Community discussions

MUM Europe 2020

Search found 124 matches

by Wyoming
Wed Sep 05, 2012 8:23 pm
Forum: Wireless Networking
Topic: Routerboard 751U-2HnD with External Antenna
Replies: 1
Views: 1520

Routerboard 751U-2HnD with External Antenna

I have a new RB751U-2HnD and we want to setup the router to use the External Antenna (MMCX) Connector. Under the HT tab we set this to Antenna B but when we are directly in front of the antenna we only get 2 bars on a device. in the manual it says this. RB751U has 3 built-­‐in wireless antennas • Ch...
by Wyoming
Thu Apr 28, 2011 12:03 am
Forum: General
Topic: VLAN via switch chip: how do I reach the router?
Replies: 4
Views: 4190

Re: VLAN via switch chip: how do I reach the router?

I to would prefer to have an actual switch in front of the router. My issue is that they bought us RB493Gs for a project with the intent of using the switching functionality in them so I had to find a way to make it work and this is what i came up with.
by Wyoming
Wed Apr 27, 2011 5:59 pm
Forum: General
Topic: VLAN via switch chip: how do I reach the router?
Replies: 4
Views: 4190

Re: VLAN via switch chip: how do I reach the router?

I have found a work around for this on the RB493G which have 2 switch chips. One with 4 ports and one with 5. It does waist 2 ports but it will allow you to access the router locally from an untagged port. In my setup I put a jumper from port 5 to port 6, connecting the two switch chips together thr...
by Wyoming
Tue Jun 29, 2010 6:10 pm
Forum: General
Topic: Mini PCI Serial Cards
Replies: 19
Views: 2850

Re: Mini PCI Serial Cards

I never understood the level of peoples technical knowledge. You somehow figured out how to transmit a radio thru Routerboards com port, but you can't figure out which devices do you need and if they would work. How come? I have found several devices that will work for what I need, The questions I ...
by Wyoming
Tue Jun 29, 2010 7:40 am
Forum: General
Topic: Mini PCI Serial Cards
Replies: 19
Views: 2850

Re: Mini PCI Serial Cards

The Problem is that this is a solar site so we have very limited power and a server or even a cisco router takes a lot more power than a single mikrotik. Also I don't need hardware flow control for these radios. Since no one seems to know if there are any cards out there that will work with ROS, I w...
by Wyoming
Tue Jun 29, 2010 12:10 am
Forum: General
Topic: Mini PCI Serial Cards
Replies: 19
Views: 2850

Re: Mini PCI Serial Cards

I need RS232. I have found several Mini PCI cards that have 4 RS232 ports on them but I don't know if ROS will recognize them and be usable. That is what I really need to know. Are there any cards that are known to work with ROS. I have tested it with one serial port and it works as expected so I kn...
by Wyoming
Mon Jun 28, 2010 8:50 pm
Forum: General
Topic: Mini PCI Serial Cards
Replies: 19
Views: 2850

Re: Mini PCI Serial Cards

Routerboard will have an IP, Say X.X.X.X and that IP will point to a port on the Routerboard Say Serial1. port remote-access add local-address=X.X.X.X port=serial1 Then when you connect to X.X.X.X say through telnet it will send that on to the serial port and you can then communicate with the radio....
by Wyoming
Mon Jun 28, 2010 8:35 pm
Forum: General
Topic: Mini PCI Serial Cards
Replies: 19
Views: 2850

Re: Mini PCI Serial Cards

We are going to be using it to connect up some radio systems that are serial radios. We need it so we can connect to the serial radios over our High Speed back hauls that are IP based. Basically it will be a multiport serial to ethernet converter.
by Wyoming
Mon Jun 28, 2010 5:48 pm
Forum: General
Topic: Mini PCI Serial Cards
Replies: 19
Views: 2850

Mini PCI Serial Cards

Does anyone know of any Mini PCI Serial Cards (RS-232) that work with Mikrotik ROS. A multiport version would be best but a single port version would work if that is all that is supported.

Thanks
Phil
by Wyoming
Mon May 10, 2010 7:51 pm
Forum: General
Topic: Adding VLans to VRRP interface
Replies: 3
Views: 925

Re: Adding VLans to VRRP interface

VRRP uses a Broadcast domain to communicate between the two routers but it doesn't need a VRRP instance for each broadcast domain. You can have many broadcast domains on a single interface. So I figured out my problem. In my test setup I was connecting to a VRRP instance that was running in the Eth1...
by Wyoming
Mon May 10, 2010 6:43 pm
Forum: General
Topic: Adding VLans to VRRP interface
Replies: 3
Views: 925

Adding VLans to VRRP interface

I am trying to setup a VRRP setup. I have this all setup and it will work if I set it up as follows. Eth1 VLan 1 VRRP Vlan 2 VRRP What I want to do is set it up as follows. Eth1 VRRP Vlan 1 Vlan 2 I can not get this to work. I do get an arp entry for the gateway but I can not get any traffic to pass...
by Wyoming
Thu Jan 29, 2009 6:56 pm
Forum: General
Topic: ROS - Show Interface CRC error
Replies: 7
Views: 4656

Re: ROS - Show Interface CRC error

I would also like to see this feature added.
by Wyoming
Thu Mar 27, 2008 7:18 am
Forum: General
Topic: Power Monitoring
Replies: 6
Views: 1170

Re: Power Monitoring

Thank you for all the ideas, I am trying to find a way to monitor the power that I can use the existing network to sent the message so I don't need any additional costs such as a cell phone. The installation of a device that is powered off the AC that will die when the power drops has also crossed m...
by Wyoming
Thu Mar 27, 2008 7:10 am
Forum: Scripting
Topic: backup over ftp?
Replies: 5
Views: 2566

Re: backup over ftp?

