MikroTik

januszzz

Thanks, you were correct. I use own DNS server and entered DNS view for the routers with static entries months ago. Happens.

januszzz

Thank you @optio, @normis! 1. Well, since docker hub was used. My point is, I shall not assume anything and simply read the manual. Current Confluence is not covering this, while I believe it should. 2. Fair enough, not relevant, I thought its reseting the storage to initial layer (docker or volume ...

januszzz

I have currently dozen of containers running on RB5009. Documentation seems to be missing some maintenance information such as: 1. Is the container stateless or stateful? upon restarting the container, its configurations and packages seem to persist. This does not look very much as docker, it works ...

januszzz

@Marlow: Not having to resort to Cisco or Juniper solutions is the point of this thread. So suggesting Juniper SRX as a solution is counter productive. Sure they exist and work. But at what pricepoint ? What? since when suggesting solution is counter productive? And SRX100 it cheaper than CCR9 so cm...

januszzz

Actually, perfect NAT64 can be build using OpenBSD.

It is extremely difficult to setup (I did not set it up, colegue did), but it shall pay off. Tayga is also OK, but its quite slow.

Alternatively, I have considered using Juniper SRX and it also SHOULD work well as I read the documentation.

januszzz

Cmon, anyone?...

januszzz

Hi, I have configured netboot server on Mikrotik to install linuxes. All is working fine for 1 concurrent installation: TFTP, DHCP, PXE is started, Linux installation data is served via FTP. 1. However, I noticed that when second and more concurrent installation is started, Mikrotk FTP stops respond...

januszzz

At least, I got really pi&#$d off with this dude, as it eat my CPU. To solve this stubborn Netinstall problem just disable all interfaces (tun, vbox wlan etc) in Windows, leave only single poor ethernet. Now Netinstall manages to see the device. Very gentle. Did reinstall, no more Dude. No more ...

januszzz

Well, I really can't. Have tested all the stuff, Netinstall is just f*#ed up somehow. I've tested on two Windows 7, one Wine with firewalls definately disabled, pcap removed, wireshark disabled just in case, it really listens on udp 67 but stil - Nothing, its deaf. Oh, and btw I can boot linux easil...

januszzz

Hello, I'm fighting since few days to remove Dude from my router. I have access to the Dude interface, I have also access to the RB493G. So: the package dude.npk is missing, dude is running. The rest of packages is 6.19. I tried Netinstall, but unfortunately it doesn't boot the device (wireshark sho...

januszzz

True. Nice api btw. If im again in mt i will definately look at it.

januszzz

Nice performance :-) I will get this to myself, even though... I can't use the PHP here ;-) the thing was I needed more than adding users the way to sms them with their creds... I've also got squeezed the forum and found working enough solution: http://forum.mikrotik.com/viewtopic.php?f=2&t=6061...

januszzz

for example, there is a script just for log monitoring:

http://wiki.mikrotik.com/wiki/Manual:Sc ... _log_entry

but how to make it actually run something?...

januszzz

It's pretty trivial to make a form that would add the user via "User Manager", then automatically writes a log entry and sends an SMS via "/tool sms". yeah, you say pretty trival... im fighting this since 2 hours without any luck and its all yuck :-) 1. user manager doesn't send...

januszzz

You could use something like FreeRADIUS to store users in. I think it has a dedicated field for a phone, though I'm not sure honestly. The actual procedure of "sending an SMS upon registration" is something you'll need to either do yourself (via your own app - be it a web or desktop one),...

januszzz

Hello, I would like to add an user to the Hotspot and would like to send the sms to the client with his new username / password to the hotspot. there are two questions: 1. which is better: to add through the Webfig to internal user database, or to the userman database (I find userman limited, as it ...

januszzz

Hello,

so I guess its impossible to get the time in seconds since 1970-01-01 00:00:00 UTC in any current RouterOS directly?

