Community discussions

Search found 1314 matches

by mistry7
Wed Oct 09, 2019 6:09 am
Forum: RouterBOARD hardware
Topic: 100 % CPU on some Routerboards
Replies: 9
Views: 1349

Re: 100 % CPU on some Routerboards

We saw this on old 300 MHz RBs and sometimes on 400MHz RB411
by mistry7
Wed Oct 09, 2019 6:07 am
Forum: Wireless Networking
Topic: Devices supporting 80+80 MHz or 160 MHz channels 802.11ac
Replies: 2
Views: 642

Re: Devices supporting 80+80 MHz or 160 MHz channels 802.11ac

the 4011 is the only device currently supporting 80+80 and 160, however, I have yet to get either of those modes to work.
The audience with QCA9984 has this to
by mistry7
Mon Oct 07, 2019 11:52 am
Forum: Wireless Networking
Topic: Point to Point Wireless Security
Replies: 10
Views: 2271

Re: Point to Point Wireless Security

We will set APs on the roof so there will be clear line between 2 site. For the Mikrotik product, we consider to use QRT 5 ac. How do you think about QRT 5 ac? The Solution we Use is RF Elements Dish 550 at this distance, you can Use it Mikrotik / Mimosa or UBNt, just choose the right Adapter, for ...
by mistry7
Mon Oct 07, 2019 7:20 am
Forum: Wireless Networking
Topic: Point to Point Wireless Security
Replies: 10
Views: 2271

Re: Point to Point Wireless Security

Thank you guys for your advice. At first we also think about Ipsec tunnel, but I know it will cause bandwidth slow, Is there anyway to measure how slow they are when using Ipsec compare without using Ipsec? The factories locate on the hill surrounding by tree so I think there is no effect on point ...
by mistry7
Sun Oct 06, 2019 7:58 pm
Forum: Wireless Networking
Topic: Point to Point Wireless Security
Replies: 10
Views: 2271

Re: Point to Point Wireless Security

What Country and have you clear line of side to the Second Point?
by mistry7
Sun Oct 06, 2019 1:58 am
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14280

Re: NV3

Guys I am mikrotik fun we are on the same sinking boat we have to talk about real world where mikrotik losses in both scenarios PtP and PtMP and where other vendors outperforms it We still use mikrotik for PtMP on new towers but we have to split a 60° AP in 2 or 3 QRT ac to have the same performace...
by mistry7
Sun Oct 06, 2019 1:45 am
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14280

Re: NV3

A real example please scampel. If we don't believe it. we are art theory See my last post for an example of an LHG XL 5 set to a 5MHz Channel :-) Unfortunately I am guilty of oversharing my knowledge on some of the things Mikrotik's are capable of. I shouldn't have mentioned the 30Mhz feature as th...
by mistry7
Sun Oct 06, 2019 1:42 am
Forum: RouterBOARD hardware
Topic: DISC Lite5 ac PtP NV2 Hickups and generally disapointing performance
Replies: 15
Views: 3788

Re: DISC Lite5 ac PtP NV2 Hickups and generally disapointing performance

Welcome, there is nothing wrong on your Setup, Limit transmit Power would possible gives a Bit more speed (you are about -34, this is to much, -50 ist ideal) But for real ac Speed you Choose the wrong vendor I agree on the TX-Power. Also what method of speed test is being used and are you running i...
by mistry7
Sat Oct 05, 2019 11:04 am
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14280

Re: NV3

A real example please scampel. If we don't believe it. we are art theory See my last post for an example of an LHG XL 5 set to a 5MHz Channel :-) Unfortunately I am guilty of oversharing my knowledge on some of the things Mikrotik's are capable of. I shouldn't have mentioned the 30Mhz feature as th...
by mistry7
Sat Oct 05, 2019 11:02 am
Forum: RouterBOARD hardware
Topic: DISC Lite5 ac PtP NV2 Hickups and generally disapointing performance
Replies: 15
Views: 3788

Re: DISC Lite5 ac PtP NV2 Hickups and generally disapointing performance

Welcome,

there is nothing wrong on your Setup, Limit transmit Power would possible gives a Bit more speed (you are about -34, this is to much, -50 ist ideal)

But for real ac Speed you Choose the wrong vendor
by mistry7
Fri Oct 04, 2019 11:02 am
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14280

Re: NV3

it is not clear to me if mikrotik is still betting on the wisp or not ... Mikrotik have many advantages for small WISP's - their low cost CPE and low cost AP's are great. 120 Degree sectors work really well for low density rural sites, Ive been involved in deploying many mANT15's and we get 20-50Mb...
by mistry7
Sun Sep 29, 2019 8:59 pm
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14280

Re: NV3

I've tried from a ccr and I only get 10 megabytes more ... Mistry7 hace the sale problem and need a solution too
Our Solution is clear, we spent about 15-20k € Every year in Mikrotik this year under 2k, because Mikrotik is Legacy!
by mistry7
Sat Sep 28, 2019 11:39 pm
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14280

Re: NV3

The very first thing you should do is to stop using built-in btest tool (bandwidth test). It is known to be CPU hungry on its own. When testing bandwidth, always do it through device you test, and never to/from that device. Disclaimer: I am just pointing to an obvious mistake here. I'm not in any w...
by mistry7
Sat Sep 28, 2019 1:59 pm
Forum: General
Topic: {ASK} upgrading SXT
Replies: 7
Views: 675

Re: {ASK} upgrading SXT

There Are some Wireless changes After 6.41!
Country Settings, Channel usage is more strict and
New options like Outdoor/ indoor could make Problem
by mistry7
Sat Sep 28, 2019 1:07 pm
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14280

Re: NV3

@mistry7 +1000 other Manufacturer with "M" shows giant gap in between protocols. . Right, and i cant believe that Mikrotik cannot do the same, if they want to, i do not see anything going forward ....... There are no new things for WISP after release of AC Hardware.... No Step forward in 5 Ghz, and...
by mistry7
Sat Sep 28, 2019 12:10 pm
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14280

Re: NV3

Another Thing P2P: clean 40 MHz , 8 km , RF-Elements 550 Dish, TPA-RBC with RBM11G and R11e-5HacD Receive Signals about -62, Clear LOS, Clear Fressnel, CCQ jumping from 85-99% Max Throughput with 802.11ac about 130Mbit Ping about 1-15ms with NV2 under 90 Mbit, NStreme not usable, often disconnects E...
by mistry7
Sat Sep 28, 2019 12:01 pm
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14280

Re: NV3

Perhaps a change of frequence would correct that. Most of the times i get the best results in ptp and ptmp links with either nstreme or nv2... Anyways, nice mistry7 :D :D With Ac equipment i don´t see this Bildschirmfoto 2019-09-28 um 11.01.01.png Without spectrum scan, i would choose this channel,...
by mistry7
Sat Sep 28, 2019 11:26 am
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14280

Re: NV3

mistry7 do you get better resutls with nstreme or nv2?
Nstreme about 60-70 MBit
Nv2 around 80 MBit

And this is not an Busy area
by mistry7
Sat Sep 28, 2019 10:06 am
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14280

Re: NV3

Yes, it does bring something :D You are one person complaining here, but there are thousands of successful setups out there, where nobody has the need to come into forums with their complaints. If you have something wrong, how about instead of baseless complaining, you actually post a question like...
by mistry7
Sat Sep 28, 2019 8:32 am
Forum: RouterOS v7 BETA
Topic: Special instructions for installing RouterOS 7 beta2 ? [SOLVED]
Replies: 2
Views: 1384

Re: Special instructions for installing RouterOS 7 beta2 ? [SOLVED]

Install latest 6.46 Beta, and Then ROS7
by mistry7
Thu Sep 26, 2019 10:03 pm
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14280

Re: NV3

and here ends this forum topic. always the same, any person defends the brand but nobody shows even an antenna speed test to prove it and how not always blame the bad configuration.
And no answer to that what i wrote
by mistry7
Wed Sep 25, 2019 9:50 pm
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14280

Re: NV3

...not useable for busy arears (when i do scan at worst place on Omnitik i see about 25 Networks) Sorry but i do not agree with you.... I got many ptp and ptmp links in busy areas inside the city that perform as expected... What is expected? What plans you are offering? we have 50 / 75 / 100 and 20...
by mistry7
Wed Sep 25, 2019 9:12 pm
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14280

Re: NV3

This is true mikrotik?
Silence is your answer....
by mistry7
Wed Sep 25, 2019 9:37 am
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14280

Re: NV3

this is the harsh reality ... any manufacturer today offers better results and the worst is the way to deal with the situation that Mikrotik has ... a few months ago I changed quite a lot for this problem and if from here at the end of the year the ac does not improve ... I will have to change the ...
by mistry7
Tue Sep 24, 2019 9:44 pm
Forum: General
Topic: Unidentified traffic on the pppoe server.
Replies: 8
Views: 595

Re: Unidentified traffic on the pppoe server.

For a long time I have been struggling with the problem of a strange increase in traffic on various devices. This increase spreads all over the network on all devices. It reaches 80-100Mb, it happens every few minutes. I see pppoe protocol on Torch, but I don't see the source or destination IP addr...
by mistry7
Tue Sep 24, 2019 9:07 am
Forum: Wireless Networking
Topic: SXT LTE --> SXT --> SXT == Winbox issue [SOLVED]
Replies: 4
Views: 415

Re: SXT LTE --> SXT --> SXT == Winbox issue [SOLVED]

What more is Users on CPE?

Station Bridge?
Assign the IP Adress to the Bridge and not to the Wireless Interface
by mistry7
Mon Sep 23, 2019 2:37 pm
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14280

Re: NV3

So you are saying that you need new protocol, because nv2 doesn't work, because you have interference. And you blame 802.11ac ? With 802.11ac, Polluted Spektrum, in PTMP it is impossible to deliver jitter free Internet and VoIP Service There is TDMA needed and NV2 archives more than poor speeds wit...
by mistry7
Mon Sep 23, 2019 2:17 pm
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14280

Re: NV3

From what I see nv2 is an old protocol, I must use a new protocol: 802.11ac that loses packets. sorry for the waste of time for the question. I thought mikrotik was solving the nv2 with ac but I see that "it is solved already" Greetings.
There is No Future for WISP with Mikrotik Wireless!
by mistry7
Mon Sep 23, 2019 10:17 am
Forum: Wireless Networking
Topic: SXT LTE --> SXT --> SXT == Winbox issue [SOLVED]
Replies: 4
Views: 415

Re: SXT LTE --> SXT --> SXT == Winbox issue [SOLVED]

Post your config on the both Wireless Sxt
by mistry7
Mon Sep 23, 2019 8:10 am
Forum: Wireless Networking
Topic: NO 10 MHZ band on netbox 5????
Replies: 3
Views: 374

Re: NO 10 MHZ band on netbox 5????

