Community discussions

Search found 259 matches

by planetcaravan
Sun Jun 30, 2019 11:22 am
Forum: The Dude
Topic: Send alarms when increasing the temperature
Replies: 4
Views: 595

Re: Send alarms when increasing the temperature

As long as the router has an OID that can be queried to determine the temperature - you can do this. Check out the Probes thread - there are details of how to build custom probes to generate alerts. I've created a service for temperature like this: Screenshot - 30_06_2019 , 10_18_11.png I've used: ...
by planetcaravan
Thu Jun 27, 2019 4:46 pm
Forum: RouterBOARD hardware
Topic: Fan switch on RB921UAGS-5SHPacD-NM
Replies: 0
Views: 281

Fan switch on RB921UAGS-5SHPacD-NM

Hello there, I'm using a lot of RB921UAGS-5SHPacD-NM. In the last days I had to phisically reboot three times a couple of RB921UAGS-5SHPacD-NM in different locations (with same outside temperature). Ping was KO, ethernet interface remains connected but there were no possibility to log into the devic...
by planetcaravan
Sat Jun 22, 2019 5:00 pm
Forum: Scripting
Topic: Delete all firewall address-list with one command
Replies: 4
Views: 314

Re: Delete all firewall address-list with one command

Hello and thanks for your answer. I tried both your command Last test I did: /ip firewall address-list remove [find where list="TEST-IP"] Many times I got this error: no such item (4) I've noticed that using this command not ALL IPs of that address-list were deleted. Each time I repeat the same comm...
by planetcaravan
Fri Jun 21, 2019 1:41 pm
Forum: Scripting
Topic: Delete all firewall address-list with one command
Replies: 4
Views: 314

Re: Delete all firewall address-list with one command

Do mean connections?
not connections, but all address list entry
by planetcaravan
Fri Jun 21, 2019 12:50 pm
Forum: Scripting
Topic: Delete all firewall address-list with one command
Replies: 4
Views: 314

Delete all firewall address-list with one command

Hi there,

Is there any possibility to delete with only one command ALL address lists present into the firewall?
by planetcaravan
Thu May 16, 2019 1:54 pm
Forum: RouterBOARD hardware
Topic: [mUPS] Powering PowerBOX Pro with 3 devices
Replies: 3
Views: 295

Re: [mUPS] Powering PowerBOX Pro with 3 devices

Thanks for answering. Anyway I should use PowerBox Pro power supply connected to the mUPS, correct?
by planetcaravan
Thu May 16, 2019 9:25 am
Forum: RouterBOARD hardware
Topic: [mUPS] Powering PowerBOX Pro with 3 devices
Replies: 3
Views: 295

[mUPS] Powering PowerBOX Pro with 3 devices

Hello, I'm trying mUPS for the first time. I got this scenario: 1 PowerBOX Pro is powering 1 NetMetal (RB921UAGS-5SHPacD) and 2 Dynadish 5 (total power consumption is less then 20 W). All cable are long less than 10 meters. All is working fine. I would like to power up the PowerBOX Pro using mUPS wi...
by planetcaravan
Wed May 08, 2019 9:04 am
Forum: Wireless Networking
Topic: Requests wrong RSN group cipher
Replies: 10
Views: 1075

Re: Requests wrong RSN group cipher

Just did what you said. Let's wait!
by planetcaravan
Tue May 07, 2019 2:12 pm
Forum: Wireless Networking
Topic: Requests wrong RSN group cipher
Replies: 10
Views: 1075

Re: Requests wrong RSN group cipher

I've changed as you suggested: /caps-man security add authentication-types=wpa2-psk encryption=aes-ccm group-encryption=aes-ccm \ name=chiave passphrase=b1122334455m but still got this RSN error: 12:46:08 caps,info D4:F4:6F:BA:01:D6@A-2GHz connected, signal strength -68 12:59:24 caps,info 30:35:AD:A...
by planetcaravan
Tue May 07, 2019 8:55 am
Forum: Wireless Networking
Topic: [CAPsMAN] Channel advise
Replies: 9
Views: 488

Re: [CAPsMAN] Channel advise

Thanks again for your answer.
I have not a specific case as I'm not an expert and I did less than 10 network with CAPsMAN. I was just intereseted in how use channels.
I didn't know that I would have to lowering the tx-power in a high density setup. Thanks again.
Any other suggestion?
by planetcaravan
Tue May 07, 2019 12:18 am
Forum: Wireless Networking
Topic: [CAPsMAN] Channel advise
Replies: 9
Views: 488

Re: [CAPsMAN] Channel advise

What about a CAPsMAN network with 10 CAPs with the same frequency?
by planetcaravan
Mon May 06, 2019 11:47 pm
Forum: Wireless Networking
Topic: [CAPsMAN] Channel advise
Replies: 9
Views: 488

