Community discussions

Search found 390 matches

  • 1
  • 2
by jspool
Tue Sep 17, 2019 12:42 am
Forum: RouterBOARD hardware
Topic: RB4011 Odd Behavior
Replies: 4
Views: 836

RB4011 Odd Behavior

RB4011iGS+ 6.44.5 (long-term) I logged in via Winbox and could see the CPU was 25% for no apparent reason, however interface & firewall pages did not load any data.    Performed a reboot, and it took 7 minutes for it to fully boot. No Interface link lights until 7 minutes in and it started working, ...
by jspool
Wed Aug 28, 2019 1:27 am
Forum: General
Topic: Suggestion: VPN over ICMP
Replies: 2
Views: 546

Re: Suggestion: VPN over ICMP

Hello From high-level point of view, there would be little difference between udp. And high stream of large icmp packets would be a red flag on it's own. Furthermore, some networks / routers perform icmp "optimisation" / rate limiting, which would result in high packet loss. So far from stealthy. P...
by jspool
Wed Aug 07, 2019 6:43 pm
Forum: RouterBOARD hardware
Topic: RB4011 Meltdown
Replies: 4
Views: 1189

Re: RB4011 Meltdown

Looks like lightning damage to Port4.
In this case only port 1 and port 6 were used.
WAN=1
LAN=6

Mikrotik has instructed me to RMA so they can inspect it further. Replacement 4011 plugged in the exact same way and configured the same has been working flawlessly.
by jspool
Fri Aug 02, 2019 4:48 am
Forum: RouterBOARD hardware
Topic: RB4011 Meltdown
Replies: 4
Views: 1189

RB4011 Meltdown

I installed a brand new RB4011 at a customer location. Later that same day I started getting alerts that the location was offline. I returned to the site today and the RB4011 was insanely hot and would not boot. It had a power led but no link lights on any port. It was plugged into a surge protected...
by jspool
Tue Jun 04, 2019 6:09 am
Forum: Scripting
Topic: Portknocking by script.
Replies: 9
Views: 2750

Re: Portknocking by script.

Allow trusted DDNS on VPN server. Script the mAP to update a DDNS record on boot up and then establish the VPN connection. No need to knock on your own door unless you like secret handshakes. You can also make a script in the mAP that updates the DDNS to a non public IP when your done using it in ca...
by jspool
Fri Mar 01, 2019 8:17 am
Forum: General
Topic: inconsistent speeds across mulitple hops [SOLVED]
Replies: 3
Views: 382

Re: inconsistent speeds across mulitple hops [SOLVED]

Unless you're running AirFiber the wireless links are running half duplex. "were talking wireless not the Ethernet link" multi-hop half duplex wireless backhauls annihilate TCP throughout as it was never designed for latency. Speed test from each end of your network with UDP and then try with TCP an...
by jspool
Wed Dec 19, 2018 7:48 pm
Forum: Wireless Networking
Topic: RBLHGG-60ad
Replies: 1
Views: 337

RBLHGG-60ad

I am inquiring as to any of you that have deployed the PTP RBLHGG-60ad at a distance of 200 Meters. My goal is for the link to survive rain fade. Will these have any chance of staying connected with a small layer of ice or snow at 200 Meters? Trying to see if I need to have a 5GHz PTP as a failover....
by jspool
Fri Nov 30, 2018 5:51 am
Forum: General
Topic: Wrong "Last Link Down Time" in Winbox
Replies: 17
Views: 2680

Re: Wrong "Last Link Down Time" in Winbox

I also notice this on some of my VPN clients. Many show "Last Link Up Time" over a month in the future.
by jspool
Fri Nov 30, 2018 2:48 am
Forum: Scripting
Topic: Traccar GPS http post advice
Replies: 11
Views: 1761

Re: Traccar GPS http post advice

v6.44beta37 will have:

*) gps - added "coordinate-format" parameter (CLI only);

ddmm will be an option.
Thanks Normis!
by jspool
Mon Nov 26, 2018 6:32 pm
Forum: Scripting
Topic: Traccar GPS http post advice
Replies: 11
Views: 1761

Re: Traccar GPS http post advice

https://forum.mikrotik.com/viewtopic.php?f=9&t=137114&p=697697&hilit=gps+api#p697348 When Mikrotik updates the GPS package and enables it to output the location data to a friendly format it should work fine without requiring a middleman server to translate the data. Currently I use Particle Electron...
by jspool
Thu Nov 15, 2018 5:58 pm
Forum: Scripting
Topic: GPS http send to GpsGateServer script
Replies: 17
Views: 3039

Re: GPS http send to GpsGateServer script

External antenna for LtAP GPS works great. I haven't used external antennas for the LTE yet as it seems to work great with the built in antennas for the current application.
by jspool
Mon Nov 12, 2018 6:25 pm
Forum: Scripting
Topic: GPS http send to GpsGateServer script
Replies: 17
Views: 3039

Re: GPS http send to GpsGateServer script

You are right. We already have this in our ToDo, and will try to make it, now that LtAP mini exists.
Excellent news Normis! Supports response via email a while back was not that positive at all. Glad to hear its in the ToDo list.
by jspool
Mon Nov 12, 2018 1:22 am
Forum: Scripting
Topic: GPS http send to GpsGateServer script
Replies: 17
Views: 3039

Re: GPS http send to GpsGateServer script

Especially after releasing hardware with built in GPS like the LTAP it should be apparent that the GPS package needs some attention. Mikrotik needs to devote a couple hours to the GPS package and output the data in a usable format that does not require a middleman server to convert the Mikrotik data...
by jspool
Fri Nov 02, 2018 11:01 pm
Forum: General
Topic: MTU Question
Replies: 2
Views: 356

Re: MTU Question

When using L2TP + ipsec you can't be sure, that the packet is not fragmented, even if you specifically restrict fragmentation of the original packet. The original packet first packed into l2tp (that can, by the way, also perform fragmentation and defragmentation, but only if asked to), then it is p...
by jspool
Fri Nov 02, 2018 9:21 pm
Forum: General
Topic: MTU Question
Replies: 2
Views: 356

MTU Question

When pinging across a L2TP tunnel w/ ipsec enabled I can send packet size of 1450 with no fragmentation.
When I try to do a UDP Mikrotik bandwidth test I have to set Tx size to 1400 to get the max speed of 111Mbps Otherwise with Tx size at 1450 it only gets 19Mbps,

Whats the reason for this?
by jspool
Tue Oct 23, 2018 6:46 pm
Forum: Wireless Networking
Topic: Wireless Wire 60Ghz PTP link: weather problems?
Replies: 7
Views: 1730

Re: Wireless Wire 60Ghz PTP link: weather problems?

Hi we using wapg for last 3 months on 120m and LHG60g on 900m for last month we based in ireland so u can imagine we have lots of fog and rain and after days os alignment they finally working perfect all was down to latest stable version of router os we had rc versions and routers crashed couple of...
by jspool
Sat Oct 20, 2018 8:55 am
Forum: RouterBOARD hardware
Topic: LTAP
Replies: 0
Views: 437

LTAP

I am curious as to why the LTAP would not have a voltage monitor? It seems like a perfect candidate for use in vehicles and it would be really handy to monitor battery voltage. And the GPS package could really use some love. Output format is not very friendly. Would be nice to upload GPS data direct...
by jspool
Mon Oct 08, 2018 5:46 am
Forum: General
Topic: Router is infection by virus coinhive
Replies: 4
Views: 6669

Re: Router is infection by virus coinhive

If its ever been hacked or suspected of being hacked then you need to Netinstall the current RouterOS version. Use a packet capture tool and you should be able to narrow down the source if its not the Mikrotik.
by jspool
Mon Jul 16, 2018 12:46 am
Forum: RouterBOARD hardware
Topic: CRS354-48P-4S+2Q+ Dimensions
Replies: 5
Views: 1810

CRS354-48P-4S+2Q+ Dimensions

Does anyone have the depth of the new CRS354-48P-4S+2Q+?

I am curious if it will fit into some customer wall mount racks.
by jspool
Sat Jun 09, 2018 11:08 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154722

Re: RouterOS v7.0 beta1 - when?

I'm more excited that they are hiring Android & iOS programmers as well as mobile application WEB application programmers. Some native management apps would be very nice. https://darbs.mikrotik.com/darbs/ When they are ready they will release the newer RouterOS. Their new building is more conducive ...
by jspool
Sat Jun 09, 2018 10:52 pm
Forum: General
Topic: Suggestion of RouterOS upgrade by X86 system
Replies: 5
Views: 617

Re: Suggestion of RouterOS upgrade by X86 system

It sounds like more of a configuration problem vs a hardware problem. If you cant determine the cause of latency now then changing hardware wont be accomplishing anything. tool profile allows you to see the routers resource usage to determine if its being overloaded in some way. Too many firewall ru...
by jspool
Sat Jun 09, 2018 10:45 pm
Forum: RouterBOARD hardware
Topic: 10Gb SFP+ hardware
Replies: 3
Views: 2257

Re: 10Gb SFP+ hardware

Why bother with DAC? Transceivers are not much these days.

I use Intel X520 SR1 (comes with Intel transceiver)connected to CRS317-1G-16S (MW-SX+MM-US transceiver) using an actual fiber patch cable as it was intended.
by jspool
Sat Jun 09, 2018 10:36 pm
Forum: General
Topic: progaram get any mikrotik system usernam and passowrd in 3 second
Replies: 35
Views: 6356

Re: progaram get any mikrotik system usernam and passowrd in 3 second

Funny how people are so quick to post an issue without bothering to check to see if its already been discussed. Anyone exposing management ports to the public facing Internet deserves whatever comes their way. Attacks from LAN to router and from WAN to router are easily prevented by only allowing tr...
by jspool
Thu Jun 07, 2018 10:34 am
Forum: Beginner Basics
Topic: Mikrotik bridge infected by conficker? [SOLVED]
Replies: 9
Views: 1428

Re: Mikrotik bridge infected by conficker? [SOLVED]

Can't tell why I have been running the old version. Wasn't aware that there have been issues with the old version, and the units have just worked well..... If you have management services enabled on public facing devices its not even a question as to if one should stay up to date. If you aggressive...
by jspool
Thu Jun 07, 2018 10:20 am
Forum: General
Topic: HELP ME PLEASE!
Replies: 8
Views: 1077

Re: HELP ME PLEASE!

Was it running a vulnerable RouterOS version? If so you probably got locked out by the attacker. viewtopic.php?f=21&t=134776
by jspool
Fri Jun 01, 2018 11:24 pm
Forum: Wireless Networking
Topic: How to install airodump-ng on mikroitk device
Replies: 3
Views: 1194

Re: How to install airodump-ng on mikroitk device

You have used the scan feature right? it shows nearby wireless devices. But I think you may be after something else :shock:

For everything else you can use Kali Linux or utilize a https://www.wifipineapple.com/pages/tetra
by jspool
Fri Jun 01, 2018 11:16 pm
Forum: General
Topic: The security flaw for Hajime is closed by the firewall
Replies: 37
Views: 16979

Re: The security flaw for Hajime is closed by the firewall

If you have anything Internet facing you must be vigilant. Definition of vigilant : alertly watchful especially to avoid danger It is truly surprising that so many are: 1. Not up on the current threat landscape. 2. Fail to implement basic firewall restrictions on management services. 3. Show surpris...
by jspool
Thu May 31, 2018 7:57 pm
Forum: RouterBOARD hardware
Topic: LtAP mini - does built-in GPS have 1PPS support?
Replies: 1
Views: 665

Re: LtAP mini - does built-in GPS have 1PPS support?

That would be interesting to know if they plan on adding PPS.

According to the Wiki:
Note: The time is not stratum 1 as RouterBOARD devices do not have PPS implemented
by jspool
Thu May 31, 2018 9:00 am
Forum: General
Topic: Do haplite only work with 5v power cable
Replies: 3
Views: 421

Re: Do haplite only work with 5v power cable

the original power cable suddenly broke after few power outage Well the cable wont physically break due to a power outage. So maybe you had a power surge that fried your power supply. In that case try powering with another power supply of the same voltage and amperage and see if it will work. If it...
by jspool
Thu May 31, 2018 8:56 am
Forum: General
Topic: PCI Compliance
Replies: 1
Views: 379

Re: PCI Compliance

PCI scans are such a joke. Just setup port scan detection and block them as they attempt to scan. They love to find any open port and consider it a fail and charge the customer more for being out of "compliance".
by jspool
Thu May 31, 2018 8:52 am
Forum: General
Topic: RB493G just started repeatedly crashing (~10 minutes)
Replies: 5
Views: 588

Re: RB493G just started repeatedly crashing (~10 minutes)

Are the capacitors shot? Are they raised or leaking from the tops? Have you tried powering with a different method? It should support POE as well as the DC plug.
by jspool
Mon May 21, 2018 9:07 pm
Forum: General
Topic: WAP LTE KIT [SOLVED]
Replies: 2
Views: 622

Re: WAP LTE KIT [SOLVED]

Have you tried the latest release candidate RouterOS? *) lte - use "/32" address for the Passthrough feature when R11e-LTE module is used;
by jspool
Mon May 21, 2018 7:51 pm
Forum: General
Topic: multi microtik management tool
Replies: 13
Views: 6196

Re: Re:

We are working on a system management tool that would have this feature.

