Community discussions

MikroTik App

Search found 119 matches

by routik
Wed May 29, 2019 1:36 am
Forum: Beginner Basics
Topic: need to configure mikrotik as a managable switch
Replies: 1
Views: 406

Re: need to configure mikrotik as a managable switch

You are the author of this post https://forum.mikrotik.com/viewtopic.php?f=9&t=146010&p=726735#p726735 and this too https://forum.mikrotik.com/viewtopic.php?f=13&t=148582&p=731388#p731388 , off which all is about the same request. If you still can't do it after some of the responses from the above p...
by routik
Tue May 28, 2019 3:34 pm
Forum: General
Topic: Looking for a good web content filter
Replies: 4
Views: 630

Re: Looking for a good web content filter

Hello Cosimo,
you can go through this MUM presentation & try out any of the options in there. I am sure you will see the option that will serve your intended purpose.

Regards,
by routik
Fri May 24, 2019 11:40 pm
Forum: Beginner Basics
Topic: Cannot see devices in winbox after update
Replies: 4
Views: 994

Re: Cannot see devices in winbox after update

Have you tried it with the newest version of WinBox?
by routik
Fri Mar 15, 2019 11:26 am
Forum: Beginner Basics
Topic: Hotspot Bypass [SOLVED]
Replies: 9
Views: 1362

Re: Hotspot Bypass [SOLVED]

post your IP HOTSPOT HOST & BINDING screen shot/configuration code.
by routik
Sun Mar 03, 2019 7:34 pm
Forum: General
Topic: Cloud Host Router (CHR) and CAPsMAN
Replies: 6
Views: 1489

Re: Cloud Host Router (CHR) and CAPsMAN

Yes, there is no need to pass outgoing traffic via CAPMan.
Just set different/proper GW in the DHCP configuration and voilà ... Internet traffic passes by CHR.
Great thanks
Hi, when you tried this did it work?
Do you mind sharing your setup with us?
by routik
Tue Feb 12, 2019 4:37 am
Forum: General
Topic: Feature suggestion: Repeater + CAP?
Replies: 3
Views: 1419

Re: Feature suggestion: Repeater + CAP?

Please is there any update on the possibility of using repeater or WDS together with CAPSMAN?
by routik
Thu Nov 15, 2018 3:07 pm
Forum: The User Manager
Topic: HotSport with Internal RADIUS authentication issue
Replies: 2
Views: 2358

Re: HotSport with Internal RADIUS authentication issue

Hi,
I configured Mikrotik as hotspot with internal RADIUS Server , it's working fine but each time the client is disconnected/reconnected he is forced to authenticate again.
How can solve this issue ??
Thanks
Did you enable cookie login under hotspot server profile?
by routik
Thu Nov 15, 2018 3:02 pm
Forum: The User Manager
Topic: what is the maximum online user for user manager in mikrotik 5.26 [SOLVED]
Replies: 1
Views: 2363

Re: what is the maximum online user for user manager in mikrotik 5.26 [SOLVED]

Code: Select all

what is the maximum online user for user manager in mikrotik 5.26
what is the maximum online user for user manager in mikrotik 5.26 (installed in workstaion hp z800 ram 10gb- hdd 500g ) ?
Is it based on router license?
by routik
Sat Sep 01, 2018 4:38 pm
Forum: General
Topic: RouterBoard 951Ui 2HnD Website Blocking
Replies: 2
Views: 482

Re: RouterBoard 951Ui 2HnD Website Blocking

You can setup hotspot on the interface your users are connected to, then use Walled Garden IP to bypass facebook & web based whatsapp
by routik
Sat Sep 01, 2018 4:15 pm
Forum: General
Topic: Hotspot with PCC + Advanced Routing Failover
Replies: 6
Views: 632

Re: Hotspot with PCC + Advanced Routing Failover

Al right.
I don't have my own public address. I have to stick with the original Hotspot with PCC.
Thanks for the time taken to explain further in detail.
by routik
Sat Sep 01, 2018 1:23 pm
Forum: General
Topic: Hotspot with PCC + Advanced Routing Failover
Replies: 6
Views: 632

Re: Hotspot with PCC + Advanced Routing Failover

Sorry for my delayed response. But to make this a real benefit, you also have to make sure that each connection keeps using the WAN through which it has been established even if the WAN which it would have chosen normally becomes available again. Won't this take away failover completely if implement...
by routik
Thu Aug 30, 2018 2:10 pm
Forum: General
Topic: Hotspot with PCC + Advanced Routing Failover
Replies: 6
Views: 632

Re: Hotspot with PCC + Advanced Routing Failover

Thanks for your response and more clarifications. What I actually intend to achieve is for the PCC WAN failover to be based on the ability of either WAN1 or WAN2 to ping the internet and not based on when the WAN1 or WAN2 interface is down. The two methods are based on different approaches so you ha...
by routik
Thu Aug 30, 2018 11:38 am
Forum: General
Topic: Hotspot with PCC + Advanced Routing Failover
Replies: 6
Views: 632

Hotspot with PCC + Advanced Routing Failover

Hi, Implementing https://wiki.mikrotik.com/wiki/Manual:Hotspot_with_PCC was straight forward. But integrating https://wiki.mikrotik.com/wiki/Advanced_Routing_Failover_without_Scripting into it is where I am lost. How do I I integrate Advanced Routing Failover into Hotspot with PCC ? The advanced rou...
by routik
Tue Aug 07, 2018 5:23 pm
Forum: Beginner Basics
Topic: bandwidth management
Replies: 3
Views: 517

Re: bandwidth management

You may consider going through this https://mum.mikrotik.com/presentations/US08/janism.pdf
by routik
Wed Aug 01, 2018 2:09 pm
Forum: Wireless Networking
Topic: sxt 2 not connect server
Replies: 6
Views: 894

Re: sxt 2 not connect server

After making your settings (SSID, security, frequency, channel, etc) in the Wlan card of your sxt2 , create a bridge, tie your Wlan and Ethernet card to that bridge, connect a LAN cable between the sxt2 and your server (mikrotik). That's all. Adding ip (in the same range with your server DHCP pool) ...
by routik
Sun Jul 29, 2018 11:55 pm
Forum: The User Manager
Topic: USERMAN WITH REMOTE RADUIS SERVER
Replies: 1
Views: 2007

Re: USERMAN WITH REMOTE RADUIS SERVER

If I can get you clearly, you have a radius server (userman) running on router one and want to use the second router as a radius client connecting to the 1st router? If that is what you mean, then you need a public IP on router with the radius server (userman), since the both routers are not on the ...
by routik
Sun Jul 29, 2018 10:54 pm
Forum: The User Manager
Topic: Allow hotspot users to view their usage statistics while blocking access to the router webfig homepage?
Replies: 2
Views: 2278

Re: Allow hotspot users to view their usage statistics while blocking access to the router webfig homepage?

