Community discussions

Search found 1223 matches

  • 1
  • 2
  • 3
  • 4
  • 5
  • 25
by mistry7
Tue Jul 09, 2019 8:41 am
Forum: RouterBOARD hardware
Topic: Bunch of fried hAP ac - trash?
Replies: 4
Views: 449

Re: Bunch of fried hAP ac - trash?

Die you try netinstal?
by mistry7
Thu Jun 27, 2019 9:37 am
Forum: Wireless Networking
Topic: Signal Strength
Replies: 3
Views: 565

Re: Signal Strength

it is wifi..... Signal Strength : -53/-56 is good signal strange for 50km and shows that you are running with maximum power where are you from? Signal Strength : -37/-36 ist higher and that's one point why you got better bandwidth the next think you need to check is ccq what is real? 1.5 Km distance...
by mistry7
Thu Jun 27, 2019 9:35 am
Forum: Wireless Networking
Topic: Signal Strength
Replies: 3
Views: 565

Re: Signal Strength

it is wifi..... Signal Strength : -53/-56 is good signal strange for 50km and shows that you are running with maximum power where are you from? Signal Strength : -37/-36 ist higher and that's one point why you got better bandwidth the next think you need to check is ccq what is real? 1.5 Km distance...
by mistry7
Mon Jun 24, 2019 9:26 pm
Forum: Wireless Networking
Topic: MU-MIMO?
Replies: 20
Views: 6782

Re: MU-MIMO?

Two years...
And nothing...
wait for Ros 7
lol
by mistry7
Sun Jun 23, 2019 10:05 pm
Forum: Wireless Networking
Topic: wifi 1km?
Replies: 1
Views: 220

Re: wifi 1km?

With no sight this is impossible
by mistry7
Mon Jun 17, 2019 9:16 am
Forum: Wireless Networking
Topic: Configuring a Wireless Wire Dish as a switch ?
Replies: 2
Views: 228

Re: Configuring a Wireless Wire Dish as a switch ?

, is it possible to configure both master and slave units of Wireless Wire Dish as switches ?

WAN ---- Main switch ----- Master dish ------ Slave Dish ---- Secondary switch

Best regards
What you need is a Bridge config, and the Dish set Is a P2P Bridge out of Box
by mistry7
Sun Jun 16, 2019 6:30 pm
Forum: Beginner Basics
Topic: Need help 2x SXTsq PTP bridge
Replies: 6
Views: 359

Re: Need help 2x SXTsq PTP bridge

First Upgrade to 6.44.3 and then Test
by mistry7
Thu Jun 13, 2019 10:34 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 538
Views: 54938

Re: LHG 60G experience

For QinQ you need MTU of 1522, LHG has L2 MTU 1598, so QinQ is No Problem
by mistry7
Wed Jun 12, 2019 1:28 am
Forum: Beginner Basics
Topic: RBwAPG-60ad distance =0.0 ?
Replies: 10
Views: 492

Re: RBwAPG-60ad distance =0.0 ?

Ok i Missed that.
Do you Use the latest ROS?
is there a reflective surface ain the near?
by mistry7
Tue Jun 11, 2019 9:21 am
Forum: Beginner Basics
Topic: RBwAPG-60ad distance =0.0 ?
Replies: 10
Views: 492

Re: RBwAPG-60ad distance =0.0 ?

Newer Windows: The metallic vapor deposition on the inner pane is transparent to the high-energy short-wave solar radiation. If the sun's rays hit your furniture, walls, ceilings, etc., they absorb the energy from the sun's rays, store it in between, and then release it as heat radiation. The resul...
by mistry7
Mon Jun 10, 2019 12:35 pm
Forum: Beginner Basics
Topic: RBwAPG-60ad distance =0.0 ?
Replies: 10
Views: 492

Re: RBwAPG-60ad distance =0.0 ?

What Kind of Windows?
A newer One?

Use something like this to mount it outside!
https://www.bueromarkt-ag.de/saugheber_ ... oCXEvw_wcB
by mistry7
Mon Jun 10, 2019 11:35 am
Forum: Beginner Basics
Topic: RBwAPG-60ad distance =0.0 ?
Replies: 10
Views: 492

Re: RBwAPG-60ad distance =0.0 ?

how it is mounted? Reflections?
by mistry7
Sun Jun 09, 2019 3:58 am
Forum: Wireless Networking
Topic: Experience with PtP Wireless Wire Dish link
Replies: 3
Views: 447

Re: Experience with PtP Wireless Wire Dish link

Our links under 500m Did not disconnect since installing, this is more Then 12 Month
by mistry7
Sun Jun 09, 2019 3:54 am
Forum: General
Topic: Mikrotik Warrany where in USA?
Replies: 2
Views: 275

Re: Mikrotik Warrany where in USA?

