Community discussions

MikroTik App

Search found 69 matches

by clarkstyx
Thu Oct 10, 2013 3:11 pm
Forum: Wireless Networking
Topic: Mikrotik RB1100 AH as WLAN Controller
Replies: 2
Views: 1301

Re: Mikrotik RB1100 AH as WLAN Controller

thanks! :D
by clarkstyx
Thu Oct 10, 2013 2:15 pm
Forum: Wireless Networking
Topic: Mikrotik RB1100 AH as WLAN Controller
Replies: 2
Views: 1301

Mikrotik RB1100 AH as WLAN Controller

Hi,

Can the Mikrotik RB1100 AH be used as WLAN controller? If yes, which AP's are supported? Are 3rd party AP supported? If yes, can you please post the link for instructions? Thanks.
by clarkstyx
Sun Sep 22, 2013 3:28 pm
Forum: Beginner Basics
Topic: 6 PPPoe Wan and 4 Lan
Replies: 2
Views: 849

Re: 6 PPPoe Wan and 4 Lan

anyone?
by clarkstyx
Sun Sep 22, 2013 11:46 am
Forum: Beginner Basics
Topic: 6 PPPoe Wan and 4 Lan
Replies: 2
Views: 849

6 PPPoe Wan and 4 Lan

I have 6 pppoe connections and I was able to configure all of them in RB2011il. The main goal is to combine some Pppoe connection and distribute it to multiple lans (4 LANS). pppoe1 = 100mbps pppoe2 = 100mbps pppoe3 = 40mbps pppoe4 = 40mbps pppoe5 = 40mbps pppoe6 = 40mbps pppoe1 + pppoe 2 = 200mbps ...
by clarkstyx
Sat Jun 11, 2011 11:17 am
Forum: General
Topic: port forward to server with rdp port 81xx not working
Replies: 3
Views: 8268

Re: port forward to server with rdp port 81xx not working

chain=dstnat action=dst-nat to-addresses=83.111.xxx.xxa to-ports=8200
protocol=udp dst-address=83.xxx.xxx.xx dst-port=8200
probably you want protocol=tcp
my guess ports 8100 and 8200 are firewalled in servers.

yeah , i tried doing tcp also but Im getting the same problem..
by clarkstyx
Wed Jun 08, 2011 3:17 pm
Forum: General
Topic: port forward to server with rdp port 81xx not working
Replies: 3
Views: 8268

port forward to server with rdp port 81xx not working

Hey guys, I have three servers. The first server, I can access it remotely thru RDP and port forwarding thru port 3389. The second server, i changed the RDP port to 8100 and the third one is 8200. With these two servers even with the proper dst-nat configuration , I am unable to remote access the 2 ...
by clarkstyx
Wed Nov 10, 2010 8:17 am
Forum: Scripting
Topic: Needed Dyndns script for 4.12
Replies: 1
Views: 839

Needed Dyndns script for 4.12

Hi there, I have RB433 with v4.12 but the script in wiki seems to be not working,below is the script I used. # Define User Variables :global ddnsuser "DYNDNSUSER" :global ddnspass "DYNDNSPASS" :global ddnshost "DYNDNSHOST" # Define Global Variables :global ddnsip :global ddnslastip :if ([ :typeof $d...
by clarkstyx
Mon Oct 05, 2009 3:20 pm
Forum: The User Manager
Topic: Credit time. When it starts counting?
Replies: 7
Views: 2751

Re: Credit time. When it starts counting?

is there anyway that the counter will stop as soon as the customer logs out? I dont see the purpose of logging out if time continues running.
by clarkstyx
Tue Sep 22, 2009 7:29 pm
Forum: Beginner Basics
Topic: best vpn to use using dynamic dns
Replies: 5
Views: 2392

