Community discussions

MikroTik App

Search found 274 matches

by conchalnet
Wed Jun 07, 2017 2:04 am
Forum: General
Topic: Problem with iPhone and Facebook login in Hotspot
Replies: 4
Views: 1043

Problem with iPhone and Facebook login in Hotspot

Hi, I'me trying to use the Facebook Login and when I connect to the Hotspot network with my iPhone and the login page is show I select Facebook button then I'm redirecting to FAcebook login page, than I receive the follow message: "Hotspot login cannot open the page because it could not establish a ...
by conchalnet
Wed Jan 25, 2017 1:41 pm
Forum: General
Topic: SNMP Bug on CCR1036 2s+ 8G
Replies: 0
Views: 276

SNMP Bug on CCR1036 2s+ 8G

Hi, The RouterOS doens't return the ifSpeed value of the sfp port with 10G module installed on it. The interface with snmp id #1 is the sfp1+ port that is running a 10G module. snmpwalk -Os -c public -v 1 10.99.99.1 ifSpeed ifSpeed.1 = Gauge32: 0 ifSpeed.2 = Gauge32: 1000000000 ifSpeed.3 = Gauge32: ...
by conchalnet
Tue Jan 17, 2017 3:14 pm
Forum: General
Topic: Renew IP address of PPPoE client
Replies: 10
Views: 1977

Renew IP address of PPPoE client

Hi, I need to change an IP address of one customer that is connected to our network throught a PPPoE server configurated on a CCR1036. But every time the customer connects the Mikrotik give him the same IP address! How can I force the Mikrotik to renew the IP address of PPPoE connections on every re...
by conchalnet
Tue Jan 03, 2017 12:28 am
Forum: General
Topic: Problem with SNMP ifSpeed on 6.37.3
Replies: 0
Views: 380

Problem with SNMP ifSpeed on 6.37.3

Hi, The RouterOS 6.37.3 is returning a wrong value for the OID ifSpeed. The router is a CCR-1036-8G-2S+ I've been used this OID to get the interface speed and monitoring the link status of the interface. Bellow you can see the results: # snmpwalk -Os -c public -v 1 192.168.0.8 ifDescr ifDescr.1 = ST...
by conchalnet
Mon Nov 30, 2015 10:08 pm
Forum: General
Topic: RouterOS 6.33 and dynamic simple queues
Replies: 1
Views: 521

RouterOS 6.33 and dynamic simple queues

Hello, We have a problem with the upload bandwidth control using dynamic simple queues with PPPoE authentication. The upload is always limited on 50mbps instead of 1024kbps configurated on the dynamic simple queue. I didn't found any information about a bug on the 6.33 version and nothing informing ...
by conchalnet
Wed Nov 25, 2015 3:14 pm
Forum: General
Topic: ROS 6.32.3 and PPPoE keepalived
Replies: 0
Views: 441

ROS 6.32.3 and PPPoE keepalived

Hello, I'm running the ROS 6.32.3 in a CCR1036-12G-4S and it's working as PPPoE server. Today I saw a very strange problem: if I disconnect the cable of the client that is connected on this PPPoE server the PPPoE user doesn't disconnect from the server, the username continues connected on the Active...
by conchalnet
Fri Nov 06, 2015 5:56 pm
Forum: General
Topic: Dynamic Address-list problema
Replies: 0
Views: 677

Dynamic Address-list problema

Hello, Today I had a strange problem with dynamic Address-List created by PPPoE authentication. I started to see a lot of the following message on RouterOS logs: could not add address list: already have such entry (6) I went to investigated the problem and saw the the IP Address that the customer wa...
by conchalnet
Tue Nov 03, 2015 1:44 am
Forum: Forwarding Protocols
Topic: Issues with OSPF
Replies: 4
Views: 4001

Re: Issues with OSPF

Thanks for the reply!

Yes the router are in production and I'm running 6.32.3 that is the last stable version of RouterOS, do you think that the 6.30.4 is a best choice for OSPF?
by conchalnet
Sun Nov 01, 2015 1:34 pm
Forum: Forwarding Protocols
Topic: Issues with OSPF
Replies: 4
Views: 4001

Issues with OSPF

Hello, I've two CCR1036 using the RouterOS 6.32.3 with last firmware. They are connected by optic fiber and running OSPF. Sometimes I've problems on the OSPF and it stops to work for a short period. The RouterOS logs these informations: 01:07:52 route,ospf,info Database Description packet has init b...
by conchalnet
Fri Aug 01, 2014 1:50 am
Forum: General
Topic: Cable SFP+ Cisco on CCR
Replies: 0
Views: 514

Cable SFP+ Cisco on CCR

Hello,

Does someone know if the cable SFP+ CAB-SFP-50CM (72-4254-01) works to connec two CCR1036?

PS: I didn't find the RouterBoard SFP+ cable on Brazil.

Thanks
by conchalnet
Mon Jul 07, 2014 9:36 pm
Forum: General
Topic: CCR1016-12S-1S+ question briding
Replies: 10
Views: 2088

Re: CCR1016-12S-1S+ question briding

If you need switch functionality, we have much lower cost device, the CRS series. Switching is wire speed, you don't need powerful Tilera CPU to do this.
Hello Normis, but do you have a switch with 12 SFP ports? It's very usefull for us.

Thanks
by conchalnet
Tue Jun 24, 2014 2:27 pm
Forum: General
Topic: CCR1036 working in 48VCC
Replies: 1
Views: 534

CCR1036 working in 48VCC

Hello,

Are there a way to power on a CCR using 48VCC?

Thanks

Fabrício
by conchalnet
Wed Jan 29, 2014 3:46 pm
Forum: RouterBOARD hardware
Topic: CCR1036-12G-4S and Winbox MAC Access
Replies: 24
Views: 9517

Re: CCR1036-12G-4S and Winbox MAC Access

Hello, did you solved the problem?

We have the same issue here! If we are using winbox on windows 7 we can't access the CCR by MAC Address.

Best regards
by conchalnet
Sat Jun 15, 2013 4:44 am
Forum: Forwarding Protocols
Topic: ospfv3 and ipv6 - Discarding packet: locally originated
Replies: 18
Views: 8622

Re: ospfv3 and ipv6 - Discarding packet: locally originated

The problem persists on version 6.0.
by conchalnet
Fri Nov 16, 2012 12:44 pm
Forum: General
Topic: Export compact freezing on RB110AHx2
Replies: 4
Views: 1298

Re: Export compact freezing on RB110AHx2

I think that mikrotik need to look for a solution because the PPPoE interfaces are dynamics and don't need to be exported. Unless you raise this as a support ticket, Mikrotik will not know it is a problem. You cannot guarantee that they read every post on here. If I was of some help, please raise m...
by conchalnet
Wed Nov 14, 2012 8:33 pm
Forum: General
Topic: Export compact freezing on RB110AHx2
Replies: 4
Views: 1298

Re: Export compact freezing on RB110AHx2

Is this is a PPPoE Server? If so... this is 'normal' :P It is trying to enumerate all the PPPoE client interfaces and export them. Which it then forces the RouterOS to go into 100% CPU and eventually the command takes so long to perform that it times out. Disable the PPPoE Interface, wait a few sec...
by conchalnet
Wed Nov 14, 2012 4:40 pm
Forum: General
Topic: [request] CoA for PPPoE/PPTP
Replies: 34
Views: 13663

Re: [request] CoA for PPPoE/PPTP

...bump...
Is there any news about the possible implementation of CoA?
I'm waiting some news about this ressource too!
by conchalnet
Mon Nov 12, 2012 4:04 am
Forum: General
Topic: Export compact freezing on RB110AHx2
Replies: 4
Views: 1298

Export compact freezing on RB110AHx2

Hello, I've some RB1100AHx2 on my network and I can't use the export compact on it. The command stop to respond and I need to close the terminal to stopp the command execution.

Does someone with this same problem? Is ther a solution?

thanks
by conchalnet
Thu Nov 08, 2012 9:06 pm
Forum: General
Topic: Forcing clients to get a different IP
Replies: 1
Views: 533

Forcing clients to get a different IP

Hello! My customers are complaining that always get the same IP address when a PPPoE connection is established. The IP address of the clients is never exchanged. Is there a way to force the mikrotik to use a different IP addresses from the IPPool each time that a PPPoE connection is established, as ...
by conchalnet
Wed Nov 07, 2012 11:34 pm
Forum: General
Topic: PPPoE disconnections
Replies: 0
Views: 442

PPPoE disconnections

Hello, I'm passing for a terrible experience in my network. From 15 days ago all clients disconnecting of PPPoE server at same time without any error message. My PPPoE Server is a Routerboard 1100AHx2 with 300 PPPoE sessions and I don't have packet loss between my customers and the PPPoE server. The...
by conchalnet
Sun Oct 28, 2012 11:01 am
Forum: General
Topic: Problem with export command in some RBs
Replies: 1
Views: 470

Problem with export command in some RBs

Hello, I've problems with export/export compact in some RBs afeter the 5.20 version.

The commando stay running for a long time and it doesn't stop. I don't know the right reason and I didn't able to associated the problem with a specific configuration.

Does someone is with the same problem?
by conchalnet
Mon Oct 15, 2012 1:03 am
Forum: General
Topic: [request] CoA for PPPoE/PPTP
Replies: 34
Views: 13663

Re: [request] CoA for PPPoE/PPTP

Do you have prevision to add PoE COA on 6.0 release???

it will be welcome!
by conchalnet
Thu May 10, 2012 10:21 pm
Forum: General
Topic: Vlan1 and ether on the same bridge
Replies: 2
Views: 1158

Re: Vlan1 and ether on the same bridge

What are you trying to achieve? Read this topic. http://forum.mikrotik.com/viewtopic.php?t=13486 I read this topic before post. I needo of the follow: I've 20 APs running mikrotik that are connected on the same interface of my main mikrotik everthing in bridge. Now I want to put each AP in a differ...
by conchalnet
Thu May 10, 2012 6:44 pm
Forum: General
Topic: Vlan1 and ether on the same bridge
Replies: 2
Views: 1158

Vlan1 and ether on the same bridge

I created the vlan1 with vland id 110 on the ether1 of my RB750 and I want to put the vlan1 and ether1 on the same bridge. But this don't work.

Can someone help me? How can I have the tagged and untagged traffic coming in one interface on the same bridge?

Thanks!
by conchalnet
Tue Mar 20, 2012 3:58 am
Forum: General
Topic: [request] CoA for PPPoE/PPTP
Replies: 34
Views: 13663

Re: [request] CoA for PPPoE/PPTP

COA messages are not supported by PPPoE at MikroTik RouterOS.
Only DM messages are supported for PPPoE.

We have no plans to make COA in near future.
Why not if you have it on hotspot??? I think that is not a very difficult job and a very usefull ressource for us.

I need of CoA on PPPoE too!
by conchalnet
Fri Mar 16, 2012 1:33 pm
Forum: General
Topic: Two radius server - what's the main one?
Replies: 7
Views: 1028

Re: Two radius server - what's the main one?

Are your radius servers not using the same data source? A quick chat with a few here at the mum and the concensus is that it does use the right order but noone has been able to shed any light on those few requests that make it through. Hi TheWiFiGuy, thanks for you reply! Yes, the both freeradius h...
by conchalnet
Fri Mar 16, 2012 11:20 am
Forum: General
Topic: Two radius server - what's the main one?
Replies: 7
Views: 1028

Re: Two radius server - what's the main one?

I was under the impression that it does respect the order as my seconday has very few hits. Have you tried increasing the timeout on thefirst in case its too short and hitting the second? Thanks for the reply, but I don't belive that is the order because the main Freeradius server is local on the s...
by conchalnet
Thu Mar 15, 2012 11:57 pm
Forum: General
Topic: Two radius server - what's the main one?
Replies: 7
Views: 1028

Re: Two radius server - what's the main one?

I was under the impression that it does respect the order as my seconday has very few hits. Have you tried increasing the timeout on thefirst in case its too short and hitting the second? Thanks for the reply, but I don't belive that is the order because the main Freeradius server is local on the s...
by conchalnet
Thu Mar 15, 2012 11:08 pm
Forum: General
Topic: Two radius server - what's the main one?
Replies: 7
Views: 1028

Two radius server - what's the main one?

Hello people, If I configure two radius server for ppp authentication the Mikrotik doesn't respect the order and make queries em both servers. Can I configure the main radius server and the secondary radius server for the Mikrotik just query the secondary if the main is out? PS: I don't want to use ...
by conchalnet
Fri Feb 17, 2012 1:27 am
Forum: General
Topic: ddns entry after pppoe authentication
Replies: 0
Views: 389

ddns entry after pppoe authentication

Hello, can I do a static DNS entry after a PPPoE authentication?

I want to create dynamic DNS for all my customers with names like someone.mydomain.com after the customer authenticate on PPPoE server and get the dynamic IP.