For my solution I wrote a Perl script that use telnet and ftp. The script has a config file and a list file that contains all the information needed to login to the mikrotiks and a list of the IPs of the mikrotiks. The perl script then runs through the list of mikrotik IPs and logs into them via tel...
by Wyoming
Wed Mar 26, 2008 7:09 pm
Forum: General
Topic: Power Monitoring
Replies: 6
Views: 1170

Power Monitoring

I am rebuilding a site so that it is going to run straight DC to all the equipment on site. So the AC power will come into the nema box and from that it will go to a AC to DC converter. Of this I will wire all the equipment up to the AC to DC converter along with some batteries to back up the site i...
by Wyoming
Tue Feb 26, 2008 6:42 pm
Forum: General
Topic: Checking route via terminal on BGP MT having 300k routes
Replies: 2
Views: 617

Re: Checking route via terminal on BGP MT having 300k routes

Try something link this,

/ip route print from=[/ip route find dst-address="xxx.xxx.xxx.xxx/xx"]
by Wyoming
Fri Dec 14, 2007 9:14 pm
Forum: Wireless Networking
Topic: RB112 Station Bridge
Replies: 4
Views: 962

Re: RB112 Station Bridge

Ok, you must not under stand what I have here. so he is my attempt at a simple drawing of the setup. GW Router --ethernet-- Mikrotik 532 ----wireless link---- Mikrotik 112 --ehternet-- customer The Gateway Router has the following setup. Gw router has 10.10.135.1/26 on ethernet interface. The Mikrot...
by Wyoming
Fri Dec 14, 2007 7:32 pm
Forum: Wireless Networking
Topic: RB112 Station Bridge
Replies: 4
Views: 962

RB112 Station Bridge

I have the following setup. I have a router with the IP of 10.10.135.1/26 connected to a mikrotik 532. The 532 has a WAN interface and a SR2 Wireless card bridged together and they have the IP of 10.10.135.4/26. I then have a RB 112 in an antenna enclosure connected to the rb532. Then the ethernet o...
by Wyoming
Tue Nov 20, 2007 1:41 am
Forum: General
Topic: Bridging IPIP Tunnels
Replies: 2
Views: 1460

Bridging IPIP Tunnels

I am having problems bridging the IPIP tunnel to other interfaces. I am on version 2.9.48 and I create the IPIP tunnel. Then when I go to add it to a bridge the Tunnel is not in the list. Is it possible to bridge IPIP tunnel to other interfaces? Right now I am not able to do that and I can't get the...
by Wyoming
Fri Aug 24, 2007 6:13 pm
Forum: General
Topic: Web Proxy Issue
Replies: 4
Views: 1353

Re: Web Proxy Issue

That is easier said than done. I will work on it next week some time and let you all know if it fixes the issue.
by Wyoming
Wed Aug 22, 2007 7:22 pm
Forum: General
Topic: Web Proxy Issue
Replies: 4
Views: 1353

Re: Web Proxy Issue

The DNS settings are fine in the mikrotik. It is pointed to the same dns servers my computer is and when I am not going through the proxy it pulls up the correct page. # aug/22/2007 09:21:51 by RouterOS 2.9.26 # software id = GZF8-Z10 # / ip web-proxy set enabled=yes src-address=0.0.0.0 port=3128 ho...
by Wyoming
Tue Aug 21, 2007 6:28 am
Forum: General
Topic: Web Proxy Issue
Replies: 4
Views: 1353

Web Proxy Issue

I have the web proxy running on some of my Mikrotiks. The problem I am having is that when a user tries to go to http://www.casperairmodelers.org they get the page http://www.spammer.com. I have tried this and I am also getting this page when trying to go to the web page through a proxy. If I don't ...
by Wyoming
Fri Feb 23, 2007 6:37 am
Forum: General
Topic: Another Question About Queues
Replies: 2
Views: 688

I am trying to figure out the buffering on the queues. So each queue gets 50 packets before it starts dropping packets. I am trying to make sure that it isn't the entire set of queues assigned to that queue type doesn't get the 50 packet buffer.
by Wyoming
Fri Feb 23, 2007 6:08 am
Forum: General
Topic: Another Question About Queues
Replies: 2
Views: 688

Another Question About Queues

I have a quick question. When you build a simple queue you add a queue type to it. Now say that queue type is pfifo with a size of 50 packets. Now lets say you create two simple queue both with the same queue type. My question is does each simple queue get 50 packets each or do they share the 50 pac...
by Wyoming
Tue Jan 30, 2007 6:08 pm
Forum: General
Topic: Invalid IPs
Replies: 1
Views: 536

Invalid IPs

I am running on Version 2.9.6 right now and for some reason all IPs in the IP address list have changed to invalid. The box is still up and running and I am able to get to it. I was just wondering if this was a bug with this version? Does this affect performance in any way?

Thanks
by Wyoming
Wed Dec 20, 2006 10:56 pm
Forum: General
Topic: default route with RIP
Replies: 6
Views: 1340

My next problem is I can't find a routing-test package for router boards. Do you know where I can get one? I can't seem to find it on their site.

Thanks
by Wyoming
Wed Dec 20, 2006 10:44 pm
Forum: General
Topic: default route with RIP
Replies: 6
Views: 1340

Ok. Then the regular routing package doesn't have it. I will have to update to the Routing test package.