Re: best vpn to use using dynamic dns

I don't think it matters which vpn you want to use with a dynamic dns. You just need a script, that regularly checks if the remote dynamic ip has changed, and then edits the config. If you want, I can post my script for openvpn. sure can you post it please? right now im using change-ip as my dynami...
by clarkstyx
Tue Sep 22, 2009 2:28 pm
Forum: Beginner Basics
Topic: best vpn to use using dynamic dns
Replies: 5
Views: 2392

best vpn to use using dynamic dns

guys,can anyone tell me which among the types of vpn will work best with dynamic dns or can be used to setup dynamic to dynamic vpn, thank you
by clarkstyx
Sun Sep 13, 2009 6:12 am
Forum: Beginner Basics
Topic: getting errors on log
Replies: 2
Views: 769

Re: getting errors on log

thanks, I also tried disabling ssh and made my password a lot stronger.. :D
by clarkstyx
Sat Sep 12, 2009 11:15 pm
Forum: Beginner Basics
Topic: getting errors on log
Replies: 2
Views: 769

getting errors on log

guys ,im getting this recently 11:09:30 system,error,critical login failure for user tokend from 121.15.171.5 5 via ssh 11:09:37 system,error,critical login failure for user windowserver from 121.15 .171.55 via ssh 11:09:43 system,error,critical login failure for user appowner from 121.15.171 .55 vi...
by clarkstyx
Sat Sep 12, 2009 2:35 pm
Forum: General
Topic: Reset Not Working
Replies: 1
Views: 424

Re: Reset Not Working

try connecting RB over serial cable and follow instructions at http://gregsowell.com/?p=298
by clarkstyx
Sat Sep 12, 2009 11:22 am
Forum: Beginner Basics
Topic: Hanging WinboX
Replies: 2
Views: 597

Re: Hanging WinboX

please check mikrotiks hard disk, it might be reaching its limit already, i had the same problem,i had to remove dude and it freed a lot of memory and it worked fine.
by clarkstyx
Mon Sep 07, 2009 1:03 pm
Forum: Beginner Basics
Topic: How To Connect Mobile With Mikrotik?
Replies: 2
Views: 707

Re: How To Connect Mobile With Mikrotik?

is this what youre looking for? http://wiki.mikrotik.com/wiki/Sms
by clarkstyx
Sat Sep 05, 2009 8:17 am
Forum: Beginner Basics
Topic: Install on Ubuntu Win7 or dual boot
Replies: 4
Views: 1476

Re: Install on Ubuntu Win7 or dual boot

I suggest you use virtual machine software so you dont have to wipe out your hard disk
by clarkstyx
Thu Sep 03, 2009 1:55 pm
Forum: Beginner Basics
Topic: Skydsl
Replies: 2
Views: 584

Re: Skydsl

by clarkstyx
Thu Sep 03, 2009 12:54 pm
Forum: General
Topic: www service
Replies: 3
Views: 564

Re: www service

Hi, I`m having a problem on my mikrotik, www service don`t work. The problem start today when I Change the ETH1 IP, I try to restore a Backup but it still don`t work! When I write in a Terminal IP SERVICE PRINT I get INVALID in WWW Flags: X - disabled, I - invalid # NAME PORT ADDRESS CERTIFICATE 0 ...
by clarkstyx
Thu Sep 03, 2009 12:49 pm
Forum: Beginner Basics
Topic: PPPoe client need help
Replies: 4
Views: 972

Re: PPPoe client need help

my suggestion, use hotspot instead of pppoe clients,if you still insist in using ppoe client, try to read this http://www.mikrotik.com/documentation/m ... PPPoE.html
by clarkstyx
Thu Sep 03, 2009 12:23 pm
Forum: Beginner Basics
Topic: access CCTV from outside
Replies: 1
Views: 806

access CCTV from outside

I have this setup, Linksys-mikrotik-cctv , I can access CCTV using our local network by going to http://192.168.2.19 ,my mikrotik act as the dhcp server for our lan and it gets the ip 192.168.1.25 from linksys, I want to access it using my wan ip/ dynamic host name from outside, thanks.
by clarkstyx
Wed Sep 02, 2009 8:25 am
Forum: Beginner Basics
Topic: Mikrotik Learning Book
Replies: 24
Views: 37617