Thanks in advance!
by conchalnet
Sat Jan 28, 2012 11:47 am
Forum: General
Topic: Redundant link between Mikrotik bridge devices - RSTP?
Replies: 10
Views: 13095

Re: Redundant link between Mikrotik bridge devices - RSTP?

@conchalnet Try Googling some info how exactly (R)STP works. Do not set same bridge 'priority' on every device. Bridge with lowest 'priority' becomes 'root bridge' during selection. If all your bridges have same 'priority' rooot bridge selection is based on bridge MAC-address. Port with lowest 'pri...
by conchalnet
Fri Jan 27, 2012 11:39 pm
Forum: General
Topic: Redundant link between Mikrotik bridge devices - RSTP?
Replies: 10
Views: 13095

Re: Redundant link between Mikrotik bridge devices - RSTP?

Hi, In Winbox you should go to Bridge 1. Double click on your bridge interface (bridge1 if Im not mistaken) 2. Click the STP tab 3. You'll find Prioty and change it as stated above Root Bridge should have lowest priority.. Or change from terminal: /interface bridge add admin-mac=00:00:00:00:00:00 a...
by conchalnet
Fri Jan 27, 2012 10:59 pm
Forum: General
Topic: Redundant link between Mikrotik bridge devices - RSTP?
Replies: 10
Views: 13095

Re: Redundant link between Mikrotik bridge devices - RSTP?

What do you say with "change bridge"? Change bridge 'priority' and port 'priority' parameters. 'Priority' makes possible to achieve fixed 'startup' configuration of your network (root bridge, designated ports, etc.) Configure RSTP on every device. HTH, Thanks again ditonet, but sorry me! Where can ...
by conchalnet
Fri Jan 27, 2012 8:00 pm
Forum: General
Topic: Redundant link between Mikrotik bridge devices - RSTP?
Replies: 10
Views: 13095

Re: Redundant link between Mikrotik bridge devices - RSTP?

Change bridge and port 'priority' parameter to force root bridge selection and force port to 'designated' role. Lower number = higher priority. For interfaces with the same speed same set same 'path cost' value. Useful link: http://en.wikipedia.org/wiki/Spanning_Tree_Protocol HTH, Thanks ditonet! W...
by conchalnet
Fri Jan 27, 2012 5:22 pm
Forum: General
Topic: Redundant link between Mikrotik bridge devices - RSTP?
Replies: 10
Views: 13095

Redundant link between Mikrotik bridge devices - RSTP?

Hello people! I want to create a backup link between 3 Mikrotiks where I've all the interfaces in Bridge. I'm thinking in use RSTP and than define different costs on the backup interfaces, but I can do it working well. See my topology: http://www.chlhost.com.br/rstp.jpg - I've the interface ehter1 a...
by conchalnet
Wed Jan 18, 2012 9:32 pm
Forum: Forwarding Protocols
Topic: Redundancy using BGP+OSPF
Replies: 2
Views: 1445

Re: Redundancy using BGP+OSPF

No one can help me with this???
by conchalnet
Fri Jan 13, 2012 2:43 pm
Forum: Forwarding Protocols
Topic: Redundancy using BGP+OSPF
Replies: 2
Views: 1445

Redundancy using BGP+OSPF

Hello people! This is the diagram of my network: http://www.chlhost.com.br/bgp-ingles.jpg Like you can see on the diagram I've 2 internet Link with two different Telcos and I've two BGP sessions with each of one of this Telcos on two RB1000 routers. On the BGP session with Telco1 I announce the foll...
by conchalnet
Tue Jan 10, 2012 11:18 pm
Forum: General
Topic: Solution for bandwith control with traffic usage
Replies: 1
Views: 490

Solution for bandwith control with traffic usage

Hello, I need to reduce the bandwidth of the customers after some bandwidth usage, for example, the user have a 2mbps internet link but if he download 10GB the bandwidth goes down to 500kbps. The customer just will have the full bandwidth again on the next month. Someone knows how to do this? Thanks!
by conchalnet
Thu Mar 03, 2011 6:07 pm
Forum: Scripting
Topic: PUtting the content of RSC file on the body of an email
Replies: 4
Views: 1359

Re: PUtting the content of RSC file on the body of an email

Thanks for your reply!

Do you know if I can send an email with 2 attachments?

Thanks

Fabrício
Hi, there is a limit of chars in the body. I don't remember how many... Sorry.
by conchalnet
Wed Mar 02, 2011 10:55 pm
Forum: Scripting
Topic: PUtting the content of RSC file on the body of an email
Replies: 4
Views: 1359

PUtting the content of RSC file on the body of an email

Hi all! I'm tring to put the content of the RSC file created by my script on the body of one email, but nothing happen. The email cames with the attachment and with the static text on the body, but without the RSC content. The script I'm using is: :local ident ([/system identity get name]); :local n...
by conchalnet
Mon Feb 21, 2011 9:00 pm
Forum: General
Topic: Backup with Wireless card configuration
Replies: 4
Views: 2854

Re: Backup with Wireless card configuration

Once you have a working configuration and want to copy that config to another MK device, this how i achive this, From terminal use: export file=backup (use any name you want i use backup) this will place a backup script of that MK device in your "Files" in my example "backup.rsc", drag to desktop t...
by conchalnet
Thu Dec 23, 2010 8:19 pm
Forum: General
Topic: Backup with Wireless card configuration
Replies: 4
Views: 2854

Backup with Wireless card configuration

Hi all,

Are there a form to do a full backup of my Mikrotik systems including the configurations of the wireless Cards?

Today if I upload a backup into a new RB (an identical RB to that I'm replacing) the wireless configuration is not applied.

Are ther a form to solve it?

Thanks

Fabrício
by conchalnet
Wed Nov 24, 2010 7:52 pm
Forum: General
Topic: Qos with DSCP + VoIP
Replies: 3
Views: 1328

Re: Qos with DSCP + VoIP

DSCP uses the higher 6 bits of the 8 bit (1 byte) TOS field in the IP header. Some implementations express DSCP based on just those 6 bits, which gives you values between 0 and 63. Other implementations express it based on the entire TOS byte, which gives you values between 0 and 255. To convert be...
by conchalnet
Wed Nov 24, 2010 7:31 pm
Forum: General
Topic: Qos with DSCP + VoIP
Replies: 3
Views: 1328

Qos with DSCP + VoIP

Hi all! I'm creating a QoS in my network to priorize some traffic and it's working fine, but I don't know very well how I must to do with the VoIP priorization. I've 40 ATAs in my network and these ATAs mark the packet with the value 0xB8 (184 in decimal). The manual of the ATA says that this is the...
by conchalnet
Mon Oct 11, 2010 3:39 am
Forum: General
Topic: Winbox don't connect - Retrieving preferences from
Replies: 5
Views: 3137

Re: Winbox don't connect - Retrieving preferences from

I can connect by MAC address without problem.

I can't connect using another ethernet interface, I've the same problem.

I can't connect from another PC, I've the same problem too.

Thanks

Fabrício
by conchalnet
Sat Oct 09, 2010 3:46 pm
Forum: General
Topic: Winbox don't connect - Retrieving preferences from
Replies: 5
Views: 3137

Winbox don't connect - Retrieving preferences from

Hi, I've a RB433AH running the 4.11 RouterOS version and from one week I can't connect on this RB using the Winbox, the system accepts the username and password but when I click to connect I receive the message Retrieving preferences from 192.168.0.1 and after some seconds I receive the message Rout...
by conchalnet
Wed Oct 06, 2010 5:51 pm
Forum: General
Topic: PPPoE + Radius
Replies: 9
Views: 1687

Re: PPPoE + Radius

Thanks Chupaka... I did it, I put the IP on the loopback interface and everthing works fine! Thanks. Now I'm with another small problem, I've latency when I use PPPoE authentication (with or without encryption). The client radio is a Ubiquiti Nanostation M5 radio. If I use fixed IP I've 1ms or 2ms. ...
by conchalnet
Tue Oct 05, 2010 12:30 am
Forum: General
Topic: latency in PPPoE connections
Replies: 3
Views: 1070

Re: latency in PPPoE connections

We had the same problem when using encryption with PPPoE sessions. When disabling encryption it resolved it for us. We used a RB450G as the PPPoE server and Ubiquity devices as clients. Thanks riaanmaree, But I don't use encryption in my PPPoE sections. I don't know what is the problem... I'm looki...
by conchalnet
Fri Oct 01, 2010 7:52 pm
Forum: General
Topic: latency in PPPoE connections
Replies: 3
Views: 1070

latency in PPPoE connections

Hi all! I started to use PPPoE last week in my customers that are using 5.8Ghz radios. With fixed IP Address I've the latency between 1ms and 5ms and when I setup PPPoE the latency is between 30ms and 40ms. The PPPoE server is a RB1000 and the server is running on the ether2. The local IP address is...
by conchalnet
Thu Sep 30, 2010 10:15 pm
Forum: General
Topic: PPPoE + Radius
Replies: 9
Views: 1687

Re: PPPoE + Radius

Hi xxiii, thanks again! I tried to configure the loopback interface. I did the follow: 1) I created a bridge with the name lobridge; 2) I cnofigurated the IP address on this interface; 3) I changed the PPPoE-server to run on this interface (lobridge); But the clients don't associate in pppoe-server ...
by conchalnet
Thu Sep 30, 2010 12:23 am
Forum: General
Topic: PPPoE + Radius
Replies: 9
Views: 1687

Re: PPPoE + Radius

I would suggest you create a loopback interface (see the wiki) with a valid IP, and use that as your local address. The local address should be a valid IP for the router, but no, it does not need to be in the same network. Depending on what you're doing with the router, the loopback IP can be used ...
by conchalnet
Wed Sep 29, 2010 4:10 pm
Forum: General
Topic: PPPoE + Radius
Replies: 9
Views: 1687

Re: PPPoE + Radius

PPPoE is point-to-point interface, there's no 'networks', only two addresses - and they can be anything you want. like local address is 192.168.255.0 and remote (user's) address is 1.2.3.1 Hi Chupaka, thanks for your reply! Then I don't need to put an IP address of the same network that is my clien...
by conchalnet
Mon Sep 27, 2010 9:21 pm
Forum: General
Topic: PPPoE + Radius
Replies: 9
Views: 1687

PPPoE + Radius

Hi all, I configurated a PPPoE server and it's working OK. But I've more than one network with the gateway in the same interface where is running the PPPoE server. I don't know how to configure the Local Address option in the profile of the PPPoE because each client will be in different networks. Th...
by conchalnet
Sat Sep 25, 2010 2:55 am
Forum: General
Topic: PPPoE + Radius + Mikrotik-Rate-Limit
Replies: 0
Views: 853

PPPoE + Radius + Mikrotik-Rate-Limit

Hi all, I configurated a mikrotik as pppoe-server and I made it to autenthication the connection on freeradius. Everthing is OK, the clients can authenticate, I saw the mikrotik receiving the radius parameters (from radreply table) bellow: Mikrotik-Rate-Limit Mikrotik-Address-List Framed-IP-Address ...
by conchalnet
Thu Jun 17, 2010 2:57 pm
Forum: General
Topic: Reducing the bandwidth after an amount of traffic
Replies: 6
Views: 949

Re: Reducing the bandwidth after an amount of traffic

1) Yes, HotSpot MAC-authentication is completely the same as HotSpot username/password authentication (from RADIUS point of view). Set login-by=mac, use MAC-address as HotSpot username. 2) Yes, you can do it. What is the problem? Set /ppp aaa to use RADIUS and setup RADIUS server properly. Ok I kno...
by conchalnet
Thu Jun 17, 2010 4:13 am
Forum: General
Topic: Reducing the bandwidth after an amount of traffic
Replies: 6
Views: 949

Re: Reducing the bandwidth after an amount of traffic

Additionally, Time is available at /queue simple, you can directly create queue, which is working only for the specific time. When /queue tree is used, time is available at /ip firewall mangle. For the amount of traffic, it is only possible with scripts or using AAA (HotSpot with RADIUS server). Hi...
by conchalnet
Tue Jun 01, 2010 5:32 pm
Forum: General
Topic: Mikrotik-Advertise-URL with PPPoE environment
Replies: 12
Views: 14660

Re: Mikrotik-Advertise-URL with PPPoE environment

maybe HTTP Referer?
Hi Chupaka, the $_SERVER["HTTP_REFERER"] comes empty on php script when the page is redirected by the Mikrotik web-cache.

Best regards

Fabrício
by conchalnet
Tue Jun 01, 2010 2:08 pm
Forum: General
Topic: Reducing the bandwidth after an amount of traffic
Replies: 6
Views: 949

Reducing the bandwidth after an amount of traffic

Hi all,

I want to reducing the speedy of my customers after some amount of traffic in one day and increase the bandwidth again after the midnight.

How can I do it?

Thanks

Fabrício
by conchalnet
Mon May 31, 2010 2:15 pm
Forum: The Dude
Topic: SMS notification
Replies: 8
Views: 2791

SMS notification

Hi all!