Alright. Here is what I was able to dig out https://forum.mikrotik.com/viewtopic.php?t=53723 I read where normis said ...If you completely want to disable that page, email support about a branding package, that lets you customize the HTML At least I now know it it possible to have a customized versi...
by routik
Wed Jul 25, 2018 1:28 pm
Forum: The User Manager
Topic: how to access the user page ?
Replies: 2
Views: 2128

Re: how to access the user page ?

Now is the time you have to start making use of the Public ID tag when creating multiple customers admin account. That way, their own users will access their usage statics by simply adding the customer admin public id number at the end of the url like this http://192.168.88.1/user/2 see attached ima...
by routik
Wed Jul 25, 2018 9:39 am
Forum: The User Manager
Topic: Allow hotspot users to view their usage statistics while blocking access to the router webfig homepage?
Replies: 2
Views: 2278

Allow hotspot users to view their usage statistics while blocking access to the router webfig homepage?

Hello, I want my hotspot users to be able to view their usage statistics via the vpn IP of my radius server (which in this case is a mikrotik CHR). But this means they can also access the router login page on port 80 using the same IP address? How do I allow users to access http://192.168.88.1/user ...
by routik
Tue Jul 24, 2018 12:48 am
Forum: General
Topic: cant' activate purchased SSL certificate for hotspot
Replies: 19
Views: 4288

Re: cant' activate purchased SSL certificate for hotspot

I read here https://wiki.mikrotik.com/wiki/Manual:H ... PS_example that
Note: Browser will still warn end-user about redirection even with CA signed certificate! This warning message cannot be avoided.
Can someone kindly explain if this is the true case. Even with CA signed Certificates?
by routik
Mon Jul 23, 2018 10:16 pm
Forum: General
Topic: cant' activate purchased SSL certificate for hotspot
Replies: 19
Views: 4288

Re: cant' activate purchased SSL certificate for hotspot

Hi all, @Michele did you later resolve this issue? I also want to purchase SSL certificate from namecheap and will really appreciate if there can be a comprehensive guide on how to really go about getting a trusted signed SSL certificate on a LAN Hotspot. I already have a domain with namecheap abcdo...
by routik
Sat Jul 21, 2018 12:38 am
Forum: General
Topic: Bandwidth share to multiple login of same user
Replies: 3
Views: 1772

Re: Bandwidth share to multiple login of same user

I will really like to know if there is a solution to the above question>
by routik
Wed Jul 04, 2018 10:33 pm
Forum: General
Topic: New online tool to maker hotspot template
Replies: 1
Views: 9070

Re: New online tool to maker hotspot template

Nice development. Will take a look and try it out.

Sent from my LG-H810 using Tapatalk

by routik
Sat Jun 16, 2018 3:17 pm
Forum: General
Topic: Allow Only www.messenger.com and block facebook.com
Replies: 9
Views: 3403

Re: Allow Only www.messenger.com and block facebook.com

Hi Everyone I'm trying to allow only www.messenger.com and block www.facebook.com but I encountered a problem using layer 7 regex allow ^.+(messenger.com).*$ and deny ^.+(facebook.com).*$ but messenger doesn't load the username and password. I think that messenger.com is connected to facebook.com. ...
by routik
Tue Jun 12, 2018 10:00 pm
Forum: General
Topic: Cannot access some sites [SOLVED]
Replies: 6
Views: 964

Re: Cannot access some sites [SOLVED]

Another thing, I can ping to websites like www.crucial.com from the RB and from my desktop, but cannot access the website never or less.
What about your DNS settings q? What DNS are you using?

Sent from my LG-H810 using Tapatalk

by routik
Fri Jun 08, 2018 5:26 pm
Forum: Beginner Basics
Topic: Mikrotik Hotspot problem [SOLVED]
Replies: 11
Views: 3877

Re: Mikrotik Hotspot problem [SOLVED]

You're welcome. Enjoy your Mikrotik.

Sorry for the long pause..
I'v tried and it worked!

Thank you so much!!!!
by routik
Tue May 29, 2018 6:17 pm
Forum: Beginner Basics
Topic: Mikrotik Hotspot problem [SOLVED]
Replies: 11
Views: 3877

Re: Mikrotik Hotspot problem [SOLVED]

Sorry for the delayed response. I did a fresh config using the details you provided. So here is what you're going to try out reset the router without saving the default config and paste the fresh code I pasted in number 2. 1. Note that this will reset your router without any default configuration an...
by routik
Thu May 24, 2018 5:22 pm
Forum: Beginner Basics
Topic: Schedule disable ethernet interface?
Replies: 15
Views: 2779

Re: Schedule disable ethernet interface?

@sid5632 You're entitled to your opinion. But I didn't change the allocated port. I only added "Guest" as a comment to it, which is what the script works with. Had it been I changed the port name to "Guest", it would have made sense for me to name the scheduler "Disable_Guest". So long as the author...
by routik
Wed May 23, 2018 12:50 pm
Forum: General
Topic: loosing custom default-config after softwareupgrade
Replies: 6
Views: 757

Re: loosing custom default-config after softwareupgrade

hello there, i do since weeks some tr069 testing. - i do a custom default-configuration with netinstall - everything is fine here: BUT if i do a softwareupgrade the custom default configuration is not any more available. any support for this? thank you! christian Kindly explain how you did the soft...
by routik
Wed May 23, 2018 10:58 am
Forum: Beginner Basics
Topic: Schedule disable ethernet interface?
Replies: 15
Views: 2779

Re: Schedule disable ethernet interface?