John
Will this management system be released along with RouterOS v.7 software?
https://www.youtube.com/watch?v=izQB2-Kmiic
by jspool
Mon May 21, 2018 5:49 pm
Forum: General
Topic: multi microtik management tool
Replies: 13
Views: 6196

Re: multi microtik management tool

Ubiquiti has such a tool and it would be awesome to have for Mikrotik hardware.

HA feature without having to use scripting would be very nice as well.
by jspool
Mon May 21, 2018 5:24 pm
Forum: Beginner Basics
Topic: Mikrotik cloud remote access
Replies: 24
Views: 5515

Re: Mikrotik cloud remote access

Most LTE connections give you an IP in the 100.64.0.0/10 range. This is actually a non public IP that is used with CGNAT. As already stated the only way this typically works is if your device is setup with a VPN client that connects to a VPN server that has a publicly accessible IP address.
by jspool
Fri May 18, 2018 11:39 pm
Forum: Wireless Networking
Topic: BaseBox2 LTE problems
Replies: 2
Views: 536

Re: BaseBox2 LTE problems

SIM cards don't plug into the MiniPCI-e slot. They go into the Sim card slot. Assuming you are using a supported Modem plugged into the MiniPCI-e slot you should see the device in interface LTE.
by jspool
Fri May 18, 2018 9:15 pm
Forum: Wireless Networking
Topic: RB433 and Ubiquity XR9
Replies: 2
Views: 488

Re: RB433 and Ubiquity XR9

Assuming you mean "Ubiquiti" Also the RB433 has MiniPCI slots. If you would take the time to familiarize yourself with the XR9 and maybe even use the search feature you would get your answer in less time then it took to write your post. https://forum.mikrotik.com/viewtopic.php?t=30828 http://www.roc...
by jspool
Fri May 18, 2018 6:48 pm
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+ Bridge not showing tx [SOLVED]
Replies: 0
Views: 384

CRS317-1G-16S+ Bridge not showing tx [SOLVED]

On both current and release candidate the bridge does not show any tx traffic and it appears that ether1 is displaying the bridge tx traffic. I emailed support and provided a supout. Not sure if anyone else is seeing this as well. a8668bcbab49e364aa923e3fdebb01df.png Updated: Support says: "This is ...
by jspool
Thu May 10, 2018 10:01 pm
Forum: RouterBOARD hardware
Topic: R11e-LTE-US Issues
Replies: 1
Views: 693

Re: R11e-LTE-US Issues

For the first time I can use my RBM11G w/ R11e-LTE-US with Verizon! The latest release candidate (6.43rc11 ) resolved the issue preventing it from being able to route out via the LTE connection.
by jspool
Fri May 04, 2018 3:00 am
Forum: Forwarding Protocols
Topic: What does /ip route vrf really do?
Replies: 22
Views: 9314

Re: What does /ip route vrf really do?

@pe1chl So do the firewall filter rules apply to all routing tables by default?
by jspool
Thu May 03, 2018 10:58 pm
Forum: General
Topic: Exhaustive Trouble Shooting of no DNS via L2TP/IPSEC, NEW IDEAS welcomes [SOLVED]
Replies: 9
Views: 717

Re: Exhaustive Trouble Shooting of no DNS via L2TP/IPSEC, NEW IDEAS welcomes [SOLVED]

Are both sides using the same RouterOS version? I recently had a problem with l2tp between 6.40.8 and 6.42.1. Once I updated both to 6.42.1 it worked. Not sure if it has any bearing in your case.
by jspool
Wed May 02, 2018 2:30 am
Forum: Announcements
Topic: v6.42.1 [current]
Replies: 272
Views: 45581

Re: v6.42.1 [current]

I saw that now I can download automatically the new RB firmware with "Auto upgrade", there's also a way to auto reboot?
Also there was talk of perhaps suppressing the firmware reboot message if not needed.
There was also talk of v7
by jspool
Wed May 02, 2018 2:19 am
Forum: General
Topic: Upgrade Issue
Replies: 6
Views: 609

Re: Upgrade Issue

Yes that would be a safe procedure to update it in-place. Now that it already has been "destroyed" you can netinstall it immediately to 6.42.1 and indeed upgrade routerboot as well. The above procedure should be followed when you have other devices with such old software you want to update. are you...
by jspool
Tue May 01, 2018 11:21 pm
Forum: Forwarding Protocols
Topic: What does /ip route vrf really do?
Replies: 22
Views: 9314

Re: What does /ip route vrf really do?

Mikrotik is Linux based and Linux has support for multiple routing tables and routing rules. A VRF attaches the connected interface route to an alternative routing table so that you can have overlapping routes. Yes, this is what I know and that is why I think it works like you describe! The part ab...
by jspool
Mon Apr 30, 2018 1:31 am
Forum: General
Topic: Help: Lost access to many Mikrotiks
Replies: 2
Views: 402

Re: Help: Lost access to many Mikrotiks

Once a system is compromised you must Netinstall to ensure you have a uninfected system. Netinstall, secure it properly and commit it to a learning experience.
by jspool
Mon Apr 30, 2018 1:10 am
Forum: General
Topic: Firewall Blacklist VOIP issue
Replies: 1
Views: 314

Re: Firewall Blacklist VOIP issue

That's why Its important to whitelist trusted traffic before the blacklist drop rule.
by jspool
Sun Apr 29, 2018 1:47 am
Forum: General
Topic: Windows Port Knock Application
Replies: 24
Views: 7287

Re: Windows Port Knock Application

Even if the DDNS was compromised the attacker would have no clue what equipment you have that watches that record. I agree that compromising the DDNS itself could reveal something useful only if the VPN "server" would query the DDNS server directly. But if you update the DDNS from the hotel just be...
by jspool
Sat Apr 28, 2018 11:21 pm
Forum: Announcements
Topic: v6.42.1 [current]
Replies: 272
Views: 45581

Re: v6.42.1 [current]

Downgrading a RB1100AHx2 from 6.42.1 to 6.40.8 bricked it. Will have to make a trip to the mountain to fix that one. At least I had a backup router in place!
by jspool
Sat Apr 28, 2018 11:12 pm
Forum: General
Topic: Windows Port Knock Application
Replies: 24
Views: 7287

Re: Windows Port Knock Application

Port knocking seems like a decent approach to add an additional level of security. I used it when I first started using Mikrotik products but have since migrated to other methods. 1. DDNS (My management gear has DDNS client that updates the dynamic DNS record with the IP of the management equipment....
by jspool
Sat Apr 28, 2018 3:53 am
Forum: General
Topic: 6.43rc5 bricked RB1100AHx4
Replies: 16
Views: 2499

Re: 6.43rc5 bricked RB1100AHx4

After about 6 hours, I finally got the Routerboot menu. I'm not sure why I was never prompted (press any-key...) before. I ended up getting a stopwatch and power strip. I was powering the router and timing how long to press the reset. It ended up needed to be pressed for no less than 15 minutes. (w...
by jspool
Fri Apr 27, 2018 7:06 am
Forum: General
Topic: 6.43rc5 bricked RB1100AHx4
Replies: 16
Views: 2499

Re: 6.43rc5 bricked RB1100AHx4

Tried that.. They said it's past their coverage and to contact Mikrotik.
Mikrotik products are great when they work and if they stop working your soon in a pin ball machine being bounced around aimlessly. Perhaps things will improve with v7 :lol:
by jspool
Fri Apr 27, 2018 7:01 am
Forum: General
Topic: 6.43rc5 bricked RB1100AHx4
Replies: 16
Views: 2499

Re: 6.43rc5 bricked RB1100AHx4

You will have to Netinstall your router. If you are not being able to do that, then provide serial console output which would be made during Netinstall process.
I think if you read the whole thread you will see his console output and the fact that netinstall is not working.
by jspool
Fri Apr 27, 2018 6:49 am
Forum: General
Topic: 6.43rc5 bricked RB1100AHx4
Replies: 16
Views: 2499

Re: 6.43rc5 bricked RB1100AHx4

That's unfortunate. Crazy that its possible to brick the unit doing that. Its doubtful they include any JTAG ability. Their default response is to contact your supplier and arrange a RMA. On a side note I am curious what you think of the x4 aside from the current issue.
by jspool
Fri Apr 27, 2018 4:18 am
Forum: RouterBOARD hardware
Topic: R11e-LTE
Replies: 3
Views: 1024

Re: R11e-LTE

Using a 24V power supply on a RBM11G My R11e-LTE-US consumes 50ma at peak. Board pulls 60ma idle and 110ma when modem is tx/rx
by jspool
Fri Apr 27, 2018 3:50 am
Forum: General
Topic: 6.43rc5 bricked RB1100AHx4
Replies: 16
Views: 2499

Re: 6.43rc5 bricked RB1100AHx4

So the 15 second hold of the reset button during power up does not engage ether13 for netinstall?
by jspool
Fri Apr 27, 2018 3:39 am
Forum: General
Topic: 6.43rc5 bricked RB1100AHx4
Replies: 16
Views: 2499

Re: 6.43rc5 bricked RB1100AHx4

I assume you already tried the backup loader? -from the manual - If you start holding the Reset button before applying power, it will also load the backup RouterBOOT loader, in addition to the above actions. This may help to solve RouterBOOT issues and give you the opportunity to downgrade/ upgrade ...
by jspool
Thu Apr 26, 2018 9:47 pm
Forum: General
Topic: Windows Port Knock Application
Replies: 24
Views: 7287

Re: Windows Port Knock Application

I doubt Greg is including trojans in his files. Most likely a false positive. upload it to https://www.virustotal.com/#/home/upload and see what it finds.
by jspool
Thu Apr 26, 2018 9:16 pm
Forum: RouterBOARD hardware
Topic: R11e-LTE-US Issues
Replies: 1
Views: 693

R11e-LTE-US Issues

Anyone else ran into the following? LTE scan does not show RSSI in Winbox or terminal. It would be nice to be able to perform site surveys of carrier and signals to ascertain viability of adequate coverage for sites. R11e-LTE-US on RBM11G still does not work on Verizon unless its set to passthrough....
by jspool
Thu Apr 26, 2018 7:40 pm
Forum: Virtualization
Topic: looks like chr will never perform for me
Replies: 3
Views: 859

Re: looks like chr will never perform for me

I find that CHR runs great on XenServer.
by jspool
Wed Apr 25, 2018 9:28 pm
Forum: General
Topic: Windows Port Knock Application
Replies: 24
Views: 7287

Re: Windows Port Knock Application

I understand the use case for port knocking but I prefer using DDNS clients on mobile management devices. Set your routers to allow "ddnshostname.domain.com"
by jspool
Tue Apr 24, 2018 5:46 pm
Forum: Beginner Basics
Topic: WiFi comparison between hAP ac2 and hAP ac
Replies: 12
Views: 12389

Re: WiFi comparison between hAP ac2 and hAP ac

My question: Where is such a big difference in suggested price, if in the WiFi coverage graph shows that the hAPac2 has better WiFi performance? Thank you for a good laugh. I truly needed that. In all seriousness those new to Mikrotik (This includes those that have possessed a Mikrotik but never re...
by jspool
Sat Apr 21, 2018 6:06 am
Forum: General
Topic: New router & AP for home use.
Replies: 3
Views: 375

Re: New router & AP for home use.

