MikroTik

avantwireless

Ironic wouldn't be the word I would choose... Not having shell access in routeros has always been a serious flaw in a great product. And that this access is there without Mikrotik for the black hats now, pretty much invalidates any reason that we shouldn't. Strange files were the easiest way of dete...

avantwireless

@normis... Ok so now I am really confused... People above point out how to see infection via a simple "ls" on the /rw directory but the ability to perform the "ls" is not available. So how the heck are we supposed to check to see if a machine is infected? And please don't point a...

avantwireless

Can you be more specific? What exactly isn't working? I've upgraded 3-4 devices to 6.34 so far and I haven't got any issues with SNMP (or anything else for that matter) using Cacti, Observium, Dude and custom scripts. We are seeing the numbers on the interfaces way lower than the actual interfaces ...

avantwireless

rc45 broke snmp, and 34 continues to have broken snmp. Going back to 41 where snmp worked...

avantwireless

Yes there is just a regular wireless package in the all packages zip file... You have to get it though the zip file... Unfortunately when you put it into the packages on the router it doesn't add it in. I was looking for help adding it in, if possible, not the obvious, "It's been replaced in th...

avantwireless

I could not get the regular wireless package be seen after uploading it to a router. What is the process to get it to be added to the packages? We see less disconnects with nstream with the regular wireless package than the fp or cm2 packages and need it for that reason.

avantwireless

Did torch get fixed? Where torch was under-reporting traffic rates? Is there a 28 version that we can test with the fix before the official release?

Nevermind, tested, and yes, fixed

avantwireless

My bad, I didn't understand that the client follows the AP regardless of client settings on Ce or eC... On it's way in a few minutes... Ticket#2015041466000208 So I have two devices that I just upgraded to 6.28 because of superior ethernet performance... One is an RB911G-HPnD the other is a RB912UAG...

avantwireless

So I have two devices that I just upgraded to 6.28 because of superior ethernet performance... One is an RB911G-HPnD the other is a RB912UAG-HPnD. They are about 1.4 miles apart with signals in the low 50/high 40's. I noticed that they were see a 20 mhz channel negotiation with channel set to 20/40 ...

avantwireless

Winbox DANGEROUS... Today I was working on a customer and, while the interface page was open tapped the d key. That disabled the highlighted interface. ONE key stroke, no Alt, no Ctl, no other input. In this case it was the wireless interface on a customer CPE and now it is down. I see this a such a...

avantwireless

Well in the final rc candidate Torch is again broken showing wildly less traffic than is really on the link, to the point that torch is unuseable... Sending e-mail is still broken for me. The issue is described here: System Error sending email timeout occurred Any chance to get that fixed? This is f...

avantwireless

Great News!!! Now that made my day! And this kind of response addressing this kind of problem with this kind of promptness needs to be applauded. Wow is that ever impressive!

Thanks!

avantwireless

For the Mikrotik folks.. How soon will there be a version out to address Ghost
http://ma.ttias.be/critical-glibc-updat ... ame-calls/

Sounds like RouterOS is probably vulnerable to this one...

avantwireless

Yes... And the ethernet port ( most likely to die from surges ) is just fine... The ability to take power over the ethernet port dies. This has only happened with 912 boards and nothing else on the same POE switches has died...

avantwireless

We just had our second 912 board die with failure of the POE adapter. It works fine powering it up using the power connector, just not over the onboard POE. Have others seen this? Any idea of what part is failing? The UART is fine, talks up a storm with power applied through the external connector, ...

avantwireless

At first turning off recalibrate worked, but over time it got just as bad.... not a fix here...

avantwireless

2shpn is still exhibiting the exact same failure mode in high noise environment. Every so on all clients are detached until reboot. Have to have a ping watchdog on most reliable client. That also prevents the watchdog on the ethernet port for other hangs...

avantwireless

I guess I should have mentioned that I used to work for Ubiquiti... Yes the majority of their software development was done in Lithuania, not one person. I cannot say if that is true today, but I cannot see a reason that they would have migrated it to the US when the team over there was a great bunc...

