Community discussions

MUM Europe 2020

Search found 31 matches

by seany
Fri Nov 15, 2013 11:03 pm
Forum: General
Topic: Switching with RouterOS / CRS Questions
Replies: 81
Views: 44073

Re: Switching with RouterOS / CRS Questions

Ok, I figured out why I am getting slow speeds. It's a 10mbit port as part of the switch group (VoIP adapter). Not figured out how to fix it as of yet.
by seany
Thu Nov 14, 2013 11:18 pm
Forum: General
Topic: Switching with RouterOS / CRS Questions
Replies: 81
Views: 44073

Re: Switching with RouterOS / CRS Questions

Ok, something weird... I am seeing RX/TX overflows and pauses between the RB450G and CRS. I managed to temporarily fix this, presumably there is some sort of bug. In /interface ethernet switch vlan, I attempt to set isolation-profile=isolated (through winbox). Upon hitting apply it immediately switc...
by seany
Thu Nov 14, 2013 7:08 pm
Forum: General
Topic: Switching with RouterOS / CRS Questions
Replies: 81
Views: 44073

Re: Switching with RouterOS / CRS Questions

Please let us know what you are trying to do, and what didn't work exactly. Hi Normis, I have attached a badly drawn diagram which should explain what I'm trying to do. Essentially I just want 2x trunk ports and a couple of access ports. CRS.png The example on the Wiki just doesn't seem to work. I ...
by seany
Thu Nov 14, 2013 5:13 am
Forum: General
Topic: Switching with RouterOS / CRS Questions
Replies: 81
Views: 44073

Re: Switching with RouterOS / CRS Questions

Over 5 hours in trying to get this to work too...
by seany
Fri Nov 30, 2012 10:19 am
Forum: General
Topic: Buy license for RouterOS 6
Replies: 6
Views: 1317

Re: Buy license for RouterOS 6

Ok, well wrong terminology I guess. It is called a "prepaid key". My question still stands.
by seany
Thu Nov 29, 2012 4:09 pm
Forum: General
Topic: Buy license for RouterOS 6
Replies: 6
Views: 1317

Re: Buy license for RouterOS 6

Hello,

I would like an official answer from MT on this one. I purchased a L4 licence many, many moons ago - around version 3 time - but never activated it. If I activate it on version 6 (release) will it have upgrade rights to 7? What about on 6 (release candidate) - up to 7.x too?
by seany
Thu Sep 20, 2012 9:47 am
Forum: General
Topic: L2TP problem
Replies: 16
Views: 4744

Re: L2TP problem

Oh it still exists. I get it weekly if not more and it's very frustrating. It fails to remove other stuff like dynamic bridges too. I get this with L2TP clients and I'm also sure I've had it with PPP and VRRP. Been affected by this for well over a year and still no fix...
by seany
Wed Feb 15, 2012 6:13 am
Forum: General
Topic: possible bug 1:1 NAT address pool setting on hotspot ignored
Replies: 4
Views: 946

Re: possible bug 1:1 NAT address pool setting on hotspot ign

Well, my previous solution has reached it's limits now. It cannot scale anymore and RIPE will not approve more IPs as it's too wasteful. MikroTik, will you please look into implementing this? If you can do it for unauthed clients then please - an option for authed clients would be great too! The sim...
by seany
Thu Apr 28, 2011 12:16 am
Forum: General
Topic: VRRP and IPv6
Replies: 3
Views: 2798

Re: VRRP and IPv6

Hi guys,

From some brief this appears to be working OK now in 5.2

Can anyone else confirm this is fixed?
by seany
Wed Apr 27, 2011 11:49 pm
Forum: General
Topic: 5.x routing cache bug (?) - dropped packets, lost network
Replies: 28
Views: 9823

Re: 5.x routing cache bug (?) - dropped packets, lost networ

Hello,

This sounds exactly like what is happening to a friend. We'll try to reproduce on 5.2!
by seany
Fri Apr 15, 2011 11:38 pm
Forum: General
Topic: VRRP and IPv6
Replies: 3
Views: 2798

Re: VRRP and IPv6

Did you ever solve the checksum error?