Hello! I am trying to make a script that disable the eth5 interface from 19:00 to 07:00, any ideas? You can use the below command to do that. 1. Add a comment to the ether5 (e.g WAN2, ISP2, Finance_Department, Guest, Junior_staff, etc) /interface ethernet set [ find default-name=ether5 ] comment=Gu...
by routik
Thu May 17, 2018 5:07 pm
Forum: Beginner Basics
Topic: Mikrotik Hotspot problem [SOLVED]
Replies: 11
Views: 3877

Re: Mikrotik Hotspot problem [SOLVED]

Did you enable ip firewall under settings in bridge?

If no enable it and try again
/interface bridge settings set use-ip-firewall=yes
by routik
Wed May 16, 2018 11:22 am
Forum: Beginner Basics
Topic: Mikrotik Hotspot problem [SOLVED]
Replies: 11
Views: 3877

Re: Mikrotik Hotspot problem [SOLVED]

type the "m" in capital letter (i.e 5M/5M) and try again. And once the user login, check if the user is appearing in the queue list as you can see in the attached file. Since you intend using the same ip pool for the new profile, just leave the new profile Address pool at none. Hello everyone I purc...
by routik
Tue May 15, 2018 12:48 am
Forum: Beginner Basics
Topic: Mikrotik Hotspot problem [SOLVED]
Replies: 11
Views: 3877

Re: Mikrotik Hotspot problem [SOLVED]

Since you intend using the same ip pool for the new profile, just leave the new profile Address pool at none. Hello everyone I purchased a mikrotik hap mini and I currently have version 6.42.1 I bought it mainly to use it as a hotspot service. I reset the mikrotik leaving all the default settings th...
by routik
Mon May 07, 2018 1:37 pm
Forum: General
Topic: Cannot Login to router by IP, but only by MAC
Replies: 15
Views: 10186

Re: Cannot Login to router by IP, but only by MAC

As other posters above have said, more details of what really happened will hasten the help you will receive.
Questions like; is there ip address configured on the interface you're connected to? and is there a firewall rule blocking ip access to the router?....

Sent from my LG-H810 using Tapatalk

by routik
Thu May 03, 2018 11:39 am
Forum: Announcements
Topic: Newsletter #82 (May 2018)
Replies: 38
Views: 14521

Re: Newsletter #82 (May 2018)

How soon will the LtAP mini LTE kit be made available for purchase? It is already available. Unfortunately. Estimated Availability: Second week of May Several other products have had repeated delays, so it's sitting and crying. You know it's May, right :) ? Distributors in my country don't have it ...
by routik
Tue May 01, 2018 12:03 am
Forum: Announcements
Topic: Newsletter #82 (May 2018)
Replies: 38
Views: 14521

Re: Newsletter #82 (May 2018)

How soon will the LtAP mini LTE kit be made available for purchase?
by routik
Wed Apr 25, 2018 6:34 pm
Forum: Beginner Basics
Topic: upgrading RouterOS
Replies: 8
Views: 1330

Re: upgrading RouterOS

In addition, don't forget to upgrade the router firmware to the current one.
by routik
Wed Apr 25, 2018 6:25 pm
Forum: Announcements
Topic: Future of LTE products, user feedback requested
Replies: 137
Views: 40411

Re: Future of LTE products, user feedback requested

We would like to know our customer wishes and use cases on what kind of future LTE technology would be interested in? 1. Which LTE Category you are interested in most - CAT6, CAT7, CAT9, CAT11, CAT12, CAT16 or some other? 2. Which LTE bands and which Carrier Aggregation combinations should be suppo...
by routik
Tue Apr 24, 2018 8:43 am
Forum: Announcements
Topic: Advisory: Vulnerability exploiting the Winbox port [SOLVED]
Replies: 204
Views: 186399

Re: Advisory: Vulnerability exploiting the Winbox port

Change the service port can resolve the problem? The problem with allow from is that not always we have static ip address Suggestions could be that field accept dns names, or allow to read from addressing list Sent from my XT1580 using Tapatalk You may consider using a VPN (PPTP/OpenVPN) to be acce...
by routik
Fri Sep 01, 2017 1:31 am
Forum: Wireless Networking
Topic: Create ip pool,diferent dhcp for wifi
Replies: 3
Views: 1557

Re: Create ip pool,diferent dhcp for wifi

when i try to create dhcp server error : interface is slave
You can't run DHCP on an interface that is already a slave of another interface. Double click on the interface and change the master port to none. see attached screen shot.
by routik
Wed Aug 01, 2012 4:35 pm
Forum: Beginner Basics
Topic: Help: i want to customize hotspot voucher template on v5.19
Replies: 4
Views: 2254

Re: Help: i want to customize hotspot voucher template on v5

your voucher template is cool but its height is long and it looks like it can only print 2 tickets in an A4 paper. when i pasted your html code here , the first table which i believes contains your company name was not displaying. anything. i also saw another way of printing large quantity in one A4...
by routik
Tue Jul 31, 2012 9:21 pm
Forum: Beginner Basics
Topic: Help: i want to customize hotspot voucher template on v5.19
Replies: 4
Views: 2254

Re: Help: i want to customize hotspot voucher template on v5

problem solved. for the sake of other forum members. here is the voucher template i used. (owned by a forum member "skillful" . Thanks to him. <table style="color: black; font-size: 11px;" border="2" height="10"> <tr> <td colspan="2" bordercolorlight="#000000" bordercolordark="#000000"> <b><font siz...
by routik
Tue Jul 31, 2012 8:48 pm
Forum: Beginner Basics
Topic: Help: i want to customize hotspot voucher template on v5.19
Replies: 4
Views: 2254

