Community discussions

Search found 253 matches

by Myron
Sat Apr 30, 2011 4:06 pm
Forum: General
Topic: WEBPROXY 5.1 and aspx on ASUS.com ?
Replies: 3
Views: 790

Re: WEBPROXY 5.1 and aspx on ASUS.com ?

here too :)
by Myron
Mon Apr 25, 2011 12:19 pm
Forum: General
Topic: Why MikroTik Proxy make internet connection slow?
Replies: 4
Views: 1488

Re: Why MikroTik Proxy make internet connection slow?

come on? no help around here? because i already have 2 customers experience same problem.. :(
my suggestion setup a transparent squid proxy.
by Myron
Sat Apr 23, 2011 5:34 am
Forum: General
Topic: Strange connections on Hotspot/Active
Replies: 1
Views: 311

Re: Strange connections on Hotspot/Active

I could not figure out.I have a hotspot network running on 450g v5.1 rOS.My wireless access is not secure(I don't use password).Somebody is trying to gain access on my network with clonning mac addresses.I am not sure that my network is secure or not. Your advises? i think the client is connected t...
by Myron
Mon Apr 18, 2011 6:40 am
Forum: General
Topic: voip pass
Replies: 2
Views: 362

Re: voip pass

Bypass the MAC address of the phone in the Hotspot.
thank you fewi.
by Myron
Mon Apr 18, 2011 5:10 am
Forum: General
Topic: voip pass
Replies: 2
Views: 362

voip pass

hey guys need your help

i have 2 network office and hotspot now in office network i have a SIP server and then the wireless voip phone will be connect to hotspot how can i pass the sip port without authentication in hotspot?

thanks
by Myron
Fri Apr 15, 2011 3:41 pm
Forum: Beginner Basics
Topic: Linksys WRT160N Wireless-N Broadband Router
Replies: 13
Views: 1875

Re: Linksys WRT160N Wireless-N Broadband Router

i just want to create this session in my network. how to configure it as my wi-fi router? can i access internet from this router on my wi-fi devices like Laptop or mobiles? if you want your devices access login and password the mikrotik can control using hotspot. thanks yes i want this but how to d...
by Myron
Fri Apr 15, 2011 3:24 pm
Forum: Beginner Basics
Topic: Setup another hotspot but No Inernet
Replies: 2
Views: 418

Re: Setup another hotspot but No Inernet

HI I have mikrotik v4 with hotspot 1 lan and 1 wan pppoe now, i need to set up another hotspot with another lan card Lan2 I set up the second hotspot with another pool address the problem i can not get internet to the new hotspot!! some device is working and some is not!! the i change the new hotsp...
by Myron
Fri Apr 15, 2011 3:18 pm
Forum: Beginner Basics
Topic: Linksys WRT160N Wireless-N Broadband Router
Replies: 13
Views: 1875

Re: Linksys WRT160N Wireless-N Broadband Router

i just want to create this session in my network.
how to configure it as my wi-fi router? can i access internet from this router on my wi-fi devices like Laptop or mobiles?
if you want your devices access login and password the mikrotik can control using hotspot.

thanks
by Myron
Fri Apr 15, 2011 11:04 am
Forum: Beginner Basics
Topic: Linksys WRT160N Wireless-N Broadband Router
Replies: 13
Views: 1875

Re: Linksys WRT160N Wireless-N Broadband Router

just do as fewi said
aur aap lahore k kis area sy ho?
kuch sahi samajh nahi i mujhy fewi ki.
me from cantt.
where you from?
fewi is right, connect your linksys LAN to hub do not connect linksys WAN port and disable the dhcp server in linksys, also asign static ip of your linksys LAN.
by Myron
Wed Apr 13, 2011 7:56 am
Forum: Beginner Basics
Topic: remote access to printer
Replies: 3
Views: 834

Re: remote access to printer

Hi, I've been able to create remote access to pc's cameras and other devices behind a natted network/hotspot (RB750G) by using "bypass" mac rules with IP binding. and dst nat rules with "port forwarding". But, I cannot seem to enable "proper" remote access to a printer/scanner which saves documents...
by Myron
Mon Apr 11, 2011 2:58 pm
Forum: General
Topic: Creating VLAN??
Replies: 3
Views: 616

Re: Creating VLAN??

I want create VLAN on routerboard 750G. I ll put network cable on 1st port, and to 2nd and 3rd ports will be connected to different switches. And i want to share this connection (which is on 1st port) with 2nd and 3rd port. Could you please how to create this VLAN step by step. for example /interfa...
by Myron
Sun Apr 03, 2011 2:28 pm
Forum: General
Topic: RouterOS 5.0 is out!
Replies: 153
Views: 27216

Re: RouterOS 5.0 is out!

Then upgrade to 4.17 and you will from then on be able to upgrade to 5.0 :)

awwww okies :lol:

thanks!
by Myron
Sun Apr 03, 2011 1:25 pm
Forum: General
Topic: RouterOS 5.0 is out!
Replies: 153
Views: 27216

Re: RouterOS 5.0 is out!

Have you updated the licence to the new 8-digit format?

What is the output of
/system license print
heres the output

[myron@Kamote] /system license> print
software-id: "9CR1-V147"
upgradable-to: v4.x
nlevel: 5
features:
by Myron
Sat Apr 02, 2011 5:02 pm
Forum: General
Topic: RouterOS 5.0 is out!
Replies: 153
Views: 27216

Re: RouterOS 5.0 is out!

ohhh myyyy whats wrong? jan/01/1970 08:00:06 system,info verified user-manager-5.0-mipsbe.npk jan/01/2002 09:00:02 system,error license does not support new version of user-manager-5.0 jan/01/2002 09:00:02 system,info verified system-5.0-mipsbe.npk jan/01/2002 09:00:02 system,error license does not ...
by Myron
Sat Apr 02, 2011 4:47 pm
Forum: General
Topic: RouterOS 5.0 is out!
Replies: 153
Views: 27216

Re: RouterOS 5.0 is out!

hey guys

anyone here had an issue in RB450G after upgrading to version 5?

thanks
by Myron
Thu Mar 24, 2011 9:56 am
Forum: General
Topic: DSL and MIKROTIK MTU
Replies: 2
Views: 849

Re: DSL and MIKROTIK MTU

This depends on your DSL Provider and the MTU they give you. Typically, 1420-1440 works well, but if it is a true bridge DSL then 1500 should be fine. If it is a PPPoE session it would make a difference as well. the current situation is bridge mode and no ppoe session, ok will stick on 1500. thanks...
by Myron
Wed Mar 23, 2011 8:32 am
Forum: General
Topic: DSL and MIKROTIK MTU
Replies: 2
Views: 849

DSL and MIKROTIK MTU

hey guys

what is the best and accurate setting MTU my mikrotik behind DSL connection.

thanks
by Myron
Wed Mar 23, 2011 7:39 am
Forum: General
Topic: VPN help
Replies: 2
Views: 1262

Re: VPN help

Please specify your configration of /ppp server and /ppp client
also change your mrru=1600
anyway it works now i have just miss something in config, thanks
by Myron
Thu Mar 17, 2011 10:01 am
Forum: General
Topic: fail over help!
Replies: 3
Views: 481

Re: fail over help!

seth,

lots of people here are addicted in mikrotik in this room but without your network detail information no one can do magic for you, now post your configuration export it. maybe someone will do a trick for you :o

thanks
by Myron
Thu Mar 17, 2011 9:54 am
Forum: General
Topic: PPP profile limits
Replies: 0
Views: 396

PPP profile limits

hey guys

im just little bit confuse in ppp profile limits >>>> only one (default) is this single from client connection?

thanks
by Myron
Wed Mar 09, 2011 10:33 am
Forum: General
Topic: VPN help
Replies: 2
Views: 1262

VPN help

hey guys i have a problem in pptp can someone please help? this problem was occur only in 2nd branch office they cant connect. 16:27:32 pptp,ppp,debug,packet <180.190.221.10>: sent LCP ConfRej id=0x7 16:27:32 pptp,ppp,debug,packet <pcomp> 16:27:32 pptp,ppp,debug,packet <accomp> 16:27:36 pptp,ppp,deb...
by Myron
Tue Mar 08, 2011 6:19 am
Forum: General
Topic: FTP problem
Replies: 1
Views: 338

FTP problem

hi fewi

i have a problem client cant access FTP server if behind webproxy is there any treak to passtru FTP?

thanks
by Myron
Mon Mar 07, 2011 2:37 am
Forum: General
Topic: winbox
Replies: 2
Views: 426

Re: winbox

You're either not connected on layer 2, or turned off neighbor discovery on that interface on the router.

hehehe thanks fewi it works now i forgot to enable vlans interface in discovery interface

thanks
by Myron
Sun Mar 06, 2011 3:27 pm
Forum: General
Topic: winbox
Replies: 2
Views: 426

winbox

hey guys

before can auto detect mac address if i click the small box but now cant detect mac, what could be the problem?
by Myron
Sat Mar 05, 2011 8:15 am
Forum: General
Topic: Problem with Hotspot + Webproxy
Replies: 2
Views: 518

Re: Problem with Hotspot + Webproxy

Hello my friends, I`m using mikrotik V3.30, I use hotspot and is working fine, but when I setup webproxy it makes cache and works good and then the problem begins, my users can`t autenthicate with login and password when I activate the NAT rule that redirects to port 8080 (used by default by webpro...
by Myron
Thu Feb 24, 2011 9:41 am
Forum: General
Topic: how to stop getting dchp from outside
Replies: 1
Views: 399

how to stop getting dchp from outside

guys i found this problem happen this morning my vlan3 hotspot dhcp network is 192.168.3.0/24 but the problem is some of mac user getting 192.168.1.1 i think this is from outside or someone plug a router in my network if i trace this show 6 hops, and if i ping its reachable. i have also 192.168.1.0/...
by Myron
Mon Feb 21, 2011 9:44 am
Forum: General
Topic: backup line
Replies: 0
Views: 249

backup line

hello guys

i have two isp lines but the 2nd line is for backup only for example the line1 is the active gateway if this line1(isp1) down so the gateway route will go to 2ndline(isp2) and then if line1 is back online the connection will establish again, is there any guide or manual to do this?

thanks
by Myron
Tue Feb 15, 2011 9:12 am
Forum: RouterBOARD hardware
Topic: RB450G POE???
Replies: 3
Views: 1835

Re: RB450G POE???

thanks troy
by Myron
Tue Feb 15, 2011 8:18 am
Forum: RouterBOARD hardware
Topic: RB450G POE???
Replies: 3
Views: 1835

RB450G POE???

hello guys need your advice which port of RB450G has POE compliant??

thanks
by Myron
Mon Feb 14, 2011 7:20 am
Forum: General
Topic: how to block https://www.facebook.com
Replies: 23
Views: 34546

Re: how to block https://www.facebook.com

im totally agree with edified, the problem is web-proxy cannot block blocking facebook via https :( my co staff here at around 100 employees they have individual computers i dony want staff using facebook during office hours.

thanks
by Myron
Sun Feb 13, 2011 5:49 am
Forum: General
Topic: how to block https://www.facebook.com
Replies: 23
Views: 34546

Re: how to block https://www.facebook.com

in my case, users could use only my routerboard as dns (I blocked forward of port 53 from lan), then I inserted static dns entries like http://www.facebook.com > 127.0.0.1
hello rodolfo can you please give some example :)

thanks
by Myron
Thu Feb 10, 2011 4:06 am
Forum: General
Topic: how to block https://www.facebook.com
Replies: 23
Views: 34546

Re: how to block https://www.facebook.com

I haven't tried to do exactly what you are doing, but based on my previous experience perhaps you could substitute dst-host=https://facebook.com (leave out the www).

I admit my suggestion is only a guess.
ok i do try.
it doesnt work :)
by Myron
Thu Feb 10, 2011 4:03 am
Forum: General
Topic: how to block https://www.facebook.com
Replies: 23
Views: 34546

Re: how to block https://www.facebook.com

I haven't tried to do exactly what you are doing, but based on my previous experience perhaps you could substitute dst-host=https://facebook.com (leave out the www).

