MikroTik

samir494

mikrotik not support mobile number registration and send password to same number for login,

samir494

here is the sample of working code /tool sms set receive-enabled=yes :local smsPhone :local smsMessage delay 2; :foreach i in=[/tool sms inbox find] do={ #Password generation :local date [/system clock get time] :local hour [:pick $date 0 2] :local min [:pick $date 3 5] :local sec [:pick $date 6 8] ...

samir494

CCR1072-8S+ support third party access point to configure?
i mean othern then ros hardware

samir494

use scripts to popup your information to display on user account, it should be a data related, account related also

samir494

Created the login page to be a little bit dynamic and responsive.

can you please share your zip file to me on Samir.support@gmail.com

samir494

contact me

samir494

can you share your config of 192.168.10.1 and 10.1.1.X devices ?

samir494

sure , let me know if you need more from me

samir494

can you have team viewer on your pc(laptop)

let me know i will check your prolem & try to solved

samir494

got it

http://<router's address>/cfg/login

samir494

all,

it is possible to configure device with webfig ( 5.X and above)

earlier i read in forum that there was also possible to configure via browser in version 4.x and lower too

thanks in advance

samir494

can you share your network connectivity ?

samir494

hehehehehhe,

go to your router IP then user

ex.
WAN ip = 192.168.88.1 (ether1)
LAN ip = 192.168.1.1 ( hotspot IP / ether2)

now try with http://192.168.88.1/user , from hotspot user who already login

ref. http://forum.mikrotik.com/viewtopic.php?t=69721#p355034

samir494

yes ,

samir494

dear, you can add ip of website or website address in wallgarden to allow user to surf those sites without login, you can also allow local ip address like printer / server to access user who using your hotspot users are redirected to llogin page if user try to surf other site not mentioned in wallga...

samir494

use google you will find lots of software for billing ,
some are like DMAsoft, Antamedia ( best I am using it since one year), ful returns of your money

samir494

r u going to use paid hotspot radius and billing software ?

lots of are available in market ? from where you want buy ?

samir494

i m using hotspot & radius, but not facing such issue yet

samir494

thanks got it dear

samir494

hi all,

i have 12 nos of RB493G with one wireless card
i want to set all as wireless mesh network,
so even any one rb goes down user still access the connectivty

Gig ports are used for cat5 connectio to user

thanks in advance ,

any one can have such network setup let me guide

samir494

recharge your account

samir494

here user can use prepaid voucher number after login

account status for users .. showing , time/quota/limit

guest / prepaid user can logged in via ticket number

samir494

dear,
it is showing JPG file when downloaded,

please share zip file , i also mailed to you

samir494

Hey!
I am About to Update this my Old page

hi,
can you please share .zip file of the same

samir494

MT itself have Userman
you can download it from mt site & install
configur as you want , it also support paypal for online support
more you can get support form mt support to add your own payment option if any

samir494

can you see console port there ?
yes, used it

samir494

thanks,

i send code for ref. ,,
actual interface & type is depend on user to set as his require

samir494

Use this command to configure LEDs for signal strength:
Code: Select all
system led add disabled=no interface=wlan1 leds=led1,led2,led3,led4,led5 type=wireless-signal-strength modem-signal-treshold=-51

samir494

hi,

did you check what is it ? whats the configuration of that system?

or you can share a teamviewer so i can found out the error & resolved it

samir494

dear, AH or AD mean ACTIVE HOST or ACTIVE DYNAMIC = which is logged in through Username & password H mean HOST = which is connected to hotspot but not loggedd in yet D mean DYNAMIC = eighter before geeting IP from you hotspot user already assigned ip to his LAN connection or STATIC IP always con...

samir494

unless it shows AD you can say its not logged in, user cannot access your service

samir494

use MT userman for this,
you can redirect user to paypal

samir494

dear,

AH mean ACTIVE HOST = which logged in through Username & password
H mean HOST = which is connected to hotspot but not loggedd in yet
D mean DYNAMIC = eighter before geeting IP from you hotspot user already assigned ip to his LAN connection or STATIC IP

samir494

try this

/ip hotspot profile
set [ find default=yes ] dns-name=127.0.0.1 hotspot-address=10.0.0.138

samir494

time left = $(session-time-left) Balance Byte = $(remain-bytes-out) / $(remain-bytes-in) or you can use as below idle-timeout - idle timeout ("20m" or "" if none) idle-timeout-secs - idle timeout in seconds ("88" or "0" if there is such timeout) limit-bytes-in...