Ok , I pulled another netbox out of inventory and checked it's settings and found the 10 mhz band accessible . If I try on the original unit , no matter the country code , as soon as I select 10mhz from the drop down , the channel goes to auto with no other option. Seems I have a flaky unit. Then y...
by mistry7
Sat Sep 21, 2019 10:35 pm
Forum: Beginner Basics
Topic: PPPoE with VX-160CE on not working CRS125
Replies: 8
Views: 839

Re: PPPoE with VX-160CE on not working CRS125

Looks like you don’t have Sync (Telekom Vectoring)?? I'm not really sure. This is what my FritzBox says: DSL aktiv seit: 18 Minuten VDSL2 17a G.Vector (ITU G.993.5) Internet > DSL-Informationen Empfangsrichtung Senderichtung DSLAM-Datenrate Max. kbit/s 63680 12736 DSLAM-Datenrate Min. kbit/s 1152 -...
by mistry7
Sat Sep 21, 2019 12:21 pm
Forum: Beginner Basics
Topic: PPPoE with VX-160CE on not working CRS125
Replies: 8
Views: 839

Re: PPPoE with VX-160CE on not working CRS125

Looks like you don’t have Sync (Telekom Vectoring)??
by mistry7
Thu Sep 19, 2019 8:30 pm
Forum: General
Topic: NO DETECT SXT 5ND
Replies: 4
Views: 518

Re: NO DETECT SXT 5ND

Replace this old one
by mistry7
Wed Sep 18, 2019 10:27 am
Forum: Wireless Networking
Topic: Wireless clients packet loss & high latency
Replies: 6
Views: 886

Re: Wireless clients packet loss & high latency

You Clients have Bad Signals, everything under -65 is real bad
by mistry7
Wed Sep 18, 2019 8:51 am
Forum: Scripting
Topic: script log and choice the best frequency between 5000-5900
Replies: 1
Views: 307

Re: script log and choice the best frequency between 5000-5900

by something with spectral scan and you don't need such tase of time!
by mistry7
Sat Sep 14, 2019 10:34 pm
Forum: RouterBOARD hardware
Topic: WAPG60ADM new 60 GHz product
Replies: 17
Views: 2362

Re: WAPG60ADM new 60 GHz product

And this:
DC322723-8147-4A78-9DB6-4BAAA2E6B85E.jpeg
by mistry7
Sat Sep 14, 2019 7:20 am
Forum: Beginner Basics
Topic: PPPoE with VX-160CE on not working CRS125
Replies: 8
Views: 839

Re: PPPoE with VX-160CE on not working CRS125

Hi Christian,

What does the led on the side of the Modul indicates? Is the Sync complete?
Try to set SFP to 1GBit without auto Negotiation
What DSL Speed you Are getting?
by mistry7
Thu Sep 12, 2019 9:57 am
Forum: Wireless Networking
Topic: Help me increase quality of this 3km link
Replies: 5
Views: 635

Re: Help me increase quality of this 3km link

Here the Calculations: 5600 Mhz, 3km, 27dbI, 30dBm allowed Signal: -59.96db FSPL (free space path loss): 116.96db Fresnel-Zone ideal (80%): 7.16m Fresnel-Zone OK (60%): 5.37m So your Signal should be something like -60db, yours is 10dB off, and this is the reason why this link don't work as expected...
by mistry7
Thu Sep 12, 2019 8:01 am
Forum: Wireless Networking
Topic: Questions about alignment LHGG-60ad
Replies: 1
Views: 303

Re: Questions about alignment LHGG-60ad

Hi,

There is a Little Bit more possible...


Last Link Down Time
Last Link Up Time
Link Downs 0
Connected
Frequency 64800
Remote MAC 04:D6:AA:AF:D1:5B
Signal 85
MCS 8
PHY Rate 2.3 Gbps
RSSI -57 dB
TX Sector 26
RX Sector 96
Distance 1812.65 m
by mistry7
Wed Sep 11, 2019 11:50 pm
Forum: Wireless Networking
Topic: Help me increase quality of this 3km link
Replies: 5
Views: 635

Re: Help me increase quality of this 3km link

Clear Los?
I think your allignment is Bad
by mistry7
Wed Sep 11, 2019 8:13 am
Forum: Wireless Networking
Topic: P2P and P2MP design
Replies: 1
Views: 331

Re: P2P and P2MP design

What is the distance Point A to T?

What Bandwith is needed?
by mistry7
Tue Sep 10, 2019 9:01 am
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 118
Views: 19462

Re: 802.11ax [SOLVED]

- 802.11ac Hardware perform worse then 802.11n Well, not really.I did some tests with a single Laptop, Windows 10, Intel 8265 connected at 866 Mbit/s, clear spectrum 1. MikroTik cAP ac with IPQ4019, RouterOS 6.45.5, CH36 (80 MHz) 2. Cambium E410 with IPQ4019, CambiumOS 3.11.2, CH36 (80 MHz) TCP 1. ...
by mistry7
Sat Sep 07, 2019 6:37 pm
Forum: Wireless Networking
Topic: which of this has good signal and quality?
Replies: 6
Views: 999

Re: which of this has good signal and quality?

What devices you Are using?
Only one chain?
by mistry7
Sat Sep 07, 2019 6:36 pm
Forum: General
Topic: SXT2 power consumption
Replies: 1
Views: 355

Re: SXT2 power consumption

Normal Power Consum is 3w, and it is not prob for this supply to deliver more watts for Short time
by mistry7
Sat Sep 07, 2019 6:34 pm
Forum: Beginner Basics
Topic: Winbox connecting very slow via VPN
Replies: 1
Views: 353

Re: Winbox connecting very slow via VPN

Mtu?
by mistry7
Fri Sep 06, 2019 10:41 pm
Forum: Wireless Networking
Topic: MU-MIMO?
Replies: 24
Views: 8040

Re: MU-MIMO?

in the 6.41rc there's a new feature !) wireless - new driver with initial support for 160 and 80+80 MHz channel width; and indeed MT will have its first wave2 device, the next gen cAP with IPQ4018 (https://www.qualcomm.com/products/ipq4018) that has mu-mimo support in hw. the device received FCC ap...
by mistry7
Fri Sep 06, 2019 10:34 pm
Forum: General
Topic: Wireless redundate link with bonding
Replies: 15
Views: 1162

Re: Wireless redundate link with bonding

An example, the 5 GHz. loses its connection through DFS.
The 2.4 GHz. connection must take over immediately.
That is why I would put the two interfaces in bonding.
Ether1 = 5 GHz. link
Ether2 = 2.4 GHz. link
Looks more you Are searching for OSPF
by mistry7
Fri Sep 06, 2019 9:28 pm
Forum: General
Topic: RouterOS v7.0beta1 (ARM)
Replies: 194
Views: 35835

Re: RouterOS v7.0beta1 (ARM)

I believe we used the phrasing, much imroved BGP speed, or something like that
What is the current version of the kernel?
Linux kernel has upgraded from 3.3.5 to 4.14.131.
by mistry7
Fri Sep 06, 2019 4:59 pm
Forum: General
Topic: RouterOS v7.0beta1 (ARM)
Replies: 194
Views: 35835

Re: RouterOS v7.0beta1 (ARM)

Tried twice to install V7 on my hap ac2. Bricked the hell out if it. :D Thank MikroTik for netinstall...... Wil try beta2
Install labtest Beta before you try the Beta, that helps for me
by mistry7
Fri Sep 06, 2019 4:07 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154821

Re: RouterOS v7.0 beta1 - when?

anyone installed it on a 4011 yet?
Yup. Got 1 kernel panic so definitely would run this in lab only
and you flashed it back to 6.x?
Yes it runs about 30s so upload and Downgrade works....
by mistry7
Thu Sep 05, 2019 10:39 am
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 118
Views: 19462

Re: 802.11ax [SOLVED]

What would you do if mikrotik does not release a stable tdma protocol or new Access Points. Netmetal is a very old AP. And in the future products shown in the mums they don't have plans for new wireless products. Mikrotik seems to be focused on routing and the wireless market seems to be not their ...
by mistry7
Wed Sep 04, 2019 7:33 pm
Forum: RouterBOARD hardware
Topic: WAPG60ADM new 60 GHz product
Replies: 17
Views: 2362

Re: WAPG60ADM new 60 GHz product

Possible for the 5ghz Interface, But not for 60ghz
by mistry7
Wed Sep 04, 2019 5:26 pm
Forum: RouterBOARD hardware
Topic: WAPG60ADM new 60 GHz product
Replies: 17
Views: 2362

Re: WAPG60ADM new 60 GHz product

Multiband.........
And the FCC PDF show that this Device would be an Wireless Upgrade with 5 Gbit speed
by mistry7
Wed Sep 04, 2019 4:33 am
Forum: Wireless Networking
Topic: "Wireless Wire" Kit Reset
Replies: 1
Views: 277

Re: "Wireless Wire" Kit Reset

Download winbox in Software Download section, Open it, Klick to the neighbors tab, Klick refresh....

All your devices should be listen
Klick on the Mac of the devices , Where your ip config is False and Open it with Mac
by mistry7
Tue Sep 03, 2019 2:25 pm
Forum: Beginner Basics
Topic: Can Routers Get Infected?
Replies: 5
Views: 610

Re: Can Routers Get Infected?

If you Are using old Firmware, yes
by mistry7
Sun Sep 01, 2019 4:21 pm
Forum: Wireless Networking
Topic: wAP AC as CAP managed by CAPsMAN ?
Replies: 7
Views: 1067

Re: wAP AC as CAP managed by CAPsMAN ?

Do you use CAPs Man Forwarding or Local Forward?
by mistry7
Sat Aug 31, 2019 5:51 am
Forum: Wireless Networking
Topic: LHG 60 clone from ubiquti
Replies: 13
Views: 2056

Re: LHG 60 clone from ubiquti

The MIkrotik PCB is actually 5GHz ready, just chips are not soldered in. They must have though about it being important enough to implement it, but then it never made it into final version (why? regulation? compliance tests?). Now Ubiquity have a product with a feature MIkrotik doesn't have... it's...
by mistry7
Sat Aug 31, 2019 5:49 am
Forum: General
Topic: CRS112-8G-4S > No 100mbps fiber [SOLVED]
Replies: 11
Views: 1374

Re: CRS112-8G-4S > No 100mbps fiber [SOLVED]

This is a Switch and not an Router, your CPU is not powerfull enough for this what you Are doing you could try Fasttrack but in my opinion, you better buy something with more Power
by mistry7
Fri Aug 30, 2019 11:40 am
Forum: RouterBOARD hardware
Topic: PowerBox Pro and copper SFPs
Replies: 2
Views: 360

Re: PowerBox Pro and copper SFPs

What type of SFP?
The Mikrotik one?
by mistry7
Fri Aug 30, 2019 11:37 am
Forum: Wireless Networking
Topic: LHG 60 clone from ubiquti
Replies: 13
Views: 2056

Re: LHG 60 clone from ubiquti

Mikrotik is able to sell this units with 5 ghz Backup for the same price, but they don't listen to the market
5 Ghz Backup why?
by mistry7
Thu Aug 29, 2019 9:02 am
Forum: General
Topic: ROS7: Requests for wireless features
Replies: 7
Views: 1384

Re: ROS7: Requests for wireless features

After the last 5 years with 802.11ac we expect nothing
by mistry7
Thu Aug 29, 2019 8:59 am
Forum: General
Topic: Mikrotik Upgrade
Replies: 2
Views: 386

Re: Mikrotik Upgrade

Yes, got some DNS Error with Update function
by mistry7
Thu Aug 29, 2019 8:56 am
Forum: Wireless Networking
Topic: Two "mANT30 PA" as passive repeater. Possibly?
Replies: 3
Views: 447

Re: Two "mANT30 PA" as passive repeater. Possibly?