I need to count users' session time and parsing rsyslog precision time is harder than log in date +%s.

januszzz

Hello, I have a customer who has end users. These end users need: 1 to login to the network and see landing page which is Terms Acceptance page, 2 if the end user accepts, he is allowed to Walled Garden (single http site). 3 once end user becames bored with the landing page, he decides to move on an...

januszzz

Fortunately thats not me who is affected then;-) but I'm to put 400/50 mbit traffic next week on it and like always I pray MT won't fail for any other unsuspected reason. Sometimes it does and workaround or replacement to other vendor is needed.

januszzz

Thank you, but that's impossible for now. Machine is 80km away and I have single interface configured (as you can see, with 8 vlans). Anyway, has Mikrotik confirmed this or what? if so, I'll try that later on. And I do have separate access to the switch. Both sides (switch and router) says autonegot...

januszzz

Deleted because unrelated.

januszzz

EDIT: fixed. The problem was unrelated to MT CCR. The link is buggy and traffic was routed through another paths. Deleting this thread is up to forum admins. Hello, I'm experiencing very strange problem: I have NAT for customers and I can't reach more than 2mbit/s when downloading from internet :? ....

januszzz

Possibly asked before ten thousand times ...

Will it metarouter be supported on CCR? What are the plans?

I'm asking because I would really need freeradius and no don't really want new linux box.

Thanks.

januszzz

Hello,

anyone willing to sum up the bugs? I'm planning to buy CCR for some simple routing, filtering, hotspot and queues. Will it do or I'm asking for troubles?

J.

EDIT: traffic about 250-700Mbit/s download, 100-200Mbit/s upload

januszzz

There is such a thing as a 1GB crossover cable.

I have only 4 (four) wires.

januszzz

Hello, On RB493G I've just upgraded to ROS 6.0 and upgraded firmware. My uplink is Ether1 and after the upgrade it refuses to work. Accidentaly, I've took a picture of the change :-) In 5.24 the port was 100Mbit/s; the cable is four wires only so thats the maximum. In ROS 6.0 link is 1GbE and it can...

januszzz

But sorry I don't see how this can be a positive story. Never described my story as "positive" , I would rather summarize it as "f@#$%ing stressing". I also underline, that the solution is not optimal and the router itself should just work. Of course, I've confirmed the bugs bef...

januszzz

By some good karma Ive ordered also rb750up for those sites so as a last resort we'll implement daily hard reboot via poe. OK, my story is somewhat positive. During last 3 months we've deployed ~75 pieces of RB411UAHR with GTM378. Where the signal is good, there are no problems with them. What does...

januszzz

another piece of information, this time from Aruba:

http://community.arubanetworks.com/arub ... 062912.pdf

januszzz

Starting point: /system script add name=ResetExternalDeviceViaPoEOnOutage policy=ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive,api source=":if ([/ping 8.8.8.8 interval=2 count=10]\ >0) do={[/log info \"WATCHDOG: Host 8.8.8.8 is responding, sleeping.\"]} else={[/log...

januszzz

Hello, I'm having trooubles with 3G on RB441UAHR ( http://forum.mikrotik.com/viewtopic.php?f=3&t=36579&p=361518&hilit=watchdog#p361518 ) and because I have also RB750UP onsite, I would like to implement watchdog with reset of external device with PoE. Why? current watchdog is too harsh a...

januszzz

For changing modem is too late we've already deployed 40 of them. Now they seem to run ok yet it remains to be seen within certain period. Im rather mad about this. Why the f... you Mikrotik sell devices for 3g, "perfect three g device" if they're so wrong... I really would like to find mo...

januszzz

It's been 7 months already since I'm testing GTM380 and so far I had no problems, they were working fine. Setting channels was sometimes needed, but mostly everything runs out of the box. I've conducted the following tests: * one RB411UAHR was running unattended for 2 months, with some power failure...

januszzz

Hello, I've compiled the kernel for 411UAHR and composed some preliminary initrd with custom tools. I would like to boot it using RouterBOOT (currently from network, later from flash). Can I specify initrd - I'm going to run from ram only with configuration from network, later on I'll get to some pa...

januszzz

Leo, sorry for not interrupting, have you solved your issues with gtm380 option modem mentioned in your last posts? I'm continuing the train to find the only one working 3g device and of course i mean it has tobe stable. I'm to use gtm380, about one hundred. So far I'm still not sure if thats the go...

januszzz

leodio,

have you solved all of your GTM380 problems? we're about to order some dozens of these modems. I can also order different ones yet, but still need to be sure how stable they perform.

I didn't check your "fix" yet but could you provide in more brief what exactly it solves?