My mobile carrier don´t have a email->sms gateway and I need to send sms notification for some mobile phones when some services is down.

How can I do it? Can I connect a mobile phone to the RB to send SMS message? Is this possible?

Regards,
Fabrício
by conchalnet
Fri May 28, 2010 11:29 pm
Forum: General
Topic: Mikrotik-Advertise-URL with PPPoE environment
Replies: 12
Views: 14660

Re: Mikrotik-Advertise-URL with PPPoE environment

Hi fewi, I liked very mucho of your solution and it works very well. I'm trying to redirect the traffic for one page with the original URL that the user had access. With this I can put something like "Click here to access your URL". Do you know if this is possible with this solution? Thanks in advan...
by conchalnet
Fri May 07, 2010 9:24 pm
Forum: General
Topic: Help with Bridge + VLAN
Replies: 3
Views: 701

Re: Help with Bridge + VLAN

Hi fewi

I put the vlan1 and the both wifi interfaces of my RB433ah on the same bridge. From rb1000 I can ping the ip that I've set on the vlan1 interface, but the client registred on the wifi interface (wich gateway is on rb1000) can't ping the internet.

Can you help me?

Regards,
Fabrício
by conchalnet
Fri May 07, 2010 7:15 pm
Forum: General
Topic: Help with Bridge + VLAN
Replies: 3
Views: 701

Help with Bridge + VLAN

Hi all, I've two 433ah working as AP with 2 wifi cards. This 433ah is connected on my switch (no configurable) through the eth1 interface. The wifi cards and eth1 are on the bridge1. I've my gateway (a rb1000) connected on the same switch throught the eth1 port. I want to isolate the traffic between...
by conchalnet
Fri May 07, 2010 1:31 am
Forum: General
Topic: Isolating traffic between bridges
Replies: 5
Views: 928

Re: Isolating traffic between bridges

Thanks Martini, but it's impossible to me... I'm talking in more than 1k clients

Regards

Fabrício
by conchalnet
Thu May 06, 2010 11:30 pm
Forum: General
Topic: Isolating traffic between bridges
Replies: 5
Views: 928

Re: Isolating traffic between bridges

Hi Martini, how can I disable the mac forwarding?

Best regards

Fabrício
by conchalnet
Thu May 06, 2010 7:44 pm
Forum: Scripting
Topic: Reseting counter of simple queues using API
Replies: 6
Views: 2426

Re: Reseting counter of simple queues using API

It's strange, I couldn't reset the counters using the API with PHP. Everthing works fine (I can add a simple queue, an address-list, etc) but I can't reset the counters... it's strange. I'm looking for a form to collect data of the clients traffic to create reports of usage than I think in read the ...
by conchalnet
Thu May 06, 2010 7:30 pm
Forum: General
Topic: Isolating traffic between bridges
Replies: 5
Views: 928

Isolating traffic between bridges

Hi all! I've a structure with 6 RouterBoards each one with two wireless cards and connected by eth1 to my switch. All of them are configurated as bridge with the eth1 and the boths wireless interfaces on the bridge ports. The customers of the same wireless card cant see each other because of the "De...
by conchalnet
Wed May 05, 2010 1:37 am
Forum: Scripting
Topic: Reseting counter of simple queues using API
Replies: 6
Views: 2426

Re: Reseting counter of simple queues using API

I checked the PHP API and it's ok, I couldn't reset the counter using the API and I don't know why.

I'm able to read the counters but not to reset then.

Best regards
by conchalnet
Fri Apr 30, 2010 7:48 pm
Forum: General
Topic: Is this possible with bridges?
Replies: 1
Views: 532

Is this possible with bridges?

Hi all! I've 4 mikrotiks working as AP, each one with a wireless card (AP) and a ethernet port on the same bridge. Those Mikrotiks are connected switch. On this switch I've a 4th mikrotik (main mikrotik) that is the router of this network. I want to eliminate all the traffic between the mikrotiks th...
by conchalnet
Fri Apr 02, 2010 2:42 am
Forum: Scripting
Topic: Reseting counter of simple queues using API
Replies: 6
Views: 2426

Reseting counter of simple queues using API

Hi, I'm making a script that colect the traffic of simple queues using snmp. I need to reset all counters (set the counter to zero) of the simple queues after reding the queues but I'm no able to do this remotly. I'm trying to use the Router OS API (PHP) like bellow without success: $API = new route...
by conchalnet
Thu Apr 01, 2010 3:13 am
Forum: General
Topic: MRTG graphics and reports of the customers traffic
Replies: 4
Views: 1808

Re: MRTG graphics and reports of the customers traffic

Hi Chupaka, sorry by my ignorance, but I'm completly lost here. Traffic Flow is something really new to me and I need some help. I want to get the informations of my gateway (RB1000) and create some graphics with the traffic (in kbps) of each user. Before using a RB1000 as gateway I had a FreeBSD ma...
by conchalnet
Thu Mar 25, 2010 4:21 pm
Forum: General
Topic: DHCP - forcing clients to get a new IP
Replies: 9
Views: 10094

Re: DHCP - forcing clients to get a new IP

Thanks guys,

I'll send a message to the support requesting this resource.

Thanks

Fabrício
by conchalnet
Wed Mar 24, 2010 4:29 pm
Forum: General
Topic: DHCP - forcing clients to get a new IP
Replies: 9
Views: 10094

Re: DHCP - forcing clients to get a new IP

Hi fewi, thanks!

I prefer to use the simple queue because I've a lot of differents queues and some clients have burst.

Thanks

Fabrício
by conchalnet
Wed Mar 24, 2010 2:21 pm
Forum: General
Topic: DHCP - forcing clients to get a new IP
Replies: 9
Views: 10094

Re: DHCP - forcing clients to get a new IP

Hi fewy and Chupaka, The renewal of DHCP server of RouterOS makes a new query to radius server but the IP address of the client isn't renewed. Sorry I was unhappy with my question. My biggest problem isn't to renew the IP address of the client. My biggest problem is to recreate the simple queue of t...
by conchalnet
Thu Mar 18, 2010 4:44 pm
Forum: General
Topic: DHCP - forcing clients to get a new IP
Replies: 9
Views: 10094

DHCP - forcing clients to get a new IP

Hi all!

Are there a form to force all clients of my DHCP server to get a new IP address without reboot the client device?

Thank in advance!

Fabrício
by conchalnet
Thu Mar 18, 2010 4:32 pm
Forum: The Dude
Topic: Monitoring latency
Replies: 0
Views: 744

Monitoring latency

Hi all! I'm using "The Dude" to monitor my RBs with success. Now I would like that the device status would turn yellow (down partial) if I have latency on the link until the device. The ping test just inform me if the device is UP or DOWN. Can I configure the dude to monitor the intermediate status ...
by conchalnet
Thu Mar 11, 2010 5:14 pm
Forum: General
Topic: MRTG graphics and reports of the customers traffic
Replies: 4
Views: 1808

Re: MRTG graphics and reports of the customers traffic

Thanks for the answer Chupaka,

Do you have idea where can I get more informations about the use of Traffic Flow on the Mikrotik and NetFlow collector softwares?

Best regards

Fabrício
by conchalnet
Fri Mar 05, 2010 11:40 pm
Forum: General
Topic: MRTG graphics and reports of the customers traffic
Replies: 4
Views: 1808

MRTG graphics and reports of the customers traffic

Hi all! The client radios that I've in my customers don't have snmp support, than I can't do the mrtg graphics getting the data from the client radio. My main router is a RB1000 and I want to create a condition to do daily/weekly/monthly/yearly reports and MRTG Graphics of the traffic of each custom...
by conchalnet
Thu Jan 28, 2010 3:03 pm
Forum: General
Topic: ICMP - redirect host (5:1)
Replies: 10
Views: 17829

Re: ICMP - redirect host (5:1)

Hi guys, thanks for the replys!

I drop the response on the output chain of my RB1000.

I stranged it becau when the gw was a FreeBSD and never saw this message.

best regards!
by conchalnet
Wed Jan 27, 2010 11:01 pm
Forum: General
Topic: ICMP - redirect host (5:1)
Replies: 10
Views: 17829

ICMP - redirect host (5:1)

Hi all! I changed my FreeBSD gateway with a RB1000 (it's great). After change it I started to receive some strange message on ping response sometimes when I "ping" a customer from my AP (not from the RB1000) My structure is the follow: internet------RB1000(GW)--------- RB433H(AP) ------- customers S...
by conchalnet
Mon Jan 18, 2010 1:36 pm
Forum: General
Topic: Closed firewall and dynamic firewall rules
Replies: 9
Views: 2342

Re: Closed firewall and dynamic firewall rules

Thanks roadracer96 and fewi! In FreeBSD ipfw rules I've an option called 'ME'. With this option I can refer all IP address configurated on the server and I don't need to create a firewall rule for each IP address of the machine. Are there some rule like this on the Mikrotik RouterOS firewall? Thanks...
by conchalnet
Sat Jan 16, 2010 6:55 pm
Forum: General
Topic: Closed firewall and dynamic firewall rules
Replies: 9
Views: 2342

Closed firewall and dynamic firewall rules

Hi all, How can I do a closed firewall on mikrotik router OS? Today my gateway is a freebsd and the politic of the firewall is "closed", I've used a dynamic rules on freebsd to accept the conections started on my servers address. Now I'm replacing the server with a RB1000 and I want to keep the fire...
by conchalnet
Mon Jan 11, 2010 10:42 pm
Forum: General
Topic: Bandwidth management x QoS
Replies: 6
Views: 1285

Re: Bandwidth management x QoS

Hi Michael, thanks for you reply. I'll try to explain better... let's go: My AP is working as router. All the customers has individual simple queues to limit the bandwidth. Now I want to implement a efficient QoS using Queue Trees. My doubt is: - How is the traffic flow between the Queue Trees and t...
by conchalnet
Mon Jan 11, 2010 10:35 pm
Forum: General
Topic: DHCP + Radius + Accounting
Replies: 3
Views: 1264

Re: DHCP + Radius + Accounting

Hi Chupaka, thanks for the reply!

The DHCP creates the simple queues dinamically. Can I use those queues to get the traffic and sent it to my mysql server?

If yes do you know can I do this?

Best regards

Fabrício
by conchalnet
Tue Jan 05, 2010 11:08 pm
Forum: General
Topic: Bandwidth management x QoS
Replies: 6
Views: 1285

Re: Bandwidth management x QoS

Somebody can help me with this doubts?

Thanks
by conchalnet
Tue Jan 05, 2010 11:07 pm
Forum: General
Topic: DHCP + Radius + Accounting
Replies: 3
Views: 1264

DHCP + Radius + Accounting

Hi all, Can I do the accounting using radius of the traffic of my customers through the DHCP authentication? I don't use hotspot but I'm needing to know how much of bytes each customer is using and my customers don't have fixed IP address, than I can't creating a simple queue (the dhcp create one si...
by conchalnet
Thu Dec 31, 2009 9:18 pm
Forum: General
Topic: Bandwidth management x QoS
Replies: 6
Views: 1285

Re: Bandwidth management x QoS

Limit downloads at GW or AP and customer uploads at CPE if you want to save on wireless bandwidth. Thanks Michael! It's good and I'll do the bandwidth control (download/upload) in all my customers equipments. But now I'm with doubt about the QoS. I don't know if I'm going to have best results putti...
by conchalnet
Thu Dec 31, 2009 4:21 pm
Forum: General
Topic: Bandwidth management x QoS
Replies: 6
Views: 1285

Bandwidth management x QoS

Hi all! My AP is routed and it's the gateway of all customers that is registrated on the Wifi card. It works as DHCP server too and it makes the bandwidth control using individual Simple Queues created dynamically using the return of the freeradius on the moment of the DHCP request. Now I want to im...
by conchalnet
Thu Dec 10, 2009 3:25 pm
Forum: Wireless Networking
Topic: High latency
Replies: 7
Views: 1526

Re: High latency

Hi ejansson and popcorrin! Thanks for your reply! I make the bandwidth control using a simple queue for each customer (all customers have fixed IP address) and my customers don't "see" each other and they are distribuited in a 90 degrees sector in different distances of my AP (I've some customers a ...
by conchalnet
Tue Dec 08, 2009 2:29 pm
Forum: Wireless Networking
Topic: High latency
Replies: 7
Views: 1526

Re: High latency

Hi ejason, Don't. I'm not using nstream. My customers don't use Mikrotik Router OS, they has Edimax 7209Abg or Ubiquiti Bullet 2 as CPEs. On the AP I've a Routerboard runing RouterOS v4.3 (I updated it to try to solve the latency problem. The APs was runing 3.9 version before). The AP is configurate...
by conchalnet
Tue Dec 08, 2009 2:24 pm
Forum: Wireless Networking
Topic: Horizontal vs Vertical polarization
Replies: 7
Views: 4560

Re: Horizontal vs Vertical polarization

One more point to consider is that Vertical pole does penitrate light foliage better than horizontal.
Hi tgrand, sorry but I didn't understand your answer. What is "penitrate light foliage"?