I admit my suggestion is only a guess.
ok i do try.
by Myron
Thu Feb 10, 2011 3:49 am
Forum: General
Topic: how to block https://www.facebook.com
Replies: 23
Views: 34546

Re: how to block https://www.facebook.com

I wasn't suggesting to use openDNS, just wondering if "https://facebook.com" makes any difference.
ahhh okey burley do you have any idea or trick to do this? im totally out of idea :(

thanks
by Myron
Thu Feb 10, 2011 3:40 am
Forum: General
Topic: how to block https://www.facebook.com
Replies: 23
Views: 34546

Re: how to block https://www.facebook.com

I think I have seen this before while using openDNS. "www.facebook.com" did not work but "facebook.com" did work. Perhaps it is the same for your setup. no burley i dont want to use opendns filtering i have my web-proxy works fine it can block facebook.com or www.facebook.com the only problem using...
by Myron
Thu Feb 10, 2011 3:27 am
Forum: General
Topic: destination net unreachable
Replies: 2
Views: 925

Re: destination net unreachable

post a traceroute to yahoo.com from your computer and a print from your mikrotik routing table how ever it looks like your DSL modem is disconnecting hello sariao i found out the problem is in the streaming one of staff here in the office using listen grooveshark thats my mikbox keep disconecting i...
by Myron
Wed Feb 09, 2011 11:09 am
Forum: General
Topic: how to block https://www.facebook.com
Replies: 23
Views: 34546

how to block https://www.facebook.com

hello guys blocking of https://www.facebook.com in web-proxy doesn't work only port 80 (http://www.facebook.com) can block, i try to block facebook dst-address=(facebook host ip) port=443 or dst-host=https://www.facebook.com doesn't work either. is there any trick to block this? you guys try to bloc...
by Myron
Tue Feb 08, 2011 4:01 am
Forum: Wireless Networking
Topic: multiple VLAN with single SSID?
Replies: 3
Views: 735

multiple VLAN with single SSID?

hey guys

It is possible multiple vlan and single SSID?

thanks
by Myron
Mon Feb 07, 2011 4:56 am
Forum: General
Topic: How create VLAN with mikrotik and linksys srw2024 switch?
Replies: 16
Views: 3646

Re: How create VLAN with mikrotik and linksys srw2024 switch

fewi and feklar it works now!! the problem is in the linksys switch you need to tagged the trunk port lol :lol: i think this is quit deffrent in cisco catalyst...
by Myron
Sun Feb 06, 2011 7:29 am
Forum: General
Topic: How create VLAN with mikrotik and linksys srw2024 switch?
Replies: 16
Views: 3646

Re: How create VLAN with mikrotik and linksys srw2024 switch

ahh sorry fewi it was enable before during my vlan testing.
by Myron
Sun Feb 06, 2011 6:38 am
Forum: General
Topic: How create VLAN with mikrotik and linksys srw2024 switch?
Replies: 16
Views: 3646

Re: How create VLAN with mikrotik and linksys srw2024 switch

Guys i have my Linksys SRW224G4 and support 802.1Q but im struggling this damn switch i create a trunk between mikrotik ether2 to linksys switch giga port 23 and the port 4 is the member of vlan 20 and my laptop coneected to this port as well the problem it doesn't give an IP coming from dhcp vlan 2...
by Myron
Sun Feb 06, 2011 6:24 am
Forum: General
Topic: How create VLAN with mikrotik and linksys srw2024 switch?
Replies: 16
Views: 3646

Re: How create VLAN with mikrotik and linksys srw2024 switch

Hi! Say I want to create VLAN2, VLAN3.... VLAN2 IP: 192.168.1.0/24 VLAN3 IP: 192.168.2.0/24 etc.. IS it possible to create VLAN with Mikrotik router OS v4.16 and Linksys SRW2024 Switch? If anyone know pls tell me the procedure. Azad mohamad as i check the specs of your Linksys SR2024 the only suppo...
by Myron
Tue Feb 01, 2011 9:46 am
Forum: General
Topic: Problem with ftp client in passive mode [pasv]
Replies: 3
Views: 2376

Re: Problem with ftp client in passive mode [pasv]

try this post by fewi

add action=accept chain=forward comment=FTP disabled=no dst-port=20,21 protocol=tcp
add action=accept chain=forward comment="" connection-state=established disabled=yes
add action=accept chain=forward comment="" connection-state=related disabled=yes

hope this help
by Myron
Mon Jan 31, 2011 9:54 am
Forum: General
Topic: VLAN interface + proxy-arp
Replies: 2
Views: 1881

Re: VLAN interface + proxy-arp

router deal with Vlans as interfaces so to enable vpn to pass to a VLAN you need to enable proxy-arp for this vlan
hi sariao thanks for response now i know what you mean my problem solved sorry to bother you guys, solved

thanks
by Myron
Mon Jan 31, 2011 7:12 am
Forum: General
Topic: VLAN interface + proxy-arp
Replies: 2
Views: 1881

VLAN interface + proxy-arp

Hello guys good morning to all I was planning to create a multiple Vlans example vlan10,20,30,40 and 50 in 1 interface now it come to my mind a little confuse, in my current RB setup i have ether1=wan then the rest all local port with different subnet now i have my vpn connected to ether2 which is t...
by Myron
Thu Jan 27, 2011 11:31 am
Forum: General
Topic: destination net unreachable
Replies: 2
Views: 925

destination net unreachable

Hello guys i notice 4 days from now if my router tx/rx huge traffic and i ping yahoo.com suddenly >> destination net unreachable it occurs only if the latency reach to 1,700+, my router connected to DSL modem its a MTU issue? Reply from 72.30.2.43: bytes=32 time=1588ms TTL=54 Reply from 72.30.2.43: ...
by Myron
Fri Jan 14, 2011 5:21 am
Forum: General
Topic: Router hangs or slow down!! please HELP!!
Replies: 3
Views: 889

Re: Router hangs or slow down!! please HELP!!

Hello, I manage an hotel hotspot which have a basic configuration: ppoe dsl--->mikrotik RB750 fw 4.16--->a few APs wired to the mikrotik. hotspot was configured using the wizard on winbox, and I use external AAA radius auth. Well I configured the mikrotik as hotspot (which is installed on office), ...
by Myron
Wed Jan 12, 2011 7:24 am
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 438
Views: 308389

Re: Sample Hotspot Page - Sticky Please

hi normis my simple hotspot page here in 7stones Boracay Resort. :D

http://s1198.photobucket.com/albums/aa4 ... otpage.jpg
by Myron
Tue Dec 28, 2010 2:42 pm
Forum: General
Topic: hotspot usermanager problem.
Replies: 6
Views: 2012

Re: hotspot usermanager problem.

I use my radius for the hotspot only, not for login. Don't know if that will affect the accounting. Let me know if it still doesn't work. If you haven't enabled the radius logging, that might help. /system logging add topics=radius action=memory Hello Tim The symptoms still persist :D in radius onl...
by Myron
Tue Dec 28, 2010 1:26 pm
Forum: General
Topic: hotspot usermanager problem.
Replies: 6
Views: 2012

Re: hotspot usermanager problem.

Have you tried setting the radius timeout to a larger value? /radius print detail set X timeout=600ms Change X to the line number of the radius entry (0 if you have only one entry). thanks tim, the current value is 300ms but i change now to 600ms will see what happen next :D i get back back you soo...
by Myron
Tue Dec 28, 2010 12:20 pm
Forum: General
Topic: hotspot usermanager problem.
Replies: 6
Views: 2012

Re: hotspot usermanager problem.

any help? :D
by Myron
Mon Dec 27, 2010 9:21 am
Forum: The User Manager
Topic: delete all logs?
Replies: 2
Views: 960

delete all logs?

Hello

Is there nay other way to delete all logs in usermanager instead deleting 1000 per page? i have 44000+ logs can someone give some tips or scripts in every 5 days all logs will be deleted.

Thanks
by Myron
Mon Dec 27, 2010 9:12 am
Forum: General
Topic: hotspot usermanager problem.
Replies: 6
Views: 2012

hotspot usermanager problem.

Hi fewi and the rest of mik team. i have some problem in this radius accounting log, before it works fine and client can login without this blue log but now a more than week i received this message radius accounting not sent: no response, but the client hotspot account can login. please check the sc...
by Myron
Fri Dec 24, 2010 3:40 pm
Forum: Beginner Basics
Topic: yahoo page
Replies: 3
Views: 534

Re: yahoo page

ok thanks i will try..
by Myron
Thu Dec 23, 2010 4:36 pm
Forum: General
Topic: Thank You / Merry Christmas
Replies: 3
Views: 530

Re: Thank You / Merry Christmas

Merry Christmas to all mikrotik addict :)

From Philippines
by Myron
Wed Dec 22, 2010 5:49 am
Forum: Beginner Basics
Topic: yahoo page
Replies: 3
Views: 534

yahoo page

hello all i have strange problem with yahoo page, all site are works fine except yahoo.com some sort of erratic behavior, the page doesn't load complete or even the pictures does not load only but you can read the character text. anyone experience this kind of problem? ps: my english is bad merry Ch...
by Myron
Fri Dec 17, 2010 9:36 am
Forum: Beginner Basics
Topic: 8am to 5 pm only
Replies: 2
Views: 629

8am to 5 pm only

Hi to all expert

Can you please share your idea how to make a script example my WAN port i want to start my connection at 8AM and off in 5PM.

Thanks to all and Merry Christmas
by Myron
Sat Dec 04, 2010 4:23 am
Forum: General
Topic: jumping to next gate?
Replies: 1
Views: 383

jumping to next gate?

Hello fewi if your there need some help here since im using mikrotik layer 3 router, because in ip/dhcp/network the gate is always .1 now my question is what if i use the 10.13.0.0/24 the gate is 10.12.0.1 and i dont use 10.13.0.1 gate so it possible the 10.13.0.0/24 can go outbound in internet? my ...
by Myron
Fri Dec 03, 2010 9:50 am
Forum: General
Topic: VPN Clients didn't get connected to the internet
Replies: 5
Views: 1405

Re: VPN Server Problems

Hello, i just Receiver my RB750g and i will use it only as a VPN Server so i could connect my iPhone or iPad from outside. Does anyone has a newbi Tutorial how to enable the VPN Server so that i could access? I could use ipsec or pptp or l2pt. The Router is behind an avm 7390vdsl Router which will ...
by Myron
Sat Nov 27, 2010 2:08 am
Forum: General
Topic: please help me...
Replies: 28
Views: 1584

Re: please help me...

Start Winbox. Login. Click on interfaces. Select ethernet tab. Double click on each interface. Set "master-port=none". Click "Apply". No typed entries at all. Is that not a gui interface? Let me know when you have done that. And normis is correct. This is a very complex piece of equipment. That is ...
by Myron
Wed Nov 24, 2010 2:27 am
Forum: General
Topic: please help me...
Replies: 28
Views: 1584

Re: please help me...

Hello

Everything is here http://wiki.mikrotik.com/wiki/Category:Manual hope this help

Thanks
by Myron
Sun Nov 14, 2010 12:32 pm
Forum: General
Topic: RB450G + ruckus AP
Replies: 2
Views: 1082

RB450G + ruckus AP

hello people im just want to know if somebody here tested this kind of setup the hotspot controller is mikrotik but the access point is ruckus?? need some advice guys i have my incoming project now proposing 6 building in different area and style like a resort hotel.

thanks
by Myron
Fri Nov 12, 2010 3:58 pm
Forum: Beginner Basics
Topic: Mikromade
Replies: 4
Views: 1835

Mikromade

hi guys i saw this in youtube what the hell mikromade is this hehe :D cool utility http://www.youtube.com/watch?v=3ItXkNetREc
by Myron
Thu Nov 04, 2010 3:02 am
Forum: General
Topic: Firewall rule
Replies: 18
Views: 3555

Re: Firewall rule

the new version of bittorent doesn't block :shock:
by Myron
Wed Oct 27, 2010 9:00 am
Forum: General
Topic: New to MikroTik. VPN Help.
Replies: 7
Views: 1222

Re: New to MikroTik. VPN Help.

