... make you wonder - what kind of reference OS/system Atheros uses?
AtherOS + Atherboard
Just change the address to .2/32 and network/brdcast to .3 manually.address=10.10.10.2/31 network=10.10.10.2 broadcast=10.10.10.3 interface=ether3 actual-interface=ether3
Seems correct to me.
Valentines day?Look for the announcement in February at MUM.
I did not run up to 100meters. What I have is around 50meters of cat6.
Yhis time around, ... i used 250meters of Cat6
Vpol only!http://www.mars-antennas.com/item/g_ant ... _1-43.html
Awesome mount-kit for an easy installation.. and 22dbi antenna...
Don't forget the specs states a +/-2db, the power also varies across the band.
I like the fact there is almost no power loss @36Mbps...
LDF5-50A is TOO near the cut off frequency @ 5GHz!If you are going with long runs and low signal levels, LMR 600 or better and LDF5-50A are good choices.
Thanks George, could you share some more here:Not yet, but we do have "CSMA disable" selected. There is some Canopy in this RF environment...
Did you try with peer's IP address?For IPSec, you may specify 'ip ipsec peer' with address as 0.0.0.0 (if address is dynamic or you do not have information about it, secret (pre-shared-key) and use 'generate-policy=yes. It should work.
Yep! and you can do so for free with RouterOS within a limited time.I have a R52 MiniPCI radio card, instead buying a routerboard, which Router Board 11 IA should I buy to use the radio mudule in my PC?
what is the meaning for "about" i'm sure you know how many cpe you have,Hi,
we have about 60-70 clients