Were not running any encryption. Its all part of Pretoria wireless user group thats spanning the city or Pretoria. We've moved off of OSPF for our backbone routing. We only using OSPF for iBGP at our high sites (at the most 5 RB's most have 3). Its on the couple that we were testing 4.6 were of the ...

We've got it fairly tightly set. Though yes it seems to be and odd one that when it has hit us its hit a couple at one time. Then seems fine for a while. We have quiet a few sites and some remote so the chance that it might happen is unfortunately not a problem. It could be the interaction between O...

Try down grading to 4.5. We noticed that once we upgraded to 4.6 a couple of our router boards(about 5 that I have personally observed) were falling over(100% cpu and dynamic routing breaks). We think its to do with OSPF and your post makes us more certain about this. Though it only seemed to happen...

4.5

Have not tested with 4.6 though can't use that as there is a bug that causes the RB to fall over and go to 100% and stick there. We think that it has something to do with OSPF, either that or BGP.

Hi

Don't know if I'm doing something wrong but it seems that you can't set an IPv6 address for route filters.

ie It just sets the prefix to empty.

If I try and do it with winbox it says that its not a valid ip?

That could be it thanks

Don't know what happened but glad its now working Tried the same rule on 3 diffrent router boards and it didn't work. Now tested on two of them and its working again most probably a pebcac error

Running 4.2. Seems to be working now. I had simplified the rule to the point that it was a src-nat chain. Matching anything with an action of accept. Is seems to now be getting a packet count. Though is is still far less than a filter rule of the same. ie forward rule has match 30000 packets and the...

Is natting working on 4.2 with RB433 and firmware 2.23. Or do you need to do something wierd to get it to work ? Using src-nat and just and accept and can't get it to hit the rule

Any solution on this have and RB433AH with 2 Atheros 11N. Cpu goes up 95%

Some changes to allow for multiline scripts and brackets. Also an example of how to send a script to multiple servers <?php header("Content-Type: text/plain"); /* * RouterOS API * Based on the code of SpectatorCN at http://forum.mikrotik.com/viewtopic.php?f=9&t=32957 * Modified by Ali ...

Nope
Didn't work either

I was trying to run the following script /ip firewall mangle print without-paging :for i from=0 to={[/ip firewall mangle print count-only] - 1} do { \ /ip firewall mangle remove $i} I have found another way of doing it. Though was making sure that I had not missed something as there were other scrip...

Hi Trying to get the following working [timh@MikroTik] > :local i 0;:put $i;/ip firewall mangle remove $i; 0 no such item Though the following works [timh@MikroTik] > :local i 0;:put $i;/ip firewall mangle remove 0; 0 Not sure what I am doing wrong. Any help would be greatly appreciated.