Re: Mikrotik Learning Book

yeah, how i wish there would be a training school for mikrotik in the Philippines
by clarkstyx
Sun Aug 30, 2009 9:03 pm
Forum: Beginner Basics
Topic: problems after implementing webproxy
Replies: 1
Views: 551

problems after implementing webproxy

Weve been having these issuues lately since I started activating mikrotik webproxy. First, for some websites, It will give you "gateway time out" with all those writings from webproxy, refreshing the page will allow you to go to the website, however they find it inconvenient,another thing is that so...
by clarkstyx
Sun Aug 30, 2009 8:55 pm
Forum: General
Topic: MIkrotik-advertise-Interval - Freeradius
Replies: 6
Views: 2149

Re: MIkrotik-advertise-Interval - Freeradius

Hi everybody! That's my first post here at this forum. I'm from Brazil and my English it not the best I wish it was... My doubt is about the Mikrotik-advertise-Interval attribute that comes from Freeradius. In the documentation is written that this attribute is a Integer number, but this number is ...
by clarkstyx
Thu Aug 27, 2009 11:41 am
Forum: Beginner Basics
Topic: accessing mikrotik everywhere using dynamic dns
Replies: 8
Views: 2151

Re: accessing mikrotik everywhere using dynamic dns

yes there is a public ip however,when i tried accessing MT remotely,its giving me the log-in page of my linksys router..I already disabled WAN or remote management of my linksys but still, im unable to get that screen
by clarkstyx
Tue Aug 25, 2009 12:21 pm
Forum: Beginner Basics
Topic: best way to setup VPN using changeip.com
Replies: 1
Views: 658

best way to setup VPN using changeip.com

Im planning to setup IPsec tunnel to connect to offices using changeip.com. Since I dont have static ip, Im finding a way of using the free hostname to setup VPN, is there any way? thanks?
by clarkstyx
Tue Aug 25, 2009 11:07 am
Forum: General
Topic: Newsletter #19
Replies: 20
Views: 3599

Mikrotik at DUBAI

I believe that Mikrotik will be participating at The GITEX TECHNOLOGY WEEK this October 18-22 and i cant wait. Our company is planning to implement mikrotik around UAE and I believe that no one has done that yet.Your visit to this country will mark a new beginning for MT technology and I believe tha...
by clarkstyx
Tue Aug 25, 2009 8:33 am
Forum: Beginner Basics
Topic: accessing mikrotik everywhere using dynamic dns
Replies: 8
Views: 2151

Re: accessing mikrotik everywhere using dynamic dns

will you be able to access it even if mikrotik is behind an ADSL router and im just using MT as firewall?
by clarkstyx
Mon Aug 24, 2009 7:35 pm
Forum: Beginner Basics
Topic: accessing mikrotik everywhere using dynamic dns
Replies: 8
Views: 2151

accessing mikrotik everywhere using dynamic dns

For some routers like linksys, you can enable wan management and access it remotely using its dynamic dns or wan ip address, for mikrotik, can we also do that? I believe that mikrotik supports dynamic dns either by changeip or everywhereip by just applying the scripts,would that be enough? or do we ...
by clarkstyx
Mon Aug 24, 2009 2:13 pm
Forum: General
Topic: application enforcement on mikrotik
Replies: 1
Views: 331

application enforcement on mikrotik

Does mikrotik has application enforcement feature like sonic firewalls? example, my boss only wants the whole company to use IE 7 instead of other browsers such as firefox.. any idea?
by clarkstyx
Mon Aug 24, 2009 12:59 pm
Forum: Beginner Basics
Topic: cannot Block Google Talk
Replies: 1
Views: 881