Re: [CAPsMAN] Channel advise

So If I will define a channel-list, each CAPs will take a random frequency from that list?
by planetcaravan
Mon May 06, 2019 11:44 pm
Forum: Wireless Networking
Topic: Requests wrong RSN group cipher
Replies: 10
Views: 1075

Re: Requests wrong RSN group cipher

Thanks for answer.
The password was fake.
Do I have to remove wifi settings on the clients and add again to the network?
by planetcaravan
Mon May 06, 2019 11:34 pm
Forum: Wireless Networking
Topic: [CAPsMAN] Channel advise
Replies: 9
Views: 488

Re: [CAPsMAN] Channel advise

Thanks for your answer.
So you are suggesting to set a channel-list (example 2,4ghz: 1,7,13 or 1,5,9,13) and specify a single channel for all CAPs?
by planetcaravan
Mon May 06, 2019 11:26 pm
Forum: Wireless Networking
Topic: Requests wrong RSN group cipher
Replies: 10
Views: 1075

Re: Requests wrong RSN group cipher

@planetcaravan: Please dont use tkip as cipher if you are using only wpa/wpa2. Set encryption=aes-ccm and group-encryption=aes-ccm and check if that solves your problem. Is it ok? /caps-man security add authentication-types=wpa2-psk encryption=aes-ccm group-encryption=aes-ccm \ name=chiave passphra...
by planetcaravan
Mon May 06, 2019 10:50 pm
Forum: Wireless Networking
Topic: [CAPsMAN] Channel advise
Replies: 9
Views: 488

[CAPsMAN] Channel advise

Hi there,

I'm not a wireless expert.
I got a simple question about channel use. In a CAPsMAN network do I have to use the same channel for all CAPs? Or do I have to select different channel for each CAP?
by planetcaravan
Mon May 06, 2019 10:05 pm
Forum: Wireless Networking
Topic: Requests wrong RSN group cipher
Replies: 10
Views: 1075

Re: Requests wrong RSN group cipher

same problem also to me: 20:08:42 caps,info 30:35:AD:AC:28:08@Local-5GHz rejected, requests wrong RSN group cipher 20:08:42 caps,info 30:35:AD:AC:28:08@Local-2GHz rejected, requests wrong RSN group cipher My config: RouterBOARD 962UiGS-5HacT2HnT RouterOS version: 6.43.14 /caps-man channel add band=5...
by planetcaravan
Tue Apr 30, 2019 9:55 am
Forum: RouterBOARD hardware
Topic: mUPS - Data side information
Replies: 0
Views: 243

mUPS - Data side information

Hi there,

I'm not an eletronic/eletric expert. I'm interested in testing mUPS.
If I connect a Mikrotik device to the mUPS, how can I use the data side of the POE in order to log in into the Mikrotik Device?
Do I have to use the PoE In on mUPS?
by planetcaravan
Tue Mar 19, 2019 11:13 am
Forum: Wireless Networking
Topic: Big difference in the RX and TX signal rate
Replies: 4
Views: 306

Re: Big difference in the RX and TX signal rate

Didn't cheked it. Sorry.
by planetcaravan
Mon Mar 18, 2019 1:53 pm
Forum: Wireless Networking
Topic: Big difference in the RX and TX signal rate
Replies: 4
Views: 306

Re: Big difference in the RX and TX signal rate

I have very good line of signal.
After CPE replacement the signal went OK.
The problem remains on the old CPE with difference in the RX and TX signal rate
by planetcaravan
Mon Mar 18, 2019 12:47 pm
Forum: Wireless Networking
Topic: Big difference in the RX and TX signal rate
Replies: 4
Views: 306

Big difference in the RX and TX signal rate

Hello! I have different APs on my network (all NetMetal) with hundreds of CPEs (All double chain Mikrotik made). All 5 GHz I've noticed that after very high wind days on some CPEs I got very big difference in the RX and TX signal rate. Not all CPEs on AP have this problem. Signals went from -50/-48 ...
by planetcaravan
Thu Feb 07, 2019 6:33 pm
Forum: The Dude
Topic: Change default winbox port
Replies: 3
Views: 595

Re: Change default winbox port

How can I select the port parameter?
Cattura.PNG
by planetcaravan
Tue Jan 29, 2019 12:48 pm
Forum: The Dude
Topic: Change default winbox port
Replies: 3
Views: 595

Re: Change default winbox port

I'm interested too as I need to reach a RouterOS device on the internet which is listening on a different Winbox port.
Is it possible to set, for specific hosts, a different Winbox port?
by planetcaravan
Thu Nov 08, 2018 8:27 pm
Forum: RouterBOARD hardware
Topic: [PowerBox Pro] Devices won't reboot after system reboot
Replies: 1
Views: 353

