MikroTik

planetcaravan

Yes, we actually need it!

planetcaravan

Is there any plan for have more then 1 Gbits/s speed on 60 GHz devices?
I'm testing Wireless Wire nRAY and I like it but I would like to use more then 1 Gbit/s on Ethernet transfer.

planetcaravan

I've used

/ip firewall address-list remove [find dynamic=no]

from / context and it worked good.

planetcaravan

IT WORKS!

I've used this command on a single line

/ip firewall address-list remove [find dynamic=no]

It delete ALL 1200 address list (even dynamic) without any error.

Thanks!!

planetcaravan

Last command seems work better but some entries are not deleted.
I did a video: https://gfycat.com/bravewealthygermanpinscher

planetcaravan

Thanks again but it is asking number

[admin@ROUTER] > /ip firewall address-list remove
numbers:

planetcaravan

Thanks for your kind answer

This code is still not deleting all address lists

:do { /ip firewall address-list remove [find] } on-error={}

Most of the entries remains after entering the command

planetcaravan

Still having this probelm even with 6.44.6

no such item (4)

planetcaravan

As long as the router has an OID that can be queried to determine the temperature - you can do this. Check out the Probes thread - there are details of how to build custom probes to generate alerts. I've created a service for temperature like this: Screenshot - 30_06_2019 , 10_18_11.png I've used: ...

planetcaravan

Hello there, I'm using a lot of RB921UAGS-5SHPacD-NM. In the last days I had to phisically reboot three times a couple of RB921UAGS-5SHPacD-NM in different locations (with same outside temperature). Ping was KO, ethernet interface remains connected but there were no possibility to log into the devic...

planetcaravan

Hello and thanks for your answer. I tried both your command Last test I did: /ip firewall address-list remove [find where list="TEST-IP"] Many times I got this error: no such item (4) I've noticed that using this command not ALL IPs of that address-list were deleted. Each time I repeat the...

planetcaravan

Do mean connections?

not connections, but all address list entry

planetcaravan

Hi there,

Is there any possibility to delete with only one command ALL address lists present into the firewall?

planetcaravan

Thanks for answering. Anyway I should use PowerBox Pro power supply connected to the mUPS, correct?

planetcaravan

Hello, I'm trying mUPS for the first time. I got this scenario: 1 PowerBOX Pro is powering 1 NetMetal (RB921UAGS-5SHPacD) and 2 Dynadish 5 (total power consumption is less then 20 W). All cable are long less than 10 meters. All is working fine. I would like to power up the PowerBOX Pro using mUPS wi...

planetcaravan

Just did what you said. Let's wait!

planetcaravan

I've changed as you suggested: /caps-man security add authentication-types=wpa2-psk encryption=aes-ccm group-encryption=aes-ccm \ name=chiave passphrase=b1122334455m but still got this RSN error: 12:46:08 caps,info D4:F4:6F:BA:01:D6@A-2GHz connected, signal strength -68 12:59:24 caps,info 30:35:AD:A...

planetcaravan

Thanks again for your answer.
I have not a specific case as I'm not an expert and I did less than 10 network with CAPsMAN. I was just intereseted in how use channels.
I didn't know that I would have to lowering the tx-power in a high density setup. Thanks again.
Any other suggestion?

planetcaravan

What about a CAPsMAN network with 10 CAPs with the same frequency?

planetcaravan

So If I will define a channel-list, each CAPs will take a random frequency from that list?

planetcaravan

Thanks for answer.
The password was fake.
Do I have to remove wifi settings on the clients and add again to the network?

planetcaravan

Thanks for your answer.
So you are suggesting to set a channel-list (example 2,4ghz: 1,7,13 or 1,5,9,13) and specify a single channel for all CAPs?

planetcaravan

@planetcaravan: Please dont use tkip as cipher if you are using only wpa/wpa2. Set encryption=aes-ccm and group-encryption=aes-ccm and check if that solves your problem. Is it ok? /caps-man security add authentication-types=wpa2-psk encryption=aes-ccm group-encryption=aes-ccm \ name=chiave passphra...

planetcaravan

Hi there,

I'm not a wireless expert.
I got a simple question about channel use. In a CAPsMAN network do I have to use the same channel for all CAPs? Or do I have to select different channel for each CAP?