If you have the Space go with the biggest Antenna you Are able to buy
by mistry7
Tue Aug 27, 2019 8:42 pm
Forum: General
Topic: ROS7: Requests for wireless features
Replies: 7
Views: 1384

Re: ROS7: Requests for wireless features

You missed
Spektral Scan
by mistry7
Tue Aug 27, 2019 7:31 pm
Forum: RouterBOARD hardware
Topic: SXTG ac with L4 licence
Replies: 13
Views: 1165

Re: SXTG ac with L4 licence

Yes
by mistry7
Tue Aug 27, 2019 4:43 pm
Forum: RouterBOARD hardware
Topic: SXTG ac with L4 licence
Replies: 13
Views: 1165

Re: SXTG ac with L4 licence

If you want HQ by RF Elements 30° Horn and Use M11g with AC Module in TPA-RBC Don’t buy ARM Hardware it is BETA Stadium, don’t work as aspected! @mistry7 Hi, can you tell me what is better combination for HORN antena: RouterBOARD 922UAGS-5HPacD or RouterBOARD RBM11G with R11e-5HacD I see that on a ...
by mistry7
Tue Aug 27, 2019 3:41 pm
Forum: RouterBOARD hardware
Topic: SXTG ac with L4 licence
Replies: 13
Views: 1165

Re: SXTG ac with L4 licence

If you want HQ by RF Elements 30° Horn and Use M11g with AC Module in TPA-RBC Don’t buy ARM Hardware it is BETA Stadium, don’t work as aspected! @mistry7 Hi, can you tell me what is better combination for HORN antena: RouterBOARD 922UAGS-5HPacD or RouterBOARD RBM11G with R11e-5HacD I see that on a ...
by mistry7
Tue Aug 27, 2019 1:31 am
Forum: Wireless Networking
Topic: Non-Mikrotik AP Config
Replies: 2
Views: 339

Re: Non-Mikrotik AP Config

If you don’t Use Firewall it VLAN Then it Males not difference what Port you Are yousing
by mistry7
Sat Aug 24, 2019 9:45 pm
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 118
Views: 19462

Re: 802.11ax [SOLVED]

We need asap something like EPMP3000 mu-mimo 4x4 with GPS sync compatible with NV2 and 802.11N/AC client
and spectral scan / history working
by mistry7
Sun Aug 18, 2019 9:29 pm
Forum: Beginner Basics
Topic: Increase download limit
Replies: 2
Views: 589

Re: Increase download limit

Export your complete config
by mistry7
Wed Aug 14, 2019 12:29 pm
Forum: General
Topic: Detect pptp attack
Replies: 5
Views: 1011

Re: Detect pptp attack

because i never had luck with the L2TP/IPsec with the mikrotik. In my mind its to complicated and with every new version something is not working. With the pptp i never had this problems. Thats not true we use it on all sites, and it has no problems, most user problems are Firewall related. PPtP is...
by mistry7
Wed Aug 14, 2019 12:00 pm
Forum: Wireless Networking
Topic: RBLHGG-60adkit in the mountains
Replies: 6
Views: 836

Re: RBLHGG-60adkit in the mountains

Hello everyone, I plan to use RBLHGG-60adkit in the mountains. The distance between the two RBLHGG-60Ghz will be 2Km. Possible yes, but you will loose the connection ins Rain and snow I have a question about the stability of the link in under conditions of rain, fog and snow. Depends on the rain re...
by mistry7
Wed Aug 14, 2019 9:02 am
Forum: General
Topic: Detect pptp attack
Replies: 5
Views: 1011

Re: Detect pptp attack

Why you Are Using PPTP, it is outdated, and a Risk.
Why not L2tp with IPSec it is easy to Use as PPTP
by mistry7
Tue Aug 13, 2019 11:26 pm
Forum: Wireless Networking
Topic: CAPsMAN slow my WiFi down
Replies: 11
Views: 1706

Re: CAPsMAN slow my WiFi down

I've confirmed the problem, when I use Quick Set "Home AP Dual", my Wi-Fi upload speed will be 200mbps, if I use Quick Set "CAP", the upload speed will become 400mbps.

All my wireless setting is same, very strange issue.
Look for Local Forwarding
by mistry7
Mon Aug 12, 2019 11:58 pm
Forum: General
Topic: Missing PPP option [SOLVED]
Replies: 1
Views: 297

Re: Missing PPP option [SOLVED]

How Did you Upgrade?

Link at System —-> Package
Is ppp missing there?
by mistry7
Mon Aug 12, 2019 10:42 pm
Forum: Wireless Networking
Topic: SXTsq 5 ac short link performance issue
Replies: 1
Views: 301

Re: SXTsq 5 ac short link performance issue

In this polluted Spectrum you better Buyed the 60Ghz Wap, with this you get 1Gbit
by mistry7
Mon Aug 12, 2019 4:18 pm
Forum: Wireless Networking
Topic: Detecting if Weather Radar is active!
Replies: 3
Views: 429

Re: Detecting if Weather Radar is active!

This is Screenshot from a Mimosa C5C in PTP Setup
Spectral Scan is missing in all Mikrotik ac Hardware, if you yousing something older it is possible
by mistry7
Mon Aug 12, 2019 4:07 pm
Forum: Wireless Networking
Topic: Detecting if Weather Radar is active!
Replies: 3
Views: 429

Re: Detecting if Weather Radar is active!

Spectrum Mimosa.jpg
without Spectrum Scan function nearly impossible......
You see the small bar @5630 That is our TDWR here....
by mistry7
Thu Aug 08, 2019 11:44 pm
Forum: Wireless Networking
Topic: NV2 Synchronization feedback
Replies: 1
Views: 399

Re: NV2 Synchronization feedback

Does not work for us, Speed is worse Then without
by mistry7
Thu Aug 08, 2019 9:56 am
Forum: General
Topic: Problem With SXT Lite 5
Replies: 4
Views: 508

Re: Problem With SXT Lite 5

Do you try to connect Wireless of via cable?
Does your Switch have any log?
by mistry7
Wed Aug 07, 2019 9:13 am
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 118
Views: 19462

Re: 802.11ax [SOLVED]

[/quote] We don't do VOIP, it's cheaper to give clients a terminal with a simm of one of the cell operators. We have a deal with them. They bill us wholesale and we bill the clients. Problems are theirs and we still make a couple of bucks per month on these clients...! Clients don't care if this is ...
by mistry7
Mon Aug 05, 2019 10:04 am
Forum: The User Manager
Topic: user manager and pppoe server can't communicate
Replies: 2
Views: 413

Re: user manager and pppoe server can't communicate

Your Radius config?
by mistry7
Sun Aug 04, 2019 10:28 am
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154821

Re: RouterOS v7.0 beta1 - when?

Are we there yet? Yes we Are, the Home-Brew Drivers they do, Are 50-70% behind real Performance in PTP and PtmP, new Features, not Seen , real issue with every new chipset (arm Nv2 issue for more than 12 Month), 4011 Turms of 5ghz, don’t work with more than 80 mhz, mu-Mimo (we possible See This whe...
by mistry7
Fri Aug 02, 2019 3:04 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154821

Re: RouterOS v7.0 beta1 - when?

And here Comes 802.11ax embedded boards like Mikrotik Rb.....

https://compex.com.sg/shop/embedded-board/wpq872/
by mistry7
Fri Aug 02, 2019 12:27 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154821

Re: RouterOS v7.0 beta1 - when?

Are we there yet? Yes we Are, the Home-Brew Drivers they do, Are 50-70% behind real Performance in PTP and PtmP, new Features, not Seen , real issue with every new chipset (arm Nv2 issue for more than 12 Month), 4011 Turms of 5ghz, don’t work with more than 80 mhz, mu-Mimo (we possible See This whe...
by mistry7
Wed Jul 24, 2019 6:26 am
Forum: Wireless Networking
Topic: Wifi equipment for 70m distance behind windows
Replies: 14
Views: 1197

Re: Wifi equipment for 70m distance behind windows

There Are so small cables avaible that No Drilling is needed...

https://www.intos.de/produktuebersicht/ ... =5N9cjAIQM
by mistry7
Wed Jul 24, 2019 12:06 am
Forum: Wireless Networking
Topic: Wifi equipment for 70m distance behind windows
Replies: 14
Views: 1197

Re: Wifi equipment for 70m distance behind windows

No need for holes try something like This

https://rover.ebay.de/rover/0/0/99?loc= ... 3061020036

Use 60Ghz outside only !
by mistry7
Mon Jul 22, 2019 11:16 pm
Forum: General
Topic: v7 Linux Kernel version ?
Replies: 6
Views: 2182

Re: v7 Linux Kernel version ?

It is even possible that there will be v7 linux kernel for v7 routerOs
Yes, i think everything is possible abtuet The last 5 years...
by mistry7
Mon Jul 22, 2019 9:17 am
Forum: Wireless Networking
Topic: 6 x 60G AP Sectors Area Configuration Thread
Replies: 5
Views: 630

Re: 6 x 60G AP Sectors Area Configuration Thread

Yes we Did something like this But with:

https://mikrotik.com/product/wap_60gx3_ap

We Use 3 device to Cover 360deg with 3 channels in Use we had No issue
by mistry7
Tue Jul 09, 2019 8:41 am
Forum: RouterBOARD hardware
Topic: Bunch of fried hAP ac - trash?
Replies: 4
Views: 744

Re: Bunch of fried hAP ac - trash?

Die you try netinstal?
by mistry7
Thu Jun 27, 2019 9:37 am
Forum: Wireless Networking
Topic: Signal Strength
Replies: 3
Views: 729

Re: Signal Strength

it is wifi..... Signal Strength : -53/-56 is good signal strange for 50km and shows that you are running with maximum power where are you from? Signal Strength : -37/-36 ist higher and that's one point why you got better bandwidth the next think you need to check is ccq what is real? 1.5 Km distance...
by mistry7
Thu Jun 27, 2019 9:35 am
Forum: Wireless Networking
Topic: Signal Strength
Replies: 3
Views: 729

Re: Signal Strength

it is wifi..... Signal Strength : -53/-56 is good signal strange for 50km and shows that you are running with maximum power where are you from? Signal Strength : -37/-36 ist higher and that's one point why you got better bandwidth the next think you need to check is ccq what is real? 1.5 Km distance...
by mistry7
Mon Jun 24, 2019 9:26 pm
Forum: Wireless Networking
Topic: MU-MIMO?
Replies: 24
Views: 8040

Re: MU-MIMO?