Thanks.

januszzz

janisk, your equipment should be fine as RB750UP have protection for power input on POE-OUT ports. and use of 2 PSUs is allowed on one router. Most of not all new designs have protection on ports, so, if you use PoE you have 0V on Pext and vice versa. input ? I'm rather afraid of RB11UAHR - what hap...

januszzz

Hello, I have read the wiki of course. According to the wiki, if the ports are set to auto-on, power is only sent over the port if resistance is detected. This will protect non-POE devices from being powered. So, you're fine. Is RB411UAHR non-poe? I usually power it using PoE. I just didn't use RB75...

januszzz

Damn simple question regarding powering two devices: 1. I'm powering RB411UAHR with jack standard plug. 2. I.m powering RB750UP with jack standard plug. Now 3. I'm connecting RB411UAHR Ether1 to RB750UP Ether2. IS it OK, or am I connecting 2 power sources and I'm to burn RB411UAHR device down? Yes I...

januszzz

power supply failures? can u explain what this have to do with RB No, that's separate issue which I was kindly asked to check by SwissWISP and I did :-) 40% damaged RB its a huge number 40% of failures on about 60 interventions means 24 times Routerboard failed somehow. During 2 years period its on...

januszzz

There were dodgy on the capacitors on the 450s a while back, this might of been the cause of the reliability issues you had? Maybe! unfortunately I'm not able to check it as we've always swapped to new ones. But I'll talk with the guys who did replace the stuff. Anyway, now I'm more interested in q...

januszzz

yes, power failures include power supply failures but still i didn't include those in the report. true, we have stopped using extremely chip poe devices and starting to use central power supply for two RB as well as for some other devices we need at site. unfortunately for now i can't precisely enum...

januszzz

Hello, I work in large company where we do (try ;-) ) to monitor hardware. We use MikroTik RouterBoards for internal low cost solutions. It appears that MikroTik have some (serious?) quality problems: * last year we've ordered 80+ RB and about 10% was returned immediately as broken, * during last tw...

januszzz

Hello, I have configured typical Nstreme Dual link using RB433AH and it works OK, but still gives poor results on small frames. According to RFC2544 set to 20Mbps it achieves: 4 mbps for 68 bytes 5 mbps for 128 bytes 11 mbps for 256 bytes 19 mbps for 512 bytes 20 mbps for 1024 bytes 20 mbps for 1280...

januszzz

Well, I just start it (metarouter with RouterOS)

januszzz

Metarouter? nooo! :-) it's still very cool, but anyway its a virtual machine (KVM on MIPS? or a container? but it boots a kernel, so rather a VM? yes?) I would rather compile the distro by myself, it should take up to one week to have initial release. I have some experience and would use squashfs an...

januszzz

Thank you, MIPS/PPC is possibly sufficient, I just wondered with what do I start. Is there any official (wiki?) article regarding for example boot process or system features / manual for a device (411 preferably)? I mostly mean the necessary things to store & boot kernel and to include all devic...

januszzz

Hello, I'm looking for a hardware to install a Linux as Router OS does not include some feeatures (1-wire, some of openvpn features, and generally cannot make use of this cool serial port it includes). The hardware needs to be cheapest as possible, because it has to be utilized in many simple places...

januszzz

Hello, blind shot - once upon a time I've somehow discovered that PIN is incorrectly delivered to OS. Solution was to put in double double quotes :-) , i.e.: ""1234"". For me it helped with Dell 5530 and some early 5.x version. http://forum.mikrotik.com/viewtopic.php?f=2&t=49...

januszzz

How to reproduce:

* install R52n-M or similar,
* login to webfig,
* change Channel Width on WLAN interface to 20/40MHz,
* login to CLI
* interface wireless print.

Export prints values properly, so that's the minor issue.

januszzz

Hello,

I did like you said:
* added single bridge with nstreme and ether1,
* added vlans on bridge1 (mgmt and working).

All fine, VLANs are separated on both sides, tried to change adress from one VLAN to another - doesn't connect so its good.

Thank you, I must have tried by myself

januszzz

Fine, but I assume you've forgot to add that Cisco/MikroTik switch would be necessary on both sides? that not a way to go unfortunately, I can't have them.