The original hAP AC works quite well. Mixed reviews on the the hAP AC 2. Mikrotik WiFi performance is as sindy stated good but not great. Personally I use two UniFI AC access points at home and use a CCR1009 with passive cooling so I don't hear a fan.
by jspool
Sat Apr 21, 2018 2:16 am
Forum: General
Topic: CRS317-1G-16S+ Fail
Replies: 2
Views: 482

Re: CRS317-1G-16S+ Fail

Netinstall the version you desire.

viewtopic.php?t=130715
by jspool
Sat Apr 21, 2018 2:01 am
Forum: General
Topic: winbox vulnerable! Unusual login to routers [SOLVED]
Replies: 44
Views: 10319

Re: winbox vulnerable! Unusual login to routers [SOLVED]

Good catch. Will be interesting to get more details. Unfortunately vulnerabilities are a fact of life these days. For the last ten years I only allow trusted IPs access to Winbox & SSH. Its never a good idea to expose unnecessary things to the Internet in hopes that they will be resilient enough to ...
by jspool
Thu Apr 19, 2018 12:42 pm
Forum: General
Topic: kid-control ideas
Replies: 9
Views: 1477

Re: kid-control ideas

It is an interesting question for sure. Perhaps they could integrate a simplified hotspot feature to limit the session time in a 24 hour span. You should post it in the feature request section.
by jspool
Thu Apr 19, 2018 11:03 am
Forum: General
Topic: kid-control ideas
Replies: 9
Views: 1477

Re: kid-control ideas

I think hotspot is probably the method that's tweakable to your needs. But making your argument based on LED's and Graphs begs the question what are they displaying? LED blinks when there is network activity. This means any activity not specific activity. Traffic graphs also display traffic. Check o...
by jspool
Thu Apr 19, 2018 9:25 am
Forum: RouterBOARD hardware
Topic: RBM11G + R11e-LTE
Replies: 18
Views: 5388

Re: RBM11G + R11e-LTE

I have a RBM11G & a R11e-LTE-US and it doesn't get the correct IP address from Verizon. It takes the gateway IP as its own and as a /32 which obviously doesn't work. It sets the default gw to the lte interface but its gets no Internet since it took the gateway IP and is not sending the default rout...
by jspool
Thu Apr 19, 2018 7:45 am
Forum: RouterBOARD hardware
Topic: RBM11G + R11e-LTE
Replies: 18
Views: 5388

Re: RBM11G + R11e-LTE

I have a RBM11G & a R11e-LTE-US and it doesn't get the correct IP address from Verizon. It takes the gateway IP as its own and as a /32 which obviously doesn't work. It sets the default gw to the lte interface but its gets no Internet since it took the gateway IP and is not sending the default route...
by jspool
Thu Apr 19, 2018 7:38 am
Forum: Wireless Networking
Topic: hAP ac^2 Problems---Extremely Poor Performance found in 2.4G and 5G WiFi
Replies: 288
Views: 60899

Re: hAP ac^2 Problems---Extremely Poor Performance found in 2.4G and 5G WiFi

A hAP AC with encryption offloading is my dream. I don't expect it to be cheaper in price or of lower build quality as it is a higher end item and not your average consumer needs encryption offloading. Historically I have learned to avoid any product that has the word "Lite" if I want a positive exp...
by jspool
Wed Apr 18, 2018 10:17 pm
Forum: General
Topic: kid-control ideas
Replies: 9
Views: 1477

Re: kid-control ideas

Powered devices connected to a network are generally communicating on the network in varying degrees. How would the router know if your kid is using it or if its a background process using the network? Run a packet capture on your network and visualize the traffic. Generally network traffic is prett...
by jspool
Wed Apr 18, 2018 10:06 pm
Forum: Scripting
Topic: Automatic Import Fails Silently
Replies: 3
Views: 430

Re: Automatic Import Fails Silently

Does the script run as the ftp user that uploaded it? If so does the ftp user have the needed permissions to execute all aspects of the script?
by jspool
Sun Apr 15, 2018 7:48 pm
Forum: Beginner Basics
Topic: look like someone trying to access my router,... [SOLVED]
Replies: 15
Views: 5299

Re: look like someone trying to access my router,... [SOLVED]

Can you paste your firewall rules? Its hard to help without seeing your rules.
/ip firewall filter export
by jspool
Sun Apr 15, 2018 4:45 am
Forum: RouterBOARD hardware
Topic: R11e-LTE Detailed Information
Replies: 5
Views: 1136

Re: R11e-LTE Detailed Information

The new ltap coming out would probably suit your needs as it has GPS and LTE.
https://www.balticnetworks.com/docs/Mik ... lte_ds.pdf

Maybe Mikrotik will list official AT commands. I have found that quite a few normal AT commands work fine with the R11e-LTE
by jspool
Sun Apr 15, 2018 2:08 am
Forum: Beginner Basics
Topic: look like someone trying to access my router,... [SOLVED]
Replies: 15
Views: 5299

Re: look like someone trying to access my router,... [SOLVED]

The service is something that is either running or not. If a service is disabled then nothing can connect to the router using that service. Also the info from JB172 would drop the traffic from the bot or person that is currently attacking your router. However those rules do not protect you router fr...
by jspool
Sun Apr 15, 2018 12:24 am
Forum: Beginner Basics
Topic: look like someone trying to access my router,... [SOLVED]
Replies: 15
Views: 5299

Re: look like someone trying to access my router,... [SOLVED]

Disable unneeded services & properly setup your firewall. There are many articles that explain the steps. All you have to do is use the search function on this forum or Google it. Basic setup from https://wiki.mikrotik.com/wiki/Manual:Securing_Your_Router /ip firewall filter add action=accept chain=...
by jspool
Sat Apr 14, 2018 1:31 am
Forum: RouterBOARD hardware
Topic: RBM11G with R11e-LTE-US Retardation
Replies: 0
Views: 576

RBM11G with R11e-LTE-US Retardation

Verizon SIM pulled from working Pepwave Max BR1 placed in the RBM11G shows up and connects fine. The problem is that its appears to be getting a /32 from the carrier. The Pepwave gets a /30 from Verizon. Both are using the VZWINTERNET APN. When using a /32 the default gw is just pointed to the lte1 ...
by jspool
Mon Apr 09, 2018 7:36 pm
Forum: General
Topic: How To Know EOIP Tunnel Status
Replies: 6
Views: 1127

Re: How To Know EOIP Tunnel Status

/interface eoip print
check for a "R" by the interface number
Running does not mean its connected to the other side or that traffic can pass. Typically I use OSPF with BFD across the EoIP and it will go up or down depending on the link state.
by jspool
Sun Apr 08, 2018 6:57 pm
Forum: General
Topic: 750g crashing [SOLVED]
Replies: 9
Views: 940

Re: 750g crashing [SOLVED]

/system routerboard upgrade.
by jspool
Sat Apr 07, 2018 10:36 pm
Forum: Scripting
Topic: Login to a server using SSH
Replies: 1
Views: 380

Re: Login to a server using SSH

Last I knew it was not possible to SSH from a RouterOS script. You will find other threads regarding this by using the search feature.
by jspool
Sat Apr 07, 2018 7:53 pm
Forum: General
Topic: 750g crashing [SOLVED]
Replies: 9
Views: 940

Re: 750g crashing [SOLVED]

Its always smart to make a backup before upgrading or downgrading. However downgrading or changing version doesn't wipe anything.
by jspool
Sat Apr 07, 2018 3:45 am
Forum: General
Topic: 750g crashing [SOLVED]
Replies: 9
Views: 940

Re: 750g crashing [SOLVED]

Downgrade to bugfix and see how it works. Current doesn't always mean stable. :)
by jspool
Sat Apr 07, 2018 3:43 am
Forum: General
Topic: suggest pppoe server centralized
Replies: 4
Views: 572

Re: suggest pppoe server centralized

CHR with good server specs & Use src nat instead of masquerade.
by jspool
Sat Apr 07, 2018 3:38 am
Forum: Wireless Networking
Topic: LAN IP Telephony on Mikrotik? Voice VLAN?
Replies: 2
Views: 1059

Re: LAN IP Telephony on Mikrotik? Voice VLAN?

Not sure what a VLAN has to do with anything? Any capable router supports creating a VLAN. You are referring to Cisco Unified Communications which is more of their PBX. Mikrotik does not have a built in PBX. There are tons of OpenSwitch or Asterisk based PBX solutions out there.
by jspool
Sat Apr 07, 2018 3:30 am
Forum: General
Topic: Please, help for Mikrotik WiFi network
Replies: 6
Views: 750

Re: Please, help for Mikrotik WiFi network

Your latest post clarifies a considerable amount. While Mikrotik can do what you require it wont be point and click like some other brands. Mikrotik is very flexible buy requires patience and time to learn how it works, understand its limitations and then learn scripting to supplement the non native...
by jspool
Fri Apr 06, 2018 6:29 am
Forum: General
Topic: Maxxed out CPU on CloudCore routers?
Replies: 4
Views: 562

Re: Maxxed out CPU on CloudCore routers?

Normally one would utilize BGP blackhole or null route with your upstream provider. also dropping offending traffic in raw table so its dropped before connection tracking.
by jspool
Tue Apr 03, 2018 1:03 am
Forum: General
Topic: Please, help for Mikrotik WiFi network
Replies: 6
Views: 750

Re: Please, help for Mikrotik WiFi network

You might consider hiring a consultant. You essentially are asking others to do work that anyone qualified would be able to figure out. The forums have lots of relevant data for those willing to learn. You would know the answer to most of your questions if you took the time to search through the for...
by jspool
Tue Apr 03, 2018 12:56 am
Forum: General
Topic: RB750R2 Runnig 6.39.2
Replies: 1
Views: 195

Re: RB750R2 Runnig 6.39.2

/system leds
set 0 interface=ether1 type=interface-status
set 1 interface=ether2 type=interface-status
set 2 interface=ether3 type=interface-status
set 3 interface=ether4 type=interface-status
set 4 interface=ether5 type=interface-status
by jspool
Sat Mar 31, 2018 2:07 am
Forum: General
Topic: Problems with mynetname.net cloud IP service DNS
Replies: 7
Views: 3851

Re: Problems with mynetname.net cloud IP service DNS

I don't think using the serial number .sn.mynetname.net is a particularly great method either. People wanting to target Mikrotik devices could pound the name servers with DNS request generators and probably successfully generate the serials with the tools that are available for pen testing. It proba...
by jspool
Thu Mar 29, 2018 7:38 pm
Forum: General
Topic: Firewall doesn't block IP ?
Replies: 12
Views: 1118

Re: Firewall doesn't block IP ?

If its a metered data plan maybe he can get a different IP. But mobile networks are not likely to offer blackhole routing for such problems. OP needs to understand that he cannot control what traffic is sent to him. That's like yelling at the sky for raining on you. Try a new IP address and run Wire...
by jspool
Thu Mar 29, 2018 6:27 pm
Forum: General
Topic: Winbox Not Detecting RouterBoard
Replies: 31
Views: 6741

Re: Winbox Not Detecting RouterBoard

Perhaps your could netinstall it without default config and see if that resolves it.
by jspool
Thu Mar 29, 2018 7:36 am
Forum: General
Topic: Winbox Not Detecting RouterBoard
Replies: 31
Views: 6741

Re: Winbox Not Detecting RouterBoard

Can you try with a switch? Maybe try connecting from another computer running W7 to see if they connect fine.
by jspool
Thu Mar 29, 2018 7:19 am
Forum: General
Topic: Firewall doesn't block IP ?
Replies: 12
Views: 1118

Re: Firewall doesn't block IP ?

I would say drop that IP in the RAW firewall table but from the screenshot you must be using an old RouterOS if you don't have RAW.
by jspool
Thu Mar 29, 2018 7:16 am
Forum: Beginner Basics
Topic: Understanding DNS on MT
Replies: 7
Views: 814

Re: Understanding DNS on MT

Generally there is not much point in using the local ISP DNS servers. Just set Google or OpenDNS servers or whatever you decide and it will work regardless of which WAN you route the traffic out.
by jspool
Thu Mar 29, 2018 7:11 am
Forum: General
Topic: Winbox Not Detecting RouterBoard
Replies: 31
Views: 6741

Re: Winbox Not Detecting RouterBoard

Have you tried connecting with an Ethernet switch between the computer and the Groove?
by jspool
Thu Mar 29, 2018 7:07 am
Forum: General
Topic: Help me decide
Replies: 11
Views: 867

Re: Help me decide

You could use an ASUS router as the OpenVPN client and either use it as router or just route your traffic to the ASUS from the Mikrotik. When Mikrotik finally makes the jump to UDP it will be a milestone. Hopefully UDP will still be around then.
by jspool
Thu Mar 29, 2018 7:04 am
Forum: RouterBOARD hardware
Topic: RB1100AHx4 Dude Edition has 5v fan pinout, but no method of using it?
Replies: 12
Views: 1234

Re: RB1100AHx4 Dude Edition has 5v fan pinout, but no method of using it?