planetcaravan

same problem also to me: 20:08:42 caps,info 30:35:AD:AC:28:08@Local-5GHz rejected, requests wrong RSN group cipher 20:08:42 caps,info 30:35:AD:AC:28:08@Local-2GHz rejected, requests wrong RSN group cipher My config: RouterBOARD 962UiGS-5HacT2HnT RouterOS version: 6.43.14 /caps-man channel add band=5...

planetcaravan

Did you solved your problems?

planetcaravan

Hi there,

I'm not an eletronic/eletric expert. I'm interested in testing mUPS.
If I connect a Mikrotik device to the mUPS, how can I use the data side of the POE in order to log in into the Mikrotik Device?
Do I have to use the PoE In on mUPS?

planetcaravan

Didn't cheked it. Sorry.

planetcaravan

I have very good line of signal.
After CPE replacement the signal went OK.
The problem remains on the old CPE with difference in the RX and TX signal rate

planetcaravan

Hello! I have different APs on my network (all NetMetal) with hundreds of CPEs (All double chain Mikrotik made). All 5 GHz I've noticed that after very high wind days on some CPEs I got very big difference in the RX and TX signal rate. Not all CPEs on AP have this problem. Signals went from -50/-48 ...

planetcaravan

How can I select the port parameter?

Cattura.PNG

planetcaravan

I'm interested too as I need to reach a RouterOS device on the internet which is listening on a different Winbox port.
Is it possible to set, for specific hosts, a different Winbox port?

planetcaravan

Hi there,

I'm using PowerBox Pro (RB960PGS-PB) with 6.42.9 version of RouterOS.
I'm using it to power up some NetMetals.
I've noticed that when I do reboot to RB960PGS-PB no devices connected to it rebooted.
How is it possible? Is it my fault?

planetcaravan

Hi there, I have this scenario ether1: wan ether2: wan ether3: lan both ether1 and ether2 are in dhcp client mode and can reach internet. Using traceroute I want to select ether1 or ether2 as interface to reach internet? How can I do this? Do I have to set cost on routes or do I have to manage the &...

planetcaravan

Hi, I've downloaded the 6.43.1 version of Netinstall and the 6.43.1 image for RB3011UiAS-RM. I've started the standard procedure for make a new install of RouterOS but as Netinstall find the RB3011UiAS-RM, I press "install" but an error message appears: "board supports from 0.0"....

planetcaravan

As no one of the client has a public IP address, I would like to use the VPN server to make the client-client communication possible.
How con I do it?

planetcaravan

Could it works if I use EoIP tunnel between each VPN client connected to the central VPN server?

planetcaravan

Thanks for your answer!

I would like that each client talk directly but only the VPN server has a public IP address!

planetcaravan

Hi there,

I have a senario with a VPN server (SSTP or PPTP) with multiple clients connected (all Mikrotik devices).
I want that each client can communicate with each other.

How can I make this?

planetcaravan

Latency seems to be remains the same as before
Yes, I deliver voice service

planetcaravan

I've updated 3 x 921UAGS-5SHPacD to 6.42 using:

Band: A/N
Channel: 20 MHz
NV2 with 50 downlink ratio

I've noticed a big increase on WLAN throughput

planetcaravan

Hi there,

how is it possible to force login after a user authenticate on an hot spot?

planetcaravan

Hi,

what is the detail of this update:

*) wireless - improved Nv2 PtMP performance;

Does it involve also AC standard?
Does it require the NV security?

planetcaravan

Hi, I've noticed a strange behaviour with hEX PoE lite: - I put file into the RB with drag and drop function - I reboot the RB - As the RB returns online, all file is deleted! - My custom hotspot folder is replaced with the standard Mikrotik hotspot login page I tested it with 6.38.5, 6.41.3 and 6.4...

planetcaravan

I used putty

planetcaravan

Hi there!