Anyway thank you very much!

januszzz

Hello, I have a Nstreme Dual link and need to make a trunk through it. Normally, what I do is to: * create trunk on Ethernet with all VLANs I need, * create trunk on Wlan with all VLANs I need, * bridge appropriate VLANs together. All done. But I realized that on Dual Nstreme I cant create VLAN on n...

januszzz

Hello, I'm rather new to The Dude and would like to ask about means of integration of it with kind of "umbrella" software. What I need is: * to have SNMP alerts on devices' failure events being sent from The Dude itself to umbrella tool (it can be implemented as a script, some kind of reac...

januszzz

Hello, there is a standard called EAP-SIM/AKA used for authorization against RADIUS. It employs SIM card as it contains credentials. It needs to be supported on both AP and RADIUS server itself, or at least - on AP only with RADIUS able to proxy the request to another RADIUS. This RADIUS / proxy val...

januszzz

From my perspective, OpenVPN stil works poorly on RouterOS (veeery slow, I'm very afraid to connect next clients and experience unavailability). Its quite stable, anyway, it works with serious limitations, but still - it works.

Haven't tested other solutions on MT.

januszzz

Hello, I'm trying to get Dell 5530 modem to connect to 3G. Modem works, I can see info, PIN is properly passed, but this just don't connect: [admin@MikroTik] > echo: async,debug usb2:0: sent ATH echo: async,debug usb2:0: rcvd OK [admin@MikroTik] > echo: async,debug usb2:0: sent AT+CGDCONT=1,"IP...

januszzz

Hello again, that't probably somewhat stupid question but please someone can enlighten me why generic user profiles are not implemented in trial user access method? Is the trial some hack around or what? Can I really not edit this profile in any way? is it set forever? I really need such feature and...

januszzz

But you can roll your own RADIUS

Interesting, but somewhat overkill for this task.Not a Radius itself, but its config for this usage appears to be complicated (I can't imagine it at the moment so it is complicated). Anyway, I'll take a moment to think about it.

januszzz

How about a script:
* on login, which reads the data of Dynamic user, deletes it, and adds static one with limitaions instead?
* on logout, which deletes the static user?

Is this a way to go? have somebody had such script developed? why he hasn't published it yet??

januszzz

probably,but that's weird :-) Trial user, even if its dynamic, gets its defaults from somewhere. That said, it appears they're being copied from somewhere and virtually there is no reason to keep their settings immutable. Within the configuration, they seem to be perfectly the same as standard users...

januszzz

Hello,

I'm willing to give trial user and need to limit its bytes in/out amount. So I have some dynamic users added with T-00:my-mac-here but without limits set.

Where can I set default *User* profile for those dynamic users? *User profile* does not include those options AFAIK.

Regards.

januszzz

We will simply not make additional features for it.

Who sits still, he moves backwards. Anyway, thanks for 5.x series.

januszzz

Is there anything new within the subject of OpenVPN i routerOS?

januszzz

In line with what Feklar said I think you're approaching this completely wrong. The issue is that your client does not trust you. That is a social problem, and there isn't a technical solution for it. Particularly since the proper solution is obvious: the client purchases equipment so that the trus...

januszzz

In line with what Feklar said I think you're approaching this completely wrong. The issue is that your client does not trust you. That is a social problem, and there isn't a technical solution for it. Particularly since the proper solution is obvious: the client purchases equipment so that the trus...

januszzz

That is easy one: 1. Perform a config export to a file; 2. Remove changing parts of that config file (second line or so has export time written out), all the rest of the config should remain static, but just in case check that also; 3. Use MD5SUM or something else over that file; 4. Compare it with...

januszzz

All right, but try to feel the situation: I'm delivering a service to the client and need VPN to my site. But the client is unable to separate Mikrotik router into VLAN network (as he has dumb router). As the client have very sensitive data inside his network, everything from behind Mikrotiks NAT (r...

januszzz

All right, thats nice.

But what if make the firewall changes, and later reset the lines in history? is there any sign of changes? version hash with date? mtime / ctime of a file?

EDIT: of course, I'm going with the firewall back to the original so config is same as previously.

januszzz

Hello, the question isn't trivial ;-) Our client has very strict environment and wants read only access to our devices. So far, so good (thats easy). But he also checks hourly if the router config has changed. Now he worries that, within the hour, we can: * modify configuration, * hack their network...

januszzz

I got workaround! Apparently, this exactly modem accepts at+cpin in double quotes on this exactly platform (Mikrotik/RouterOS), so I've tested this weird way (notice: pin=""1234""): /interface ppp-client print Flags: X - disabled, R - running 0 name="Dell5530" max-mtu=1...