Where die you Buy it? Speak with your Dealer
by mistry7
Sat Jun 08, 2019 3:06 pm
Forum: General
Topic: CANNOT PING MAIN OFFICE LAN DEVICES USING EOIP OVER L2TP WITH IPSEC
Replies: 8
Views: 440

Re: CANNOT PING MAIN OFFICE LAN DEVICES USING EOIP OVER L2TP WITH IPSEC

Yeah and I am a newbie seeking some help. Clearly, your english is worse than my config. Thanks anyway. ✌🏽
This is more about a smartphone and a non english auto correction
by mistry7
Sat Jun 08, 2019 8:13 am
Forum: General
Topic: CAPsMan Error
Replies: 4
Views: 305

Re: CAPsMan Error

please post your config
by mistry7
Sat Jun 08, 2019 5:25 am
Forum: Beginner Basics
Topic: Block IP adress trying to access RDP
Replies: 10
Views: 610

Re: Block IP adress trying to access RDP

Think about VPN and not limiting .......
From Outside direct avaible Services will be Hacked in some case

Look at winbox hack
Look to ubnt
Look were you want, direct exposed Services are an invitation
the only was to do Secure this, is yousing a VPN
by mistry7
Sat Jun 08, 2019 5:15 am
Forum: General
Topic: CANNOT PING MAIN OFFICE LAN DEVICES USING EOIP OVER L2TP WITH IPSEC
Replies: 8
Views: 440

Re: CANNOT PING MAIN OFFICE LAN DEVICES USING EOIP OVER L2TP WITH IPSEC

This Konfig is more Then Worse.... Why L2TP If you Are yousing EOIp Instead ? ( you can do IPSec with eoip directly) And for dyn. IPs there Are other ways, like DynDNS and scripts But EOIP over the Internet will end in MTU Problems Why you don’t yousing L2tp for Bridging? https://wiki.mikrotik.com/w...
by mistry7
Thu Jun 06, 2019 10:31 pm
Forum: Wireless Networking
Topic: "wAP ac kit"
Replies: 2
Views: 327

Re: "wAP ac kit"

Looks like a copy of cap ac with PCIe Slot

Hopefully with POE pass trought
by mistry7
Thu Jun 06, 2019 11:40 am
Forum: Wireless Networking
Topic: RBwAPG-60adkit - no wireless multiple vlan trunk
Replies: 3
Views: 312

Re: RBwAPG-60adkit - no wireless multiple vlan trunk

What so you want to do?

Transparent Bridge?
If yes remove all VLAN Interfaces on WAPs and Disable VLAN Filtering on Bridge, you don’t need that.

If you not want Transparent Bridge we need more Info what you want to Archive
by mistry7
Tue Jun 04, 2019 1:10 am
Forum: RouterOS v7
Topic: RouterOS v7.0 beta1 - when?
Replies: 537
Views: 129170

Re: RouterOS v7.0 beta1 - when?

I just want to let everyone know, that v7 is progressing pretty good this year, and most core functionality is usable. Some more difficult parts need to be done and we can release a public beta.
Can you give some information on what kernel it will be using 4.x or 5.x?
4.xx
by mistry7
Mon Jun 03, 2019 11:07 pm
Forum: RouterOS v7
Topic: RouterOS v7.0 beta1 - when?
Replies: 537
Views: 129170

Re: RouterOS v7.0 beta1 - when?

We droped Mikrotik out of our Core, IPV6 is needed more Then Ever, we will obtain last avaible IPv4 address in the Next 3-4 Month, and Then we need to start CGN NAT
by mistry7
Mon Jun 03, 2019 6:44 am
Forum: Wireless Networking
Topic: Optimize SXT Lite 5 PtP Link , bad CCQ
Replies: 4
Views: 543

Re: Optimize SXT Lite 5 PtP Link , bad CCQ

Hi, it´s for about 500 meters and with 100 mbps aggregate it´s sufficient...

Finally.... lot of tests.... lot of configs, solved with a pair of nanobeam ac gen2

Thanks !!
For 500m you Better Choose a 60Ghz Product
by mistry7
Sun Jun 02, 2019 11:01 am
Forum: Wireless Networking
Topic: LHG 60GHz Wireless Wire [SOLVED]
Replies: 3
Views: 362

Re: LHG 60GHz Wireless Wire [SOLVED]

You need to Remove the w60g-Station Interface, After a connect it is created new
by mistry7
Sat May 25, 2019 10:25 am
Forum: Wireless Networking
Topic: W60G max 8 stations?
Replies: 1
Views: 204

Re: W60G max 8 stations?