Re: cannot Block Google Talk

I finally solved it, blocking only the port is not enought , so I added the dst address:209.85.229.125, blocked port 443 and 5222 and it gtalk is not working anymore.. I had to remove the L7 filter for jabber and gtalk since it didnt help.
by clarkstyx
Mon Aug 24, 2009 12:50 pm
Forum: General
Topic: IPsec working realy strange
Replies: 3
Views: 621

Re: IPsec working realy strange

yes you were right, in order for ipsec to work for new router os, you need to change the protocol to 254
by clarkstyx
Mon Aug 24, 2009 11:26 am
Forum: General
Topic: Can't find problem creating IPSec tunnel
Replies: 9
Views: 1355

Re: Can't find problem creating IPSec tunnel

after doing this configuration, should the computers from the local office be able to access resources or shared folder on remote office and vice versa?
by clarkstyx
Sun Aug 23, 2009 2:18 pm
Forum: Beginner Basics
Topic: cannot Block Google Talk
Replies: 1
Views: 881

cannot Block Google Talk

Im trying to block google talk but i am not able to succeed, heres what I did, disabled port 5222, still nogo, addeded gtalk regxp on L7 filter via winbox (^<stream:stream to="gmail\.com") also added jabber as well,also I disabled access to talk.google.com, is there any other things I need to do? th...
by clarkstyx
Sat Aug 22, 2009 8:02 am
Forum: Beginner Basics
Topic: cannot connect as ADSL pppoe client
Replies: 3
Views: 1872

cannot connect as ADSL pppoe client

Here's my setup, linksys modem(bridge mode) - MT - PC I was able to set my eth1 interface to dial out ppoe to my ISP and it says connect,masquerade to ether1 interface,enable DHCP server on my Eth2,setup default gateway but i cannot connect to the internet, please check my settings http://i28.tinypi...
by clarkstyx
Tue Aug 18, 2009 6:46 pm
Forum: General
Topic: sonicwall vs mikrotik
Replies: 4
Views: 1496

sonicwall vs mikrotik

can anyone tell me the advantages of using mikrotik over sonic firewalls? answers will be greatly appreciated, thanks
by clarkstyx
Tue Aug 18, 2009 6:55 am
Forum: General
Topic: RouterOs on virtual Machine
Replies: 2
Views: 1698

Re: RouterOs on virtual Machine

hi , is it possible to make a routerOs operating on Virtual Machine and connect it on the Network? because i have a problem, i have installing RouterOs on a Virtual Machine, but i cannot connect to the Network, i can ping IP address give to Virtual machine, but i cannot ping ip give to RouterOs. i ...
by clarkstyx
Tue Aug 18, 2009 6:48 am
Forum: General
Topic: Ethernet Card Problem
Replies: 1
Views: 453

Re: Ethernet Card Problem

I can not get the Mikrotik Router OS Network to work Question Description I installed the Router OS software (V 3.2.7), and than ran "/setup" command to setup ip address and gateway. ether0 IP: 192.168.0.250/255.255.255.0 Gateway: 192.168.0.1 After the setup, I pinged the local IP address 192.168.0...
by clarkstyx
Tue Aug 18, 2009 6:44 am
Forum: Beginner Basics
Topic: can i Connect mikrotik Router Directly
Replies: 4
Views: 811

Re: can i Connect mikrotik Router Directly

Hi , Every Body, can i Connect mikrotik Router Directly to Phone Cable Or Splitter without Adsl Modem ??? and How ?? for your situation, you need to use your adsl modem,set it up on bridge mode so it would pass the pppoe authentication on your mikrotik router,then follow the video, but if you dont ...
by clarkstyx
Mon Aug 17, 2009 11:21 am
Forum: Beginner Basics
Topic: questions in connecting mikrotik to adsl modem
Replies: 1
Views: 689

questions in connecting mikrotik to adsl modem

Ive read this article : http://wiki.mikrotik.com/wiki/How_to_Connect_your_Home_Network_to_xDSL_Line in my case, ill be setting it up as a pppoe client that gets authentication from my ISP, since I have an ADSL modem connected to it and my mikrotik doesnt have rj11 port, ill still be using my adsl mo...
by clarkstyx
Mon Aug 10, 2009 10:54 am
Forum: Beginner Basics
Topic: replacing adsl router with mikrotik router with ppoe
Replies: 2
Views: 1378