Re: Help: i want to customize hotspot voucher template on v5

i saw a nice looking voucher template here http://forum.mikrotik.com/viewtopic.php?f=13&t=61827&hilit=voucher+template i could not contact the owner. i wouldn't mind something like that. i don't have basic knowledge of html & css and the default voucher template of v5.19 is scattered when i tried ge...
by routik
Tue Jul 31, 2012 4:29 pm
Forum: Beginner Basics
Topic: Hotspot on RB750
Replies: 2
Views: 1002

Re: Hotspot on RB750

from your explanation, is it on ETH2 you enabled hotspot?
by routik
Tue Jul 31, 2012 4:22 pm
Forum: Beginner Basics
Topic: Help: i want to customize hotspot voucher template on v5.19
Replies: 4
Views: 2254

Help: i want to customize hotspot voucher template on v5.19

I recently upgraded my routers to v5.19 everything seems to be working except that i don't know how to align my ticket voucher to display my company name, up-time limit, validity, amount, etc. attached is a screen shot of what i have so far and the a copy of my voucher script. <table align="center" ...
by routik
Thu Mar 22, 2012 2:18 pm
Forum: General
Topic: URGENT HELP PLEASEEEEE!!!! I WANT TO BE SACKED IF I DONT GET
Replies: 3
Views: 1107

Re: URGENT HELP PLEASEEEEE!!!! I WANT TO BE SACKED IF I DONT

hello Kenny, you will need to redirect your http traffic to your proxy port using dst-nat through /ip firewall nat. that will make your proxy transparent and you don't need to configure any manual proxy again on their computers. as for blocking website, you can do that from the web proxy access menu...
by routik
Thu Nov 10, 2011 4:13 pm
Forum: General
Topic: Yahoomail is very slow in my network
Replies: 9
Views: 1793

Re: Yahoomail is very slow in my network

@Fewi,
ok.
Thanks.
by routik
Thu Nov 10, 2011 3:29 pm
Forum: General
Topic: Yahoomail is very slow in my network
Replies: 9
Views: 1793

Re: Yahoomail is very slow in my network

10 seconds?!? It should be about 1 second! 10 seconds is WAY too long. In Mikrotik, in the PPP, tell it not to use peer-DNS. Then, in IP -> DNS -> Settings put 208.67.222.222 and CLICK Allow Remote Requests. Make sure you ISP dns is not there. Then, reconnect your PC and try going to yahoo mail wit...
by routik
Tue Nov 01, 2011 7:39 pm
Forum: General
Topic: Yahoomail is very slow in my network
Replies: 9
Views: 1793

Re: Yahoomail is very slow in my network

I'm using 208.67.222.222 (opendns) and it opens quickly on mine.

How long does it take to get an answer when you run this in cmd prompt:?

nslookup mail.yahoo.com 1.1.1.1 (replace the ip with your isp dns server)
before 10seconds. are you saying i can use the above dns to replace my ISP dns server?
by routik
Tue Nov 01, 2011 6:49 pm
Forum: General
Topic: Yahoomail is very slow in my network
Replies: 9
Views: 1793

Re: Yahoomail is very slow in my network

It looks like you are indirectly saying that something is wrong with whatever DNS server you are using...
well am using what my ISP gave to me and is only yahoo site that takes time to load(very slow). but with my new static DNS entry, the performance is now better.
by routik
Mon Oct 31, 2011 12:32 pm
Forum: General
Topic: Yahoomail is very slow in my network
Replies: 9
Views: 1793

Re: Yahoomail is very slow in my network

ok,
here is what i did and there was improvement
/ip dns static
add address=MY LAN IP comment="" disabled=no name=*.yahoo.com ttl=1w
anyone using proxy that is experiencing the same issue can try this.

Thanks guys.
by routik
Tue Oct 25, 2011 7:49 pm
Forum: General
Topic: Yahoomail is very slow in my network
Replies: 9
Views: 1793

Yahoomail is very slow in my network

i can't really figure out where the problem is coming from in m y router but yahoo site seems to be very slow in my network(office). it loads fast and normal without mikrotik or if am at home using my home network (no mikrotik) i use hotspot , web proxy and transparent DNS as well in my router confi...
by routik
Wed Aug 24, 2011 1:21 am
Forum: Beginner Basics
Topic: 3 WAN - 1 LAN
Replies: 11
Views: 4629

Re: 3 WAN - 1 LAN

If you're not using hotspot, this may help http://wiki.mikrotik.com/wiki/Load_Bala ... e_Gateways
by routik
Tue Aug 09, 2011 5:24 pm
Forum: General
Topic: problem load balancing over multiple gateways with hotspot
Replies: 18
Views: 4163

Re: problem load balancing over multiple gateways with hotsp

Finally, i did it. http://i51.tinypic.com/14lu4jc.jpg here is the mangle rules i used. 0 ;;; httpTraffic chain=prerouting action=mark-routing new-routing-mark=GLO1 passthrough=no protocol=tcp src-address=10.10.99.0/27 dst-port=80 1 chain=prerouting action=mark-routing new-routing-mark=GLO1 passthrou...
by routik
Wed Aug 03, 2011 6:17 pm
Forum: Beginner Basics
Topic: 2 ISps and 1 LAN load balancing
Replies: 4
Views: 1472

Re: 2 ISps and 1 LAN load balancing

I am not really getting the result i want . i did not mention earlier that my LAN is hotspot and /ip proxy is also enabled which has been affecting my configuration since all traffic will be going out from one IP.. i figured that out from here Load balancing over multiple gateways with hotspot . I j...
by routik
Wed Aug 03, 2011 11:24 am
Forum: General
Topic: problem load balancing over multiple gateways with hotspot
Replies: 18
Views: 4163

Re: problem load balancing over multiple gateways with hotsp

I traveled yesterday and came back late in the night. I came very early this morning and from what i did so far, here is one error i got when i tried to run this code add chain=forward comment="Hotspot HTTPS traffic" in-interface=LAN protocol=tcp dst-port=443 action=mark-routing new-routing-mark=GLO...
by routik
Mon Aug 01, 2011 8:52 pm
Forum: General
Topic: problem load balancing over multiple gateways with hotspot
Replies: 18
Views: 4163

Re: problem load balancing over multiple gateways with hotsp

Thanks so much Fewi, i will do this later today because right now people are much on the Network.
i will report back once am done.
by routik
Mon Aug 01, 2011 8:28 pm
Forum: General
Topic: problem load balancing over multiple gateways with hotspot
Replies: 18
Views: 4163

Re: problem load balancing over multiple gateways with hotsp

Post edited. please confirm.