januszzz

I just didn't belive that entering PIN with standard command doesn't work on this exactly model. So I've tried minicom and all seems fine: Welcome to minicom 2.4 OPTIONS: I18n Compiled on May 21 2010, 00:58:43. Port /dev/ttyUSB1 Press CTRL-A Z for help on special keys AT S7=45 S0=0 L1 V1 X4 &c1 ...

januszzz

I do have the following output: echo: async,ppp,info Dell: initializing modem... echo: async,debug usb3:0: sent ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 echo: async,debug usb3:0: rcvd OK echo: async,debug usb3:0: sent AT+CGDCONT=1,"IP","internet" echo: async,debug usb3:0: rcvd O...

januszzz

Hi, I'm using 4.16 and Dell 5530 modem. /system resource usb print # DEVICE VENDOR NAME SPEED 0 2:1 RB400 EHCI 480 Mbps 1 2:2 Dell Dell Wireless 5530 HSPA Mobile Broadband ... 480 Mbps 2 1:1 RB400 OHCI 12 Mbps [admin@3G] > /interface ppp-client add comment disable edit enable export find info monito...

januszzz

Any comments about next posts?
viewtopic.php?&p=246580&f=1#p246580

Weekend has gone, lets continue:

The user above is right, the same effect exists in rc8. Not only for user= but for all options within the /system ssh context, so they are: port, address, and user.

januszzz

if you get the crash and send supout.rif file created after the crash we can work with that too. but it should be version as new as possible.

Well, supout.rif is included above. This is from RouterOS 5.0rc8 sent by sergejs to me.

januszzz

I know that it isn't listed on http://wiki.mikrotik.com/wiki/Supported_Hardware but it may be similar/work on the same driver.

Anyone tried?

januszzz

thank you for details about saturated link. i was trying this on 1GBit network. Where NAND is too slow to saturate it with upload/download I suppose one can use wireless link too. If you were to not reproduce the effect (very unlikely), in the middle of the next week I'll provide you with MT which ...

januszzz

it is as intended - if you add ssh-key to user account user will not be able to login using username/password. Use of key is required in this case. Sorry, I didn't know, but this is fair with me. edit: also, what you mean by crashes? i tried your scenario on ppc and mipsbe, but ssh did not crash in...

januszzz

sergejs, I have upgraded with the file provided, but still when I add a key to an user, he is unable to login using password (from different machine, for example). Shall we continue via support@ email channel; I can provide you with further info you may ask for. EDIT: unfortunately, I am able to rep...

januszzz

Sent; shall I attach supout.rif too?

januszzz

Hi, I'm experiencing serious ssh crashing. It crashes in a lot of different ways in very different circumstances. Reproducible: always. How to reproduce: 1. /user ssh-keys import user=admin file=id_dsa.pub 2. use scp to copy a file (I copy 20MB) Result during scp (from host with id_dsa) ssh -l admin...

januszzz

januszzz, changelog does not contain every change/fix/addon, that are made to MikroTik RouterOS. All clear. But why? is it just too hard to maintain or you try to keep minor changes outside of clients' eye? Keeping changelog up to date is what many appreciate in any kind of project, so frankly spea...

januszzz

Thank you, fine.

Could you point me to the changelog entry where I can find entry about the bugfix/feature addon?

regards.

januszzz

Hi, I'm having RB800 and I would like to draw temperature changes during the year. Ideally, I would like to acquire the temperature over SNMP request, but having output like probably means I cannot: /system health print oid active-fan: .1.3.6.1.4.1.14988.1.1.3.9.0 voltage: .1.3.6.1.4.1.14988.1.1.3.8...

januszzz

Could someone tell me for what is Windows only crap tunneling protocol good?

its an open standard and can possibly be implemented in more devices. Mikrotik choose it and I can use it as it is stable enough and fits my purposes. Now it does not fit, but it may one day.

januszzz

it's an open standard, you just have to wait until somebody makes support for linux. We made it for RouterOS after all Very nice, but I don't believe you :-) there are waaay to many issues on this forum reported and this means you got no single working, full-featured SSL VPN in RouterOS (even stabl...

januszzz

we have stopped developing OpenVPN in favor of SSTP OK, didn't notice that. Sorry to hear, as SSTMP isn't cross platform (doesn't work on Linux). EDIT: Well, what I didn't know is that SSTMP is available only on development version of RouterOS. It means that you've dropped SSL VPN support from Rout...

januszzz

Hello,

whats the status of OpenVPN in RouterOS? what its future in RouterOS? is there a road map for it? can we safely plan deployment of OpenVPN on RouterBoard boxes only?