Thanks for you help
by Wyoming
Wed Dec 20, 2006 10:38 pm
Forum: General
Topic: default route with RIP
Replies: 6
Views: 1340

Where do you turn that on at? There is no place to turn on redistribute default in the Rip Setting.

Thanks
by Wyoming
Wed Dec 20, 2006 9:31 pm
Forum: General
Topic: default route with RIP
Replies: 6
Views: 1340

default route with RIP

I can't seem to get RIP to redistribute the Default route to other routers. Does anyone know how to do this. I have it setup in the main Mikrotik and that mikrotik set to redistribute static routes but it will not show up in the other mikrotik.

Thanks
by Wyoming
Tue Nov 21, 2006 6:56 am
Forum: RouterBOARD hardware
Topic: Netinstall with RB532
Replies: 5
Views: 1928

I tried the r option and still nothing. I didn't try a known good RB532 so i will try that when I have a few minutes and see if they show up in my netinstall. At least then I will know if I have a good install of netinstall or not. I have also tried through a switch and without a switch with a cross...
by Wyoming
Tue Nov 21, 2006 2:20 am
Forum: RouterBOARD hardware
Topic: Netinstall with RB532
Replies: 5
Views: 1928

I already did that and the netinstall utility will not see the RB. Sorry if I mislead you on second post. That is what I get when I try to boot regularly. If I try the boot from ethernet I just see it waiting for the server but the server never sees it.
by Wyoming
Tue Nov 21, 2006 12:20 am
Forum: RouterBOARD hardware
Topic: Netinstall with RB532
Replies: 5
Views: 1928

Here is what I get in the console when I try to boot the RB

Loading kernel from nand... OK
setting up elf image... OK
jumping to kernal code
Kernel panic: No init found. Try passing init= option to kernal.
by Wyoming
Tue Nov 21, 2006 12:14 am
Forum: RouterBOARD hardware
Topic: Netinstall with RB532
Replies: 5
Views: 1928

Netinstall with RB532

I have a RB532 that I was upgrading and it lost power during the upgrade. Now it will not boot and I can't get netinstall to even recognize that the RB is there. Does anyone have any suggestions that I can try to get the OS loaded again without losing my licence.

Thanks
by Wyoming
Fri Oct 27, 2006 11:23 pm
Forum: Scripting
Topic: Error in script
Replies: 3
Views: 1083

For anyone else that needs this I got it figured out.

:set name ($v1 . $v2)
by Wyoming
Fri Oct 27, 2006 8:48 pm
Forum: Scripting
Topic: Error in script
Replies: 3
Views: 1083

Or if this doesn't work is there any way and can take two variables and add them together.

:local v1 "firstname"
:local v2 "lastname"

:local FN v1+v2

I tried the + and the . and I can't get either of them to work.

Thanks
by Wyoming
Fri Oct 27, 2006 6:48 pm
Forum: Scripting
Topic: Error in script
Replies: 3
Views: 1083

Error in script

Can anyone see why this isn't working? I have tried putting () around it and that won't work either. I am out of ideas.
set 45 name = [:pick [/queue simple get 45 name] 0 28]."-RES"
Thanks
by Wyoming
Wed Jul 19, 2006 10:37 pm
Forum: General
Topic: Web Cache Drive
Replies: 0
Views: 640

Web Cache Drive

Is there a way to monitor the Web Cache Drive when we add a drive to the secondary IDE slot for the web cache. We did some test where we setup the web-proxy and while we were surfing the web we unpluged the IDE cable from the drive to simulate a drive failure. The Web-Proxy did great. It kept on run...
by Wyoming
Wed Jul 05, 2006 5:39 pm
Forum: RouterBOARD hardware
Topic: Proper Grounding of RB
Replies: 3
Views: 1986

On ours when we received them only the four corner holes where used for mounting the Routerboard. Do these also ground the routerboard? Do you attach a wire to the routerboard and to the case or just to the case and use the mounts to ground the Routerboard?

Thanks
by Wyoming
Mon Jul 03, 2006 8:25 pm
Forum: RouterBOARD hardware
Topic: Proper Grounding of RB
Replies: 3
Views: 1986

Proper Grounding of RB

We have been having a couple RB532s die on us recently. From looking at the RB and the Nema enclosure we are using we don't see any grounding lugs. My main question is what is the proper way to ground the RB? Do you connect the ground to the Case and the RB or just the case? Thanks for any help you ...
by Wyoming
Fri Jun 02, 2006 12:56 am
Forum: Scripting
Topic: FTP Backups possible?
Replies: 11
Views: 5443

For this script I have 3 files. One is the actual script that runs. It is the .PL file. The next file is a configuration file. It stores the configurations for the script such as where the backups will be placed, passwords, etc... The last file is a list of the mikrotiks and the name of the backup i...
by Wyoming
Wed May 31, 2006 8:02 pm
Forum: Scripting
Topic: FTP Backups possible?
Replies: 11
Views: 5443

I just used Perl to write a script that runs each night and logs into the router to create a backup file and then it ftps the file off the router to the server runing the perl script to a specified directory. So yes it is possible to write a script that will ftp backups off the router. I am not sure...
by Wyoming
Tue May 02, 2006 1:51 am
Forum: Wireless Networking
Topic: 3 SR2s in a P2 400 box???
Replies: 1
Views: 671

3 SR2s in a P2 400 box???

I have a pentium II 400 mhz computer and I am trying to put 3 SR2s in it. One for each 120 degree sector. I built up this box and put it into place last night and everything came up and seemed to be working fine last night. This morning when I came in we went from 18 clients connnected to sector 2 d...
by Wyoming
Fri Apr 14, 2006 9:42 pm
Forum: General
Topic: BETA Testing and Feature Suggestions for next routeros
Replies: 329
Views: 76688