Thanks

Fabrício
by conchalnet
Tue Dec 08, 2009 2:23 pm
Forum: Wireless Networking
Topic: Horizontal vs Vertical polarization
Replies: 7
Views: 4560

Re: Horizontal vs Vertical polarization

There is no right or wrong depends on your RF environment. As general rule H pol is quieter then Vpol as there are many other consumer devices that are V pol particularly on 2.4ghz. In most cases you have more limited power available when doing distribution, so typically H pol can often perform bet...
by conchalnet
Mon Dec 07, 2009 10:06 pm
Forum: Wireless Networking
Topic: Horizontal vs Vertical polarization
Replies: 7
Views: 4560

Horizontal vs Vertical polarization

Hi all, there some advantage between the horizontal and vertical polarization on an AP using a sectorial panel antenna of 60 degrees?

Is there a better choice to be made?

Best regards

Fabrício
by conchalnet
Mon Dec 07, 2009 10:01 pm
Forum: Wireless Networking
Topic: High latency
Replies: 7
Views: 1526

High latency

Hi all, I've a lot of problems with high latency in some APs. I'll show a example of on AP with problems: This AP is running in a RB433Ah with 2 R52H cards with sectorial panels antennas. I've problem in just one card, the second card is OK and don't show the problem. (I replaced the cards yet, but ...
by conchalnet
Mon Sep 28, 2009 10:55 pm
Forum: Wireless Networking
Topic: Ideal Signal Strength in a PMP 5.8Ghz wireless cell
Replies: 2
Views: 889

Ideal Signal Strength in a PMP 5.8Ghz wireless cell

Hi all,

I'm starting to implement my first 5.8Ghz. This cell will work with a RB433AH, a R52H and a setorial antenna (17dBi - 90 degrees).

I want to know what's the ideal Signal Strength (dBm) range to mantain my client radios into?

Best regards

Fabrício
by conchalnet
Tue Jun 30, 2009 12:06 am
Forum: Wireless Networking
Topic: WPA + Radius server
Replies: 1
Views: 704

Re: WPA + Radius server

Can anyone help me with this?

Regards
by conchalnet
Mon Jun 29, 2009 10:36 pm
Forum: Scripting
Topic: Script to send email of some registration info (ACK)
Replies: 1
Views: 2411

Script to send email of some registration info (ACK)

Hi all! I want to create a script that send me an email every time that my AP has clients registrated with an ACK-Timeout bigger than 60. With the script bellow I can disconnect all clients with a poor ack: :foreach i in=[/interface wireless registration-table find ack-timeout>45] do={ /interface wi...
by conchalnet
Tue Jun 23, 2009 7:02 pm
Forum: Wireless Networking
Topic: WPA + Radius server
Replies: 1
Views: 704

WPA + Radius server

Hi all, Today I've used a FreeRadius server to do the wireless authentication of my clients and I've a individual WEP key for each client. Now I want to migrated all the clients to use WPA instead of WEP but I want a different WPA key for each client. Can I have a different WPA key for each client A...
by conchalnet
Wed Jun 17, 2009 10:27 pm
Forum: General
Topic: Feature request: Wireless Auth + Simple Queue + Static ARP
Replies: 3
Views: 1384

Re: Feature request: Wireless Auth + Simple Queue + Static ARP

you may set interface arp=reply-only, use DHCP Server with add-arp-for-leases=yes, and return simple queue parameters to DHCP RADIUS request. so any user with static address will not function, the user with address obtained from DHCP will be shaped by dynamically created simple queue Hi Chupaka, Th...
by conchalnet
Wed Jun 17, 2009 10:14 pm
Forum: RouterBOARD hardware
Topic: RB1000 as network gateway
Replies: 1
Views: 639

RB1000 as network gateway

Hi all,

Today my gateway is a server running FreeBSD system and I'm thinking in migrate this server for a RB1000.

How many clients the RB1000 can have behind it?
How much traffic (in mbps and pps) this router board can manage?

Regards

Fabrício F. Kammer
by conchalnet
Wed Jun 10, 2009 6:48 pm
Forum: General
Topic: Feature request: Wireless Auth + Simple Queue + Static ARP
Replies: 3
Views: 1384

Feature request: Wireless Auth + Simple Queue + Static ARP

Hi Mikrotik developement equip Today I do the wireless authentication using a Radius server and it's working fine for me, but it can work better for me if I the Router OS can create the follow configuration every time that a client is allowed to authentication in my AP: - A dynamic simple queue (lik...
by conchalnet
Tue Apr 14, 2009 5:28 pm
Forum: Wireless Networking
Topic: Problems with Hotspot
Replies: 0
Views: 402

Problems with Hotspot

Hi, I've some APs setup with hotspot and MAC authentication in a Freeradius server. The hotspot works fine but SOMETIMES the client see a login page, where he's asked about a login and password. This problem occours sometimes and to resolve the problem and the client start to browser I need to delet...
by conchalnet
Tue Apr 14, 2009 5:17 pm
Forum: Scripting
Topic: Remove all "auto.rsc" files via script
Replies: 3
Views: 2708

Re: Remove all "auto.rsc" files via script

thanks ayufan, it's the solution!

best regards!
by conchalnet
Mon Apr 13, 2009 4:41 pm
Forum: Scripting
Topic: Remove all "auto.rsc" files via script
Replies: 3
Views: 2708

Remove all "auto.rsc" files via script

Hi all, I'm interesting in remove all files that have the named finished by "auto.rsc" using a script. I tried to use the * as a name mask but it didn't work. I tried the follow forms: /file remove "*auto.rsc" :foreach i in=[/file find name="*auto.rsc"] do=[/file remove $i] How can I solve this? Tha...
by conchalnet
Mon Mar 30, 2009 6:14 pm
Forum: General
Topic: .auto.rsc - Auto delete
Replies: 1
Views: 517

.auto.rsc - Auto delete

Hi all!

Are there a form to the auto.rsc file be auto deleted after the execution?

Thanks in advance!

Fabrício
by conchalnet
Fri Jun 20, 2008 3:13 pm
Forum: General
Topic: Hotspot with MAC Auth - How to define the Simple Queue Name
Replies: 8
Views: 2561

Re: Hotspot with MAC Auth - How to define the Simple Queue Name

Sergejs, the RouterOS don't request the username/password because the client was authenticated yet by the MAC Address. Are you talking about wireless or HotSpot ? For HotSpot the reason could be, - there is no use-radius for HotSpot profile; - there is no service=hotspot at RADIUS client configurat...
by conchalnet
Thu Jun 19, 2008 4:40 pm
Forum: General
Topic: Hotspot with MAC Auth - How to define the Simple Queue Name
Replies: 8
Views: 2561

Re: Hotspot with MAC Auth - How to define the Simple Queue Name

If RouterOS don't request username/password from RADIUS,

- there is no use-radius for HotSpot profile;
- there is no service=hotspot at RADIUS client configuration.
Sergejs, the RouterOS don't request the username/password because the client was authenticated yet by the MAC Address.

Regards
by conchalnet
Thu Jun 19, 2008 3:43 pm
Forum: General
Topic: Hotspot with MAC Auth - How to define the Simple Queue Name
Replies: 8
Views: 2561

Re: Hotspot with MAC Auth - How to define the Simple Queue Name

Have you enabled HTTP-Chap authentication method in HotSpot profile ? Hi sergejs, thank you for the reply. If I enable the MAC and HTTP-Chap methods and I've the MAC address of the client on the FreeRadius database the RouterOS don't request the username/password. I want to implement the username/p...
by conchalnet
Wed Jun 18, 2008 4:50 pm
Forum: General
Topic: Hotspot with MAC Auth - How to define the Simple Queue Name
Replies: 8
Views: 2561

Re: Hotspot with MAC Auth - How to define the Simple Queue Name

Thank you sergejs... I'll keep the simple queue name default of the hotspot... I tested yesterday the hotspot + wireless mac authentication and the bandwidth control is OK now. Thanks! Can you help with another doubt? I want that ALL users have the MAC authenticated in the wireless (just will associ...
by conchalnet
Wed Jun 18, 2008 3:21 pm
Forum: General
Topic: Hotspot with MAC Auth - How to define the Simple Queue Name
Replies: 8
Views: 2561

Hotspot with MAC Auth - How to define the Simple Queue Name

Hi all, Today I'm using the hotspot to do the MAC Authentication of my customers, but the simple queue is created with a name like this: <hotspot-00:EE:BB:99:33:FF>. Can I send (from the radius server) a name to be displayed in place of the default name? I want something to be easy to locate the cus...
by conchalnet
Fri Mar 07, 2008 11:40 pm
Forum: Wireless Networking
Topic: Radius + Mac Autentication + Hotspot + Bandwidth control
Replies: 0
Views: 929

Radius + Mac Autentication + Hotspot + Bandwidth control

Hi all, I configured the FreeRadius to do the Wireless MAC Authentication and the Hotspot MAC Authentication. Everything works fine until I put the Mikrotik-Rate-Limit on the radreply table and the FreeRadius starts to send this parameter to the Mikrotik. The hotspot creates the dynamic queue fine, ...
by conchalnet
Thu Feb 28, 2008 5:38 pm
Forum: Wireless Networking
Topic: Hotspot+Freeradius-Some users with password and anothers not
Replies: 0
Views: 797

Hotspot+Freeradius-Some users with password and anothers not

Hi all, I tested hotspot a lot and now I want to use it on my WISP but I've a lot of customers and I can't just start the hotspot and wait that the customer calls me ask about the username/password. I need to migrate the users slowly to hotspot. I've all my Mikoritks APs configurated to work with Fr...
by conchalnet
Wed Feb 27, 2008 10:51 pm
Forum: Wireless Networking
Topic: MAC Authentication on Radius and Signal-Strength-Range
Replies: 0
Views: 1087

MAC Authentication on Radius and Signal-Strength-Range

Hi all, The Mikrotik RouterOS has a parameter named Signal-Strength-Range on the access list. I think that this parameter is to allow the access to the AP of the clients that have the signal strength into this range. Is it right? But I don't use Access-List. I make the wireless authentication using ...
by conchalnet
Fri Feb 22, 2008 4:56 pm
Forum: Wireless Networking
Topic: Starting Hotspot with MAC authentication without impact
Replies: 0
Views: 686

Starting Hotspot with MAC authentication without impact

Hi all, I'm with problems to configure my first hotspot. Today I've the follow structure on my APs: RB333 2 R52H configurated as APs Bridge1 with the 2 R52H cards on the ports IP address 201.201.201.1 set on the bridge IP address 191.168.0.2 set on the ether1 The default gateway is 192.168.0.1 I've ...
by conchalnet
Fri Feb 08, 2008 9:28 pm
Forum: Wireless Networking
Topic: Hotspot - Username and MAC
Replies: 0
Views: 625

Hotspot - Username and MAC

Hi all, I'm an WISP and I want that my customers just logging in my hotspot if they are using the Radio that I installed and the Username/Password inserted on the radius, in other words, I want that each Username/Password has a MAC address associated with it. Is this possible? Can I configure it on ...
by conchalnet
Fri Feb 08, 2008 2:27 pm
Forum: Wireless Networking
Topic: WPA and Freeradius
Replies: 0
Views: 721

WPA and Freeradius

Hi all, I saw that the new version of RouterOS allows I'm to use individual WPA key for each client that associated on the Mikrotik AP. Today I'm using WEP individual keys that is checked on a Freeradius server. I want to migrate to individual WPA key, but I want that the key bee managed on my Freer...
by conchalnet
Wed Dec 26, 2007 2:27 pm
Forum: General
Topic: Strange firewall work
Replies: 0
Views: 414

Strange firewall work

Hi all, I made the follow configuration on 2 APs, one with Router OS 2.9.45 and other with Router OS 3.0rc13: 2 wireless cards configurated as AP (wlan1 and wlan2); 1 bridge configurated with the name bridge1 (with the use-ip-firewall=yes on the 3.0rc13); The 192.168.0.1 configurated on the bridge1;...
by conchalnet
Sun Sep 16, 2007 12:24 am
Forum: General
Topic: Hotspot configurations and another doubts
Replies: 1
Views: 602

Hotspot configurations and another doubts

Hi all, I'm configuring my first hotspot with Mikrotik and I'm with some problems. See bellow the configuration of my network: - I'm using Mikrotik 3.0rc4; - I'm making the wireless authentication of the MAC addresses on the FreeRadius - I'm making the hotspot authentication on a FreeRadius server; ...
by conchalnet
Wed Aug 15, 2007 8:46 am
Forum: General
Topic: Bandwidth control with Radius
Replies: 14
Views: 7515

Re: Bandwidth control with Radius

Hi Sergejs, This is the problem: I never used hotspot! I just made the wireless mac authentication on freeradius. And I'm trying to configure an hotspot without sucess. When I fineshed the setup the hotspot staid with a letter I (invalid) at the left side. I don't know what more I can do. Please mak...
by conchalnet
Tue Aug 14, 2007 5:57 pm
Forum: General
Topic: Bandwidth control with Radius
Replies: 14
Views: 7515

Re: Bandwidth control with Radius

Fabricio, note that you cannot run HotSpot on bridge, if remote interface is included to the bridge (you have to exclude this, either avoid HotSpot there, if bridged configuration is necessary). Hi Sergejs, Thanks again! I'm with difficult to configure the hotspot for MAC Authentication. Can you he...
by conchalnet
Tue Aug 14, 2007 5:55 pm
Forum: Wireless Networking
Topic: Log messages: disconnected, reassociating - DEAUTH ATTACK???
Replies: 13
Views: 3965

Re: Log messages: disconnected, reassociating - DEAUTH ATTACK???