Two years...
And nothing...
wait for Ros 7
lol
by mistry7
Sun Jun 23, 2019 10:05 pm
Forum: Wireless Networking
Topic: wifi 1km?
Replies: 1
Views: 371

Re: wifi 1km?

With no sight this is impossible
by mistry7
Mon Jun 17, 2019 9:16 am
Forum: Wireless Networking
Topic: Configuring a Wireless Wire Dish as a switch ?
Replies: 2
Views: 337

Re: Configuring a Wireless Wire Dish as a switch ?

, is it possible to configure both master and slave units of Wireless Wire Dish as switches ?

WAN ---- Main switch ----- Master dish ------ Slave Dish ---- Secondary switch

Best regards
What you need is a Bridge config, and the Dish set Is a P2P Bridge out of Box
by mistry7
Sun Jun 16, 2019 6:30 pm
Forum: Beginner Basics
Topic: Need help 2x SXTsq PTP bridge
Replies: 6
Views: 517

Re: Need help 2x SXTsq PTP bridge

First Upgrade to 6.44.3 and then Test
by mistry7
Thu Jun 13, 2019 10:34 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63744

Re: LHG 60G experience

For QinQ you need MTU of 1522, LHG has L2 MTU 1598, so QinQ is No Problem
by mistry7
Wed Jun 12, 2019 1:28 am
Forum: Beginner Basics
Topic: RBwAPG-60ad distance =0.0 ?
Replies: 10
Views: 687

Re: RBwAPG-60ad distance =0.0 ?

Ok i Missed that.
Do you Use the latest ROS?
is there a reflective surface ain the near?
by mistry7
Tue Jun 11, 2019 9:21 am
Forum: Beginner Basics
Topic: RBwAPG-60ad distance =0.0 ?
Replies: 10
Views: 687

Re: RBwAPG-60ad distance =0.0 ?

Newer Windows: The metallic vapor deposition on the inner pane is transparent to the high-energy short-wave solar radiation. If the sun's rays hit your furniture, walls, ceilings, etc., they absorb the energy from the sun's rays, store it in between, and then release it as heat radiation. The resul...
by mistry7
Mon Jun 10, 2019 12:35 pm
Forum: Beginner Basics
Topic: RBwAPG-60ad distance =0.0 ?
Replies: 10
Views: 687

Re: RBwAPG-60ad distance =0.0 ?

What Kind of Windows?
A newer One?

Use something like this to mount it outside!
https://www.bueromarkt-ag.de/saugheber_ ... oCXEvw_wcB
by mistry7
Mon Jun 10, 2019 11:35 am
Forum: Beginner Basics
Topic: RBwAPG-60ad distance =0.0 ?
Replies: 10
Views: 687

Re: RBwAPG-60ad distance =0.0 ?

how it is mounted? Reflections?
by mistry7
Sun Jun 09, 2019 3:58 am
Forum: Wireless Networking
Topic: Experience with PtP Wireless Wire Dish link
Replies: 3
Views: 629

Re: Experience with PtP Wireless Wire Dish link

Our links under 500m Did not disconnect since installing, this is more Then 12 Month
by mistry7
Sun Jun 09, 2019 3:54 am
Forum: General
Topic: Mikrotik Warrany where in USA?
Replies: 2
Views: 362

Re: Mikrotik Warrany where in USA?

Where die you Buy it? Speak with your Dealer
by mistry7
Sat Jun 08, 2019 3:06 pm
Forum: General
Topic: CANNOT PING MAIN OFFICE LAN DEVICES USING EOIP OVER L2TP WITH IPSEC
Replies: 8
Views: 629

Re: CANNOT PING MAIN OFFICE LAN DEVICES USING EOIP OVER L2TP WITH IPSEC

Yeah and I am a newbie seeking some help. Clearly, your english is worse than my config. Thanks anyway. ✌🏽
This is more about a smartphone and a non english auto correction
by mistry7
Sat Jun 08, 2019 8:13 am
Forum: General
Topic: CAPsMan Error
Replies: 4
Views: 400

Re: CAPsMan Error

please post your config
by mistry7
Sat Jun 08, 2019 5:25 am
Forum: Beginner Basics
Topic: Block IP adress trying to access RDP
Replies: 10
Views: 850

Re: Block IP adress trying to access RDP

Think about VPN and not limiting .......
From Outside direct avaible Services will be Hacked in some case

Look at winbox hack
Look to ubnt
Look were you want, direct exposed Services are an invitation
the only was to do Secure this, is yousing a VPN
by mistry7
Sat Jun 08, 2019 5:15 am
Forum: General
Topic: CANNOT PING MAIN OFFICE LAN DEVICES USING EOIP OVER L2TP WITH IPSEC
Replies: 8
Views: 629

Re: CANNOT PING MAIN OFFICE LAN DEVICES USING EOIP OVER L2TP WITH IPSEC

This Konfig is more Then Worse.... Why L2TP If you Are yousing EOIp Instead ? ( you can do IPSec with eoip directly) And for dyn. IPs there Are other ways, like DynDNS and scripts But EOIP over the Internet will end in MTU Problems Why you don’t yousing L2tp for Bridging? https://wiki.mikrotik.com/w...
by mistry7
Thu Jun 06, 2019 10:31 pm
Forum: Wireless Networking
Topic: "wAP ac kit"
Replies: 2
Views: 463

Re: "wAP ac kit"

Looks like a copy of cap ac with PCIe Slot

Hopefully with POE pass trought
by mistry7
Thu Jun 06, 2019 11:40 am
Forum: Wireless Networking
Topic: RBwAPG-60adkit - no wireless multiple vlan trunk
Replies: 3
Views: 437

Re: RBwAPG-60adkit - no wireless multiple vlan trunk

What so you want to do?

Transparent Bridge?
If yes remove all VLAN Interfaces on WAPs and Disable VLAN Filtering on Bridge, you don’t need that.

If you not want Transparent Bridge we need more Info what you want to Archive
by mistry7
Tue Jun 04, 2019 1:10 am
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154821

Re: RouterOS v7.0 beta1 - when?

I just want to let everyone know, that v7 is progressing pretty good this year, and most core functionality is usable. Some more difficult parts need to be done and we can release a public beta.
Can you give some information on what kernel it will be using 4.x or 5.x?
4.xx
by mistry7
Mon Jun 03, 2019 11:07 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154821

Re: RouterOS v7.0 beta1 - when?

We droped Mikrotik out of our Core, IPV6 is needed more Then Ever, we will obtain last avaible IPv4 address in the Next 3-4 Month, and Then we need to start CGN NAT
by mistry7
Mon Jun 03, 2019 6:44 am
Forum: Wireless Networking
Topic: Optimize SXT Lite 5 PtP Link , bad CCQ
Replies: 4
Views: 779

Re: Optimize SXT Lite 5 PtP Link , bad CCQ

Hi, it´s for about 500 meters and with 100 mbps aggregate it´s sufficient...

Finally.... lot of tests.... lot of configs, solved with a pair of nanobeam ac gen2

Thanks !!
For 500m you Better Choose a 60Ghz Product
by mistry7
Sun Jun 02, 2019 11:01 am
Forum: Wireless Networking
Topic: LHG 60GHz Wireless Wire [SOLVED]
Replies: 3
Views: 492

Re: LHG 60GHz Wireless Wire [SOLVED]

You need to Remove the w60g-Station Interface, After a connect it is created new
by mistry7
Sat May 25, 2019 10:25 am
Forum: Wireless Networking
Topic: W60G max 8 stations?
Replies: 1
Views: 300

Re: W60G max 8 stations?

If i remember right Normis told us it is Hardware Limit
by mistry7
Sat May 25, 2019 6:29 am
Forum: Wireless Networking
Topic: Metal G-52SHPacn Can not use 2.4Ghz and 5Ghz at same time?
Replies: 1
Views: 255

Re: Metal G-52SHPacn Can not use 2.4Ghz and 5Ghz at same time?

No there is only One Interface so it is impossible to use both Bands at the same time
by mistry7
Fri May 24, 2019 9:31 pm
Forum: Beginner Basics
Topic: Advice on backing a 60GHz link with a private DSL line
Replies: 2
Views: 320

Re: Advice on backing a 60GHz link with a private DSL line

With 60m clear LOS you van espect 1GBit with Wireless Wire you don’t need the dish
by mistry7
Tue May 21, 2019 3:39 pm
Forum: Wireless Networking
Topic: Co-locate LHG 60ad on same mount
Replies: 11
Views: 843

Re: Co-locate LHG 60ad on same mount

Which one works perfect the higher mounted one?
by mistry7
Sun May 19, 2019 10:50 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60286

Re: ARM devices and NV2 protocol

Now time for fix 40 MHz channel in this moment max speed only 150 Mbit for TCP :( + 1 Tried to use 40MHz instead of 20MHz using nv2 many years ago on a link that was up for nearly 7 years. It was rock solid but it did not become faster than 20MHz, in fact no differences at all. Flat out speed was a...
by mistry7
Sat May 11, 2019 11:39 pm
Forum: RouterBOARD hardware
Topic: LHG Lite60 [SOLVED]
Replies: 4
Views: 632

Re: LHG Lite60 [SOLVED]

You Are in Europe?
It Did not get CE, so it is not possible to sell it in EU

viewtopic.php?t=143935
by mistry7
Sat May 11, 2019 3:56 pm
Forum: Announcements
Topic: v6.45beta [testing] is released!
Replies: 305
Views: 71199

Re: v6.45beta [testing] is released!

which is even more important for you?
maybe another fix LCD?
no, KidControl.......
by mistry7
Tue May 07, 2019 8:22 am
Forum: RouterBOARD hardware
Topic: Need 3 WiFi AC Card
Replies: 3
Views: 586

Re: Need 3 WiFi AC Card

Why Using cards in One Board and not a all Outdoor Solution like SXt / QRT / etc?
by mistry7
Sat May 04, 2019 3:45 am
Forum: General
Topic: SXT 2 Discontinued?
Replies: 3
Views: 345

Re: SXT 2 Discontinued?

On Stock in Germany
by mistry7
Thu May 02, 2019 11:28 am
Forum: Wireless Networking
Topic: WiFi4EU
Replies: 8
Views: 1784

Re: WiFi4EU

Any news from Mikrotik?

Wifi4EU completed (in April 2019) the second call and other thousands of municipality will receive their voucher..

This is a very very big opportunity for Mikrotik
They will need years to get close to competitors
by mistry7
Wed May 01, 2019 5:03 pm
Forum: General
Topic: be careful! 6.44.x should not marked as stable!
Replies: 6
Views: 1057

Re: be careful! 6.44.x should not marked as stable!