If i remember right Normis told us it is Hardware Limit
by mistry7
Sat May 25, 2019 6:29 am
Forum: Wireless Networking
Topic: Metal G-52SHPacn Can not use 2.4Ghz and 5Ghz at same time?
Replies: 1
Views: 154

Re: Metal G-52SHPacn Can not use 2.4Ghz and 5Ghz at same time?

No there is only One Interface so it is impossible to use both Bands at the same time
by mistry7
Fri May 24, 2019 9:31 pm
Forum: Beginner Basics
Topic: Advice on backing a 60GHz link with a private DSL line
Replies: 2
Views: 222

Re: Advice on backing a 60GHz link with a private DSL line

With 60m clear LOS you van espect 1GBit with Wireless Wire you don’t need the dish
by mistry7
Tue May 21, 2019 3:39 pm
Forum: Wireless Networking
Topic: Co-locate LHG 60ad on same mount
Replies: 11
Views: 644

Re: Co-locate LHG 60ad on same mount

Which one works perfect the higher mounted one?
by mistry7
Sun May 19, 2019 10:50 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 54171

Re: ARM devices and NV2 protocol

Now time for fix 40 MHz channel in this moment max speed only 150 Mbit for TCP :( + 1 Tried to use 40MHz instead of 20MHz using nv2 many years ago on a link that was up for nearly 7 years. It was rock solid but it did not become faster than 20MHz, in fact no differences at all. Flat out speed was a...
by mistry7
Sat May 11, 2019 11:39 pm
Forum: RouterBOARD hardware
Topic: LHG Lite60 [SOLVED]
Replies: 4
Views: 445

Re: LHG Lite60 [SOLVED]

You Are in Europe?
It Did not get CE, so it is not possible to sell it in EU

viewtopic.php?t=143935
by mistry7
Sat May 11, 2019 3:56 pm
Forum: Announcements
Topic: v6.45beta [testing] is released!
Replies: 305
Views: 65990

Re: v6.45beta [testing] is released!

which is even more important for you?
maybe another fix LCD?
no, KidControl.......
by mistry7
Tue May 07, 2019 8:22 am
Forum: RouterBOARD hardware
Topic: Need 3 WiFi AC Card
Replies: 3
Views: 434

Re: Need 3 WiFi AC Card

Why Using cards in One Board and not a all Outdoor Solution like SXt / QRT / etc?
by mistry7
Sat May 04, 2019 3:45 am
Forum: General
Topic: SXT 2 Discontinued?
Replies: 3
Views: 278

Re: SXT 2 Discontinued?

On Stock in Germany
by mistry7
Thu May 02, 2019 11:28 am
Forum: Wireless Networking
Topic: WiFi4EU
Replies: 3
Views: 875

Re: WiFi4EU

Any news from Mikrotik?

Wifi4EU completed (in April 2019) the second call and other thousands of municipality will receive their voucher..

This is a very very big opportunity for Mikrotik
They will need years to get close to competitors
by mistry7
Wed May 01, 2019 5:03 pm
Forum: RouterOS v6 RC and v7 BETA
Topic: be careful! 6.44.x should not marked as stable!
Replies: 6
Views: 826

Re: be careful! 6.44.x should not marked as stable!

Yesterday we had a Sxt Link that was down for unknown reason, reboot solved it, just loose Connection and Did not Come back

SXt HG ac
802.11
P2P
by mistry7
Thu Apr 25, 2019 3:22 am
Forum: Wireless Networking
Topic: wAP 60Gx3 problem
Replies: 7
Views: 698

Re: wAP 60Gx3 problem

That is Bad news, we want to Test this Sector in the Next Week in real Setup
by mistry7
Mon Apr 22, 2019 7:11 am
Forum: General
Topic: victim of attack PPPOE
Replies: 10
Views: 753

Re: victim of attack PPPOE

Whats your Problem, of this User does not have valid usernane and Password, what should je do? This Messages Are Not an real Attack, Of the MaC Adresse change Every Time, this would I Call an attack If you do the PPPOE config on your SXT eg, this is an Mikrotik Device. Look at Mac, Look at AP Regist...
by mistry7
Tue Apr 16, 2019 2:11 pm
Forum: Wireless Networking
Topic: NV2 PtMP - good signal and ccq but low throughput
Replies: 6
Views: 551