avantwireless

Sources of code or sources of development location? For development location look at the ubiquiti forums and who responds to development questions

https://www.linkedin.com/in/edmundasbajorinas Lithiania

avantwireless

Still points to 6.20... Could that get updated to let us know what the changes are so far?

avantwireless

Please note that UBNT s/w is developed in the same country as MT

avantwireless

Dallas, What size channel? 80mhz?

avantwireless

Hmmm, I'm curious as to what information you are digging for beyond "No bash". Seems like a problem that isn't a problem if bash isn't there. I think you are diminishing your karma by flogging a dead horse, publicly. Maybe you wanted a statement from the CEO? A guarantee? Not going to get ...

avantwireless

So a major security problem is out there with Bash variables... Cloud services are patching and rebooting EVERYTHING tonight. *ix is vulnerable.. IS MT? does the web interface execute bash? http://gadgets.ndtv.com/laptops/news/bash-exploit-can-be-used-to-take-control-of-a-computer-bigger-than-heartb...

avantwireless

Webfig works in all OS Ok so how in webfig do you "find" a routeros box with unknown or reset IP? Either that or fix winbox under linux so that the search for mac routerOS feature works under wine. At one time it did but it's not consistent enough like it would be with a native linux vers...

avantwireless

Still seeing ethernet interface flapping with QRT. Is there work ongoing to understand and fix this or is it a replace the device problem? I have installed 4 qrt with it's own PoE and the port is not flapping! (on 6.17, I must try 6.18) We have many QRT's that don't have flapping. It's not every bo...

avantwireless

Still seeing ethernet interface flapping with QRT. Is there work ongoing to understand and fix this or is it a replace the device problem?

avantwireless

I'm seeing the port flapping on a QRT and turning off auto-negotiation does not fix it. This is showing up on more devices with later versions of ROS... Time for this to get fixed!!!

avantwireless

Agreed on the 9V and up. It WAS :( one of your biggest advantages over all the Ubiquiti equipment as UBNT is very unreliable at the lower voltages and MT would work on longer cable runs with less than 24V input. We really hope that MT goes back to the lower voltages ASAP. Telecom standard? Like that...

avantwireless

Thank you... That was pretty informative and leads to info ( farther up in the thread ) that gets TCP numbers... Looks like somewhere between 170mb/s and up to 200+ mb/s.... That will make a dent... Now to figure out how to do a 3x3 MIMO dish. Is that a 2x2 MIMO dish next to a 1x1 Dish? Have people ...

avantwireless

So this board is supposed to be available either now or Real Soon Now... This is one of the first times I haven't seen MikroTik actually post any wireless performance stats of a new radio board. Does anyone have any actual performance numbers (TCP!) of 3x3 MIMO for this board ( or any other actual 3...

avantwireless

A few things... One. The pole mounting nuts (10mm) are perfectly sized with the slot in the bracket so that you can put a 10 mm speed (ratching) wrench on the nuts and tighten them down and as they get tightened up they will TRAP the speed wrench. ( some speed wrenches have to flip over to reverse a...

avantwireless

Unless we hear not to from Mikrotik we are planning on taking two of the HG's, coating one, leaving the other alone and mounting them next to each other on a noisy tower and then testing performance... Anyone from Mikrotik care to save us some work?

avantwireless

So folks I am looking at the inside of the HG and there is no coating like the SAr2 has. What would the issues be with applying a coating inside the HG similar to that the SAr2 has inside it. Is there a reason that Mikrotik didn't do that? We were hoping to use the HG in the same multiAP locations t...

avantwireless

Re: Register for new update:

http://www.mikrotik.com/download go to bottom of page...

avantwireless

Any errors ? Screenshots ? Which browser ?
I have IP on the bridge, and it works for me.