Re: replacing adsl router with mikrotik router with ppoe

Hi, can I connect the RJ11 to Eth1? No you can't. You need at last ADSL modem (with one rj11 and one rj45 port). Just connect MikroTik to rj45 port of ADSL modem and configure pppoe client on MikroTik's ethernet port connected to modem. best regards thanks for the quick response, so what i need to ...
by clarkstyx
Mon Aug 10, 2009 10:21 am
Forum: Beginner Basics
Topic: replacing adsl router with mikrotik router with ppoe
Replies: 2
Views: 1378

replacing adsl router with mikrotik router with ppoe

We will be replacing our linksys adsl router with routerboard 433ah,since the routerboard doesnt have adsl port,can I connect the RJ11 to Eth1? since we are using ppoe, I guess i should be setting up ppoe client on Eth1/PoE of the routerboard with the username and password from m ISP,configure masqu...
by clarkstyx
Wed Jul 29, 2009 9:38 pm
Forum: Scripting
Topic: script for dynamic dns ipsec vpn
Replies: 1
Views: 1964

script for dynamic dns ipsec vpn

i am planning to setup ip sec vpn tunnels between two remote offices however ill be using dydns.org as my dns/host provider,I believe that gradually,the public ip address changes and i believe that theres a script to refresh or update dns everytime the ip changes,something like every 5 minutes, can ...
by clarkstyx
Wed Jul 29, 2009 4:58 pm
Forum: General
Topic: CCTV
Replies: 1
Views: 474

Re: CCTV

Can anybody recommend a reasonably priced cctv camera solution for a security project I have been asked to quote for

thanks
ilax is what we always use..they have varieties of cctv cameras
by clarkstyx
Wed Jul 29, 2009 4:56 pm
Forum: Beginner Basics
Topic: I need to setup my mikrotik login
Replies: 2
Views: 550

Re: I need to setup my mikrotik login

I need to setup my mikrotik login page where my client login their user Id and Password,
How do I do that please I need help. :?
are you referring to hotspot?
by clarkstyx
Wed Jul 29, 2009 10:46 am
Forum: Beginner Basics
Topic: block all websites except for like 10 websites
Replies: 3
Views: 1028

Re: block all websites except for like 10 websites

thanks, that worked for me!!
by clarkstyx
Tue Jul 28, 2009 4:43 pm
Forum: Beginner Basics
Topic: block all websites except for like 10 websites
Replies: 3
Views: 1028

block all websites except for like 10 websites

Ive setup hotspot with radius and as able to block certain websites, the thing that I need to do right now is to block all websites (which is what I can do) and allow certain websites. To block all websites,i just entered *.* on DST host and I was successful in blocking everything, on web proxy, I t...
by clarkstyx
Tue Jul 28, 2009 2:02 pm
Forum: Beginner Basics
Topic: Setting up Hotspot without the use of RADIUS
Replies: 24
Views: 4842

Re: Setting up Hotspot without the use of RADIUS

do you have a wireless card installed on your routerboard?
by clarkstyx
Tue Jul 28, 2009 1:22 pm
Forum: Beginner Basics
Topic: help in setting up hotspot to a corporate company (1k users)
Replies: 1
Views: 477

Re: help in setting up hotspot to a corporate company (1k users)

i was able to answer my own question, heres what I did, I created 3 different ip address pools, one for manager,employees and for ITs,created hotspot user profiles with corresponding pool names, then created users assigning the user profiles that I created. So ,after creating all the users, I set up...
by clarkstyx
Mon Jul 27, 2009 4:24 pm
Forum: Beginner Basics
Topic: help in setting up hotspot to a corporate company (1k users)
Replies: 1
Views: 477

help in setting up hotspot to a corporate company (1k users)