Thanks.
by routik
Mon Aug 01, 2011 7:21 pm
Forum: General
Topic: problem load balancing over multiple gateways with hotspot
Replies: 18
Views: 4163

Re: problem load balancing over multiple gateways with hotsp

CODES REMOVED. PLS NOTE: the WAN and bridge interface is active for now so they are current doing nothing for me. Please bear with me, i dont know how to use visio or any App used to draw Network diagram. but my network is simple 2 WAN: ISP1 (isp small router) & ISP2 (PPP 3G internet modem PPP clien...
by routik
Mon Aug 01, 2011 2:57 pm
Forum: General
Topic: problem load balancing over multiple gateways with hotspot
Replies: 18
Views: 4163

Re: problem load balancing over multiple gateways with hotsp

Fewi, i really appreciate your time to explain all these to me. Basically here is what i have done so far /ip route add check-gateway=ping comment="ISP1" disabled=no distance=1 \ dst-address=0.0.0.0/0 gateway=172.16.0.1 routing-mark=GLO1 scope=30 \ target-scope=10 add check-gateway=ping comment="ISP...
by routik
Mon Aug 01, 2011 1:44 am
Forum: General
Topic: problem load balancing over multiple gateways with hotspot
Replies: 18
Views: 4163

Re: problem load balancing over multiple gateways with hotsp

I would a) turn off the transparent proxy b) buy a second router and then c) run the Hotspot on a router behind a router dedicated to PCC, with NAT turned off on the Hotspot router. I'd use src-address as the PCC qualifie Hmm...taking a deep breath... why i use proxy is because i use data bundle su...
by routik
Mon Aug 01, 2011 12:26 am
Forum: General
Topic: problem load balancing over multiple gateways with hotspot
Replies: 18
Views: 4163

Re: problem load balancing over multiple gateways with hotsp

Let's say you have a LAN of 192.168.100.0/24 (like in the wiki example), and you're splitting things up so that 192.168.100.0/25 (192.168.100.1 - 192.168.100.127) are going to be marked GroupA and go out WAN A, and 192.168.100.128/25 (192.168.100.128 - 192.168.100.255) are going to be marked GroupB...
by routik
Fri Jul 29, 2011 7:27 pm
Forum: Beginner Basics
Topic: 2 ISps and 1 LAN load balancing
Replies: 4
Views: 1472

Re: 2 ISps and 1 LAN load balancing

You need to setup policy routing. Try these links. http://blog.butchevans.com/2008/09/mikrotik-policy-routing-implementation-example/ http://wiki.mikrotik.com/wiki/Manual:PCC#Policy_routing The first link suits my understanding level and i applied it. it is working for the moment while i make chang...
by routik
Thu Jul 28, 2011 12:36 pm
Forum: Beginner Basics
Topic: 2 ISps and 1 LAN load balancing
Replies: 4
Views: 1472

2 ISps and 1 LAN load balancing

Any help and advice will be highly appreciated. I have two ISPs and one LAN in our office. http://i51.tinypic.com/6h6wt3.jpg i saw this http://wiki.mikrotik.com/wiki/Load_Balancing_over_Multiple_Gateways in the wiki and is close to my case . same gateway 192.168.99.1 same netmask 255.255.255.0 here ...
by routik
Fri Jul 01, 2011 11:09 am
Forum: Beginner Basics
Topic: can't access router homepage due to hotspot
Replies: 9
Views: 8553

Re: can't access router homepage due to hotspot

You can change the port for the router www service to a port besides 80. This worked for me.
/ip service
set www port=8085
Then to access the router
http://10.10.99.1:8085
or for public ip
http://xx.xx.xx.xx:8085
it worked like charm. Thanks so much.
by routik
Thu Jun 30, 2011 12:11 pm
Forum: Beginner Basics
Topic: can't access router homepage due to hotspot
Replies: 9
Views: 8553

Re: can't access router homepage due to hotspot

Here we go. the value xx.xx.xx.xx represents my WAN ip. ( just for security purpose). /interface print detail 0 R name="WAN" type="ether" mtu=1500 1 R name="LAN" type="ether" mtu=1500 l2mtu=1600 2 X name="wlan1" type="wlan" mtu=1500 3 R name="bridge1" type="bridge" mtu=1500 l2mtu=65535 /ip address p...
by routik
Wed Jun 29, 2011 9:36 pm
Forum: Beginner Basics
Topic: can't access router homepage due to hotspot
Replies: 9
Views: 8553

Re: can't access router homepage due to hotspot

/ip firewall nat add action=accept chain=pre-hotspot dst-address=[YOUR WAN ADDRESS] hotspot=auth That will turn off the internal proxy for all authenticated connections going to the router's WAN address. Then use the WAN address to access the graphs. The above rule did not work for me, page unavail...
by routik
Wed Jun 29, 2011 4:47 pm
Forum: Beginner Basics
Topic: can't access router homepage due to hotspot
Replies: 9
Views: 8553

can't access router homepage due to hotspot

I will like to view my bandwidth usage via graph (http://10.10.99.1/graph) but i can't because my entire network is on hotspot and http://10.10.99.1 is the hotspot login/status page, i try using the WAN ip but the web proxy will not allow me as well. i don;t know which other trick or technique i can...
by routik
Wed Jun 29, 2011 4:41 pm
Forum: Beginner Basics
Topic: Newbie needs help or step by step tutorial with Hotspot
Replies: 4
Views: 1240

Re: Newbie needs help or step by step tutorial with Hotspot

See the attaached document, it might be of great help.
by routik
Wed Jun 01, 2011 10:13 pm
Forum: General
Topic: WEP-PROXY SETTINGS [IMPORTANT]
Replies: 11
Views: 2503