I just bought a RB450G last week and am now playing with it. So far I have gotten PTTP to work through tutorials on the internet. I can get my clients (built-in Windows client) and they can ping the router and the clients within the network behind the RB, but the clients behind the RB can't ping th...
by Myron
Wed Oct 27, 2010 6:58 am
Forum: Beginner Basics
Topic: Different dns servers
Replies: 2
Views: 1892

Re: Different dns servers

Sure. Destination NAT can do that. Let's say the office network behind the ether2 interface is to use a DNS server at 1.1.1.1 and the engineering department behind the ether4 interface is to use a DNS server at 2.2.2.2. /ip firewall nat add chain=dstnat in-interface=ether2 protocol=udp dst-port=53 ...
by Myron
Wed Oct 27, 2010 6:43 am
Forum: Beginner Basics
Topic: Different dns servers
Replies: 2
Views: 1892

Different dns servers

Hello fewi :) i have some concern and question it is possible to point different dns servers. example, my RB450 has 5 ether port let say in ether2 (office network) >>> dst addrs to google dns and ether3 (engineering dept) >>> dst addrs to ultra dns. my concern is i want to divide specific port to bl...
by Myron
Wed Oct 27, 2010 5:15 am
Forum: General
Topic: IPSec tunnel issue
Replies: 3
Views: 1755

Re: IPSec tunnel issue

I have set up several VPNs between MT RB750G devices. Only one of them is giving me some difficulty. The problem is that the tunnel works as long as you're passing traffic from one side to the other. After a period amount of idle time where no traffic is being passed, the connection drops. The only...
by Myron
Tue Oct 26, 2010 6:41 am
Forum: General
Topic: Bandwidth priorities and simple queues
Replies: 35
Views: 5596

Re: Bandwidth priorities and simple queues

Here is the basic queue tree I have set up at home. Modify it to match your bandwidth and packet mark needs. Your LAN(s) is going to be the Download portion of the queue and the WAN(s) is the upload. You'll need a queue for each WAN(s)/LAN(s) to segment it the way you want to. /queue tree add burst...
by Myron
Tue Oct 26, 2010 3:31 am
Forum: General
Topic: Bandwidth priorities and simple queues
Replies: 35
Views: 5596

Re: Bandwidth priorities and simple queues

Yup, capped it around 13M instead of 15M. Getting around 1.4-1.5MB/s instead of 1.5-1.6MB/s. Its worth trading up some speed for this kind of manageability though.

Thanks again for all your help! :)
hi ganniii would you mind to share your queue tree :)

thanks
by Myron
Fri Oct 22, 2010 4:11 pm
Forum: Beginner Basics
Topic: VPN bonding
Replies: 1
Views: 733

VPN bonding

Hey guys seems looks interesting this features a VPN bonding and mikrotik can do this?. and anyone have tested this kind of setup?

thanks
by Myron
Fri Oct 15, 2010 5:51 am
Forum: General
Topic: site to site pptp vpn
Replies: 3
Views: 1660

Re: site to site pptp vpn

yeah fewi your probably correct i have strong feeling this client machine blocking the icmp request they are using windows 7, even i tried L2TP and configure properly but same issue, im going to investigate this issue and i get back to you soon fewi. thanks fewi the problem solved now some of there...
by Myron
Fri Oct 15, 2010 3:35 am
Forum: General
Topic: site to site pptp vpn
Replies: 3
Views: 1660

Re: site to site pptp vpn

yeah fewi your probably correct i have strong feeling this client machine blocking the icmp request they are using windows 7, even i tried L2TP and configure properly but same issue, im going to investigate this issue and i get back to you soon fewi.

thanks
by Myron
Thu Oct 14, 2010 10:25 am
Forum: General
Topic: site to site pptp vpn
Replies: 3
Views: 1660

site to site pptp vpn

Hello fewi i have site to site VPN and both connected. the problem is from apps server side cant ping to client pc ip 192.168.5.10 . but from client pc to apps server 192.168.1.100 ping work fine even the tunnel ip can ping too, i add route both to local IP to reach both local, there is something ms...
by Myron
Thu Oct 14, 2010 9:00 am
Forum: Beginner Basics
Topic: New in Mikrotik
Replies: 2
Views: 546

Re: New in Mikrotik

Hi im new in the hardware of mikrotik.
Actually i have a routerboard 411U and i dont now how to connect to it to configure.

How can i do that???


Thanks
http://www.mikrotik.com/testdocs/ros/2. ... /basic.php
by Myron
Thu Oct 14, 2010 2:27 am
Forum: Beginner Basics
Topic: Site 2 Site VPN from RB to other Router (Routing problem)
Replies: 2
Views: 1278

Re: Site 2 Site VPN from RB to other Router (Routing problem

Hi I have tried to configure a VPN from my RB450G v4.11 to a Trustgate 160 Firewall using this guide witch is for a Zywall and have just changed the required configurations so that the matched in moth ends. http://www.potato-people.com/blog/2009/10/ipsec-vpns-for-mikrotik-routeros/ The Tunnel is up...
by Myron
Wed Oct 13, 2010 5:46 pm
Forum: Beginner Basics
Topic: RB750G cpu issue
Replies: 5
Views: 905

Re: RB750G cpu issue

you still need to reboot it to apply this setting permanently
thanks normis for the assistance.

cheers
by Myron
Wed Oct 13, 2010 10:48 am
Forum: Beginner Basics
Topic: RB750G cpu issue
Replies: 5
Views: 905

Re: RB750G cpu issue

normis it seems the cpu seeting is change now :) but the box not yet rebooted [paradisegarden@ParadiseGarden Manila] /system routerboard settings> set cpu-frequency=680 [paradisegarden@ParadiseGarden Manila] /system routerboard settings> print boot-device: nand-if-fail-then-ethernet cpu-frequency: 6...
by Myron
Wed Oct 13, 2010 9:39 am
Forum: Beginner Basics
Topic: RB750G cpu issue
Replies: 5
Views: 905

Re: RB750G cpu issue

Hello Normis

Support Ticket#2010101366000127

thanks
by Myron
Tue Oct 12, 2010 10:14 am
Forum: Beginner Basics
Topic: RB750G cpu issue
Replies: 5
Views: 905

RB750G cpu issue

hey guys i have my new 2 same rb750g the other one shows 400mhz only, this could be 680Mhz right? ][paradisegarden@ParadiseGarden Manila] /system routerboard> print routerboard: yes model: "750G" serial-number: "xxxxxxxxxxxx" current-firmware: "2.27" upgrade-firmware: "2.27" [paradisegarden@Paradise...
by Myron
Mon Oct 11, 2010 5:42 pm
Forum: Beginner Basics
Topic: proxying specific time
Replies: 4
Views: 684

Re: proxying specific time

You could create two scripts, one to disable, and one to enable. /system script add name="EnableWebProxy" source="/ip proxy set enabled=yes" /system script add name="DisableWebProxy" source="/ip proxy set enabled=no" Then you could schedule these scripts to run at specific times: This will disable ...
by Myron
Mon Oct 11, 2010 12:12 pm
Forum: General
Topic: "web proxy"
Replies: 2
Views: 1009

Re: "web proxy"

I am using router os 3.3. The router is NATed to external public address and there is also a IP tunnel through which all our local IP gets internet access.Now i would like to configure HTTP proxy in the router.I followed following steps 1.Enabled HTTP proxy. The settings are enabled: yes src-addres...
by Myron
Mon Oct 11, 2010 6:12 am
Forum: Beginner Basics
Topic: proxying specific time
Replies: 4
Views: 684

Re: proxying specific time

You could use a NAT rule to redirect to proxy at specific times. In your case, you could try something like this: /ip firewall nat add chain=dstnat protocol=tcp dst-port=80 time=08:00:00-17:00:00,fri,mon,sat,sun,thu,tue,wed action=accept /ip firewall nat add chain=dstnat protocol=tcp dst-port=80 ac...
by Myron
Mon Oct 11, 2010 6:10 am
Forum: Beginner Basics
Topic: proxying specific time
Replies: 2
Views: 330

Re: proxying specific time

Hello people

I have my web-proxy and it works fine, it posible set a specific time? example 8AM to 5PM proxy is close.

thanks
Hi sorry admin for double post accidentally.
by Myron
Mon Oct 11, 2010 6:08 am
Forum: Beginner Basics
Topic: proxying specific time
Replies: 2
Views: 330

proxying specific time

Hello people

I have my web-proxy and it works fine, it posible set a specific time? example 8AM to 5PM proxy is close.

thanks
by Myron
Mon Oct 11, 2010 4:54 am
Forum: Beginner Basics
Topic: proxying specific time
Replies: 4
Views: 684

proxying specific time

Hello people

I have my web-proxy and it works fine, it posible set a specific time? example 8AM to 5PM proxy is close.

thanks
by Myron
Wed Oct 06, 2010 5:20 pm
Forum: General
Topic: Mikrotik Hotspot with Hotels Software Integration
Replies: 2
Views: 1656

Re: Mikrotik Hotspot with Hotels Software Integration

Mikrotik Hotspot Hotel Software Integration with the Web Interface.Mikrotik antennas available to guests in hotels and Internet service fees paid automatically adds the guest account, if necessary, to mention a web interface.Normally go to the reception guests can purchase Internet card on the card...
by Myron
Sun Oct 03, 2010 3:35 pm
Forum: Beginner Basics
Topic: how to forward?
Replies: 8
Views: 1187

Re: how to forward?

As an example, I will use 10.0.0.1/24 assigned to the interface on 1stRouter that is connected to the 2ndRouter. 2ndRouter is assigned 10.0.0.2/24 on the wan interface (connected to 1stRouter), and 192.168.0.1/24 on its lan interface (connected to the sip server). The sip server is assigned 192.168...
by Myron
Sun Oct 03, 2010 1:36 pm
Forum: Beginner Basics
Topic: how to forward?
Replies: 8
Views: 1187

how to forward?

hello everyone can someone gv some sample idea how to forward port in the second router let say ex. i have 2 routers both router has src-nat, i know how to redirect port but my question what if two router connected and has both masquerade src-nat and the sip server is in the second router connected....
by Myron
Wed Sep 29, 2010 3:08 am
Forum: Beginner Basics
Topic: Shaping traffic
Replies: 2
Views: 701

Re: Shaping traffic

Queuing is where you need to be. Traffic Control is where all the Top Jobs are because it can be incredibly complicated. You should start with Queue Trees, and remember that the Queue only acts on Outgoing Traffic through an interface. MT confuses it a bit by using an Intermediate Queuing device (I...
by Myron
Tue Sep 28, 2010 2:39 pm
Forum: Beginner Basics
Topic: ethernet bonding
Replies: 5
Views: 1087

Re: ethernet bonding

Hi. i am new to the forum, someone pointed to mikrotik to find a solution for my issue. in my office we do have 2 adsl connections from different isps. Each of the connection needs its own router to work since it is mac address locked from isp. at the moment router A has ip address 192.168.1.1/24 a...
by Myron
Mon Sep 27, 2010 11:05 am
Forum: Beginner Basics
Topic: multiple PCs sharing single connection & hotspot IP binding
Replies: 3
Views: 612

Re: multiple PCs sharing single connection & hotspot IP bind

Hi All, I have multiple PCs sharing a single wifi connection (connected to an 8 port switch) . I have tried IP binding to allow 2 PCs bypass mikrotik log in page. I was wondering why it doesn't allow me to IP bind 2 PCs at the same time. Any ideas? try to bypass client MAC thanks Thanks a lot, mara...
by Myron
Mon Sep 27, 2010 6:50 am
Forum: Beginner Basics
Topic: multiple PCs sharing single connection & hotspot IP binding
Replies: 3
Views: 612

Re: multiple PCs sharing single connection & hotspot IP bind

Hi All,

I have multiple PCs sharing a single wifi connection (connected to an 8 port switch) . I have tried IP binding to allow 2 PCs bypass mikrotik log in page. I was wondering why it doesn't allow me to IP bind 2 PCs at the same time.