I would like to see better statistics for the interfaces. Such as Errors on the ethernet interfaces. Maybe Broadcast counters, Collision counters, etc.
by Wyoming
Mon Feb 20, 2006 5:38 pm
Forum: General
Topic: Connection Limit question?
Replies: 9
Views: 2332

I have tried both. A setting with Syn only and one with all packets. The rule does seem to catch more when i have it set to all packets instead of syn only. But the limit is still not working. I do have the connection timeout set to a lower number than the default. I also have manually gone in an cl...
by Wyoming
Fri Feb 17, 2006 7:15 pm
Forum: General
Topic: Connection Limit question?
Replies: 9
Views: 2332

For some reason my rules don't seem to be working either way with P2P traffic. In the connections I am seeing that the mikrotik is determining that the connection if for a p2p program but then as I watch the number of connection that are established just keep climbing. after implementing these two r...
by Wyoming
Fri Feb 17, 2006 5:31 pm
Forum: General
Topic: Connection Limit question?
Replies: 9
Views: 2332

I know 32 is for each user. But does it limit them to only ten from their address and 10 to their address or does it limit them to 10 to and from their address? I was messing arround with this last night and it seems that it was only limiting them to 10 connections to their address as I watched more...
by Wyoming
Fri Feb 17, 2006 6:03 am
Forum: General
Topic: Connection Limit question?
Replies: 9
Views: 2332

Connection Limit question?

When we are setting up a connection limit. When we say 10 connections are allowed for a netmask of 32. What address is that based on. Does it limit it to 10 connections for the source address, destination address, or both addresses combined?

Thanks
by Wyoming
Tue Feb 14, 2006 10:16 pm
Forum: General
Topic: Ethernet port bumping up/down
Replies: 18
Views: 4189

I was also seeing this with one of my RB532s. To get a stable link on ours we set the other device to 10 full and the link came up stable at 10 full when it was set to auto. If I set the other device to 100 full then the link just bounces over and over again.
by Wyoming
Tue Feb 14, 2006 1:52 am
Forum: General
Topic: BAckup file naming
Replies: 10
Views: 3859

if you use the full command you can name the file anything you want.

system backup save name=name.bak
by Wyoming
Tue Jan 31, 2006 11:50 pm
Forum: General
Topic: fiber network cards and gigabit tehnology
Replies: 3
Views: 2955

What is the Model number of the card you tested?

Thanks
by Wyoming
Thu Jan 19, 2006 2:10 am
Forum: General
Topic: RIP Distributing a Default route
Replies: 1
Views: 579

RIP Distributing a Default route

Is there a way to distribute the default route with RIP v2 on the Mikrotiks? I am looking and I can't seem to find anything that will allow me to distribute the default route to the other routers.

Thanks
by Wyoming
Wed Jan 18, 2006 2:37 am
Forum: General
Topic: PoE Switches
Replies: 15
Views: 3983

There are jumpers on the RB that allow you to select what voltage of POE you use. JP3 & 4 allow you to select between different voltages. From the Documentation IEEE802.3af Power over Ethernet: 12V or 48V DC Power jack/header 6..24V or 25..56V DC jumper selectable There is some fine print on the edg...
by Wyoming
Wed Jan 18, 2006 2:32 am
Forum: General
Topic: Licensing question
Replies: 2
Views: 2413

I belive that level 3 licences are ones that were made to take the place of the original Licences. When we first bought Mikrotiks they only had one licence. Since then they have implemented the tiered approch they have now. So if you had a original licence from before they had different levels and t...
by Wyoming
Fri Dec 30, 2005 6:24 pm
Forum: General
Topic: Radius Attribute for Local Address in PPPoE Profiles
Replies: 13
Views: 4606

I was just looking and if you create users on the mikrotik it gives you the ability to select which profile that user will use. Why is this not supported in radius to allow you to send which profile a user will use? This is exactly what I need but I can't find anything in radius to support this. Tha...
by Wyoming
Wed Dec 28, 2005 9:55 pm
Forum: General
Topic: Radius Attribute for Local Address in PPPoE Profiles
Replies: 13
Views: 4606

I have found this attribute, Ascend-Client-Gateway, but is shows it is only supported for hotspot users. Is this ever going to be supported for PPP users?

I believe this is what I need but it doesn't appear to be supported.

Thanks
by Wyoming
Tue Dec 27, 2005 7:58 pm
Forum: General
Topic: Radius Attribute for Local Address in PPPoE Profiles
Replies: 13
Views: 4606

Anyone else have any ideas????

Thanks
by Wyoming
Tue Dec 27, 2005 6:42 pm
Forum: General
Topic: ethernet stats
Replies: 6
Views: 3352

I also agree that this is needed. If they have the oids set up to get it from MRTG then the stats are there. It shouldn't be to big of a leap to add them to the interface in winbox.
by Wyoming
Fri Dec 23, 2005 10:53 pm
Forum: General
Topic: Radius Attribute for Local Address in PPPoE Profiles
Replies: 13
Views: 4606

The only problem is that the local pool attribute changes the client address to use the pool not the local address. I have looked and I have not been able to find any radius attribute that allows you to select which ppp profile to use. If I can find that then all my problems will be solved.