Hi Sergejs,

Sorry by the portuguese on the forum!

I sent to you more informations about my problem with reassociantion throught the support email.

Did you see it?

Regards,

Fabrício
by conchalnet
Sat Aug 11, 2007 3:27 pm
Forum: General
Topic: Bandwidth control with Radius
Replies: 14
Views: 7515

Re: Bandwidth control with Radius

Hi Sergejs, Today I'm trying to configure the hotspot to do the MAC Authentication than I'm following your instructions: Firstly I configured the radius client: - Radius - Services: hotspot and wireless (that I'm using at now and I intend to saty using it). The radius services is working fine becaus...
by conchalnet
Sat Aug 11, 2007 3:50 am
Forum: Wireless Networking
Topic: Log messages: disconnected, reassociating - DEAUTH ATTACK???
Replies: 13
Views: 3965

Re: Log messages: disconnected, reassociating - DEAUTH ATTACK???

Fabrício, Im still waiting your call. :wink:
Me cadastra no seu msn
by conchalnet
Thu Aug 09, 2007 2:55 pm
Forum: Wireless Networking
Topic: Log messages: disconnected, reassociating - DEAUTH ATTACK???
Replies: 13
Views: 3965

Re: Log messages: disconnected, reassociating - DEAUTH ATTACK???

Hi Fabrício, my english is not very good, sorry. We already had this problem here and it was caused by a disloyal partner. We made the same with him until that he stopped the attack. Is difficult to appeal for the authorities and the laws of this area are very outdated or inexistent. Me mande uma m...
by conchalnet
Thu Aug 09, 2007 12:44 am
Forum: Wireless Networking
Topic: Log messages: disconnected, reassociating - DEAUTH ATTACK???
Replies: 13
Views: 3965

Re: Log messages: disconnected, reassociating - DEAUTH ATTACK???

HI npero, Thanks for you reply! The clients radios are Edimax EW-7209APG and everthing was working fine until last week when the Mikrotik's log starts to register this messages. I don't belive that the problem is on the client because this is ocourring with a lot of customers and all the problem sta...
by conchalnet
Wed Aug 08, 2007 2:58 pm
Forum: Wireless Networking
Topic: Log messages: disconnected, reassociating - DEAUTH ATTACK???
Replies: 13
Views: 3965

Re: Log messages: disconnected, reassociating - DEAUTH ATTACK???

Hi sergejs, Thanks again to reply my questions! I saw the wiki before to post the message here. But I looked on the station and everthing is OK. I didn't find anything wrong or with problem. I changed the customer radio, antenna and pigtail. How I said the quality of the signal is very good and the ...
by conchalnet
Tue Aug 07, 2007 10:51 pm
Forum: Wireless Networking
Topic: Log messages: disconnected, reassociating - DEAUTH ATTACK???
Replies: 13
Views: 3965

Log messages: disconnected, reassociating - DEAUTH ATTACK???

Hi all, I'm seeing a lot of the follow messages in the log of my Mikrotik AP: 00:4F:62:0B:CD:AC@AP1: disconnected, reassociating 00:4F:62:0B:CD:AC@AP1: connected 00:4F:62:0B:CD:AC@AP1: disconnected, reassociating 00:4F:62:0B:CD:AC@AP1: connected It's occurring with different mac address and the clie...
by conchalnet
Tue Jul 31, 2007 4:26 pm
Forum: General
Topic: Bandwidth control with Radius
Replies: 14
Views: 7515

Re: Bandwidth control with Radius

Thanks again sergejs, With this will the customers see some web page or will be transparent for then? There aren't any documentation with example about the MAC authentication with hotspot. If this work fine for me I'll write a document for the wiki. And in the wireless configuration? How do I config...
by conchalnet
Tue Jul 31, 2007 3:38 pm
Forum: General
Topic: Bandwidth control with Radius
Replies: 14
Views: 7515

Re: Bandwidth control with Radius

Thanks again sergejs, Today I don't use DHCP. All my customers have fixed IP address and I don't want to chage this. Is this a problem for hotspot? In my mikrotik that works as AP I've 2 wireless interfaces where my customers are associated and 1 ethernet interface that in linked with a 5.8Ghz radio...
by conchalnet
Tue Jul 31, 2007 2:22 pm
Forum: General
Topic: Bandwidth control with Radius
Replies: 14
Views: 7515

Re: Bandwidth control with Radius

Thanks sergejs, I'm thinking in use hotspot in my APs but I've a problem because all then have the interefaces configurated birdged. The gateway of my customers are in my office not in the towers. How do you suggest me to make the hotspot configuration? PS: I'm newbe in hotspot, I never work with th...
by conchalnet
Mon Jul 30, 2007 8:09 pm
Forum: General
Topic: Bandwidth control with Radius
Replies: 14
Views: 7515

Re: Bandwidth control

I tried to use Mikrotik-Rate-Limit but I hadn't sucess. I put the Mikrotik-Rate-Limit in the radius radreply table and when the MAC address is authenticated on mikrotik this parameter is send to the Mikrotik AP but the client can use the Internet without bandwidth limit. I don't use hotspot just MAC...
by conchalnet
Mon Jul 30, 2007 5:23 pm
Forum: General
Topic: MAC authentication on radius
Replies: 2
Views: 893

MAC authentication on radius

Hi all, Today I'm making the MAC authentication on a Free Radius server in all APs and it's working fine! I don't use hostspot, just mac authentication. All my customers have fixed IP address and today I make the simple queues manually on the APs. This is a problem because if a customer change the A...
by conchalnet
Mon Jul 30, 2007 5:15 pm
Forum: General
Topic: Bandwidth control with Radius
Replies: 14
Views: 7515

Bandwidth control with Radius

Hi all, I've all my AP running mikrotik with a 802.11b card working in AP mode and a 802.11a card working in wds sation to do backbone (point to point with my office). Today I've the bandwidth control concentrade in a mikrotik in my office but I want to do the bandwidth control on the AP where the c...
by conchalnet
Fri Jul 20, 2007 11:19 pm
Forum: Wireless Networking
Topic: The best choice of Router Board and Mini PCI card
Replies: 1
Views: 756

The best choice of Router Board and Mini PCI card

Hi all, I'm interesting in test my first router board to do an outdoor AP for my customers. I'm using Mikrotik since 2005, but all my APs are running in convention i386 PC machines inside of a hermetical box. I'm in doubt about the Router boards RB112 and RB133. (These are the options that I've to b...
by conchalnet
Mon Jul 16, 2007 2:28 pm
Forum: General
Topic: Ideal Outdoor Access Point for WISP
Replies: 10
Views: 2203

Re: Ideal Outdoor Access Point for WISP

Thanks KimC

I'll try to change the standard that I'm using in the new structure. I'll keep my actual AP with the omni and put a new AP with sectorials antenna working in 802.11g.

Regards,

Fabrício
by conchalnet
Sat Jul 14, 2007 3:18 pm
Forum: General
Topic: Ideal Outdoor Access Point for WISP
Replies: 10
Views: 2203

Re: Ideal Outdoor Access Point for WISP

Thanks again KimC I like of your sugestion to create a new structure in my tower with a new tecnology (802.11g). This sounds well! But I've a doubt: The 802.11b and the 802.11g working in 2.4Ghz. Wont I have interference between the two structures in the same tower? Another think that turn me afraid...
by conchalnet
Sat Jul 14, 2007 12:00 am
Forum: General
Topic: Ideal Outdoor Access Point for WISP
Replies: 10
Views: 2203

Re: Ideal Outdoor Access Point for WISP

Hi KimC, Thanks for your answer. Today I can't change the polarization to horizontal and the protocoll to 802.11g, because I have at about 500 customers installed and working. Today I'm making p2p traffic control and I'm limiting the bandwidth of my customers. This is working fine I think. I just wa...
by conchalnet
Fri Jul 13, 2007 2:33 pm
Forum: General
Topic: Ideal Outdoor Access Point for WISP
Replies: 10
Views: 2203

Re: Ideal Outdoor Access Point for WISP

HI JP, thanks for you answer I think in maintain the quality of the signal level and the speed of the customer's link with my AP that I've today, but with the capacity to connect more people. The packets per second is an important point, because this is a serious problem in a 2.4 card, but I don't t...
by conchalnet
Thu Jul 12, 2007 10:55 pm
Forum: General
Topic: Limiting the packets per second - dst-limit
Replies: 2
Views: 1008

Re: Limiting the packets per second - dst-limit

Hi savagedavid,

Thanks for your answer, but I don't understand it. Can you give an example of how I have to do to limit the pps of my customers?

Regards,

Fabrício F. Kammer
Conchalnet
by conchalnet
Thu Jul 12, 2007 8:35 pm
Forum: General
Topic: Limiting the packets per second - dst-limit
Replies: 2
Views: 1008

Limiting the packets per second - dst-limit

Hi all,

I want to limit the packets per second on my APs for each customer. I saw in the Mikrotik manual that this can be done with dst-limit in the filter rule, but I dindn't able to put this in pratic.

How can I make this? Is it possible?

Regards,

Fabrício F. Kammer
Conchalnet
by conchalnet
Thu Jul 12, 2007 8:33 pm
Forum: General
Topic: Ideal Outdoor Access Point for WISP
Replies: 10
Views: 2203

Re: Ideal Outdoor Access Point for WISP

Thanks very much NickW, You have a good idea with more sectors antennas

I'll wait the opinions of more mikrotik administrators to compare the different opinions about this.

Regards
by conchalnet
Wed Jul 11, 2007 7:50 pm
Forum: General
Topic: Ideal Outdoor Access Point for WISP
Replies: 10
Views: 2203

Ideal Outdoor Access Point for WISP

Hi all, I've a WISP with 5 towers (access points where the clients are connected) and I want to increase the quality of my access points. Than I'm interesting in change the structure of this and I desire some sugestions to do this. Today I have the configuration below: - i386 PC motherboar - 2 senao...
by conchalnet
Mon Feb 19, 2007 1:16 pm
Forum: General
Topic: RADIUS MikroTik-Rate-Limit and Static IP Addressing
Replies: 7
Views: 1984

jonmansey, Hi, I can't use pppoe in my customers, first because I'll have to change all customers configurations, what is a lot of work and second because I've a compromisse with my customers of "PowerOn the computer and start to browser the internet". Today I do the simples queues by hand. I just w...
by conchalnet
Tue Feb 13, 2007 1:27 pm
Forum: General
Topic: RADIUS MikroTik-Rate-Limit and Static IP Addressing
Replies: 7
Views: 1984

Hi ktw-matt,

I use static IP addresses on all my customers, but I want to concentrate all the informations on the same place to give more security and facility do make de backups.

I'm waiting the API for a long time too... It will be great.

Regards
by conchalnet
Wed Jan 31, 2007 1:36 pm
Forum: General
Topic: Freeradius + wireless + Mikrotik-Rate-Limit
Replies: 10
Views: 2495

Sorry but make a mistake. The attribute Mikrotik-Rate-Limit is not sent to the Mikrotik, just the attributes WISPr-Bandwidth-* are sento to the mikrotik, but the bandwidth is not controled.

Regards,

Fabrício F.: Kammer
by conchalnet
Tue Jan 30, 2007 9:46 pm
Forum: General
Topic: Freeradius + wireless + Mikrotik-Rate-Limit
Replies: 10
Views: 2495

Hi acim, My freeradius is running on a FreeBSD machine. I test the radius server with the radtest command and the result was: ============================================= radtest '00:4F:62:09:CF:EB' '' 192.168.33.2 1814 TEST Sending Access-Request of id 44 to 192.168.33.2 port 1812 User-Name = "00:...
by conchalnet
Tue Jan 30, 2007 9:01 pm
Forum: General
Topic: Freeradius + wireless + Mikrotik-Rate-Limit
Replies: 10
Views: 2495

I try to run the Freeradius with the option -X but I don't see the option Mikrotik-Rate-Limit on the log... how can I certify that the mikrotik AP are receiving the attribute? If you don't see it here, then it is not sent to MT. You can also try to use radtest or radexample client utility to test w...
by conchalnet
Tue Jan 30, 2007 8:13 pm
Forum: General
Topic: Freeradius + wireless + Mikrotik-Rate-Limit
Replies: 10
Views: 2495

Have you tried WISPr-Bandwidth-... attributes? Have you checked if Mikrotik-Rate-Limit attribute is sent back to client at all? Try this is freeradius debug mode. Yes I tryed this another option but the bandwith is not controled too. I try to run the Freeradius with the option -X but I don't see th...
by conchalnet
Tue Jan 30, 2007 1:14 am
Forum: General
Topic: RADIUS MikroTik-Rate-Limit and Static IP Addressing
Replies: 7
Views: 1984

HI ktw-matt,

did you find a solution to this problem? I want the same: limit the customers speed when the client is associated to my ap and the mac is authenticaded via radius but the interface has a fixed IP address.