Any ideas?
try to bypass client MAC

thanks
by Myron
Thu Sep 23, 2010 5:41 am
Forum: General
Topic: double ip in tracert
Replies: 5
Views: 1514

Re: double ip in tracert

ahhhhhh those double ip its appear only if im behind nanostation PTP(station ------- CPE), i came this morning at the office i connect my laptop direct to a switch its show 1 only :) C:\Users\Kamote>tracert yahoo.com Tracing route to yahoo.com [67.195.160.76] over a maximum of 30 hops: 1 1 ms 1 ms 1...
by Myron
Thu Sep 23, 2010 5:29 am
Forum: General
Topic: double ip in tracert
Replies: 5
Views: 1514

Re: double ip in tracert

do you use Hotspot? also, post your /ip route print detail and /ip firewall nat print yup chupaka i have hotspot in ether4 /ip firewall nat add action=masquerade chain=srcnat comment=NAT disabled=yes out-interface=Ether1-WAN add action=masquerade chain=srcnat comment="10.2.2 NAT" disabled=no src-ad...
by Myron
Thu Sep 23, 2010 3:03 am
Forum: General
Topic: double ip in tracert
Replies: 5
Views: 1514

Re: double ip in tracert

what should be your next hop after 10.11.0.1? hello chupaka this is the ip addresses in every port, my linksys switch connected to ether3 and the switch has no vlan only native setup /ip address add address=10.11.0.1/24 broadcast=10.11.0.255 comment="Office Network" disabled=no interface=ether3-loc...
by Myron
Wed Sep 22, 2010 7:17 pm
Forum: General
Topic: double ip in tracert
Replies: 5
Views: 1514

double ip in tracert

hi to all gurus in my rb450g ether1=wan, ether2=servers, ether3=office_local (10.11.0.0/24), ether4=hotspot, im just wondering why my local ip shows double in windows tracert did i miss something wrong? c:\Users\Kamote>tracert yahoo.com Tracing route to yahoo.com [69.147.125.65] over a maximum of 30...
by Myron
Sat Sep 18, 2010 7:32 am
Forum: Beginner Basics
Topic: FTP
Replies: 2
Views: 481

Re: FTP

You can easily work around all of that by accepting packets that have a connection-state of 'related' and 'established' very high up in the ruleset (probably as the first two rules), and ensuring that the FTP helper is enabled under "/ip firewall service-port". The firewall has helpers that can ins...
by Myron
Sat Sep 18, 2010 6:17 am
Forum: Beginner Basics
Topic: FTP
Replies: 2
Views: 481

FTP

hello guys i notice some of FTP server doesn't open port 21, i have my drop rules and port 21 accept rules place before drop rules so meaning my port 21 can pass, my doubt is some of ftp server use port 21 as a dummy then change to any port before ftp establish connection? anyone have an idea? thanks
by Myron
Wed Sep 15, 2010 10:31 am
Forum: Beginner Basics
Topic: excemted in firewalls
Replies: 6
Views: 783

Re: excemted in firewalls

Above the rules you already have, put /ip firewall filter add chain=prerouting in-interface=ether3 action=accept add chain=forward out-interface=ether3 action=accept It should be: /ip firewall filter add chain=forward in-interface=ether3 action=accept add chain=forward out-interface=ether3 action=a...
by Myron
Wed Sep 15, 2010 7:54 am
Forum: Beginner Basics
Topic: excemted in firewalls
Replies: 6
Views: 783

Re: excemted in firewalls

Above the rules you already have, put /ip firewall filter add chain=prerouting in-interface=ether3 action=accept add chain=forward out-interface=ether3 action=accept hello fewi in ip/filter theres is no prerouting in chain correct me if i mistaken /ip firewall filter add chain=prerouting in-interfa...
by Myron
Wed Sep 15, 2010 4:53 am
Forum: Beginner Basics
Topic: excemted in firewalls
Replies: 6
Views: 783

Re: excemted in firewalls

Yes. The easiest way is probably to put a rule at the top that accepts all traffic in and out ether3.
ahhhh fewi can you please give some little bit example :)

thanks fewi
by Myron
Wed Sep 15, 2010 3:26 am
Forum: Beginner Basics
Topic: excemted in firewalls
Replies: 6
Views: 783

excemted in firewalls

hey guys i have a question let say i have 3 ether ports in my rb and i have my rules settings in firewalls ex. ether1=isp ether2=local ether3=hotspot, now it is possible the ether3=hotspot is excemted in firewall only the ether2=local has rules in firewall?

thanks
by Myron
Tue Sep 14, 2010 2:01 pm
Forum: The User Manager
Topic: How to block movie downloads on one interface of a RB
Replies: 3
Views: 2297

Re: How to block movie downloads on one interface of a RB

Hi, I would like to know how can i block movies download, in just one interface of a mikrotik RB. Thanks. use mikrotik web-proxy for specific port something like this action=redirect chain=dstnat comment="web proxy allow to ether2 " disabled=no dst-port=80 in-interface=\ ether2-local protocol=tcp t...
by Myron
Tue Sep 14, 2010 8:32 am
Forum: The User Manager
Topic: how to reset??
Replies: 1
Views: 745

how to reset??

hey guys need help here how to reset usermanager password?

thanks
by Myron
Wed Sep 01, 2010 9:28 am
Forum: Beginner Basics
Topic: 2 vlans can communicate
Replies: 4
Views: 711

Re: 2 vlans can communicate

if you want both vlans into the same broadcast domain then, yes, bridge them together.
wow thanks mrz for information u share :D
by Myron
Wed Sep 01, 2010 8:55 am
Forum: Beginner Basics
Topic: 2 vlans can communicate
Replies: 4
Views: 711

2 vlans can communicate

hi fewi i have my noobish question since i have no network certificate or proper training but im learning with my own self readings some forums etc etc now my question is how to communicate VLAN1 to VLAN2 ?? or need to bridge both vlans?? as my understanding VLAN can segregates broadcast domains :D ...
by Myron
Mon Aug 23, 2010 9:42 am
Forum: General
Topic: EoIP Help. Basics??
Replies: 11
Views: 1256

Re: EoIP Help. Basics??

once you establish eoip tunnel then try to add local route of your eoip, mine work fine without any issue

hope this help
by Myron
Fri Aug 13, 2010 11:14 am
Forum: Beginner Basics
Topic: Queue for target mac address
Replies: 7
Views: 7178

Re: Queue for target mac address

2 ;;; mark rudnicki router chain=prerouting action=mark-connection new-connection-mark=mark_rudnicki_router passthrough=yes src-address-list=00:11:6B:19:BC:A9 3 chain=prerouting action=mark-packet new-packet-mark=mark_router_levelone passthrough=yes connection-mark=mark_rudnicki_router You're marki...
by Myron
Fri Aug 13, 2010 6:49 am
Forum: Beginner Basics
Topic: Hotel bandwidth management
Replies: 4
Views: 2137

Re: Hotel bandwidth management

hello jim

i setup resort network too (http://www.seawindresort.net/) one of my client here in the island running 750g + hotspot + usermanager(limit, max, burst etc) + radius and 10 picostation AP's so far so good work like a charm. :D
by Myron
Fri Aug 13, 2010 4:10 am
Forum: Beginner Basics
Topic: Queue for target mac address
Replies: 7
Views: 7178

Re: Queue for target mac address

In a mangle chain that happens before queues (prerouting?) mark the packets based on MAC address and fire the queue based on packet marks. helo fewi i tried to mark the packets base on mac address but the packets doesn't moving, where did i wrong this config? actually this client mac address is und...
by Myron
Thu Aug 12, 2010 6:26 pm
Forum: Beginner Basics
Topic: VPN Server configuration problem.
Replies: 1
Views: 712

Re: VPN Server configuration problem.

Hi to all, I am trying for days to setup a VPN server on Mikrotik RB433. I have succeeded to create the VPN server but I cannot make it work correctly. What I mean is: I have the DSL router connected on ether1 with static ip 10.x.x.10 / 27 I gave to the vpn server local-address 10.x.x.14 I gave to ...
by Myron
Tue Aug 10, 2010 7:05 pm
Forum: General
Topic: [solved] pptp client disconnected every 10 minutes
Replies: 5
Views: 3237

Re: pptp client disconnected every 10 minutes

hello chupaka ive notice this day my IPSEC shows expires ipsec-SA expires: ESP/Tunnel and then after few minutes initiates new phase 2 negotiation im using both 4.10 ROS,. or some sort of bug??

thanks
by Myron
Sat Aug 07, 2010 10:22 am
Forum: Beginner Basics
Topic: VPN
Replies: 4
Views: 568

Re: VPN

when i want to try connect vpn from windows machine to mikrtik error comes
post your ppp configuration jani.
by Myron
Fri Aug 06, 2010 12:16 pm
Forum: Beginner Basics
Topic: Queue for target mac address
Replies: 7
Views: 7178

Re: Queue for target mac address

Ok. can anyone tell me how to set queue for a target ip address? heres my simple example a target ip add burst-limit=1M/2M burst-threshold=256k/256k burst-time=15s/15s comment="" direction=both \ disabled=yes dst-address=0.0.0.0/0 interface=all limit-at=0/0 max-limit=256k/786k name=\ "office queue"...
by Myron
Fri Aug 06, 2010 10:11 am
Forum: Beginner Basics
Topic: Queue for target mac address
Replies: 7
Views: 7178

Re: Queue for target mac address

i think is not possible, i wanted that too limiting queue in target mac... matbe some of mik user here has an idea if possible hehe :)
by Myron
Thu Aug 05, 2010 5:24 pm
Forum: Beginner Basics
Topic: certificate between two routers
Replies: 3
Views: 600

Re: certificate between two routers

http://wiki.mikrotik.com/wiki/Manual:Create_Certificates That should work well for OpenVPN. hello fewi thanks for your quick response i have newly created certificates i saw in /file what is the meaning of request.pem and key.pem? to be honest this is my first setup of certificate hope you understa...
by Myron
Thu Aug 05, 2010 12:01 pm
Forum: Beginner Basics
Topic: certificate between two routers
Replies: 3
Views: 600

certificate between two routers

hi guys

is there any basic guide how to negotiate certificate between 2 router i have my IPSEC runs works well but in preshared key only, is there any step by step guide create certificate in every router.

thank you
by Myron
Thu Aug 05, 2010 5:42 am
Forum: Beginner Basics
Topic: Basic Mikrotik Training Videos - FREE - *Update 03/15/2010*
Replies: 62
Views: 32908

Re: Basic Mikrotik Training Videos - FREE - *Update 03/15/20

I don't see how IPIP over IPSec makes any sense to use. One of IPSec's drawbacks is that it can only encapsulate unicast packets, which means that you cannot send broadcasts or multicasts over IPSec tunnels. Many routing protocols require multicast packets, and many other applications require broad...
by Myron
Wed Aug 04, 2010 5:55 pm
Forum: Beginner Basics
Topic: Basic Mikrotik Training Videos - FREE - *Update 03/15/2010*
Replies: 62
Views: 32908

Re: Basic Mikrotik Training Videos - FREE - *Update 03/15/20

hi gregg thanks for your videos and guidelines and i learn a lot your the man gregg :D :D , my IPSEC works fine without any issue, now my question is what is the defrence between ipsec and ipsec+ipip tunnel? which more secure and more stable?

thanks
by Myron
Sat Jul 31, 2010 8:59 pm
Forum: Beginner Basics
Topic: exploiting 8080
Replies: 10
Views: 1272

Re: exploiting 8080

hi guys i have my web proxy using 8080 port ive notice there is someone from outside using and exploiting my 8080 port i saw in torch at WAN port and in graph the upstream and downstream is same figure and also consuming upload and download, i decided to change any port and it solved my problem, yo...
by Myron
Sat Jul 31, 2010 8:55 pm
Forum: Beginner Basics
Topic: exploiting 8080
Replies: 10
Views: 1272

Re: exploiting 8080

hehehe thanks hrvojie those proxyer cannot penetrate and it solved my problem my connection is back to normal :D

thanks
by Myron
Sat Jul 31, 2010 8:54 am
Forum: Beginner Basics
Topic: exploiting 8080
Replies: 10
Views: 1272

Re: exploiting 8080

/ip firewall filter
add action=drop chain=input disabled=no dst-port=8080 in-interface=internet \
protocol=tcp

internet = your wan interface
dst=port or src=port?