I'm testing Woobom. I've connected it to a RB951Ui-2HnD and to a RB3001UiAS-RM.
I've noticed that when I connect using telnet, I can't see what I type. Commands are working but I can't see them while I type.
Is it a fault?

planetcaravan

I've checked some logs on m network (Layer 2 network) and I've noticed that sometimes bridge MAC address is the same of ether1 or wlan1.
I'm using dynamic WDS on bridge (ether1+wlan1)
It is my fault?

planetcaravan

Thanks!
I will let you know as I will install and test it.

planetcaravan

Hi and thanks for your answer,

Traffic will be lower than 50 Mbit in total and there is no NAT, firewall or QOS. Just PPPoE server function.

planetcaravan

Hi there,

I'm planning to put 80 PPPoE session on RB750Gr3. I've seen that this device has double core 880 MHz CPU.
Do you think RB750Gr3 it will be a good choiche?

planetcaravan

Thanks djfrancis, it work perfectly!!

planetcaravan

Hi, and thanks for your answer.
How would be done the VLAN config?

planetcaravan

Hi there,

I've looked at the 60GB SSD on RB1100AHx4 Dude Edition.
Does someone think that this device would be a good solution to cache web traffic (YouTube included)?

planetcaravan

Hi there, I've got this simple scenario: PPPoE su BS.png CPE connects to the NetMetal. NetMetal has PPPoE server on wlan1 and a private IP for management on ether1. NetMetal is connected to a RB1100AHx2. Now I can have full access (winbox and SSH) to NetMetal and RB1100AHx2 I would like to have this...

planetcaravan

But is cheap and works great

planetcaravan

you can run winbox in raspberry pi using wine by first installing exagear desktop. here's the link https://eltechs.com/product/exagear-desktop/ Did you tested it? I'm in the same situation and I want to test ExaGear Desktop in order to run Winbox on Raspberry Pi I used ExaGear Desktop + Wine and Wi...

planetcaravan

Thanks!

planetcaravan

Hi there, I'm using RouterOS 6.38.5 on RB3011UiAS. I've setup an SSTP server in this way: /interface sstp-server server set authentication=pap,chap,mschap1,mschap2 certificate=none default-profile=default-encryption enabled=yes force-aes=no keepalive-timeout=60 max-mru=1500 max-mtu=1500 mrru=\ disab...

planetcaravan

Hi there,

I'm staring using VirtualBox and GNS in order to run RouterOS.
Is it possible to add one ore more wireless interface to test them in a virtual environment?

planetcaravan

you can run winbox in raspberry pi using wine by first installing exagear desktop. here's the link
https://eltechs.com/product/exagear-desktop/

Did you tested it?
I'm in the same situation and I want to test ExaGear Desktop in order to run Winbox on Raspberry Pi

planetcaravan

Can anybody help me, please?

planetcaravan

Hi there,

I've setup one L2TP server and two L2TP clients on RouterOS 6.37.3. I've set up proxy-arp con L2TP server LAN interface
Each L2TP client can communicate with server but L2TP clients can't communicate with each other.
What's my fault?

planetcaravan

planetcaravan

Same problem with 6.35.4: uptime radio is higher than PPPoE

Screenshot - 15_06_2016 , 11_45_58.png

planetcaravan

Hi there,

I've just moved two BaseBox 5 to RouterOS 6.35.2. All BaseBox 5 are working like AP and PPPoE server.
I've noticed that are big difference between CPE radio uptime and PPPoE client uptime.

Look here the difference:

Screenshot - 15_06_2016 , 10_20_07.png

What could be the problem?

planetcaravan

Hi,

I've just updated a brand new LHG 5 from 6.35.1 to 6.35.2 and it bricked! Can't access, can't see on WinBox, ether1 is up only for 1 second.

planetcaravan

Really cool! I will try and I will let you if it will work for me

planetcaravan

Hi there, I've set up a VPN client to site in this way: RB2011: server (My LAN) RB951: client (on the internet) Now I can access the VPN client directly from my LAN. VPN client has the same subnet of my LAN. How can I assing a different pool for the VPN client and keep reaching the VPN client from m...

planetcaravan

Hi!