Whoa, I went back to check on specifics and was let in. Hmmm I'm thinking a browser cache problem... Cache flushed... no problem... Delete thread if you want...

avantwireless

Some sites accept the password and others that the IP address is on the bridge do not...

avantwireless

Just upgraded some links from 5.25 to 6.2 and seeing improved performance in nv2 BUT the bandwidth test now is throwing huge amounts of data in the direction not being tested. i.e. Do a send and the send direction is doing 20mb/s and the receive is doing 8mb/s... Makes testing links suspicious... I ...

avantwireless

About le board firmware upgrade. I just checked a system running 5.16 and it's already running a 2.18 version of the firmware... Are we good to go or is there another revision that needs to be loaded and shouldn't it be 2.19?

Thanks...

avantwireless

Maybe I'm just dense, but I cannot find Netinstall on the download page anymore?? Pointers?

avantwireless

BTW, I am a good Roc-Noc customer, thanks for being there!

avantwireless

D'oh, there isn't anything on the Serial port, this is an Intel MB... No help there.. But the solution was the latest BIOS from Intel..

Once I loaded that on up, all was good...

Thanks for the suggestions...

Karma?

avantwireless

Solution for the lack of rebooting on a Intel D525 board was new BIOS from Intel...

avantwireless

If you tell your 525 w/Mikrotik to reboot does it fully reboot without hanging?

avantwireless

Already in there...

avantwireless

On a Intel D525MWV mini-itx motherboard with 5.x or 4.17 ( just haven't tested more ) when you ask for a reboot the system hangs after announcing "rebooting" Anyone have any ideas about this? I'm hunting around for my serial cable to see what is on the console

Thanks!

avantwireless

Yes, we have had to roll back to 5.2 on our monitored sites.. They were supposed to be fixing one thing... Oh well, that's why they are Mikrotik...

avantwireless

Well once again snmp queries of voltage are broken on RB433AH...

SNMP Error:
Received SNMP response with error code
error status: noSuchName
index 0
SNMPv1_Session (remote host: "10.0.217.217" [10.0.217.217].161)

avantwireless

We are trying to get BGP to our providers Cisco's working with tcp-md5-key and are failing. We can only get the connection with authentication disabled. Is there something that we are not doing right? Are we supposed to convert the ascii key through a md5 hash before putting it in the key field? So ...

avantwireless

shouldn't you also use "stable" browser not 5 year old browser with hundreds of bugs? ;) try Firefox 4, Chome 11, Safari 3, Opera 11 or any other browser from this century. Well, we use what is "released" with the OS... So far Fedora is not putting out Firefox 4... and Chrome 11...

avantwireless

LOL, fixed bandwidth test in webfig.... Yep, now can't get into webfig at all.... Good fix... :lol: which model of router? what happens exactly? any errors? send screenshot to mikrotik support please Happens on RB433 and a 450G... Just sits there with the busy bars never gets to the login prompt...

avantwireless

LOL, fixed bandwidth test in webfig.... Yep, now can't get into webfig at all.... Good fix...

avantwireless

Still not ready for prime time... 10mhz channels std 2.4ghz with 802.11g/b ubiquiti clients signals in the mid -50's 8 clients.. throughput is non-existant with clients attached. Back to 4.17 everything back to normal. Tried every setting I could think of. Using one of the KXS30SG cards as AP.. con...

avantwireless

Still not ready for prime time... 10mhz channels std 2.4ghz with 802.11g/b ubiquiti clients signals in the mid -50's 8 clients.. throughput is non-existant with clients attached. Back to 4.17 everything back to normal. Tried every setting I could think of. Using one of the KXS30SG cards as AP..

avantwireless

Is there an existing fix for snmp gets not working? SNMP Error: Received SNMP response with error code error status: noSuchName index 0 SNMPv1_Session (remote host: "10.0.180.180" [10.0.180.180].161) community: "MT-Avant" request ID: 391607887 PDU bufsize: 8000 bytes timeout: 2s ...

avantwireless

Wilco... it was set for g only...

avantwireless

We tested on a simple 10mhz wide link with 2.4 radios sr2 and KXS30SG radios and they would only connect in B no matter what was set. quickly went back to 5b5 all better...

avantwireless

Sorry to hijack the thread, but the comment on compatability is right. Mikrotik working with Ubiquiti is so much stronger than proprietary protocols. The battle isn't between Mikrotik and UBNT but between wireless and AT&T or comcast or whatever else competes with wireless. Standards create mark...

