electronics/ups/940-0024C.jpg

matrot2

Rebooting is necessary because if there is some equipment crashes at the tower rebooting the ups is a quick and easy fix.

If there is a hardware failure, then work through COM and LAN can be a problem.

matrot2

Is it possible to reboot the UPS from ROS (with the legacy card)?

Why the reboot is necessary?

matrot2

matrot2

Hi all I have got a simple question: How to inform Routerboard that buffered power supply unit is getting power from DC batteries not from AC? It would be a quite useful thing to know that there are problems with AC. How do You solve that kind of problems? Best Wishes from Poland ;) http://tandem.c...

matrot2

Hi I have two rb750's the problem i am facing is that when light goes off and come again my rb don't work(means at client end hotspot page even don't come, server not found error comes), i am not using any ups, generator or any backup, but if i restart rb it work perfect, i can't be at rb to restar...

matrot2

Convenient and affordable solution for batteries up to 60 A * h.
P S C-60 - http://www.meanwell.com/search/psc-60/default.htm
This solves all problems.

matrot2

Monitoring power outages? I have seen some scripts out there and i belive someone can give me a tip on how to do this from my RB800? I would like to get a email when i am on battery power and when i am restored. (voltage reports?) Thanks! You can do something like this: http://tandem.ck.ua/img/elec...

matrot2

OK but this is only a power supply with battery charger... How i can manage this system ? How this system alert me ? Support remote control (ex GMS/SMS) ? Here is an example of a slightly similar system: http://tandem.ck.ua/img/electronics/ups/ups_mt24B1sch.png For GSM signal I use is: http://oko.p...

matrot2

Hi, can anyone recommend a UPS system with: - E-Mail Alert - SMS Alert - SNMP - Web Interface - Big battery pack (Up to 100A) Regards. Convenient and affordable solution for batteries up to 60 A * h. P S C-60 - http://www.meanwell.com/search/psc-60/default.htm Must be connected in series, two such ...

matrot2

Simply change the UPS to AD-155, or something like that.
UPS monitor, for such an event:
http://tandem.ck.ua/ups_mtm-eng.php

matrot2

Here is an example of solving this problem: http://tandem.ck.ua/dude-eng.php

matrot2

How is this done, componet change or preset adjustment?

We must not forget that the effective capacity reduced to 50 watts when charging the battery.

matrot2

Dear all The system worked fine for the last 6 months with no problems at all, only for the last two weeks I am facing a frustrating problem, the whole network crash suddenly, ping from usualy is 1 ms between the bases suddenly become 800ms then 2000 ms and then time out or destination host unreach...

matrot2

The problem arises that if you want to rise the voltage at battery terminals to 27,2-27,3V, you have to also increase the output rail voltage (that is the simple way), which then becomes ~28,1V which isn't what you want with most RouterBoards, since their specification tells you shouldn't apply mor...

matrot2

Yeah, I've looked at those. The problem, is that the wiki tells me that I can monitor it directly using an appropriate serial cable.

Without cable. UPS needed AD-55 or AD-155.

matrot2

Maybe this will help you.
http://tandem.ck.ua/ups_mtm-eng.php

matrot2

Why not try a AD-55 or AD-155? Examples here: http://tandem.ck.ua/ups_mt-eng.php That is a single PSU there is no redundancy For important sites, I put a separate (redundant) power supply. He is completely galvanically isolated. This is to ensure that at risk he was alive. Connection manually. http...

matrot2

Why not try a AD-55 or AD-155?
Examples here: http://tandem.ck.ua/ups_mt-eng.php

matrot2

Can anybody recommend a hybrid solar/wind charge controller for charging the battery bank, I have not seen one that can be remote monitor the charging status of the both wind or solar? for example a possible senario; if the solar panel was damaged and at the time the turbine was supplying enough to...

matrot2

For details on configuring Dude to work with the UPS monitor, Eng. - http://tandem.ck.ua/dude-eng.php

matrot2

I have problems with English.
UPS should be without breaking the food chain.
For example : http://www.meanwelldirect.co.uk/product ... efault.htm, or http://www.meanwelldirect.co.uk/product ... efault.htm

matrot2

Hello all,

I have the above mentioned router. I have it on a UPS, but every once in a while it will lose power. I have to unplug and replug it several times to get it to come back on.

Does this sound like a power supply issue or a problem with the router itself?

Thanks.

UPS is used online?

matrot2

Thanks, it works.

matrot2

string_compare compares two strings, returns 0 if equal Probes: name: test_compare1 available: 1 error: string_compare("111","111") name: test_compare2 available: 1 error: string_compare("111","222") name: test_compare3 available: 1 error: string_compare(&quo...

matrot2

Witch UPS models are suppoprted by RouterOS? I have sucefully connected and installed Cyberpower Value 600E.other upses are not recognized by MT.