Did you solved this problem only using two rules?

planetcaravan

Hi,

What did you mean for "MAC admin" ?

planetcaravan

Hi there, I'm using several NetMetal 5 and NetMetal 5 as PPPoE server. My customers connect via wlan1 and generate a PPPoE connection on the AP. I'm using external radius. I'm using only RouterOS 6.3x.x stable versions. I've noticed that many times on different locations the number of stations is le...

planetcaravan

Thanks, the command worked like a charm!

planetcaravan

Got it. Does the command help PowerBox to turn on other devices?

planetcaravan

Hi and thanks for your answer.
Does this command turn on the PowerBox or other devices?

planetcaravan

Hi there, I'm trying to turn on one SXT Lite5 and one cAP via PoE using PowerBox or RB750UP. I turn on the PowerBox via PoE on ether1 and put on ether2 and ether3 one SXT Lite5 and one cAP. Both of them won't turn on! I also check the cable and tried turning on a RB951Ui-2HnD but there is no way to ...

planetcaravan

Netinstall with 6.31 will fix it http://wiki.mikrotik.com/wiki/Manual:Netinstall#NetInstall_Description RouterBOARD 750UP is not affected by the issue described above. is possible you can't access it for some other reason. It is possible to make Netinstall without serial port? Of course. Press the ...

planetcaravan

Thanks for your answer. But why I can not set up a VLAN in this scenario?

planetcaravan

With a bridge I will not access directly the ether1 via Winbox cause it will become part of the PPPoE bridge.

planetcaravan

Hi there, I' have this scenario: RB912 wlan1 - ether1 <-----> ether1 - ether2 RB450G RB912: wlan1 : ap bridge for CPE ether1 : linked to ether1 of RB450G RB450G ether1 : linked to ether1 of RB912 ether2 : PPPoE Server I want to link RB912 wlan1 to RB450G ether2 in order to permit to CPE on RB912 wla...

planetcaravan

Switch channel width from Ce to eC or use another channel.

I've updated to 6.28 and set eC and channel is 40MHz! Thanks
CCQ is little bit lower. I will try also to change frequency.

planetcaravan

Hi and thanks for your answer.

Here is what I'm getting:

planetcaravan

Hi there, I'm using two RB921UAGS-5SHPacD with Router OS 6.23 with this config: set [ find default-name=wlan1 ] band=5ghz-a/n/ac channel-width=20/40mhz-Ce country=italy disabled=no frequency=5240 \ frequency-mode=superchannel hw-retries=15 l2mtu=1600 mode=bridge radio-name=LINK rx-chains=0,1 securit...

planetcaravan

Thanks for your answer. This PPPoE is connected to the internet via ether1 and I want to set a PPPoE client on the same RB in order to create a LAN network on the other ethernet interfaces of the RB.

planetcaravan

Here is my config: /interface bridge add name=bridge-PPP /interface bridge port add bridge=bridge-PPP interface=ether2 /ip pool add name=pool-ppp ranges=172.16.6.2-172.16.6.100 /ppp profile add bridge=bridge-PPP change-tcp-mss=yes local-address=172.16.6.254 name=\ profilePPP remote-address=pool-ppp ...

planetcaravan

Hi there,

I've set up a simple PPPoE server with a local PPP user on an RB951Ui-2HnD (RouterOS 6.27).
I've created a PPPoE client interface (using with the local PPP user) on the same RB951Ui-2HnD.
My problem is tat the session never becomes active... What is my error?

planetcaravan

Fast home installation

IMG_20150216_181029.jpg

planetcaravan

Cool! Where did you found this?

planetcaravan

Hi,

I just used this http://wiki.mikrotik.com/wiki/PayPal_wi ... den_bypass and did an edit in order to use Akamai.
Let me know if it works for you.

planetcaravan

I modified the Paypal script in order to work with Facebook and Akamai.
It worked like a charm!

planetcaravan

Thanks for your answer. I'm excited about this new standard as I want to dismiss all Ubiquiti backhauls.

planetcaravan

Ciao e grazie per la risposta.

Nel security profile c'è il tikip, su wireless protocol ho "any"
Come è possibile che spesso (in meno di 30 minuti) la latenza sale su quasi tutte le frequenze?
Come posso indagare?

planetcaravan

Hi there, I'm using an RB912UAG-5HPnD (RouterOS 6.18) as WISP AP with 50 stations. CPE are both Mikrotik and Ubiquiti. Here is my problem (noticed also with a RBMetal5SHPN on the same site): very often at all frequencies latency is very high but only on Ubiquiti CPEs I've got packet loss . What coul...

planetcaravan

Hi there,

I'm looking to move all my backhaul from 802.11AN to the new 802.11ac. Is it possible to use a 802.11AN AP in order to connect a 802.11ac station?

planetcaravan

I still not tried the script but in order to find a rapid solution I did this:

/ip hotspot walled-garden ip
add action=accept comment=AKAMAI disabled=no dst-address=5.178.42.0/24

It solved my problem.