Thanks
by Wyoming
Wed Dec 21, 2005 12:45 am
Forum: General
Topic: Radius Attribute for Local Address in PPPoE Profiles
Replies: 13
Views: 4606

Well the problem I am running into is that I have two different local addresses on the same interface. If I leave the local address field blank then it won't work. If I build to servers and set one of the Two IPs in each of them then it will always assign the ip of the last server in the list as the...
by Wyoming
Mon Dec 19, 2005 8:50 pm
Forum: General
Topic: Radius Attribute for Local Address in PPPoE Profiles
Replies: 13
Views: 4606

Radius Attribute for Local Address in PPPoE Profiles

Is there a Radius Attribute that sets the local Address in the PPP Profiles. I know there is one for Remote address but I need one to set the gateway address for the Users. Also is there one for DNS server? DNS is not as big of a deal but it would be nice to have.

Thanks in advance.
by Wyoming
Fri Dec 16, 2005 5:49 pm
Forum: General
Topic: 2.9.10 is up
Replies: 2
Views: 938

Was this bug only seen with the RB500 package or was it in all versions? And has anyone tried version 2.9.10 yet? The reason I ask is that the change log says it was only on RB500 version. fixed problem - bridge configuration was not kept on upgrade on RB500 And I don't want upgrade any of my out of...
by Wyoming
Tue Dec 13, 2005 11:35 pm
Forum: General
Topic: Interface status issues
Replies: 3
Views: 1414

Is this a known bug and is it going to be fixed anytime soon?
by Wyoming
Tue Dec 13, 2005 9:24 pm
Forum: General
Topic: Interface status issues
Replies: 3
Views: 1414

Interface status issues

Has anyone else seen weird behavior with the interface status. I have been seeing interface that won't display what they are linked at and also some that say they are up at 100 full and they don't have a cable pluged in to them. Just wondering if anyone else has been seeing these issues?

Thanks
by Wyoming
Fri Dec 09, 2005 12:50 am
Forum: General
Topic: QoS
Replies: 0
Views: 749

QoS

Does mikrotik do anything with the CoS field and if so is there a way to have it translate the CoS information and populate the ToS field with it?

Thanks
by Wyoming
Tue Nov 15, 2005 8:59 pm
Forum: Scripting
Topic: Compare Time
Replies: 2
Views: 2378

I really only needed to see if it was after 5 or not so I just used this line.

:if ([:pick [/system clock get time] 0 2] >= 17) do={}

Thanks for your help.
by Wyoming
Tue Nov 08, 2005 6:05 pm
Forum: Scripting
Topic: Script problem
Replies: 3
Views: 1361

Reinstalling with netinstall would be very difficult as I have around 30 mikrotiks out in the field and most of them are over 100 miles away from me in different towns. Since all are in production I will also have to do this between the hours of 12am and 5am. Does the new Time feature in simple queu...
by Wyoming
Tue Nov 08, 2005 6:04 pm
Forum: Scripting
Topic: Script problem
Replies: 3
Views: 1361

Reinstalling with netinstall would be very difficult as I have around 30 mikrotiks out in the field and most of them are over 100 miles away from me in different towns. Since all are in production I will also have to do this between the hours of 12am and 5am. Does the new Time feature in simple queu...
by Wyoming
Mon Nov 07, 2005 7:10 pm
Forum: Scripting
Topic: Script problem
Replies: 3
Views: 1361

Script problem

I have 3 scripts. The first script calls the other two scripts and runs them. The scripts are: /system script run [/system script find name="DayQueues"] /system script run [/system script find name="NightQueues"] :if ([:pick [/system clock get time] 0 2] >= 17) do={ /queue simple dis [/queue simple ...
by Wyoming
Tue Nov 01, 2005 1:55 am
Forum: Wireless Networking
Topic: oid for number of Register clients
Replies: 7
Views: 2598

I am working on a script to do this but I was just wondering why it doesn't have an oid already. I am sure almost everyone that runs the Mikrotik as an AP would like to graph this kind of information. I just think that and oid would make it a lot simpler to graph than having to write a script to con...
by Wyoming
Mon Oct 31, 2005 9:11 pm
Forum: Wireless Networking
Topic: oid for number of Register clients
Replies: 7
Views: 2598

oid for number of Register clients

Is there an oid for the number of registered clients on an AP? I have looked all over for one and I can't find one. If not is there a possibility that one could be added in the future?

Thanks
by Wyoming
Thu Oct 27, 2005 1:48 am
Forum: Scripting
Topic: Compare Time
Replies: 2
Views: 2378

Compare Time

is there a way to compare time values in scripts.

Say is the current time greater than 17:00:00.

I tried this.

:if ([/system clock get time] > "17:00:00") do={}

but is always returns false.

Thanks for any help.
by Wyoming
Fri Oct 21, 2005 6:58 pm
Forum: Scripting
Topic: PPPoE Queues
Replies: 10
Views: 3518

I have this figured out now. Thank you for your help Eugene. What I did was make a Queue that I disabled at the top of the list with a special name. I then used that to find the location of the top of the list and move the Dynamic Queues above that. Here is the working script. :foreach I in=[/queue ...
by Wyoming
Fri Oct 21, 2005 5:32 pm
Forum: Scripting
Topic: PPPoE Queues
Replies: 10
Views: 3518

You have me confused then. The 0 in my script is the position where I am trying to move the queue to. So how would I use the find statement to find the first location. Do you have any suggestions that would work better for me on this script? I really need something that will move the dynamic queues ...
by Wyoming
Tue Oct 18, 2005 5:43 pm
Forum: Scripting
Topic: PPPoE Queues
Replies: 10
Views: 3518

No one can see any problem with this script? If not then why isn't it working?

