Hi,

I just bought a RB1100AHx4 and bridge all ports. Once I enabled 'Use IP Firewall' in bridge, no packets can pass through even though I didn't block anything. Any idea how or where I can start troubleshooting this? I've search everywhere and have no idea what's wrong. Thanks.

It is not certain it is really locking it, when the provider uses Cisco equipment it can take quite long before it switches to a new MAC address because the ARP lifetime is quite long and the outgoing ARP does not learn from incoming ARP requests. So it could have been it started working when you l...

I can ping any other IP within the /25 except .1 which is the router at my ISP. May be your provider uses MAC locking. In such case you have to call provider and ask unblock new MAC (some providers allow this to do online. Sometime they charge additional costs for this ^). Or change ether1 RB2011 M...

You need to put ether1 and ether5 into the bridge, then assign the IP address to the bridge, not the port. For your information, and I did assign the IP to the bridge. The rest of the machine within the same subnet can access to RB2011 and vice versa except .1 which is the ISP gateway. Bridge1=Ethe...

Are you just using the RB2011 as a switch? or are you routing? Can you export the bridge and ethernet config? I'm not routing anything at the moment, I'm just using it as switch. [MikroTik] > /interface bridge print Flags: X - disabled, R - running 0 R ;;; defconf name="bridge" mtu=auto a...

Hi, I was using RB600A. Due to port limitation, I decided to change to replace it with RB2011iLS. I set public IP to 2xx.1xx.1xx.2/25 to ether1, GW 2xx.1xx.1xx.1 and the rest of the ports are slave switch and bridged. I can ping any other IP within the /25 except .1 which is the router at my ISP. I ...

Yes, the simple queue was doing traffic shaping.

After going through all the settings slowly, I solved the problem by disabling a simple queue created by some previous guy.

Hi,

I created openvpn from RB2011 to RB2011. I can get 8-10mbps using bandwidth test. But when I transfer files from windows to windows, the max speed I can get is around 2Mbps. Any idea? Thanks.

Solved the problem.

I need to enter the MAC address of the bridge and the IP addresses in order to get it working.

Hi, I have the following setup. [WAN]<-->[Mikrotik with VPN]<-->[Untangle Bridge Mode]<-->[Servers/Users] Everything is working fine before I enable hotspot. Once I enabled hotspot, I can't seem to RDP to my servers behind untangle via VPN. What am I missing here? I did entered the servers' IP in IP...

Finally, I saw this in log.

"system,error,critical System rebooted because of kernel failure".

I've setup resource graph, everything is normal, no CPU spike etc. I am able to access to the router via winbox while the rest of the users were unable to access to internet for about 10-15secs.

Hi, I'm using Mikrotik RB750G, the problem is that when we are browsing the router will suddenly stops responding and after some time, it'll resume operation. I looked at the log but there's nothing suspicious. Anyone have any idea? Could it be the power adapter not supplying enough power? I'm using...

Since you changed hardware, you have to troubleshoot one item at a time. Were you using the same version of RouterOS before? Have you tried disabling multi-cpu?

Hi,

I'm using hotspot to block Internet access for users in LAN, the problem is this also block external traffic from coming in. I need to bypass remote management port like VNC or RDP so that we can manage PC without internet access. Anyway to do this? Thanks.

This problem continue in 4.9..... i not use dhcp-client, is a pppoe-concetrator..... only used do authenticate pppoe users, the link is received with a static ip configuration (ethernet) and distributed with pppoe..... I am currently using a RB600a routerboard and a x86 RouterOS with ver 4.9 withou...

I finally solved it. It's my typo error at one of the rules. Thanks.

Is "allow-remote-request" set to yes on the DNS server? Are there any firewall filters that block that port?

Yes, "allow-remote-request" is set to yes.

By default that port is block, but I have rules that only allows my subnet to connect to Mikrotik.

I am seeing lots of tcp syn being drop at my router. Anyone has any idea what's wrong? 1175.121.240.2 is running Mikrotik with DNS 202.65.40.233 is running cpanel 07:42:47 firewall,info DROP INPUT input: in:bg0 out:(none), src-mac 00:20:9c:69:6a:1d, proto TCP (SYN), 202.65.40.233:45285->115.121.240....

Hi, I'm still new to Microtik and I would like to find out if Microtik supports the following setup? I have 2 WANs, WAN1=dedicated 1mbps and WAN2=10mbps shared. Internet users will utilise the WAN1 (1mbit) connection fisrt, if the bandwidth exceeds 1mbit, the rest of the traffic will route to WAN2. ...