Re: WEP-PROXY SETTINGS [IMPORTANT]

That means i don't need to go and enable /ip webproxy ?
yes, i figured it out my self.
by routik
Wed Jun 01, 2011 11:38 am
Forum: The User Manager
Topic: [Solved] Expired user-manager users.
Replies: 14
Views: 12811

Re: Expired users

the solution of scripts that will be deleting expired/uptime tickets have not been provided. please i need it as well.
by routik
Tue May 31, 2011 11:44 pm
Forum: Beginner Basics
Topic: How can i use host winbox on guest mikrotik via vmware
Replies: 9
Views: 7939

Re: How can i use host winbox on guest mikrotik via vmware

i have finally figured this out with Oracle Virtual box and am enjoying it.
by routik
Tue May 31, 2011 1:18 pm
Forum: General
Topic: WEP-PROXY SETTINGS [IMPORTANT]
Replies: 11
Views: 2503

Re: WEP-PROXY SETTINGS [IMPORTANT]

doesn't Hotspot use WebProxy by default? there's a 'Transparent Proxy' checkbox in Hotspot User Profile
That means i don't need to go and enable /ip webproxy ?
by routik
Tue May 31, 2011 12:04 pm
Forum: General
Topic: Bypass hotspot login when using external router
Replies: 11
Views: 8612

Re: Bypass hotspot login when using external router

This config is working and tested by me. as describe above, you will need to put your Mac Address of your Router (WAN Mac Address) (not the Mac Address of LAN) to your hotspot account but hotspot will authenticate your credential "once" after that the rest of your Workstation behind router will be ...
by routik
Tue May 31, 2011 1:31 am
Forum: General
Topic: WEP-PROXY SETTINGS [IMPORTANT]
Replies: 11
Views: 2503

Re: WEP-PROXY SETTINGS [IMPORTANT]

i need advice.
i am running router OS on pc, processor speed is 2.8, memory=512, hard disk=40gig , i use hotspot running on the lan with maximum of 40 clients running at once. i want to use transparent web proxy and dns cache. (please advice).
by routik
Mon May 30, 2011 7:31 pm
Forum: General
Topic: Bypass hotspot login when using external router
Replies: 11
Views: 8612

Re: Bypass hotspot login when using external router

thanks, let say i have 5 Workstation inside behind router, this workstation will not ask hotspot login credential. is this correct? Thanks If you configure your dlink router as dhcp client(WAN port), and your 3 computers is getting ip address from the same dlink router(as DHCP server-Lan port), the...
by routik
Mon May 30, 2011 11:42 am
Forum: General
Topic: Bypass hotspot login when using external router
Replies: 11
Views: 8612

Re: Bypass hotspot login when using external router

if you don't want to use ip binding, then enable mac address authentication in your hotspot server profile and create user with the mac address of your dlink router under users.
by routik
Wed Apr 06, 2011 11:21 pm
Forum: The User Manager
Topic: script that will be deleting uptime/expired tickets
Replies: 2
Views: 1078

Re: script that will be deleting uptime/expired tickets

Thanks for your response and the link provided but at the end no script and will really like to know how that poster figured out the problem.
by routik
Wed Mar 30, 2011 5:39 pm
Forum: The User Manager
Topic: script that will be deleting uptime/expired tickets
Replies: 2
Views: 1078

script that will be deleting uptime/expired tickets

I was wondering if there is any script that will be deleting all my uptime limit/ expired tickets in my userman instead of me doing it manually.

Thanks.
by routik
Mon Feb 21, 2011 11:04 am
Forum: Beginner Basics
Topic: help with HTTP, P2P, STREAMING, VOIP, traffic prioritization
Replies: 9
Views: 2731

Re: help with HTTP, P2P, STREAMING, VOIP, traffic prioritiza

your mangle rules is quite simple in my eyes even though i can't explain them, and you're specifying your LAN IP in it. how did you setup your Queue Tree?
Thanks for your replies so far. the videos are still downloading.
These are my mangle rules.

rgs Pilgrim
by routik
Mon Feb 21, 2011 10:50 am
Forum: Beginner Basics
Topic: help with HTTP, P2P, STREAMING, VOIP, traffic prioritization
Replies: 9
Views: 2731

Re: help with HTTP, P2P, STREAMING, VOIP, traffic prioritiza

Thank you so much. this video link will help me to understand it better. I'm already downloading them.
by routik
Sat Feb 19, 2011 12:07 pm
Forum: Beginner Basics
Topic: help with HTTP, P2P, STREAMING, VOIP, traffic prioritization
Replies: 9
Views: 2731

Re: help with HTTP, P2P, STREAMING, VOIP, traffic prioritiza

i must confess, is not really that easy for me to comprehend. i saw this wiki article http://wiki.mikrotik.com/wiki/Manual:Queues_-_PCQ_Examples , it was quite easy for me to understand, can i combine it with http://wiki.mikrotik.com/wiki/Manual:Connection_Rate ? i have tried to understand the last ...
by routik
Thu Feb 17, 2011 3:26 pm
Forum: Beginner Basics
Topic: help with HTTP, P2P, STREAMING, VOIP, traffic prioritization
Replies: 9
Views: 2731

Re: help with HTTP, P2P, STREAMING, VOIP, traffic prioritiza

Thanks four your reply so far, i stumbled on this and am trying to digest it with the link you posted.
like you said, am playing around already.
as for the bandwidth, is meant for browsing alone nothing else, so i wouldn't mind telling me how best i can determine the share ratio.
by routik
Sat Feb 12, 2011 8:36 pm
Forum: Beginner Basics
Topic: help with HTTP, P2P, STREAMING, VOIP, traffic prioritization
Replies: 9
Views: 2731

help with HTTP, P2P, STREAMING, VOIP, traffic prioritization

I recently installed routerOS on my desktop with two interface WAN and LAN. i am getting 128kbps upload and 512kbpsdownload from my isp (dedicated). i will like to implement dhcp server, hotspot, transparent web proxy, queue with traffic prioritization, L7 filters/L7protocols. i have successfully co...
by routik
Tue Feb 08, 2011 2:26 pm
Forum: Beginner Basics
Topic: How can i use host winbox on guest mikrotik via vmware
Replies: 9
Views: 7939

Re: How can i use host winbbox on guest mikrotik via vmware

I thought someone could come to my aid and help me in figuring out the problem.
by routik
Mon Feb 07, 2011 12:02 am
Forum: Beginner Basics
Topic: How can i use host winbox on guest mikrotik via vmware
Replies: 9
Views: 7939

Re: How can i use host winbbox on guest mikrotik via vmware

i have managed to make the ip work but can't login.