Thanks
by Wyoming
Wed Oct 12, 2005 9:10 pm
Forum: Scripting
Topic: PPPoE Queues
Replies: 10
Views: 3518

:foreach I in=[/queue simple find dynamic=yes] do={ /queue simple move $I 0 :log info ("moved " . $I) } Can anyone tell me why this isn't working. Everything I have tried doesn't make a difference. The scrip above will only move the script to the bottom of the list of queues. I wan't it to move it t...
by Wyoming
Wed Oct 12, 2005 1:44 am
Forum: Scripting
Topic: Only half of the script is running
Replies: 1
Views: 906

I have totally rewritten the scripts I was using. Then new script seems to be working a lot better then the old on was. I will give it a few days and see how things go with the new one.
by Wyoming
Wed Oct 12, 2005 1:38 am
Forum: Scripting
Topic: PPPoE Queues
Replies: 10
Views: 3518

If I manually move the queue to somewhere near the top of the list of queues, I have found that no matter what I put into this script for the location to move it to, It will move the Dynamic queue back to the bottom of the list queues.

Thanks for any help you can give me.
by Wyoming
Wed Oct 12, 2005 1:19 am
Forum: Scripting
Topic: PPPoE Queues
Replies: 10
Views: 3518

PPPoE Queues

I have PPPoE set up on my mikrotik but when it adds the simple queue it adds it at the bottom of the list. Is there a way to change where it will add it? I wrote a script to move it to the top of the queue list but I can't get it to work. Can anyone see any problems with this script. Thanks :foreach...
by Wyoming
Tue Oct 11, 2005 12:49 am
Forum: Scripting
Topic: Only half of the script is running
Replies: 1
Views: 906

Only half of the script is running

I have a couple of scripts and when I select them and click run on the script box in Winbox they run fine. If I use the command line /system script run [/system script find name=SwapSpeedDay] to run the certain script only part of it runs. It is like it skips the first part where it enables all the ...
by Wyoming
Sat Sep 10, 2005 12:52 am
Forum: General
Topic: RB532 Hotspot Directory not showing in Files
Replies: 1
Views: 627

RB532 Hotspot Directory not showing in Files

I have a new RB532 and none of the files are showing up in the file list. I am running 2.9.1 and I have tried to downgrade to 2.9 and upgrade to 2.9.1 again and I still don't see any files listed in the file list. Has anyone else seen this? I have a machine running 2.9.1 on a regular pc and it is sh...
by Wyoming
Tue Sep 06, 2005 9:51 pm
Forum: General
Topic: PPPoE Speed Change
Replies: 1
Views: 669

One way would be to change the Queue Type. Is there a radius attribute to set the Queue type?
by Wyoming
Tue Sep 06, 2005 9:50 pm
Forum: General
Topic: PPPoE Speed Change
Replies: 1
Views: 669

PPPoE Speed Change

I am trying to set up the mikrotik so that it sets up PPPoE connections with our clients. I have this all figured out. What I need it to do is, everyday at 5:00 am and 5:00 pm, change the speed of the queues that the customers are on. The problem I am running into is that not all of our clients get ...
by Wyoming
Thu Sep 01, 2005 8:30 pm
Forum: General
Topic: PPPoE with Radius
Replies: 4
Views: 1255

i figured this out. It was an error in the radius attributes that the radius server was sending.
by Wyoming
Wed Aug 31, 2005 6:17 pm
Forum: General
Topic: PPPoE with Radius
Replies: 4
Views: 1255

Ok. I now have the PPPoE working with our radius box. Radius was missing a module. Now I am having problems getting the mikrotik to take the Rate-Limit attribute. I have the attribute in our dictionary and it is set up in our users file but when the user logs in no queue is built for that user. Any ...
by Wyoming
Thu Aug 18, 2005 8:51 pm
Forum: General
Topic: Home Page Redirect
Replies: 5
Views: 2061

We found a better way to do this. We just modified the HTML Login page to redirect to the page we wanted once the user logs in. This seems to work very well and it will work for any web page.
by Wyoming
Thu Aug 18, 2005 7:45 pm
Forum: General
Topic: Home Page Redirect
Replies: 5
Views: 2061

That is exactly what I am trying to achive. I want to only redirect the first http request after login to a certain page then from there the user can navigate anywhere they would like.
by Wyoming
Thu Aug 18, 2005 7:14 pm
Forum: General
Topic: Home Page Redirect
Replies: 5
Views: 2061

Home Page Redirect

Does anyone know if there is a way to do a homepage redirct with the Mikrotik hotspot?

Thanks
by Wyoming
Thu Aug 18, 2005 12:28 am
Forum: General
Topic: PPPoE with Radius
Replies: 4
Views: 1255

PPPoE with Radius

I am having problems getting this set up and running. I have a Mikrotik that is running 2.9rc10 right now. I had it on 2.8.28 and it was showing the same results. If I use the windows XP built in PPPoE client with a UN and PW on a radius server to connect I get an error saying that username or passw...
by Wyoming
Wed Aug 17, 2005 2:09 am
Forum: General
Topic: PPP Profiles Attibute for Radius
Replies: 0
Views: 523

PPP Profiles Attibute for Radius

Is there a way to build multiple profiles for PPP conections and have radius send which profile a user should use? I have been look and all the radius attributes and I have been unable to find one.

Thanks
by Wyoming
Tue Jul 26, 2005 12:10 am
Forum: General
Topic: Router performace
Replies: 0
Views: 508

Router performace

Does anyone have any documentation on the performace of the RB532 when running encrypted links. We are designing a network and would like some statistics on the performance of the mikrotik while using IPSEC with 3DES encryption over the links.