I'm experiencing similar. I temporarily resolved this by removing VRRP (with reboots required between steps) and adding back with exactly the same settings.

However, it started acting funny again and now back to square 1 :(
by seany
Tue Feb 08, 2011 1:34 pm
Forum: General
Topic: RouterOS v5rc8
Replies: 110
Views: 20031

Re: RouterOS v5rc8

Everyone who has unresolved problems listed in this topic, please email support to request latest test build of RouterOS so we know if your particular issue is fixed.
I did e-mail in (twice) regarding the port flapping issue and no reply at all. I did this on the 3rd of this month.
by seany
Sun Feb 06, 2011 8:33 pm
Forum: General
Topic: 5.0RC5 Ethernet ports flapping on two different RB-750s
Replies: 31
Views: 9239

Re: 5.0RC5 Ethernet ports flapping on two different RB-750s

I can confirm that this port flapping issue is fixed when downgrading to 4.16!

Definitely a 5.x issue only :(

I'd be happy with using 4.16 if VRRP worked...
by seany
Thu Feb 03, 2011 12:02 pm
Forum: General
Topic: RouterOS v5rc8
Replies: 110
Views: 20031

Re: RouterOS v5rc8

Still getting the Ethernet port flapping issue on RB750 :(

Can you guys confirm if this is software or hardware yet?
by seany
Mon Jan 24, 2011 1:07 pm
Forum: General
Topic: No NTP in RB750 combined package
Replies: 13
Views: 5392

Re: No NTP in RB750 combined package

Ugh!!! No wonder I never saw it - I feel embarrassed now.

Why was it renamed?
by seany
Mon Jan 24, 2011 12:57 pm
Forum: General
Topic: No NTP in RB750 combined package
Replies: 13
Views: 5392

Re: No NTP in RB750 combined package

No, no it really isn't:

Image

Remember this is 5.x not 4.x as in your screenshot...
by seany
Sun Jan 23, 2011 6:47 pm
Forum: General
Topic: No NTP in RB750 combined package
Replies: 13
Views: 5392

Re: No NTP in RB750 combined package

Hello,

Unfortunately it's not! Only appears after installing the package :(
by seany
Sun Jan 23, 2011 1:26 pm
Forum: General
Topic: No NTP in RB750 combined package
Replies: 13
Views: 5392

No NTP in RB750 combined package

Hello MikroTik, One small annoyance I always encounter with upgrading to a new version is having to then re-install the ntp package to run an ntp client. It is particularly annoying to have no ntp client where the clock resets on every boot... I thought it used to be included in the combined package...
by seany
Sun Dec 27, 2009 7:59 pm
Forum: General
Topic: possible bug 1:1 NAT address pool setting on hotspot ignored
Replies: 4
Views: 946

Re: possible bug 1:1 NAT address pool setting on hotspot ignored

I got fed up with the back and forth and instead just got a public /24 to share between 3 hotspots and disabled 1:1 NAT instead.

Not ideal because of IP wastage from unauthenticated clients but it is better than nothing :)
by seany
Sun Dec 06, 2009 5:00 pm
Forum: General
Topic: possible bug 1:1 NAT address pool setting on hotspot ignored
Replies: 4
Views: 946

Re: possible bug 1:1 NAT address pool setting on hotspot ignored

The "adress-pool" fields in hotspot and hotspot user profiles dynamically creates 1:1 NAT rules on the fly. An example would be two hotspot interfaces each with their own external subnets: hotspot #1: 1.1.1.1/24 hotspot #2: 2.2.2.2/24 Now, say we have 2 pools set up: external-pool-1: 1.1.1.10-1.1.1....
by seany
Fri Dec 04, 2009 11:10 pm
Forum: General
Topic: possible bug 1:1 NAT address pool setting on hotspot ignored
Replies: 4
Views: 946

possible bug 1:1 NAT address pool setting on hotspot ignored

Hello, I am having an issue where the 1:1 NAT address pool settings are ignored when set on hotspot. It works fine and well for trial users, but for static users where address pool in their user profile is set to 'none' it does not take default settings from the hotspot and instead the user is logge...
by seany
Thu Oct 22, 2009 3:11 pm
Forum: General
Topic: Dhcp and hostpot "dynamic address-list"
Replies: 6
Views: 1501

Re: Dhcp and hostpot "dynamic address-list"

I do not see address-list in hotspot profiles.