thanks
by Myron
Sat Jul 31, 2010 8:52 am
Forum: Beginner Basics
Topic: exploiting 8080
Replies: 10
Views: 1272

Re: exploiting 8080

/ip firewall filter
add action=drop chain=input disabled=no dst-port=8080 in-interface=internet \
protocol=tcp

internet = your wan interface
wow thanks bro!!
by Myron
Sat Jul 31, 2010 7:42 am
Forum: Beginner Basics
Topic: exploiting 8080
Replies: 10
Views: 1272

exploiting 8080

hi guys i have my web proxy using 8080 port ive notice there is someone from outside using and exploiting my 8080 port i saw in torch at WAN port and in graph the upstream and downstream is same figure and also consuming upload and download, i decided to change any port and it solved my problem, you...
by Myron
Thu Jul 29, 2010 4:30 pm
Forum: Beginner Basics
Topic: need advice/suggestion for VPN????
Replies: 8
Views: 876

Re: need advice/suggestion for VPN????

fewi i did a several test and comparing site to site vpn pptp and l2tp ive noticed the l2tp was very stable and low latency compare to pptp :D :D
by Myron
Fri Jul 23, 2010 6:07 am
Forum: Beginner Basics
Topic: NETMAP
Replies: 7
Views: 19941

Re: NETMAP

i saw the packets count in both netmap but the problem is from outside the ip xxx.xx.xxx.203 doesnt reply, i put 10.11.0.10 in laptop and i ping the xxx.xx.xxx.203 it work and reply im wondering this, can you please explain more bit blake hehe Can you post the output of '/ip firewall filter export'...
by Myron
Fri Jul 23, 2010 5:07 am
Forum: Beginner Basics
Topic: NETMAP
Replies: 7
Views: 19941

Re: NETMAP

Hi, I was able to get this working. /ip firewall nat add chain=dstnat action=netmap dst-address=192.0.2.20 to-addresses=10.1.50.254 place-before=0 add chain=srcnat action=netmap src-address=10.1.50.254 to-addresses=192.0.2.20 place-before=0 Do you have another rule which may be matching before the ...
by Myron
Thu Jul 22, 2010 12:14 pm
Forum: Beginner Basics
Topic: NETMAP
Replies: 7
Views: 19941

Re: NETMAP

Hi, I was able to get this working. /ip firewall nat add chain=dstnat action=netmap dst-address=192.0.2.20 to-addresses=10.1.50.254 place-before=0 add chain=srcnat action=netmap src-address=10.1.50.254 to-addresses=192.0.2.20 place-before=0 Do you have another rule which may be matching before the ...
by Myron
Thu Jul 22, 2010 10:34 am
Forum: Beginner Basics
Topic: NETMAP
Replies: 7
Views: 19941

NETMAP

hi FEWI need some help :) i have my 3 public ip's the two xxx.xx.xxx.xx1 and 2 is currently use and the 3rd ip is available now im trying to netmap but it doest work did i miss something i follow this guide http://wiki.mikrotik.com/wiki/Manual:IP/Firewall/NAT my laptop is connected to ether3 subnet ...
by Myron
Fri Jul 16, 2010 11:35 am
Forum: Beginner Basics
Topic: PCC can do this??
Replies: 1
Views: 429

PCC can do this??

hi guys found this site but its really cool WAN balance + VPN failover
Site-to-Site VPN Sub-Second Session Failover
http://www.peplink.com/index.php?view=f ... 88&path=34
so guys PCC has capabilities to do this?

thanks
by Myron
Thu Jul 15, 2010 4:14 pm
Forum: Beginner Basics
Topic: need advice/suggestion for VPN????
Replies: 8
Views: 876

Re: need advice/suggestion for VPN????

L2TP by itself is not secure at all.
thanks fewi for quick response :D i have some question sstp is available in 4.10?

thanks in advance
by Myron
Thu Jul 15, 2010 3:56 pm
Forum: Beginner Basics
Topic: need advice/suggestion for VPN????
Replies: 8
Views: 876

Re: need advice/suggestion for VPN????

EoIP and pptp are unsecure. Best bet is SSTP or IPSec. Ipsec requires a lot of resources for encryption so IMHO SSTP is better. hi mr mrz how about L2TP stable and more secure too? another thing im trying to use sstp in service but does not shows only pptp, l2tp, async, ppoe and openvpn available i...
by Myron
Mon Jul 12, 2010 8:55 am
Forum: General
Topic: L2TP client side problem
Replies: 1
Views: 582

Re: L2TP client side problem

hey guy good day to all i test L2TP tunnel this morning and both router connected the problem is the pc client connected to remote-office i cant ping the home-office(mik1) local server but if i use ping tools in remote-office(mik2) ping is reachable, i did something wrong? or i will add routes in r...
by Myron
Mon Jul 12, 2010 4:01 am
Forum: General
Topic: L2TP client side problem
Replies: 1
Views: 582

L2TP client side problem

hey guy good day to all i test L2TP tunnel this morning and both router connected the problem is the pc client connected to remote-office i cant ping the home-office(mik1) local server but if i use ping tools in remote-office(mik2) ping is reachable, i did something wrong? or i will add routes in ro...
by Myron
Sun Jul 11, 2010 4:46 pm
Forum: General
Topic: battling with limewire :))
Replies: 4
Views: 634

Re: battling with limewire :))

I think Butch's script catches Limewire from the number of open connections. should be easy for someone to recommend something like that or go to http://www.butchevans.com I'll take that back: just tested it and it does not pick up Limewire but it does pick up Vuze right away. thanks for reply wis,...
by Myron
Sun Jul 11, 2010 8:47 am
Forum: General
Topic: battling with limewire :))
Replies: 4
Views: 634

battling with limewire :))

heloo people

all p2p block except limewire how can we block this? i doubt that this limewire using encrypted p2p data, it is possible to block in web-proxy? can anyone give some tips :)

thanks
by Myron
Wed Jul 07, 2010 10:11 am
Forum: General
Topic: Mikrotik Management for iPhone Available Now
Replies: 141
Views: 28406

Re: Mikrotik Management from iPhone (soon)

how about in blackberry?
by Myron
Wed Jul 07, 2010 9:39 am
Forum: Beginner Basics
Topic: license expired
Replies: 2
Views: 645

Re: license expired

Since I didn't register the license after upgrading the RouterOS, the license has expired and need to be reinstalled. :? But how to install the RouterOS again without the winbox? Or does any other thing I need to do to recovery my RouterBOARD? Thanks a lot. :) i think you need to install via netins...
by Myron
Tue Jun 29, 2010 8:47 am
Forum: General
Topic: VLAN tagging
Replies: 1
Views: 495

VLAN tagging

hi to all gurus the default ip of switch is 192.168.1.2 and the rest of the port is belong to default vlan and the port 1 is trunk connected to mik ether2, i try several testing but no success, i have my layer2 switch has mane=vlan1 VLAN-id=10 and the port 6, 7, 8 belong to this vlan if i try to con...
by Myron
Tue Jun 29, 2010 6:39 am
Forum: Beginner Basics
Topic: Mikrotik RB450G + 4 networks + bridge and dhcp help
Replies: 4
Views: 1719

Re: Mikrotik RB450G + 4 networks + bridge and dhcp help

add routes
hi bafh can you please give some example how to route hehe

thanks
by Myron
Mon Jun 21, 2010 3:59 am
Forum: General
Topic: no hits..
Replies: 4
Views: 565

Re: no hits..

3.30 or 3.0? Theres a massive difference.
ahhh sori for misposting, 3.30 i mean pada but the webproxy is working fine my only concern is the hits i have no idea is this normal or not? :D

thanks pads
by Myron
Sat Jun 19, 2010 3:01 pm
Forum: General
Topic: no hits..
Replies: 4
Views: 565

Re: no hits..

For that amount of traffic I would rather use a dedicated server running Squid proxy.

I think the MikroTik web proxy only reports a hit if the object was cached. Could you perhaps state what RB you're using and which version of ROS?
hello pada currently using RB450G 3.0 ROS
by Myron
Sat Jun 19, 2010 9:20 am
Forum: General
Topic: no hits..
Replies: 4
Views: 565

no hits..

hi to all expert my web proxy working fine but i saw in monitor shows no hits i this normal? [myron@Kamote] /ip proxy> monitor status: running uptime: 2w2d3h34m21s requests: 5342820 hits: 0 cache-used: 0KiB total-ram-used: 4860KiB received-from-servers: 130887613KiB sent-to-clients: 130726028KiB hit...
by Myron
Thu Jun 17, 2010 7:49 am
Forum: General
Topic: ADSL2+ RFC1483 Zyxel 660h-T1 v2 Bridge Mode How To? RB1100
Replies: 11
Views: 4079

Re: ADSL2+ RFC1483 Zyxel 660h-T1 v2 Bridge Mode How To? RB11

I have a ADSL2+ line and a Zyxel 660h-T1 v2 my router conf. is: Encapsulation RFC 1483 Multiplexing LLC VPI 8 VCI 35 Mode : routing Now I want to change "routing mode" to "bridge mode" because I want to use my RB1100 with direct public IP and I want to use the Zyxel modem like a trasparent modem. H...
by Myron
Thu Jun 10, 2010 5:24 am
Forum: General
Topic: defrent subnet appear!
Replies: 3
Views: 930

Re: defrent subnet appear!

and ask your ISP about those IPs =)
hi chupaka the problem been solved i found out the damn netgear router this router been use by other department office i tried to pullout then suddenly the 10.4 disappear.

thanks
by Myron
Wed Jun 09, 2010 10:36 am
Forum: General
Topic: What port and protocol does EOIP use?
Replies: 10
Views: 26108

Re: What port and protocol does EOIP use?

Yes, there'd be an IP conflict. Presumably hosts on either side would prefer the host on their side as that ARP reply would come much sooner, I guess. You can use DHCP on both sides, just make sure the pools don't overlap. hi fewi good afternoon i try a several test both mik, i saw packets sending ...
by Myron
Tue Jun 08, 2010 6:55 am
Forum: General
Topic: What port and protocol does EOIP use?
Replies: 10
Views: 26108

Re: What port and protocol does EOIP use?

Yes, there'd be an IP conflict. Presumably hosts on either side would prefer the host on their side as that ARP reply would come much sooner, I guess. You can use DHCP on both sides, just make sure the pools don't overlap. thanks fewi for quick response, i think the best solution as you said dont m...
by Myron
Tue Jun 08, 2010 5:51 am
Forum: General
Topic: What port and protocol does EOIP use?
Replies: 10
Views: 26108

Re: What port and protocol does EOIP use?

There is no port. PPTP runs a control channel on tcp/1723 and data flows over GRE, which is IP protocol 47. EoIP, like PPTP, runs over GRE (IP protocol 47) but doesn't have a control channel. hi fewi i am new in mikrotik i have some question about the EoIP tunnel as i read the documentation http://...
by Myron
Sun Jun 06, 2010 6:04 pm
Forum: General
Topic: defrent subnet appear!
Replies: 3
Views: 930

defrent subnet appear!

hey guy i have strange ip 192.168.10.4 tcp and udp showing in torch at WAN Ethernet port can anyone please what the hell is this and where this come from? http://i623.photobucket.com/albums/tt318/iwantlemonjuice/104.jpg ether1 port = WAN and public static ip and nated ether2 port = 192.168.1.0/24 et...
by Myron
Fri Jun 04, 2010 8:31 am
Forum: The User Manager
Topic: UserMan
Replies: 5
Views: 1507

Re: UserMan

maybe you miss something to configure your radius local ip, try to add ip router in usermanger 127.0.0.1 and put password and now in winbox you can see radius and add ip address 127.0.0.1 and your password same as you provide in userman router pass.

sori for my bad english :)
by Myron
Tue Jun 01, 2010 4:48 am
Forum: Beginner Basics
Topic: local IP in hotspot
Replies: 1
Views: 372

local IP in hotspot

hey guys i have my hotspot running fine and works well but my problem is the 6 picostation assigned static ip individually is behind hotspot and natted, 6 pico is unreachable to ping, anyone can help how to passtrough even the hotspot network is natted.

ps: sori my bad english :D

thanks
by Myron
Mon May 31, 2010 5:56 am
Forum: General
Topic: how can i show to all my customers when internet is down?
Replies: 30
Views: 4191

Re: how can i show to all my customers when internet is down

i have this scenario. I got an ISP and i would like to put some html+jpg in my routerboard and some way when my ISP is down mikrotik will foward that picture or html to everyone saying SORRY THE SERVICE WILL BE DOWN FOR A WHILE. yeah is a good thing like gabak idea when the internet down is shows S...
by Myron
Fri May 21, 2010 6:57 am
Forum: The User Manager
Topic: Voucher with Serial Numbers !
Replies: 62
Views: 37653

Re: Voucher with Serial Numbers !

me to please myronray.sy.evasco@hotmail.com :D

thanks thanks
by Myron
Wed May 19, 2010 2:17 am
Forum: Beginner Basics
Topic: 1 ether port multiple hotspot possible?
Replies: 5
Views: 976

Re: 1 ether port multiple hotspot possible?