Here's what I have done, I was able to manage to create hotspot user with their own IP addresses and with those IP address, I can block or put some restrictions on those IP addressess or address pool, right now im thinking that its only ideal for small business environments,what if I have to impleme...
by clarkstyx
Sun Jul 26, 2009 4:43 pm
Forum: The User Manager
Topic: cannot access user manager
Replies: 2
Views: 1085

Re: cannot access user manager

its ok,I can access it right now,its only the hotspot which is preventing me to access it,by disabling the hotspot or assigning different ip pool, I can access user manager
by clarkstyx
Tue Jul 21, 2009 5:16 pm
Forum: Beginner Basics
Topic: creating groups with different internet access restrictions
Replies: 0
Views: 427

creating groups with different internet access restrictions

Im planning to create groups using my mikrotik router,example, admin groups,can acces any websites and theres no limit in bandwith, "employee" group has limited access in some websites, "guest" group, minimal access to internet, something like that..im thinking of hotspot as an option but I can only...
by clarkstyx
Tue Jul 21, 2009 11:13 am
Forum: The User Manager
Topic: cannot access user manager
Replies: 2
Views: 1085

cannot access user manager

i have my hotspot setup with user manager,I cant seem to access user manager using http://19.168.1.1/userman where 192.168.1.1 is my router ip..I already have subscriber created and router add on user manager,is there anythis that i missed?
by clarkstyx
Sat Jul 18, 2009 6:41 am
Forum: Scripting
Topic: How to edit and delete added IP address
Replies: 12
Views: 29552

Re: How to edit and delete added IP address

try this one

router.Send("/ip/address/print");

after that it will give you the IP address and the value number on the left most side, usually it is "0"

you can try this

router.Send("/ip/address/remove/0");
by clarkstyx
Sat Jul 18, 2009 6:29 am
Forum: Beginner Basics
Topic: cannot access router using winbox
Replies: 2
Views: 641

Re: cannot access router using winbox

I can now access winbox, I forgot to change the network adapted to bridge and replicate physical connection..
by clarkstyx
Sat Jul 18, 2009 6:26 am
Forum: Beginner Basics
Topic: RB433 Help Needed
Replies: 9
Views: 1263

Re: RB433 Help Needed

i believe its a dns problem, try to setup your dns first, use the dns of your ISP..
by clarkstyx
Tue Jul 14, 2009 8:07 pm
Forum: Beginner Basics
Topic: cannot access router using winbox
Replies: 2
Views: 641

cannot access router using winbox

I installed routeros on vmware and after that, i cannot access myrouter os using winbox, I dont have serial console so the only way I can access it is either via ftp or winbox
by clarkstyx
Tue Jul 14, 2009 4:23 pm
Forum: Beginner Basics
Topic: upgrading router OS problem
Replies: 8
Views: 1173

Re: upgrading router OS problem

not yet, im unable to access it using winbox anymore,maybe its because I upgraded router OS using vmware and it was successful,however, I believe that it cannot work without the vmware mikrotik powered on, so what I did, I tried to reset it by putting metal into the golden part while turning it on,s...
by clarkstyx
Tue Jul 14, 2009 4:03 pm
Forum: Beginner Basics
Topic: upgrading router OS problem
Replies: 8
Views: 1173

Re: upgrading router OS problem

im currently using version 3.10 and im upgrading to 3.25
by clarkstyx
Tue Jul 14, 2009 2:17 pm
Forum: Beginner Basics
Topic: upgrading router OS problem
Replies: 8
Views: 1173