I will check the script and find a solution. I will update this thread.

planetcaravan

Thanks, I sent it!

planetcaravan

What could be the cause in my case?
What do I have to do?

planetcaravan

Thanks for your answer.
I'm not logging on flash. Look at the screenshot.
How can I do a check-disk via RouterOS?
What is spi on profiler?

planetcaravan

Hi there, I'm using an RB433AH as a AP with PPPoE server. I've noticed increase of CPU using and bad blocks. I also noticed a new profile item. Look at the screenshot. I looked at the wiki ( http://wiki.mikrotik.com/wiki/Manual:Tools/Profiler ) but I could not find anything about "spi". Wh...

planetcaravan

UP!

planetcaravan

Thanks for your answer. As I'm using the link you suggested, what destination do I have to set as I'm using a PPPoE client? Mikrotik example: add chain=prerouting dst-address=10.112.0.0/24 action=accept in-interface=LAN My case: add chain=prerouting dst-address=172.16.9.98 in-interface=LAN Does the ...

planetcaravan

5 or 10 km

planetcaravan

Hi there,

I've just read the news about the new RB953GS-5HnT. I want to buy two of them to make a point-to-point connection.
I want to use a dish antenna. Which one do I have to buy?

planetcaravan

Hi there,

I want to set up a load balancer in order to sum bandwidth of two ISPs.

My router has 2 interfaces
ether 1 with global IP address -> ISP 1
ether 2 with PPPoE client -> ISP 2

Is is possibile to make a load balancer with PPPoE client on ether2?

planetcaravan

Hi there, I'm using a RB Metal 2SHPn with a 15db sector in outdoor. This is an hotspot system with RouterOS 6.15 with latest firmware. Other hotspot can see my ssid, my hotspot can see other hotspots but no terminal can't see my hotspot. Here is my config /interface wireless set [ find default-name=...

planetcaravan

OK, this is my installation... but it's only a test!

Look at the way I've set the grid!

planetcaravan

It works!
AP Ubiquiti with WPA2 AES, WDS, airMax off, Mikrotik CPE connected to the AP
I've attached two screenshots.

planetcaravan

Some years ago I try to made this link without any proprietary protocol but I had no connection.
I will try as you suggest. Thanks

planetcaravan

Hi,

is possible to connect a Mikrotik wireless device to an Ubiquiti AP with WPA2?

planetcaravan

I've upgraded two brand new SXT Lite 5 from 5.26 to 6.14. As I reboot the the device, wireless menu item does not appears on menu.
The package is enabled
As I reboot the device, the menu item show up.

planetcaravan

I also used RB2011UiAS-2HnD to turn on BaseBox5 (RB912)

planetcaravan

Thank you.
I hope Mikrotik will check this issue. Do I have to open a ticket?

planetcaravan

I've got this problem also with RouterOS 6.11. Do you have your Omnitik in a production environment?

planetcaravan

Hi and thanks for your answer. Did you experienced this problem with other devices too?

planetcaravan

What RouterOS version are you using?

planetcaravan

Hi there,

I'm using RB2011UiAS-2HnD with RouterOS 6.13 and latest firmware.
I've noticed that it can turn on (on ether10) some devices. I used it with a SXT Lite5 and a Ubiquiti device.
I've noticed that RB2011UiAS-2HnD could not turn on RB OmniTIK U-5HnD.
Is it correct?

planetcaravan

I've used original power supply, original Gigabit POE on 3 OmniTik with no configuration (system reset no default=yes) with the latest RouterOS and firmware. The problem is this: as I connect the POE to any Ethernet port all 6 leds turn on Look at theese three pictures http://s24.postimg.org/e88hlqi...

planetcaravan

I suggest you to save export compact and reinstall from zero with netinstall, or later you can block completly the routerboard....

