MikroTik

Zapnologica

Connect the fibre to your core router then connect the switches to router with cable and connect the APs to your switch, bridge the Aps and get the same SSID for all of them In router run a pppoe server and make a account for client or you can other config that you like for your network My only iss...

Zapnologica

Good day, I am looking for a system to help me effectively manage a shared fibre line in an apartment block of 20 - 30 flats. The idea is to run Cat5e Ethernet cable to each apartment to a central network point. Then run a 30 - 50 Mbps fibre line to that cabinet and effectively share it to each unit...

Zapnologica

Im also having trouble.

I have opened port 500 UDP

but i cant find protocol type ESP?

Zapnologica

Apple has removed PPTP VPN in their latest IOS update. So if you are using that you have to migrate over to Ipsec or other encrypted VPN technology.

Zapnologica

I recently needed to create queues for DHCP entries, and I used a much simpler solution... The following script is applied as lease-script: :local queueName "Guest $leaseActMAC"; :if ($leaseBound = "1") do={ /queue simple add name=$queueName parent=GUESTS place-before="Guest STATIC" target=($leaseA...

Zapnologica

Thanks,

I have implemented this. However for some reasons my sip trunks seems to be having trouble with registering.

Could I be missing something the would cause the SIP packets or protocol to not be caught by that mangle rule?

Zapnologica

Please can someone help me. I am struggling with something so simple. I have my mikrotik as my main router in the office. Currently all traffic is NATed out of my PPPoE_1 Client connection. I have recently added a VoIP PBX to the network. So I have obtained another ADSL line, and set it up as PPPoE_...

Zapnologica

Thank you so much for saying i must add a dhcp client on the interface.

I have been searching for a good hour now and no where does it say to add a dhcp client to the interface.

Works like a charm now.

Zapnologica

Are there any work a rounds or solutions to this? From my understanding, If the 3G modem on the usb is the main internet connection. I cannot remotely reboot the router because when it power back on there will be no modem? I am also having trouble getting the PPP Client working. I plugged the usb in...

Zapnologica

This is no good,

I also just bought the RB2011UiAS purely for USB modem support.

My usb is also not showing up.

Has this hardware problem possibly been rectified on any revisions or newer models?

Would a usb Hub inline help solve this problem?

Zapnologica

I have a number of sites in multiple locations. Each site has a Mikrotik router as the min gateway with its own public internet connection. My goal is have each router be a VPN client to a single Host, somewhere in the cloud. So basically I want to create a single network between all my sites, purel...

Zapnologica

Does script and scheduler not run the same scripting language?

Ok sweet, It is working now in scheduler.

Zapnologica

This works in the terminal but not in a script?

am I doing something wrong? im running v6.26

/interface pppoe-clinet disable Test

if I put that in a script and click run, nothing happens, put it in the terminal and it disables the interface?

Zapnologica

Any Ideas on what that specific script might look like? I haven't got much experience with the scripting language.

Zapnologica

Good day, I have a weird case in my one clients mikrotik. This is more of a work around than a solution but it will be quicker for me to do this. I am routing voip data out of a different gateway. However my VoIP only starts routhign through the other line after I disable my primary internet line. S...

Zapnologica

Does this script still work with V6.19 ?

I am trying to implement this script again and I cant seem to get it to work.

Zapnologica

Im not sure if I am just being daft, or if it is a change in the new winbox. In the old version of winbox I was able to click exit in the bottom of the left menu, and when I reconnected to that router box again it rembered all the windows I had open etc. I cant seem to get this working in the new wi...

Zapnologica

Also, Could there be two mac addresses for one user profile?

Say Phone and laptop? Or Wireless / Wired adapter same user but different devices.

Zapnologica

Can you elaborate on that?

So can I basically have the following scenario?

If an unknown mac occurs, user the Guest user profile is used,

Otherwise I can manually add / assign macs to different profiles?

Zapnologica

How can I bind a certain IP / mac address to a hotspot user so that they do not have to physically login every time?

I know you can bypass by a mac address but then that data is not accounted for.

Is there a way and if so how do I go about doing it? This would make my life allot easier.

Zapnologica

Did any of you ever find the issue?

I am experiencing this issue now on a hotspot I set-up for a bead and breakfast?

Latest version of Router OS, And running hotspot without ssl cert.

Zapnologica

Thanks for your response, I have attached an image of the error which I get, Hotspotsslerror.jpg However I dont think that having an ssl cert on the hotspot is the issue? This error doesnt occour when I try got to my hotspots page using ssl., If I connect to the wireless, (Not Logged in) and My brow...

Zapnologica

Good day, I just set-up a hotspot the other day, So far it is all working great except for the fact that if a suer goes to a https site before logging in. they receive a ssl error and are NOT redirected to the login page. But if they go to a http:// site it redirects them. What am I missing here? Is...

Zapnologica

I am looking for a similar solution.

did you come right with this?

I want to email a user when a gateway is un-accessible or the route switches to the next distance.

Zapnologica

Thanks for your reply and input.

Pitty that I am not able to get an exact answer. But you have helped send me in the correct direction.