You can add second subnet as /ip address to the local interface. If HotSpot universal client/DHCP/etc. are used, correct used-pool and add new subnet to it. arrrgg fewi sorry for my previous post i did a wrong explanation ^^ this is what i mean sergejs reply adding another subnet in the same ether....
by Myron
Tue May 18, 2010 9:32 am
Forum: General
Topic: new rb750g
Replies: 2
Views: 510

Re: new rb750g

read this info this way - have level 4 license and i will be able to install RotuerOS 5 when it come out (and all v6beta and rc versions)

level 4 will be enough for the router to handle.
ahhh thanks for the info janisk
by Myron
Tue May 18, 2010 8:45 am
Forum: General
Topic: new rb750g
Replies: 2
Views: 510

new rb750g

hi to mik gurus i have bought new rb750g today my question is since the license level is 4 it is possible to upgrade to 5? [myron@Seawind Resort] /system routerboard> print routerboard: yes model: "750G" serial-number: "228F01AE21FD" current-firmware: "2.20" upgrade-firmware: "2.23" [myron@Seawind R...
by Myron
Mon May 17, 2010 4:00 am
Forum: Beginner Basics
Topic: 1 ether port multiple hotspot possible?
Replies: 5
Views: 976

Re: 1 ether port multiple hotspot possible?

Yes if you use VLANs. No if you don't.
thanks fewi for response can you give me a basic example this setup.. my current hotspot is working fine im planning to add another subnet for hotspot in same ether port.

thanks a lot
by Myron
Sun May 16, 2010 5:32 am
Forum: Beginner Basics
Topic: 1 ether port multiple hotspot possible?
Replies: 5
Views: 976

1 ether port multiple hotspot possible?

hi to all gurus

it is possible in 1 ether port let say 4 hotspot setup?

thanks
by Myron
Sat Mar 20, 2010 2:44 pm
Forum: Beginner Basics
Topic: help in NETMAP
Replies: 5
Views: 1322

Re: help in NETMAP

I noticed the interface names are not "normal". Is the router a RB750? If so, you need to remove all the local interfaces from the switch in "/interface ethernet". /interface ethernet set X master-port=none ADD: If you are doing these changes from one of the localnet ports (2-5), insure it is 2. Th...
by Myron
Sat Mar 20, 2010 4:05 am
Forum: Beginner Basics
Topic: help in NETMAP
Replies: 5
Views: 1322

Re: help in NETMAP

Netmap isn't required for this. That is for forwarding a range of ips. I would use srcnat and dstnat rules. /ip firewall nat add chain=srcnat action=src-nat src-address=10.13.0.2 to-addresses=x.x.124.203 place-before=0 add chain=dstnat action=dst-nat dst-address=x.x.124.203 to-addresses=10.13.0.2 p...
by Myron
Fri Mar 19, 2010 1:09 pm
Forum: Beginner Basics
Topic: help in NETMAP
Replies: 5
Views: 1322

help in NETMAP

hello guys need ur help here , my isp provide me 2 public ip and the first ip xxx.xx.124.201 asign in my mikbox WAN ether1 the second ip is xxx.xx.124.203, now i have my freebsd box i want to map the second public ip in my freebox i olredy asign the xxx.xx.124.203 in my freebox, take look my config ...
by Myron
Mon Mar 15, 2010 4:22 am
Forum: Beginner Basics
Topic: input chain doesn work
Replies: 4
Views: 536

Re: input chain doesn work

http://wiki.mikrotik.com/wiki/Manual:Packet_Flow Destination NAT happens in prerouting. After that the packet's destination address has been rewritten and it goes into the forward chain. Change add action=accept chain=input comment="nano allow" disabled=no protocol=tcp src-port=12345 to add action=...
by Myron
Mon Mar 15, 2010 3:19 am
Forum: Beginner Basics
Topic: input chain doesn work
Replies: 4
Views: 536

Re: input chain doesn work

It doesnt go in the input chain, it is forwarding the traffic, so it goes in the forward chain. ;)
thanks for response road but im accessing from outside
by Myron
Sun Mar 14, 2010 2:50 pm
Forum: Beginner Basics
Topic: input chain doesn work
Replies: 4
Views: 536

input chain doesn work

hey guys need your help i have my internal nano station ip and it works perfect if i disable the default rules but the problem is if i enable cant redirect the traffic to nano ip heres my config add action=dst-nat chain=dstnat comment="station side nano" disabled=no dst-address=\ xxx.xx.xxx.201 dst-...
by Myron
Fri Mar 12, 2010 9:40 am
Forum: General
Topic: How can I reach my PC from WAN?
Replies: 6
Views: 1035

Re: How can I reach my PC from WAN?

try set proxy arp
by Myron
Sat Mar 06, 2010 1:54 pm
Forum: General
Topic: license upgrade problem
Replies: 5
Views: 559

Re: license upgrade problem

ok thanks chupaks
by Myron
Sat Mar 06, 2010 3:50 am
Forum: General
Topic: license upgrade problem
Replies: 5
Views: 559

Re: license upgrade problem

chupaka my big problem is i forgot to copy my old key and i deleted in files, oh my godness :(
by Myron
Sat Mar 06, 2010 3:44 am
Forum: General
Topic: in mangle, mark only new conections
Replies: 3
Views: 650

Re: in mangle, mark only new conections

i made this one and it could help a little limit for p2p user :D and you can adjust in pcq-rate in mangle /ip firewall mangle add action=mark-connection chain=prerouting comment=P2P disabled=yes new-connection-mark=\ small-connection p2p=all-p2p passthrough=yes add action=mark-packet chain=preroutin...
by Myron
Thu Mar 04, 2010 6:02 pm
Forum: General
Topic: Queues. Reach limits and router slows down...
Replies: 10
Views: 2243

Re: Queues. Reach limits and router slows down...

The pings were very slow - 1000+ms. The CPU usage was not very high, between 0-10%. I then saw that when I disconnected one of the local users on my lan, the problem went away and the pings stabilized on +-4ms. I contacted the user and asked what he's busy doing. Said he's sending out a large email...
by Myron
Thu Mar 04, 2010 11:55 am
Forum: General
Topic: license upgrade problem
Replies: 5
Views: 559

license upgrade problem

hello mikrotik i have my old rb450 3.30 and before this router works stable without rebooting and i try to upgrade the license via update license key after upgrade and has a new license key i notice every 24 hours my router stop working, mikrotik is there any solution to back my old license key??? a...
by Myron
Fri Feb 26, 2010 4:14 am
Forum: Beginner Basics
Topic: question on VPN
Replies: 9
Views: 1511

Re: question on VPN

It should be src-port. Since you use TCP port 1723 I presume you are using a PPTP tunnel. If you do that, you also need to create a firewall rule to let through all traffic via the GRE protocol. But I am not sure on this, first use TCP 1723 only, if that does not work add the GRE rule. And please r...
by Myron
Thu Feb 25, 2010 4:45 pm
Forum: Beginner Basics
Topic: question on VPN
Replies: 9
Views: 1511

Re: question on VPN

Myron, I'm a noob with VPN too, but I figured it is necessary to set rules that allow a VPN tunnel to be opened up. For IPSec this would be UDP port 500, and ipsec-esp protocol. /ip firewall filter add action=accept chain=input comment=VPN disabled=no protocol=ipsec-esp add action=accept chain=inpu...
by Myron
Thu Feb 25, 2010 1:19 pm
Forum: Beginner Basics
Topic: question on VPN
Replies: 9
Views: 1511

Re: question on VPN

set proxy-arp on interface with your local network /interface ethernet set <ethernet name> arp=proxy-arp hi janisk my VPN works fine if i disable drop rules >> action=drop chain=forward comment="" disabled=yes out-interface=Ether1-WAN if i enable the drop rules the outside client cant connect VPN t...
by Myron
Tue Feb 23, 2010 9:55 am
Forum: General
Topic: RB450G wierd
Replies: 0
Views: 380

RB450G wierd

hello guys one of my rb450g very strange issue in every 2 to 3 days the mik stops working all office, guest etc computer cant browse this 3rd time happen this issue, the way i solved the problem is to reboot the box :( :( :( i dont want to reboot the box in every 2 to 3 days, mikrotik staff can you ...
by Myron
Thu Feb 18, 2010 2:27 pm
Forum: Beginner Basics
Topic: hotspot + radius in 3.30
Replies: 4
Views: 558

Re: hotspot + radius in 3.30

I thought the service in the radius section was supposed to be "hotspot". Does "login" service work for the hotspot too? Or is the "hotspot" under the "login" in that entry as well? in hotspot server profile i forgot to tick = use radius that is why the usermanager router ip cannot point under the ...
by Myron
Thu Feb 18, 2010 6:24 am
Forum: Beginner Basics
Topic: hotspot + radius in 3.30
Replies: 4
Views: 558

Re: hotspot + radius in 3.30

127 hehe :twisted:
ohhh sori, but i change 127 still same problem :shock:

problem solved hehehe forgot to tick ip/hotspot/server profiles use radius :lol:
by Myron
Thu Feb 18, 2010 5:04 am
Forum: Beginner Basics
Topic: hotspot + radius in 3.30
Replies: 4
Views: 558

hotspot + radius in 3.30

hey guys please what going on my hotspot i have a problem since i downgraded to 3.30 my generated account cant log in anymore, before in 4.5 its work fine! [myron@Kamote] /radius> print Flags: X - disabled # SERVICE CALLED-ID DOMAIN ADDRESS SECRET 0 login 172.0.0.1 123456 hotspot in usermanager defa...
by Myron
Wed Feb 17, 2010 10:10 am
Forum: General
Topic: RB450G RouterOS 4.5 Torch BUG ?
Replies: 4
Views: 1907

Re: RB450G RouterOS 4.5 Torch BUG ?

