Community discussions

MUM Europe 2020

Search found 26 matches

by DeIM
Thu Dec 27, 2018 3:46 pm
Forum: General
Topic: How to set RB to work as router and public switch at one time
Replies: 4
Views: 434

Re: How to set RB to work as router and public switch at one time

Could someone lead me closer to how to set this to work or some links?
by DeIM
Tue Feb 20, 2018 2:52 pm
Forum: General
Topic: How to set RB to work as router and public switch at one time
Replies: 4
Views: 434

How to set RB to work as router and public switch at one time

Normally I connect RB (router to public network) to switch (which switches public network to other PCs) Is it possible to set RB962UiGS-5HacT2HnT (hAP ac) to take work of this switch?: Switch: 2 cables to other PCs 1 cable to ISP 1 cable to RB's WAN RB: 1 cable to Switch (NAT + router) 2 cables to l...
by DeIM
Thu May 15, 2014 9:08 pm
Forum: Beginner Basics
Topic: strange port forwarding
Replies: 5
Views: 953

Re: strange port forwarding

I've tried add <program 1 port> to SIP service ports and program 1 seems to work :D . I must do some more tests.
I've also recreated firewall rules.
by DeIM
Sun May 11, 2014 4:10 pm
Forum: Beginner Basics
Topic: strange port forwarding
Replies: 5
Views: 953

Re: strange port forwarding

It's strange - I see now. But I can't figure out how to set firewall rules properly. I've made final forward firewall rule: 8 chain=forward action=log log-prefix="drop::" And log prints drop on both program 1 and 2 - but program 2 has higher size of packet (>1k). Log also prints priority changes. My...
by DeIM
Sun May 11, 2014 2:55 pm
Forum: Beginner Basics
Topic: strange port forwarding
Replies: 5
Views: 953

Re: strange port forwarding

Rudios ... good point it could be the problem. /ip firewall filter> print Flags: X - disabled, I - invalid, D - dynamic 0 ;;; default configuration chain=input action=accept protocol=icmp 1 ;;; default configuration chain=input action=accept connection-state=established 2 ;;; default configuration c...
by DeIM
Sat May 10, 2014 1:40 pm
Forum: Beginner Basics
Topic: strange port forwarding
Replies: 5
Views: 953

strange port forwarding

Hi, I've RB751U-2HnD v5.26 and on my small server are two java programs (SIP based). 1) When I connect from inside of local network it runs flawlessly (new lines in log file). 2) When I wanna connect from internet (or outside of local network) it seems one program is unreachable, but second runs fla...
by DeIM
Wed Mar 16, 2011 4:02 pm
Forum: Wireless Networking
Topic: Lost connection, no beacons received
Replies: 44
Views: 20360

Re: Lost connection, no beacons received

replaced pigtail, still getting:
12:54:07 wireless,info [AP-MAC]@wlan1_CL: lost connection, no beacons received 
12:54:08 wireless,debug wlan1_CL: must select network 
:(
by DeIM
Sat Mar 12, 2011 7:39 pm
Forum: Wireless Networking
Topic: Lost connection, no beacons received
Replies: 44
Views: 20360

Re: Lost connection, no beacons received

It must be some HW issue. Maybe connector on new pigtail (MMCX) between miniPCI card and cable to Antenna. Or miniPCI card itself. The other (non-MT) devices aren't so sensitive to this regular 6:50 loss of signal. I disassembled it and found the dielectric is a little closer to the end of central m...
by DeIM
Mon Feb 28, 2011 9:01 pm
Forum: Wireless Networking
Topic: Lost connection, no beacons received
Replies: 44
Views: 20360

Re: Lost connection, no beacons received

Is there any other way how to stabilize connection? There isn't way how to set VirtualAP with Nstreme and normal AP without it, is there? Maybe there is problem within Mirkotik device - disconnection after exactly 6:50 minutes should be a clue. Try to disable CSMA/CA or completelly replace Mikrotik ...
by DeIM
Thu Feb 24, 2011 9:28 pm
Forum: Wireless Networking
Topic: Lost connection, no beacons received
Replies: 44
Views: 20360

Re: Lost connection, no beacons received

Tried mode="station-pseudobridge" but without "no beacons received" change.
Even though it seems reconnection is faster.
by DeIM
Wed Feb 23, 2011 8:52 pm
Forum: Wireless Networking
Topic: Lost connection, no beacons received
Replies: 44
Views: 20360

Re: Lost connection, no beacons received

Tomorrow I'll try mode="station" This is only one "station-wds" on this AP Signal strenghts -65 to -60, SNR around 45dB. Yes, still getting: 02:27:44 wireless,info [AP-MAC]@wlan1_CL: lost connection, no beacons received 02:27:46 wireless,debug wlan1_CL: must select network Is there any other option ...
by DeIM
Wed Feb 23, 2011 10:56 am
Forum: Wireless Networking
Topic: Lost connection, no beacons received
Replies: 44
Views: 20360

Re: Lost connection, no beacons received

Now wds-station disconnects after 6-50 minutes. (often more frequently) I noticed this (don't know if it's problem): http://forum.mikrotik.com/download/file.php?mode=view&id=6422&sid=a47db64de774da5ca8ba2306838a1964 When I open details of connection in Winbox on RB411 (main AP) RX sometimes varies. ...
by DeIM
Mon Feb 21, 2011 9:07 pm
Forum: Wireless Networking
Topic: Lost connection, no beacons received
Replies: 44
Views: 20360

Re: Lost connection, no beacons received

The connection to CPEs established :) forgot to renew new interface (R52nM) in bridge (wondering how it could work before, without this change) With default-authentication=no beacon loss happens more rare and 1x in one peace, but they are back when I rise signal strength on AP on RB433 :( . I suppos...
by DeIM
Mon Feb 21, 2011 8:05 pm
Forum: Wireless Networking
Topic: Lost connection, no beacons received
Replies: 44
Views: 20360