Image

Image

Image
by routik
Sat Feb 05, 2011 1:42 pm
Forum: Beginner Basics
Topic: How can i use host winbox on guest mikrotik via vmware
Replies: 9
Views: 7939

Re: How can i use host winbbox on guest mikrotik via vmware

Why did you use version 2.9 that was the only version i was able to install by my self on vmware 7.0 ip address add address=192.168.56.2/24 interface=ether1 i added the above ip and try to ping it from the host but it was telling me request time out. http://www.techonia.com/access-mikrotik-winbox-v...
by routik
Sat Feb 05, 2011 1:11 pm
Forum: Beginner Basics
Topic: How can i use host winbox on guest mikrotik via vmware
Replies: 9
Views: 7939

Re: How can i use host winbbox on guest mikrotik via vmware

based on my research so far about my post i saw this http://www.techonia.com/access-mikrotik ... virtualbox but try to apply the same method without success.
by routik
Thu Feb 03, 2011 10:00 pm
Forum: Beginner Basics
Topic: How can i use host winbox on guest mikrotik via vmware
Replies: 9
Views: 7939

Re: How can i use host winbbox on guest mikrotik via vmware

Please any help will be highly appreciated. My laptop is the only thing i have for now so i want to start experimenting with basic mikrotik configuration through Vmware
by routik
Thu Feb 03, 2011 11:03 am
Forum: Beginner Basics
Topic: How can i use host winbox on guest mikrotik via vmware
Replies: 9
Views: 7939

How can i use host winbox on guest mikrotik via vmware

Hi all, happy new month. I just manage to install mikrotik 2.9 on vmware workstation 7.0 but i don't know how to connect my winbox (from my win 7 host) to the mikrotik running on top Vmware. the network card is set as bridge when i was installing the mikrotik. any help will be highly appreciated. Th...
by routik
Sun Aug 01, 2010 5:53 pm
Forum: General
Topic: hotspot voucher reloads ticket time if login page refreshes
Replies: 0
Views: 428

hotspot voucher reloads ticket time if login page refreshes

i am having serious problem with my voucher ticket, if there is connection time out or login page refreshes or maybe the switch/router/wireless devices goes off, their ticket(my clients) that has almost finish will start counting afresh from the beginning and has been happening for some time now, an...
by routik
Tue Jul 27, 2010 8:52 pm
Forum: General
Topic: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT
Replies: 28
Views: 3513

Re: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT

Since I can now see that, double click on the route with a destination of 0.0.0.0 and instead of 216.226.64.245 put in the internal IP address of the Untangle server (presumably 192.168.2.1).
thanks so much it worked exactly the way you instructed. you made my week.


thank you so much.
by routik
Sat Jul 24, 2010 9:45 pm
Forum: General
Topic: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT
Replies: 28
Views: 3513

Re: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT

thanks so much for coming in to rescue me
this is the image of the route, so i should delete everything here?

Image



then incase i want to revert back to its formal, i can easily create them back on my own again?



thanks.
by routik
Sat Jul 24, 2010 5:43 pm
Forum: General
Topic: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT
Replies: 28
Views: 3513

Re: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT

I'm hooked please i need you guys help to finish what i have started.
by routik
Sat Jul 24, 2010 3:22 pm
Forum: General
Topic: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT
Replies: 28
Views: 3513

Re: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT

ok! how will i do it?
by routik
Sat Jul 24, 2010 3:01 pm
Forum: General
Topic: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT
Replies: 28
Views: 3513

Re: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT

so do you receive Internet via 'wan' or 'ether1'?
formerly is via wan but now i want it to be from ehter1.
by routik
Sat Jul 24, 2010 2:48 pm
Forum: General
Topic: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT
Replies: 28
Views: 3513

Re: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT

Image

thanks for your concern, waiting for your reply.
by routik
Sat Jul 24, 2010 2:29 pm
Forum: General
Topic: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT
Replies: 28
Views: 3513

Re: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT

please how do i add the rule from here?

Image
by routik
Sat Jul 24, 2010 12:31 pm
Forum: General
Topic: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT
Replies: 28
Views: 3513

Re: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT

i tried it,it picked IP automatically including DNS of the untangle and was able to login to the hotspot through wifi but could not open webpage. what could be the course?
by routik
Fri Jul 23, 2010 9:59 pm
Forum: General
Topic: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT
Replies: 28
Views: 3513

Re: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT

ok, i post my output when i try it out.
i pray it works out for me.

thanks for your kind support.
by routik
Fri Jul 23, 2010 9:45 pm
Forum: General
Topic: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT
Replies: 28
Views: 3513

Re: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT

But you already have a public IP address on the WAN interface. Can't your Hotspot clients get on the Internet through that? that was when miktrotik was serving as my server now am using untangle server but still needs the mikrtotik hotspot biller for my wifi . see the image below, so if i do it lik...
by routik
Fri Jul 23, 2010 9:33 pm
Forum: General
Topic: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT
Replies: 28
Views: 3513

Re: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT

Are you expecting clients behind the 'laptop' interface to get IP addresses in the range of 192.168.2.0/24? no no no! laptop clients (hotspot port) on the laptop has already been configured to be giving out IP 192.168.1.1 which is ok by me but my proble is to use ether 1 port as dhcp client to brin...
by routik
Fri Jul 23, 2010 8:57 pm
Forum: General
Topic: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT
Replies: 28
Views: 3513