You can apply this solution. http://tandem.ck.ua/ups_mtm-eng.php

matrot2

Hi. Here is an example. Functions: name: test_function code: "aaa" Probes: name: test_probe1 available: 1 error: test_function() name: test_probe2 available: 1 error: if (test_function()="bbb","bbb","not bbb") results: test_probe1 - aaa test_probe2 - bbb What ...

matrot2

Hi all, Are there any plans to produce a RouterBOARD with redundant power inputs? Alternatively, is there a strategy others are using for a power supply with built in redundancy. Just had a RB fall over at a very unfortunate time in the night due to power supply failure. UPS http://tandem.ck.ua/ups...

matrot2

Hallo Everyone, I am still new to Mikrotik and there is a question that I have. We have 5 offices and I need to see when the power at my office is of, the Microtik can send you SMS Alerts on the network. I want to know can you monitor a device to see when the power is off? I see you can monitor a U...

matrot2

!!! What's new in 5.0rc6 (2010-Dec-23 13:33) Gobi users should change this setting or directory name; *) ups - support USB UPS on RB4xx as well; *) snmp - fix BER encoding for some INTEGER based values; *) snmp - provide proxy stats using SQUID-MIB; *) snmp - provide ups info using UPS-MIB; *) snmp ...

matrot2

Hello, i have connected a UPS with Serial Cable it called DB9 connector cable with RouterOS but in ups option its not working ..... is there any specific models of ups which will run with mikrotik routeros???? or is there any special cable to connect the ups to router os?? Arman It's here: http://t...

matrot2

Is anyone using a redundant PoE setup? I have two AC power sources that are far apart from each other. I would like to power a single routerboard with both power sources using POE. I am thinking of a 12-24v DC switch that I can inject 2 inputs and a single output. I know APC makes them for AC but n...

matrot2

Is anyone using a redundant PoE setup? I have two AC power sources that are far apart from each other. I would like to power a single routerboard with both power sources using POE. I am thinking of a 12-24v DC switch that I can inject 2 inputs and a single output. I know APC makes them for AC but n...

matrot2

Works perfectly! Thank You!
I if I schedule this every 5 minutes, when the power goes out I get log reminders that its down every 5 min But at least I am notified. (Been having lots of storms lately in my area).

This can be sdelatv Dude.
Rus.

http://tandem.ck.ua/dude.php

matrot2

RS232 interface so it can report voltages etc to the MT

It's here: http://tandem.ck.ua/ups_mtm-eng.php

matrot2

Similar device. 1. Number of connected clients - Up to 4 2. PoE voltage 18 ... 24 V, 700 mA 3. Maksimalnoya cable length of 30 ... 50 m 4. The possibility of switching to a central switch RoeE (eg RB-411) - is available. 5. Lightning protection - there are at each port. 6. Short circuit protection -...

matrot2

Your UPS-MT-monitor is designed for remote monitoring of power MikroTik routerboard, which have the supply voltage in range from 10V to 28V. (the models of MikroTik routerboard: B411/411A/411AH, RB433/433AH/433UAH, RB450/450G, RB33, RB493/493AH) UPS-MT-monitor, in conjunction with the AD-55 (AD-155)...

matrot2

Sending SMS to Dude for Ukraine: http://tandem.ck.ua/dude.php
Russian language: (.
Use http://translate.google.com
I hope this will be useful.

matrot2

Instead Smart using AD-55A (B), or AD-155A (B) (Mean Well) with UPS-monitor - http://tandem.ck.ua/ups_mtm-eng.php.

matrot2

For mikrotik have special devices UPS-MT-monitor - http://tandem.ck.ua/ups_mtm-eng.php
They work correctly with the UPS-MT (http://tandem.ck.ua/ups_mt-eng.php), which can be collected by hand.
Very reliable and proven alternative.

matrot2

I have 2 years came down with more than 30 pieces. R52H.
Symptoms are the same.
Several helps protect - RB-5 (2) (http://tandem.ck.ua/grz.php # rb)
Malfunction due to static electricity.

matrot2

This can be very useful for this:
http://tandem.ck.ua/ups_mtm-eng.php

matrot2

In our solutions, and the UPS battery is far from the RB-411 (433).
From 10 to 80 m.
For this case, your solution does not fit.
There can be no voltage 13,8 V on the battery.
Such inclusion of the battery, I think not correct.
Sorry.

matrot2

This decision is bad:
1. Insufficient charge the battery.
2. Deep discharge batteries. Small life of the battery.
3. No monitoring.

matrot2

You can use this solution for power backup feature. It's cheaper and smaller.

http://forum.mikrotik.com/viewtopic.php?f=3&t=39117

This decision is bad:
1. Insufficient charge the battery.
2. Deep discharge batteries. Small life of the battery.
3. No monitoring.