At times it will heat nearly into the 80C range just from the sunlight, and I currently have no other method of keeping the box cool. Low tech is, sometimes, better. If most of the heat comes from sunlight, why not put it in a shade? It's just light - even a thin white plastic covering it, like an ...
by jspool
Thu Mar 29, 2018 3:02 am
Forum: RouterBOARD hardware
Topic: RB1100AHx4 Dude Edition has 5v fan pinout, but no method of using it?
Replies: 12
Views: 1234

Re: RB1100AHx4 Dude Edition has 5v fan pinout, but no method of using it?

How long before somebody tries out water cooling a Mikrotik? :D Hm... But also why not try to use heat pipes for removal of part of heat to metallic case of the router? Personally I use the https://mikrotik.com/product/CCR1009-8G-1S-1SplusPC at home which pipes the heat to the rear heatsink. The pa...
by jspool
Thu Mar 29, 2018 2:55 am
Forum: General
Topic: Connecting the same VPN over 2 gateways at the same time
Replies: 5
Views: 1162

Re: Connecting the same VPN over 2 gateways at the same time

You could probably make a script that monitors your Tx/Rx Bytes and when it reaches the max bandwidth it switches to the secondary.
by jspool
Thu Mar 29, 2018 2:47 am
Forum: General
Topic: RouterOS on APU2
Replies: 6
Views: 956

Re: RouterOS on APU2

Did you netinstall to the msata and then try booting your device? Its likelihood of working probably depends on if RouterOS has the needed drivers for the hardware.

viewtopic.php?t=96883
by jspool
Thu Mar 29, 2018 2:30 am
Forum: General
Topic: LTE NAT forwarding
Replies: 4
Views: 765

Re: LTE NAT forwarding

So your LTE provider gives you static IP's for your modems?
Do they use CGNAT?
by jspool
Thu Mar 29, 2018 2:17 am
Forum: General
Topic: Help me decide
Replies: 11
Views: 867

Re: Help me decide

Why do you have to use OpenVPN? Are you connecting site to site?
by jspool
Thu Mar 29, 2018 2:09 am
Forum: Wireless Networking
Topic: CAPsMAN iPhone problem [no answer from support for 3weeks]
Replies: 5
Views: 2211

Re: CAPsMAN iPhone problem [no answer from support for 3weeks]

Does disabling WiFi Assist in Settings, Cellular make any difference?
by jspool
Thu Mar 29, 2018 1:51 am
Forum: Beginner Basics
Topic: Problem with port forwarding for RemoteDesktop
Replies: 17
Views: 5549

Re: Problem with port forwarding for RemoteDesktop

RDP on a publicly accessible port is spooky. I typically set people up with a VPN and then they can RDP to the local IP of the Windows machine. If the remote party has a DDNS updater app on their device you could port forward only allow trusted DDNS hostnames.
by jspool
Wed Mar 28, 2018 10:59 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx4 Dude Edition has 5v fan pinout, but no method of using it?
Replies: 12
Views: 1234

Re: RB1100AHx4 Dude Edition has 5v fan pinout, but no method of using it?

How long before somebody tries out water cooling a Mikrotik? :D
by jspool
Wed Mar 28, 2018 10:56 pm
Forum: Beginner Basics
Topic: Understanding DNS on MT
Replies: 7
Views: 814

Re: Understanding DNS on MT

I think you will find that quite a few use public DNS servers and not the ones from their local provider. In that scenario it doesn't matter what route your taking. If allow remote request is enabled on the router the DNS server in dhcp server networks can be the local IP of the router and the route...
by jspool
Wed Mar 28, 2018 7:19 pm
Forum: General
Topic: Please add basic portScan tool ( port scanner scan )
Replies: 31
Views: 9809

Re: Please add basic portScan tool

+1 Please
by jspool
Wed Mar 28, 2018 7:15 pm
Forum: General
Topic: Winbox Not Detecting RouterBoard
Replies: 31
Views: 6741

Re: Winbox Not Detecting RouterBoard

So discovery is messed up but if you are on the same network and enter the IP address of the Routerboard in Winbox can you log into it?
by jspool
Wed Mar 28, 2018 7:12 pm
Forum: General
Topic: Problems with mynetname.net cloud IP service DNS
Replies: 7
Views: 3851

Re: Problems with mynetname.net cloud IP service DNS

While it's nice of Mikrotik to offer such features there are a plethora of DDNS scripts that work perfectly. he.net has free DNS including dynamic records. Setup the DDNS script and place it in dhcp-client script area so that it triggers on DHCP changes and boom its done and its in your control.
by jspool
Wed Mar 28, 2018 7:00 pm
Forum: Forwarding Protocols
Topic: Dual WAN failover - access via down link
Replies: 2
Views: 521

Re: Dual WAN failover - access via down link

You could have the same port forwards setup for each of the WAN IP's and then utilize maybe Active-Passive with Amazon Route53 with health checks and setup your Route53 DNS record with a low TTL and use WAN 1 IP as primary and when it fails health check (when it's down) it returns the WAN 2 IP addre...
by jspool
Wed Mar 28, 2018 6:51 pm
Forum: General
Topic: Winbox Not Detecting RouterBoard
Replies: 31
Views: 6741

Re: Winbox Not Detecting RouterBoard

Can this new Windows 7 computer detect any other Routerboards?
by jspool
Tue Mar 27, 2018 8:02 am
Forum: General
Topic: Winbox Not Detecting RouterBoard
Replies: 31
Views: 6741

Re: Winbox Not Detecting RouterBoard

Hope you get it working!
by jspool
Tue Mar 27, 2018 8:01 am
Forum: The Dude
Topic: Feature Request [Batch Update/ Batch Script]
Replies: 3
Views: 1218

Re: Feature Request [Batch Update/ Batch Script]

Its really not that hard to script. I have a configuration server for each model of router. The routers periodically check the version from the device page and if it is different that what they have it fetches the file from the server and installs it. Each router has an onboard script that checks to...
by jspool
Tue Mar 27, 2018 7:51 am
Forum: Wireless Networking
Topic: HAP AC^2 5.0GHz issue
Replies: 16
Views: 3210

Re: HAP AC^2 5.0GHz issue

Anyone tested throughput with IPsec? Curious to see some real world hardware accelerated goodness.
by jspool
Tue Mar 27, 2018 7:50 am
Forum: General
Topic: Winbox Not Detecting RouterBoard
Replies: 31
Views: 6741

Re: Winbox Not Detecting RouterBoard

I would update the PC and retry. Sometimes generic network drivers are replaced with the proper drivers when updated. I have only seen: Windows firewall, virtualbox network drivers, third party firewalls from Antivirus installation & generic network drivers cause issues.
by jspool
Tue Mar 27, 2018 7:39 am
Forum: Beginner Basics
Topic: WHY IP POOL Assignment Backwards
Replies: 23
Views: 2213

Re: WHY IP POOL Assignment Backwards

I know when using the Radius Framed-Pool attribute it work backwards when grabbing IPs from the pools. It would be cool if the IP-Pool had an order preference that everything would obey.
by jspool
Tue Mar 27, 2018 7:33 am
Forum: Wireless Networking
Topic: MikroTik devices allowing 2 or more wifi radios?
Replies: 2
Views: 391

Re: MikroTik devices allowing 2 or more wifi radios?

You think that they make a non barebones that does that natively? :lol:

https://mikrotik.com/product/RB435G
by jspool
Tue Mar 27, 2018 7:29 am
Forum: Beginner Basics
Topic: Problem with port forwarding for RemoteDesktop
Replies: 17
Views: 5549

Re: Problem with port forwarding for RemoteDesktop

GENERAL TAB
chain:forward
protocol:6(tcp)
dst.port:3389
ACTION TAB
Action:accept
And my remote desktop still not works:( thanks in andvance for help.
Add same rule with chain INPUT -put this rule to the top on filter section !
You don't need to add input rules for dst nat to work...
by jspool
Tue Mar 27, 2018 7:23 am
Forum: Forwarding Protocols
Topic: need to see my router on a different port
Replies: 5
Views: 753

Re: need to see my router on a different port

Would it not be better to use https to connect???
Save that for the next thread where his router gets hacked and needs to get back in ;)
But seriously glad to hear you got it working and sure its a basic question but we all started out similarly whether we want to admit it or not!
by jspool
Tue Mar 27, 2018 7:19 am
Forum: Beginner Basics
Topic: Hairpin NAT and DDNS (noob)
Replies: 12
Views: 4726

Re: Hairpin NAT and DDNS (noob)

If you can access it fine externally and not internally that's generally a masquerade issue Typically the default settings will masquerade the LAN traffic leaving ether1. However if you temporarily remove the ether1 from the rule and apply it my guess is that it will work fine. If so you should be a...
by jspool
Tue Mar 27, 2018 7:11 am
Forum: General
Topic: Monitor national traffic and overseas traffic? [SOLVED]
Replies: 5
Views: 661

Re: Monitor national traffic and overseas traffic? [SOLVED]

If you mark the traffic from and to your countries IPs using mangle and run it through a queue tree you should see the traffic. then you could mark traffic not going to your countries IPs and queue it to a different queue and you would see that traffic as well. It would be additional overhead for yo...
by jspool
Tue Mar 27, 2018 7:00 am
Forum: General
Topic: Winbox Not Detecting RouterBoard
Replies: 31
Views: 6741

Re: Winbox Not Detecting RouterBoard

Assuming that you have the latest network drivers for your Ethernet card and the firewall is allowing Winbox or is disabled it should work fine. The latest Winbox I believe is 3.12. Sometime pending Windows updates will mess stuff up until you reboot and apply them as well.
by jspool
Tue Mar 27, 2018 6:26 am
Forum: General
Topic: Winbox Not Detecting RouterBoard
Replies: 31
Views: 6741

Re: Winbox Not Detecting RouterBoard

Is your Windows 7 network set to public? If so you can either set you network to private or make an exception to allow Winbox on both public and private. Do you have some virtual network drivers installed on the windows 7 machine? I have seen in the past some network drivers installed by virtualbox ...
by jspool
Mon Mar 26, 2018 9:05 pm
Forum: Beginner Basics
Topic: Extracting more info from logs about incoming packets such as ICMP and logging them persistently on another box
Replies: 1
Views: 323

Re: Extracting more info from logs about incoming packets such as ICMP and logging them persistently on another box

Just setup the desired topics and send them to a remote syslog server. Tons of data out there on syslog.
by jspool
Mon Mar 26, 2018 8:50 pm
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 105792

Re: Blacklist Filter update script

Thanks Dave! Its always a battle protecting ones network. The people that use free antivirus would likely be the ones that expect such a service free and the people that understand that you get what you pay for would support a paid service. Personally I prefer a BGP based solution. Since there isn't...
by jspool
Wed Feb 21, 2018 7:47 pm
Forum: Forwarding Protocols
Topic: RFC 6666
Replies: 3
Views: 620

Re: RFC 6666

Is that due to current RouterOS limitation or Mikrotik not embracing blackhole routing for IPv6? It's a little bit of both IMHO. IPv6 in MikroTik is generally very barebones compared to the features they have implemented for IPv4. Yes sir I do believe you are correct. With the volume of IPv6 addres...
by jspool
Wed Feb 21, 2018 10:38 am
Forum: Beginner Basics
Topic: Random drops during gaming
Replies: 7
Views: 800

Re: Random drops during gaming

This, - ethernet over powernet connection (500 Mb/s network)

Are you using power line adapters to connect to the router?

If so your issue is most probably in the connection between you and the router
He already stated ---> "Wireless and ethernet cable via the router have the same problem."
by jspool
Tue Feb 20, 2018 10:51 pm
Forum: Beginner Basics
Topic: Random drops during gaming
Replies: 7
Views: 800

Re: Random drops during gaming

Have you ran a continuous traceroute to see if maybe its a saturation issue at a peering point between providers? The fact that a VPN seems to resolve it makes me think that the VPNs path to the server is less congested vs your default path. I have seen this with some Comcast connections in the USA....
by jspool
Tue Feb 20, 2018 10:20 pm
Forum: Forwarding Protocols
Topic: RFC 6666
Replies: 3
Views: 620

Re: RFC 6666

Mikrotik support responded with: Thank you for request. We will see what we can do for future versions.