samir494

/queue simple #name=”Limit 6GB” target-addresses=192.168.1.0/24 dst-address=0.0.0.0/0 interface=<ether-x> parent=none direction=both max-limit=1M/1M total-queue=default-small #name=”After 6GB” target-addresses=192.168.1.0/24 dst-address=0.0.0.0/0 interface=<ether-x> parent=none direction=both max-li...

samir494

if your are using MT userman,

its very easy & quicky too

samir494

here you can check, this is i used for free user 1. set this on login script :local freeuser :set freeuser "$user" :local freeuserno [/ip hotspot active find where user=$freeuser]; :local freemac [/ip hotspot active get $freeuserno mac-address]; :local freeip [/ip hotspot active get $freeu...

samir494

If you create users by script running on the router, where do you get their email addresses from ?
I would use a php script for generating users, and sending them login/pass.

hi,
can you share your php let me check i think it useful to me

samir494

The easy way

Allow signup in user-manager, and create new users via signup page

i do it using script , not in userman

samir494

share a snap of config & error

samir494

hi, thanks its very helpfull in my case i need one more help from you, i want to send mail to user only once when i create his userid in hotspot like, Dear <User_Name> Your Account is created and Login Details are here as below Your LogID= < Userid> and Paasword =<password>. how can i do with script ?

samir494

hi,
i am trying to use SSL request for Hotspot user for logging
i import certi & it displaying too in certificate menu

but i am not able to find IP--> services-->> hotspot-ssl

how to enable that , i am using 5.18

samir494

hi normis, thanks for trying anotherway to include that, in ether-->status mentioning last three like 1. ether port change to UP date & time stamp 2. ether port change to Down date & time stamp 3. ether port change to UP date & time stamp honzam you can also try to run script for the sam...

samir494

you just need to open new terminal in winbox & type " log pr" it will show you log informations

samir494

6.2 is still need to LAB test ?

or released today ?

samir494

in files, is hotspot directory available ?

samir494

how can retrive hotspot user's websurffing activity log ?

like

1. which sites user surf ?
2. how much time spent on that that site ?
3. top 10 users by data transfer

samir494

We always "plan for improvements"

MT is always take care for Improvements--

that Improvements needs Improvements

samir494

you can add that like : 5100-5400
or you can add by drop down button

you can also add only require frequency in scan list by the commnad

int wire set wlan1 scan-list=default,fre1,fr2,fre3

its works fine in 6.X also

samir494

thanks dear

samir494

where can i find routeros 6.2 changelog

samir494

here it is ,,

samir494

check logs there is time stamp when ether port status change

samir494

you need to add this code in scripts

samir494

is mt going to do more in this ?

it useless log ,, on one can find out previous activity and what was changed?

i mean , wireless band changed ? frequency ?

thanks is advance

samir494

hi,

in Log i can see
system,info device changed by admin

how can i found out what was changed ?

samir494

Please make one supout.rif right after restart, and one right before restart. Send both to support@mikrotik.com

Make sure you have latest build: http://www.mikrotik.com/download/share/ ... le-6.1.npk

please shar chanlog of the same ,

samir494

please make serial cable as mention here

samir494

http://wiki.mikrotik.com/wiki/Manual:Netinstall

samir494

hi,

it suggested to use netinstall for uploading 5.20 or any other OS instead of preloaded

samir494

ok sure ,, when is it possible for you

samir494

each router model has different version. old models don't get new firmware

hi dear, can you please check http://forum.mikrotik.com/viewtopic.php?f=1&t=70883

please check Possiblities of the same

samir494

Thanks Dear,

Files are listed on that are not Latest,

please share Newest one

samir494

hi all,

where can i get FWF ( bootloader files ) for

1. MIPSLE ( RB133 / RB532 )
2. PPC ( RB333/ RB600)

i had downloaded new FWF from site for RB433 / RB411 / RB450

i cannot find FWF files for product archived or so on site

Thanks in Advance

samir494

its better to use SMS service for the Username & Password

User can create there registration account on hotspot by enabling user create page in usermanager ( mikrotik)

samir494

MIKROTIK ITSELF SUPPORT RADIUS

share your config of hotspot, Radius & userman

samir494

Dear,

EOIP & Bridge are Differenet

i suggest you to use Bridge configuration for your Connectivity

encryption will take care by your SIP server , there is nothing to worry

samir494

hi gotsprings,

if you want to connect both office, i suggest to use Bridge Instead VPN
Did you mean EOIP?