avantwireless

we are seeing on about a 24 hour basis

avantwireless

snmp voltage still broken...

avantwireless

Because these kinds of problems don't show up on a bench without real working conditions..

avantwireless

5b3 has been a disaster for us. Upgraded x86 system and it started to flap it's backhaul, then crash. Upgraded the AP (RB333) and that started to flap it's backhaul and then crash when trying to winbox into it. Downgraded everything back to 5b2 and all is sane again. It looked like it was related to...

avantwireless

N connection that was running nice at 20mb/s tcp is now not doing so well. Also a snmp voltage query is now failing on 411AH...

avantwireless

If you use NetInstall again, the license should be OK.

Huh??? This doesn't have anything to do with license anymore... Licenses are just fine...

avantwireless

How did you install v5 beta 1/2 ? Exactly how?

Both though NetInstall and through the web upgrade page. Makes no difference. Exactly the same way as was installed with a 128Mbyte Compact Flash that worked. I tried it seven ways from sunday and it's repeatable as ....

avantwireless

This is the same problem with WRAP and other x86 that was there for 5b1. We have isolated it to the boot media... 01F0 Master 848A SanDisk SDCFB-64 SanDisk 64Mb boot devices will not boot. It has nothing to do with the WRAP board. Because of this we will lose about 10 licenses, if it's not corrected...

avantwireless

went from 3.30->4.9 (as a check of upgrade only ) -> 5.b2 -> 4.6 There were no numbers on the km output in winbox or sshing in ... figured that was an output error...

avantwireless

We saw horrible performance on 5beta2 for 802.11a links. Links that were working at 10-11mb/s tcp went down to 5-6mb/s. Wow what an improvement...

Sorry not...

avantwireless

Webfig

avantwireless

It solves most of the problems with platform support that winbox has and is a great feature, Thanks!

avantwireless

with slash... page just refreshes with no content being displayed... firefox on fedora...

BTW the bootloader on some wrap boards is still broken. Not all wrap boards just some. Still trying to quantify the differences between one and another that determines which are broken..

avantwireless

On 5beta2 on x86 platform... endless refresh with no content displaying on latest firefox...

avantwireless

It happens with upgrades to. There must be a problem in the bootloader...

avantwireless

We tried downloading it from 6 of the mirrors. From 5 different systems... 1 XP 1 Vista 1 Win7 and 2 linux systems... All different networks... hmm yeah must have been a proxy cache.... right...

avantwireless

4.6 Netinstall is now fixed! YAHOO!

avantwireless

Normis, How many systems did you test with. We sucessfully upgraded 4 systems and had 2 fail. That's why you see some who have no problem. It seems to be on a board by board basis. I sent in a supout.rif from 4.6 of a board that failed. Let me know if that helps. This is a thorny problem... ALSO ple...

avantwireless

Note my message about WRAP boards. There is a bug in the 5beta1 boot for these archs... But it's not your fault or a license issue. Tried 5 ways from sunday to get it to boot but it will not. Somewhere there is a bad piece of code...

Robert

avantwireless

We were lucky with the first wrap and it sucessfully loaded and booted 5beta1. The second and third wrap 2c and 1d both with 64M roms both hung at the initrd load. The fourth was successful. OK so I shouldn't have progressed after the first failure... Anyways because the zip of netboot 4.6 is hosed ...

avantwireless

RouterOS 4.1 !!

Changelog mentions nothing about N

avantwireless

I don't see how anything has changed? In v3 you didn't have 802.11n, all you had is 802.11abg with Nstreme. You still have the same in v4, only you have turbo-less 802.11n in addition to that.

N without Nstream to defeat interference is slower that a/g.... Not much of a product...

avantwireless

Does seem very odd. I'm trying to understand why 4.0 would be released without the crown jewel (Nstream) working properly in N.

I can only guess there is addtional new hardware coming that needs 4.0 and MT didn't want to release on RC firmware...