RB450G. CPU sits at 20% or so, then I torch a busy Ethernet interface and CPU spikes to 100% and no output data. I had same problems on a RB133 RB433 RB411A RB450 . 3.28 3.30 4.4 4.5 having this same issue on Thoughts? Happy to provide additional data. 1.jpg 2.jpg same issue here sometimes when i r...
by Myron
Tue Feb 16, 2010 3:10 am
Forum: Beginner Basics
Topic: PCC in dynamic ip provide by ISP
Replies: 3
Views: 640

Re: PCC in dynamic ip provide by ISP

in general - yes

what type of connection is used?
one is cable internet and one is dsl no ppoe both just normal nat connection, anyway chupaks thanks reply
by Myron
Fri Feb 12, 2010 3:41 pm
Forum: Beginner Basics
Topic: PCC in dynamic ip provide by ISP
Replies: 3
Views: 640

PCC in dynamic ip provide by ISP

hey guys i test 2 isp with static public ip and it works in PCC setup, now my question is does PCC works in dynamic ip provided also of isp example:

2 defrent ISP with dynamic ip >>>>>> mik (PCC) >>>> client = it works??

thanks
by Myron
Sat Jan 23, 2010 10:22 am
Forum: General
Topic: mikrotik.com site down?
Replies: 5
Views: 788

Re: mikrotik.com site down?

yeah i notice too even the manual page at winbox is unrechable.
by Myron
Fri Jan 22, 2010 4:36 am
Forum: General
Topic: MUM in CHINA 2010
Replies: 72
Views: 12726

Re: MUM in CHINA 2010

i wish i can go there :) how about in the philippines no MUM?
by Myron
Wed Jan 20, 2010 7:03 am
Forum: Beginner Basics
Topic: Basic Mikrotik Training Videos - FREE - *Update 03/15/2010*
Replies: 62
Views: 32908

Re: Basic Mikrotik Training Videos - FREE - *Update 01/04/2010*

hi gregg atlast the log shows invalid hehehe >>>>>>> invalid exchange type 243 from 98.237.177.6(500) is this someone/other IP's? :?
by Myron
Wed Jan 20, 2010 4:48 am
Forum: Beginner Basics
Topic: Basic Mikrotik Training Videos - FREE - *Update 03/15/2010*
Replies: 62
Views: 32908

Re: Basic Mikrotik Training Videos - FREE - *Update 01/04/2010*

hi gregg i follow your ipsec video tutorial this afternoon and i try my 2 mik router with public static ip each, but it doesnt handshake the log shows nothing, router a ROS 3.30 <<<>>> ROS 4.2 or incompatible in deffrent version of ROS? Myron, If you went to system->logging-> and added IPSec to go ...
by Myron
Wed Jan 20, 2010 2:42 am
Forum: General
Topic: 450g LED meaning
Replies: 2
Views: 780

Re: 450g LED meaning

Im new so be easy on me! Got a 450 and learned to get a basic config up for local office, lights up as expected with green link light and bliking orange activity. Bought another that I thought was the same but turned out to be 450g. Now the only time i see a green light is when I plug my laptop int...
by Myron
Tue Jan 19, 2010 7:54 am
Forum: Beginner Basics
Topic: Basic Mikrotik Training Videos - FREE - *Update 03/15/2010*
Replies: 62
Views: 32908

Re: Basic Mikrotik Training Videos - FREE - *Update 01/04/2010*

hi gregg i follow your ipsec video tutorial this afternoon and i try my 2 mik router with public static ip each, but it doesnt handshake the log shows nothing, router a ROS 3.30 <<<>>> ROS 4.2 or incompatible in deffrent version of ROS? Myron, If you went to system->logging-> and added IPSec to go ...
by Myron
Tue Jan 19, 2010 4:55 am
Forum: Beginner Basics
Topic: Basic Mikrotik Training Videos - FREE - *Update 03/15/2010*
Replies: 62
Views: 32908

Re: Basic Mikrotik Training Videos - FREE - *Update 01/04/2010*

hi gregg

i follow your ipsec video tutorial this afternoon and i try my 2 mik router with public static ip each, but it doesnt handshake the log shows nothing, router a ROS 3.30 <<<>>> ROS 4.2 or incompatible in deffrent version of ROS?
by Myron
Tue Jan 12, 2010 7:01 am
Forum: General
Topic: how to expand pool in hotspot
Replies: 2
Views: 430

Re: how to expand pool in hotspot

ok, thanks fewi for advice the solution
by Myron
Tue Jan 12, 2010 4:39 am
Forum: General
Topic: how to expand pool in hotspot
Replies: 2
Views: 430

how to expand pool in hotspot

hey guys i have a question my hotspot works fine in ether4 at the 10.12.0.0/24 now my pool range is 10.12.0.20-10.12.0.254, my problem is dhcp lease is almost full how do i expand my dhcp? ori will add >> next pool range? like 10.12.1.20-10.12.0.254 << is this correct? :D

please help me
by Myron
Tue Jan 05, 2010 2:09 pm
Forum: General
Topic: RouterOS 4.4 released
Replies: 40
Views: 7353

Re: RouterOS 4.4 released

mine in rb450g 4.4ROS:

Voltage: 22.1 V
88 C

is this normal????
i downgrade to 4.2 now the health is :

Volatge: 22.1
41 C

:shock: :shock: :shock:
by Myron
Tue Jan 05, 2010 6:33 am
Forum: General
Topic: RouterOS 4.4 released
Replies: 40
Views: 7353

Re: RouterOS 4.4 released

mine in rb450g 4.4ROS:

Voltage: 22.1 V
88 C

is this normal????
by Myron
Tue Dec 29, 2009 3:35 pm
Forum: Beginner Basics
Topic: VPN and hotspot posible???
Replies: 1
Views: 606

VPN and hotspot posible???

hey guys it is possible to redirect hotspot login page via VPN?
ex. my client pc connected to mik vpn when i open the webpage the hotspot login appear, its posible this kind of setup?

thanks
by Myron
Sat Dec 26, 2009 3:20 am
Forum: General
Topic: Merry Xmas all MT users
Replies: 8
Views: 864

Re: Merry Xmas all MT users

Maligayang Pasko at Manibagong Taon...

from Philippines
by Myron
Fri Dec 11, 2009 4:33 am
Forum: Beginner Basics
Topic: VPN priority
Replies: 0
Views: 380

VPN priority

hey guy can someone have an idea how to priority VPN connection traffic

thanks
by Myron
Thu Dec 03, 2009 1:16 am
Forum: General
Topic: pls help guys :)
Replies: 12
Views: 1160

Re: pls help guys :)

The routers should have the following routes: Router A (the one with an Internet connection): /ip route add dst-address=0.0.0.0/0 gateway=[WAN gateway] add dst-address=10.14.0.1/24 gateway=10.13.0.2 Router B: /ip route add dst-address=0.0.0.0/0 gateway=10.13.0.1 You really need to read up on TCP/IP...
by Myron
Wed Dec 02, 2009 2:25 pm
Forum: General
Topic: pls help guys :)
Replies: 12
Views: 1160

Re: pls help guys :)

any help?
by Myron
Wed Dec 02, 2009 9:24 am
Forum: General
Topic: pls help guys :)
Replies: 12
Views: 1160

Re: pls help guys :)

I'm a little confused.

Are you removing the 0.0.0.0/0 route when adding the 10.14.0.0/24 route?
yeah, i replace this one (router-b side) ip route add dst-address=10.14.0.0/24 gateway=10.13.0.2
by Myron
Wed Dec 02, 2009 7:45 am
Forum: General
Topic: pls help guys :)
Replies: 12
Views: 1160

Re: pls help guys :)

Hi Myron in router-a i can ping 10.13.0.2 but if im in router b it wont ping 10.13.0.1 using laptap connected to 10.14.0.0/24 If you're trying via a laptop connected to router b, then also check that your laptop has either a default route via 10.14.0.1 or has a route to 10.13.0.0/24 via 10.14.0.1. ...
by Myron
Wed Dec 02, 2009 5:19 am
Forum: General
Topic: pls help guys :)
Replies: 12
Views: 1160

Re: pls help guys :)

in router-a i can ping 10.13.0.2 [...] the problem is the 10.13.0.2 wont ping if im in router-a Which one is it? if im in router b it wont ping 10.13.0.1 using laptap connected to 10.14.0.0/24 Without a route to 10.14.0.0/24 for router A any traffic going back to the client on that network won't ma...
by Myron
Wed Dec 02, 2009 4:56 am
Forum: General
Topic: pls help guys :)
Replies: 12
Views: 1160

Re: pls help guys :)

ether2 on router B and ether5-local on router A are directly connected? Are the interfaces showing as running? Have you confirmed the cable is OK? When testing, are you pinging directly from the router, or from a client behind it on 10.14.0.1/24? Router A has no route for that network, regardless o...
by Myron
Wed Dec 02, 2009 4:40 am
Forum: General
Topic: pls help guys :)
Replies: 12
Views: 1160

Re: pls help guys :)

ether2 on router B and ether5-local on router A are directly connected? Are the interfaces showing as running? Have you confirmed the cable is OK? When testing, are you pinging directly from the router, or from a client behind it on 10.14.0.1/24? Router A has no route for that network, regardless o...
by Myron
Wed Dec 02, 2009 4:13 am
Forum: General
Topic: pls help guys :)
Replies: 12
Views: 1160

pls help guys :)

guys i have my problem maybe someone can resolved this, my second router cannot ping to router-a 10.13.0.1 ip the poackets wont go to outside destination :( :( heres my config did i miss something my config in router b? router a /ip address add address=10.11.0.1/24 broadcast=10.11.0.255 comment="Off...
by Myron
Mon Nov 30, 2009 1:57 pm
Forum: The User Manager
Topic: account expiration
Replies: 11
Views: 5443

Re: account expiration

Are you using v3.x or v4.x
4.2
by Myron
Tue Nov 24, 2009 2:22 pm
Forum: General
Topic: yahoo messenger L7!!!
Replies: 1
Views: 467

Re: yahoo messenger L7!!!

until now no response?? :(
by Myron
Mon Nov 23, 2009 2:05 am
Forum: General
Topic: yahoo messenger L7!!!
Replies: 1
Views: 467

yahoo messenger L7!!!

can someone can confirm this "^(ymsg|ypns|yhoo).\?.\?.\?.\?.\?.\?.\?[lwt].*\C0\80" works in 4.2???? i set to drop ;;; yahoo messenger chain=forward action=drop layer7-protocol=yahoo-messenger 8 yahoo-messenger ^(ymsg|ypns|yhoo).?.?.?.?.?.?.?[lwt].*\C0\80 but all the staff still use/open the yahoo me...
by Myron
Sun Nov 22, 2009 3:42 am
Forum: Beginner Basics
Topic: hotspot
Replies: 2
Views: 522

Re: hotspot

hi fewi still no luck i set the AP bypassed and allow the icmp in wall garden ip but the destination host is unreachable :(

i using my office computer (10.11.0.15) pinging to 10.12.0.6 (nanostation act as AP)

thanks fewi for response hope you can solved my problem
by Myron
Sat Nov 21, 2009 4:23 pm
Forum: Beginner Basics
Topic: pc based hotspot and user manager to control wds
Replies: 2
Views: 534

Re: pc based hotspot and user manager to control wds

Problem solved!
how can you solved? hehe
by Myron
Sat Nov 21, 2009 3:58 pm
Forum: Beginner Basics
Topic: hotspot
Replies: 2
Views: 522

hotspot

hello to all guru i have a question my hotspot is running works and fine, my mikbox have 5 ports the ether4 is the hotspot network ether1 = wan port ether2 = application servers 10.2.2.0/24 ether3 = office network 10.11.0.0/24 ether4 = hotspot 10.12.0.0/24 ether5 = 10.13.0.1/30(connected to 2nd rout...
by Myron
Sat Nov 21, 2009 3:47 pm
Forum: Beginner Basics
Topic: Block File Sharing !
Replies: 6
Views: 3241

Re: Block File Sharing !