Yesterday we had a Sxt Link that was down for unknown reason, reboot solved it, just loose Connection and Did not Come back

SXt HG ac
802.11
P2P
by mistry7
Thu Apr 25, 2019 3:22 am
Forum: Wireless Networking
Topic: wAP 60Gx3 problem
Replies: 7
Views: 868

Re: wAP 60Gx3 problem

That is Bad news, we want to Test this Sector in the Next Week in real Setup
by mistry7
Mon Apr 22, 2019 7:11 am
Forum: General
Topic: victim of attack PPPOE
Replies: 10
Views: 886

Re: victim of attack PPPOE

Whats your Problem, of this User does not have valid usernane and Password, what should je do? This Messages Are Not an real Attack, Of the MaC Adresse change Every Time, this would I Call an attack If you do the PPPOE config on your SXT eg, this is an Mikrotik Device. Look at Mac, Look at AP Regist...
by mistry7
Tue Apr 16, 2019 2:11 pm
Forum: Wireless Networking
Topic: NV2 PtMP - good signal and ccq but low throughput
Replies: 6
Views: 713

Re: NV2 PtMP - good signal and ccq but low throughput

Well, i expected more. On 135Mpbs rate it should be 60Mbps stable with those signal levels and ccq.
135 Mpbs is max Brutto, its WiFi, with an old 54Mbit 802.11a you got about 20Mbit
And your CCQ shows that your spectrum is not clear....
by mistry7
Tue Apr 16, 2019 11:14 am
Forum: Wireless Networking
Topic: NV2 PtMP - good signal and ccq but low throughput
Replies: 6
Views: 713

Re: NV2 PtMP - good signal and ccq but low throughput

Your CCQ rates are not good, and what do you think you get with 1 Chain?
by mistry7
Mon Apr 15, 2019 1:00 pm
Forum: Wireless Networking
Topic: 3.6 Km Ptp Link -- bad RX ccq and BW [SOLVED]
Replies: 7
Views: 734

Re: 3.6 Km Ptp Link -- bad RX ccq and BW [SOLVED]

What Devices you are using?
I Think Antennas are too small for this distance
by mistry7
Wed Apr 10, 2019 10:26 am
Forum: General
Topic: LNS Server latency issues
Replies: 5
Views: 383

Re: LNS Server latency issues

Please Show :

/tool profile cpu=all
by mistry7
Wed Apr 10, 2019 9:38 am
Forum: General
Topic: LNS Server latency issues
Replies: 5
Views: 383

Re: LNS Server latency issues

how much users?
CPU using per Core?
is that a direct connection between LAC and your LNS or do you get this L2TP Tunnel over the Internet?
by mistry7
Fri Apr 05, 2019 11:59 am
Forum: General
Topic: v6 RC and v7 BETA
Replies: 126
Views: 24459

Re: v6 RC and v7 BETA

When I can use ROS v7 ?
On Christmas but you don't know the year......
by mistry7
Sat Mar 30, 2019 11:23 am
Forum: General
Topic: UKNOF 43 CVE
Replies: 223
Views: 40080

Re: UKNOF 43 CVE

Mistry7, Good call moving off of mikrotik for security reasons. I couldn't agree more. I did too for some things. Today is a security day for us Cisco fans too. There are 17 flaws to fix. Have you seen this. https://www.networkworld.com/article/3384742/cisco-warns-of-two-security-patches-that-dont-...
by mistry7
Sat Mar 30, 2019 10:37 am
Forum: General
Topic: UKNOF 43 CVE
Replies: 223
Views: 40080

Re: UKNOF 43 CVE

Mikrotik what is need to happen that you are wake up and get ROS 7 with newer Kernel ready?

ROS Kernel is from 2012!

Good for us, we removed all Mikrotik at Core Routers in the last 3 Month, because of bad BGP Speed, and Missing IPv6 PPPoE Features
No i Think that was a very good decision!
by mistry7
Fri Mar 29, 2019 6:56 am
Forum: Wireless Networking
Topic: 34km link low CCQ
Replies: 13
Views: 1247

Re: 34km link low CCQ

We have no good Experience with Mikrotik at links with more then 10km
We build them with UBNT Airfiber, they Performe much better over such distances, I have a similar link here
32km
34 dBi Dishes
36 dBm allowed
Total BW 260MBit with 40Mhz Channel
Splitt into 200 down / 60 Up
by mistry7
Thu Mar 28, 2019 10:47 pm
Forum: Wireless Networking
Topic: New standard 802.11ax
Replies: 25
Views: 6681

Re: New standard 802.11ax

is there even any AC pci cards we could test on a routerboard? There is hardware: https://wikidevi.com/wiki/List_of_802.11ax_Hardware But you need to convince MT to build a driver. Nobody builds their own drivers. The majority of the driver and software stack for the chipset is from qualcomm and ev...
by mistry7
Thu Mar 28, 2019 10:43 pm
Forum: Wireless Networking
Topic: 34km link low CCQ
Replies: 13
Views: 1247

Re: 34km link low CCQ

Is this a shot over Water?
by mistry7
Wed Mar 27, 2019 8:33 am
Forum: Wireless Networking
Topic: RB4011iGS+5HacQ2HnD-IN->AC Wifi issue
Replies: 2
Views: 418

Re: RB4011iGS+5HacQ2HnD-IN->AC Wifi issue

Your USB standart?
USB 2 maxes out at 480MBit theoretically, so 300MBit over USB2 would be good speed
by mistry7
Mon Mar 25, 2019 8:21 am
Forum: Wireless Networking
Topic: More powerful 24v power supply for Powerbox?
Replies: 2
Views: 569

Re: More powerful 24v power supply for Powerbox?

Use better cables!
by mistry7
Sun Mar 24, 2019 7:13 pm
Forum: General
Topic: OpenWRT on Mikrotik
Replies: 2
Views: 406

Re: OpenWRT on Mikrotik

The RouterOS IPv6 support is not enough for me, so I need Linux kernel 4.x functions. The OpenWRT 18.06.2 use Linux kernel version 4.9 or 4.14. I found a list, which devices are supported: https://openwrt.org/toh/start?dataflt%5BBrand*%7E%5D=MikroTik How do I install OpenWRT? How do I reinstall the...
by mistry7
Sat Mar 23, 2019 11:25 pm
Forum: RouterBOARD hardware
Topic: LHG 60G rev 2?
Replies: 11
Views: 1342

Re: LHG 60G rev 2?

The PCB print says LHG 60G x8 ... and there's already a topic about it . This topic is NOT about this. Your link is about wAP 60Gx3 (180 degree sector) and there is no 5Ghz radio on PCP. But LHG60G r2 have ch0 on pcb and shielding plate. In winbox not. Maybe in future. More info from @Mikrotik? Wha...
by mistry7
Sat Mar 23, 2019 11:19 pm
Forum: RouterBOARD hardware
Topic: Mikrotik QRT VS DynaDish
Replies: 9
Views: 1317

Re: Mikrotik QRT VS DynaDish

Hi, the Antenna Pattern are the difference, and the device shielding to the back. QRT works better in noisy environment. But both Antennas has big side lobes, and asymetric pattern. we are waiting for this one, because of small side lobes an high antenna gain in hole spectrum: https://www.rfelement...
by mistry7
Sat Mar 23, 2019 12:51 pm
Forum: RouterBOARD hardware
Topic: LHG 60G rev 2?
Replies: 11
Views: 1342

Re: LHG 60G rev 2?

@honzam

where did you get these Pictures?
by mistry7
Fri Mar 22, 2019 8:12 pm
Forum: General
Topic: LHG5 AC in N mode at 10 MHz
Replies: 5
Views: 373

Re: LHG5 AC in N mode at 10 MHz

I don´t think so
by mistry7
Fri Mar 22, 2019 6:44 am
Forum: RouterBOARD hardware
Topic: wAP 60Gx3 AP - anyone already tested it?
Replies: 7
Views: 901

Re: wAP 60Gx3 AP - anyone already tested it?

I'd love to try 60ghz out in some of our busier areas mostly because 5ghz is super noisy. Wap has 3 Antenna Elements but uses only one Channel, the maximum is 8 Clients not 24. All distances over 150m with WAP to WAP. Or WAP to sXT needs 5 GHz Backup, with LHG with more then 500m, but they need it ...
by mistry7
Thu Mar 21, 2019 9:53 pm
Forum: RouterBOARD hardware
Topic: wAP 60Gx3 AP - anyone already tested it?
Replies: 7
Views: 901

Re: wAP 60Gx3 AP - anyone already tested it?

Also "CH0 5G" - 5GHz backup, unpopulated again
they are digging their own grave!
by mistry7
Thu Mar 21, 2019 4:57 am
Forum: Wireless Networking
Topic: Equipment Recommendation for Wireless Backbone
Replies: 4
Views: 396

Re: Equipment Recommendation for Wireless Backbone

How much CPEs?
How much Clients per CPE at the local wiFi for Client Apps?
System Distances?
by mistry7
Mon Mar 18, 2019 11:09 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63744

Re: LHG 60G experience

Hej guys, I have 750m PTP link to do and three small 230V wires by the road between these two points. Is it ok to use LHG60 kit ? I don't need 1Gbps throughput, 300Mbps will be ok. What about rain and snow, I want to sleep well :-) You need to point very well, and the money for solid mount is a goo...
by mistry7
Mon Mar 18, 2019 10:58 pm
Forum: Wireless Networking
Topic: 50 km LINk
Replies: 6
Views: 531

Re: 50 km LINk

Yes, longest link is 32km, 36 dBm EIRP, 34 dBIDishes, 250MBit real TCP
That's 36 dBm Tx power or 2 dBm Tx power?
2 db tx power
by mistry7
Mon Mar 18, 2019 7:07 pm
Forum: Wireless Networking
Topic: 50 km LINk
Replies: 6
Views: 531

Re: 50 km LINk

Yes, longest link is 32km, 36 dBm EIRP, 34 dBIDishes, 250MBit real TCP
by mistry7
Mon Mar 18, 2019 12:17 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63744

Re: LHG 60G experience

Mikrotik is wasting 18 months of advantage on 60 GHZ, is it possible to know if there is any hardware with 5 ghz backup in the close future? Why? UBNT will deliver such product, and there would be an AP as well, so why ask them here thinks that they know from the beginning of there 60 GHz Productli...
by mistry7
Mon Mar 18, 2019 9:34 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63744

Re: LHG 60G experience

I am reporting some weird findings. The device is connected on an HP A5500 48port PoE+ switch worth 7,000+ euros. There are 3 other LHG60 on the same switch all working properly/normally. There are 35 VoIP phones on the same switch all working properly. Even when switching off the PoE power from th...
by mistry7
Mon Mar 18, 2019 9:30 am
Forum: Wireless Networking
Topic: 50 km LINk
Replies: 6
Views: 531

Re: 50 km LINk

Possible, speed depends on your allowed EIRP.
in the EU with 30/36dBm max it would be hard to get this speed with 802.11 Hardware.