Thanks
by Wyoming
Fri Jul 15, 2005 12:43 am
Forum: General
Topic: Disk crasher - backup file invalid
Replies: 6
Views: 1194

When I first started backing up our Mikrotiks I was just backing up them up and then ftping the file off to another server. When I ftped the backup back onto the Mikrotik it would give me the file to short error. I modified my script to use ftp in binary mode for the transport and I used binary mode...
by Wyoming
Thu Jul 14, 2005 5:48 pm
Forum: RouterBOARD hardware
Topic: UL rating
Replies: 3
Views: 1739

UL rating

Does anyone know if routeboards are UL Rated?

Thanks
by Wyoming
Thu Jun 16, 2005 6:05 pm
Forum: RouterBOARD hardware
Topic: Vlan and 802.1Q Tagging
Replies: 1
Views: 1733

Vlan and 802.1Q Tagging

Do the NICs on the RB530 models and the daughter boards support VLANs and 802.1Q tagging?

Thanks
by Wyoming
Tue Jun 07, 2005 9:59 pm
Forum: General
Topic: Single IP wont respond to ping
Replies: 3
Views: 995

What did you have to do to get it to work? I am having a similar problem and I would like to know how you got yours working.

Thanks
by Wyoming
Fri May 27, 2005 1:04 am
Forum: Scripting
Topic: run script from terminal
Replies: 2
Views: 34013

I figured it out.

system script run [system script find name="name of script"]

Thanks
by Wyoming
Fri May 27, 2005 12:28 am
Forum: Scripting
Topic: run script from terminal
Replies: 2
Views: 34013

run script from terminal

I need a way to run a command from the terminal without having to do the print command first. Is there a way to run them by name instead of by number? Such as system script run name="script" instead of system script run 0. I need this as I am making a perl script that will run these scripts remotely...
by Wyoming
Thu Apr 21, 2005 1:04 am
Forum: General
Topic: Restoring backups
Replies: 3
Views: 822

I found the problem to be that when I made the backup script we use that I forgot to tell it to use binary mode to transfer the files. This would mess up the size of the file so that when I used FTP to put the file back on the other mikrotik the size of the file wouldn't match. This caused the error...
by Wyoming
Tue Apr 19, 2005 8:07 pm
Forum: General
Topic: Restoring backups
Replies: 3
Views: 822

I finally got a good backup off the original box and got it installed on the new one.
by Wyoming
Tue Apr 19, 2005 7:49 pm
Forum: General
Topic: Restoring backups
Replies: 3
Views: 822

Restoring backups

I am trying to restore a backup of a mikrotik. I FTP the file off the original one and then onto another one. When I click Restore I get and error message. "Couldn't restore configuration - file too short (6)"

What is this error and How do I get it to work?

Thanks in advance.
by Wyoming
Mon Apr 04, 2005 9:09 pm
Forum: General
Topic: NTP - Daylight Savings
Replies: 9
Views: 3829

I agree that the server should serve the time in UTC but It would be nice if we could get the clock on the Mikrotik to be able to change for daylight savings. That way we don't have to go out to 40 different Mikrotiks and change the timezone from -7 to -6 and -6 to -7 every spring and fall.
by Wyoming
Mon Mar 21, 2005 8:25 pm
Forum: General
Topic: Simple Queue
Replies: 1
Views: 919

Simple Queue

We use Simple queues to traffic shape all our customers. This all has been working fine except for one customer we just found. We set up rules for each customer and then for all our equipment. Then at the end of the queues we set up a catch all queue to catch any other traffic so that our customer c...
by Wyoming
Tue Feb 22, 2005 8:51 pm
Forum: General
Topic: Simple Queues with Bridged Interfaces
Replies: 3
Views: 1269

I have this running just not the way we would like to run it. By switching the interface to all, all traffic is then caught by the queues. Why is it when you set the interface to the bridge interface does it only catch the traffic one way?

Thanks
by Wyoming
Mon Feb 21, 2005 11:18 pm
Forum: General
Topic: Simple Queues with Bridged Interfaces
Replies: 3
Views: 1269

Oh. and just so you know. I am running 2.8.17 code.
by Wyoming
Mon Feb 21, 2005 10:06 pm
Forum: General
Topic: Simple Queues with Bridged Interfaces
Replies: 3
Views: 1269

Simple Queues with Bridged Interfaces

I have two ethernet interfaces bridged together, Ether1 and Ether2. These interfaces are part of a Bridge interface named bridge. I Then have an IP on the bridge interface. When I set up a Simple queue for a customer with the interface set to bridge, the queue will only show traffic on the tx side a...
by Wyoming
Tue Jan 18, 2005 11:52 pm
Forum: General
Topic: Help with Firewall Chain
Replies: 10
Views: 2095

I understand the forward rule part of what you are doing. Now For the established connections rule, Did you move this rule to the top of the list? I am assuming you did but I just wanted to make sure. Also, for the action what are you selecting? accept or passthrough? If you could print the rules in...
by Wyoming
Tue Jan 18, 2005 5:49 pm
Forum: General
Topic: Help with Firewall Chain
Replies: 10
Views: 2095

You probably need a rule to allow established connections back through the firewall. To me it sounds like your traffic is making it out to the site you are attempting to view but the return traffic is being blocked by you firewall. You need to set up a rule that allows traffic back through the firew...
by Wyoming
Mon Jan 17, 2005 5:36 pm
Forum: Scripting
Topic: Working days - How?
Replies: 3
Views: 5433