George

I'll bet you are correct...

avantwireless

4.0 is out!! Did you fix nstreme on 802.11n? Did you make any change on 802.11n at all? You should run Nstreme with 802.11abg protocols, with 802.11n currently it's not recommended to use Nstreme. We are working on an entirely new Nstreme version, but it's not implemented in v4, because it's not ma...

avantwireless

When setting the source address in MT 3.28 and 4beta4 it seems that it no longer works. Tested on le and be and 333 and all pings were coming from the interface address instead of from the address set in the ping tool. Anyone else seeing this? Is it already reported to MT?

Thanks!

avantwireless

Hello, just to share my experiences of 802.11n MT flavour:

1/ loads of WPA2 errors often means it just wont associate even with good signals without rebooting remote units

It's sound interesting..

Why not go to aes, as it's built into the card?

avantwireless

Most resellers will not warranty repair your items... So if you want to see it so bad, why can't he send it to you?

avantwireless

In v3.25 We found this problem the day it was released. After trial and error we found that if you write a change to your bridge (ports - add or delete) and reboot it - it will NOT loose any more configs. Took us awhile to solve problem and we reported ASAP to Normis via the forum. In v3.26 I would...

avantwireless

We are sitting here absolutely afraid to touch anything at this point. Cannot move the biz forward or anything. One group we work with tried to go from 25 to 26 and spent 4 hours recovering the board. We lost a major backhaul last night trying to upgrade 25 to 26. When we got the system on the bench...

avantwireless

Would someone please fix the web interface for x86 in the next release? Mine lets me type user/password (and if I get them wrong, it tells me), but if I get them right, I get a 'failed to connect' error. That would be the problem. & we like to use the web interface to upgrade. I guess that will...

avantwireless

Would someone please fix the web interface for x86 in the next release? #$^&*!!!!!

avantwireless

Thanks for all the tips on getting these working better. We've followed many of them, here are the ones that seem to have helped us so far: - No WDS - Short preamble - No Periodic calibration - Nstreme on, but CSMA not disabled - Nstreme best fit - Play with power levels until we get best results. ...

avantwireless

Thanks Omega. Bizarre that one would have to upgrade the license even though it showed Level 4 as the license. The only noticable change was that the R52N is now being recognized. Thanks again. Ummmm maybe you are confusing Level 4 with Version 4? Levels are the set of features that are available i...

avantwireless

[quote="NetTraptor"]Ahha gotcha... Periodic recalibration is Broke. Disable it to stop your links disconnecting. Here in Athens we got our Feeders production line started and already have 2 links in production and 1 in testing (3, 6 and 10+ Km). We are full on for changing most of our Back...

avantwireless

We have the first and last boxes checked out of three choices...

Same setup in lab ran 100mb/s udp and 55mb/s tcp all tests are done through the radios to pc's on both sides.

avantwireless

near as I can tell the web interface for x86 is now broken, when accessed from firefox/linux at least... Great, just Great...

avantwireless

Well, so far I haven't seen _any_ results for real world outside connections longer than a mile (1600M) so I'll throw out our first results. Maybe I'll get a license. ( not likely ). This is a test with sr71a on both sides 2x2 mimo w/ 24db 5.8 ghz panels and Rb433 on one side and RB433AH on the AP s...

avantwireless

It would be so great if MT GAVE UP on making radios. They just don't get it. This is taking their BRAND down. Ask Proctor-Gamble, brand is everything and if you take the radio issues away MT has an absolute killer brand. With the radios, they come off as half-... And now to delay getting N working s...

avantwireless

So what are the special NAT fixups? We must use NAT across most of our customers....