Re: Lost connection, no beacons received

debug log said (before change below): 03:07:02 wireless,info [AP-MAC]@wlan1_CL: lost connection, no beacons received 03:07:04 wireless,debug wlan1_CL: must select network [some AP-MACs] ... all 3x in log. I tried to reduce AP signal strength on RB433 and enable this AP and disconnect problem went aw...
by DeIM
Mon Feb 21, 2011 6:51 pm
Forum: Wireless Networking
Topic: Lost connection, no beacons received
Replies: 44
Views: 20360

Re: Lost connection, no beacons received

I've tried everything but nothing helped. I thought about different thing: I have two antennas on same holder both connected to different cards in RB433 Finally I've tried to disable AP on RB433 and connection drop went away. After that I've thought about reasons - so I switched frequency from 6 to ...
by DeIM
Mon Feb 21, 2011 3:08 pm
Forum: Wireless Networking
Topic: Lost connection, no beacons received
Replies: 44
Views: 20360

Re: Lost connection, no beacons received

Hi I have the same problem with no beacons received msg in CPE log Situation: RB411 as ap-bridge with clients connected to it and one RB433 (now as WDS station) as client(pseudobridge) and ap-bridge on second card. Distance is cca 600m, signal cca -60 to -65 dbm on both ends. At first I had: [ap-bri...
by DeIM
Fri Nov 20, 2009 5:43 pm
Forum: RouterBOARD hardware
Topic: ROS3.22 @ RB411AH simple queue doesn't work
Replies: 5
Views: 929

Re: ROS3.22 @ RB411AH simple queue doesn't work

Does anybody have RB411AH? How do you configure simple queues? I don't know what's wrong. Thank you for any help.
by DeIM
Sun Nov 08, 2009 4:39 pm
Forum: RouterBOARD hardware
Topic: ROS3.22 @ RB411AH simple queue doesn't work
Replies: 5
Views: 929

Re: ROS3.22 @ RB411AH simple queue doesn't work

Here it is. I click on Apply but I can't see any traffic. On next panel is set queue type to default-small.

Image
by DeIM
Sat Oct 31, 2009 6:16 pm
Forum: RouterBOARD hardware
Topic: ROS3.22 @ RB411AH simple queue doesn't work
Replies: 5
Views: 929

Re: ROS3.22 @ RB411AH simple queue doesn't work

successfully done, but had no effect :( maybe I do something wrong, but I don't think so.
by DeIM
Mon Oct 26, 2009 9:34 pm
Forum: RouterBOARD hardware
Topic: ROS3.22 @ RB411AH simple queue doesn't work
Replies: 5
Views: 929

ROS3.22 @ RB411AH simple queue doesn't work

Hi,

I have RB411AH and ROS 3.22. When I set some simple queues I can't see any traffic on them.
by DeIM
Thu Oct 22, 2009 5:53 pm
Forum: General
Topic: RouterOS License and v4 questions
Replies: 116
Views: 48572

Re: RouterOS License and v4 questions

I've RB433AH ROS 3.25 and RB411AH ROS 3.22 ... should I upgrade licence on both devices? Thanks
by DeIM
Wed Oct 21, 2009 9:53 pm
Forum: RouterBOARD hardware
Topic: network doesn't transmit MAC addresses
Replies: 7
Views: 908

Re: network doesn't transmit MAC addresses

I've solved downloading from my FTP server. There was arp=proxy-arp setting in bridge so I changed it to enabled and it runs now...

What I didn't know - that I can't see MAC addresses after client APs ... never mind. :D
by DeIM
Mon Oct 19, 2009 9:26 pm
Forum: RouterBOARD hardware
Topic: network doesn't transmit MAC addresses
Replies: 7
Views: 908

Re: network doesn't transmit MAC addresses

I don't know where the problem is ... I could give you information from my settings, but I don't know what information you need, so please ask freely :D

I switched all ARP settings on my RB to enabled, IMHO no masquerade is set.
by DeIM
Mon Oct 19, 2009 7:38 pm
Forum: RouterBOARD hardware
Topic: network doesn't transmit MAC addresses
Replies: 7
Views: 908

Re: network doesn't transmit MAC addresses

I've tried to change IP of Ovislink to 10.0.0.247 but no change - still no downloadability from PC ... Isn't the problem with this type of addresses? Should I try 192.168.1.x? Or should help 10.0.1.x? mask is 255.255.255.0.
by DeIM
Mon Oct 19, 2009 4:26 pm
Forum: RouterBOARD hardware
Topic: network doesn't transmit MAC addresses
Replies: 7
Views: 908

Re: network doesn't transmit MAC addresses

When I use command arp -a I see MAC adresses on local wired network right but wireless connection makes troubles. wlan1: 10.0.0.249 [mac of ether1] dynamic ether1: 10.0.0.254 [mac of ether1] dynamic isn't this problem? I have new R433AH with ROS 3.25 and there is the same problem (connected to ether...
by DeIM
Sun Oct 18, 2009 4:57 pm
Forum: RouterBOARD hardware
Topic: network doesn't transmit MAC addresses
Replies: 7
Views: 908

network doesn't transmit MAC addresses

Hi, My main AP is Mikrotik 411AH ROS 3.22 I've problem. When I use command arp -a I see just client AP MAC 10.0.0.26 mac1 dynamic 10.0.0.45 mac2 dynamic 10.0.0.47 mac2 dynamic mac1 belongs to AP-client Ovislink (192.168.1.247) not to 10.0.0.26, similar to mac2 (it's Straightcore) (192.168.1.250) is ...