Hopefully this will be addressed in a future update.
by jspool
Sun Feb 18, 2018 10:50 pm
Forum: Forwarding Protocols
Topic: RFC 6666
Replies: 3
Views: 620

RFC 6666

https://tools.ietf.org/html/rfc6666 If I try and distribute a IPv6 blocklist via BGP to a Mikrotik router using the next-hop of the RFC 6666 discard address the Mikrotik drops it: Debug Log: Martian global next hop: reserved address 100::1 invalid NEXTHOP Mikrotik Wiki: Another small difference is t...
by jspool
Thu Feb 01, 2018 7:42 pm
Forum: RouterBOARD hardware
Topic: ARM based new goodies on the horizon
Replies: 76
Views: 14232

Re: ARM based new goodies on the horizon

What I would love to see is a hAP AC with IPsec Hardware encryption and with a dedicated WPS button. As i see, hAP ac² have table "IPsec test results". It's mean that IPsec hardware encryption already works in this router. Also it have Reset/WPS button and Wave2 wireless chip. So we have (with comp...
by jspool
Thu Feb 01, 2018 7:38 pm
Forum: Scripting
Topic: Mikrotik Reboot Script?
Replies: 1
Views: 928

Re: Mikrotik Reboot Script?

/system scheduler add name=Reboot-Notification on-event="delay 30\r\ \n/log print file=logfile;\r\ \ndelay 10\r\ \n/tool e-mail send to=\"EnterEmailHere\" subject=\"\$[/system identity get name] - Rebooted at \$[/system clock get time] \$[/system clock get date]\" body=\"See attached log.\" file=\"...
by jspool
Sat Jan 27, 2018 11:47 pm
Forum: Wireless Networking
Topic: Dual sim wifi router for buses
Replies: 10
Views: 1788

Re: Dual sim wifi router for buses

Pepwave Max BR1 already does all of this. While you may be able to cobble Mikrotik stuff together to make something work I think you would find the Max BR1 pretty awesome and rugged for that use case. The Sierra Wireless ES450 is also a great unit for single SIM use.
by jspool
Sat Jan 27, 2018 11:40 pm
Forum: RouterBOARD hardware
Topic: ARM based new goodies on the horizon
Replies: 76
Views: 14232

Re: ARM based new goodies on the horizon

What I would love to see is a hAP AC with IPsec Hardware encryption and with a dedicated WPS button. That would make a very capable SOHO device.
by jspool
Sat Jan 27, 2018 11:19 pm
Forum: General
Topic: How to allow two devices with same IP access internet [SOLVED]
Replies: 21
Views: 2083

Re: How to allow two devices with same IP access internet [SOLVED]

What IoT device is made with a fixed and unchangeable IP address?
by jspool
Tue Jan 23, 2018 12:27 am
Forum: General
Topic: Any plans for SD WAN?
Replies: 18
Views: 8096

Re: Any plans for SD WAN?

I'm using Mikrotik. The Cisco doc just explains it really well. In my situation I configured the HA or SDWAN mikrotik router and then connected their existing Mikrotik router to it. I just assumed the gateway position and was in between the ISP connections and their router. HA - SDWAN Router Ether1 ...
by jspool
Mon Jan 22, 2018 10:45 pm
Forum: General
Topic: Any plans for SD WAN?
Replies: 18
Views: 8096

Re: Any plans for SD WAN?

I agree with you. However I doubt you will see it anytime soon. I use OSPF with BFD on each tunnel and it switches very fast. But your right that its not balancing loads etc. That particular client uses a static IP from my POP that floats between the tunnels. They have an onsite PBX and it allows th...
by jspool
Mon Jan 22, 2018 8:43 pm
Forum: General
Topic: Any plans for SD WAN?
Replies: 18
Views: 8096

Re: Any plans for SD WAN?

Much of the typical SDWAN features can be implemented if you like to geek out to a high degree. Actually I think it would take considerable development from Mikrotik to have a simplified approach like Pepwave. At one medical facility I have 3 different WAN connections and three tunnels back to my PO...
by jspool
Mon Jan 15, 2018 3:40 am
Forum: Virtualization
Topic: CHR suggestions for new functionality
Replies: 157
Views: 32372

Re: CHR suggestions for new functionality

I doubt you will see such features. Would it be cool? Absolutely! I would imagine you will grow old and die before you see the requested features ;) I made a Mikrotik based SD-WAN solution for a client that works quite well. I spent a month in the lab testing various scenarios to get the desired fu...
by jspool
Sat Nov 25, 2017 10:06 pm
Forum: General
Topic: CPU 100% uploading files to NAS
Replies: 14
Views: 1148

Re: CPU 100% uploading files to NAS

NAS units have a tendency to rape router resources. My NAS has 4 Ethernet ports so I connected it to each network and have no issues with speeds as it is in each network and has no need to route. This is where network design comes into play. Look at everything and try to keep the high throughput dev...
by jspool
Sat Nov 25, 2017 10:01 pm
Forum: Beginner Basics
Topic: how to create 1 public IP on 2WAN setup
Replies: 2
Views: 329

Re: how to create 1 public IP on 2WAN setup

As Hominidae said dynamic DNS is useful for situations such as this. Providing the DNS TTL is low and will update quickly and not cause connectivity issues while waiting for the change to propagate. You can also use several other dynamic DNS providers if you utilize scripting. If there is a Mikrotik...
by jspool
Sat Nov 25, 2017 9:55 pm
Forum: General
Topic: Mikrotik Switches Vs Cisco Switches
Replies: 20
Views: 4722

Re: Mikrotik Switches Vs Cisco Switches

Sure I recognize that problem but I think in most cases rack height is more expensive than depth... I agree with pe1chl. It would be like me wanting artists to release their music on 8 track tapes because that is all my car has. There may be some niche market for such a device but I highly doubt it...
by jspool
Sat Nov 25, 2017 9:50 pm
Forum: General
Topic: problem with laptop access
Replies: 1
Views: 208

Re: problem with laptop access

If you want help then you need to post your current config and explain the topography. A default config will not cause issues you describe.
by jspool
Sat Nov 25, 2017 9:46 pm
Forum: Scripting
Topic: 123abc only need 123 :pick how to
Replies: 4
Views: 570

Re: 123abc only need 123 :pick how to

:local long1 123ABC :local long2 "1.2Mbps-20Mhz/2S" :log info "Long1 is $long1" :log info "Long2 is $long2" :local short1 [:pick $long1 0 3] :log info "Short1 value is $short1" :local short2 [:pick $long2 0 3] :log info "Short2 value is $short2" Log Print: nov/26 03:41:58 script,info Long1 is 123AB...
by jspool
Thu Nov 23, 2017 7:49 am
Forum: Scripting
Topic: Syntax highlighting and completions for Sublime Text
Replies: 38
Views: 24693

Re: Syntax highlighting and completions for Sublime Text

Hi, Just found that MikrotikScript have disappeared from the available syntax options in my instance of Sublime Text What is more interesting, is that after I add the MikrotikScript package, Sublime Text will forcefully delete it, and this occurs only within few seconds after launch... Purchasing a...
by jspool
Wed Nov 15, 2017 11:27 pm
Forum: General
Topic: How to add public static IP to WAN?
Replies: 4
Views: 1031

Re: How to add public static IP to WAN?

This is something that you need to take up with your ISP. They will have the gateway, DNS settings for you. Nobody here will be able to divine that information. Once you have the data and ensure that they are bridging you can add the static IP to the desired port and setup a default route to the gat...
by jspool
Wed Nov 08, 2017 7:08 pm
Forum: Virtualization
Topic: CHR suggestions for new functionality
Replies: 157
Views: 32372

Re: CHR suggestions for new functionality

I doubt you will see such features. Would it be cool? Absolutely! I would imagine you will grow old and die before you see the requested features ;) I made a Mikrotik based SD-WAN solution for a client that works quite well. I spent a month in the lab testing various scenarios to get the desired fun...
by jspool
Mon Oct 30, 2017 12:22 am
Forum: Wireless Networking
Topic: Wi-Fi speed issues on hAP AC Lite
Replies: 37
Views: 17641

Re: Wi-Fi speed issues on hAP AC Lite

The "Lite" series seems to be more focused on budget vs performance. I will say the hAP AC and the wAP AC works great. The lite versions I have tested have all sucked in the throughput area. Perhaps if we were in a Faraday cage with only our Lite and the wireless device it might perform well. That b...
by jspool
Mon Oct 30, 2017 12:13 am
Forum: Wireless Networking
Topic: Combining two radios into one antenna
Replies: 27
Views: 2254

Re: Combining two radios into one antenna

While its possible to run a combiner and utilize a single antenna I have only ever seen it employed when people are backed into a corner (No available space on tower to add additional antennas etc). 1. Its generally expensive. 2. You lose a considerable amount of power with a combiner. Generally thi...
by jspool
Sun Oct 29, 2017 11:44 pm
Forum: General
Topic: Feature Request: GeoBlocking Firewall
Replies: 16
Views: 4050

Re: Feature Request: GeoBlocking Firewall

@hturkan I am aware of such methods. My post was more about native features vs scripting.
by jspool
Sun Oct 22, 2017 3:47 am
Forum: Wireless Networking
Topic: 36 km Gigabit link
Replies: 17
Views: 1878

Re: 36 km Gigabit link

@mistry7: I'm in the US. From all my research, it seems like going licensed channel might the only non-noisy option to make this succeed. The cost is ~$7k each radio which is less than desirable so we'll need to come up with something creative like some repeating stations in between or a mesh or so...
by jspool
Wed Oct 11, 2017 7:31 pm
Forum: Scripting
Topic: Send notification mail on new VPN connection
Replies: 14
Views: 7713

Re: Send notification mail on new VPN connection

Hello So here is an option: In "ppp profile scripts on the profile your L2TP server is set to use" place the following into the "On Up": :local FromEmail "myfromaddress@mydomain.com" :local ToEmail "mytoaddress@mydomain.com" :foreach i in=[/ppp active find where uptime <1m] do={ :local Addr [/ppp ac...
by jspool
Wed Oct 11, 2017 11:58 am
Forum: Scripting
Topic: Send notification mail on new VPN connection
Replies: 14
Views: 7713

Re: Send notification mail on new VPN connection

Have you tried using "pptp" and "info" for topics? Assuming your using PPTP.
by jspool
Wed Oct 11, 2017 5:11 am
Forum: Scripting
Topic: Send notification mail on new VPN connection
Replies: 14
Views: 7713

Re: Send notification mail on new VPN connection

Try removing "account" from the log rule topics and see if that gives you the desired data. It may result in more notifications however it should contain the true IP when they connect.
by jspool
Sun Oct 08, 2017 9:03 am
Forum: General
Topic: Schedule - startup (v6.35.2)
Replies: 5
Views: 863

Re: Schedule - startup (v6.35.2)

In my post I outlined current behavior. This is exactly how its working for me for some time. As to their Wiki I have no idea if its correct or current I just know how it works as I tested it and determined the operation.
by jspool
Sat Oct 07, 2017 7:44 am
Forum: General
Topic: Mikrotik Forum has gotten quite slow
Replies: 15
Views: 1704

Re: Mikrotik Forum has gotten quite slow

I also noticed it slow for a few days. For me it was the worst when clicking reply and waiting for the page to load and then when trying to post. It was 10+ seconds for those pages. It does seem better at the time of this post. I noticed a SQL connection error one night but I assume it was maintenan...
by jspool
Sat Oct 07, 2017 6:16 am
Forum: General
Topic: Feature Request - DNS txt records support
Replies: 4
Views: 936

Re: Feature Request - DNS txt records support

No problem. It was an awesome day when they rolled out the new fetch. Now I can interact with Rest API's and send SMS and control devices. Was badly needed.
by jspool
Sat Oct 07, 2017 6:12 am
Forum: Announcements
Topic: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!
Replies: 109
Views: 29280

Re: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!

Metrolinq 2.5 models have 42dBi antennas and run 2.5 Gbps at up to a 1 mile distance.