Shouldn't that be encrypted with a VPN?

dear post start with VPN

by the way thanks for clarify that you use EOIP

good... carry on

samir494

hi gotsprings,

if you want to connect both office, i suggest to use Bridge Instead VPN

samir494

the users in usermanager & in hotspot are different

if you create user AAA in usermanager & radius is not configured it will not work

if you configured radius on hotspot , you must create user in usermanager not in hotspot user

samir494

hi

did you check this one ?

http://wiki.mikrotik.com/wiki/Centraliz ... tspot_user

samir494

can you start team viwer or Chat soon

what is login & password for RB ( 80.101.110.68 )

samir494

click & drag the rule to place where you wan it

samir494

i m ready to help you in this case

samir494

as snap what is your WNA IP ? g1 or EL1 i.e. i consider g1 is your WAN connectivty

now change your route according

0.0.0.0/0 to gateway=<Your WAN IP>g1

now go to ip firewall add nat <LAN IP> action=masquerade

then check

samir494

yup

WAN IP

samir494

share your snaps for future config

thanks

samir494

if you are using ros 5.x

then it bit changed,, you may need to remove "% "or "_" sign or manipulate it

this is for 3.x

samir494

yes

you can use any of these

samir494

dear, The following constants of voucher template will be replaced with actual user attribute values: %u_username% - Username (login); %u_password% - Password; %u_owner% - User Manager customer; %u_firstName% - First name; %u_lastName% - Last name; %u_phone% - Phone number; %u_location% - Location; ...

samir494

what ap you used ?

waht is ap wireless confiuration?

samir494

snap is attached for ref.

samir494

hi atwilley

you had assign LAN IP only interface ( g1)

where is WAN IP ?

attache snap of interfaces also

samir494

hi,

you can add vlan tag on mikrotik wireless interface

samir494

hi check this one you need to check filed Character constants from http://wiki.mikrotik.com/wiki/User_Manager/Character_constants :foreach a in [/ip hotspot active find] do={ :if ([/ip hotspot active get $a %u_actualProfileLeft%]<3d ) do={ /tool e-mail send to=xxx@xxx.de subject=("'" . [/i...

samir494

hi.

so your getting the video from youtube ?

if yes then you need to add youtube website in wallgarden to bypass

try this also

samir494

hi,

post your snap of

IP address & route

samir494

good news dear,

its a time to disco for mikrotik

samir494

hi share me your chat id or ip address of router on which you need to configure PPtp Server

samir494

hi,

try this one

http://wiki.mikrotik.com/wiki/Manual:Interface/PPTP

samir494

bydefault apple uses safari for browsing, try with downloading google chrome in apple,

also try with turning off popup block in safari
1. Open Safari if it is not already open.
2. Choose Safari > Preferences, and then click Security.
3. Turn off “Block pop-up windows.”

samir494

you can also try to bypass that video by adding the same in wallgarden

samir494

if it only case of apple,

try to bypass apple.com in wall garden and then check,

samir494

hi dear,

let me make it simple,

there are four radios ( 1. AP ------- 2. Repeater----------3. Client )

let me know how many wireless card i purchased for this?

samir494

as your wiki Repeater configuration export: / interface wireless set wlan1 disabled=no mode=ap-bridge band=5ghz frequency=5180 ssid=Main_gw wds-mode=static / interface wireless wds add disabled=no wds-address=XX:XX:XX:XX:XX:X1 master-interface=wlan1 / interface bridge add / interface bridge port add...

samir494

hi cbrown, in short you are trying to say that if ther is a repeater i must have two wireless card, indirectory that is adding more cost to my project ( one wireless acrd & antenna) so, no of repeater add nos of wireless cards too, in other case ( which i suggest ) is just adding antenna lets ta...

samir494

hi, try this one, its working for me [admin@MikroTik] > tool user-manager user print where username=222 Flags: X - disabled, A - active, I - incomplete 2 customer=admin name="222" actual-profile="256k" password="222" shared-users=1 wireless-psk="" wireless-enc...

samir494

dear

try this one, itsomewhat you need

ip hotspot user print value-list

samir494

connect it to serial cable and check what error i display on pc screen

samir494

hi cbrown,

its similar to your post,

thanks for post,

actually in mikrotik two wireless card used for repeater modem, if i m not worng,

where i suggest one wireless card for repeater modem ,

thanks,

if it resolved in mikrotik , life becomes zingalala,,,,,

samir494

hi, does it possible to use single wireless card for repeator modem ? for example ,, kindly visit for product call VIP 110-24 ( now its VIP 110-58 ) & topology http://eionwireless.com/technology/vine it uses one wireless card & you can configure as Base / Repe / Client only the addition is o...