[PowerBox Pro] Devices won't reboot after system reboot

Hi there,

I'm using PowerBox Pro (RB960PGS-PB) with 6.42.9 version of RouterOS.
I'm using it to power up some NetMetals.
I've noticed that when I do reboot to RB960PGS-PB no devices connected to it rebooted.
How is it possible? Is it my fault?
by planetcaravan
Fri Oct 12, 2018 12:19 am
Forum: Beginner Basics
Topic: How to select one of two gateways
Replies: 1
Views: 253

How to select one of two gateways

Hi there, I have this scenario ether1: wan ether2: wan ether3: lan both ether1 and ether2 are in dhcp client mode and can reach internet. Using traceroute I want to select ether1 or ether2 as interface to reach internet? How can I do this? Do I have to set cost on routes or do I have to manage the "...
by planetcaravan
Wed Sep 19, 2018 2:12 pm
Forum: General
Topic: [NETINSTALL] Error - board supports from 0.0
Replies: 1
Views: 376

[NETINSTALL] Error - board supports from 0.0

Hi,

I've downloaded the 6.43.1 version of Netinstall and the 6.43.1 image for RB3011UiAS-RM.
I've started the standard procedure for make a new install of RouterOS but as Netinstall find the RB3011UiAS-RM, I press "install" but an error message appears: "board supports from 0.0".

What's wrong?
by planetcaravan
Thu Jul 19, 2018 11:55 am
Forum: General
Topic: Client-to-Client communication in a VPN scenario
Replies: 7
Views: 740

Re: Client-to-Client communication in a VPN scenario

As no one of the client has a public IP address, I would like to use the VPN server to make the client-client communication possible.
How con I do it?
by planetcaravan
Sat Jul 14, 2018 7:34 pm
Forum: General
Topic: Client-to-Client communication in a VPN scenario
Replies: 7
Views: 740

Re: Client-to-Client communication in a VPN scenario

Could it works if I use EoIP tunnel between each VPN client connected to the central VPN server?
by planetcaravan
Sat Jul 14, 2018 7:21 pm
Forum: General
Topic: Client-to-Client communication in a VPN scenario
Replies: 7
Views: 740

Re: Client-to-Client communication in a VPN scenario

Thanks for your answer!

I would like that each client talk directly but only the VPN server has a public IP address!
by planetcaravan
Sat Jul 14, 2018 3:23 pm
Forum: General
Topic: Client-to-Client communication in a VPN scenario
Replies: 7
Views: 740

Client-to-Client communication in a VPN scenario

Hi there,

I have a senario with a VPN server (SSTP or PPTP) with multiple clients connected (all Mikrotik devices).
I want that each client can communicate with each other.

How can I make this?
by planetcaravan
Wed Apr 18, 2018 4:02 pm
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 49778

Re: Significant improvement for wireless Nv2 PtMP

Latency seems to be remains the same as before
Yes, I deliver voice service
by planetcaravan
Wed Apr 18, 2018 1:07 pm
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 49778

Re: Significant improvement for wireless Nv2 PtMP

I've updated 3 x 921UAGS-5SHPacD to 6.42 using:

Band: A/N
Channel: 20 MHz
NV2 with 50 downlink ratio

I've noticed a big increase on WLAN throughput
by planetcaravan
Wed Apr 18, 2018 11:40 am
Forum: General
Topic: Force to redirect after hotspot login
Replies: 2
Views: 406

Force to redirect after hotspot login

Hi there,

how is it possible to force login after a user authenticate on an hot spot?
by planetcaravan
Tue Apr 17, 2018 5:40 pm
Forum: Announcements
Topic: v6.42 [current]
Replies: 147
Views: 26228

Re: v6.42 [current]

Hi,

what is the detail of this update:
*) wireless - improved Nv2 PtMP performance;


Does it involve also AC standard?
Does it require the NV security?
by planetcaravan
Mon Apr 09, 2018 7:45 pm
Forum: General
Topic: File delete and Hotspot folder replacement after reboot
Replies: 1
Views: 341

File delete and Hotspot folder replacement after reboot

Hi, I've noticed a strange behaviour with hEX PoE lite: - I put file into the RB with drag and drop function - I reboot the RB - As the RB returns online, all file is deleted! - My custom hotspot folder is replaced with the standard Mikrotik hotspot login page I tested it with 6.38.5, 6.41.3 and 6.4...
by planetcaravan
Mon Mar 12, 2018 5:14 pm
Forum: RouterBOARD hardware
Topic: [Woobm] - Can't see characters while typing
Replies: 4
Views: 603

[Woobm] - Can't see characters while typing

Hi there!