Re: upgrading router OS problem

you don't need to use Netinstall. Upgrade can be done by simple drag-and-drop to Winbox Files window. Download the new RouterOS package NPK file, drag it to Files window, and reboot the router.
if tried it already, but when i reboot, the OS remains the same,
by clarkstyx
Tue Jul 14, 2009 6:19 am
Forum: Beginner Basics
Topic: upgrading router OS problem
Replies: 8
Views: 1173

upgrading router OS problem

Im trying to upgrade the routerOS of my routerboard 433ah using netinstall,however the only harddisk that i can see is my computers hard disk,before,I can see the router as an option and now I cant see it. I also tried to drag the OS package using winbox on files and rebooted the router but the OS r...
by clarkstyx
Sun Jul 12, 2009 12:21 pm
Forum: Beginner Basics
Topic: how to restrict certain users on internet
Replies: 2
Views: 683

how to restrict certain users on internet

is there any way we can assign some specific IP on mikrotik to be able to connect to internet without restrictions and some IP that has limited access?
by clarkstyx
Sat Jul 11, 2009 8:06 pm
Forum: Beginner Basics
Topic: help in setting up mikrotik
Replies: 2
Views: 773

Re: help in setting up mikrotik

Uh, you forgot to input your public IP... :) You should set the IP for the interface that you're getting your internet connection from (your "public" interface) to the IP address given by your ISP. Also, have you done the NAT masquerading? IMHO, the easiest way would be to connect to the webbox and...
by clarkstyx
Thu Jul 09, 2009 8:00 am
Forum: RouterBOARD hardware
Topic: How to configure RB433ah as a Router
Replies: 6
Views: 1932

Re: How to configure RB433ah as a Router

Before you proceed, you need to find out what type of internet connection you have, its either pppoe which you need username and password on the modem to connect to internet,or DHCP which gets automatic ip from your ISP. Once you knew it already,remove the modem and linksys and replace it with the R...
by clarkstyx
Thu Jul 09, 2009 7:53 am
Forum: Beginner Basics
Topic: Basic router configuration for internet access
Replies: 3
Views: 1216

Re: Basic router configuration for internet access

i think you also need this one Configure firewall to protect your router: /ip firewall rule input add connection-state=invalid action=drop \ comment="Drop invalid connection packets" /ip firewall rule input add connection-state=established \ comment="Allow established connections" /ip firewall rule ...
by clarkstyx
Tue Jul 07, 2009 2:21 pm
Forum: Beginner Basics
Topic: help in setting up mikrotik
Replies: 2
Views: 773

help in setting up mikrotik

I was able to setup mikrotik but still I cant connect, here's what i did, i set the ip address on ether1(WAN)as 192.168.2.1/24,ether2 as 192.168.1.1/24 ,default gateway(ip add of my router) 192.168.2.1,dns server=dns of my ISP, is there anything i missed?
by clarkstyx
Sat Jul 04, 2009 7:02 am
Forum: Beginner Basics
Topic: how to setup mikrotik as a firewall
Replies: 2
Views: 2623

how to setup mikrotik as a firewall

I will be using mikrotik as a firewall, Im planning to make this setup,
modem-mikrotik(firewall)-router-switches-computer. Any other suggestions? Cause I will also block some websites and put some restrictions on our internet access. Thank you.
by clarkstyx
Mon Jun 29, 2009 9:45 pm
Forum: Beginner Basics
Topic: cannot access routeros nand
Replies: 2
Views: 584

Re: cannot access routeros nand

thank you for the answer, yes my baud rate is correct, however im using a serial to usb console, will that be an issue, one more thing, I also installed router os 3.25 on vmware and I can access the router configuration from there, does that mean that it supercedes the original operating system of t...
by clarkstyx
Mon Jun 29, 2009 12:15 pm
Forum: Beginner Basics
Topic: cannot access routeros nand
Replies: 2
Views: 584

cannot access routeros nand

Guys, i need help, im new in mikrotik, i have a mikrotik 433 board and I believe it already have router os built in to it, ive been trying to access it using serial console with the use of secure crt, I can connect to the router but its not showing me anything.. Ive tried using winbox and its not wo...