Or anywhere apart from adding static leases!
by seany
Thu Oct 22, 2009 3:10 pm
Forum: Wireless Networking
Topic: ONe to One Nat via hotspot
Replies: 21
Views: 6627

Re: ONe to One Nat via hotspot

I saw this, but I do not see address-list in hotspot profiles.

Or anywhere apart from adding static leases!
by seany
Tue Oct 20, 2009 9:07 pm
Forum: Wireless Networking
Topic: ONe to One Nat via hotspot
Replies: 21
Views: 6627

Re: ONe to One Nat via hotspot

Hello,

Is this what the new dynamic address-list in 4.1 does? If so how do I use it?
by seany
Mon Oct 19, 2009 3:08 am
Forum: Wireless Networking
Topic: ONe to One Nat via hotspot
Replies: 21
Views: 6627

Re: ONe to One Nat via hotspot

The simplest explanation of what I desire to do would be for the following options in ip hotspot user profile:

address-pool (name | none | inherit from hotspot; default: none)
by seany
Mon Oct 19, 2009 2:49 am
Forum: General
Topic: pppoe load 100% processor
Replies: 6
Views: 1022

Re: pppoe load 100% processor

Hello,

For what it's worth I have seen this too on 3.29 and 4.0 (RB750)

This happens to us when PPP drops - not sure why and don't want to try debug on a production system :(
by seany
Mon Oct 19, 2009 12:58 am
Forum: Wireless Networking
Topic: ONe to One Nat via hotspot
Replies: 21
Views: 6627

Re: ONe to One Nat via hotspot

Hello, Is it possible to set the one to one nat pool for authorised clients *outside* of the hotspot user profiles? I ask this because I have multiple hotspots running over different VLANs, each of which requires their own subnet HOWEVER the users themselves are able to login via all hotspots. To cl...
by seany
Sat Oct 10, 2009 9:42 pm
Forum: General
Topic: Upgrade Hotspot 3.23 -> 3.28: Login broken
Replies: 36
Views: 6631

Re: Upgrade Hotspot 3.23 -> 3.28: Login broken

Any updates? Anyone traced the cause yet?
by seany
Sat Oct 03, 2009 7:15 pm
Forum: General
Topic: e-mail tool authentication error/bug?
Replies: 3
Views: 1983

e-mail tool authentication error/bug?

Hello, I have set up email with the following settings: server: mail server ip port: 25 from: network@mydomain.com I can send e-mail to anything@mydomain.com fine as expected using: /tool e-mail send to=sean@mydomain.com body="Testing" subject="Testing" E-mail to external domains fail as expected, b...
by seany
Fri Oct 02, 2009 12:25 am
Forum: General
Topic: Upgrade Hotspot 3.23 -> 3.28: Login broken
Replies: 36
Views: 6631

Re: Upgrade Hotspot 3.23 -> 3.28: Login broken

Phew! Glad to see this is a bug and not something I've done wrong as I am also seeing this error :( It appears to be something funky happening with the 1:1 NAT (i.e. Address Pool is set). Hopefully a fix is released soon and I can almost say the hotspot is ready for use :) Then you could at least s...
by seany
Thu Oct 01, 2009 11:39 pm
Forum: General
Topic: Upgrade Hotspot 3.23 -> 3.28: Login broken
Replies: 36
Views: 6631

Re: Upgrade Hotspot 3.23 -> 3.28: Login broken

Phew! Glad to see this is a bug and not something I've done wrong as I am also seeing this error :(

It appears to be something funky happening with the 1:1 NAT (i.e. Address Pool is set).

Hopefully a fix is released soon and I can almost say the hotspot is ready for use :)