This is a production device!
What could be the cause of the problem?

planetcaravan

Hi there, I'm using a Metal 5SHPn as an AP with PPPoE server on board. In the attached images you can find informations about the device. Each time I press the backup button I have: may/08/2014 17:49:19 backup,critical error creating backup file: could not read al l configuration files What could be...

planetcaravan

I've reset it 10 times. What you mean about set led?

planetcaravan

Hi there, I've just unboxed a brand new RB OmniTIK U-5HnD. I updated both RouterOS and RouterBoard to the latest versions. The device has no configurations and I've reset it 10 times. Now as I plug the PoE Ethernet plug into any switch, all RB OmniTIK U-5HnD's LEDs turn on. I changed power supply, P...

planetcaravan

Hi there, thanks for all your posts. Here is what I have: ip proxy print enabled: no Address list: /ip firewall address-list add address=64.233.161.0/24 list=Google add address=64.233.183.0/24 list=Google add address=66.102.7.0/24 list=Google add address=66.249.93.0/24 list=Google add address=64.233...

planetcaravan

What did you mean with:

if your firewall/router etc. is compromised

?

I'm using all Mikrotik routers an all NAS and internet gateway. All is working fine

planetcaravan

What about log every NAS and watch which NAS is doing the biggest traffic?

planetcaravan

Loot at my post http://forum.mikrotik.com/viewtopic.php ... 4&p=416630

planetcaravan

Hi there,

I've a WISP with 100+ users with 1 public IP address. I'm facing this problem https://support.google.com/websearch/answer/86640?hl=en.
How can I find which user IP is sending automated queries to Google?
I've set up a mangle rule but just can't find anything.

Can somebody help me?

planetcaravan

I've noticed the problem is on a particular Ubiquiti build.
Here is what I have on Ubiquiti

Firmware Version: XW.v5.5.6
Build Number: 18861

Dropbear server v2013.58

On previous build (17762) SSH problem was not present!

planetcaravan

I think you can use RouterOS on all base stations, don't you?

planetcaravan

Hi there,

I just red something about this: http://www.sequreisp.com/?locale=en
Does anyone tried this? They also have an open source version you can download ad install by yourself.

planetcaravan

I'm using RB2011L as router for pppoe-client, vpn, hotspot, sstp-client. Now is running 6.10 and all is working fine. I've updated from 6.9.

planetcaravan

Does someone noticed CCQ changes on RouterOS 6.9?

planetcaravan

Thanks!

planetcaravan

I have RB2011 working on 6.0 The router is ~100km away from my office. I really want to upgrade it but I don't have intensions to travel on site to do downgrade. Is it safe to upgrade to 6.9 RB2011? I'm using RB2011 as router for adsl, vpn, hotspot, sstp-client. Now is running 6.9 and all is workin...

planetcaravan

I've red this

The configuration of the router will be lost

on http://wiki.mikrotik.com/wiki/Manual:Ro ... owngrading

Is it confirmed? I want to donwgrade from 6.7 to 6.7 as I'm guessing that new version cut some CCQ on several AP

planetcaravan

Thanks karina,

as I used your tip, mi link is stable and it did not ever had an uptime like this!
I'm using 3 SXT connected to a Groove5 all on RouterOS 6.7

planetcaravan

Hi and thanks for all your answers. My RB1000 had and uptime of 250 days. As I was experiencing disk problem I bought a new RB.
I turned off the old RB1000 and it doesn't boot anymore!
So maybe my problem was that RB1000 was slowly dying!

planetcaravan

Hi there, I've set up a trasparent proxy and all is working fine on RouterOS 6.7 (RB750GL). I want to set a redirect for certain source IP address (lan's host 192.168.100.254) to a local RB webpage (locate in /proxy/1.html). I set up the rule below but It's not taking any hit: What's my fault? http:...

planetcaravan

I just want to connect the Ethernet cable with PoE!

planetcaravan

Thanks!

planetcaravan

As I access to the device for the first time and I disable all wireless interface, is it safe to operate on the device?

planetcaravan

Hi, I've just bought two RB912-OUT. What is the purpose of the box in the first image? Is something for the ground? I've another question. I've red the warning on the image I've attached. Based on my experience with Mirkotik wireless device, each time I've access for the first time to a router, all ...

planetcaravan

Help me, please, I don't know what is using my system disk!

planetcaravan

Do that memories could be used to store RouterOS update?

planetcaravan

Hi there,

I want to move from RB1000 to RB1100 or CCR. I've noticed that RB1000 and RB1100 series has very small system disk. Is there any possibility to upgrade RouterOS using external microSD on RB1100x2?
What is the CCR system disk's size?

planetcaravan

Hi there, I'm using RouterOS 5.25 on a RB1000. I'm sure that external flash card has problem but I'm not using it. I've noticed that in the file section packages are downloading automatically without any manual action. I delete theese file but system disk is still full. What can I do? I've attached ...

planetcaravan

Thanks!