I would be interested to see Mikrotik offer a model that has narrow beam high gain antennas. No doubt would be incredible...
by jspool
Sat Oct 07, 2017 6:04 am
Forum: General
Topic: Feature Request - System Voltage and Temperature Graphing in Resource
Replies: 18
Views: 3161

Re: Feature Request - System Voltage and Temperature Graphing in Resource

Its a good first step. Personally I don't see much use for passive devices in this day and age when there are so many chips available for very little cost. Many useful features could be implemented: Periodic Self test. Keeping track of power anomalies. Runtime alerts etc. I think its cool that they ...
by jspool
Sat Oct 07, 2017 5:48 am
Forum: RouterBOARD hardware
Topic: wAP LTE SIM Personal Hotspot Limits - Three UK [SOLVED]
Replies: 13
Views: 1802

Re: wAP LTE SIM Personal Hotspot Limits - Three UK [SOLVED]

I'm using it on a steel boat, the signal inside the boat on a phone is highly variable and data patchy, previously using the hotspot on a MotoG3 in the Window was giving about 5mbps and occasional dropouts, not with the wAP LTE mounted on a very short pole on the roof about 75cm higher reliably get...
by jspool
Fri Oct 06, 2017 7:44 am
Forum: RouterBOARD hardware
Topic: wAP LTE SIM Personal Hotspot Limits - Three UK [SOLVED]
Replies: 13
Views: 1802

Re: wAP LTE SIM Personal Hotspot Limits - Three UK [SOLVED]

@HarvSki How is the LTE signal strength with the built in antennas? I am curious how they perform. what kind of speeds do you see? Thanks.
by jspool
Fri Oct 06, 2017 7:33 am
Forum: General
Topic: Mikrotik will lose internet connection under heavy download usage [SOLVED]
Replies: 10
Views: 1493

Re: Mikrotik will lose internet connection under heavy download usage [SOLVED]

Could it be saturation? Have you tried capping the bandwidth just below your max speed to see if it will keep it alive?
by jspool
Fri Oct 06, 2017 7:30 am
Forum: Wireless Networking
Topic: High density scenario
Replies: 3
Views: 516

Re: High density scenario

If its really nasty Cambium might be the only way to maintain a decent link. Otherwise shield the best you can and try to find a clean channel and hope nobody changes their channels.
by jspool
Fri Oct 06, 2017 7:26 am
Forum: General
Topic: Feature Request - System Voltage and Temperature Graphing in Resource
Replies: 18
Views: 3161

Re: Feature Request - System Voltage and Temperature Graphing in Resource

They made the mUPS and its not even networked. Its purpose is power delivery and It should have SNMP and voltage monitoring and scripts as well. Their quote "In RouterOS it is possible to detect when running on battery power by monitoring the input voltage with scripting, since the voltage will chan...
by jspool
Fri Oct 06, 2017 6:54 am
Forum: General
Topic: Schedule - startup (v6.35.2)
Replies: 5
Views: 863

Re: Schedule - startup (v6.35.2)

The interval is ignored when startup is set.
^Incorrect^. In the original post the script would first run 5 minutes after boot up and then every 5 minutes. If no duration is specified (00:00:00) it will run once right after boot up.
by jspool
Fri Oct 06, 2017 1:49 am
Forum: Beginner Basics
Topic: Mangle function for phones ?
Replies: 4
Views: 504

Re: Mangle function for phones ?

But without a PBX on the LAN, what is the interest to mark the VOIP traffic ? What happens if a user is consuming all of the available bandwidth? VoIP calls will sound horrible at the least and most likely drop the call. Its important to properly QOS the network to ensure that everything works as d...
by jspool
Tue Oct 03, 2017 7:37 pm
Forum: General
Topic: Feature Fix
Replies: 3
Views: 922

Re: Feature Fix

We are using "model" value to apply default configuration. It is the same as product code except that prefix is full name not abbreviation. RB1100Dx4 vs RouterBOARD 1100Dx4 I do not see anything broken there. My configs are model specific. I typically have a url with the model in the url. So now th...
by jspool
Sun Oct 01, 2017 3:41 pm
Forum: General
Topic: Suggestion: VPN profile selected from radius response
Replies: 4
Views: 1514

Re: Suggestion: VPN profile selected from radius response

Have you tried Framed-Pool and then setup firewalls based on assigned IP?
by jspool
Sun Oct 01, 2017 3:35 pm
Forum: General
Topic: Feature Request - DNS txt records support
Replies: 4
Views: 936

Re: Feature Request - DNS txt records support

Bear in mind that you can also point the router to your own DNS servers so you would be in control and not have to worry about propagation issues. And Fetch supports https already unless there is a specific thing you are referring to that it does not specifically do.
by jspool
Sat Sep 30, 2017 11:47 pm
Forum: General
Topic: Why I am not using WinBox!
Replies: 24
Views: 2569

Re: Why I am not using WinBox!

I'm not using winbox at night. Because white theme damaging my eyes. Please add dark theme to winbox

Sent from my C6833 using Tapatalk

LOL Next will be: I am cross eyed please enable cross eyed mode so I can see it clearly.
by jspool
Sat Sep 30, 2017 8:08 pm
Forum: General
Topic: Why I am not using WinBox!
Replies: 24
Views: 2569

Re: Why I am not using WinBox!

The creators have every right to make it how they want it. No that being said users can voice their opinion and perhaps change things. In this case nothing was incorrectly named as it was designed for use with Windows. I highly doubt they will devote resources to a new Tik Manager with multi OS supp...
by jspool
Sat Sep 30, 2017 7:54 pm
Forum: General
Topic: Feature Fix
Replies: 3
Views: 922

Feature Fix

The product code should be available in RouterOS since they decided to stray from their traditional system routerboard get-model and include unneeded data that breaks scripts that rely on it.
system routerboard get product-code should be added to RouterOS and contain only the product code.
by jspool
Sat Sep 30, 2017 7:47 pm
Forum: RouterBOARD hardware
Topic: Continuity lacking
Replies: 2
Views: 538

Re: Don't drink and come up with model numbers

So what? The letters and numbers mean something... Unfortunately not always the same. The actual model number means something. I never argued that point. And I actually am OK with the model numbers layout. Now as to the "So What?" If you have to change scripts constantly because what should be cons...
by jspool
Sat Sep 30, 2017 9:37 am
Forum: RouterBOARD hardware
Topic: Continuity lacking
Replies: 2
Views: 538

Continuity lacking

I am not a fan of the system routerboard model field having RouterBOARD and a space before the actual model. I use my own upgrade servers and I use the model field as a variable in the url field. fetch: http://myserver/mikrotik/$modelNum/version.txt I doubt we will be confused and imagine that its a...
by jspool
Thu Sep 28, 2017 7:15 am
Forum: Virtualization
Topic: CHR suggestions for new functionality
Replies: 157
Views: 32372

Re: CHR suggestions for new functionality

I would agree that a x86_64 ISO would be useful. I utilize several CHR and I do like them. The license check in I do find annoying. Kinda has a Microsoft feel. The Elephant in the room is why there is not a CCR that has the balls to handle the more demanding tasks quickly and reliably. I don't think...
by jspool
Thu Sep 28, 2017 12:22 am
Forum: General
Topic: Why I am not using WinBox!
Replies: 24
Views: 2569

Re: Why I am not using WinBox!

I have always thought that my vision is my responsibility. I get glasses accordingly. some need bi or tri focals. I don't send mail back to sender because its not the font I desire.
I would get a 50" monitor or jewelers glasses vs making it other peoples responsibility to conform to my needs.
by jspool
Wed Sep 27, 2017 11:39 am
Forum: Wireless Networking
Topic: Connecting 2 houses with internet connection wirelessy [SOLVED]
Replies: 4
Views: 766

Re: Connecting 2 houses with internet connection wirelessy [SOLVED]

I would totally do the RBwAPG60-ad since its full duplex and you wont be making noise for your 5Ghz indoor WiFi.
by jspool
Wed Sep 27, 2017 11:34 am
Forum: Scripting
Topic: Scheduler Issue
Replies: 1
Views: 298

Re: Scheduler Issue

I just tested it in the ip dhcp-client script area and it works perfectly. So is there any hope for scheduler to work in a non retarded fashion?
by jspool
Wed Sep 27, 2017 10:56 am
Forum: Wireless Networking
Topic: can i set up "SXT SA5 AC" at indoor???
Replies: 3
Views: 466

Re: can i set up "SXT SA5 AC" at indoor???

As long as you do not need any 2.4Ghz you should do fine. With traditional access points you try to place near the users for the best performance. This would be more suited for a corner mount that's facing the customers. If you need dual band the hAP AC is pretty awesome.
by jspool
Wed Sep 27, 2017 10:37 am
Forum: Scripting
Topic: Scheduler Issue
Replies: 1
Views: 298

Scheduler Issue

So is there a timeout in scheduler? I can run a script manually with no issue. But if I run it with scheduler it fails with script error: no such item (4). The script uses fetch to download a 10M file. I have capped the bandwidth at 64k to simulate file downloads on really slow Internet connections....
by jspool
Wed Sep 27, 2017 5:27 am
Forum: Scripting
Topic: Upgrade bios firmware in script
Replies: 6
Views: 5802

Re: Upgrade bios firmware in script

You simply need to use this:
:execute script="/system routerboard upgrade"
:execute script="/system reboot"

https://wiki.mikrotik.com/wiki/Manual:S ... l_commands
@strods So to be clear the second execute command will not run until the first has completed?
by jspool
Wed Sep 27, 2017 3:21 am
Forum: General
Topic: Feature Request
Replies: 0
Views: 373

Feature Request

"break" or "exit" in RouterOS scripting. Would be real nice to have this vs having to employ "while"
by jspool
Wed Sep 27, 2017 2:27 am
Forum: Virtualization
Topic: CHR suggestions for new functionality
Replies: 157
Views: 32372

Re: CHR suggestions for new functionality

CHR should run containers, docker or whatever. Thats great +1 Please clarify how you would use it and why :) Just leave it here: https://www.youtube.com/watch?v=PivpCKEiQOQ So true! snowflake feature requests should be discarded ;) feature requests should be related to core functions and perhaps li...
by jspool
Tue Sep 26, 2017 10:39 pm
Forum: Scripting
Topic: Send files to telegram
Replies: 2
Views: 2135

Re: Send files to telegram

The default content-type is: content-type = application / x-www-form-urlencoded and can not be changed. Unfortunately, we can send files only this way /tool fetch url="https://api.telegram.org/botXXXXXXXX:XXXXXXXXXXXXXXXXXXXXXXXXX/sendDocument\?chat_id=XXXXXXXXX" http-method=post http-data="documen...
by jspool
Tue Sep 26, 2017 10:26 pm
Forum: General
Topic: Feature Request - DNS txt records support
Replies: 4
Views: 936

Feature Request - DNS txt records support

It would be nice if Mikrotik supported resolving DNS txt records. Currently: failure: dns name exists, but no appropriate record In scripting it would be very useful to check such records and trigger actions based on the records value. I noticed it was requested two years ago as well. I thinks its t...
by jspool
Mon Sep 25, 2017 4:23 am
Forum: Scripting
Topic: Remote Reboot & Power Status
Replies: 8
Views: 1602

Re: Remote Reboot & Power Status

If it performs it will be quite the game changer in that overpriced market.
by jspool
Sun Sep 24, 2017 11:25 pm
Forum: Scripting
Topic: Remote Reboot & Power Status
Replies: 8
Views: 1602

Re: Remote Reboot & Power Status

I also am very interested in the LTE offering. I assume as long as they keep up on development and bugfixes the support for the modem should be acceptable. Its nice that it supports 3G fallback as well. If the modem sucks I suppose we could get one without the modem and add our own providing they su...
by jspool
Sun Sep 24, 2017 10:31 pm
Forum: Scripting
Topic: Remote Reboot & Power Status
Replies: 8
Views: 1602

Re: Remote Reboot & Power Status

For me its a cheap way to mass deploy as the cost is only $2.99 per month. I have Sierra Wireless AirLink ES450 units and they are awesome. But at $500 a pop and then adding to cellular plan for each location it gets costly. Also it has a LiPo battery that allows it to actually be "on" during power ...
by jspool
Sun Sep 24, 2017 9:53 pm
Forum: Scripting
Topic: Remote Reboot & Power Status
Replies: 8
Views: 1602

Re: Remote Reboot & Power Status

Must have not looked that hard. I have been using these for coming up on a decade now. https://dlidirect.com/products/web-power-switch-7 Interesting project thou. Perhaps you didn't read it closely. Mine is not Ethernet or WiFi. Integrated global 3G modem. How many Cellular PDU's have you seen?
by jspool
Sun Sep 24, 2017 4:05 am
Forum: Wireless Networking
Topic: wAP or Omnitik or Netmetal for 5Ghz
Replies: 6
Views: 839

Re: wAP or Omnitik or Netmetal for 5Ghz

If you could get it near center of desired coverage area I would probably go for OmniTIK 5 AC. It has 1300mW & 7.5 dBi of gain. If you compare that with the Ubiquiti UniFi AC Pro 6 dBi it should do quite well.
by jspool
Sun Sep 24, 2017 1:11 am
Forum: RouterBOARD hardware
Topic: More info about mUPS
Replies: 53
Views: 8990

Re: More info about mUPS

For a feature request for v 1.1 Incorporate this into a wAP LTE and add a couple form C relays that are controlled by routeros (Pretend they are POE ports ;) ) Get alerts over LTE when site is having power issues etc. Primary power script on up, on down Voltage threshold min max Voltage script above...
by jspool
Sun Sep 24, 2017 12:59 am
Forum: Wireless Networking
Topic: wAP or Omnitik or Netmetal for 5Ghz
Replies: 6
Views: 839

Re: wAP or Omnitik or Netmetal for 5Ghz

And of course do a proper site survey to ensure you are on the best possible channels.
by jspool
Sun Sep 24, 2017 12:54 am
Forum: Scripting
Topic: Remote Reboot & Power Status
Replies: 8
Views: 1602

Remote Reboot & Power Status

At some point I always have to make a run to a site to deal with hardware thats locked up. That could be a PTP link or a Comcast, Charter modem or router. So I figured I needed to see what could be done to minimize the trips for simple reboots. First off I wanted to do at least three things. 1. To d...
by jspool
Sun Sep 24, 2017 12:10 am
Forum: Scripting
Topic: Can't get it to run as a script
Replies: 2
Views: 395

Re: Can't get it to run as a script

Hello,

I assume you need to add:
:global gasgenautostate
The line:
:if ($gasgenautostate = "on") && ($currentvoltage > $genoffvolts) do={
is incorrect.