If your Budget allowes it, I would go with UBNt AF5x HD
by mistry7
Sun Mar 17, 2019 7:12 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63744

Re: LHG 60G experience

Bad news for mikrotik
60ghz.png
please original link ???
This is early access shop, you need to be registered and allowed to see this
by mistry7
Sun Mar 17, 2019 6:54 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63744

Re: LHG 60G experience

Bad news for mikrotik
60ghz.png
Yes and they do it right from the beginning, integrated 5 GHz Backup....
And Mikrotik engeneers are sleeping....
by mistry7
Sat Mar 16, 2019 6:26 am
Forum: RouterBOARD hardware
Topic: MikroTik RouterBOARD RBM11G??????
Replies: 2
Views: 400

Re: MikroTik RouterBOARD RBM11G??????

Can a 4x4 card be used on this RouterBOARD RBM11g?
THANK YOU
At this Moment the only Chipset that is Support 4x4 is the One in the 4011, and it looks like the Driver only works on ARM based boards, so not for the M11G
by mistry7
Wed Mar 13, 2019 1:44 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 11959

Re: MUM Europe 2019: new hardware

Well, these all new PowerLine devices are ok, but what about MT outdoor wireless? Has MT mentioned any plans to introduce some new AP? Or we're stuck with good ol' RB912/92x?
nothing new.......
Thats good news after the ARM NV2 desaster.......
by mistry7
Sun Mar 10, 2019 9:39 pm
Forum: General
Topic: EOIP TCP problem
Replies: 6
Views: 541

Re: EOIP TCP problem

Look into L2TP BCP Bridging, it works better
https://wiki.mikrotik.com/wiki/Manual:B ... _bridging)
by mistry7
Sun Mar 10, 2019 7:56 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 11959

Re: MUM Europe 2019: new hardware

At this point I'd take a 1U server with an Intel Xeon with a bunch of SFP+ cards jammed in the front and a Mikrotik logo stuck on.
Impossible with 3.xx Kernel, and missing support for actually Hardware
by mistry7
Sun Mar 10, 2019 7:36 pm
Forum: Wireless Networking
Topic: HD video over ptp 60Ghz wirless wire
Replies: 3
Views: 324

Re: HD video over ptp 60Ghz wirless wire

Are you 100% sure that your converter outputs standard Ethernet frames?
In most CaSes this is not IP Traffic, it is only an range extender, No IP Converter
by mistry7
Sat Mar 09, 2019 7:19 am
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 11959

Re: MUM Europe 2019: new hardware

Great hardware.
If the software would be on the same niveau as the hardware is, I'd start buying mikrotik again.
Good point!
by mistry7
Thu Mar 07, 2019 10:38 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 11959

Re: MUM Europe 2019: new hardware

Easy to answer sarcasm on 1- Are 1-MikroTik 802.11ax Plans in 2019? We don’t tell anyone 2- When will software support be provided to take full advantage of the features of existing 802.11ac wave2 products? Would be fixed with ROs 7 3- Is there a prospective study of MikroTik for the current Flagshi...
by mistry7
Thu Mar 07, 2019 6:19 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 11959

Re: MUM Europe 2019: new hardware

Was this the big European MUM? Or is that one in April?
There seems to have been no live stream.
Yes that is the big MUM (tomorrow too)
and yes there is a live stream...
by mistry7
Thu Mar 07, 2019 12:38 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 11959

Re: MUM Europe 2019: new hardware

No new 60 ghz device with 5 ghz backup? First things first More and more, there is no wireless future in Mikrotik Product Roadmap........ Yes. No 802.11ax, not mentioned Terragraph (https://blog.mikrotik.com/announcements/mikrotik-accelerates-the-adoption-of-60-ghz-technologies-with-terragraph.html...
by mistry7
Thu Mar 07, 2019 12:08 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 11959

Re: MUM Europe 2019: new hardware

No new 60 ghz device with 5 ghz backup?
First things first

More and more, there is no wireless future in Mikrotik Product Roadmap........
by mistry7
Thu Mar 07, 2019 11:46 am
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 11959

Re: MUM Europe 2019: new hardware

Real Mikrotik,

Ethernet over 1,5km?
The big cost of fiber optic access is not the fiber and fiber hardware. Civil engineering is the most expensive, so why copper laying on the ground?
by mistry7
Wed Mar 06, 2019 10:59 am
Forum: Announcements
Topic: v6.45beta [testing] is released!
Replies: 305
Views: 71199

Re: v6.45beta [testing] is released!

With 802.11ax the chipsetvendors have to put a lot of stuff into the chipset which helps WISPs. There is Scheduling, there is OFDMA. MT do not have to implement it. It is just there and it is vendor neutral. This is the way to go as fast as possible. You try to ride a dead horse ... And this featur...
by mistry7
Wed Mar 06, 2019 9:25 am
Forum: Announcements
Topic: v6.45beta [testing] is released!
Replies: 305
Views: 71199

Re: v6.45beta [testing] is released!

Don´t cry for next new Hardware, we had to wait over 12 Month for new Arm Chipsets to get running in most cases, most here had buyed 802.11n Hardware until there is no working 802.11ac available from Mikrotik, Wave2 is completely unsupported (most available devices from MT has Wave 2 Chipset). So do...
by mistry7
Tue Mar 05, 2019 5:43 pm
Forum: Announcements
Topic: v6.45beta [testing] is released!
Replies: 305
Views: 71199

Re: v6.45beta [testing] is released!

Will a new wireless driver package for 802.11ac be released in 6.45 or is it planned for a later RouterOS version?
Do you have any specific information about something to happen?
Normis told that in an another thread, but he did not say it will happen this year
by mistry7
Tue Mar 05, 2019 4:47 pm
Forum: Wireless Networking
Topic: Back to back LHGG-60ad Ptp link (relay) [SOLVED]
Replies: 10
Views: 778

Re: Back to back LHGG-60ad Ptp link (relay) [SOLVED]

Devices Are able to use 4 not overlapping channels, so what is your problem?
by mistry7
Sat Mar 02, 2019 12:00 pm
Forum: Wireless Networking
Topic: 60Ghz 2.4km - possible?
Replies: 41
Views: 6067

Re: 60Ghz 2.4km - possible?

@2mailwelkom How your 3255m link is stable during rain events? it will drop every light rain, that is known fact @60Ghz and Distances longer than 1500m...... My links with 800-1000m are almost stable and only drops with very very hard rain, and then only for short time. Links under 700m are really ...
by mistry7
Thu Feb 28, 2019 10:22 am
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154821

Re: RouterOS v7.0 beta1 - when?



Nothing has changed from that time. Please suggest what answer you wanted to hear.
We are not able to do Business decisions with a maybe or "in near future"
by mistry7
Thu Feb 28, 2019 2:50 am
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154821

Re: RouterOS v7.0 beta1 - when?

Sry Mikrotik - your public relations behaviour is a total desaster when it comes to this topic. This is a user forum. So I don‘t expect u guys to do the right thing nor do I expect that u even know the truth. We all know that here and there especially software projects might end in a desaster. In c...
by mistry7
Wed Feb 27, 2019 12:00 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154821

Re: RouterOS v7.0 beta1 - when?

Sorry to break the news to some of you, but the official stance has always been - use v6. We are working on v7, and it will be released when it will be ready. Correct, that indeed is the thing you keep telling us. The problem we have is that for many years now you refer to this V7 and there even is...
by mistry7
Wed Feb 27, 2019 11:50 am
Forum: Wireless Networking
Topic: What happened to Mikrotik Wireless?
Replies: 3
Views: 512

Re: What happened to Mikrotik Wireless?

You should make support tickets or separate topics for each of these issues. In general, there are no known issues with wireless right now. You can get really good speeds with MacBook and cAP ac or RB4011 wifi model. What do you want to get? -supout from CAP AC and Caps Controller? when it happened?
by mistry7
Wed Feb 27, 2019 11:40 am
Forum: Wireless Networking
Topic: What happened to Mikrotik Wireless?
Replies: 3
Views: 512

What happened to Mikrotik Wireless?

Dear Mikrotik, what happened to the Wireless Speed we had in 2010-2014? Your own 802.11n hardware is outperforming your 802.11ac in most cases. Today we Test Ligowave NFT 3ac Lite, they easily outperform my CAP AC / WAP AC and 4011 in all disciplines - 2G Coverage and throughput is better - 5G Cover...
by mistry7
Fri Feb 22, 2019 7:27 am
Forum: Wireless Networking
Topic: Selection guide for PtP links Ranges?
Replies: 10
Views: 573

Re: Selection guide for PtP links Ranges?

You really didn't answer a single question or provide any information I didn't already know. Your post was nothing more than spam. I will move onto another vendor for wifi links over distance. You need to be more specific to get an specific answer! - needed speed of the link - distance - line of si...
by mistry7
Thu Feb 21, 2019 3:28 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60286

Re: ARM devices and NV2 protocol

I cant see rc3 firmware!!!
Where can download?
No one is talking about RC2 or RC3, we talk about Wireless Protocol NV2
by mistry7
Tue Feb 19, 2019 9:16 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60286

Re: ARM devices and NV2 protocol

Hello anyone has tried the new Version 6.44rc1 ? Wait for RC2: In the near future a new testing version will released (6.44rc2) that includes updates regarding nv2 issues with various software architectures. The next rc will not have any new features next rc fixes only issues with current features
by mistry7
Sat Feb 16, 2019 9:29 pm
Forum: Announcements
Topic: v6.44rc [testing] is released!
Replies: 67
Views: 12417

Re: v6.44rc [testing] is released!

*) wireless - improved system stability for all ARM devices with wireless; *) wireless - improved system stability for all MIPSBE devices with 802.11ac wireless; I can't find the posting anymore, but (Normis?) mentioned that there will be a new wireless driver package, but he didn't mention the tim...
by mistry7
Fri Feb 15, 2019 11:53 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63744

Re: LHG 60G experience


should know the correct TX-sector (not the center). Mikrotik, please finally post the LHG60 emission diagrams, please!
+1
by mistry7
Wed Feb 13, 2019 10:10 am
Forum: Beginner Basics
Topic: 100 mbps limit in p2p
Replies: 12
Views: 1017

Re: 100 mbps limit in p2p

And your device is?
by mistry7
Mon Feb 11, 2019 12:36 pm
Forum: RouterBOARD hardware
Topic: PowerBox powering options
Replies: 10
Views: 872

Re: PowerBox powering options

Another idea: put a mUPS on the tower before powerbox. According to brochure it boosts PoE out to 24V if input is lower than that ... and you don't have to install batteries if power outages are not a concern. Price tag is not outrageous either. Mups drops Poe dto. 12v in battery mode, with this ba...
by mistry7
Mon Feb 11, 2019 8:29 am
Forum: RouterBOARD hardware
Topic: PowerBox powering options
Replies: 10
Views: 872

Re: PowerBox powering options

Try these:

https://mikrotik.com/product/rbgpoe_con_hp

Or a power supply with 28/30v
by mistry7
Mon Feb 11, 2019 8:22 am
Forum: General
Topic: Ether bonding strange solution
Replies: 15
Views: 1852

Re: Ether bonding strange solution

I would go with this solution:

https://mikrotik.com/product/s_rj10
by mistry7
Mon Feb 11, 2019 8:18 am
Forum: General
Topic: DHCP Client brige l2tp tunnel [SOLVED]
Replies: 12
Views: 1379

Re: DHCP Client brige l2tp tunnel [SOLVED]

https://wiki.mikrotik.com/wiki/Manual:B ... _bridging)

Put the WiFi Interface in the Bridge and you got what you want
by mistry7
Fri Feb 08, 2019 4:01 pm
Forum: Wireless Networking
Topic: Wireless Wire - expected throughput?
Replies: 8
Views: 956

Re: Wireless Wire - expected throughput?