Regards,

Fabrício F.: Kammer
by conchalnet
Tue Jan 30, 2007 1:13 am
Forum: General
Topic: Freeradius + wireless + Mikrotik-Rate-Limit
Replies: 10
Views: 2495

Freeradius + wireless + Mikrotik-Rate-Limit

Hi all, I want to use freeradius to authenticate the mac addresses of my wireless customers (like the access list). I don't want to use DHCP and hotspot, just authenticate the macs. This is work fine but I'm no able to do the Mikrotik-Rate-Limit to work when the client is associate to my AP. The par...
by conchalnet
Thu Jan 18, 2007 3:49 pm
Forum: General
Topic: I need of sugestions to reconfigurate my network
Replies: 1
Views: 734

I need of sugestions to reconfigurate my network

Hi all, I've a network with 400 customers and I want to reconfigurate it. Today I've 6 Access points and I'm using the Access List to deny the access to unauthorized people and I'm using the simple queue to control de traffic speed. This 6 Access points are connecteds to my office trhoug a 5.8 backb...
by conchalnet
Thu Jan 11, 2007 10:18 pm
Forum: General
Topic: MRTG - Graphics of the customers
Replies: 8
Views: 1755

Sorry nickb but I think that I'm noting understanding your explanation.

My doubt in use the OIDs of the simple queues is when I customer have the queue deleted and created again. The OID will change in this case and I'll lose the graphics history of this customer.

Regards
by conchalnet
Thu Jan 11, 2007 10:04 pm
Forum: General
Topic: MRTG - Graphics of the customers
Replies: 8
Views: 1755

But how can I make this using mrtg?
by conchalnet
Thu Jan 11, 2007 9:54 pm
Forum: General
Topic: MRTG - Graphics of the customers
Replies: 8
Views: 1755

Thanks nickb,

But I've a problem, because If a delete a queue and recreate it the OID is diferent, than I lose the graphics of before the exclusion.

Regards,
by conchalnet
Thu Jan 11, 2007 9:40 pm
Forum: General
Topic: MRTG - Graphics of the customers
Replies: 8
Views: 1755

MRTG - Graphics of the customers

Hi all, I use the mikrotik configurated as bridge and I want to do the graphics of my customers using MRTG. How can I make this if my mikrotik is in bridge mode? I have preference to do the graphics by the IP address because if an client radio is changed I won't lose the graphics. PS: All my custome...
by conchalnet
Mon Oct 02, 2006 1:55 am
Forum: General
Topic: Doubts with MAC authentication on FreeRadius
Replies: 2
Views: 2123

thanks savage,

I want the comment to know how is the customer associate with the mac adderess on the registration table.

regards
by conchalnet
Thu Sep 28, 2006 11:33 pm
Forum: General
Topic: Doubts with MAC authentication on FreeRadius
Replies: 2
Views: 2123

Doubts with MAC authentication on FreeRadius

Hi all, I started to authenticate the MAC address of the clients of my Mikrotik AP on a FreeRadius server unstead of use the access list. But when I've used the access list I put the customer name in the COMMENT of the access list than when the user was connected his name appears on the registration...
by conchalnet
Sat Sep 02, 2006 2:51 pm
Forum: General
Topic: Dual Boot
Replies: 3
Views: 1674

Thanks Savage, Can you help with the use of Mikrotik with VMWare on FreeBSD? How do I install the mikrotik using vmware? Another doubt: if I buy a pen drive will I able to install mikrotik on the pen drive and boot from it? PS: I'm installing in my laptop, then I just have one HD. Regards, Fabrício
by conchalnet
Sat Sep 02, 2006 5:59 am
Forum: General
Topic: Dual Boot
Replies: 3
Views: 1674

Dual Boot

Sorry, I think that I just asked this before, but I don't get the answer.

Is it possible to put Mikrotik and FreeBsd on the same HD to work with dual boot?

I want to have the options of wireless to analysis the traffic on some locations.

[]s

Fabrício
by conchalnet
Sat Sep 02, 2006 5:56 am
Forum: General
Topic: Packet gain
Replies: 2
Views: 1209

Hi Diganet,

I haven't linksys on my infraestructure... do you know if this problem occours with another radio?

Regards
by conchalnet
Fri Sep 01, 2006 11:07 pm
Forum: General
Topic: Packet gain
Replies: 2
Views: 1209

Packet gain

Hi all,

What's the cause of PACKET GAIN on ping?

I started to have this problem in one AP when I try to ping some client radios.

Regards

Fabrício
by conchalnet
Tue Aug 22, 2006 11:50 pm
Forum: General
Topic: Problem with Mangle + Time + TimeZone
Replies: 0
Views: 719

Problem with Mangle + Time + TimeZone

Hi all,

When I set the TimeZone on my mikrotik (-3 hours in my country) the time parameter of the firewall mangle don't work right.

Does anyone know how to help me?

Regards
by conchalnet
Sun Aug 20, 2006 2:14 pm
Forum: General
Topic: Doubt with Qos
Replies: 3
Views: 1247

Hello sten, Firstlly thanks for your help. I'm a Internet Provider and I want to priorize some traffics like dns, voip, games, msn, https, http, email, others and p2p, in this order. I'm priorizing the traffic and change the TOS of some connections, link dns, voip, games and msn to make this connect...
by conchalnet
Sun Aug 20, 2006 2:13 pm
Forum: General
Topic: Doubt with Qos
Replies: 3
Views: 1247

Hello sten, Firstlly thanks for your help. I'm a Internet Provider and I want to priorize some traffics like dns, voip, games, msn, https, http, email, others and p2p, in this order. I'm priorizing the traffic and change the TOS of some connections, link dns, voip, games and msn to make this connect...
by conchalnet
Sat Aug 19, 2006 6:00 pm
Forum: General
Topic: Doubt with Qos
Replies: 3
Views: 1247

Doubt with Qos

Hi all, I'm doing the QoS on my network. To do this I'm marking the packets in mangle section of the firewall, then I'm using the Queue tree to change the priority of the packects. Today I'm marking just the destination packets to the udp/tcp ports, I'm noting marking the incoming ports (from the po...
by conchalnet
Sat Aug 19, 2006 1:46 am
Forum: General
Topic: Games
Replies: 0
Views: 781

Games

Hi all,

I've a QoS control on my network to priorize some traffic like VoIP, DNS, SSH, Telnet, etc and I want to make a priorization of games too.

Does anyone have a list of tcp/udp ports used for the most common games on the Internet?

Regards,

Fabrício F. Kammer
Conchal/SP Brazil
by conchalnet
Thu Aug 17, 2006 5:01 pm
Forum: General
Topic: Limiting P2P connections
Replies: 0
Views: 930

Limiting P2P connections

Hi all! I'm trying to limit the amount of simultaneos P2P connections per host. But I can't do it using the rule bellow: chain=forward p2p= protocol=tcp tcp-flags=syn p2p=all-p2p connection-limit=21,32 action=drop I think that the mikrotik identifies the p2p connection after the connection is stabli...
by conchalnet
Fri Jul 28, 2006 5:31 pm
Forum: General
Topic: Mikrotik API
Replies: 1
Views: 1165

Mikrotik API

Hi all,

I'm a system analizer and I'm interesting in agregate some functions on my software to control the Mikrotik, like create queues, add access list entries, etc.

Are there an api to control mikrotik? If not, are there some idea to create an api?

Regards

Fabrício F. Kammer
by conchalnet
Thu Jul 20, 2006 8:06 pm
Forum: General
Topic: 60Km link with 24Mbps full duplex
Replies: 1
Views: 828

60Km link with 24Mbps full duplex

Hi all,

I need of a link with 60km and at least 24Mbps full duplex (24Mbps of upload and 24Mbps of download).

What's the ideal configuration to do this enlace? Must I use mikrotik radios or is it best if I use another equipment?

Regards,

Fabrício F. Kammer
by conchalnet
Thu Jul 13, 2006 2:39 pm
Forum: General
Topic: Doubt with Win XP
Replies: 8
Views: 1859

Hi wildbill442,

I understand you and I agree with you, but my doubt is why is the signal in mikrotik B is wrose than Mikrotik B than in Mikrotik A. The client radio/antena/distance is the same. Both mikrotik machines are in the same tower.

Regards
by conchalnet
Wed Jul 12, 2006 1:50 pm
Forum: General
Topic: Doubt with Win XP
Replies: 8
Views: 1859

OK jarosoup

I agree with you, but I want to know why does the same Win XP do different measurement on Mikrotiks A and B?

BulleriNET said that this can be interferiance on the channel... how can I measure the interference?

Regards,
by conchalnet
Tue Jul 11, 2006 10:45 pm
Forum: General
Topic: Doubt with Win XP
Replies: 8
Views: 1859

Doubt with Win XP

Hi all, I've 2 mikrotik machines (Mikrotik A and Mikrotik B) configurated in the same tower with ssid and channel diferents. - I connect with a windows machine on the mikrotik A. The signal strenght stays -60 on the winbox. The windows XP says that the signal is EXCELENT. I connect with the same win...
by conchalnet
Wed Jun 14, 2006 11:49 pm
Forum: General
Topic: Problems with queue
Replies: 13
Views: 2602

Thanks Gotmoth,

I'll try to change, but how I said: The problem don't occours with all my users just with some users and I've a lot of users to and change all simple queues will do a lot of work.

Regards
by conchalnet
Wed Jun 14, 2006 11:35 pm
Forum: General
Topic: Problems with queue
Replies: 13
Views: 2602

OK, but I think that the fault of burst limit don't justify the problem because it isn't a required parameter. Do you agree?
by conchalnet
Wed Jun 14, 2006 11:30 pm
Forum: General
Topic: Problems with queue
Replies: 13
Views: 2602

I don't want to use burst limit... I want to have the limit fixed in 200kbps
by conchalnet
Wed Jun 14, 2006 11:19 pm
Forum: General
Topic: Problems with queue
Replies: 13
Views: 2602

I don't know what's happening.

The problem occours with some clients and I don't know why. :(
by conchalnet
Wed Jun 14, 2006 11:06 pm
Forum: General
Topic: Problems with queue
Replies: 13
Views: 2602

Hi Gotmoh,

What type of queue are you using?

I'm with problems when I use pfifo or bfifo. I try to use red today and I think that the problem was solved with this type of queue. But I want to know why can I use pfifo and bfifo?

Regards
by conchalnet
Wed Jun 14, 2006 6:32 pm
Forum: General
Topic: Problems with queue
Replies: 13
Views: 2602

Hi proxy,

I'm not sure, but I think that with this simples queue you can't be able to control de upload bandwidth because you specified the destination address instead of target address.

Am I incorrect?

Regards
by conchalnet
Wed Jun 14, 2006 3:20 pm
Forum: General
Topic: Problems with queue
Replies: 13
Views: 2602

Problems with queue

Hi all, I'm with a problem in some queues. I don't know the reason but some clients can have more bandwith that the configurated for them. The client that have the IP 200.yyy.xxx.226 has more bandwidth during all time. The configuration of the simple queue is listed below: name="JOSE DA SILVA" targe...
by conchalnet
Sat Jun 03, 2006 1:09 am
Forum: General
Topic: Mikrotik and FreeBSD on the same HD
Replies: 3
Views: 963

Mikrotik and FreeBSD on the same HD

Hi all,

Can I put the Mikrotik and FreeBSD on the same HD?

I would like to have Mikrotik in my notebook to use it to analyze the spectrum and the performance of Wireless links.

Thanks
by conchalnet
Sat May 06, 2006 1:48 am
Forum: General
Topic: Problems with MSN disconnecting
Replies: 4
Views: 1296

Yes I'm using PCI cards on windows xp, but I've the same problem on customers that are using access points instead of pci cards.

How can I disable the WZC???

For default I uncheck the option in Properties of Wireless conection on Windows... are there another way to resolve this problem???
by conchalnet
Fri May 05, 2006 7:11 pm
Forum: General
Topic: Problems with MSN disconnecting
Replies: 4
Views: 1296

Problems with MSN disconnecting

Hi all, I'm being crazy, my customers are with problems with the connections of MSN that disconnects and reconnects all time. What can I do to solve this problem??? I tested this by my self. If I use my MSN in my office I don't have problems, but if I use my MSN throught a wireless connection (in my...
by conchalnet
Tue Apr 04, 2006 12:06 am
Forum: General
Topic: SNMP
Replies: 54
Views: 28559

The amount of registration on the AP is good to have throught SNMP.
Fixed MIBs for clients that are registred is good too, because I want to do MRTG graphics of the signal level of the clients registred in the AP.