Why there is no single page about OpenVPN on the wiki?

I would be very thankful for answers - thank you.

Janusz.

januszzz

Hi there,
I'm trying to create a high temperature script

btw: is there an OID to get the rb800 CPU temperature at all? I don't see it in Mikrotik.mib.

januszzz

Hi, maybe you're interested in this - UM in next version has been completely rewritten -

http://forum.mikrotik.com/viewtopic.php ... 14&start=0

januszzz

If you don't like it, all changes will go into the next iteration, because usermanager has been completely rewritten

I assume you mean version 5beta here? EDIT: yes.

BTW:
I'm not the only one struggling with versions apparently:
http://forum.mikrotik.com/viewtopic.php?f=10&t=41378

januszzz

The other package is significantly different, plus the "stable" you use hasn't been developed in a long time, and if there are bugs, there will be no fixes. Hey, isn't this package on your main website marked as stable , tailored exactly for device one have? :-) Apparently you say it is n...

januszzz

I assume I'm using stable version, as I've downloaded the "All packages" zip file from mikrotik.com website

I've chosen stable version for RB400 series; I avoid to use betas and testing versions (currently).

januszzz

Don't know, I've just upgraded to this version as I wanted user manager package. After writing last post, I've also found that after reset-configuration when all information in the menu is still available, removing only customer wipes the rest of information, whatever it is. Is this behavior correct?

januszzz

RouterOS doesn't reset-configuration of /tool user-manager when requested by /system reset-configuration.

How to reproduce:
1. configure /tool user-manager
2. /system reset-configuration
3. after trhe reboot /tool user-manager export

Feature?

januszzz

about VNC - what is the point to use graphical interface for command line interface? Well, just wondering what the difference is :) there are many situation when you have no route to your virtual machine from your desk. Proxmox provides very robust vnc to every machine, with performance and stabili...

januszzz

Hi, there are plenty of posts regarding Dude on Linux, but AFAIK none of them asked about Dude as a precreated appliance. I know that MikroTik guys just prefer Windows operating systems, which is not truly supported by Linux community ;-), but I find it legacy and obsolete, mainly because there are ...

januszzz

I got some issues with VPN last days, but I've make it working perfectly. See my posts here, full examples included.

http://forum.mikrotik.com/viewtopic.php?f=2&t=35555

Just it, works.

januszzz

Thanks fewi for your tips! yes, I've tried tun interface but OpenVPN warned me that I'm using inconsistent devices, inconsistent MTU, etc. So I corrected; neverthless, this is very good tip as tun interfaces are much more polite on my system. As far as it goes to RouterOS I'm done today, as I've cut...

januszzz

Ok, so here is short summary. I wanted to setup Linux OpenVPN server and RouterOS OpenVPN client. There are some gotchas and this needs to be said: - RouterOS VPN client works only with TCP, - it doesn't work with LZO compression, - it doesn't resolve DNS queries (needs IP address instead of FQDN), ...

januszzz

Ok, partial success - I abandoned the certificates, got vpn link on. Hosts doesn't see each other yet, but I may have some bad entries / routing yet. Ok, not done for today - now I have linux server config: port 1194 proto tcp dev tap ca ca.crt cert server.crt key server.key dh dh1024.pem plugin /us...

januszzz

I'm generating keys using easy-rsa bundled with openvpn: ./buil-key client Then, I copy them to the routerboard scp keys/client.crt admin@172.16.1.2:/files scp keys/client.key admin@172.16.1.2:/files I also copy ca.crt file: scp /etc/openvpn/ca.crt admin@172.16.1.2:/files # Yes, I've diffed ca.crt f...

januszzz

1. user is the username you'd use to log into the VPN server 2. password is the password you'd use to log into the VPN server Ok, no certificates, that's fair enough. So I've reconfigured OpenVPN server to allow connections with username/passwords (hope it works, no experience here). But still I go...

januszzz

I have working Linux OpenVPN server and I'm trying to setup RouterOS (actually, ten of them:-) as a client(s). I haven't found any documentation, except the wiki article famous on this forum of being unprofitable (gotchas like udp on linux server for routeros are not so funny). My server config is: ...

Search found 105 matches