Thanks Anton, so I guess Wireless Wire will be the logical upgrade to my wireless bridge this spring :-) Got one more questions regarding wall mounting ... which mounting solution would I pick for direct wall mounting to be able to adjust horizontally and vertically?: https://mikrotik.com/product/Q...
by mistry7
Fri Feb 08, 2019 9:11 am
Forum: General
Topic: 802.11ac Wave2 Support?
Replies: 33
Views: 7450

Re: 802.11ac Wave2 Support?

- they incompatible to some Intel and Apple devices Not true, new betas fix the issue with Apple and the issue is with Apple new driver, not RouterOS driver. I have done picture with HP Laptop and 4011 still 54MBit, IPhone connects with full speed, not solved in actual Beta! have you checked the ch...
by mistry7
Fri Feb 08, 2019 8:45 am
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 118
Views: 19462

Re: 802.11ax [SOLVED]

I only use ARMs as clients and I don't see any problem. I have throughput problem even with mibsbe in some cases, especially for client upload, or with NetMetal + mANT I only get 50Mbps throughput when with other vendors I get 200Mbps, but I think it's a mANT problem. Just setup an Omnitik ac, conn...
by mistry7
Thu Feb 07, 2019 11:58 pm
Forum: Scripting
Topic: new product MUPSBOX
Replies: 1
Views: 662

Re: new product MUPSBOX

PDF in Russian are useless for most people here
by mistry7
Thu Feb 07, 2019 10:16 pm
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 118
Views: 19462

Re: 802.11ax [SOLVED]

I'd prefer to see ax based protocol than Wave 2 ac
You want to get next Beta Tester, buy arm that’s Beta enough
by mistry7
Thu Feb 07, 2019 9:18 pm
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 118
Views: 19462

Re: 802.11ax [SOLVED]

Come on MikroTik support, at least tell us if you're planning something or not.
Normis wrote on other Topic that they develop new driver with wave 2 support, but we don’t no when it is available
by mistry7
Thu Feb 07, 2019 8:13 pm
Forum: General
Topic: 802.11ac Wave2 Support?
Replies: 33
Views: 7450

Re: 802.11ac Wave2 Support?

- they incompatible to some Intel and Apple devices
Not true, new betas fix the issue with Apple and the issue is with Apple new driver, not RouterOS driver.
I have done picture with HP Laptop and 4011 still 54MBit, IPhone connects with full speed, not solved in actual Beta!
by mistry7
Thu Feb 07, 2019 8:06 am
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 118
Views: 19462

Re: 802.11ax [SOLVED]

We had the same issue in amateur packet radio and it was solved in the nineties. The solution was called DAMA and I think it is much like NV2 and AirMax, maybe less a few of the special optimizations. It is unbelievable that 25 years later there still is no 802.11xx standard that covers this and ca...
by mistry7
Thu Feb 07, 2019 7:47 am
Forum: General
Topic: 802.11ac Wave2 Support?
Replies: 33
Views: 7450

Re: 802.11ac Wave2 Support?

I'm aware that there are products now available using Wave 2 chipsets; hAP AC2, cAP AC, RB4011. However, does anyone know if the MU-MIMO functions or beamforming are currently supported and functioning in routerOS? And what I'm even more interested in is in the devices that are only 2x2 MIMO, is th...
by mistry7
Thu Feb 07, 2019 7:41 am
Forum: RouterBOARD hardware
Topic: Why people pair UBNT APs with MikroTik routers?
Replies: 55
Views: 29884

Re: Why people pair UBNT APs with MikroTik routers?

Indoor: UniFi performs better than Capsman UniFi Devices had better Range than WAPac and CAPac Outdoor: Mikrotik with ARM Based Chipset is completely unusable, unstable Connections, ping lags, disconnects, TDMA not working with ARM, no Spectral Scan AirMax and other like Mimosa are miles away With S...
by mistry7
Wed Feb 06, 2019 1:05 pm
Forum: General
Topic: RB911G-5HPacD not showing Tx Power in winbox [SOLVED]
Replies: 13
Views: 3536

Re: RB911G-5HPacD not showing Tx Power in winbox [SOLVED]

Somehow, this doesn't feel "solved"... :( I'm trying to use the MikroTik link calculator on a pair of existing QRT 5 ac units, to make sure the results agree with current reality before doing the calculations for a planned upgrade. The configurator says the radio power is 27 (and won't let me chang...
by mistry7
Tue Feb 05, 2019 9:36 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60286

Re: ARM devices and NV2 protocol

It is a disgrace that in recent years Mikrotik on wireless cough, now is not done a spectral scan for AC !!!! Shame Still showing devices with ARM very poor transmission parameters with NV2, why long ago does not work on NV3 ???? Instead, new and new features are being made, but old things are coug...
by mistry7
Tue Feb 05, 2019 4:47 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60286

Re: ARM devices and NV2 protocol

From support: Hello, Unfortunately, our development team has been unsuccessful to fix the issue with ARM ac chips combined with nv2 yet. It is still being worked on, but perhaps a new TDMA protocol will be developed to support our new chip-sets, if the issue will not be resolved. Apologies for the ...
by mistry7
Mon Feb 04, 2019 10:16 pm
Forum: Wireless Networking
Topic: Wireless FAQ
Replies: 68
Views: 57455

Re: Wireless FAQ

Hi,
Please can someone tell me what is real TCP bandwidth with DynaDish 5 at around 2,5-3km ?
Depends on link conditions
- spectrum usage
- eirp
- LOS ( Line of Sight)

Please tell Is your Minimum
by mistry7
Sun Feb 03, 2019 11:22 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63744

Re: LHG 60G experience

Hi All I have a question there is an hardware power tx difference from WAP60G and LHG60G? SXTsq60 - antenna gain 10-13,5dBi,(depending on channel, lowest gain is on 62GHz), tx power max 363mW / 25,6dBm WAP60G - antenna gain 10-13,5dBi (depending on channel, lowest gain is on 62GHz), tx power max 14...
by mistry7
Sat Feb 02, 2019 9:38 am
Forum: Wireless Networking
Topic: LHG5 True Maximum Distance Wireless Range
Replies: 2
Views: 344

Re: LHG5 True Maximum Distance Wireless Range

Hi,

how much EIRP is possible in your Location?
Is the Spectrum free?
How much Bandwidth you want to archive?

mistry7
by mistry7
Fri Feb 01, 2019 10:25 pm
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 118
Views: 19462

Re: 802.11ax [SOLVED]

ARM works very well. The only issue I know of, is lack of full compatibility with legacy Nv2 protocol. Any other problems? Test 2x ARM Bridge. Not stable & slower than MIPSBE. The same problem. NV2 is slower and have other issues. Nstreme is also slow. Best is 802.11, but this is not suitable for p...
by mistry7
Fri Feb 01, 2019 6:30 pm
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 118
Views: 19462

Re: 802.11ax [SOLVED]

ARM works very well. The only issue I know of, is lack of full compatibility with legacy Nv2 protocol.
Any other problems?
Test 2x ARM Bridge. Not stable & slower than MIPSBE.
For us the same, ping lags on arm Based CPE, VoIP not possible
by mistry7
Thu Jan 31, 2019 10:45 pm
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 118
Views: 19462

Re: 802.11ax [SOLVED]

Yes sure, you can become the next unpaid Beta Tester

ARM Hardware is now avaible for 13 Month, and does not work as aspected....
by mistry7
Thu Jan 31, 2019 5:13 pm
Forum: Announcements
Topic: February Newsletter #87
Replies: 65
Views: 14473

Re: January Newsletter #87

chipset limit is 8
Whats about smaller Channels?
by mistry7
Thu Jan 31, 2019 4:48 pm
Forum: Announcements
Topic: February Newsletter #87
Replies: 65
Views: 14473

Re: January Newsletter #87

- InterCell - LTE Base Stations, preorders available Can somebody update me on this... I understood LTE is cell operator's stuff. And the LTE devices Mikrotik sells are to pickup that signal and enhance it.. But you need to connect to cell op's network with cell op's simm card. Now MT has 'base sta...
by mistry7
Thu Jan 31, 2019 1:57 pm
Forum: Announcements
Topic: February Newsletter #87
Replies: 65
Views: 14473

Re: January Newsletter #87

wrong highlight, though. I would highlight the previous sentence, where it says that there are more antenna elements, so it's basically a sector design. not more interfaces.
OK, 4 port switch with POE?
by mistry7
Thu Jan 31, 2019 1:09 pm
Forum: Announcements
Topic: February Newsletter #87
Replies: 65
Views: 14473

Re: January Newsletter #87

wAP 60Gx3

Does it have 3 interface that means 3x2 Ghz Channels?
by mistry7
Thu Jan 31, 2019 10:14 am
Forum: Wireless Networking
Topic: WAP60G-AP
Replies: 13
Views: 1400

Re: WAP60G-AP

Export your config and Show us
by mistry7
Thu Jan 31, 2019 8:35 am
Forum: Wireless Networking
Topic: WAP60G-AP
Replies: 13
Views: 1400

Re: WAP60G-AP

Reset AP To Factory an begin from scratch
by mistry7
Fri Jan 25, 2019 10:27 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 289
Views: 40374

Re: wAP 60G experience

I have over 20 links, works fine, if you have port flapping this is in 99% bad cable / bad POE injector
by mistry7
Fri Jan 25, 2019 8:01 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63744

Re: LHG 60G experience

When installing the LHG60 dishes I used Ubiquiti TouchCable terminated with Ubiquiti ToughConnectors and using the Ubiquiti surge arrestors. As per instructions this requires a short cable to connect the LHG60 to the surge arrestor. Then the surge arrestor connected to the long run of toughcable an...
by mistry7
Thu Jan 24, 2019 11:57 am
Forum: General
Topic: Lite5 AC - hardware fault or manufacturing fault ??
Replies: 5
Views: 668

Re: Lite5 AC - hardware fault or manufacturing fault ??