Try:
:if (($gasgenautostate = "on" && $currentvoltage > $genoffvolts)) do={
by jspool
Sat Sep 23, 2017 8:36 pm
Forum: Virtualization
Topic: Transfer license [SOLVED]
Replies: 3
Views: 3627

Re: Transfer license [SOLVED]

Setup new CHR install and get it connected to your Mikrotik account. Log into Mikrotik account and click on CHR licenses. Find desired license and click transfer. Transfer to system ID has a drop down box that lists all applicable ID's on your account. You should see your new ID from the new install...
by jspool
Sat Sep 23, 2017 8:23 pm
Forum: Wireless Networking
Topic: wAP or Omnitik or Netmetal for 5Ghz
Replies: 6
Views: 839

Re: wAP or Omnitik or Netmetal for 5Ghz

In an ideal situation I try to put the AP's near the clients and run them at the lowest acceptable power level to get the job done. Sometimes this means more AP's however typically its a much better client experience as the client devices never seem to have the tx power or rx sensitivity to make hig...
by jspool
Sat Sep 23, 2017 7:54 pm
Forum: Wireless Networking
Topic: Wi-Fi on-off switch
Replies: 10
Views: 3049

Re: Wi-Fi on-off switch

Imagine if RouterOS supported Bluetooth! You could scan for specific Bluetooth devices and run scripts based on the results.
by jspool
Sat Sep 23, 2017 1:38 am
Forum: General
Topic: non-magnetic metal used for mount bracket screws of CCR1016
Replies: 3
Views: 595

Re: non-magnetic metal used for mount bracket screws of CCR1016

I will agree that it is a pain sometimes putting in small non-ferrous screws. I ended up using a Wera Kraftform screwdriver with the Lasertip as they seem to hold non magnetic screws well.
by jspool
Fri Sep 22, 2017 10:04 pm
Forum: Announcements
Topic: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!
Replies: 109
Views: 29280

Re: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!

IgniteNet MetroLinq 60-35-1 is a 60Ghz PTP with a 42dBi antenna with a max range of 1.5 km. Would be nice if Mikrotik made a similar product that was more focused so we could get a bit better range. They also have an integrated 5Ghz backup in case of bad weather.
by jspool
Fri Sep 22, 2017 4:12 am
Forum: General
Topic: CCR1072 and 1036 using FICON protocal on SFP
Replies: 3
Views: 606

Re: CCR1072 and 1036 using FICON protocal on SFP

I would assume that you are using one of the supported modules?
https://wiki.mikrotik.com/wiki/Manual:Peripherals

If so you should email support to see if they have suggestions. If its not on the list perhaps they do not yet support it. Either way you should probably email support.
by jspool
Fri Sep 22, 2017 4:08 am
Forum: Beginner Basics
Topic: Cant Ping Device
Replies: 2
Views: 325

Re: Cant Ping Device

To get help you would need to post your config. IP addresses / firewall rules / IP routes etc.
by jspool
Fri Sep 22, 2017 4:05 am
Forum: Beginner Basics
Topic: Setting up RB750r2 hEX lite with radius server
Replies: 8
Views: 1257

Re: Setting up RB750r2 hEX lite with radius server

Everyone starts somewhere. Being eager to learn and understanding that networking its not something you will master in a month will help you in the long run. I have been involved with wired and wireless networking for about 12 years and I am constantly learning new things and better methods. I find ...
by jspool
Thu Sep 21, 2017 7:15 am
Forum: General
Topic: How to prevent DHCP server from issuing an IP?
Replies: 3
Views: 949

Re: How to prevent DHCP server from issuing an IP?

Cant you do an IP scan in your address range and compare to your DHCP leases? Then you could either modify the pools around the used IP's or you could set the static IP's with static leases. Even if they never use DHCP the router will be reserve those IP's and not assign them. I know many WISP's uti...
by jspool
Thu Sep 21, 2017 7:09 am
Forum: Beginner Basics
Topic: Setting up RB750r2 hEX lite with radius server
Replies: 8
Views: 1257

Re: Setting up RB750r2 hEX lite with radius server

You need to familiarize yourself with the Mikrotik router and AP at home or work prior to deployment to ensure you have everything dialed in the way you want it. Only a 5Ghz AP for your residents? Are all of their devices 5Ghz capable? Generally if very many walls are involved you need to use 2.4Ghz...
by jspool
Thu Sep 21, 2017 6:41 am
Forum: Scripting
Topic: Syntax highlighting and completions for Sublime Text
Replies: 38
Views: 24693

Re: Syntax highlighting and completions for Sublime Text

Its my go to now for scripting. Thanks for the Mikrotik support. It's so much easier with highlighting.
by jspool
Thu Sep 21, 2017 6:16 am
Forum: Announcements
Topic: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!
Replies: 109
Views: 29280

Re: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!

Would the Wireless Wire product be capable of operating indoors, in a residential construction home? i.e., drywall, wood, no metal structures. What sort of speed could I expect passing through 1 or 2 gypsum drywalls? To quote someone else: At 60 GHz, the signal would be severely challenged to penet...
by jspool
Sat Sep 16, 2017 8:38 pm
Forum: Wireless Networking
Topic: Use wireless instead of cable to printer
Replies: 2
Views: 506

Re: Use wireless instead of cable to printer

I agree with BartoszP. You essentially need a wireless bridge. Wireless bridges convert WiFi connection to Ethernet. In some instances where the distance to existing access points was a bit far I found the mAP did not have enough antenna gain to work consistently and required a wAP to work well. But...
by jspool
Sat Sep 16, 2017 8:21 pm
Forum: RouterBOARD hardware
Topic: Hardware suggestion please
Replies: 5
Views: 635

Re: Hardware suggestion please

RB962UiGS-5HacT2HnT
by jspool
Sat Sep 16, 2017 10:59 am
Forum: Announcements
Topic: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!
Replies: 109
Views: 29280

Re: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!

@normis Are there any plans for a high gain narrow beam 60Ghz PTP?
full duplex with high gain narrow beam antenna would be awesome. And speaking of full duplex does Mikrotik have any plans to enter the 24Ghz PTP arena?

mUPS was a great idea as well.
by jspool
Tue Sep 12, 2017 9:42 pm
Forum: The Dude
Topic: Alerts based on throughput threshold
Replies: 4
Views: 1033

Re: Alerts based on throughput threshold

With scripting on Mikrotik's you can generally accomplish anything if you are willing to dive in and experiment a bit. Just off the top of my head - Probably could do better with more time You could place the following in your monitor script area: Add your alerting code where indicated or call a scr...
by jspool
Tue Sep 12, 2017 8:33 pm
Forum: Beginner Basics
Topic: Google drive does not reconnect
Replies: 5
Views: 686

Re: Google drive does not reconnect

Have you tried manually clearing the connection from ip firewall connections in winbox?
by jspool
Tue Sep 12, 2017 12:18 am
Forum: RouterBOARD hardware
Topic: Hardware suggestion please
Replies: 5
Views: 635

Re: Hardware suggestion please

hAP AC is very good as well.
by jspool
Mon Sep 11, 2017 10:08 pm
Forum: Beginner Basics
Topic: Mikrotik RB750Gr3 & CaptionCall Telephone [SOLVED]
Replies: 5
Views: 705

Re: Mikrotik RB750Gr3 & CaptionCall Telephone [SOLVED]

Glad to help! Its kind of stupid that they depend on ICMP for their stuff to work properly.
by jspool
Mon Sep 11, 2017 8:10 pm
Forum: Beginner Basics
Topic: Mikrotik RB750Gr3 & CaptionCall Telephone [SOLVED]
Replies: 5
Views: 705

Re: Mikrotik RB750Gr3 & CaptionCall Telephone [SOLVED]

Have you tried disabling the service ports and then trying the NAT?
Have you tried disabling the drop invalid forward in firewall filter?

Also clear connections in ip firewall connections after making changes.
by jspool
Mon Sep 11, 2017 8:04 pm
Forum: General
Topic: Feature Request: GeoBlocking Firewall
Replies: 16
Views: 4050

Re: Feature Request: GeoBlocking Firewall

Sophos UTM has a very nice geo blocking feature and it is quite handy. It would probably involve Mikrotik subscribing to a service that keeps the IP ranges for each country up to date as much as possible and then a periodic update of those ranges to the routers. ... and then "us", who use MikroTik ...
by jspool
Mon Sep 11, 2017 8:46 am
Forum: Wireless Networking
Topic: looking for the best wifi router (ISP)
Replies: 9
Views: 2231

Re: looking for the best wifi router (ISP)

wAP AC and RB952Ui-5ac2nD, but the wifi speed is very horrible. Never more than 50-60 mbps on a clean 5 ac channel with -55db The wan capable of 125mbps. See here . hAP AC & wAP AC are the best! I can do over 150Mbps on my cell phone, Yes, and the OP is speaking about ISP services. 1) Outdoors, 2) ...
by jspool
Mon Sep 11, 2017 7:59 am
Forum: General
Topic: Force DNS Server without Loosing Source IP?
Replies: 4
Views: 1193

Re: Force DNS Server without Loosing Source IP?

Hey, So I am thinking about running something like PiHole on my network or using OpenDNS. Ideally though if I use PiHole I would like all of the DNS from the network to be directed through the PiHole, but if the PiHole is down switch over to something like Google. Theoretically I can do this easily...
by jspool
Mon Sep 11, 2017 7:40 am
Forum: Wireless Networking
Topic: looking for the best wifi router (ISP)
Replies: 9
Views: 2231

Re: looking for the best wifi router (ISP)

wAP AC and RB952Ui-5ac2nD, but the wifi speed is very horrible. Never more than 50-60 mbps on a clean 5 ac channel with -55db The wan capable of 125mbps. See here . hAP AC & wAP AC are the best! I can do over 150Mbps on my cell phone. Many times poor results are poor channel selection or channel wi...
by jspool
Mon Sep 11, 2017 7:26 am
Forum: Beginner Basics
Topic: VPN's IPs and DHCP
Replies: 6
Views: 4425

Re: VPN's IPs and DHCP

The remote side connects to the Mikrotik VPN server and during the connection process the server assigns it an available IP from the specified pool. To customize the assignment you can set the IP in ppp "secrets" for that specific user / device. If you do not with to use peer-dns: Set the DNS for th...
by jspool
Mon Sep 11, 2017 7:10 am
Forum: General
Topic: Need help with script syntax
Replies: 1
Views: 417

Re: Need help with script syntax

Tested in a script on 6.40.3 :if ([/ping 8.5.8.8 count=4] = 0) do={/interface disable ether3-local ;/interface enable ether3-local} It worked fine. Start commenting out the rest of your script to isolate the area that is causing issues. If this is all you have in the script make sure your interface ...
by jspool
Mon Sep 11, 2017 7:02 am
Forum: RouterBOARD hardware
Topic: Hardware suggestion please
Replies: 5
Views: 635