It was that!

planetcaravan

Hi, I've this situation with RouterOS 6.7: PC -> Metal2 (PPPoE Client) -> RB750 (PPPoE Server) -> ADSL Router Metal2 (PPPoE Client) is correctly connected to RB750 (PPPoE Server). RB750 ping internet but Metal2's tracert to internet stops to RB750 and is having timeout . RB750 has a default route to...

planetcaravan

I've noticed that problems with Apple devices is not related to the presence of many AP... Sometimes appears "is not possible to access to the network".
I tried this only on open systems

planetcaravan

Are you seeing any events being logged in the access point that you are connecting to?

NO!

planetcaravan

Hi praeses,

I'm not having DNS problem but usually with some Samsung (Android) I'm having similar problems like with Apple devices (as I described before).

planetcaravan

This is an open system!

planetcaravan

Thanks, I will try and I will let you know

planetcaravan

Hi there, I've already red a couple of problems about Apple devices connecting to Mikrotik devices. Here is my problem: I've installed 10 Groove/Metal (each on different frequency). All APs run RouterOS 6.1 and have no key to access to wifi as this is an hotspot network. Many times Apple devices can...

planetcaravan

Hi there,

I've got this on an Omnitik

ether1: 192.168.1.5 (GATEWAY is 192.168.1.1)
ether3: 192.168.2.1

I want that a PC connected to ether can ping 192.168.1.1

What rule do I have to insert?

planetcaravan

I've used:

/system reset-configuration no-defaults=yes

but as I'm on a production system, I can't use:

/system routerboard upgrade)

or a fresh netinstall

planetcaravan

Yes...

And also after many "system reset" and software upgrade.

planetcaravan

CPU stays at 100% even I if don't run torch

planetcaravan

Thanks for your link but I need to log also which user manager user is doing what!

planetcaravan

All TCP and UDP connections

planetcaravan

As I'm working as a WISP I need to log all traffic generated by each client of my network.

planetcaravan

Can you suggest me a compatible modem with an external antenna with the highest gain?

planetcaravan

Any idea about it?

planetcaravan

Any idea about it?

planetcaravan

I have to log all traffic for each radius user!

planetcaravan

Hi,

I'm using a RB433 as a PPPoE server. User manager is on another machine. How can I log all traffic generated by the users?
What logging topic do I have to turn on?

planetcaravan

Here is it

planetcaravan

Hi there,

I'm using an RB1000 with RouterOS 5.25 as a gateway and radius for an ISP with 50 customer.
I've noticed that my CPU is alweys at 100% even if the main process using CPU is "idle".
I've made an attachmnet. Is there anything wrong?

planetcaravan

Thanks for wall your answers. What about the miniPCI you posted? Is that an external connection to a 3G antenna? Is that a Mikrotik board?

planetcaravan

Hi there,

is possible with RB411UAHR to use an external antenna to get a better signal for 3G?

planetcaravan

I need to enable the user manager package again.
What can I do to know why CPU goes to 100% as I enable the user manager package?

planetcaravan

Hi there, I'm using Rouster OS 5.16 and I can't see my clock synched with NTP client I've set up: I'm having this: [admin@AP] /system ntp client> print enabled: yes mode: unicast primary-ntp: 193.204.114.105 secondary-ntp: 193.204.114.233 poll-interval: 16s active-server: 193.204.114.233 [admin@AP] ...

planetcaravan

I did not used quickonfig. I'm having problem on a public IP address on the RB. So connections are outside from inside global address!
I see the traffic incoming on the interface but my RB won't answer to external request!

planetcaravan

Hi,

I'm using a Mikrotik router as a gateway to the internet.
I've noticed that every inside request from outside is working. Each request from the outside (internet) to the inside is blocked. I see all theese connections with torch...how can I permit theese connections from outside?

planetcaravan

Hi there, I've got this situation: http://img202.imageshack.us/img202/4310/schmeamikrotik.png I'm on Router A and I want to ping Router B. Which static route I have to insert on all routers? I've made a couple of configurations but I can communicate only between A and B - B and C. A can't ping C. Ca...

planetcaravan

Thanks!

planetcaravan

Hi there,

I'm using RouterOS 5.23. I want to delete with one entry (via CLI) all dynamic DHCP server leases.
Is it possible?