Thanks

Fabrício
by conchalnet
Tue Apr 04, 2006 12:05 am
Forum: General
Topic: Access List names
Replies: 1
Views: 1878

Access List names

Hi all, I think that the possibility of to have a name on the Access List/Registration (not a comment) like a queue name... with this we can have the possibility of classify the Access List/Registration by the name of the User, what is not possible using comments and tha name will be in the same lin...
by conchalnet
Tue Mar 14, 2006 1:16 pm
Forum: General
Topic: Total registration + MRTG
Replies: 10
Views: 2236

Conch What you did is fine for Wireless Reg Users. How do I go about doing this for a simple Ethernet PPPoE server whereby I just wanna know how many Users are online.... Hi firenetwork, I never use Mikrotik for PPPoE users... but if you've a form to list something of all users that are connected y...
by conchalnet
Mon Mar 13, 2006 4:07 pm
Forum: General
Topic: Total registration + MRTG
Replies: 10
Views: 2236

I think that I was able to get the registrations of the mikrotik using a shell script and doing the input on mrtg with this script. I did as below: #Start of the script reg=`snmpwalk -Os -c public -v 1 192.168.0.1 .1.3.6.1.4.1.14988.1.1.1.2.1.3.0 | wc -l`; if [ ! -n "$reg" ] then reg="0" fi echo $re...
by conchalnet
Thu Mar 09, 2006 1:21 pm
Forum: General
Topic: Total registration + MRTG
Replies: 10
Views: 2236

but how can I do this with snmp???
by conchalnet
Wed Mar 08, 2006 1:38 am
Forum: General
Topic: Total registration + MRTG
Replies: 10
Views: 2236

Anyone can help me???
by conchalnet
Thu Mar 02, 2006 4:55 am
Forum: General
Topic: Total registration + MRTG
Replies: 10
Views: 2236

Total registration + MRTG

Hi all,

Does anyone know how to do a MRTG graphic of the amount of registrations in a mikrotik AP?

[]s

Fabrício
by conchalnet
Wed Feb 15, 2006 8:30 pm
Forum: General
Topic: Default forwarding x security
Replies: 0
Views: 466

Default forwarding x security

Hi all, I dont know if the topic title is right, but... I have the configuration below MK1------WDS 5.8 link-------MK2---AP 2.4---customers MK1 = mikrotik 1 in bridge mode MK2 = mikrotik 2 in bridge mode I disabled the default forwanding in the AP... This is OK.... a customer can't see another one i...
by conchalnet
Thu Feb 02, 2006 10:54 pm
Forum: General
Topic: More doubts with bandwidth limiting
Replies: 2
Views: 1021

name="Peer to Peer" target-addresses=0.0.0.0/0 dst-address=0.0.0.0/0 interface=all parent=none direction=both priority=8 queue=default/default limit-at=0/0 max-limit=64000/64000 total-queue=default time=9h-23h,sun,mon,tue,wed,thu,fri,sat p2p=all-p2p in queue simple. Hi hmekolli, This rule will limi...
by conchalnet
Thu Feb 02, 2006 4:05 pm
Forum: General
Topic: More doubts with bandwidth limiting
Replies: 2
Views: 1021

More doubts with bandwidth limiting

Hi all, I've a simple queue for each customer to limit the download/upload. I'm with three doubts: 1 - I'm trying to do the QoS for some services. I'm doing the mangle of the packets and I think that is OK. My doubt is how interface must I use in the simple queues of the QoS??? If I use the global-o...
by conchalnet
Mon Jan 30, 2006 1:06 pm
Forum: General
Topic: Crazy question about bridge!
Replies: 18
Views: 2575

Conchalnet,

Are you using 2.8 or 2.9? Winbox or CLI?
I'm using 2.9. And I use the Winbox or SSH to do the configurations.
by conchalnet
Mon Jan 30, 2006 1:04 pm
Forum: General
Topic: Crazy question about bridge!
Replies: 18
Views: 2575

/interface bridge filter add in-interface=wlan1 out-interface=wlan2 action=drop add in-interface=wlan1 out-interface=wlan3 action=drop add in-interface=wlan2 out-interface=wlan1 action=drop add in-interface=wlan2 out-interface=wlan3 action=drop add in-interface=wlan3 out-interface=wlan1 action=drop...
by conchalnet
Sun Jan 29, 2006 9:37 pm
Forum: General
Topic: Crazy question about bridge!
Replies: 18
Views: 2575

Hi sten,

Your answer was YES... but how can I do it?

Regards
Your question was "Can it be done?" not "How do i do it?" :twisted:
Hi sten,

Sorry by my stupid question!

If I don't know if it's possible I don't know how I can do. ;)

If you know, please tell me how can I configure this.
by conchalnet
Sun Jan 29, 2006 3:50 pm
Forum: General
Topic: WDS Static X Dynamic
Replies: 2
Views: 1003

Hi cibernet

How can I configure a static WDS system???

regards
by conchalnet
Sun Jan 29, 2006 3:48 pm
Forum: General
Topic: Crazy question about bridge!
Replies: 18
Views: 2575

Hi sten,

Your answer was YES... but how can I do it?

Regards
by conchalnet
Sat Jan 28, 2006 7:59 pm
Forum: General
Topic: WDS Static X Dynamic
Replies: 2
Views: 1003

WDS Static X Dynamic

Hi all, Can anyone tell me the diference between static and dynamic mode? How is the advantage of each one? And how can I setup a static wds? Today I've 3 PTP wds links setup as bellow: - Mikrotik 1 - Wlan1 - Mode bridge - wds: dynamic - bridge: bridge1 - Mikrotik 2 - Wlan1 - Mode station-wdsbridge ...
by conchalnet
Sat Jan 28, 2006 7:26 pm
Forum: General
Topic: Crazy question about bridge!
Replies: 18
Views: 2575

I tryied to use the firewall to drop the traffic between the interfaces without sucess because I didn't understand very well how the traffic flows on the bridge... Some time the traffic becames from wlan1 and goes to wlan2, other times the traffic comes from wds1 and it goes to wds2... I tryid to us...
by conchalnet
Sat Jan 28, 2006 1:03 pm
Forum: General
Topic: Crazy question about bridge!
Replies: 18
Views: 2575

@conchalnet The main feature of bridge is just that: to bridge everything from and to interfaces that are assigned to it :) You have the same situation as, for example, you had 3pcs of routerboards with 1WLAN and 1LAN on them, and all 3 ethernets connects to the same (non VLAN) switch. Well, GJS`s ...
by conchalnet
Sat Jan 28, 2006 1:00 pm
Forum: General
Topic: Crazy question about bridge!
Replies: 18
Views: 2575

How about firewall rules? For example, silently drop all traffic with: in interface WLAN1 and out interface WLAN2 in interface WLAN1 and out interface WLAN3 in interface WLAN2 and out interface WLAN1 in interface WLAN2 and out interface WLAN3 in interface WLAN3 and out interface WLAN1 in interface ...
by conchalnet
Sat Jan 28, 2006 2:41 am
Forum: General
Topic: Crazy question about bridge!
Replies: 18
Views: 2575

Into a switch!

If it's possible to do without vlan I'll prefer... aren't there something that say: the traffic of wlan1 just go to the ethernet???? Something like a route for bridged interfaces

Thanks
by conchalnet
Fri Jan 27, 2006 9:06 pm
Forum: General
Topic: MSN Messenger disconnecting
Replies: 24
Views: 4049

Hi djape, I'm doing the QoS not for MSN, but for msn, http, email, dns, voip, others and p2p. My doubts are: 1-How can I change the TOS? Must I do this in the firewall's mangle section putting a rule for the MSN port and selecting the action Change TOS? Must I put this rule before of the rule that m...
by conchalnet
Fri Jan 27, 2006 3:46 pm
Forum: General
Topic: Crazy question about bridge!
Replies: 18
Views: 2575

Thanks jager! But I've a problem, I don't have PCI slot free on my machine and I'm using the onboard ethernet card to do this. Is it possible to do this on my ethernet card? Can you help with the configuration? I never used vlan. My mikrotik is working as bridge and I can't change this actualy. The ...
by conchalnet
Fri Jan 27, 2006 2:35 pm
Forum: General
Topic: Crazy question about bridge!
Replies: 18
Views: 2575

Crazy question about bridge!

Hi all, This is a crazy question about bridge that I don't have idea if it is possible! :shock: I've a mikrotik with 3 wireless cards and one ehternet card all they in the same bridge. Is it possible that the traffic of the wlan1 be copied only to the ethernet interface, wlan2 be copied only to the ...
by conchalnet
Fri Jan 27, 2006 2:08 pm
Forum: General
Topic: MSN Messenger disconnecting
Replies: 24
Views: 4049

Hi djape! I didn't change the prism card yet, because I'm with problem to find cm9 or sr2 cards on Brazil. I'm doing the QoS control for all traffic and you sugest to me to change the TOS of the MSN traffic. How can I do this? In the Mangle section of the firewall? An sorry by my ignorance but what'...
by conchalnet
Thu Jan 26, 2006 10:02 pm
Forum: General
Topic: MSN Messenger disconnecting
Replies: 24
Views: 4049

If you're implemented QoS then create a rule for MSN (port 1863) giving it better priority and see if it fixes. I seriously believe this is related to something else, start sniffing these packets and see what you can come up with. Universal Plug and Play, as others have suggested, would do you good...
by conchalnet
Thu Jan 26, 2006 8:11 pm
Forum: General
Topic: MSN Messenger disconnecting
Replies: 24
Views: 4049

That's exactly the problem, bittorrent eating up the bandwidth, but not the propper resolution. One should implement p2p queues to control how much bandwidth should be allocated to P2P, no matter what port they use, MT is smart enough to track and shape them. A good policy is to control P2P by days...
by conchalnet
Thu Jan 26, 2006 7:33 pm
Forum: General
Topic: MSN Messenger disconnecting
Replies: 24
Views: 4049

Hi Dufol,

I belive that I've the same problem that you had. But I can't disconnect my customer because I'm selling the Internet access to him.

Do you have another solution?

Thanks
by conchalnet
Wed Jan 25, 2006 12:50 pm
Forum: General
Topic: Hotspot + bridge
Replies: 5
Views: 986

Hi cibernet You said that it's possible to configure the Hotstop in a bridged mikrotik. But the first topic of the document that you sent me is: "1 first, a valid IP address is required on both interfaces. This can be done with /setup command. In this example we will assume the configuration with DH...
by conchalnet
Wed Jan 25, 2006 4:54 am
Forum: General
Topic: Hotspot + bridge
Replies: 5
Views: 986

Hi cibernet, I can't use pppoe because I've some equipments on client side that don't working with pppoe. I really want to do the authentication of my clients using the hotspot of the mikrotik. You said that it's possible to be configurated in a mikrotik machine. How can I do this? Can you give some...
by conchalnet
Wed Jan 25, 2006 4:51 am
Forum: General
Topic: Bandwidth control + Qos
Replies: 4
Views: 1866

I want to priorizy the packets in this order: voip, dns, http, email, others and p2p I'm doing this marking the packets using mangle. Then I create some queue trees to do the priorizing of the traffic. The major problem is that if I use the global-out to do the QoS the traffic don't pass by my simpl...
by conchalnet
Wed Jan 25, 2006 2:03 am
Forum: General
Topic: Bandwidth control + Qos
Replies: 4
Views: 1866

Bandwidth control + Qos

Hi all, Some days ago I posted a message here, but I dind't have a lot of help and I wasn't able to solve my problem. I want to do the QoS and bandwidht limitation on my mikrotik. I'm thinking in use the simple queues to do the bandwidth limitation and the mangle+queue tree to do the QoS. My major d...
by conchalnet
Wed Jan 25, 2006 1:57 am
Forum: General
Topic: Hotspot + bridge
Replies: 5
Views: 986

Hotspot + bridge

Hi all, Is it possible to configure a bridge to act as a hotspot? I've some mikrotik machines work as AP and configurated as bridge. Now I want to provide Internet access of 3 forms: 1- My customer using fixed IP address WITHOUT authentication; 2- My customer using fixed IP address WITH authenticati...
by conchalnet
Mon Jan 23, 2006 1:40 pm
Forum: General
Topic: Prerouting vs Forward
Replies: 3
Views: 2510

Thanks sublimespot,

But what's the best chain to do the QoS in your opnion?

