Community discussions

MikroTik App

Search found 10 matches

by nzliam
Mon Aug 29, 2016 7:14 am
Forum: Forwarding Protocols
Topic: Packet loss on loopback / MPLS / VPLS interfaces only
Replies: 2
Views: 1098

Packet loss on loopback / MPLS / VPLS interfaces only

Hi, I have a strange problem; I have two routers both CCR1036, Router 1 running routeros v6.36.2, and Router 2 running routeros v6.35rc49. Configuration is as follows; Router 1, Interface VLAN 295, 172.16.200.1/30 Router 1, interface lobridge , 172.16.100.1/32 Router 2, Interface VLAN 295 172.16.200...
by nzliam
Thu Jun 30, 2016 10:33 am
Forum: Forwarding Protocols
Topic: ospf route filtering
Replies: 8
Views: 14287

Re: ospf route filtering

It sounds like you want your filters to allow anything that is a subset of 10.0.0.0/8 etc.... As written, your rules only allow EXACTLY those three prefixes. To each rule, add the criteria: prefix-length=0-32 (or if you're a perfectionist, make it 8-32 on the 10.0.0.0/8, and 12-32 on 172.16.0.0/12,...
by nzliam
Wed Jun 29, 2016 10:47 am
Forum: Forwarding Protocols
Topic: ospf route filtering
Replies: 8
Views: 14287

Re: ospf route filtering

Hi, Im am having a similar issue Flags: X - disabled   0   chain=ospf-out prefix=10.0.0.0/8 invert-match=no action=accept       set-bgp-prepend-path=""   1   chain=ospf-out prefix=172.16.0.0/12 invert-match=no action=accept       set-bgp-prepend-path=""   2   chain=ospf-out prefix=192.168.0.0/16 inv...
by nzliam
Wed Aug 22, 2012 2:52 pm
Forum: General
Topic: Newsletter 41: NEW PRODUCTS!
Replies: 64
Views: 26276

Re: Newsletter 41 NEW PRODUCTS!

We have also more expensive and higher power products. Actually I think we have products for every price range. If you can't find what you need, let us know what product you would want, and we will think how to make it. Rackmount RB2011 with SFP would be awesome. Or a simple half rack style bracket...
by nzliam
Wed Aug 22, 2012 2:37 pm
Forum: Forwarding Protocols
Topic: BGP Confederation - Not Accepting Routes
Replies: 8
Views: 3173

Re: BGP Confederation - Not Accepting Routes

Please post address list on your router. Do you mean the IP address list of the local interfaces? [admin@QS220-BGP1] > ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK INTERFACE 0 192.168.75.3/24 192.168.75.0 ether1 1 X 103.xxx.xxx.42/30 103.xxx.xxx.40 VLAN0234 2 103...
by nzliam
Wed Aug 22, 2012 2:30 pm
Forum: Forwarding Protocols
Topic: BGP Confederation - Not Accepting Routes
Replies: 8
Views: 3173

Re: BGP Confederation - Not Accepting Routes

Turning on multihop does make this error go away, and the full table is accepted, however this means that while all the routes (420k of the intl table) are installed into the local routing table, by default they are all unreachable as there is no route to the various nexthops without manually adding...
by nzliam
Wed Aug 22, 2012 2:02 pm
Forum: Forwarding Protocols
Topic: BGP Confederation - Not Accepting Routes
Replies: 8
Views: 3173

Re: BGP Confederation - Not Accepting Routes

Thanks, I'm getting the following error, Nexthop 202.xxx.xxx.1 is not on network shared with remote peer. However this IP address (nexthop 202.xxx.xxx.1) is one of the BGP peers of the router in the federation that we are peering with. The Mikrotik is AS 65502 and its Juniper neighbour we are peerin...
by nzliam
Tue Aug 21, 2012 1:37 pm
Forum: Forwarding Protocols
Topic: BGP Confederation - Not Accepting Routes
Replies: 8
Views: 3173

BGP Confederation - Not Accepting Routes

Hi, I have a BGP Confederation setup and working between two Juniper routers and want to add a Mikrotik to the mix. I have the Mikrotik talking to one of the Juniper's, and can see from the Juniper console that it has advertised a full table to the mikrotik (420k routes), however on the Mikrotik its...
by nzliam
Tue Sep 01, 2009 9:40 am
Forum: General
Topic: Destination NAT with PPP Connection
Replies: 4
Views: 1128

Re: Destination NAT with PPP Connection

Remove the src-port property from those rules and they should be fine.
I could remove that, however that will break my LAN's internet access.

Can I setup a PPP connection to DMZ to an IP instead?
by nzliam
Tue Sep 01, 2009 3:56 am
Forum: General
Topic: Destination NAT with PPP Connection
Replies: 4
Views: 1128

Destination NAT with PPP Connection

Hi, I'm trying to setup Destination NAT on a PPP interface. I have made the following rules however I dont beleive they are correct? [admin@MikroTik] /ip firewall nat> print Flags: X - disabled, I - invalid, D - dynamic 0 chain=srcnat action=masquerade out-interface=ppp-out1 1 chain=dstnat action=ac...