To handle this we just use another two scripts and scheduler events. These extra scripts disable the scheduler on weekends and enable them weekdays. Here is an example of the scripts. StartWeek Script :foreach I in=[/system scheduler find name=DaySwitch] do={ /system scheduler enable $I } :foreach I...
by Wyoming
Thu Dec 09, 2004 8:47 pm
Forum: General
Topic: Questions about Masquerading and NAT rules
Replies: 12
Views: 4215

is there another way to group the two blocks(x.x.128.0/21 and x.x.136.0/23) together so that they are both NATed to the same block(y.y.105.214 - y.y.105.254) with out using the mangle rule? And would my current setup cause any problems with logging into applications such AOL Instant Messanger or Sec...
by Wyoming
Thu Dec 09, 2004 5:36 pm
Forum: General
Topic: Questions about Masquerading and NAT rules
Replies: 12
Views: 4215

We are running on 2.8.17 code right now but I have a test box with 2.8.19 on it and we are seeing the same behavior. We have the rules set up as follows. We are using Mangle to mark the traffic with flow marks. 0 src-address=x.x.128.0/21 in-interface=Border action=passthrough mark-flow=mark1 1 src-a...
by Wyoming
Thu Dec 09, 2004 2:23 am
Forum: General
Topic: Questions about Masquerading and NAT rules
Replies: 12
Views: 4215

We got the SRC-NAT rules up and running now but we are having major problems with users being able to access AIM and Secure Web sites. Anyone have any Ideas as to why that would be?

Thanks
by Wyoming
Fri Dec 03, 2004 5:54 pm
Forum: General
Topic: Questions about Masquerading and NAT rules
Replies: 12
Views: 4215

Questions about Masquerading and NAT rules

I am trying to set up a mikrotik with may different nat and masquerading rules on it. I have a few questions about the ability of the mikrotik here. First, what are the connection limits of the mikrotik for NAT and Masquerading. Second, we have blocks of private IPs that need to be masqueraded to mu...
by Wyoming
Wed Dec 01, 2004 8:57 pm
Forum: General
Topic: Established connections
Replies: 1
Views: 788

I found the answer to my question. In version 2.8 it is not possible without a reboot of the router. It is a feature that will be supported in 2.9.
by Wyoming
Tue Nov 30, 2004 5:14 pm
Forum: General
Topic: max. amount of connections?
Replies: 11
Views: 2842

Also if you would like to see the number of connections you can go to the terminal and go to the IP Firewall Connections menu and type print count-only and it will show you the number of connections.
by Wyoming
Mon Nov 29, 2004 8:49 pm
Forum: General
Topic: Established connections
Replies: 1
Views: 788

Established connections

Is there a way to delete Established tcp connections?

Thanks
by Wyoming
Mon Nov 29, 2004 6:42 pm
Forum: General
Topic: Several Questions.
Replies: 1
Views: 705

Sorry I got this in the wrong forum. :)
by Wyoming
Mon Nov 29, 2004 6:39 pm
Forum: General
Topic: Several Questions.
Replies: 1
Views: 705

Several Questions.

I have several questions I need answers to. 1. Is there a way to kill established tcp connections. I have hundereds of connections in the router because the time out on the connection is set to 120 hours. is there a way to kill these connections or set a limit on the number of hours that time out is...
by Wyoming
Fri Nov 12, 2004 9:41 pm
Forum: General
Topic: LILO - Read/Checksum Error
Replies: 3
Views: 1278

We have this working now. We received two new modules yesterday and instead of using one of the old ones. I tried a new one and it works. The old modules still work in other systems, so there is some difference between them that is causing this.

Thanks
by Wyoming
Fri Nov 12, 2004 5:03 pm
Forum: General
Topic: LILO - Read/Checksum Error
Replies: 3
Views: 1278

I have tried two different flash cards in it. They seem to work find in a different machine.

Thanks
by Wyoming
Fri Nov 12, 2004 4:52 am
Forum: General
Topic: LILO - Read/Checksum Error
Replies: 3
Views: 1278

LILO - Read/Checksum Error

I installed a mikrotik 64k IDE flash module in a new machine today but it would not boot. I keep getting a LILO - Read/Checksum Error . I used netinstall to reinstall the OS(2.8.17) on the 64k IDE Flash module. After reinstalling the OS on the module it will boot up once and allow me in to configure...
by Wyoming
Tue Oct 12, 2004 12:56 am
Forum: General
Topic: User Group Attribute in Radius
Replies: 1
Views: 793

User Group Attribute in Radius

We tried to implement radius on our Mikrotik boxes a while back using the group attribute. At that time the group attribute was not supported. Has support for this been added yet? And if not is there any plans on when this will be added. I placed a post a while back and have not heard anything since...
by Wyoming
Wed Jul 07, 2004 11:09 pm
Forum: General
Topic: Support for Daylight savings time
Replies: 0
Views: 1399

Support for Daylight savings time

Support for Daylight savings time would be a nice addition.

Thanks
by Wyoming
Thu Jun 17, 2004 9:20 pm
Forum: General
Topic: answer to question : what IPs are passing traffic queues
Replies: 1
Views: 2004

This works if you are using the firewall to mangle traffic for queue trees. At this time we are using Simple queues and they don't use mangle. Also I am not finding the log option for the mangle rules. Where is this located?

Thanks
by Wyoming
Thu Jun 10, 2004 5:03 pm
Forum: General
Topic: Feature Request:
Replies: 2
Views: 1845

Thanks.
by Wyoming
Wed Jun 09, 2004 11:47 pm
Forum: General
Topic: Feature Request:
Replies: 2
Views: 1845

Feature Request:

Instead of Torch being able to work for just interfaces, it would be nice if you could use it on certain Queues also. This way you could determine what IPs are passing traffic through individual queues.

Thanks