Re: Hardware suggestion please

I would say based on your requirements a RB750Gr3 should do fine. However as budgets allow you can always move up to whatever hardware you desire. With most Mikrotik devices the software capability is the same. The limiting factor is generally CPU power and if it has a USB port capable of supporting...
by jspool
Mon Sep 11, 2017 6:48 am
Forum: Beginner Basics
Topic: Mikrotik RB750Gr3 & CaptionCall Telephone [SOLVED]
Replies: 5
Views: 705

Re: Mikrotik RB750Gr3 & CaptionCall Telephone [SOLVED]

I am not familiar with that particular service however it could be that the SIP helper is messing things up. Have you tried: Modifying SIP Helper Add the ports they use for SIP signalling to the service ports so that the router is aware of them. /ip firewall service-port set sip ports=5060,5061,5065...
by jspool
Mon Sep 11, 2017 6:14 am
Forum: General
Topic: Winbox BUG !!! Boot OS : SwOS
Replies: 2
Views: 698

Re: Winbox BUG !!! Boot OS : SwOS

I wonder if the RB750Gr3 actually does support SwOS. It doesn't appear to have that option in the terminal but from a hardware perspective it should be able to handle it. https://i.mt.lv/routerboard/files/RB750Gr3-esw2-161125152443.png https://i.mt.lv/routerboard/files/RB750Gr3-dsw-161125140316.png
by jspool
Mon Sep 11, 2017 6:03 am
Forum: Beginner Basics
Topic: VPN's IPs and DHCP
Replies: 6
Views: 4425

Re: VPN's IPs and DHCP

Point-to-Point Tunneling Protocol. The server gives out /32 to clients as its a ptp. You are imagining that they are like EoIP and once they are tunneled they can get DHCP from the other side. ip pool add name=vpn-pool ranges =10.0.0.2-10.0.0.254 Server: Either in secret or profile local address 10...
by jspool
Mon Sep 11, 2017 5:51 am
Forum: Beginner Basics
Topic: PPTP tunnel unusable slow [SOLVED]
Replies: 3
Views: 2894

Re: PPTP tunnel unusable slow [SOLVED]

The nature of fasttrack makes it an enemy of mangle rules. Test it by disabling fasttrack. Make sure the normal accept established&related forward is still enabled. Clear connections and retest. If it works as desired then you can either leave it disabled or you could try marking the pptp traffic an...
by jspool
Mon Sep 11, 2017 5:40 am
Forum: General
Topic: Content and malware filter for Mikrotik
Replies: 1
Views: 598

Re: Content and malware filter for Mikrotik

You question is unclear and vague. Mikrotik is not a UTM or content filtering device. (L7 filtering can be utilized but generally not practical at all) Typically routers route and provide basic firewall functions. You can filter traffic by using filtered DNS like dnsfilter.com, OpenDNS etc. You can ...
by jspool
Mon Sep 11, 2017 5:35 am
Forum: General
Topic: script won't run on scheduler?
Replies: 11
Views: 4088

Re: script won't run on scheduler?

Have you tried putting this into the scheduler field instead of just the script name?

/system script run myscript
by jspool
Mon Sep 11, 2017 5:31 am
Forum: The Dude
Topic: Alerts based on throughput threshold
Replies: 4
Views: 1033

Re: Alerts based on throughput threshold

Hi, Is it possible to generate alerts based on throughput thresholds? e.g.: my upstream providers give us 1 Gbps each one. I want to receive alerts when traffic is too high or low. :D /tool traffic-monitor https://wiki.mikrotik.com/wiki/Manual:Tools/Traffic_Monitor http://bfy.tw/Dr12 Just setup a s...
by jspool
Mon Sep 11, 2017 5:24 am
Forum: General
Topic: VPN Address List
Replies: 5
Views: 1672

Re: VPN Address List

Please, show your work. We cannot divine the answer without seeing your rules. "We cannot divine the answer" :lol: Priceless. It's always the same no info but expecting all of the answers. Also I don't think there is any point to having passthrough enabled after marking the route. And always make s...
by jspool
Mon Sep 11, 2017 5:22 am
Forum: Beginner Basics
Topic: Backup Link
Replies: 3
Views: 854

Re: Backup Link

Look at some of the WAN failover posts and tutorials. You should be able to use the search box on the upper right of this site to find many examples of this configuration. Obviously you would need to masquerade the traffic leaving eth 9. Bear in mind you may wish to clear connections from ip firewal...
by jspool
Mon Sep 11, 2017 2:38 am
Forum: General
Topic: Feature Request: GeoBlocking Firewall
Replies: 16
Views: 4050

Re: Feature Request: GeoBlocking Firewall

Another use case for geoip would be country whitelisting during an attack. Let's say you have clients that only have traffic from a specific country and they get DDoS attacked (depending on where someone lives most attacks are out of country IPs), you can easily allow only this country's traffic an...
by jspool
Fri Sep 08, 2017 9:21 pm
Forum: General
Topic: VPN through Router
Replies: 1
Views: 557

Re: VPN through Router

Technically possible.

The wireless networks would need to have routing mark set by mangle rule and you would need to create a default route pointing to vpn-gateway with the same routing mark set in the mangle rule for the local network.
by jspool
Fri Sep 08, 2017 9:18 pm
Forum: Beginner Basics
Topic: Google drive does not reconnect
Replies: 5
Views: 686

Re: Google drive does not reconnect

Perhaps experiment and see if clearing connections resolves the issue.

/ip firewall connection tracking set enabled=no
/ip firewall connection tracking set enabled=yes (or auto)
by jspool
Fri Sep 08, 2017 9:13 pm
Forum: RouterBOARD hardware
Topic: CCR1036- Not Booting
Replies: 1
Views: 421

Re: CCR1036- Not Booting

Use the search feature on the top right and you will find several discussions relating to this.

viewtopic.php?t=116454
by jspool
Thu Sep 07, 2017 7:53 pm
Forum: General
Topic: Feature Requests
Replies: 2
Views: 574

Re: Feature Requests

1. Already possible without scripts. Address lists now support DNS names. 2. VRRP protocol do not handle this. It need to be researched for another protocol or write our own from scratch. 3. Already can be done with logging action send to mail with specific critical/error account topics 4. You can ...
by jspool
Wed Sep 06, 2017 11:31 pm
Forum: Virtualization
Topic: CHR suggestions for new functionality
Replies: 157
Views: 32372

Re: CHR suggestions for new functionality

Small business customers many times want everything rolled into one. Carriers want performance & stability. Mikrotik needs to sell their products so they have to determine who they are shaping their products around. If they had 3Ghz Tilera CCR's many of the BGP complaints would be lessened since the...
by jspool
Wed Sep 06, 2017 11:20 pm
Forum: General
Topic: Feature Requests
Replies: 2
Views: 574

Feature Requests

1. One thing I really do like with Sophos UTM is the ability to mark routing based on domain name. So all requests to mikrotik.com out via gateway 1 and all requests to example.com out via gateway 2. That would be useful to me anyway vs IP based or having to try and add every conceivable hostname to...
by jspool
Wed Sep 06, 2017 11:10 pm
Forum: Virtualization
Topic: CHR suggestions for new functionality
Replies: 157
Views: 32372

Re: CHR suggestions for new functionality

Guys, I think CHR should be kept clean, as it is now. It's damn small, and you can backup and restore your vm image in disaster recovery scenario quickly. Thats virtual router, not full blown linux machine. Thats why routeros (beside its bugs, sometimes) is rock solid. Adding too much stuff will en...
by jspool
Wed Sep 06, 2017 9:44 pm
Forum: General
Topic: Feature Request BLE Support
Replies: 0
Views: 450

Feature Request BLE Support

I think that some would utilize BLE beacons to advertise hotspots or other things at their location. Or be able to execute scripts when signal from mac is detected or is over or below signal threshold. Meraki has a dedicated BLE radio in some of their access points now. Its high on the geek level bu...
by jspool
Wed Sep 06, 2017 7:53 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154722

Re: RouterOS v7.0 beta1 - when?

Yes, it was on MUM. On US MUM in 2014 :) https://mum.mikrotik.com//presentations/US14/ccrros.pdf In the pdf you referenced from 2014, it talks about, v6.8 I haven't seen anything beyond 6.41 in RC or beta yet in 2017. Where are these being released at? 6.8 was released in Jan of 2014: What's new in...
by jspool
Sun Sep 03, 2017 1:18 am
Forum: Beginner Basics
Topic: customer frequency tracking
Replies: 5
Views: 648

Re: customer frequency tracking

You can just read this post: https://forum.mikrotik.com/viewtopic.php?f=13&t=125057 Which is for free, too, and much smarter than your contribution. However, no continous (streaming) solutions. As you get, what you pay for. Forum etiquette would be to send the op a PM vs trying to sell your service...
by jspool
Sat Sep 02, 2017 9:40 pm
Forum: RouterBOARD hardware
Topic: CCR Port Failures
Replies: 2
Views: 557

Re: CCR Port Failures

Routers were acquired from an asset sale. I assume some were not properly grounded and resulted in the port failures. This aside I would assume that the remaining ports should be fine moving forward since I believe in proper grounding.
by jspool
Sat Sep 02, 2017 9:36 pm
Forum: Beginner Basics
Topic: customer frequency tracking
Replies: 5
Views: 648

Re: customer frequency tracking

You can always script a scan to occur on a schedule or after a reboot and then have it ftp, email, fetch you the results and any other data you need like serial number, MAC addresses etc.
All without having to pay a Freelancer :lol:
by jspool
Sat Sep 02, 2017 9:33 pm
Forum: Virtualization
Topic: CHR suggestions for new functionality
Replies: 157
Views: 32372

Re: CHR suggestions for new functionality

How hard would it be to make a CHR that did not do routing but acted as a synchronization server for Mikrotik routers. Everyone knows that they can use VRRP however lets say you add some IP's, firewall rules, users etc to the master and then you have to remember to also do it on the slave. It would ...
by jspool
Sat Sep 02, 2017 9:26 pm
Forum: General
Topic: Webfig needs help
Replies: 3
Views: 437

Re: Webfig needs help

If enough people request further customization of Webfig Mikrotik will consider it. I wonder how hard it would be to allow html and call variables much like in the hotspot web server? The framework of Webfig is the same as Winbox which is cool for service providers. But for average customers its ask...
by jspool
Sat Sep 02, 2017 9:15 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154722

Re: RouterOS v7.0 beta1 - when?

If they rush a alpha level product out the door the response would be more negative as many expect it to work near perfectly upon release. I hope that they use it internally for the time needed to work out the basic bugs prior to a public release. Of course the longer they wait to release the more i...
by jspool
Sat Sep 02, 2017 9:05 pm
Forum: General
Topic: Cloud
Replies: 5
Views: 938

Re: Cloud

So I couldn't use the cloud setting to VPN in? Sent from my XT1650 using Tapatalk https://wiki.mikrotik.com/wiki/Manual:IP/Cloud As stated in the wiki the cloud is a DDNS service. It determines your public IP address and sets a dynamic DNS record accordingly. I know exactly what you are thinking. B...
by jspool
Sat Sep 02, 2017 6:25 am
Forum: General
Topic: Cloud
Replies: 5
Views: 938

Re: Cloud

Do you mean that you don't have a static public IP or are you saying that your provider is giving you a private IP and masquerading multiple customers over their public IP's?
by jspool
Sat Sep 02, 2017 6:17 am
Forum: General
Topic: Mikrotik Fault Tolerance Solution
Replies: 4
Views: 1196

Re: Mikrotik Fault Tolerance Solution

The nice thing about Mikrotik is that you can generally script workarounds to achieve the desired goals. It's a shame that your provider cannot adequately support a VRRP based solution. I personally use VRRP and have found it to do remarkably well. Its always nice to reboot an edge router and not ev...
by jspool
Thu Aug 31, 2017 4:53 am
Forum: General
Topic: Tor Browser
Replies: 1
Views: 884

Re: Tor Browser

I believe SquidBlacklist provides a current listing of the published Tor nodes for free. http://www.squidblacklist.org/downloads/sbl-tornodes.rsc Schedule the router to run the above script as desired. You could create a firewall rule to drop any traffic coming from or going to "sbl tornodes" addres...
by jspool
Wed Aug 30, 2017 11:27 pm
Forum: RouterBOARD hardware
Topic: CCR Port Failures
Replies: 2
Views: 557

CCR Port Failures

I have a few CCR1036-12G-4S and a CCR1009-8G-1S-1S+ that have 2-3 Ethernet ports that are not working. I am interested in hearing from people who have had the same issues. On some of my applications I don't need very many ports so technically the dead ports are not impacting me. Do you normally see ...
  • 1
  • 2