samir494

hi, does it possible to use single wireless card for example ,, kindly visit for product call VIP 110-24 ( now its VIP 110-58 ) & topology http://eionwireless.com/technology/vine it uses one wireless card & you can configure as Base / Repe / Client only the addition is one extra antenna for ...

samir494

hi,

i wnat to allow mutiple vlans on CE modem,
without adding bridge in interface and in bridge port aslo

its possible if i add bridge in interface and in bridge port i add vlan & ether

here i hope to configure the same without bridge ( client modem as routing mode)

samir494

all,
l want to pass multiple vlans on wlan interface without adding bridge in Client RB411

if i add one vlan in same case it will work perfectly,
the case is adding second or more vlan in client modem ( RB411)

thanks in advance

samir494

in files is there hotspot folder available ?

check

attached your config snap if possible

samir494

plz suggest me

i am internet service provider what board and what card i use for beeter conectivity 2.4 ghzand 5.8 ghz

plz suggest me

call on my cell number

its not just a way to explain as you said to setup ISP network

samir494

try this once routing bgp set enabled=yes router-id=xx.xx.131.1 as=100 routing bgp instance set default as=100 redistribute-static=yes redistribute-connected=yes routing bgp network add network=xx.xx.130.0/24 routing bgp network add network=xx.xx.131.0/24 routing bgp network add network=xx.xx.162.0/...

samir494

you can manually create thos files or you can download it from other running Baord

samir494

thumbs up buddy,

can is it possible to use with mikrotik usermangar ?

samir494

dear

http://wiki.mikrotik.com/wiki/Centraliz ... tspot_user
i think above link will help you

samir494

did you get any update on your problem?

-sid

not yet, i still using proxy for same

samir494

WDS Topologi.jpg configure AP1 as add bridge in tnterface as bridge1 wireless mode=AP/Bridge with Wds-mode= dynamic & Wds-default-bridge=Bridge1 ip add on ether /wlan add ether in bridge port with bridge1 & also wlan in bridge port snap is attached you can repeate the same configuration in ...

samir494

it is only possible if you open site on the same page / running page / refresh that page to counter this i used logout page ( status ) where log off button available, i used that to log out & closed the broswer so when ever user open new broswer page it will ask for login :lol: its work for me.....

samir494

make sure that the user created in usermangaer not in hotspot

samir494

there are multiple ways to recover password,

e.g Scripts, Forgot passwprd page and more,

instead of this just talk to counter of hotspot & get the password on your identity verify in detaisl provided for login

samir494

once you make ipbinding user is free to use your service without paying anything

samir494

http://yourrouterip/user

it will ask for user is & password

login & change password

samir494

user?

hotspot user ? winbox login user ?

in both case user can change their password

samir494

dar you check hardware list which supported by mikrotik

http://wiki.mikrotik.com/wiki/Supported ... FP_modules

samir494

in this case your only create a user with online payment option,

so, to use hotspot service & more , it is must to login with ID & password,

else you can bind that user' IP / MAC / for use hotspot without login ,

you need to do it once ony, in hotspot IPbinding

samir494

hi,

any have used it or any solution to use IP based SMS server to send sms from Roaterboard

samir494

if you are using Firefox or chrome, its bit delayed in refresh the value

in Microsoft explorer you will get the same once refreshed page manually
let know if not resolved

samir494

all

as user manager supports only two payment gateways by default,

how can i add new payment gateway for india in user manager ?

or any other way to redirect payment mode to local payment site?

samir494

dear,

did you check signup option in usermanager ?

samir494

yup,

it is always better to use different frequency band

samir494

tulip telecom.com

samir494

did you check the same after rebooting of router ?

samir494

dear,

its better to use 5.X not rc

samir494

dear, here we are talking about mikrotik hotspot, not for aps, if you want to make a soccer stadium into hotspot, you need aps with 802.11N X nos of ap for coverage, all these aps are connected to one hotspot X86 server afterall, it my luck to runnign such huge clients on mikrotik 3.20 thumbs up to ...

samir494

There are printers with network card/print server included. We've those.

any one checked e-print option ?