One to one NAT does not save IP address space.

avantwireless

The subject been brought up before, but I thought I would try and bring it back with the MT eng team again. With NAT UDP sessions for VOIP and probably other stuff is broken. Even doing a bandwidth test sending to a MT router UDP data seems to be broken. Is there going to be a fix for this or are we...

avantwireless

Upgraded to 3.16 on a 333 and snmp voltaging is now broken. Downgraded it and it works again.

avantwireless

Sorry, I should have posted that I have tried with the sip helper off and on. No difference...

avantwireless

There is one Wan interface and one lan interface. Fairly simple. The VOIP provider is SipTalk http://www.siptalk.com, works fine on the cisco, doesn't work on Mikrotik. Can turn the NAT on the Mikrotik off and on and voice and dialtone come and go. Note that Vonage works. I have been trying to get t...

avantwireless

Hey, anyone can help on this it would be very appreciated.... I tried moving my internal networks to Mikrotik NAT from Cisco NAT. Everything seemed ok. But I just found out that VOIP is now completely broken. Customers VOIP boxes, Grandstream, Linksys, etc. cat get on the VOIP server for setup, can ...

avantwireless

I saw the problem with a 13.5V input.... I don't think it is cured going to 24V supply. I think mine was cured by the latest firmware for the board.

avantwireless

We were on 12V deep cycle lead acid batteries with a charger, running at 13.4 volts. This was plotted for all the time it was up and rarely varied 0.1 Volt. We have been running it on the bench with 3.10 and 2.15 firmware. We will probably test it back in the field next week.

avantwireless

I have a 333 that is locking up and has this message in the log file. Anybody can tell me what it means?

Thank you.

avantwireless

Will src-nat go to an address pool instead of a specific address? Say 24.205.129-132?

avantwireless

I've searched to forum and other people have asked this question, but so far there doesn't look like there is an answer. Is there a way to specify the outside address of a Masqerade? This would be like the way that cisco does it. After that question, is there a way to have a masqerade pull from a po...

avantwireless

& as an example of what george was saying... Normis says in the entry above the "product to be released shortly" for the ability to look at voltage again. Ok so how about letting us know the projected specs on that product to see if it's going to fill the bill. Was there a problem with...

avantwireless

jwcn, Saying someone doesn't know what they are doing instead of looking at a possible problem shows YOUR ignorance.... You come across as a real know-it-all who has everything perfect. May your karma bite you in the a... Now for our experience in the R52h debacle... We have a stack of 10 r52h's tha...

avantwireless

Normis,
Again I ask does the 433 have the voltage available like the 333?

Thank you

avantwireless

Does Anyone know if the 433 will monitor it's voltage like the rb333? This saves us hundreds of dollars on off grid installations...

avantwireless

Yeah, why would you do this? $118? A little more than 411+r52H at discount, less capability, ( and hate u.fl ).. And if a radio goes, you have to replace the whole thing.. We've seen a decent percentage of R52H's go bad or be bad that we use Ubiquiti for any critical locations... This will be fine f...

avantwireless

Definitely reproduceable... rc8 for 133 boards is no good on the POE interface. Huge quantities of lost packets when flood pinging that isn't there at rc7. Downgrading to rc7 fixes all. A huge step backwards.

avantwireless

I'm going to post this at the top level too, but I wanted to respond to the prior comment. I just moved two SR5's from a 532 to a 333 yesterday, hoping to pick up another slot on the same mountain. Same configuration all around. Signal levels on the clients we in the range of -64 to -81 across 25 cl...

avantwireless

As far as I can tell, it's a little better. I have upgraded all 3.0beta6 to rc4 and the only problem is that I have one compex card that will now not talk 2.4-10 or 5 mhz channels... This is pretty weird... worked fine with beta6. And it's the only one that I was trying to do 10 or 5 mhz channels wi...

avantwireless

YES YES YES! It finally passes full speed traffic! Limiting out to 14.7mb/s udp ap->cpe with 133c and r52H. Not as fast as sometimes in the past but not crashing to zero either, This works! tcp was around 10.5mb/s all measured using mt bandwidth test and testing through the AP/CPE not to them.... TH...

avantwireless

Sending from 2.9.43-> 3.xrcx Always see loss of throughput at udp sending to 3.x above 14.6mb/s and any tcp speed above 2.4mb/s
Sending from 3.x.x to 2.9.x is very fast....

Robert

avantwireless

I removed routing and advanced-tools. That does keep the box more responsive. BUT the AP->CPE throughput still is trashed. Anytime the AP transmits more than 10mb/s the cpe throughput falls to nothing. That's UDP, and TCP there isn't more than 3mb/s down from the ap. This is trivially reproduceable....

avantwireless

Sorry forgot the package list:

Wireless
Security
Routerboard
System
Avancedtools
Routing

and sometimes NTP BTW I had to remove NTP as telling the system to disable it seemed to be ignored...