Regards
by conchalnet
Sat Jan 21, 2006 4:33 pm
Forum: General
Topic: QoS and Bandwidth limitation
Replies: 4
Views: 2582

Hi Hugh Thanks for your reply but this doesn't occour here. If the traffic macth the queue tree the simple queue is don't used. I'm using the global-out interface to do the QoS control in the Queue Tree, if I change the global-out to Public interface the simple queues are used but I don't know if th...
by conchalnet
Sat Jan 21, 2006 2:20 am
Forum: General
Topic: QoS and Bandwidth limitation
Replies: 4
Views: 2582

Can anyone help me with this???

I just want know if is it possible to use the queue tree with simple queue?

Queue tree - QoS
Simple queue - Bandwidth limitation

Thanks
by conchalnet
Fri Jan 20, 2006 12:20 pm
Forum: General
Topic: QoS and Bandwidth limitation
Replies: 4
Views: 2582

QoS and Bandwidth limitation

Hi all, I'm tring to do the QoS of same services and the bandwidth limitation. The QoS I'm doing using mangle+queue tree and the bandwidth limitation I'm doing using the simples queues. But when I active the queue tree the traffic of my clients don't match the simple queue anymore. The major doubt i...
by conchalnet
Thu Jan 19, 2006 3:03 pm
Forum: General
Topic: Help with Mangle for QOS
Replies: 11
Views: 4028

Thanks Jörgen

Your explanation was great...
by conchalnet
Thu Jan 19, 2006 2:32 pm
Forum: General
Topic: Prerouting vs Forward
Replies: 3
Views: 2510

Prerouting vs Forward

Hi all,

How is the difference between the chains Prerouting and Forwarding?

I just read the http://www.mikrotik.com/docs/ros/2.9/ip/flow, but I've some doubts... I'll be grateful if somene can explain this to me.

What's the best one to do the QoS in a bridged Mikrotik box?

Thanks
by conchalnet
Thu Jan 19, 2006 2:20 pm
Forum: General
Topic: advantages and disadvantages in use HotSpot
Replies: 3
Views: 3225

durim,

Can I configure the hotspot in a bridge mikrotik?

Thanks

Fabrício
by conchalnet
Thu Jan 19, 2006 1:23 pm
Forum: General
Topic: Help with Mangle for QOS
Replies: 11
Views: 4028

joeri91942

What's the passthrough do?

I want to put the QoS on my bridge... will I need to change the prerouting to foward chain?

Thanks

Fabrício
by conchalnet
Thu Jan 19, 2006 1:19 pm
Forum: General
Topic: advantages and disadvantages in use HotSpot
Replies: 3
Views: 3225

Anyone can help with this?
by conchalnet
Wed Jan 18, 2006 9:05 pm
Forum: General
Topic: advantages and disadvantages in use HotSpot
Replies: 3
Views: 3225

advantages and disadvantages in use HotSpot

Hi all, I want to know how is the advantages and disadvantages in use HotSpot on a WISP. I've an WISP and I'm not have authentication today then I'm thinking in use HotSpot to do this. Can anyone to say me the advantages and disadvantages on this method? I'm worried about speed and possible problems...
by conchalnet
Wed Jan 18, 2006 5:33 am
Forum: General
Topic: Urgent! Problems with speed
Replies: 23
Views: 5738

Thanks again djape,

Did you see the Dlink card? Do you know this card? Is it good?

The mikrotik recognize it as Atheros AR5213. Is this card the CM9?

Thanks again
by conchalnet
Wed Jan 18, 2006 2:35 am
Forum: General
Topic: Urgent! Problems with speed
Replies: 23
Views: 5738

djape, I'm not finding the CM9 cards on Brazil but I found atheros cards. Is it good to do the AP? Is it better than prism cards? The card that I found is a Dlink DWL-AG530 ( http://www.dlink.com/products/?pid=306 ) Maybe I can buy this card ( http://www.star-os.com/CM9-Specs.htm ) but it has less p...
by conchalnet
Wed Jan 18, 2006 2:19 am
Forum: General
Topic: Urgent! Problems with speed
Replies: 23
Views: 5738

djape,

Another doubt:

I block all customers to get access to the AP using the Access list. I just allow one machine to associate to the AP and the problem persists just with a machine registrared.
Why does it occour??? The pps on this situation is about 10pps.

Thanks again

Fabricio F. Kammer
by conchalnet
Tue Jan 17, 2006 4:29 pm
Forum: General
Topic: Urgent! Problems with speed
Replies: 23
Views: 5738

djape,

If I change the omni directional antenna for 4 90º or 3 120º antennas how is the ideal configuration? Use the same ssid in all aps or use diferents ssids in each ap.

Thanks

Fabrício
by conchalnet
Tue Jan 17, 2006 4:18 pm
Forum: General
Topic: Urgent! Problems with speed
Replies: 23
Views: 5738

djape,

You suggested that I use CM9 or SR2 cards. Can you indicate a manufacturer of cards that using this chipsets?

I'm not finding it on Brazil.

Thanks

Fabrício
by conchalnet
Tue Jan 17, 2006 3:25 pm
Forum: General
Topic: Urgent! Problems with speed
Replies: 23
Views: 5738

OK djape,

How much traffic can I have in a 802.11b AP? To the AP works great!

Thanks

Fabricio
by conchalnet
Tue Jan 17, 2006 1:33 am
Forum: General
Topic: Urgent! Problems with speed
Replies: 23
Views: 5738

Hi djape, I'm with problems in this moment! Than I do some tests following your message. You can see the results below: - Number of registrations: 37 - Maximum Number os packets per second: 240 ( but it was a peak, the average it was about 160pps See the result of tests: Without any control of P2P t...
by conchalnet
Mon Jan 16, 2006 12:45 pm
Forum: General
Topic: Urgent! Problems with speed
Replies: 23
Views: 5738

Ok djape, I agree with you about noise level but I tried all channels and the problems persists :( How can I to measure the noise level? Or how can I prevent the problems with noise on this tower? I need to solve this urgently because I can support the phone calls of my clients tell me about this pr...
by conchalnet
Sat Jan 14, 2006 2:27 am
Forum: General
Topic: Urgent! Problems with speed
Replies: 23
Views: 5738

Urgent! Problems with speed

Hi all, Sorry for repost the problem, but if I can get a solution I´ll have to abandon the Mikrotik system... I'm with problems in just one tower. In some random moments the speed of the tower is terrible... In good moments I've a ping average at about 7ms or in the maximum 15ms but when I've speed ...
by conchalnet
Tue Jan 10, 2006 1:22 pm
Forum: General
Topic: Drop connections of a MAC Address and IP FLIP FLOP
Replies: 2
Views: 1524

Drop connections of a MAC Address and IP FLIP FLOP

Hi all, There are someone trying to use my network illegally. I discovery this because I'm running the arpwatch software in a FreeBSD machine and this software tell me via email the IP address changes on the network. I can't block the registration this MAC address because it's behind of the ethernet...
by conchalnet
Tue Jan 10, 2006 1:09 pm
Forum: General
Topic: MSN Messenger disconnecting
Replies: 24
Views: 4049

Is this in the same tower where you're having P2P issues?

I had problems with MSN disconnecting that were related to bittorrent clients eating up all bandwidth, and therefore the disconnections (not exatctly related to MSN but that would also go out)
Hi stuntshell,

Yes! It's in the same tower!
by conchalnet
Mon Jan 09, 2006 9:41 pm
Forum: General
Topic: Problems with P2P softwares - IT'S URGENT
Replies: 12
Views: 3545

Conchalnet: there are a couple of things I have done which seems to help. First limit the total number of TCP connections per IP (80-100): This will help with the saturation of TCP connections that occures with P2P programs. Next: many P2P programs will allow download based upon the amount of uploa...
by conchalnet
Mon Jan 09, 2006 7:28 pm
Forum: General
Topic: MSN Messenger disconnecting
Replies: 24
Views: 4049

try testing the connection from msn messenger tools ... test tcp connection...

I use upnp for voice n webcam ...
The MSN connect but it disconnect and reconnect constantly...

What's upnp?

Thanks again
by conchalnet
Mon Jan 09, 2006 6:13 pm
Forum: General
Topic: MSN Messenger disconnecting
Replies: 24
Views: 4049

Re: MSN Messenger disconnecting

My customers are complaining that MSN disconnect all time and that the MSN file transfer is very sllow. Your transfers go through microsoft's MSN servers. Which i -think- are somewhere i the US. How can I correct this problem? UPnP for NAT'ed gateways. UPnP require L2 access from clients to UPnP su...
by conchalnet
Mon Jan 09, 2006 6:10 pm
Forum: General
Topic: MSN Messenger disconnecting
Replies: 24
Views: 4049

does the msn messenger works over http proxy? or directly connected through tcp?

anyway I prefer to use natting to solve this problem
Hi marron, I don't use proxy... I use the standart form of the msn connection.
All my clients are using Valid IPs.

Thanks
by conchalnet
Mon Jan 09, 2006 1:12 pm
Forum: General
Topic: MSN Messenger disconnecting
Replies: 24
Views: 4049

no cibernet, I don't have pppoe
by conchalnet
Fri Jan 06, 2006 7:54 pm
Forum: General
Topic: MSN Messenger disconnecting
Replies: 24
Views: 4049

MSN Messenger disconnecting

Hi all I've a Mikrotik 2.9.10 configurated as bridge on my tower. In this machine I've 2 wireless cards: one 2.4Ghz card doing AP and one 5.8Ghz card doing PTP with my office. My customers are complaining that MSN disconnect all time and that the MSN file transfer is very sllow. What's happen? How c...
by conchalnet
Wed Jan 04, 2006 1:11 pm
Forum: General
Topic: Problems with P2P softwares - IT'S URGENT
Replies: 12
Views: 3545

Yes! I started to drop the P2P connections because I started to be crazy with this tower! I change everthing on it, really everthing, the machine, the cables, the omni antenna, the directional antenna (of the ptp), the wireless cards, the no break, the electrical installation... I change everthing o...
by conchalnet
Wed Jan 04, 2006 12:37 pm
Forum: General
Topic: Problems with P2P softwares - IT'S URGENT
Replies: 12
Views: 3545

OK yogi, I agree with you but I don't how can I do this. I'm using fixed IPs for each client with a simple queue in the Mikrotik for each customer to limit the bandwidth of upload and download. How can I use a queue to limit the bandwidth of the P2P software together with the simple queue that limit...
by conchalnet
Tue Jan 03, 2006 6:09 pm
Forum: General
Topic: Problems with P2P softwares - IT'S URGENT
Replies: 12
Views: 3545

But connection limit works only with TCP protocol... I can't setup it with udp connections!

Thanks
by conchalnet
Tue Jan 03, 2006 1:35 pm
Forum: General
Topic: Problems with P2P softwares - IT'S URGENT
Replies: 12
Views: 3545

Hi Normis, There aren't problem to slow the P2P traffic (not very much). What's happen is if I don't put the rule to limmit the p2p sotware I've slowness in the tower for all services p2p, http, ftp, ping, etc If I don't put the rule on mikrotik the ping average up to about 300ms with a bit of packe...
by conchalnet
Tue Jan 03, 2006 12:37 pm
Forum: General
Topic: Problems with P2P softwares - IT'S URGENT
Replies: 12
Views: 3545

Problems with P2P softwares - IT'S URGENT

Hi all, Some months ago I'd a problem with speed in my towers than, after a lot of tests and trys, I discovery that the problem was with the amount of P2P connections. Than I create the firewall rule bellow to limmit the number of P2P connections per client: /ip firewall filter add chain=forward pro...
by conchalnet
Wed Nov 30, 2005 1:38 pm
Forum: General
Topic: Doubt with a bridge machine
Replies: 0
Views: 532

Doubt with a bridge machine

Hi all, I've a Mikrotik machine configured as bellow: - 3 wireless cards configured in Bridge mode and using WDS - 1 ethernet card - All interfaces are in the same bridge (bridge1) This machine is on the tower of my office (where I've my Internet link and my servers and gatways of all my clients) an...
by conchalnet
Wed Nov 30, 2005 1:28 pm
Forum: General
Topic: Scroll in Winbox
Replies: 9
Views: 4739

I noted this too, I don't have horizontal scroll bars in any window... I don't have any parameter to comper because I started to use Mikrotik on 2.9...
by conchalnet
Mon Nov 21, 2005 1:08 pm
Forum: General
Topic: PTP with 2.4 Prism cards
Replies: 1
Views: 593

Can't anyone help me????
by conchalnet
Thu Nov 17, 2005 6:02 pm
Forum: General
Topic: application examples / scripts WIKI
Replies: 16
Views: 4539

It's great!!!

Congratulations by the idea!
by conchalnet
Thu Nov 17, 2005 2:30 pm
Forum: General
Topic: PTP with 2.4 Prism cards
Replies: 1
Views: 593

PTP with 2.4 Prism cards

Hi all, I've 2 PTPs using 5.8 atheros card. In one mikrotik I configured the card as bridge and activate the dynamic WDS on it and in another mikrotik I configured the card as station wds. The links works fine. Yesterday I tried this configuration using two 2.4Ghz Senao cards (Prism II) and it isn't...