samir494

dear,

32k is running on network since last seven months,

samir494

bet to you use in x86

nics are, you can use cable or SFP

1. intel
2. Realtek
3. Broadcomm

samir494

thankx

samir494

hi jo2jo,

try telnet from radio itself with IP instead of mac-telnet

is possible , reboot that radio by switch it off & on

samir494

most of the NIC supported by Mikrotik

samir494

from where i can download rc8?
let me check bit more oprtions too

samir494

it good for 50k,
beyond that you depend on the LAN card supported in motherboard or in PC

samir494

yup,

you can use any access point radio ( 300mbps ) for more clients to connect

samir494

check sysytem --> package

if hotspot is showing there , you dont need anything else,
if not there download form mikrotik site hotspot for 5.22 and install

samir494

samir494,

2x Intel® Xeon® processor E5-2400, 6 Core (24v CPUs)

32 GB Ram

6x 1Gb NICs

2x 1Tb (Raid 1)

Regards

Lee

dear,

its more than actual require
you surely go with this ,, enjoy the days

samir494

it sound good,

chaneel-bandwidth is waht ?

use 20/40mhz-ht you will get more data through put

samir494

let me know the location of the same

samir494

forgot the world said on best signal

keep in imind that what ever gives you more data transfer rate is best for you
even though CCQ is just below of 20 or equal to 100

samir494

whats your approx hardware currently running ?
i will suggest you accordingly

samir494

yup,

use two wireless casrd as you need for backhaul & clients

dont forgot to give me karma

samir494

i am facing problem with user activation timestamp in usermanger

in routerboard it shows me correction according to selected GMT time zone,

but in usrmanger its different time

what to do to resolved this ?

samir494

usermanager customers login panel: http://[my-hotspot-ip]/userman usermanager normal users login panel: http://[my-router-ip]/user I still can't access it. My hotspot network ip is 192.168.1.1, I have tried to change the ip of the radius and the usermanager ip, using the same ip like 192.168.10.1 (...

samir494

is there any way to access https site with http-proxy enabled ?

samir494

go to system package,

select userman to uninstall now reboot

samir494

thanks dear,

when i disable http-proxy in Mikrotik & use proxy-seeting in laptop i can access https sites also,

when i enable http-proxy in Mikrotik & disable proxy-seeting in laptop i can only access http sites ,, no https

kindly help me bit more

samir494

Configure HotSpot parent proxy at
Code: Select all
 /ip hotspot profile http-proxy=

Thanks Sergejs

it works afterall
now i am able to surf normal sites but not HTTPS site like GMAIL.COM
what to do now ?
let me know

samir494

Dear,

its still no working

snap is attached

samir494

dear,

increas karma if i is helpful to you

samir494

use the attached file

samir494

hi all,
is there anyone who solved this & working

samir494

you must reinstall.
is it possible to reinstall remotly ( not in same network ) by netinstall

MY PC--Switch--Router ---- Router--Switch--RB
10.X.X.X --------------------------------------192.X.X.X

please guide

samir494

you must reinstall.

is it possible to reinstall remotly ( not in same network ) by netinstall

MY PC--Switch--Router ---- Router--Switch--RB

please guide

samir494

dear, please go through full post, 1. i dont have full access 2. i cant change any policy setting 3. person who have full access left noe please help to recover password of setup a new password, also note that the device is in working condition i can open it in winbox through IP is it possible to in...

samir494

thanks dear for your support,

how can i change sensitive policy with write access group user login ?

it just give me error " not permitted (9)"

samir494

As mentioned in manual ( http://wiki.mikrotik.com/wiki/Manual:Router_AAA#Sensitive_information ), to create and download backup files you need user with 'sensitive' policy turned on . HTH, now let me what is the alternate to get password for user called = admin ( full aceess ) or way to recover pas...

samir494

It worked for me perfectly, passwords were recovered from backup file. Maybe you did something wrong or maybe passwords are blank? Regards, dear try to creat new user with write access, open winbox and used new user login then try to create backup & download backupfile let me know what it shows ?

samir494

My hotspot login page

hi rizwanshazad,
it nice & very simple looks good

can you share it for me?
pleas attach zip file of the same

samir494

Maybe this will help you:
http://mikrotikpasswordrecovery.com/

HTH,

dear,

this will only work when you have admin password
otherwise its showing "blank"

i recently joint the team and who know all the admin password had left

samir494

hi normis,

is there any possibility o resolve this ?

samir494

thanks dear ,,
is there any alternate?

because device is on top of tower which is 65 mtr from ground.
its remote location i can access that RB 433 but not open unless password,

or somewhat else feature like flashfig which configure remote device?