I'm testing Woobom. I've connected it to a RB951Ui-2HnD and to a RB3001UiAS-RM.
I've noticed that when I connect using telnet, I can't see what I type. Commands are working but I can't see them while I type.
Is it a fault?
by planetcaravan
Fri Oct 27, 2017 5:17 pm
Forum: Wireless Networking
Topic: wlan1: Bridge port received packet with own address as source address, probably loop
Replies: 4
Views: 10837

Re: wlan1: Bridge port received packet with own address as source address, probably loop

I've checked some logs on m network (Layer 2 network) and I've noticed that sometimes bridge MAC address is the same of ether1 or wlan1.
I'm using dynamic WDS on bridge (ether1+wlan1)
It is my fault?
by planetcaravan
Tue Oct 03, 2017 6:20 pm
Forum: General
Topic: [hEX] 80 PPPoE session on RB750Gr3
Replies: 4
Views: 618

Re: [hEX] 80 PPPoE session on RB750Gr3

Thanks!
I will let you know as I will install and test it.
by planetcaravan
Tue Oct 03, 2017 5:26 pm
Forum: General
Topic: [hEX] 80 PPPoE session on RB750Gr3
Replies: 4
Views: 618

Re: [hEX] 80 PPPoE session on RB750Gr3

Hi and thanks for your answer,

Traffic will be lower than 50 Mbit in total and there is no NAT, firewall or QOS. Just PPPoE server function.
by planetcaravan
Tue Oct 03, 2017 1:28 pm
Forum: General
Topic: [hEX] 80 PPPoE session on RB750Gr3
Replies: 4
Views: 618

[hEX] 80 PPPoE session on RB750Gr3

Hi there,

I'm planning to put 80 PPPoE session on RB750Gr3. I've seen that this device has double core 880 MHz CPU.
Do you think RB750Gr3 it will be a good choiche?
by planetcaravan
Tue Oct 03, 2017 12:23 pm
Forum: General
Topic: Move PPPoE server from AP to border router
Replies: 4
Views: 572

Re: Move PPPoE server from AP to border router

Thanks djfrancis, it work perfectly!!
by planetcaravan
Wed Sep 27, 2017 12:07 am
Forum: General
Topic: Move PPPoE server from AP to border router
Replies: 4
Views: 572

Re: Move PPPoE server from AP to border router

Hi, and thanks for your answer.
How would be done the VLAN config?
by planetcaravan
Sat Sep 23, 2017 8:13 pm
Forum: General
Topic: RB1100AHx4 as a proxy server
Replies: 1
Views: 821

RB1100AHx4 as a proxy server

Hi there,

I've looked at the 60GB SSD on RB1100AHx4 Dude Edition.
Does someone think that this device would be a good solution to cache web traffic (YouTube included)?
by planetcaravan
Sat Sep 23, 2017 8:08 pm
Forum: General
Topic: Move PPPoE server from AP to border router
Replies: 4
Views: 572

Move PPPoE server from AP to border router

Hi there, I've got this simple scenario: PPPoE su BS.png CPE connects to the NetMetal. NetMetal has PPPoE server on wlan1 and a private IP for management on ether1. NetMetal is connected to a RB1100AHx2. Now I can have full access (winbox and SSH) to NetMetal and RB1100AHx2 I would like to have this...
by planetcaravan
Wed May 24, 2017 12:00 pm
Forum: Beginner Basics
Topic: Run Winbox on a Raspberry Pi?
Replies: 21
Views: 7323

Re: Run Winbox on a Raspberry Pi?

But is cheap and works great
by planetcaravan
Sat May 20, 2017 8:43 pm
Forum: Beginner Basics
Topic: Run Winbox on a Raspberry Pi?
Replies: 21
Views: 7323

Re: Run Winbox on a Raspberry Pi?

you can run winbox in raspberry pi using wine by first installing exagear desktop. here's the link https://eltechs.com/product/exagear-desktop/ Did you tested it? I'm in the same situation and I want to test ExaGear Desktop in order to run Winbox on Raspberry Pi I used ExaGear Desktop + Wine and Wi...
by planetcaravan
Fri Mar 24, 2017 3:00 pm
Forum: General
Topic: SSTP client on Windows without certificates
Replies: 2
Views: 2088

SSTP client on Windows without certificates

Hi there, I'm using RouterOS 6.38.5 on RB3011UiAS. I've setup an SSTP server in this way: /interface sstp-server server set authentication=pap,chap,mschap1,mschap2 certificate=none default-profile=default-encryption enabled=yes force-aes=no keepalive-timeout=60 max-mru=1500 max-mtu=1500 mrru=\ disab...