Robert

avantwireless

It gets so slow and 100% cpu that it's unusable. I could run without the ntp package, but even without that, it will not transfer data continuously above 10mb/s without dropping down to 1-2mb/s and testing to 2-3mb/s to outside testing locations i.e. nitro.ucsc.edu... Something is really wrong with ...

avantwireless

Seems so not ready for prime time... Again there are huge timeouts lack of ability to log in with winbox and on and on. If this continues to the actual 3.0, then it won't be our CPE platform.... Still drops out when 5.8 bandwidth test goes over about 8mb/s from the ap. This was the same problem that...

avantwireless

We got B9 to work on 133c boards with atheros based card, but the AP->CPE/Beta9/133c throughput is no good. The throughput grows and grows then crashes and sometimes the board reboots. Looks like it might be a buffer overrun? Funny thing is I have seen a Ubiquiti LS5 exhibit the same behavior. Beta6...

avantwireless

6 runs ok using pseudobridging. 7 seems to go away and can no longer log in. Also seems to reboot frequently. Have to do a hard reset to defaults to get back in touch with it then need to immediately set it back to 6 to use. Feels like a memory leak...

/robert

avantwireless

Is this workaround available? I'm using the 2.2.10 winbox.exe with MT 2.9.38 and it's freezing under wine 0.9.24 and 0.9.27... Would really like to be able to get back to a useable winbox under wine.. ssh interface is sometimes slow to traverse... Robert As Normis already said: in upcoming RouterOS...

avantwireless

winbox itself is just a loader, all the files are inside routeros. edit: it's not `messing it up`, it's a wine bug. we just made a workaround. Is this workaround available? I'm using the 2.2.10 winbox.exe with MT 2.9.38 and it's freezing under wine 0.9.24 and 0.9.27... Would really like to be able ...

avantwireless

Unfortunately snmpwalk does not seem to be working to this device, I do have the full mibs from the vendor, though...

robert

avantwireless

How do you get a new Mib ( this is for a UPS ) into Dude?

thanks

rra

avantwireless

Well, this version completely dies under wine 0.9.8 under fedora4. So I guess that solves the problem of fonts not displaying for any icons in the maps.

Robert

avantwireless

One little secret about rflinx amps ( and all without exterior boxes). Make sure the components of the amp are facing away from your AP circuit boards. Have the metal heat sink between the two devices. Muchly reduces crosstalk across components...

Robert

avantwireless

Do you guys have "allow-shared-key" set to yes?

avantwireless

Ok, so now we are running the latest 19 release. Tried changing fonts etc. Running Fedora 4 on all machines, latest wine, etc... No joy on text on anything with the client running under wine. With dudes.exe under wine and the client under windowsXP all is ok. Anyone with any ideas?

thanks!

avantwireless

I tried it without and then with moving windows fonts into .wine/drive_c/windows/fonts. Fonts look normal, and I chose a font for the appearance out of the font chooser just in case. I am getting icons for the device in the box, but most importantly not getting text for the bandwidths on the links.....

avantwireless

Ok, so now I am running 0.9.5 latest compiled code and now I can make links. BUT when looking at the maps from Dude run under wine on a Fedora 4 installation the boxes are all small and have no text in them. This is using remote to attach to the server, local attach fails. IF I look at the server fr...

avantwireless

I am running a just installed 9.2 so I'll upgrade and try again...

thanks!

avantwireless

Will there be more work on Dude so that it's not completely crippled under Wine? Devices don't have names, there is no way to add links and so on and so on... Please some work on it under wine?

thank you...

avantwireless

If you enable compression the MT as a client will no longer talk to the MT AP. Association but no data across the link...

Somebody needs to kill this bug at MT...

Robert

avantwireless

What are the chances that the next release of MT will correctly support Compression on the SR/atheros radios?

Search found 137 matches