samir494

is there a way to recover password from device ?

samir494

open port three , there is option called " master port" select ether2
repeate the same for 4 & 5

samir494

v6rc5 has the image file. it is on our webpage. please somebody test it.

good news form you normis,

can share a download link for the same ?

samir494

simple way to accept policy ,, redirect you first page to Policy page , once user click accept button forward that user to login page
if user click not to accept ,ask user to contact helpdesk

samir494

Dear samir, many thanks for your reply, well that server you mentioned is what i am using in now, but the software i purchased it has alot of issues and always hang, that why i am moving to better solution (Mikrotik), regarding the RouterOS software licence i am taking Level 5, but i am confused wh...

samir494

/sys reset

it will ask for Reset the system to factory default

samir494

its better to go with X86 Board or You can use high Speed Serve like 520 Gb hdd Intel i5 3Ghz processor 6 GB RAM

samir494

hi,

its still remain the same, no access to internet as attahched snap

samir494

hi,

its still same

Attachments:

Untitled.png [ 43.93 KiB ]

samir494

share me the datiails you want to creat your page

samir494

is anybody resolved it?

samir494

snap attached

samir494

try to bypass you ip from hotspot and check you userman access

samir494

http://www.mikrotik.com/download/share/ ... 6.0rc6.npk

can share me usermanager for routeros-mipsbe-6.0rc6

samir494

it seems ok,

let check r u able to login in hotspot ? if yes than share IP add details
or you can share me valid out side ip or Team viewer from your pc which is connect to internet

samir494

any one have idea ?

i installed 6.3 usermanager & its running good, but i am not able to download CSV file,

backup of database in tar,

what to do in this to open it in csv formate

samir494

dear, follow the steps as mention here 1. Connect you cable modem to Port 1 and make it Dhcp Client , it will get ip from ISP 2. Connct you Digital tv to port 2 and make it Dhcp server 3. on port 3 you can connect your Switch select master port 2 4. ip add route default gate as interface 1 thats all...

samir494

hi,

go to ip, hotspot , server profile select you hotspot server, tick us raduis
now move to radius (ln main Menu ) set ip 127.0.0.1
ref attached snaps

Untitled1.png

samir494

attach your hotspot snap here

samir494

share your dhcp config here

samir494

hi paulley,

there is no need to authenticat hotspot with an email id

you can just creat a user ( you can specify his mail like xyz@abc.com, as usename)

feel free to call me

samir494

thanks,

i did some iptable rules & NAT , i see error as below snap

samir494

thanks,

i am not access websites, if i used same proxy in laptop than only i can open web sites

i dont want to use proxy in laptop ,
so kindly guide to setup the same in mikrotik

samir494

i cannot use internet from hotspot , i am able to login in hotspot
any one can guide for the same?

samir494

try to change LAN IC (D601 OR U601) for phy error

if still kernel not found , use some tricks to resolve ,

i resolve kernel issue

samir494

here is the sample voucher, <html> <head> <meta http-equiv="Content-Language" content="en-us"> <meta http-equiv="Content-Type" content="text/html; charset=windows-1252"> <title>User Manager Voucher Page - By Samir Mistry mistrysamir23@gmail.com</title> <meta n...

samir494

you can use deamon log software for the same,

you also need to do some config i system/log

samir494

This is our default template for hotel sites. Template comes from http://www.hotspotsystem.com (cloud based hotspot management and billing system, working really well with mikrotik)

can share this pages to me as zip
thanks

samir494

how to Change Usermanagar logo in 3.20

and where /umw folder saved ?

samir494

is there an to do this as attached file ?

samir494

Use v5.16 instead.

hi ,
from where i can get firmware for RB333 ?

samir494

aggred , but each ROS having different firmware

I AM USING 4.3 ROS & WITH THAT I WILL 2.39 AS YOU MENTIONED,

IS IT OK TO LOAD ROS 4.3 & FWF 2.39 ?

samir494

THANKS DEAR,

I WANT TO MAKE ALL BOARD ON SAME FIRMWARE & SAME ROS, HENC I NEED OLD FWF,
THANKS, IF CAN SEND ME FWF FILES ON SAMIRATDCG@YAHOO.COM

samir494

RouterBOARD firmware upgreade is included with RouterOS, so you can simply upgrade RouterOS to v5.16 and run "system routerboard upgrade" command to upgrade firmware. If you don't have RouterOS, you can get the files from RouterBOARD.com site, open any product, and check file box on the l...

Search found 236 matches