These unit looks like it has seen much humidity, how it is mounted?
by mistry7
Thu Jan 24, 2019 11:04 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60286

Re: ARM devices and NV2 protocol

Really? No way man, Ubnt AC 240-280Mbps on 40Mhz at 8km :P Around 130Mbps at 20MHz...
Mimosa too, but Mikrotik maxes out with 180-190 Mbit @ 40 Mhz
by mistry7
Wed Jan 23, 2019 7:56 pm
Forum: Beginner Basics
Topic: Wireless station - bridge - to lan not working [SOLVED]
Replies: 10
Views: 1607

Re: Wireless station - bridge - to lan not working [SOLVED]

hi
please send here
/interface bridge export
/ip firewall export
I'm not at home atm, at weekend i will post the configs. Thank you.
You need to use Station pseudo bridge
by mistry7
Wed Jan 23, 2019 2:08 pm
Forum: RouterBOARD hardware
Topic: InterCell
Replies: 42
Views: 5001

Re: InterCell

No benefit for us, these licensed Frequency's are impossible to use here in Germany.......
by mistry7
Wed Jan 23, 2019 8:54 am
Forum: Beginner Basics
Topic: Wireless station - bridge - to lan not working [SOLVED]
Replies: 10
Views: 1607

Re: Wireless station - bridge - to lan not working [SOLVED]

What AP is used? Mikrotik too?
Client Isolation active?
by mistry7
Wed Jan 23, 2019 8:46 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60286

Re: ARM devices and NV2 protocol

I have the same idea,but I want to use some stationbox cc xl 19 dbi with 922 card inside.The main reason is that the 90°,120° antennas make too much noise in my tower.The question,is it correct due to the very little opening angle?. Don’t buy Plastic Antennas like Dynadish, look for RF Elements Hor...
by mistry7
Tue Jan 22, 2019 5:25 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60286

Re: ARM devices and NV2 protocol

My old N cpe mikrotik works faster than my new ac cpe.
Mikrotik call this feature......
by mistry7
Sun Jan 20, 2019 2:33 pm
Forum: General
Topic: My wisp network design is strange?
Replies: 2
Views: 485

Re: My wisp network design is strange?

You put every VLAN into a bridge? And then use Bridge Filter for separation?

Why keep it in L2? If you network is getting bigger broadcast will be a problem for you AP‘s
by mistry7
Wed Jan 16, 2019 3:43 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60286

Re: ARM devices and NV2 protocol

Modern protocols are adequate and work really well without Nv2. Nv2 is only needed if you have large legacy networks and need to add more devices to them. The simple answer is that Nv2 is an old solution to an old problem, but modern CPUs are not compatible with it and don't really need it. We need...
by mistry7
Wed Jan 16, 2019 4:10 am
Forum: General
Topic: CRS112-8P-4S-IN What can it power
Replies: 1
Views: 318

Re: CRS112-8P-4S-IN What can it power

Yes, but for 48v you need second power supply (not included)
by mistry7
Wed Jan 16, 2019 1:47 am
Forum: RouterBOARD hardware
Topic: SXTG ac with L4 licence
Replies: 13
Views: 1165

Re: SXTG ac with L4 licence

Horn is not economically profitable for some locations.

Interesting, it seems to me that after the latest updates the army works well.
No it doesn’t....
by mistry7
Wed Jan 16, 2019 12:07 am
Forum: RouterBOARD hardware
Topic: SXTG ac with L4 licence
Replies: 13
Views: 1165

Re: SXTG ac with L4 licence

If you want HQ by RF Elements 30° Horn and Use M11g with AC Module in TPA-RBC

Don’t buy ARM Hardware it is BETA Stadium, don’t work as aspected!
by mistry7
Tue Jan 15, 2019 10:58 pm
Forum: General
Topic: Large deployment suggestions for event
Replies: 13
Views: 1022

Re: Large deployment suggestions for event

Are these AP‘s Controller based?
by mistry7
Tue Jan 15, 2019 8:38 pm
Forum: General
Topic: v7 routeros
Replies: 12
Views: 3154

Re: v7 routeros

Wat Han mir weilen gelacht
by mistry7
Mon Jan 14, 2019 11:04 pm
Forum: General
Topic: Tower Cabling Choice?
Replies: 4
Views: 465

Re: Tower Cabling Choice?

How long is your cable way?
by mistry7
Mon Jan 14, 2019 10:58 pm
Forum: RouterBOARD hardware
Topic: EU and approvment of LHG 60? [SOLVED]
Replies: 8
Views: 1726

Re: EU and approvment of LHG 60? [SOLVED]

Only Lite version - LHG Lite60
Useless Device until smaller channels available
by mistry7
Mon Jan 14, 2019 9:37 pm
Forum: RouterBOARD hardware
Topic: EU and approvment of LHG 60? [SOLVED]
Replies: 8
Views: 1726

Re: EU and approvment of LHG 60? [SOLVED]

From support:

Hello,

Yes! We didn't manage to get CE for RBLHG-60ad therefore we can't sell it in Europe.

Best regards,
Martin Kengis
Only LHG-60AD or LHGG-60AD too?
by mistry7
Mon Jan 14, 2019 10:20 am
Forum: RouterBOARD hardware
Topic: Ethernet ports not working
Replies: 2
Views: 536

Re: Ethernet ports not working

Looks like you are not firewalling your router, and it gets hacked.

1. Google for Netinstall
2. Set new strong Password
3. Set Konfig new from scratch/ no backup
4. read about firewalling
by mistry7
Sun Jan 13, 2019 5:14 pm
Forum: Beginner Basics
Topic: Receiving packets on PPPoE connection and forwarding packets on Eth1
Replies: 1
Views: 248

Re: Receiving packets on PPPoE connection and forwarding packets on Eth1

Depends on hole Config and Address assignment
by mistry7
Sat Jan 12, 2019 4:46 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60286

Re: ARM devices and NV2 protocol

Maybe we should pay open wrt to create arm software. Mikrotik won't solve the problem
Better buy new Hardware, and throw this low cost electronics away
by mistry7
Sat Jan 12, 2019 2:07 pm
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3711

Re: RB4011 wireless performance?

Isn't that almost same numbers as for OpenWRT?
Yes, this gets better in with the last updates, but ROS has serious problem with more than 2 chains, speed does not benefit....
by mistry7
Sat Jan 12, 2019 1:21 pm
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3711

Re: RB4011 wireless performance?

And here Test Macbook to RB911G with ROS 6.43.8 (6.44Beta results are worse)
Macbook to RB911G ROS.png
by mistry7
Sat Jan 12, 2019 10:38 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60286

Re: ARM devices and NV2 protocol

@Mikrotik does not solve the problem. Maybe it's time to try alternative software. Has anyone tried with other software?
For ARM Hardware there is nothing.....
https://openwrt.tetaneutral.net/release ... x/generic/
by mistry7
Fri Jan 11, 2019 9:42 pm
Forum: Wireless Networking
Topic: SXTsq in PTP link don't use chosesn frequency
Replies: 3
Views: 368

Re: SXTsq in PTP link don't use chosesn frequency

Did you use your country setting?
Did you know anything about DFS
by mistry7
Fri Jan 11, 2019 7:48 pm
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3711

Re: RB4011 wireless performance?

Is there any throughput dropout like on the HAP ac2?
no, in my opinion this depends on the used Cihipset,

HAP ac2 has IPQ4018
RB4011 has QCA9884, s in this case WIFI Chipset is not affected....
by mistry7
Fri Jan 11, 2019 3:01 pm
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3711

Re: RB4011 wireless performance?

Put OpenWRT on the wAP AC and with the newer Kernel and drivers you will get about 450MBit Is this something you can prove in a video or something? A post like that would blow up around here I should think. Might get some grease to the squeaky wheels. No WAP ac in Stock so i used 911G-5HPacD with O...
by mistry7
Fri Jan 11, 2019 11:50 am
Forum: Beginner Basics
Topic: receive sensitivity for metal 2
Replies: 5
Views: 434

Re: receive sensitivity for metal 2

please explain for what you need this. With signals weaker then -90 you would not be able to transport anything serious 128kbps using a mobile device would be serious? so why basebox 2 has a receive sensitivity of -100 at 1mbps while metal 52 ac has a receive of -97 if weaker than -90 is useless? T...
by mistry7
Fri Jan 11, 2019 9:59 am
Forum: Wireless Networking
Topic: CAPsMAN issue's
Replies: 9
Views: 798

Re: CAPsMAN issue's

there are some thinks in your config, what i would to in another way.

How much speed is available ?
how much clients at the same time?
by mistry7
Fri Jan 11, 2019 7:55 am
Forum: Wireless Networking
Topic: Backhaul speeds - N only / AC only or mixed mode
Replies: 3
Views: 488

Re: Backhaul speeds - N only / AC only or mixed mode

Yes. It is our infrastructure. I wasn't sure if mixed mode would slow the network if there are no legacy clients. We now have more incoming bandwidth at some of our sites, so I am refining our backhauls to make better use of the bandwidth. I am going to convert some links to Greenfield mode to see ...
by mistry7
Thu Jan 10, 2019 10:29 am
Forum: Announcements
Topic: v6.42.11 [long-term] is released!
Replies: 42
Views: 9039

Re: v6.42.11 [long-term] is released!

What are you trying to achieve here, rextended ? You have always had two choices: 1) Set Country, follow regulations, follow frequency list, output power, trust automatic settings like DFS etc. 2) Set no-country, use manual power, manual frequency, manual all things. So how come something got broke...
by mistry7
Thu Jan 10, 2019 8:58 am
Forum: Wireless Networking
Topic: Problems accessing wAP G-5HacT2HnD
Replies: 13
Views: 629

Re: Problems accessing wAP G-5HacT2HnD

I've created minimum config, bridge receives proper IP, WLAN is working, but again I cannot access the admin interface (works only via Winbox/MAC) - it is the same situation as in QuickSetup with WISP & bridge configuration. So how can I bring up admin interface on bridge / ethernet? Thank you, Bes...
by mistry7
Wed Jan 09, 2019 10:52 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60286

Re: ARM devices and NV2 protocol

802.11ax may change things 802.11ax is useless without Software revolution, but with the delay they have had for AC, we would probably see AX in 2021, ROS 7 could be available..... Why not discuss alternative? They don’t answer anything, so I think they don’t need to sell 802.11 Hardware anymore, a...
by mistry7
Wed Jan 09, 2019 7:07 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60286

Re: ARM devices and NV2 protocol

what are the models and how much are they?
B5 and B5c are PTP Radios

B5 has integrated Antenna and B5c is connector based

https://mimosa.co/products/specs/b5
by mistry7
Tue Jan 08, 2019 11:36 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60286

Re: ARM devices and NV2 protocol

we should return to mikrotik all the arm and be exchanged ... what do you think? I hate this situacion, my clients dont stop to call me... I had to change a lot of equipment We did not deploy much of them, and after our stock with Mispbe is empty we changed brandm They don’t care, why we should care?