Re: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT

i am very very grateful for your kind support. the images below shows the output of the above commands you instructed i should run. as for the untangle sever, it's a server that has two network cards, one is connected to the internet modem (Idirect modem) and the second is connected to the switch, s...
by routik
Fri Jul 23, 2010 7:53 pm
Forum: General
Topic: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT
Replies: 28
Views: 3513

Re: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT

i am really nervous to do something i dont even uderstand, below is the image display of my router when i logged in, the IP address of the linux server (DHCP server) is 192.168.2.0-192.168.2.255, please can you tell me where to go in the winbox and inout this in my ether1 port and also make it work ...
by routik
Fri Jul 23, 2010 6:43 pm
Forum: General
Topic: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT
Replies: 28
Views: 3513

Re: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT

The manual contains an example setup that walks through the entire configuration - just replace your interface names and IP addresses.
i can only access my router via winbox, dont know anything in coding for now thats why i am finding it difficult.

thanks for your concern and reply so far.
by routik
Fri Jul 23, 2010 5:03 pm
Forum: General
Topic: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT
Replies: 28
Views: 3513

Re: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT

thanks for your reply i really appreciate, like i said earlier on, i am a complete novice in this and it wont be easy for me to understand the above manual just like that.
by routik
Fri Jul 23, 2010 4:55 pm
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 438
Views: 315891

Re: Sample Hotspot Page - Sticky Please

Es lo que hay , no le dedique mucho tiempo pero quedo mas o menos presentable

Image
i like your hotspot login page, can i get edited copy with my internet cafe name, contact info, and browsing rate price info.
thanks.
by routik
Fri Jul 23, 2010 3:54 pm
Forum: General
Topic: (HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT
Replies: 28
Views: 3513

(HELP) I WANT TO CONFIGURE ETHER1 PORT AS DHCP CLIENT

I am running an untangle as my server and using Mikrotik hotspot for my wireless biller, but the problem am having now is hto to configure one of the mikrotik ports as DHCP client to be collecting from the untangle server and then giving out to hotspot clients. though i have tried searching for how ...
by routik
Mon Mar 15, 2010 6:26 pm
Forum: Beginner Basics
Topic: How can i change my DNS static IP address through winbox GUI
Replies: 7
Views: 9614

Re: How can i change my DNS static IP address through winbox GUI

If that is what they issued, then stay with that. If you have only a public ip in the router, then you won't be able to access 192.168.x.x ips unless you route them. Give me a second to find routes in Winbox. ADD: It should be a selection under the "IP" tab. thanks so much just tell me on how am go...
by routik
Mon Mar 15, 2010 6:03 pm
Forum: Beginner Basics
Topic: How can i change my DNS static IP address through winbox GUI
Replies: 7
Views: 9614

Re: How can i change my DNS static IP address through winbox GUI

Did you enter the gateway in "/ip route"? /ip route add gateway=216.226.64.245 I think network should be 216.226.64.244 The broadcast should be 216.226.64.247 ...if my network math is correct. please where can i locate the ip route? concerning the IP address, that what my ISP gave me, is working my...
by routik
Mon Mar 15, 2010 5:34 pm
Forum: Beginner Basics
Topic: How can i change my DNS static IP address through winbox GUI
Replies: 7
Views: 9614

Re: How can i change my DNS static IP address through winbox GUI

here is the full detail of what i have before and what i did this is the IP Address my ISP gave me IP address = 216.226.64.246 Subnet mask= 255.255.255.252 Gateway= 216.226.64.245 DNS server = 216.226.64.245 alternate DNS server = 204.14.40.44 now based on my image below, i was using linux server be...
by routik
Sat Mar 13, 2010 12:38 am
Forum: Beginner Basics
Topic: How can i change my DNS static IP address through winbox GUI
Replies: 7
Views: 9614

Re: How can i change my DNS static IP address through winbox GUI

in winbox open: IP->ADDRESS when window opens, you can add press "+" to add new ip address. file the fields there, choose correct interface your ISP is connected to and apply, check if everything is OK with settings, using ping try to ping ISP gateway (TOOLS -> PING) Then go to IP-> DNS, when windo...
by routik
Thu Mar 11, 2010 5:50 pm
Forum: Beginner Basics
Topic: How can i change my DNS static IP address through winbox GUI
Replies: 7
Views: 9614

How can i change my DNS static IP address through winbox GUI

hi all, we just changed ISP and i have new IP address and DNS address, now i have logged in through winbox but i need detailed step by step guide on how i will create a new Static DNS IP for my new ISP, then chnage my WAN IP to the one of my new ISP. I will really appreciate if i can get detailed st...
by routik
Thu Oct 15, 2009 7:39 pm
Forum: General
Topic: Something is eating up my bandwidth. HELP
Replies: 5
Views: 952

Re: please i need help and advice.

in your firewall, block all the ports and allow only some few useful ports like 80, 443,21,25, 5050 and others
thanks brother.

thanks
by routik
Thu Oct 15, 2009 5:24 pm
Forum: General
Topic: Something is eating up my bandwidth. HELP
Replies: 5
Views: 952

Re: please i need help and advice.

while i was waiting for replies, i browsed some links in this forum and saw this links that might be helpful to me http://wiki.mikrotik.com/wiki/Firewall http://wiki.mikrotik.com/wiki/How_to_autodetect_infected_or_spammer_users_and_temporary_block_the_SMTP_output http://wiki.mikrotik.com/wiki/Bad-ho...
by routik
Thu Oct 15, 2009 12:26 pm
Forum: General
Topic: Something is eating up my bandwidth. HELP
Replies: 5
Views: 952

Re: please i need help and advice.

you may use Tools -> Torch and look for any unexpected traffic
please how can i set it. here is the diagram when i opened it.

Image


thanks for your reply
by routik
Wed Oct 14, 2009 5:57 pm
Forum: General
Topic: Something is eating up my bandwidth. HELP
Replies: 5
Views: 952

Something is eating up my bandwidth. HELP

hi everyone, i am having serious network issues with my router and my network as a whole, my network is slow in browsing and fast a times, now when it slows down i restart the modem, it will pick in several occassions. am using mikrotik router which a network admin helped me in configuring and the b...