Thanks

Zapnologica

Good day, I am looking at buying a rb with the intent of putting a 3G backup. I have looked at the hardware supported list and I dont see the Huawei E3131 modem there. 1: Will this work with the Mikrotik? 2: If not is there a way for me to somehow get it supported? I just wanted to check before I go...

Zapnologica

Are you wanting to store these values on the actual RB, or on a pc some where. Cause you have two options. 1: use the mikrotik to make a Virtual comport, Which you then run a client software on your pc, wich then allows you to get access to the ardruino. It basically makes a pipe, from the pc to the...

Zapnologica

Ok, So I have been doing some more investigating into the issue, and I think I mayb have found the cause, My primary line and my VoIP line are from the same provider. Below is the address I have received from them: admin@Mikrotik Switch] /ip address> print Flags: X - disabled, I - invalid, D - dynam...

Zapnologica

Shouldn't my firewall block every port unless I have opened it?
Either with a nat rule or simply by masquerading?

Zapnologica

Ok thanks,

While Im at it,

What other important firewall rules should I have on my router?

Zapnologica

Yes Thanks,

I figured that one.

So I just duplicate that rule for my 3 public interfaces.

Zapnologica

Could I replace not LAN with the public interface name?

Zapnologica

How Do I do that?

Does this mean that some one is using my router as a DNS server?

I have added a temp firewall rule to drop incoming to port 53, But then will this not disable me to do dns resolution as well?

Zapnologica

I noticed something weird earlier today, My one dsl line is current not active (ie there are no devices routing through it). It is my backup line. But I noticed every second there was a full upload spike on my PPPoE interface. I packet sniffed the traffic and I got the following: odd traffic.jpg I d...

Zapnologica

Good day, I really hope that some one can help me here. I have been struggling for about a week now at a client trying to get thier PBX to use a separate line. Summary of my problem: What I have done: - Setup a firewall list off all ips to be marked to ues ISP2 - Added a mangle rule, prerouting, src...

Zapnologica

OK I have been testing and my routing seems to be working correctly. I added a desktop computer to my mangle rule and it can use ISP2 happily. But now I still have not solved my issue, The main reason for this was to make my voip pbx run on the second line. The minute I switch over the pbx to use is...

Zapnologica

Sorry, My question was abit ambigious. What i mean is: I have two routes: 1: no packet mark, distance 1, gateway = isp1 2: packet mark "Voip", distance 2, gateway = isp2 Now I mark traffic in MANGLE prerouting from src address 192.168.1.30 with a route mark of "Voip" What stops these packets from go...

Zapnologica

Ok yes I can find my routes there,

But how do I determine / tell it which route to go out?

I need to give it a routing mark or something to that effect dont I?

Zapnologica

This is great.

Thank you so much,

Where do you change the routing? Or how do you decide your routing?

I cant see in the script which part does that?

Zapnologica

Maybe you can use two different addresses for fetching and route each thru the corresponding gateway. Then you will know both ip addresses. Or always change the routing before fetching. Then one address will be sufficient. How would I use two different addresses? Does dyndns have multiple IP addres...

Zapnologica

the theory is simple: supposed: 1) no one other settings are wrong 2) all work flawlessly 3) there are no other rule than contraddict you can 1)You must mark route on prerouting chain coming from the source you want redirected. 2)on route table you can add 0.0.0.0/0 --> IP isp2 where routing mark=t...

Zapnologica

Any ideas on how to possibly do this.

I need to achieve this, as I am routing my SIP trunks out of a different gateway, and they require a host name so that they can reverse connect.

So ie my one script needs to update the VoIP gateway, and the other script the normal internet gateway.

Zapnologica

Ok I currently have what you have mentioned.

I have finally compiled the complete export and attached it,

Thanks for the help,
I appreciate it allot.

Zapnologica

If not the way im doing it, there must be some type of way to do this?

Zapnologica

I have setup a PPTP server, but I am having no luck connecting to it from my phone. I enabled PPTP Server, Added A PPTP Binding server , added 2 users under secrets, configured a profile for me using a ip pool. I can connect on my windows 8 desktop, but for some reason my windows 8 laptop and my and...

Zapnologica

I can't some how add a packet mark in the scripts and then route it out the correct interface? Or something to that effect?

Zapnologica

I have two dyndns updater scripts, I want one to update the one gateway / interface and the other to do the other gateway / interface What do I need to change in the scripts to specify which one to update? Here is my script (Both are the same except for user and password) # Set needed variables :loc...

Zapnologica

Im also looking at implementing a simple VPN for ipad and android access.

I have followed a tutorial on PPTP Server but my windows client always gives em an 800 Error? I Will be watching out for a link or something.

Zapnologica

I did do that at first but it was pretty large. Thanks for the pw alert. I didnt notice that. But even if some can explain the theory to me and I will apply it. I want to route one client through a different internet gateway. So my whole network users gateway1 and 192.168.1.30 uses gateway2. How do ...

Zapnologica

Sorry, Im running a CRS125-24G-1S [admin@Mikrotik Switch] /ip firewall> export compact # may/24/2014 19:54:28 by RouterOS 6.13 # software id = 06KF-35VW # /ip firewall filter add chain=input comment="default configuration" protocol=icmp add chain=input comment="default configuration" connection-stat...

Search found 594 matches