Thanks

planetcaravan

Are you suggest to redirect each DNS request to Mikrotik IP address?
What I have to specify for the static DNS entry?

planetcaravan

Thanks for your answer.
How did you discovered it? Did you made any tests?

planetcaravan

So If I couldn't reach a remote DNS server, hotspot automatic redirect won't work?

planetcaravan

Can somebody help me, please?

planetcaravan

Hi there, I want to use Mikrotik's hotspot function to redirect all traffic to a local webpage without internet access. Each time my hotspot can't reach internet, hotspot redirect won't work. What can I do to avoid this? I don't need internet access. Here I've noticed that has been used a rule to ch...

planetcaravan

Thanks for your answer.
Do I need to set both of two switches on this "Switch all ports" in order to do what you're suggested?

planetcaravan

Hi there,

this is the first time I'm using an RB2011L. I've noticed that there are in Ethernet interface detail two "switch": 0 and 1.

How do they work? Are they different switches? Does hosts on switch 1 can communicate with switch 0?

Thanks!

planetcaravan

What if I use "manual tx-power?"

planetcaravan

Hi there,

I'm using an RB751G-2HnD without an external antenna connected.
Is it dangerous?

Thanks

planetcaravan

I want to use VLAN instead of routing, L2TP or WDS.

planetcaravan

Hi there,

Is it possibile to set a Mikrotik Hotspot as a public HTTP proxy?
I want to set up an RB with hotspot service on a public network making it reachable from the whole internet or only for a private LAN.

bye!

planetcaravan

What about VLANs?

planetcaravan

Wich configuration I have to use if I choose L2TP?

planetcaravan

Hi there, Thanks for all your answers! I've attacched a network diagram. It's a simple network. From NAS I can ping EoIP tunnel con AP 1. I can turn it all on L2TP. 1) Shall I have to set NAS as a L2TP server and WiFi interfaces on AP2 as L2TP client? 2) Shall I set L2TP interfaces on NAS as hotspot...

planetcaravan

Hi there, I'm using RouterOS 5.22 to serve a little hotspot network on an RB751G-2HnD. All my WiFi AP are connected to the RB751G-2HnD via EoIP tunnel. I've noticed that enabling hotspot on RB751G-2HnD all stations connected to the APs can't take an IP from RB751G-2HnD. As I shutdown the hotspot ser...

planetcaravan

Tool > Profile
Which section has the highest CPU usage?

Solved!
It was user manager. I disabled that package and CPU gone to 1%.

Thanks

planetcaravan

Hi there,

I'm using an RB1000 with RouterOS 5.22. As I turn on my RB, the CPU goes to 100%.
I've resetted all configurations twice but I'm still having the same problem
Look at the image I've attacched.

planetcaravan

I know it!
Does it possible that device wich know SSID could connect even SSID is hidden at this moment?

planetcaravan

Hi there,

I've set on "hidden" two SSID on two Groove but I've seen many connection with traffic.
I'm using Groove A2Hn connected to RB1100AH.

Why?

planetcaravan

Hi there, I'm using this code inside a script: { local wlan [len [interface wireless find]] if ($wlan<1) do={/system package disable wireless} } Inside the script, it return " syntax error " on the first character of "wlan". If I run this code OUTSIDE the main script, it returns ...

planetcaravan

Can somebody help me?

planetcaravan

any one... html for example

planetcaravan

GOT IT!
As my RB750GL doesn't have wireless package enabled, "wireless" command does not will be recognized!
I've enabled the package and all is working fine!

Thanks!

planetcaravan

How can I create a file and choose my extension?

planetcaravan

I'm using RouterOS 5.21 on a RB750GL.
Loot at the file attached. I've also inserted the line you suggested me.
It doesn't work fo me.
I've tried without this line

put [file get nuova.txt contents ]

but nothing's changing.

Look that, file already exists!

Search found 267 matches