Re: NV2 PtMP - good signal and ccq but low throughput

Well, i expected more. On 135Mpbs rate it should be 60Mbps stable with those signal levels and ccq.
135 Mpbs is max Brutto, its WiFi, with an old 54Mbit 802.11a you got about 20Mbit
And your CCQ shows that your spectrum is not clear....
by mistry7
Tue Apr 16, 2019 11:14 am
Forum: Wireless Networking
Topic: NV2 PtMP - good signal and ccq but low throughput
Replies: 6
Views: 551

Re: NV2 PtMP - good signal and ccq but low throughput

Your CCQ rates are not good, and what do you think you get with 1 Chain?
by mistry7
Mon Apr 15, 2019 1:00 pm
Forum: Wireless Networking
Topic: 3.6 Km Ptp Link -- bad RX ccq and BW [SOLVED]
Replies: 7
Views: 562

Re: 3.6 Km Ptp Link -- bad RX ccq and BW [SOLVED]

What Devices you are using?
I Think Antennas are too small for this distance
by mistry7
Wed Apr 10, 2019 10:26 am
Forum: General
Topic: LNS Server latency issues
Replies: 5
Views: 290

Re: LNS Server latency issues

Please Show :

/tool profile cpu=all
by mistry7
Wed Apr 10, 2019 9:38 am
Forum: General
Topic: LNS Server latency issues
Replies: 5
Views: 290

Re: LNS Server latency issues

how much users?
CPU using per Core?
is that a direct connection between LAC and your LNS or do you get this L2TP Tunnel over the Internet?
by mistry7
Fri Apr 05, 2019 11:59 am
Forum: RouterOS v6 RC and v7 BETA
Topic: v6 RC and v7 BETA
Replies: 126
Views: 22380

Re: v6 RC and v7 BETA

When I can use ROS v7 ?
On Christmas but you don't know the year......
by mistry7
Sat Mar 30, 2019 11:23 am
Forum: General
Topic: UKNOF 43 CVE
Replies: 223
Views: 37827

Re: UKNOF 43 CVE

Mistry7, Good call moving off of mikrotik for security reasons. I couldn't agree more. I did too for some things. Today is a security day for us Cisco fans too. There are 17 flaws to fix. Have you seen this. https://www.networkworld.com/article/3384742/cisco-warns-of-two-security-patches-that-dont-...
by mistry7
Sat Mar 30, 2019 10:37 am
Forum: General
Topic: UKNOF 43 CVE
Replies: 223
Views: 37827

Re: UKNOF 43 CVE

Mikrotik what is need to happen that you are wake up and get ROS 7 with newer Kernel ready?

ROS Kernel is from 2012!

Good for us, we removed all Mikrotik at Core Routers in the last 3 Month, because of bad BGP Speed, and Missing IPv6 PPPoE Features
No i Think that was a very good decision!
by mistry7
Fri Mar 29, 2019 6:56 am
Forum: Wireless Networking
Topic: 34km link low CCQ
Replies: 13
Views: 1066

Re: 34km link low CCQ

We have no good Experience with Mikrotik at links with more then 10km
We build them with UBNT Airfiber, they Performe much better over such distances, I have a similar link here
32km
34 dBi Dishes
36 dBm allowed
Total BW 260MBit with 40Mhz Channel
Splitt into 200 down / 60 Up
by mistry7
Thu Mar 28, 2019 10:47 pm
Forum: Wireless Networking
Topic: New standard 802.11ax
Replies: 25
Views: 6051

Re: New standard 802.11ax

is there even any AC pci cards we could test on a routerboard? There is hardware: https://wikidevi.com/wiki/List_of_802.11ax_Hardware But you need to convince MT to build a driver. Nobody builds their own drivers. The majority of the driver and software stack for the chipset is from qualcomm and ev...
by mistry7
Thu Mar 28, 2019 10:43 pm
Forum: Wireless Networking
Topic: 34km link low CCQ
Replies: 13
Views: 1066

Re: 34km link low CCQ

Is this a shot over Water?
by mistry7
Wed Mar 27, 2019 8:33 am
Forum: Wireless Networking
Topic: RB4011iGS+5HacQ2HnD-IN->AC Wifi issue
Replies: 2
Views: 337

Re: RB4011iGS+5HacQ2HnD-IN->AC Wifi issue

Your USB standart?
USB 2 maxes out at 480MBit theoretically, so 300MBit over USB2 would be good speed
by mistry7
Mon Mar 25, 2019 8:21 am
Forum: Wireless Networking
Topic: More powerful 24v power supply for Powerbox?
Replies: 2
Views: 482

Re: More powerful 24v power supply for Powerbox?

Use better cables!
  • 1
  • 2
  • 3
  • 4
  • 5
  • 25