Or, read the manual. :) If you use MikroTik RouterOS as an Access Point, default-forwarding is normally set to forward frames to other AP clients. This can be disabled under the wireless settings for each wireless interface card. This Option work when Run in Hotspot ? vireng my ubi nanostation conn...
by Myron
Sat Nov 21, 2009 7:22 am
Forum: The User Manager
Topic: account expiration
Replies: 11
Views: 5443

Re: account expiration

You can create a profile specifying uptime-limit=74h and validity=7d.>>>this means the user has just 74h uptime which must be used up in 7d. If after 7d they have only used 10h, the remaining 64h is lost. If you extend the validity to say 30d >>>this means that the user can spread their 74h uptime ...
by Myron
Tue Nov 17, 2009 5:42 pm
Forum: The Dude
Topic: using dude block my IP
Replies: 4
Views: 1361

Re: using dude block my IP

Accept the admin IP before all those rules, like I said.
/ip firewall filter add chain=input src-address=ADMIN_IP action=accept place-before=17
wow thats great fewiiiii!!!!
by Myron
Tue Nov 17, 2009 5:14 pm
Forum: The Dude
Topic: using dude block my IP
Replies: 4
Views: 1361

Re: using dude block my IP

Simple solution: except your admin IP that is to be allowed to scan from being firewalled further down the chain by adding an accept rule for it at the very top. hi fewi check pls, where do i put the accept rules my ip or i add in src address(admin ip) and tick the exception? please help 17 ;;; Por...
by Myron
Tue Nov 17, 2009 3:09 pm
Forum: The Dude
Topic: using dude block my IP
Replies: 4
Views: 1361

using dude block my IP

hey guys i have question regarding this dude application, im have my dmitry firewalling such as block port scanner everytime i open my dude and scan network my computer ip block. is there anyway to prebent this kind of config?

thanks
by Myron
Sat Nov 14, 2009 2:56 pm
Forum: General
Topic: help some sites not opening in MT using hotspot
Replies: 3
Views: 559

Re: help some sites not opening in MT using hotspot

Try to set MTU to 1480 or less...
flav what is the deference if i modify the MTU? my MTU set as default but other guru change their MTU :)
by Myron
Sat Nov 07, 2009 5:26 am
Forum: Forwarding Protocols
Topic: how to connect two routers
Replies: 7
Views: 15603

Re: how to connect two routers

lol i solved the problem is in the 10.13.0.2 if i don't put /24 the destination is unreachable because the router a 10.13.0.1/30 is 3 host ip only :), my router a and router b are connected now
by Myron
Sat Nov 07, 2009 4:46 am
Forum: Forwarding Protocols
Topic: how to connect two routers
Replies: 7
Views: 15603

Re: how to connect two routers

Hi, you can read in the wiki about nat and masquerade. It's easy. The router gateway must be the WAN ip and the gateway for 101.x must be 101.1 hello iber this is my router a and router b config still unreachable :( router a # ADDRESS NETWORK BROADCAST INTERFACE 0 ;;; Office Network 10.11.0.1/24 10...
by Myron
Fri Nov 06, 2009 11:42 am
Forum: Forwarding Protocols
Topic: how to connect two routers
Replies: 7
Views: 15603

Re: how to connect two routers

Hi, you can read in the wiki about nat and masquerade. It's easy.

The router gateway must be the WAN ip and the gateway for 101.x must be 101.1
ok ber i try tommorow

thanks
by Myron
Fri Nov 06, 2009 11:23 am
Forum: Forwarding Protocols
Topic: how to connect two routers
Replies: 7
Views: 15603

Re: how to connect two routers

yes iber that's what i want 2 router in single cat5 cable :D
for example i have my 3 ports mik router
ether 1 = wan
ether 2 = local 100.100.100.1
ether 3 = local 100.100.101.1 <<<< >>>> connect to second router, i need static routing and what is the gateway?

thanks iber
by Myron
Fri Nov 06, 2009 10:22 am
Forum: Forwarding Protocols
Topic: how to connect two routers
Replies: 7
Views: 15603

how to connect two routers

hey guys do u have any basic guide how to connect two routers? like static routic? ehehe :D can someone post a basic configuration

thanks
by Myron
Fri Nov 06, 2009 8:17 am
Forum: General
Topic: CLIENT ISOLATION
Replies: 3
Views: 1193

Re: CLIENT ISOLATION

The way Hotspots work that - usually - cannot be done on the router. Hotspots run on a network gateway interface. Traffic between clients never flows through the router, so the router cannot block it. This is a feature you'd implement at the switch or AP level. You _could_ make a whole lot of /30 n...
by Myron
Fri Nov 06, 2009 5:36 am
Forum: General
Topic: CLIENT ISOLATION
Replies: 3
Views: 1193

CLIENT ISOLATION

helo to all mik guru, i have my hotspot working fine without any problem but my concern is the hotpot has CLIENT ISOLATION features? everytime i connected to hotspot the other hotspot user(client) shows computer name and how to stop and block this kind of issue?

thanks thanks
by Myron
Thu Nov 05, 2009 11:52 am
Forum: General
Topic: level 4 license
Replies: 4
Views: 823

Re: level 4 license

atlas its level 5 license, i upgrade the firmware, i upgrade the license key, i upgrade the routerOS now is 4.2 my rb450g run like a hell hehe :)
by Myron
Thu Nov 05, 2009 5:40 am
Forum: The User Manager
Topic: user manager pls help
Replies: 2
Views: 698

Re: user manager pls help

hi fewi thanks for support its working now, i add in radius ip and secret.

thanks fewi
by Myron
Thu Nov 05, 2009 4:07 am
Forum: The User Manager
Topic: user manager pls help
Replies: 2
Views: 698

user manager pls help

i test 1 user created in user manager but the login and pass does not accept, is there any config in hotspot? pls help
by Myron
Tue Nov 03, 2009 10:38 am
Forum: General
Topic: level 4 license
Replies: 4
Views: 823

level 4 license

hello to all mikrotik developer

i checked my newly purchased rb450g has a license level 4 how do i upgrade to lvl 5??
and i notice the the ether port only orange blinking the green does not?? what is this means?

thanks
by Myron
Sat Oct 31, 2009 4:14 am
Forum: Beginner Basics
Topic: rb450 to rb450g
Replies: 2
Views: 1082

rb450 to rb450g

hi all mik guru

my rb450g just arrived today for replacement of my old rb450 but how to upload my existing config from rb450 to new rb450g?

thanks
by Myron
Tue Oct 27, 2009 10:23 am
Forum: Beginner Basics
Topic: Block Ping To Mikrotik OS
Replies: 5
Views: 2039

Re: Block Ping To Mikrotik OS

Everyone Can Ping To My Server From LAN.

How Can i Block Ping So That No One Can Ping To Server?

try drop icmp src /24 to dst to your server IP in filter rules

thanks
by Myron
Tue Oct 27, 2009 4:38 am
Forum: Beginner Basics
Topic: simple queue tree
Replies: 0
Views: 355

simple queue tree

hey guys :D little by little im learning mikrotik stuff now my question is how to setup queue tree with voice, http, p2p can you post a simple queue tree.

your help would much appreciated

thanks
by Myron
Sat Oct 24, 2009 11:26 am
Forum: Beginner Basics
Topic: Routerboard 750 with Motorola Surfboard (Time Warner Cable)
Replies: 2
Views: 1263

Re: Routerboard 750 with Motorola Surfboard (Time Warner Cable)

Hello! Just received my first MikroTick router today, the 750. I'm just trying to get internet through the device with my cable modem (which I'm using now to write this - connected to my Linksys wireless router). The modem is a Motorola Surfboard. I plugged it into Ethernet port 1, direct from mode...
by Myron
Sat Oct 24, 2009 3:29 am
Forum: General
Topic: v3.X uptime challenge
Replies: 55
Views: 12256

Re: v3.X uptime challenge

wow 288 days O_O!
by Myron
Wed Oct 21, 2009 12:04 pm
Forum: The User Manager
Topic: account expiration
Replies: 11
Views: 5443

Re: account expiration

You can create a profile specifying uptime-limit=74h and validity=7d.>>>this means the user has just 74h uptime which must be used up in 7d. If after 7d they have only used 10h, the remaining 64h is lost. If you extend the validity to say 30d >>>this means that the user can spread their 74h uptime ...
by Myron
Wed Oct 21, 2009 6:47 am
Forum: Beginner Basics
Topic: how to change mac in port
Replies: 1
Views: 1559

how to change mac in port

hi to all i have a question, here in Philippines one of the well known ISP is smart communication so called smartbro wireless services, there machine using mac authentication. for example once your computer connected to smartbro and the mac will register in smartbro machine or whatsoever they use, n...
by Myron
Wed Oct 21, 2009 6:21 am
Forum: The User Manager
Topic: account expiration
Replies: 11
Views: 5443

account expiration

helo to all mikrotik guru

in user manager section if i create/generate one account and 74 hours usage.
my question is = it is possible the account will expire if not in use? let say i set 7 days expiration.

thanks
by Myron
Mon Oct 19, 2009 8:10 am
Forum: Beginner Basics
Topic: what is the best way to load balancing ???
Replies: 14
Views: 2181

Re: what is the best way to load balancing ???

thanks man thanks for helpful posting
by Myron
Fri Oct 16, 2009 1:56 pm
Forum: Beginner Basics
Topic: what is the best way to load balancing ???
Replies: 14
Views: 2181

Re: what is the best way to load balancing ???

how about 4 WAN balancing, can someone post, would be appreciated

thanks
by Myron
Thu Oct 15, 2009 3:12 am
Forum: General
Topic: imesh peer to peer
Replies: 4
Views: 588

Re: imesh peer to peer

try this: /ip firewall layer7-protocol {add name=imesh regexp="^(post[\09-\0D -~]*<PasswordHash>................................</PasswordHash><ClientVer>|\34\80\?\0D\?\FC\FF\04|get[\09-\0D -~]*Host: imsh\\.download-prod\\.musicnet\\.com|\02(\01|\02)\83.\?.\?.\?.\?.\?.\?.\?.\?.\?.\?.\?.\?.\?.\?.\?....
by Myron
Thu Oct 15, 2009 3:09 am
Forum: General
Topic: RouterOS v4 released
Replies: 38
Views: 3520

Re: RouterOS v4 released

i notice this V4 less of CPU process!! cool.. that's why i love mikrotik :lol:
by Myron
Thu Oct 15, 2009 1:00 am
Forum: General
Topic: imesh peer to peer
Replies: 4
Views: 588

Re: imesh peer to peer

L7?..
dear chupaka

if you have any imesh regexp scripts can you share with us i want to limit imesh to the client.

thanks
by Myron
Wed Oct 14, 2009 12:07 pm
Forum: General
Topic: imesh peer to peer
Replies: 4
Views: 588

imesh peer to peer

helo mikrotik

i check IMESH peer to peer is not included in firewall features, lots of client using imesh :(

thanks
by Myron
Wed Oct 14, 2009 6:49 am
Forum: Beginner Basics
Topic: graph problem
Replies: 1
Views: 427

Re: graph problem

anyone??
by Myron
Wed Oct 14, 2009 5:16 am
Forum: Beginner Basics
Topic: PPTP link not working for Mikrtik routers over Inernet
Replies: 27
Views: 7704

Re: PPTP link not working for Mikrtik routers over Inernet

Hello There! I am using two Mikrotik routers one in the city(RB450) and other one at home(RB750). Both these routers are connected to two different ISPs. In the city router RB 450's ether1 is connected to the ISPs DSL line which gets dynamic IP from the ISP and other one RB750 at home is connected ...
by Myron
Wed Oct 14, 2009 4:19 am
Forum: Beginner Basics
Topic: graph problem
Replies: 1
Views: 427

graph problem

hey guys i have a problem in my mikbox graph via GUI, my ISP speed account is only 786kbps but why in graph it show 120MB o_O? how to return in normal rate graphing??
http://s623.photobucket.com/albums/tt31 ... =graph.jpg

thanks
by Myron
Wed Oct 07, 2009 5:49 am
Forum: General
Topic: hotspot login page
Replies: 3
Views: 708

Re: hotspot login page

WOW!!! the problem is solved thanks fewi for support very much appreciate.

regards
by Myron
Tue Oct 06, 2009 7:00 pm
Forum: General
Topic: hotspot login page
Replies: 3
Views: 708

Re: hotspot login page

What version? What's your setup? Check http://forum.mikrotik.com/viewtopic.php?f=2&t=34922 - maybe setting the address-pool on the Hotspot to 'none' will work for you, also. im using 3.30 [myron@MikroTik] /ip hotspot user profile> print Flags: * - default 0 * name="Hotel guest" address-pool=hotel-p...
by Myron
Tue Oct 06, 2009 3:57 pm
Forum: General
Topic: hotspot login page
Replies: 3
Views: 708

hotspot login page

hello to all mik guru i have a strange behaviour in my hotspot login page, when the client accessing my hotspot and put the username and pass and tick login its connected and the login page is freezes but when i put link site at the address bar the site is open, only the login page freezes, plsss he...
by Myron
Mon Sep 28, 2009 1:39 am
Forum: General
Topic: Problem with wlan and lan
Replies: 1
Views: 315

Re: Problem with wlan and lan

try to enable proxy-arp in interface menu tab
by Myron
Sat Sep 19, 2009 2:46 am
Forum: Beginner Basics
Topic: PCC in ros demo version
Replies: 1
Views: 423

PCC in ros demo version

helo to all

im just asking if the PCC will work in ros demo version?

because i have my friend work in IT company and he convince his boss to switch from sonicwall to mikrotik, there main problem is sonicwall cant handle load balance.

thanks