matrot2

There are other ways.
UPS - http://tandem.ck.ua/ups_mt-eng.php
UPS-monitor - http://tandem.ck.ua/ups_mtm-eng.php
Examples of scripts - http://tandem.ck.ua/prg/scripts.txt

matrot2

The most effective way:
http://tandem.ck.ua/ups_mt-eng.php + http://tandem.ck.ua/ups_mtm-eng.php

matrot2

From APC UPS work is not convenient if PoE cable length greater than 5 meters. I am impressed by this: http://tandem.ck.ua/ups_mtm-eng.php http://tandem.ck.ua/ups_mt-eng.php This a good product, but my UPS is within the same enclousure as the router so cable length is fine. I can see all the data i...

matrot2

why do you need this? example? did you know that the Dude can get results of any command even if there is no OID for it? I have been trying to find information on using the Dude to do just this, but can not acheive success. I have an APC UPS connected using USB, I have the UPS Package installed and...

matrot2

Mikrotik only supports UPS APC.
About UPS-monitor for Mikrotik: http://tandem.ck.ua/ups_mtm-eng.php

matrot2

Hi. Why not buy a really cheap device, like a wifi router, power that from the mains, and ping it from your mikrotik ? When the mains goes off, your MT will be on UPS power, and the pings will stop. Use Netwatch to send you an email or something. For a very cheap device requires an additional switc...

matrot2

We install RB very close to the antenna. UPS for 230 sometimes crash, then we use the AD-55 or AD-155 - http://tandem.ck.ua/ups_mt-eng.php. Monitoring food http://tandem.ck.ua/ups_mtm-eng.php. UPS-MT-monitor can also control the power, if RB411 (433) does not want to respond (hangs). Nice and neat ...

matrot2

We install RB very close to the antenna.
UPS for 230 sometimes crash, then we use the AD-55 or AD-155 - http://tandem.ck.ua/ups_mt-eng.php.
Monitoring food http://tandem.ck.ua/ups_mtm-eng.php.
UPS-MT-monitor can also control the power, if RB411 (433) does not want to respond (hangs).

matrot2

We did not use MEANWELL ADD-155b.
We use the AD-55A (B) and AD-155A (B).
Problems with power do not have.

matrot2

There are other ways.
UPS - http://tandem.ck.ua/ups_mt-eng.php
UPS-monitor - http://tandem.ck.ua/ups_mtm-eng.php
Examples of scripts - http://tandem.ck.ua/prg/scripts.txt

matrot2

http://tandem.ck.ua/prg/scripts.txt
dude-script will show later

matrot2

http://tandem.ck.ua/ups_mte-eng.php
UPS-MTЕ-12(24) $22

matrot2

matrot2

Just to post our experiences.... previously our RB532 bts's was powered with 18V-7A battery with 3A charger power supply and it only last max 2 hours. about a month ago, we change the power supply with 12V-14A battery with 3A charger and seems it can last untill 4 hours. The above RB532 are filled ...

matrot2

I think that the cheap and good way how to slove this is to buy come offline UPS and connect RB directly to the battery. UPS will make sure the battery is still charged. Or you can buy some big 12V battery (car starter battery) and some good battery charger with storage charge function and you have...

matrot2

Remote monitoring of UPS-MT-12 in real time.
http://tandem.ck.ua/soft_apps.php

matrot2

RB consumes pulse current.
If the voltmeter shows 12 - not always so.
Better use additional phantom power.

matrot2

Or use special UPS.
http://tandem.ck.ua/ups_mt-eng.php

Mikrotik does not yet support SNMP module UPS!!
http://forum.mikrotik.com/viewtopic.php ... mp#p161494

matrot2

Mikrotik Response: "Thank you very much for the request.
Currently such options are not available over SNMP, but we added these
features to our todo list. "

matrot2

English version:
http://tandem.ck.ua/ups_mtm-eng.php

matrot2

Excuse.
I was on rest. Tomorrow I will give answers.

matrot2

The English page will be 13.07. 2009.
I will inform you.

matrot2

UPS and UPS- monitor.
Unfortunately, not my idea.

http://local.com.ua/forum/index.php?showtopic=15362

matrot2

There is ready decision UPS and UPS monitor for a mikrotik.
http://tandem.ck.ua/ups_mtm.php
http://local.com.ua/forum/index.php?showtopic=15362

matrot2

http://tandem.ck.ua/ups_mtm.php http://i062.radikal.ru/0904/86/b8e45901b98d.jpg http://local.com.ua/forum/index.php?showtopic=15362 http://s48.radikal.ru/i121/0906/14/c7e1bd8e3486.jpg The answer of the mikrotik: "Thank you very much for the request. Currently such options are not available over...

Search found 79 matches